News at MIDO from Satisloh › ... › contents › News › PI_Sat… · Web viewSatisloh...
3
Press Release Satisloh’s VFT-orbit 2 raises the bar again! A few years ago, Satisloh changed the generating playing field with their high-volume VFT-orbit – quickly establishing itself as the world’s best-selling digital generator. The company is raising the bar that their high-volume flagship generator set with the introduction of the VFT-orbit 2. The fully-automated VFT-orbit 2 is the world’s fastest, easiest to service and most robust generator. Several innovations make the VFT-orbit 2 incredibly fast. A high performance milling spindle for cribbing and rough surfacing improves speed and throughput up to 20%. Also the proprietary milling tool interface for the 14-tooth cutter enables 60% higher revolution speed and guarantees unsurpassed accuracy and stiffness, reduced run-out and extended tool life. The new design not only differs visually from the old one, but also makes service and maintenance easier. It has a round, LED-illuminated working chamber so operators can easily clean and maintain the machine as well as see process steps clearly. A new machine base design offers installation options, with the choice of either left or right drainage, as well as ergonomically better access to utility connections. Another design feature making the VFT-orbit 2 even better than its predecessor is Satisloh’s new proprietary tool holder with an optional Satisloh AG Neuhofstrasse 12 CH - 6340 Baar Phone +41 (0)41 766 16 16 Fax +41 (0)41 766 16 10 www.satisloh.com [email protected]
Transcript of News at MIDO from Satisloh › ... › contents › News › PI_Sat… · Web viewSatisloh...
Press Release
Satisloh’s VFT-orbit 2 raises the bar again!
A few years ago, Satisloh changed the generating playing field with their high-volume VFT-orbit – quickly
establishing itself as the world’s best-selling digital generator. The company is raising the bar that their
high-volume flagship generator set with the introduction of the VFT-orbit 2. The fully-automated VFT-
orbit 2 is the world’s fastest, easiest to service and most robust generator.
Several innovations make the VFT-orbit 2 incredibly fast. A high performance milling spindle for cribbing
and rough surfacing improves speed and throughput up to 20%. Also the proprietary milling tool
interface for the 14-tooth cutter enables 60% higher revolution speed and guarantees unsurpassed
accuracy and stiffness, reduced run-out and extended tool life.
The new design not only differs visually from the old one, but also makes service and maintenance
easier. It has a round, LED-illuminated working chamber so operators can easily clean and maintain the
machine as well as see process steps clearly. A new machine base design offers installation options, with
the choice of either left or right drainage, as well as ergonomically better access to utility connections.
Another design feature making the VFT-orbit 2 even better than its predecessor is Satisloh’s new
proprietary tool holder with an optional integrated cooling system. This allows processing all materials
with highest accuracy and lowers tool costs.
Improving its robustness is a new V10 B-axis with an electrical plug-in system that makes maintenance
easy.
A power-save mode automatically turns off air bearings when the machine is idle, resulting in up to 20%
overall energy savings.
Satisloh’s innovative engineering once again raises the bar for digital generating. For more information
visit the Satisloh website on www.satisloh.com
Satisloh AGNeuhofstrasse 12CH - 6340 Baar
Phone +41 (0)41 766 16 16Fax +41 (0)41 766 16 10
Baar, 26.02.2016
No. of letters (incl. spaces): 1849 words
Pictures:
(1) VFT-orbit 2 generator (2) VFT-orbit 2 orbital aligned working chamber
(3) VFT-orbit 2 water-cooled turning tip (4) VFT-orbit 2 high speed milling cutter
(5) VFT-orbit 2 engraving
For further information please contact:
Nicole FaustInt. Marketing ManagerSatisloh AGNeuhofstrasse 12CH-6340 Baar
Phone: +41 41 766 16 20Fax: +41 41 766 16 10Email: [email protected]
