New Star Plasma Brochure

A new era of totally versatile plasma cutting technology has arrived...

Worldwide Marine and Offshore Services

no more...Oxygen and Acetylene can become a

thing of the past on-board your vessels !www.star-international.co.uk


Oxygen and Acetylene cutting on board ship... becoming a thing of the past.Having Oxygen & Acetylene on-board vessels is not cheap these days:

• Deposit of the oxygen & acetylene cylinders • Daily rental of the cylinders• Refilling of the cylinders, varies from port to port,• Transport charges• Consumables, regulators / flashback arrestors / torches and cutting nozzles etc.

All of this is very expensive and can be a logistical nightmare, especially if any cylinders go missingleading to deposit losses. So consequently it will dramatically reduce costs and Increase productivityof the cutting and welding process.

Star International offers the following package:• The Revolutionary PowerMax30 Air are hugely cost effective, comes complete with an in-built compressor, no air lines to be carried around the ship, self-sufficient.• Brazing & Heating we offer, complete package torch, Propane & Mapp cartridges• MULTIPEARL 200-4 XL Inverter, complies with all your welding requirements

Contents Page

• Oxygen and Acetylene cutting on board 1

• PowerMax30 AIR with built-in air compressor 2

• The MULTIPEARL 200-4 XL is a single phase multi-process welder 3

• Heating Brazing Super Fire 2 with 400gram propane cartridge 4

• Contact and product details back cover

1

Health & Safety Welding Gases, can be sourced on the website:

www.star-international.co.uk

The Hypertherm Powermax30® AIRThe new Hypertherm Powermax30 is a revolutionary new Plasma cutter that comes complete with a built-in Air Compressor thus eliminating the need to look for airline to connect to the old type of Plasma machines,having a built-in compressor means you only need to plug in the Powermax30 which is a dual voltage machine, so you only need 120v or 240v with Auto-Voltagetechnology electrical supply to operate it. The major benefit is the completeportability ‘all over the ship’ to use on many jobs on all types of metals.

Benefits

No need carry heavy Oxygen & Acetylene bottles around a vessel or any place of work, the PLASMA30 AIR is extremely lightweight (13.5kg) and portable and can be carried over the shoulder with a thick comfortable strap. It ticks all the boxes from a Health & Safety perspective.

The recommended cut is between 8mm - 10mm. This will be more than enough we believe for most Marineapplications, the machine itself comes with a 3 year warranty and the torch has a 12 month warranty.

We at Star International are very excited by this machine and believe it will prove to be an invaluable piece of equipment for all vessels trading LOCALLY & WORLDWIDE.

Capacity Thickness Cut Speed

CuttingRecommended 8 mm 500 mm/min

10 mm 250 mm/minSeverance 16 mm 125 mm/min

Full 3 year power supply warranty and a 1 year torch warranty

2

Relative cut performance on mild steel

137% faster

Thickness

Cut s

peed

3 mm 6 mm

Powermax30 AIR

OxyfuelMoisture removal system

Compressor

Torch consumable parts

Consumable type Torch type Amperage Shield/Deflector Retaining cap Nozzle Swirl ring Electrode

Standard Hand 30 00650037 00650038 00650039 00650040 00650041

Electrodes and nozzles are sold in packs of five, as well as combination packs of 2 electrodes and 2 nozzles (part number 00650032)

Ordering information

Power supply System part number with 4,5 m AIR T30 torch

120 - 240 V 00650025

MULTIPEARL 200-4 XLSingle Phase Inverter 20 > 200A

The MULTIPEARL 200-4 XL is a single phase multi-process welder. It is capable of MIG/MAG, Gas & No Gas, MMA and TIG welding. It has an advanced user interface with the option of fully synergic or manual mode.

• MIG-MAG - The MULTIPEARL 200-2 is suitable for 1Kg and 5Kg wire reel thanks to its 2 rollers motor. - The MIG-MAG process can be used in manual or Synergic mode.• TIG - The device is capable of TIG welding: TIG Lift DC. - Post Gas and Downslope are adjustable directly on the torch thanks to the EURO connector.• MMA - Capable of welding any type of electrodes except Aluminium and Cellulosic up to Ø5mm, this machine is perfect for stick welding. - Hot Start and Arc Force are adjustable from 0 to 100%.

Delivered with : • 3mm, 150A MIG torch fitted for steel welding • 1.60m earth clamp • 2m electrode holder

MMA TIG ømm ømm

équipé d’origine / original equipement / Originalausstatung /

equipamiento de fabrica

EN60974-1(40°C)

50/60hz I2 I2 min▷max GAS NOGAS 200 300 Electronic

ControlIA

(60%)X%

(I2 max)cm/kg

Protected & compatiblePOWER GENERATOR

(+/- 15%)

110V 1~ 32A 10-130A 10-180A 20-150A 0.6-

1.00.9

0.6-

0.80.8

110A 150A22% 25x55x44

/ 207.5 kW9 kVA230V 1~ 16A 10-200A 10-200A 20-200A 120A 200A

20%

s

A

Synergi c

mm

SP OT DEL AY

Ar+CO22

Ø

I

s

As

I

• LCD screen designed to view and easily adjust welding settings.

FEATURES

MMA TIG Lift MIG-MAG

AI

• Power Factor Correction enables a saving of 30% of energy by

• Flexible Voltage enables the machine to run on a power supply from 85V to 265V.

• Combining these two technologies makes the device suitable suitable to use with extension leads up to 100m and on both 110V & 240V electrical supplies.

• Tested in the factory against overvoltage up to 400V. Also the device is designed to be able to be used on a generator.

FV

PFC

Costs incurred using oxygen and acetylene cylinders and equipment

The average vessel carries 6 x Oxygen & 3 x Acetylene cylinders, the break down cost is as follows;Refundable deposit per cylinder • Daily Rental charge per cylinder • Total refill approx. 6 x times a year

Spare parts that get replaced per year:• 1 x ac Regulator • 1 x oxygen regulator • 1 x acetylene back flow check valve • Cutting nozzles• Hose; oxygen & acetylene

For comparison quotes using Hypertherm and Multipearl equipment, please call us on +44 (0) 1244 504500 (10 lines)Email your enquiry on [email protected]

3in 1

3

Product Code: 00650042

Superfire 2 - Fully adjustable brazing torchIdeal for soldering and brazing use in plumbing, heating, refrigeration, air conditioning and other applications on board.

The Superfire 2 provides the highest standards in concentrating high temperatures for fast and effective soldering and brazing.

Rothenberger Super Fire 2 Blow Torch Benefits:

• Instant automatic ignition• Guaranteed anti-flare• Instant long-life piezo ignitor• Solid die cast torch body• Fine filtered jet• Professional performance• Fast, concentrated, high heat• Works in any position - even upside down

Temperatures up to 1,750°C with PropaneTemperatures up to 1,950°C with Mapp Gas

Can be supplied with Propane/Mapp gas 400 gm cartridgesTurbo torch heat guard also available.

4

Health & Safety Welding Gases, can be sourced on the website:


Rothenberger Superfire 2 Turbo Torch Product Code: 00350021

Propane Gas 400gram Product Code: 00650035

Mapp Gas 400gram cartridge Product Code: 00650034

Stainless Steel Heat DeflectorProduct Code: 00650036


Some of the popular products and services we offer

Star International

Pentre Industrial EstateChester RoadSandycroftFlintshire CH5 2DQUnited Kingdom

Tel: +44 (0) 1244 504500 (10 lines)Fax: +44 (0) 1244 504509

Email: [email protected]


• Medical Equipment (All types of Oxygen cylinders)• Fire Equipment (Service & Supply)• Lifejacket (Service & Supply) • Liferaft (Service, Exchange & Supply)• Multi Gas Detectors (Supply & Service)• Refrigeration Services / Spares • Rescue Boats and Lifeboats• Refrigerant Gases• Immersion Suit (Service & Supply)• Star EndoSan• Den-Sin U.H.P Washers

• Welding Gases• Plasma Cutters• Gas Welding Equipment • Arc Welding Equipment• Marine Chemicals• Water Treatment Test Kits• Fuel Oil Test Kits• Reagents• Biological Products• Disposable Span Gases• Ballast and Fresh Water Treatments

New Star Plasma Brochure

Documents

Transcript of New Star Plasma Brochure