New Woodworking Machines Digital Catalogue

CALL EXCEL TODAY : +44 (0) 24 7636 5255

Machine Tools

NEW WOODWORKING

CIRCULAR SAWS | VERTICAL BANDSAWS CHOP SAWS | BELT DISC SANDERS BENCH WOOD LATHES |DRY GRINDER EDGE MILLING MACHINES PLANER THICKNESSER & LOTS MORE

‘ALWAYS EXCEL’www.excelmachinetools.co.uk

MACHINES

NEW RANGE

INDEXINDEXINDEXPRODUCTPRODUCTPRODUCT

Planer Thicknesser 3-6 Lathes 7-9 Saws 10-24Sawing Milling Thicknesser 25Edge Milling Machines 26-27Grinders 28-30Sanding Machines 31-49Edge Banding Machines 50-51Slot Mortising Machine 52Spindle Moulder 53Air Filter/Suction 54-62

EXCEL’S MACHINES

EXCEL’S ACCESSORIES/TOOLS

4 Jaw Chuck Kit, 3 PC Carrier Kit,

8 Pc Turning Tool Set,

Copying Attachments 63

Accessories / Tools

Saw/Mill Thicknesser

Saws

Planer Thicknesser

Air Systems

Always excellent ....QualityAlways excellent ....Value

Always excellent ....Service

ALWAYS EXCEL

Milling Machines

Grinders

Banding Machines

Sanders

Slotting Machines

Spindle Moulder

Lathes

Surface Planing & Thickness

Model ADH 200 1ph

Call us now on +44(0)24 7636 5255Visit our website: www.excelmachinetools.co.uk

Excel Planing Thickness Machines

NEW RANGE

‘ALWAYS EXCEL’ Specification ADH 200

Maximum Planing Width 204mmMin/Max. Working Height 5/120mmMaximum Chip Removal 2mmNumber of Cutter Blocks 2Cutter Block 50mmSpeed 8500min-1Motor Power 230V/50Hz -1.5KwPlaning Table Dimensions 737x210mmThicknessing Table Dimensions 255x204mmParallel Stop 590x102mmSuction Nozzle 58mmMachine Dimensions 80x45x40cmMachine Weight 29 Kg

Model ADH 200 0590-5200

For angular joining (90°) and exact planing of massive wood, boards, planks and battens.Easy and precise adjustment of the chip removal while thickening accurate to dimension. From up to 2mmAutomatic work piece feed. Toothed steel infeed roller for uniform and constant infeed of wood. Rubberised infeed and extraction rollers spare the wood surface when thicknessing. Infinitely inclinable aluminium planing stop. From 0° up to 45°. Joiner table made of milled aluminium cast. Cutter block includes 2 rapid steel plane irons. Powerful 230 volt motor. Inter-changeable chip suction hood

CBaker

Typewritten Text

Page 3


Model ADH 250 1ph


Excel Surface Planing & Thickness

Model ADH 250 0590-5250

NEW RANGE

Specification ADH 250Maximum planing width 254mmMin/Max. working height 6/160mmMaximum chip removal 2mmNumber of cutter blocks 2Cutter block dia. 50mmSpeed 8500 min-¹Motor power 230V/50Hz 1.5kWPlaning table dimensions (LxW) 1050x260mmThicknessing table (LxW) 450x254mmParallel stop 610x122mmSuction nozzle 80mmMachine weight 40KgMachine dimensions (LxWxH) 1150x500x570mm

MACHINE FEATURES

For angular joining (90°) and exact planing of massive wood, boards, planks and battens.Easy and precise adjustment of the chip removal while thickening accurate to dimension.From up to 2mm. Automatic work piece feedToothed steel infeed roller for uniform and constant infeed of wood. Rubberised infeed and extraction rollers spare the wood surface when thicknessing. Infinitely inclinable aluminium planing stop . From 0° up to 45°. Joiner table made of milled aluminium cast. Cutter block includes 2 rapid steel plane irons. Powerful 230 volt motorInter-changeable chip suction hood

Excel Surface Planing & ThicknessExcel Surface Planing & Thickness

‘ALWAYS EXCEL’

CBaker

Typewritten Text

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 4


Model ADH 260 1ph


Excel Surface Planing & Thickness

‘ALWAYS EXCEL’

Specification ADH 260

Dimensions (LxW) Planing Tables 1030x280mmDims (LxW) Thicknessing Table 260x400mmMaximum Working Width 260mmMaximum Chip Removal 3mmCutter Block dia. 63mmNumber of Cutter Blocks 2Cutter Block Speed 6500 min-¹Feed Speed 5m/minSpeed 2800min-¹Motor Power 50Hz 2.0kW/230VSuction Nozzle dia. 100mmMachine Weight 66 Kg

Model ADH 260 0590-3260

MACHINE FEATURES

For angular joining (90°) and exact planingEasy and precise adjustment of chip removal of up to 3mm for thicknessing accurate to dimension. Automatic work piece feed (5m/min)Toothed steel infeed roller for uniform and constant infeed of wood. A rubberised outlet roller spares the surface while thickening. Easily adjustable for aluminium planing stop, inclinable by 90° to +45°. Largely dimensioned planing table made of ribbed aluminium die castCutter block including 2 rapid steel plane ironsLarge thickening table made of grey cast iron with ground surface, mounted on 4 x bearings.Emergency stop switch. Integrated, interchangeable chip suction hood

NEW RANGE

CBaker

Typewritten Text

Page 5

Surface Planing & Thickness Machine

Model ADH 310 3ph


Excel Planing Thickness Machines

Included as standard:* Setting gauge for plane irons* Cutter block including 3 x rapid steel plane irons* Grooved working table for little frictional resistance

BUY WITH CONFID

ENC

E

Model ADH 310 0590-3300

Specification ADH 310

Planing table dimensions 605x330mm Thicknessing table dimensions 520x312mm Maximum working width 310mm Maximum height passage 250mm Maximum chip removal 3mm Number of cutter blocks 3 Cutter block dia. 70mm Cutter block speed 5300min-1 Feed speed 7m/min Suction nozzle dia 100mm Motor power 50Hz 2.75kW/400V Machine dims(LxWxH) 1300x1000x1300mm Weight 170 Kg

To plane massive wood boards, planks and battened. Thicknesser for exact, angular planning of smooth surfaces. Toothed steel infeed roller for uniform and constant infeed of wood. Quadruple precision guided thicknessing table smoothly adjustable by means of a large hand wheel. Rubber output roller gentle to the surface of the work piece during thicknessing. Digital height display of the thicknessing table with measuring scale up to 20cm allowing comfortable thicknessing. Largely dimensioned planning table made of ribbed aluminium die cast. Large thickening table made of grey cast iron with ground surface, mounted on 4 x bearings. Lockable emergency stop button. High performance durable chain drive of the infeed and extraction roller.

WIT

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

Page 6

Small Wood Turning Lathe

Model DB 450 1ph


‘ALWAYS EXCEL’

Excel Wood Turning Lathe

Specification DB 450

Maximum Turning dia. 254mmCentre Height 127mmCentre width 450Spindle Head Thread M33x3.5Speeds 500-3150min-¹Speed Stages 4Motor Power 50Hz 370W/230VMorse Taper MT2Machine Dimensions (LxWxH) 82x43x30cmMachine Weight 35 Kg

BUY WITH CONFID

ENC

E

NEW RANGE

Torsion-resistant grey cast iron engine bed provides for high smoothness of running and accuracy.Tailstock and headstock also made of stable grey cast iron. Includes easily adjustable tool rest.Available with distance between centres 1000mm (optional). Tailstock (stroke 50mm) including follow lathe centre as standard. Tailstock sleeve with hole to process long work pieces. Speed adjustment, 4 speeds with V-belt

Model DB 450 0592-0450

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 7

Wood Turning Lathe

Model DB 900 1ph


Excel Wood Turning Lathes

Specification DB 900

BUY WITH CONFID

ENC

E

Wood Turning Lathe

‘ALWAYS EXCEL’

NEW RANGE Model DB 900 0592-0900

Maximum turning dia 306mmCentre height 153mmCentre width 900mmSpindle head thread M33x3.5Speeds 500-2000 min-¹Speed stages Variable, 10 stagesMotor power 50Hz - 550W/1-50HzMorse taper MT2Dimensions 138x33x37cmMachine weight 80 Kg

Included as standard:

* Face plate 15cm* Follow tailstock centre* Four prong face driver

Torsion resistant grey cast iron engine bed provides for high smoothness of running & accuracy. Tailstock and spindle stock made of grey cast iron. Wide, easy to adjust tool rest. Tailstock with quick action lever and hand wheel. Tailstock (stroke 50mm) inc. follow lathe centre as standard. Tailstock sleeve with hole to process long work pieces. Variable speed regulation with digital speed display. Headstock can be turned by 180°. Lockable emergency stop-button

CBaker

Typewritten Text

Page 8

Wood Turning Lathe

Model DB 1100 1ph


Excel Wood Working Machines

Specification DB1100

Maximum Turning dia. 358mmCentre Height 179mmCentre Width 1100Spindle Head Thread M33x3.5Speeds 500-2000min-¹Speed Stages Variable, 10 stepsMotor Power 50Hz 750W/1 - 50HzMorse Taper MT2Machine Dimensions (LxWxH) 162x34x43cmMachine Weight 92 Kg

BUY WITH CONFID

ENC

E

Included as standard:* 15cm Face Plate* Follow Tailstock Centre* 4 Prong Face Driver

NEW RANGE

Model DB 1100 0592-1100

‘ALWAYS EXCEL’

Torsion resistant grey cast iron engine bed provides for high smoothness of running & accuracy. Tailstock and spindle stock made of grey cast iron. Wide, easy to adjust tool restTailstock with quick action lever and hand wheel.Tailstock (stroke 50mm) inc. follow lathe centre as standard. Tailstock sleeve with hole to process long work pieces. Variable speed regulation with digital speed displayHeadstock can be turned by 180°. Lockable emergency stop-button

CBaker

Typewritten Text

Page 9

VERTICAL BANDSAW Model HBS 251 1ph

Excel Vertical Bandsaws


‘ALWAYS EXCEL’BUY W

ITH CONFIDEN

CE

Specification HBS 251Max. Cutting Width 245 mmMax. Cutting Height 120 mmCutting Speed 696 m /min Saw Blade Length 1790 mmTable Size 290 x 290 mmMotor Power 50 HZ 350 W / 230 VSuction Nozzle Dia. 58 mmMachine dimensions (LxWxH) 42x33x88cmMachine weight 32 Kg

BUY WITH CONFID

ENC

E

Model HBS 251 0590-0251

Wrap resistant structure.Safe & clean saw cuts in wood, plastic material and non-ferrous metalsThe heavy vast working table with ground surface can be inclined from 0-45°.Powerful motor.Safety switch switches OFF when opening the door With precise 3 roller saw belt guiding at the top and bottom. Aluminium longitudinal stop with eccentric quick clamping and scale. The saw table on a rocker seat is infinitely inclinable from 0-45° with a scale showing the pre-set slope. Flywheels running precisely on bearings made of aluminium die cast with special leggings for higher lifetime of the saw belt

NEW RANGE

CBaker

Typewritten Text

Page 10

VERTICAL BANDSAW Model HBS 351-2 | 351 1ph



‘ALWAYS EXCEL’

Specification HBS 351-2 1PH

Max. Cutting Width 345 mmMax. Cutting Height 200 mmCutting Speed 438 /900 m /min Saw Blade Length 2490 mmTable Size 548 x 400 mmMotor Power 50 HZ 1000 W / 230 VSuction Nozzle Dia. 100 mmMachine Dimensions (LxWxH) 52x38x115cmMachine Weight 70 Kg



ALWAYS EXCEL

Model HBS 351 0515-3501

Model HBS 351-2 0590-0351

Specification HBS 351 1PH Working table dimensions 495 x 356mmCutting speeds 650/400m/minFlywheel 356mmMaximum cutting height 200mmMax cutting width with stop 321mmMax cutting width without stop 346mmSaw belt length 2562mmPrecision guiding 3 rolls Top/bottomSaw bench inclination - 10° +45°Motor power 230V/50Hz/P2 550 watts/230VWeight 80 KgDimensions 61x44x175cmSuction nozzle dia. 100mm

NEW RANGE

CBaker

Typewritten Text

Page 11

VERTICAL BANDSAW Model HBS 400 1ph



‘ALWAYS EXCEL’

BUY WITH CONFID

ENC

E

Specification HBS 400

Max. Cutting Width 416 mmMax. Cutting Height 305 mmCutting Speed 460 / 980 m /min Saw Blade Length 3378 mmTable Size 530 x 480 mmMotor Power 50 HZ 1500 W / 230 VSuction Nozzle Dia. 2 x 100 mmMachine Dimensions (LxWxH) 76x52x175cmMachine Weight 135 Kg

Model HBS 400 0590-0410

MACHINE FEATURES

Saw belt quick changing via eccentric lever at the rear of the machine without changing thebasic tension settings. Flywheels made of grey cast guarantees smooth running. Easy tilting of the table from 0-45° via rocker seat.Includes smooth running aluminium parallel stop with quick acting closure on a solid round bar guiding.

NEW RANGE

CBaker

Typewritten Text

Page 12

VERTICAL BANDSAW Model HBS 431 1ph | HBS 433 3ph



‘ALWAYS EXCEL’


Model HBS 431 0515-4301

Model HBS 433 0515-4303

Specification HBS 431Working table dimensions 610 x 431mmCutting speeds 900/450m/minFlywheel 430mmMaximum cutting height 270mmMax cutting width with stop 370mmMax cutting width without stop 410mmSaw belt length 3345mmPrecision guiding 3 rolls Top/bottomSaw bench inclination - 10° +45°Motor power 230V/50Hz/P2 1.5kW/230VWeight 130 KgDimensions 76x51x204cmSuction nozzle dia. 2 x 100mm

Working table dimensions 610 x 431mmCutting speeds 900/450m/minFlywheel 430mmMaximum cutting height 270mmMax cutting width with stop 370mmMax cutting width without stop 410mmSaw belt length 3345mmPrecision guiding 3 rolls Top/bottomSaw bench inclination - 10° +45°Motor power 230V/50Hz/P2 1.5kW/400VWeight 130 KgDimensions 76x51x204cmSuction nozzle dia 2 x 100mm

NEW RANGE

CBaker

Typewritten Text

Page 13

VERTICAL BANDSAW Model HBS 533S 3ph | HBS 533 3ph



‘ALWAYS EXCEL’

BUY WITH CONFID

ENC

E

Specification HBS 533SWorking table dimensions 750x530mmCutting speeds 1400m/minFly wheel 530mmMaximum cutting height 350mmMax cutting width with stop 465mmMax cutting width without stop 510mmSaw belt length 4190mmPrecise guiding Top/bottomSaw bench inclination 0-45°Motor power 400V/50Hz/P2 3.75kWMachine weight 305 KgMachine dimensions 100x72x204cmDia. of suction nozzle dia. 2x100mm

Model HBS 533S 0515-5313

Model HBS 533 0515-5303


Working table dimensions 680 x 530mmCutting speeds 850/430m/minFlywheel 530mmMax cutting height 270mmMax cutting width with stop 474mmMax cutting width without stop 514mmSaw belt length 3865mmPrecision guiding 3 rolls Top/bottomSaw bench inclination - 10° +45°Motor power 230V/50Hz/P2 2.25kW/400VWeight 163 KgDimensions 102x79x204cmSuction nozzle dia. 100mm

NEW RANGE

CBaker

Typewritten Text

Page 14

VERTICAL BANDSAW Model HBS 633S 3ph

Excel Vertical Bandsaw


‘ALWAYS EXCEL’

Model HBS 633S 0515-6303

Specification HBS 633SWorking table dimensions 850 x 600mmCutting speeds 1615m/minFlywheel 630mmMaximum cutting height 400mmMax cutting width with stop 570mmMax cutting width without stop 610mmSaw belt length 4600mmPrecision guiding Top/bottomSaw bench inclination 0° -45°Motor power 400V/50Hz/P2 3.75kWWeight 380 KgDimensions 119x75x206cmSuction nozzle dia 2x100mm

BUY WITH CONFID

ENC

E

High dead weight for maximum smooth runningVery smooth & precise running due to torsion-resistant machine housing. Largely dimensioned grey cast saw bench made of one piece, slewable from 0° to + 20°with ground and polished surface. Patented table inclination device with hand wheel and toothed rod.Quick action tensioning of the saw belt.Precise saw belt roller guidingLarge grey cast parallel stop. Rapid & precise adjustment of cutting height via hand wheel and toothed rod with millimetre scale. Safety switch for automatic switch-off when opening door. Large grey cast parallel stop. With angular stop as standard

NEW RANGE

CBaker

Typewritten Text

Page 15

Circular Table Saw

Model FKS315-1500E 3ph


Excel Circular Table Saws

Specification FKS315 - 1500E



ALWAYS EXCEL


BUY WITH CONFID

ENC

E

Maximum Saw blade dia. 315mmMaximum cutting height 45°/90° - 75/100mmCutting width with stop 940mmSaw blade inclination 0-45°Table dimensions (LxW) 350x760mmTrimming length 1370mmTable elongation 350x500mmSpeed 4250 min-1Motor power 400V/50Hz 3.0kWSuction nozzle Top: 40mm/ Bottom: 100mmMachine weight 194 Kg

* Format sliding table inc. extension

* Trimming shoe

* Parallel stop with round rod guide

* Saw blade protective hood including suction hose

Model FKS315-1500E 0590-0315

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

Page 16

Circular Table Saw

Model FKS315-2000E 3ph


‘ALWAYS EXCEL’

Excel Circular Table Saws

Specification FKS315-2000E

Model FKS315-2000E 0590-0317

BUY WITH CONFID

ENC

E

Maximum saw blade dia 315mm Maximum cutting height 45°/90° - 75/100mm Cutting width with stop 1350mm Saw blade inclination 0-45° Table dimensions (LxW) 385x800mm Trimming length 2000mm Table elongation 310x500mm Speed 4500 min-1 Motor power 400V/50Hz 4.0kW Suction nozzle Top: 40mm/ Bottom: 100mm Machine weight 275 Kg

Included as standard:* Aluminium sliding table* Material roll on boom* Parallel stop with round rod guide* Table length extension* Table width extension* Fold stop* Trimming shoe* Eccentric clamp

NEW RANGE

CBaker

Typewritten Text

Page 17

CIRCULAR TABLE SAW

Model TKS 250 SC 3ph


Excel Woodworking Table Saws

Specification TKS 250 SC



ALWAYS EXCEL

Maximum Saw blade dia. 254mmMaximum cutting height 45°/90° - 42/80mmCutting width with stop 900mmSaw blade inclination 45/90°Mitre stop 45° (left/right)Table dimensions (LxW) 800x348mmTable height 895mmTrimming length 1300mmTable elongation 800x355mmSpeed 4000 min-1Motor power 400V/50Hz 2.5kWSuction nozzle Top: 38mm/ Bottom: 100mmMachine dims 95x76x103cmMachine weight 190 Kg

Included as standard:* Format sliding table inc. extension* Trimming shoe* Parallel stop* Saw blade protective hood

including suction hose* Table extension inc. support foot* Carbide saw blade 250mm/36 teeth

Model TKS 250 SC 0590-0255

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

Page 18

CIRCULAR SAW

Model TKS 315 Pro Prof. 1ph | 3ph


Excel Circular SawsExcel Circular Saws

‘ALWAYS EXCEL’

BUY WITH CONFID

ENC

E

TKS 315 Pro Prof. 1PH 0590-3251

Specification TKS 315 Pro Prof 1PH/3PH

TKS 315 Pro Prof. 3PH 0590-3253

Maximum saw blade dia 315mmMaximum cutting height 90/45° 90/50mmSaw blade inclination 0-45°Table dimensions (LxW) 800x550mmTable height 810mmSpeed 2800 min-¹Motor power 50 Hz 230V - 2.2 Kw 400V - 2.8 KwMachine dimensions (LxWxH) 200x136x100cmMachine weight 44 KgSuction nozzle dia. Top 38mm/ Bottom 100mm

Included as standard:* Chassis* Sliding carriage* Table elongation* Parallel stop* Saw blade 315mm* Saw blade protective hood inc. hose

NEW RANGE

CBaker

Typewritten Text

Page 19

CIRCULAR SAW Model TKS 315E 1ph | 3ph

Excel Circular Saws


Model TKS 315E 1ph 0590-3315

Model TKS 315E 3ph 0590-3316

‘ALWAYS EXCEL’

Specification TKS 315E 1ph/3ph

Maximum saw blade dia. 315mmMaximum cutting height 90°/45° 83/60mmSaw blade inclination 0-45°Table dimensions (LxW) 800x550mmTable height 800mmSpeed 2800 min-¹Motor power 50Hz 230V - 2kW /400V 2.8 Kw Suction nozzle dia. Top 38mm/ 100mm bottomMachine weight 56 Kg

Included as standard:* Chassis* Sliding carriage* Table elongation* Parallel stop* Saw blade 315mm* Saw blade protection hook inc. hose

Largely dimensioned machine table made of steel serially galvanised against corrosion. Stand table extension can also be mounted as a table width extension. Ball bearing mounted sliding carriage with mitre stop and additional rip fence secure a safe work piece guidance and precise cuts. Saw blade turning from 0° - 45° precise, exact to degree and easily adjustable over star knobs. Large central suck-off connection 100mm. Saw blade height adjustment is also adjusted by means of hand wheel from the op-erator's front. Inc. saw blade hook with integrated suck off connection. Easy movable due to integrated chassis and fold-away transport handles.

BUY WITH CONFID

ENC

E

NEW RANGE

CBaker

Typewritten Text

Page 20

Scroll Saw

Model DKS 502 VARIO 1ph


‘ALWAYS EXCEL’

Excel Scroll Saws



ALWAYS EXCEL

BUY WITH CONFID

ENC

E

Model DKS 502 VARIO 0590-0504

Specification DKS 502 Vario

Maximum cutting height 50mmSaw blade length 133mmNumber of strokes 700-1400/min-¹Table size 380x250mmMotor power 120W/230VSuction nozzle 38mmWeight 12 Kg

To work soft woods (50mm), plastic materials (30mm) or similar. The large throat also allows working of large work pieces. Work table tilts from -45° to 0°. The robust cast construction guarantees smooth and vibration free running. The integrated adjustable dust blowing device including the flexible hose, removes the dust particals from the cutting line when sawing. The transparent saw blade protection provides for optimum safety and is height adjustable.With infinitely variable number of strokes.

NEW RANGE

CBaker

Typewritten Text

Page 21

Scroll Saw

Model DKS 530 VARIO 1ph


‘ALWAYS EXCEL’

Excel Scroll Saws

Specification DKS 530 Vario



ALWAYS EXCEL

Model DKS 530 VARIO 0590-0505

BUY WITH CONFID

ENC

E

Motor power 230V 225 wattsSaw blade length 127mmNumber of strokes 500-1550 min-¹Max Cutting Height: @ 90° 53mm@ 45° (on the left) 26mm@ 45° (on the right) 19mmMachine dimensions (LxWxH) 74x31x44cmMachine weight 20.5 Kg

Maximum cutting capacity 53mm.Variable hoisting speed from 500 to 1550 min-¹Working table slewable from - 45° to 45°Rack and working table made of grey cast iron.Including storage boxes for saw bladestransparent saw blade guard slewable to the top and holding down clamp for work pieces.Blade acceptance for pinned fretsaw blades and fretsaw blades. Flexible blower nozzle

NEW RANGE

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 22

Chop Saw

Model KGZ 305E


Excel Chop Saws

Specification KGZ 305E

Model KGZ 305E 0570-2305

‘ALWAYS EXCEL’Motor power 230V 2.0kWSpeed of Saw blade 4500 min-¹Saw blade dia. 305mmCutting Capacities at inclination/mitre (height x width):at 0°/0° 100x340mmat 45°/0° on the left 40x340mmat 45°/0° on the right 40x340mmat 0°/45° on the left 100x240mmat 45°/45° on the left 40x240mmat 45°/45° on the right 40x240mmDimensions LxWxH) max. 83 x 57 x 79cmMachine weight 23 Kg


* Vice* Clamping device* Dust collection bag* Saw blade

MACHINE FEATURES

Base plate and rotary disc made of aluminium die cast at the same time compact and robust.Laser protection on the work piece for exact control of the cutting position. Infinitely adjustable double mitre and double inclination. Adjustable alignment rails and laterally extendable support rests for long work pieces. Double adjustable chopping depth limitation with simple switch-over stop. With traction function for extended cutting range. Includes vice and clamping device for safe work piece locking. Suction nozzle for dust collection bag or the connection of an external suction unit

NEW RANGE

CBaker

Typewritten Text

Page 23

Chop Saw

Model KGZ 3050 1ph


Excel Chop Saws

‘ALWAYS EXCEL’

Model KGZ 3050 0570-1305

Base plate and rotary disc made of aluminium die cast. Grid settings in rotary table additionally at 60° (only on the right hand) with 31.6° grid setting specially to cut trim strips.Double inclination and double mitre. Laser projection on the work piece for exact control of the cutting position. Elongation of the work piece support on both sides with flap stops for repetitive jobs. Includes chip collection bag. Easy & rapid replacement of saw blade. Fine adjustment angular setting. Adjustable and high work piece stops made of aluminium. Clamping device for safe working piece fixture. With chop depth limitation. Also cuts contoured rims.

Motor power (230V) 1.8kWSpeed of Saw blade 4200 min-¹Saw blade dia. 305mmTable size dia. 342mmGrid settings on 0°/15°/22.5°/31.6° rotary disc: 45 (r and l), 60° (r)Cutting capacities at inclination/mitre (Height x width) :at 0°/0° 102x310mmat 45°/0° on the left 60x310mmat 45°/0° on the right 45x310mmat 0°/45° on the left 102x222mmat 0°/60° on the right 102x158mmat 45°/45° on the left 60x222mmat 45°/60° on the right 45x158mmMachine dims (LxWxH) 127x116x76cmMachine weight 34 Kg

Specification KGZ 3050

BUY WITH CONFID

ENC

E

NEW RANGE

CBaker

Typewritten Text

Page 24

SAWING MILLING THICKNESSER Model UMK 6 1ph

SAWING MILLING THICKNESSER


Specification UMK 6 Circular Saw:Sliding carriage dims 120x740mmTravel of sliding carriage 500mmMaximum saw blade dia. 200mmSpeed of saw blade 4200min-¹Maximum cutting height 65mmWorking table 620x300mmPlaning:Working width 154mmPlaning table length 620mmMaximum chip removal 1.5mmSpeed cutter block 6000min-¹Number of plane irons 2

Thickness:Table length 320mmPassage width 154mmMin/max.passage height 9/92mmMaximum chip removal 1.0mmFeed speed 7m/minTable Top Milling:Spindle seat 12mmSeat for milling cutter 6/8mmSpindle height adjust. 0-42mmSpindle speed 9000min-¹General:Motor power 230V/50HzWeight – 49 KgSuction nozzle dia. – 58mm

Specification UMK 6

BUY WITH CONFID

ENC

E

‘ALWAYS EXCEL’

Included as standard:* 2 Knife cutter block* Planing knife set (2pc)* Saw blade, 200x30x2.6mm T20* Sling carriage for saw & spindle moulder

* Multi-functional fence for parallel cutting & jointing* Mitre fence* Mortiser with clamping arm* Bar pusher

Suction nozzle thickness 50mmSuction nozzle dia. saw blade protection 21mm

Slot Milling Equipment:Working table mm 260x125Clamping range of drill chuck 13mmSeat for slot drill mm 6/8/10 Slot height 95mmTransversal movement (drilling width) 60mmLongitudinal movement (drilling depth) 45mm

Model UMK 6 0590-5600 NEW RANGE

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 25

EDGE MILLING MACHINES Model KF 3 1ph

Excel Edge Milling Machines


BUY WITH CONFID

ENC

E

Specification KF3Always excellent ....Quality

Always excellent ....ValueAlways excellent ....Service

ALWAYS EXCEL

‘ALWAYS EXCEL’

Model KF 3 0541-0061

Edge thickness 0.5-3mmWork piece thickness 10-40mmFeed ManualPower 740W/230VSpeed 13,000-31,000 min-¹Suction nozzle dia. 45mmWeight 4.1Kg

MACHINE FEATURES

Double sided milling in two working steps without need to turn work piece. The edge band can be machined on both sides on the plane and profiled components. The support plate is coated with Teflon so that the surfaces are not scratch

NEW RANGE

CBaker

Typewritten Text

Page 26

EDGE MILLING MACHINES Model KF 6 1ph

Excel Edge Milling Machines


Specification KF6

Model KF 6 0541-0010

Edge thickness 0.5-3mmShaft tool dia. 6mmFeed ManualPower 450W/230VSpeed 30,000 min-¹Suction nozzle dia. 25mmWeight 2 Kg

MACHINE FEATURES

For precise machining of different materials such as wood, PVC or MelamineErgonomic handle for stable and convenient guiding of machine. Milling guard including integrated connection for suction unit can be turned 180°for maximum protection of the operator and a clean and low dust working. Replaceable milling headWith scale adjustable in steps of 0.05mmMilling guard adaptable to the contour of the work piece thus ensuring trouble free guiding of the milling cutter. Includes integrated stop for edge rounding

BUY WITH CONFID

ENC

E

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

Page 27

WET / DRY GRINDER

Model NTS 251Excel Grinding Machines


BUY WITH CONFID

ENC

E

Specification NTS 251 Always excellent ....Quality


ALWAYS EXCEL

Model NTS 251 0590-2251

Whetstone dims- Max. 250x50mm

Sharpening wheel dims - Max. 220x30mm

Speed 90min-¹

Motor power 50Hz/23V 200w

Machine dimensions (LxWxH) 34x28x46cm

Machine weight 16 Kg

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

CBaker

Typewritten Text

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 28

CBaker

Typewritten Text

BELT & DISC GRINDING MACHINE

Model BTS 150 1ph


Excel Belt & Disc Grinding Machines

Specification BTS 150

Belt Size 915 x 100 mm

Disc Size 150 mm

Table Size 150 x 230 mm

Speed 2’850 min

Input Power 50 HZ 400W / 230V

Suction Nozzle 58 mm

Machine Dimensions (LxWxH) 56x27x30cm

Machine Weight 17 Kg

BUY WITH CONFID

ENC

E

-1



ALWAYS EXCEL

MACHINE FEATURES

Twist free machine housing made of steel grey cast iron construction.Sanding belt unit infinitely slewable from 0° to 90° It can be used horizontally and vertically. Double controlled, slewable working table infinitely variable from 0-45°. Integrated suck off nozzle to be connected to an external suction unitIncludes sanding belt and wheel.

Model BTS 150 0590-4150

Excel Belt & Disc Grinding MachinesExcel Belt & Disc Grinding Machines

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 29

CBaker

Typewritten Text

BELT & DISC GRINDING MACHINE

Model BTS 250 1ph


Excel Belt & Disc Grinders


Belt Size 1220 x 150mmDisc Size 250 mmTable Size 360 x 200 mmSpeed 1’440 min Dims (LxWxH) 72 x 41 x 44cm Input Power 50 HZ 800W / 230VSuction Nozzle dia. 58 mmWeight 47 Kg



ALWAYS EXCEL

-1

‘ALWAYS EXCEL’Twist free machine housing made of steel grey cast iron construction.Sanding belt unit infinitely slewable from 0° to 90°. It can be used horizontally and vertically. Double controlled, slewable working table infinitely variable from 0-45° Integrated suck off nozzle to be connected to an external suction unit.Includes sanding belt and wheel

BUY WITH CONFID

ENC

E

Model BTS 250 0590-4250

NEW RANGE

Stand for BTS 250 0591-4250

CBaker

Typewritten Text

Page 30

SANDING BELT THICKNESSER

Model WSM 330


Excel Sanding Belt Thicknesser

Specification WSM 330

BUY WITH CONFID

ENC

E Excel Sanding Belt Thicknesser Excel Sanding Belt Thicknesser Excel Sanding Belt Thicknesser Excel Sanding Belt Thicknesser

‘ALWAYS EXCEL’

Model WSM 330 0538-2330

Stand for WSM 330 0538-2435

NEW RANGE

Work roller dia. 75mmSanding belt width (Max.) 330mmMaterial feed 0-6m/minSanding roller speed 1720 min-¹Work piece height ( min/max) 3-102mmPower connection 230VMotor power roller drive 0.7kWPower motor material supply 0.15kWSanding belt dimensions 76.2x2530mmMachine dimensions (LxWxH) 62x64x76cmMachine weight 89 KgSuction nozzle dia 100mmMinimum air speed for suction 20 m/s

Robust steel welding structure with stable cast table plateTo process massive wood. Easy safe operationRoller bearing sealed on all sides. Clearly arranged scale for sanding thickness. Fine adjustable sanding rollRapid release mechanism for sanding belt replacement with spring tension. Robust industrial conveyor beltChromed hand crank for height adjustment

CBaker

Typewritten Text

Page 31

CBaker

Typewritten Text

SANDING BELT THICKNESSER

Model WSM 430


Excel Sanding Belt

Specification WSM 430

‘ALWAYS EXCEL’

Model WSM 430 0538-2430

Stand for WSM 430 0538-2436

NEW RANGE

Work roller dia. 75mmSanding belt width (Max.) 430mmMaterial feed 0-7m/minSanding roller speed 1720 min-¹Work piece height ( min/max) 3-102mmPower connection 230VMotor power roller drive 1.1kWPower motor material supply 0.15kWSanding belt dimensions 76.2x2780mmMachine dimensions (LxWxH) 62x74x76cmMachine weight 95 KgSuction nozzle dia. 100mmMinimum air speed for suction 20 m/s

Robust steel welding structure with stable cast table plateTo process massive wood. Easy safe operation.Roller bearing sealed on all sides. Clearly arranged scale for sanding thickness. Fine adjustable sanding rollRapid release mechanism for sanding belt replacement with spring tension. Robust industrial conveyor beltChromed hand crank for height adjustment

BUY WITH CONFID

ENC

E

CBaker

Typewritten Text

Page 32

BRUSH/ROLLER SANDER

Model BWSM 480


Excel Brush/Roller Sander

Specification BWSM 480

BUY WITH CONFID

ENC

E


BU‘ALWAYS EXCEL’

Model BWSM 480 0538-0480

NEW RANGE

Maximum work piece width 960mmMinimum work piece length 140mmWork piece height (Min./max.) 0.8-100mmRoller speed 1750 min-¹Brush speed 200-1000 min-¹Sanding roller dia 127mmSanding roller width 480mmInfinitely variable feed 0.3-m/minMotor power 230V/50Hz/S1 1.1kWMachine weight with stand 157 KgMachine dims without stand 102x68x56cmMachine dimensions with stand 108x68x131cmSuction nozzle 120mm

Included as standard:• Suction Nozzle 120mm• G80 Sanding Belt• 127mm Aluminium Roller

Operating units for feed, rollers and speed are visible and operable from the inlet side. Infinitely adjustable feed speed from 0-3m/min. Height adjustment without clampingEquipped with self cooling and balanced sanding roller 127mm. Includes high performance roller bearing as standard. Suction nozzle 120mm for optimum suction directly above the sanding drum. Dust-proof ball bearings in sanding drum. Easy covering of roller without toolsDirect drive for optimum power transmission. Guiding of feed belt. Height adjustment by means of scaleParallelism of table to drum can be adjustedControllable drum speeds

CBaker

Typewritten Text

Page 33

DOUBLE ROLLER SANDER

Model BWSM 635



‘ALWAYS EXCEL’

Model BWSM 635 0538-0635

NEW RANGE

Maximum sanding width 635mmMinimum workpiece length 140mmMin./Max. workpiece height 0.8-150mmRoller speed 1500 min-¹Sanding roller dia. 127mmSanding roller width 635mmFeed 0-6m/minFeed motor 0.2kWMotor power 400V/50Hz 3.7kwMachine dimensions 146x88x145cmWeight 272 KgSuction nozzle 160mm

Specification BWSM 635

Included as standard:* Suction nozzle - 160mm* Sanding belt G80* Sanding belt G100

Operating units for feed, rollers and speed are operable and visible from front. Infinitely adjustable variable feed speed from 0-6m/min. Fine studded rubber feed conveyor. Self-locking height adjustment . Robust and high performance structure suitable for continuous operation. Rapid sanding belt replacement. Separately adjustable rear sanding roller. Steel sheet suction nozzle 160mm directly above sanding drums for optimum suction. Height adjustment by means of sanding unit. Pre-sanding and re-sanding is possible in one working cycle. Each drum supported by 2 x bearings with steel core (internal ventilation and balanced). Drive via Poli-V-Belts for optimum power transmission

BUY WITH CONFID

ENC

E

CBaker

Typewritten Text

Page 34

WIDE BELT SANDER

Model BBS 430C | BBS 630C



Specification BBS 430C Specification BBS 630C

Model BBS 430C 0534-3060 Model BBS 630C 0534-3065

NEW RANGE

Working width 430mmWork roller dia 120mmSanding belt width 450mmSanding belt length 1600mmSanding belt speed 18m/sWork piece height (min/max) 3/160mmFeed speed 4.5/9m/minMotor power 4kW/400VTransmission driving motor 0.43/0.3kWHeight adjustment motor 0.18kWCompressed air consumption 20 l/minOperating pressure 6 barsSuction pipe dia. 150mmSuction power 2500m³/hMachine dimensions 108x81x150cmMachine weight 680 Kg

BUY WITH CONFID

ENC

E

Working width 630mmWork roller dia. 120mmSanding belt width 650mmSanding belt length 1600mmSanding belt speed 18m/sWork piece height (min/max) 3/160mmFeed speed 4.5/9m/minMotor power 5kW/400VTransmission driving motor 0.43/0.3kWHeight adjustment motor 0.18kWCompressed air consumption 20 l/minOperating pressure 6 barsSuction pipe dia. 150mmSuction power 3000m³/hMachine dimensions 108x101x150cmMachine weight 770 Kg

Combined sanding unit including sanding shoe. Control panel at front. With ribbed steel roller. 120mm and hard sanding shoe with graphite coating on replacement inserts as series. Motorised height adjustment of the working table. Electronically controlled sanding belt oscillation. Automatic star/delta start-up of the motor. Mechanic dimensions of table position. Ampere meter to display power consumption of sanding unit.Two feed speeds. Electro-magnetic brake

CBaker

Typewritten Text

Page 35

BELT/DISC SANDING MACHINE

Model BTS 200 1ph


Excel Belt/Disc Sanding M/C


BUY WITH CONFID

ENC

E Excel Belt/Disc Sanding M/CExcel Belt/Disc Sanding M/C

BU

Excel Belt/Disc Sanding M/CExcel Belt/Disc Sanding M/C

‘ALWAYS EXCEL’

Model BTS 200 0590-2200

NEW RANGE

Sanding disc dia. 305mmSanding belt dimensions 152x1219mmBelt speed 12m/sec.Working table grey cast iron 315x155mmWorking table aluminium 400x225mmWorking table slewing - 15° - 0° - +45°Suction nozzle 2x63mmMotor power 50 Hz 1100W/230VMachine dimensions (LxWxH) 83x62x134cmMachine weight 53 Kg

Included as standard:* Mitre stop* Sanding belt & disc

Mitre stop for worktable adjustable from -30° to +30°Emergency STOP switch. Slewable belt sanding unit from 0°-90°. Quick replacement of sanding belts by means of quick clamping system. Easy belt running adjustment

CBaker

Typewritten Text

Page 36

DISC SANDER

Model TS 300 1ph


‘ALWAYS EXCEL’

Excel DISC SANDER

Specification TS 300

Sanding Disc dia. 305mmWorking Table aluminium 400x225mmWorking Table slewing -15° - 0° - +45°Suction Nozzle dia. 1x63mmMotor Power 50Hz 750 Watt/230VMachine Dimensions (LxWxH) 55x42x45xcmMachine Weight 32 Kg



ALWAYS EXCEL

BUY WITH CONFID

ENC

E

Included as standard:* Mitre Stop* 1 x Sanding Disc K80

Model TS 300 0590-0300

NEW RANGE

MACHINE FEATURES

Mitre stop for worktable adjustable from -30° to +30°Emergency STOP switch

CBaker

Typewritten Text

Page 37

SANDING MACHINE

Model LBSM 2505


‘ALWAYS EXCEL’

Excel Belt Edge Sanding Machines

Specification LBSM 2505

BUY WITH CONFID

ENC

E

Model LBSM 2505 0534-2505Working table dimensions 2450x800mmWorking table height adjustment 575mmWorking table cross stroke 690mmSanding shoe dimensions 150x270mmBelt speed 17m/secMotor power 400V/50Hz/S6-40% 3.0kWDia. of drive roller 225mmSanding belt dimensions 6400x150mmDimensions (LxWxH) 334x112x153cmMachine weight 520 KgSuction nozzle dia 2x160mm

Sanding unit slewable.Machine can also be used as an edge sanding machine. Weighed heavy belt rollers with a size of 225mm provide for low vibration drive. Easy adjustment of the sanding belt. High belt speed of 18m/s. Right/left handed rotation. Top sanding shoe with graphite coating. Sanding shoe mounted on quadruple bearing. With mobile sanding shoe for inclined surfaces. Smoothly running sanding table also at high load due to heavy work pieces

NEW RANGE

CBaker

Typewritten Text

Page 38

SANDING MACHINE

Model LBSM 2505ESE



BUY WITH CONFID

ENC

E

Excel Belt Edge Sanding Machines Excel Belt Edge Sanding Machines

‘ALWAYS EXCEL’

Model LBSM 2505ESE 0534-2552Working table dimensions 2530x810mmWorking table height adjustment 550mmWorking table cross stroke 690mmSanding shoe dimensions 150x270mmBelt speed 17m/secMotor power 400V/50Hz/S6-40% 3.0kWMotor table height adjustment 0.37kWDia. of drive roller 225mmSanding belt dimensions 7000x150mmDimensions (LxWxH) 375x125x173cmMachine weight 620 KgSuction nozzle dia. 2x160mm

NEW RANGE

Sanding unit slewable. Machine can also be used as an edge sanding machine.Weighed heavy belt rollers with a size of 225mm provide for low vibration drive. Easy adjustment of the sanding belt. High belt speed of 18m/s. Right/left handed rotation. Top sanding shoe with graphite coating. Sanding shoe mounted on quadruple bearing. With mobile sanding shoe for inclined surfaces. Smoothly running sanding table also at high load due to heavy work pieces.

Specification LBSM 2505ESE

CBaker

Typewritten Text

Page 39

SANDING MACHINE

Model LBSM 3005ESE



Specification LBSM 3005ESE

BUY WITH CONFID

ENC

E

Excel Belt Edge Sanding Machines Excel Belt Edge Sanding Machines

‘ALWAYS EXCEL’

Model LBSM 3005ESE 0534-3052Working table dimensions 3025x810mmWorking table height adjustment 550mmWorking table cross stroke 690mmSanding shoe dimensions 150x270mmBelt speed 17m/secMotor power 400V/50Hz/S6-40% 3.0kWMotor table height adjustment 0.37kWDia. of drive roller 225mmSanding belt dimensions 8000x150mmDimensions (LxWxH) 425x125x173cmMachine weight 325 KgSuction nozzle dia. 2x160mm

Sanding unit slewable. Machine can also be used as an edge sanding machine. Weighed heavy belt rollers with a size of 225mm provide for low vibration drive.Easy adjustment of the sanding belt. High belt speed of 18m/s. Right/left handed rotation Top sanding shoe with graphite coating. Sanding shoe mounted on quadruple bearing. With mobile sanding shoe for inclined surfacesSmoothly running sanding table also at high load due to heavy work pieces.

NEW RANGE

CBaker

Typewritten Text

Page 40

EDGE SANDING MACHINE

Model KSO 790 3ph


Excel Edge Sanding Machines

Specification KSO 790



ALWAYS EXCEL

BUY WITH CONFID

ENC

E

Sanding belt dimensions 2010x152mmTable height 810mmLongitudinal table dimensions 790x221mmCross table dimensions 514x221mmSanding belt speed 13m/secSanding length max. 790mmSanding rollers dia. unit 70mmSuction nozzle 100mmMotor power - 50 Hz 1.5kW/400VMachine dimensions (LxWxH) 127x54x102cmMachine weight 86 Kg

NEW RANGE

Excel Edge Sanding Machines Excel Edge Sanding Machines

BU


‘ALWAYS EXCEL’

MACHINE FEATURES

Longitudinal and transversal table for mitres from 0-45° infinitely slewable.Horizontal and vertical sanding unit - vertical sanding possible. Quick action clamping for sanding belt. Includes transversal table for profile sanding, slewable up to 45°.Longitudinal table is height adjustable by 110mm for optimum useage of sanding belt width. Includes infinitely variable mitre stopGraphite coating on the sanding sole for higher sliding properties of the sanding belt & longer durability.

Model KSO 790 0590-0790

CBaker

Typewritten Text

Page 41


Model KS0 850


‘ALWAYS EXCEL’



Dimensions Sanding belt 2515x152mmSanding belt speed 16m/secWork piece stop 700x60mmSize of grey cast table 840x300mmTable height adjustment 80mmMotor power 50Hz 2.2kW/400vSuction nozzle dia. 100mmDimensions 143x60x125cmWeight 148 Kg

MACHINE FEATURES

With oscillating sanding belt for good sanding performance, a neat surface finish and a high durability of the sanding belt. Adjustable height sanding table.45° to +45° Infinitely variable mitre and work piece stop as standard. Infinitely variable sanding unit with angular adjustment.(0-90°) for vertical and horizontal sanding.Table height adjustment by means of hand wheel.Robust working table made of grey cast iron with T-slots, stable sand of the machine whole working.Including height adjustable additional table for profile sanding. Rapid and easy sanding belt replacement via quick clamping system. Spring mounted clamping unit for uniform belt tension. Sanding sole with graphite coating as standard. With lockable deposit options in the serial sub-structure. With lockable emergency stop switch.

BUY WITH CONFID

ENC

E Model KSO 850 0590-0850


* Mitre stop* Work piece stop

NEW RANGE

CBaker

Typewritten Text

Page 42


Model KSO 1500 3ph


‘ALWAYS EXCEL’



BUY WITH CONFID

ENC

E

Model KSO 1500 0536-8150

NEW RANGE

Sanding belt dimensions 2260x150mmSanding surface 770x150mmSanding belt speed 16m/sec.Size of grey cast table 680x310mmAdditional table dimensions 260x260mmMotor power 400V/50Hz: 1500kWMachine weight 162 KgMachine dimensions 135x58x121cmSuction nozzle dia 2x100mm

Infinitely variable sanding unit with angular adjustment(0-90°) for vertical and horizontal sanding.Oscillating sanding abrasive belt for better sanding results and a longer durability of the belt.Rapid and easy sanding belt replacement via quick clamping system. Sanding sole standard with graphite coating for higher life time of beltHeight adjustable robust worktable made of grey cast with T-Slot supported by spring mounting.Smoothly running adjustment of the table height by means of gas pressure springs.Including lateral abrasive sleeve unit to sand roundings and radii. Including infinitely variable mitre stop

CBaker

Typewritten Text

Page 43


Model KSO 150M 3ph



Specification KSO 150M

Excel Edge Sanding Machines Excel Edge Sanding Machines Excel Edge Sanding Machines Excel Edge Sanding Machines

‘ALWAYS EXCEL’

Model KSO 150M 0536-2600

BUY WITH CONFID

ENC

E

NEW RANGE

Working tables LxW 750x300mmWorktable height adjustment 200mmSanding surface 850x200mmBelt speed 20m/sec.Oscillation stroke 20mmMotor - 400V/50Hz 3.0kW (4.0HP)Oscillating motor 0.25kW (0.34HP)Belt length x width 2600x150mmMachine dimensions (LxWxH) 160x85x135cmMachine weight 180 KgSuction nozzle dia 120/80mm

Can be slewed 45° by means of a lever. Base made of welded steel guarantees high torsional stiffness and vibration free working. Oscillating abrasive belt with separate drive motor for better sanding results. Oscillation alternatively connectible. Sanding sole with graphite coatingHeight adjustable sanding table to use the whole abrasive belt width. Height adjustable additional table with suction to sand radii. The spring mounted belt tension automatically equals differences in belt length. With double suctionExtensible roller table broadening. With rubberised abrasive roller

CBaker

Typewritten Text

Page 44


Model KSO 150F 3ph



Model KSO 150F 0536-3000

BUY WITH CONFID

ENC

E

NEW RANGE

Specification KSO 150FWorking tables LxW 960x350mmWorktable height adjustment 230mmSanding surface 1050x150mmBelt speed 20m/sec.Oscillation stroke 20mmMotor - 400V/50Hz 3.0kW (4.0HP)Oscillating motor 0.25kW (0.34HP)Belt length x width 3000x150mmMachine dimensions (LxWxH) 190x90x135cmMachine weight 320 KgSuction nozzle dia 120/80mm

Can be slewed 45° by means of a lever. Base made of welded steel guarantees high torsional stiffness and vibration free working. Oscillating abrasive belt with separate drive motor for better sanding results. Oscillation alternatively connectibleSanding sole with graphite coating. Height adjustable sanding table to use the whole abrasive belt width. Height adjustable additional table with suction to sand radii. The spring mounted belt tension automatically equals differences in belt lengthWith double suction. Extensible roller table broadeningWith rubberised abrasive roller. Veneer edge sanding unit with contact shoe with fine adjustment, relief roller and stop ruler. Grooved inlet ruler for veneer protrusions


‘ALWAYS EXCEL’

CBaker

Typewritten Text

Page 45


Model KSO 150FD 3ph


Excel Edge Sanding Machines Excel Edge Sanding Machines Excel Edge Sanding Machines

‘ALWAYS EXCEL’

BUY WITH CONFID

ENC

E

Model KSO 150FD 0536-3002

NEW RANGE

Specification KSO 150FD

Working tables LxW 960x350mmWorktable height adjustment 230mmSanding surface 1050x150mmBelt speed 20m/sec.Oscillation stroke 20mmMotor - 400V/50Hz 3.0kW (4.0HP)Oscillating motor 0.25kW (0.34HP)Belt length x width 3100x150mmMachine dimensions (LxWxH) 190x90x135cmMachine weight 320 KgSuction nozzle dia. 120/80mm

Can be slewed 45° by means of a lever. Base made of welded steel guarantees high torsional stiffness and vibration free working. Oscillating abrasive belt with separate drive motor for better sanding results. Oscillation alternatively connectibleSanding sole with graphite coating. Height adjustable sanding table to use the whole abrasive belt width. Height adjustable additional table with suction to sand radii. The spring mounted belt tension automatically equals differences in belt length. With double suction. Extensible roller table broadening. With rubberised abrasive roller. Veneer edge sanding unit with contact shoe with fine adjustment, relief roller and stop ruler. Grooved inlet ruler for veneer protrusions

CBaker

Typewritten Text

Page 46


Model KSO 1500F



Specification KSO 1500F

‘ALWAYS EXCEL’NEW RANGE

Working tables LxW 750x300mmSanding surface 850x200mmBelt speed 20m/sMotor 400V/50Hz 3.0kWOscillating motor 0.25kWBelt length 2600mmBelt width 150mmMachine weight 180 KgSuction nozzle dia. 120/80mm

Machine blade made of welded steel and guarantees high torsional stiffness and vibration-free working. Sanding unit can be slewed 45° by means of a lever. Double suction. Oscillating abrasive belt with separate drive motor for better sanding results. Oscillation alternatively connectibleSanding sole with graphite coating . Height adjustable sanding table to use whole abrasive belt width. Height adjustable additional table with suction to sand radii

BUY WITH CONFID

ENC

E

Model KSO 1500F 0590-1500

CBaker

Typewritten Text

Page 47


Model KSO 200F 3ph



BUY WITH CONFID

ENC

E


‘ALWAYS EXCEL’

Model KSO 200F 0536-3001

NEW RANGE

Specification KSO 200F

Working tables LxW 960x350mmWorktable height adjustment 230mmSanding surface 1050x200mmBelt speed 20m/sec.Oscillation stroke 20mmMotor - 400V/50Hz 3.0kW (4.0HP)Oscillating motor 0.25kW (0.34HP)Belt length x width 3000x200mmMachine dimensions (LxWxH) 190x90x135cmMachine weight 320 KgSuction nozzle dia. 120/80mm

Can be slewed 45° by means of a lever. Base made of welded steel guarantees high torsional stiffness and vibration free working. Oscillating abrasive belt with separate drive motor for better sanding results. Oscillation alternatively connectibleSanding sole with graphite coating. Height adjustable sanding table to use the whole abrasive belt width. Height adjustable additional table with suction to sand radii. The spring mounted belt tension automatically equals differences in belt lengthWith double suction. Extensible roller table broadeningWith rubberised abrasive roller. Veneer edge sanding unit with contact shoe with fine adjustment, relief roller and stop rulerGrooved inlet ruler for veneer protrusions

CBaker

Typewritten Text

Page 48

CYLINDRICAL SANDING MACHINE

Model ZSM 405 1ph


‘ALWAYS EXCEL’

Excel Cylindrical Sanding Machines

Specification ZSM 405

BUY WITH CONFID

ENC

E

Model ZSM 405 0590-1405

Sanding length x max.width 60x405mmWorkpiece thickness (Max.) 130mmSanding roller dia. 132mmWidth sanding roller 410mmInfinitely variable feed 0.5-3.0m/minSpeed 1440 min-¹Suction nozzle dia. 100mmMotor 1.5kW/230VMachine dimensions (LxWxH) 103x95x130cmMachine weight 80 Kg

MACHINE FEATURES

Infinitely variable feed speed from 0-3m/min for optimum sanding results. Sanding unit is rapidly and exactly adapted to the workpiece by means of height adjustment crank & scale. Includes high performance drive motor for best sanding results even in continuous use. To be used with commercial abrasive cloths


* Suction unit* Front & rear table elongation

NEW RANGE

CBaker

Typewritten Text

Page 49

MOBILE EDGE BANDING M/C

Model KAG 3 1ph


Excel Mobile Edge Banding M/cExcel Mobile Edge Banding M/cExcel Mobile Edge Banding M/c

‘ALWAYS EXCEL’

Specification KAG 3 Always excellent ....QualityAlways excellent ....Value


ALWAYS EXCEL

Model KAG 3 0540-0003

Edge thickness 0.4-3.0mmEdge height 16.0-65.0mmFeed speed 1-6m/minPerformance 1065WConnection 230VGlue tank capacity 400 mlOperating temperature 120°C-200°C±1 °CWeight 8.5 Kg

MACHINE FEATURES

With infinitely variable control of temperature and feed speedWith digital temperature control and infinitely variable control of the feed speed. To be used for mouldings and straight workpieces. Easy and rapid preparation. Minimum inner radius of the workpiece amounts to 25mm. For edge joints is it possible to pre-glue the edges. Includes hot melt tank. Short warm up period - very good heat insulation

NEW RANGE

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 50

EDGE BANDING MACHINE

Model KAM 60 3ph


Excel Edge Banding Machines

BUY WITH CONFID

ENC

E

Specification KAM 60

Model KAM 60 0540-0060

Plate thickness 12-60mmEdge thickness belts veneer 0.5-3mm/40mmEdge thickness belts ABS, PVC 0.5-2mm/65mmFeed speed 6.5m/minPerformance 3.0kWVoltage 400V/50HzOperating pressure 6 barsMachine dimensions (LxWxH) 230x70x130cmHeight inc. magazine 1800mmMachine weight 580 Kg

MACHINE FEATURES

Durable steel construction with high rigidity for continuous accuracy. Operation via operating panel at the front of the machine. Very short setting up times. Easy setting of the edge thickness as well as of the workpiece thickness by means of numeric displays Dia. jointing cutter. Large support surface by extractable workpiece support. Precise feed of the workpiece via feed conveyor at the bottom of high traction and avoiding scratches on the workpiece surface.Combined milling unit with HM milling cutters and chromed sensor rollers foroptimum milling results when trimming and milling radii. With space saving, vertical edge pull-in with capacity for 2 x rollers which can be quickly replaced if required.

Excel Edge Banding Machines Excel Edge Banding Machines

‘ALWAYS EXCEL’

NEW RANGE

CBaker

Typewritten Text

Page 51

SLOT MORTISING MACHINE

Model LLB 16H 3ph


Excel Slotting Mortising Machines

BUY WITH CONFID

ENC

E

‘ALWAYS EXCEL’

Model LLB 16H 0532-6617

Specification LLB 16H Working table dimensions 500x200mmDrilling width 200mmDrilling depth 150mmDrilling height adjustment 150mmWescott drill chuck 0-16mmSpeed 3000min-¹Motor power 400V/50Hz/S6-40% 1.1kW (1.5HP)Machine dimensions (LxWxH) 56x74x132cmMachine weight 120 Kg


* Dowel equipment* Eccentric spanner

NEW RANGE

CBaker

Typewritten Text

Page 52

SPINDLE MOULDER

Model TF 200SE 3ph


Excel Spindle Moulder Machines

BUY WITH CONFID

ENC

E ‘ALWAYS EXCEL’

Specification TF 200SE

Model TF 200SE 0590-2000

Table size 1000x360mmTable opening 200mmWorking height 00mmSpindle dia. 30mmSpindle stroke 100mmSpindle tilt angle -5° to 45°Maximum tool dia 180mmSpindle speed 1800/3000/6000/9000 min-¹Suction nozzle dia. 100mmMotor power 50Hz 2.8kW/400VMotor speed 2800 min-¹Extraction connection dia. 100mmMachine weight 198 Kg


* Mitre fence* Hold-down* Milling protective hood

MACHINE FEATURES

Smooth sliding table for precise work piece guidance.Spindle moulder fence with finely adjustable aluminium stops. Fast & easy change of rotation speed using multi-V belt. Large work surface due to solid and torsion-resistant cast iron table.Large sized milling unit consisting of grey cast iron is pivotable from +5 to -45°. Selector switch for clockwise or counter-clockwise rotation of the milling spindle. To the rear pivotable milling spindle for optimal use of a feeding unit of maximum safety and clean cut. Hold-down for precise work piece guidance

NEW RANGE

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 53

AIR FILTER SYSTEM

Model LFS 3


Excel Air Filter System

Specification LFS 3 Always excellent ....QualityAlways excellent ....Value


ALWAYS EXCEL

BUY WITH CONFID

ENC

E CON

‘ALWAYS EXCEL’

Model LFS 3 0512-7003

Maximum volume flow:Stage - “Low” 846m³/hStage - “Average” 1184m³/hStage - “High” 2030m³/hMotor power 230V/50Hz p 0.2PS/150 wattsMachine weigh 23 KgMachine dimensions (LxWxH 76x61x30cmMachine weight 23 Kg

Clearly arranged operating panel inc. LED displayElectro-static filter as standard. remote control with time registration for automatic switch OFF . Automatic self- detection of filter status system when it is necessary to replace filter. Filter captures particles larger than 1 µm. Can be adjusted in 3 stages depending on the use . Very rapid cleaning of the air

NEW RANGE

CBaker

Typewritten Text

Page 54

AIR SUCTION WITH CHASIS

Model ASA 1051


Excel Air Suction Machines

Specification ASA 1051 Always excellent ....Quality


ALWAYS EXCEL

Model ASA 1051 0512-1051

NEW RANGE

Air performance freely sucked off 844m³/hFilter surface about 1.3m²Filter category G1Motor power 50Hz 0.75kWDimensions (LxWxH) 75x38x185cmWeight 36 KgVolume of chip bag 100 lSuction nozzle dia. on device 100mmSuction nozzle dia. on standard distributor 100mm

BUY WITH CONFID

ENC

E

For milling, planing and drilling chips (no dust)High suction capacity. Easily displaceable with steering rollers. Made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material. Fan wheel made of metal, of blade shape for enhanced suction performance. Considerable reduced dust content due to double woven fine filter bag of category G1. Quick action closure for filter and chip bag

‘ALWAYS EXCEL’

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 55

CBaker

Typewritten Text


Model ASA 2401 | ASA 2403


Excel Air Suction with Chasis

Specification ASA 2401

‘ALWAYS EXCEL’ASA 2401


Model ASA 2401 0512-2401 Model ASA 2403 0512-2403

BUY WITH CONFID

ENC

E

NEW RANGE

Air performance freely sucked off 2789m³/hFilter surface about 1.8m²Filter category G1Motor power 50Hz 1.1kWDims (LxWxH) 90x48x210cmWeight 43.5 KgVolume of chip bag 160 lSuction nozzle dia. on device 200mmSuction nozzle dia. on standard distributor 120mm 100mm

Air performance freely sucked off 2789m³/hFilter surface about 1.8m²Filter category G1Motor power 50Hz 1.1kWDims (LxWxH) 90x48x210cmWeight 43.5 KgVolume of chip bag 160 lSuction nozzle dia. on device 200mmSuction nozzle dia. on standard distributor 120mm 100mm

For milling, planing and drilling chips (no dust). High suction capacityEasily displaceable with steering rollersMade of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material. Fan wheel made of metal, of blade shape for enhanced suction performanceConsiderable reduced dust content due to double woven fine filter bag of category G1. Quick action closure for filter and chip bag. The suction can be built in turned by 180° by what the suction direction is enabledfrom the top or from the bottom

CBaker

Typewritten Text

Page 56

CBaker

Typewritten Text


Model ASA 3303




‘ALWAYS EXCEL’



ALWAYS EXCEL

Model ASA 3303 0512-3303

NEW RANGE

Air performance freely sucked off 3260m³/hFilter surface about 3.6m²Filter category G1Motor power 50Hz 1.5kWDims (LxWxH) 144x48x220cmWeight 57.5 KgVolume of chip bag 2 x 160 lSuction nozzle dia. on device 200mmSuction nozzle dia. on standard distributor 2x120mm 1x100mm

For milling, planing and drilling chips (no dust). High suction capacity. Easily displaceable with steering rollers. Made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material. Fan wheel made of metal, of blade shape for enhanced suction performance. Considerable reduced dust content due to double woven fine filter bag of category G1. Quick action closure for filter and chip bagThe suction can be built in turned by 180° by what the suction direction is enabled from the top or from the bottom.

CBaker

Typewritten Text

CBaker

Typewritten Text

Page 57

CBaker

Typewritten Text

CBaker

Typewritten Text


Model ASA 4003




‘ALWAYS EXCEL’



ALWAYS EXCEL

Model ASA 4003 0512-4003

NEW RANGE

Air performance freely sucked off 3671m³/hFilter surface about 4.6m²Filter category G1Motor power 50Hz 2.2kWDimensions (LxWxH) 168x58x280cmWeight 79.5 KgVolume of chip bag 2 x 270 lSuction nozzle dia. on device 200mmSuction nozzle dia. on standard distributor 3x120mm 1x100mm

For milling, planing and drilling chips (no dust)High suction capacity. Easily displaceable with steering rollers. Made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material.Fan wheel made of metal, of blade shape for enhanced suction performance. Considerable reduced dust content due to double woven fine filter bag of category G1. Quick action closure for filter and chip bag. The suction can be built in turned by 180° by what the suction direction is enabled from the top or from the bottom.

CBaker

Typewritten Text

Page 58


Model ASA 5403



Specification ASA 5403Always excellent ....Quality


ALWAYS EXCEL



ITH CONFIDEN

CE

Model ASA 5403 0512-5403

NEW RANGE

Air performance freely sucked off 5355m³/hFilter surface about 12.9m²Filter category G1Motor power 50Hz 3.7kWDims (LxWxH) 190x67x280cmWeight 111 KgVolume of chip bag 2 x 450 lSuction nozzle dia. on device 250mmSuction nozzle dia. on standard distributor 3x120mm 1x100mm

For milling, planing and drilling chips (no dust)High suction capacity. Easily displaceable with steering rollers. Made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material. Fan wheel made of metal, of blade shape for enhanced suction performance. Considerable reduced dust content due to double woven fine filter bag of category G1. Quick action closure for filter and chip bagThe suction can be built in turned by 180° by what the suction direction is enabled from the top or from the bottom

CBaker

Typewritten Text

Page 59

SUCTION FOR CHIPS

Model SAA 901 1ph


Excel Suction for Chips

Specification SAA 901Always excellent ....Quality


ALWAYS EXCEL


‘ALWAYS EXCEL’

Model SAA 901 0592-3901

NEW RANGE

Air performance 1150m³/hNozzle inlet dia. 100mmNozzle outlet dia x100mmPower connection 230V/1-50HzMotor power 550 wattsDimensions (LxWxH) 87x50x149cmWeight 25 Kg

For milling, planing and drilling chips (not suitable for dust).Fan wheel and housing made of plastic material of blade configuration for higher suction capacityStable structure made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material construction. High suction performance. Easy movable with steering rollers

SUCTION FOR CHIPS BUY W

ITH CONFIDEN

CE

CBaker

Typewritten Text

Page 60

SUCTION FOR CHIPS

Model SAA 2003 3ph





ALWAYS EXCEL

BUY WITH CONFID

ENC

E Excel Suction for Chips

FICC

EEEE

FIDEN

C‘ALWAYS EXCEL’

Model SAA 2003 0592-2203

NEW RANGE

Air performance 2553³/hNozzle inlet dia. 125mmNozzle outlet dia 2x100mmPower connection 400V/3-50HzMotor power 1500 wattsDimensions (LxWxH) 100x75x200cmWeight 47 Kg

For milling, planing and drilling chips (not suitable for dust). Fan wheel and housing made of plastic material of blade configuration for higher suction capacity. Stable structure made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material constructionHigh suction performance . Easy movable with steering rollers

CBaker

Typewritten Text

Page 61

SUCTION FOR CHIPS

Model SAA 3003





ALWAYS EXCEL


‘ALWAYS EXCEL’

Model SAA 3003 0592-2303

BUY WITH CONFID

ENC

E NEW RANGE

Air performance 3910m³/hNozzle inlet dia. 150mmNozzle outlet dia. 3x100mmPower connection 400V/3-50HzMotor power 2200 wattsDimensions (LxWxH) 145x80x200cmWeight 59 Kg

For milling, planing and drilling chips (not suitable for dust)Fan wheel and housing made of plastic material of bladeconfiguration for higher suction capacityStable structure made of massive steel sheet, no breakable plastic material. Low static loading compared to any plastic material construction. High suction performance Easy movable with steering rollers.

CBaker

Typewritten Text

Page 62

Woodworking Accessories

4 Jaw Chucks Copying Attachments


Excel Woodworking Accessories/Tools


ITH CONFIDEN

CE

NEW RANGE

Specification 0593-1021 4 Jaw Chuck Kit 100mm Cap.0593-1023 4 Jaw Chuck Kit 100mm Cap.0593-1020 4 Jaw Chuck0593-1056 3 Pc Carrier Kit0593-1011 8 Pc Turning Tool Set

Specification

0593-1101 Copying Attachment for DB 900 0593-1102 Copying Attachment for DB 1100

CBaker

Typewritten Text

Page 63

CBaker

Typewritten Text

CBaker

Typewritten Text

New Woodworking Machines Digital Catalogue

Documents

Transcript of New Woodworking Machines Digital Catalogue