New TABS TI - Belden Tri-State TI.pdf · 2015. 8. 24. · TABS TI & TABS TI “Plus” Thermal...
2
TABS TI TABS TI Offers Owners & Architects An Exterior Veneer Finish System Insulated up to R-10 Insulation Board SYSTEM • Insulated • G-90 Galvanized • Thickness (.018) • Mortar Tie System • Full 20 Year Warranty TABS TI System Specifications on Reverse Side TABS TI - The industry’s first thermal insulated cavity drainage system for thin brick, tile or stone. 2900 Wilson Ave. SW Suite 301 Grandville, MI 49418 Phone 616.261.5656 Fax 616.261.5676 [email protected] www.tabswallsystems.com
Transcript of New TABS TI - Belden Tri-State TI.pdf · 2015. 8. 24. · TABS TI & TABS TI “Plus” Thermal...
TABS TITABS TIOffers Owners & Architects
An Exterior Veneer Finish System Insulated up to R-10
InsulationBoard
SYSTEM
• Insulated
• G-90 Galvanized
• Thickness (.018)
• Mortar Tie System
• Full 20 Year Warranty
TABS TI System Specifications
on Reverse Side
TABS TI - The industry’s first thermal insulated cavity drainage system for thin brick, tile or stone.
2900 Wilson Ave. SWSuite 301
Grandville, MI 49418Phone 616.261.5656
Fax 616.261.5676
The Original Tabs System was introduced in the mid 1980’s and was intended for both exterior & interior use. It was designed to match the thermal movement of the veneer and offered greater fastener pull through resistance. It also addressed the issue of proper spacing with its double tabbed design. In addition, the original Tabs Panel was embossed to make it one of the industry’s first moisture control systems.
TABS TI & TABS TI “Plus” Thermal Insulated Panel Systems. Structural Grade Steel, Mechanical Mortar Tie System, Moisture Control, (optional) Rain Screen, and 1/2” to 2” of Insulation to an R-10.
Product Description Tabs TI Tabs TI Plus
Intended Use Heavy Duty Heavy DutyQuality of Steel Panel Structural Grade Structural GradeNominal Panel Thickness .018 / 26 Gauge .018 / 26 GaugeCorrosion Protection G90 Hot Dipped G90 Hot DippedPanel Coating Thermal Set Thermal SetEmbossed Steel Panel Included IncludedThermal Insulated Protection R-2.5 to R-10 R-2.5 to R-10Patented Tabs II Tie System Included IncludedMortar Mix Type “S” Type “S”Mortar Additive Tabs II Tabs IIAdhesive Tabs II Tabs IIFasteners Non-Corrosive Non-CorrosiveWarranty Full Twenty Year Full Twenty Year
NON-CORROSIVETYPE FASTENER W/ A FLAT BACK DESIGN
MASTIC - APPLIED IN DABS OR VERTICAL STRIPS - DO NOT APPLY HORIZONTALLY
SUPPORT TAB
TABS PANEL
MORTAR / GROUT
1/2” to 11/4” THICK VENEER
3/8”
WITH RIGID INSULATION
MORTAR TIE
MORTAR TIE
MORTAR TIE
TYPICAL WALL DETAIL
Sheathing/CMU
Building Wrap
Insulation Board( 1/2” to 2” thickness)
Optional Rain Screen
SYSTEM
