New Products For 2014 New eddition… · • A choice of Waterguard® or Fabric waterproof membrane...

www.practicalcareproducts.com Tel: 01886 830119

Independent showering and living aids

New Products For 2014

www.practicalcareproducts.com

2


Level-Dec EasyFit for Vinyl or Tiled Floors

A revolutionary new design to make installation easier

The location of joists within timber floors no longer presents a problem as the new Level-Dec EasyFit includes a revolutionary drainage feature that allows the installer to rotate the drainage point through 360° thus avoiding the joist.

Key features include;

• No under boarding required• Lighter, yet stronger• Easy to cut and drill

Simply place the new Level-Dec EasyFit where it will be installed and if the drainage aperture interferes with a joist, just rotate the centre section until it is clear and fit the trap.

All Level-Decs are 22mm thick at the outer rim to be the same depth as most commonly used flooring materials.

Size Range & Codes:

LDE5 800 x 800 mm LDE4 900 x 900 mm LDE2 1000 x 1000 mm LDE12 1200 x 750 mm

LDE51 1200 x 900 mm LDE7 1200 x 1200 mm LDE1 1300 x 800 mm LDE6 1400 x 900 mm

LDE3 1500 x 800 mm LDE52 1500 x 1200 mm LDE14 1700 x 750 mm

For vinyl floors, supplied with WSF1/H vinyl floor gully with horizontal outlet as standard. Alternative options are available. See main brochure or website for details.

For tiled floors we offer the option of a Level-Dec stainless steel waste and membrane package. See details opposite.

3


Horizontal Outlet

50mm water seal with a 50mm outlet and a 40mm reducer

For Pumped Waste

Designed for use with a shower waste pump

Vertical Outlet

50 mm water seal

Slimline Waste

A waterless trap with a remov-able one way rubber seal

Waterguard®

• Co-Polymer membrane with butyl rubber backing creates a completely watertight barrier

• Polypropylene surface provides a key for the tile adhesive

• Can be used with epoxy grout and solvent based sealers for stone tiles

• Pre-made corners for faster and easier installation

• Self adhesive for easy application

• No curing time to enable faster installation

Fabric Membrane

• Co-Polymer membrane creates a completely watertight barrier

• Polypropylene surface provides a key for the tile adhesive

• Can be used with epoxy grout and solvent based sealers for stone tiles

• Pre-made corners for faster and easier installation

Waterguard® Kits

5m² Code: TS4 5m² of Waterguard® membrane; 500 ml BAL primer;

15m jointing tape; 4 x internal corners;

1 x external corner; Butyl sealant

10m² Code: TS310m² of Waterguard® membrane; 500 ml BAL primer;

20m jointing tape; 4 x internal corners;

1 x external corner; Butyl sealant

Fabric Membrane Kits

5m² Code: TS6 5m² of Fabric membrane; 12.5m jointing tape;

4 x internal corners; 1 x external corner

10m² Code: TS510m² of Fabric membrane; 25m jointing tape;

4 x internal corners; 1 x external corner

Tiled floor package option:

• Level-Dec EasyFit – Wetroom floor former

• Tiled floor waste

• A choice of Waterguard® or Fabric waterproof membrane

All tiled drainage options have a height adjustable stainless steel top, suitable for floor tiles 6mm – 26mm deep.

Waste Options

Code: ADGWH Code: ADPWT Code: ADGWV Code: ADGWHSWT200

86

6212

6

200

27

33

200

35

89

215 63

53

83

91

200

4


Slimline Shower Trays

A stylish Slimline tray offering low-level access at only 35mm high. These trays can be recessed into the floor or fitted with a sloping ramp around the entire perimeter for easier access, which is ideal for wheelchair access.

Robust GRP construction will support up to 250kg (40 stone)

Service ducting to conceal pipe work is available, which makes in-stallation easier by removing the need to chase out the floor or walls.

All trays come complete with a high quality waste fitting.

Size Range

Code: SLIMLINE800x800 Code: SLIMLINE900X900 Code: SLIMLINE1000X1000

Code: SLIMLINE1200X750 Code: SLIMLINE1200X900 Code: SLIMLINE1300X700

Code: SLIMLINE1300X750 Code: SLIMLINE1500X750 Code: SLIMLINE1700X750

Service Ducting and Ramp Kit

See Main brochure or visit our website for details of the Service Ducting and Ramp Kit

Versatile Installation

Can be recessed into floor for level access

Tiling upstand and 90mm trap supplied as standard with each Slimline tray

Alternative waste options available, shown opposite. Please specify when ordering.

298mm 298mm348mm 348mm

397mm 397mm

548mm

248mm

498mm

348mm

498mm

273mm

540mm

273mm

648mm

273mm

498mm

273mm

5


Blackdown 2 – Bath Replacement Shower Tray

These trays have been specially designed to cover all the sizes required to replace a bath, whilst still offering a low-level installation of only 40 mm high.

They can also be recessed into the floor. Made of robust GRP construction that will support up to 250kg ( 40 stone )

Code: Blackdown 2 1200 x 900 Code: Blackdown 2 1700 x 750

Can be cut to length

End cap supplied

Code: Blackdown 2 1700 x 850

Can be cut to length.

End cap supplied

Supplied as standard with each tray

Tiling upstand Horizontal outlet

Alternative waste options available at no extra cost. Please specify when ordering.

Vertical outlet

For pumped waste

Slimline waste

43

50

46

71

1587

115

111

221

198

186

115

56

61

90

1942

112

85160

49 1915

42

120

91

221

32

43 60

6


Freedom Doors

Shower doors that you can open and close at a touch

Water seals on The rubber floor seals also conventional shower have a unique profile and doors can make it difficult end insert to ensure the to open if they are not most watertight seal lifted clear of the floor. possible.

With the Freedom door A quick press on the hand you simply press a lever grip returns the door to to raise the door off the the floor and secures it floor. in position.

The rubber seal on the base of a conventional shower door can prevent smooth opening and closing, unless the door is manually lifted clear of the floor and this can be difficult for some users, especially those in a wheelchair.

The unique Freedom air assisted hinge is operated by a small lever that lifts the door clear of the floor, enabling it to be opened and closed at a touch. Once closed, a gentle push down secures the door in place and provides the most watertight seal.

The doors can also be secured when open to ensure that they cannot swing back whilst someone is entering the shower area.

The heart of the Freedom door is the spring mechanism, which is identical to those used successfully for many years as a support for the tailgate in hatchback cars – the utmost proof of its long lasting durability. It is completely maintenance free and covered by a lifetime guarantee.

The spring mechanism used has been tested for over 40,000 operations without failure.

7


Hinged Door Options

Option D Option E Option G

Two fixed panels, one 400mm fixed panel with Two bi-fold doors 400mm on front, with floor floor to ceiling pole and meeting in the middle to ceiling poles with one a pair of bi-fold doors door hung from each panel meeting on the corner

Option H Option J Option M

Two bi-fold doors One bi-fold and one One bi-fold door meeting meeting on the corner single door meeting on a fixed 400mm panel with the corner floor to ceiling pole

Sliding Door OptionsAll sliding door options are 750 mm in height and are supplied with a curtain rail and shower curtain.

Option 1 Option 2 Option 3 Option 4

Pair of sliding doors One set of sliding doors One fixed 400mm panel Pair of sliding doors hung meeting on the corner hung off one side latching with floor to ceiling pole between walls meeting in on opposite wall and one sliding door hung the middle from opposite wall

Option 5 Option 6 One 400mm fixed One fixed 400mm panel panel with floor to and floor to ceiling pole ceiling pole, one with a set of sliding sliding door hung off doors hinged from the pole and latching on wall pole and one set of sliding opposite doors hinged from the wall, meeting on the corner

All hinged door options are 750mm in height and are supplied with a curtain rail and shower curtain.

‘U’ rails are optional on all units and need to be specified on order.

Some door configurations are available left or right handed (left hand illustrated) where applicable.

8


Raised Height Toilets

Raised Height - Close Coupled Code: WCRPCC/CIST/L

Raised Height - Low Level Code: WCRPLL/CIST/L

Toilet Seat Code: WCBSEAT&LIDWH/BL

Toilet seat with lid and cross bar hinge. Retaining buffers prevent lateral movement.

Available in white or blue

Raised height close coupled WC pan – 455mm (approximately 485mm when toilet seat fitted)

Close coupled cistern with paddle lever handle and cistern fittings.

European manufacturer designed for UK market.

WRAS approved flush mechanism

LACB (LANTAC) compliant for Doc M Packs

Raised height low level WC pan – 455mm (approximately 485mm when toilet seat fitted)

Low - level cistern with paddle lever handle and cistern fittings.

European manufacturer designed for UK market.

WRAS approved flush mechanism

LACB (LANTAC) compliant for Doc M Packs

Paddle Lever Handle Code: WCCISTLLLEV

Padded Back Support Code: WCRPLLBPAD

9


Waste Options

Code: WHBWPC Code: WHBWCC

Full Pedestal Code: WHBATLASP

Semi Pedestal Code: WHBATLASSP

Concealed Basin Code: WHBFIX Fixings

Wash Hand Basins

“Atlas” Range The Atlas wash hand basin offers contemporary style with crisp clean lines that are designed for the demands of every day with value for money without compromising quality.

Our range offers 3 size options: 450, 500 and 550 mm width.

Each basin is available with the choice of one or two tap holes and is suitable for use with a semi pedestal or a full pedestal.

Size Code Width Depth Projection

Atlas 45 (450 x 390) WHBATLAS45 (2 tap holes) 452mm 122mm 383mm WHBATLAS45M (1 tap Hole)

Atlas 50 (500 x 426) WHBATLAS50 (2 tap holes) 500mm 127mm 410mm WHBATLAS50M ( 1 tap Hole)

Atlas 55 (550 x 475) WHBATLAS55 (2 tap holes ) 548mm 159mm 463mm WHBATLAS55M ( 1 tap Hole )

Concave Care BasinThe Concave care basin has

been designed for the home

rather than the commercial

bathroom. Contemporary

in style and manufactured

in Europe, this basin can be

installed at a fixed height or

with the optional pneumatic

system which allows the user

to tilt the basin to their comfort needs.

Concave Basin Code: WHBCARE65

Fixed Bracket (white) Code: WHBCAREFIXWH

Fixed Bracket (chrome) Code: WHBCAREFIXCHR

Pneumatic Tilt Bracket Code: WHBCARETILT

The Concave care basin has a single tap hole. Optional extras include; Mono bloc tap, Click

Clack waste, Bottle trap and Flexible waste pipe (for use with the pneumatic tilting mechanism ) See page 10 for details.

10


Taps and Waste

We offer a range of taps to compliment the wash hand basins.

Code: WHBLT

Value lever ½" basin taps, chrome finish. Tap bodies are of all brass construction. ¼ turn ½" ceramic disc valve. Supplied with 3" metal levers.

Code: WHBLQT

Quality lever ½" basin taps, contemporary style, chrome finish. Tap bodies are of all brass construction. ¼ turn ½" ceramic disc valve.

Code: WHBLTM2L

Value 2 lever mono bloc basin mixer tap with pop up waste. Tap bodies of all brass construction. ¼ turn ½" ceramic disc valve. Supplied with 3" metal levers.

Code: WHBLTM1L

Quality lever mono bloc basin mixer tap, contemporary style, chrome finish. Tap bodies are of all brass construction. ¼ turn ½” ceramic disc

Code: WHBLTM1LTMV3

Single lever TMV3 approved mono bloc mixer tap with progressive cartridge.

The flow regulator works by restricting the flow of water to a specific flow rate that helps save water without compromising performance.

Code: WHBWPC

Chrome waste with chain and plug

Code: WHBTRAP

McAlpine E10 white bottle trap

Code: MCALPFLEXCON1

Flexible waste pipe for wash hand basin. (suitable for use with the pneumatic tilting mechanism, see p. 9)

Code: WHBWCC

Chrome slotted click/clack waste

Code: TMV3-15A failsafe mixing valve with automatic shutoff, ensures safe hot water supply to the basin.

15mm compression fittings

11


“Slimfold” Shower Seats

The Slimfold shower seat is available either as a simple bench, or full seat with a backrest and arms, in a choice of both standard and special order colours. When folded the seat has a projection of only 111mm and the bench is even slimmer at just 55mm. Using cross bracing wall supports, instead of traditional floor standing legs, prevents the risk of trapping toes or banging feet, or of excessive weight on the legs damaging the floor. The seat can be mounted as low as 417mm if required and the top is slightly angled so that water runs off the back. The rounded and smooth seat is comfortable, feels warm to the touch and is easy to use. This revolutionary design, made in Britain using high quality corrosion resistant stainless steel, can support up to 300 kg (47 stone).

Bench Seat

Shower Seat

Grey (standard)Code: SFBSGR

Blue(standard)

Code: SFBSBL

Black Granite(special order)Code: SFBSBG

Sandstone(special order)Code: SFBSSS

Orange(special order)Code: SFBSOR

Pink(special order)Code: SFBSPK

Red(special order)Code: SFBSRD

Purple(special order)Code: SFBSPU

Yellow(special order)Code: SFBSYW

White(special order)Code: SFBSWH

Blue (standard) Code: SFSSBL

Grey(standard)

Code: SFSSGR

Black Granite(special order)Code: SFSSBG

Sandstone(special order)Code: SFSSSS

Orange(special order)Code: SFSSOR

Pink(special order)Code: SFSSPK

Red(special order)Code: SFSSRD

Purple(special order)Code: SFBSPU

Yellow(special order)Code: SFSSYW

White(special order)Code: SFSSWH

12


Full Height Glass Screens

“Pure” Range

The Pure range offers you a superb selection of glass panels fixed with slimline tubes and highly engineered brackets. As a further alternative, panels can be supported with shorter, more discreet slimline tubes with angled brackets. There is also the option of etched modesty panels or full satin finished glass. These panels are suited for Tiled or Vinyl wet room floors, or for installation with a shower tray. Made from 8 mm toughened glass and glassguard protected, which is a permanent treatment applied to the glass to reduce cleaning, resist harmful soaps and prevent the build up of grime and lime scale. These glass panels can be installed in a corner or an alcove and are all fully reversible for left or right hand installations. All panels are 2000 mm in height. Designed and built in Britain.

Fixed Panels (main and/or end panels)

Size Plain Glass Satin Glass Modesty Glass

700 mm SDPURE700 SDPURES700 SDPUREM700





Return Panel (optional, for use with fixed panel)

200 mm SDPURERP SDPURESRP SDPUREMRP

Chrome foot for return panel.

Angled brace fixing.

Alternative ceiling brace fixing.

If the glass screen is to be fitted on a vinyl floor, you will require a chrome finish wall bracket to allow for the coved edging.

Code: SDPURECOVED

Modesty Panel Satin Glass Panel

Fully opaque etched satin glass or etched modesty panels are available as an optional extra.

Please specify when ordering.

These glass screens can be simply silicone sealed direct to the floor, but for the neatest possible finish we also offer two alterative options – a discrete acrylic seal, or a stylish polished chrome trim.

Acrylic Seal Code: SDPUREFLSEALA

Chrome Seal Code: SDPUREFLSEAL

Each type of seal is supplied as a 1200 mm length which can be cut to required length at installation.

13


With Stylus the 8 mm toughened glass panel is held firmly in place by slimline tubes and superbly engineered brackets. As a further alternative, panels can be supported with a more discrete shortened tube and bracket mounted at an angle. Each pack is supplied with all the necessary fixtures and fittings. Wall channels allow a 20mm adjustment for out-of-true walls. Each panel is 2000 mm in height and glassguard protected, which is a permanent treatment applied to the glass to reduce cleaning, resist harmful soaps and prevent the build up of grime and lime scale. These glass panels can be installed in a corner or an alcove and are all fully reversible for left or right hand installations. Suitable for installation with a shower tray or tiled floor. Designed and built in Britain.

Main fixed panels

Size Plain Glass Satin Glass Modesty Glass

800 mm SDSTYLUS800 SDSTYLUSSP800 SDSTYLUSMP800




Fixed End Panel (for use with corner installation)


Return Panel (optional, for use with fixed panel)

200 mm SDSTYLUSRP SDSTYLUSSPRP SDSTYLUSMPRP

Chrome foot for return panel.

Straight brace fixing Angled brace fixing

These glass screens can be simply silicone sealed direct to the floor, but for the neatest possible finish we also offer two alterative options – a discrete acrylic seal, or a stylish polished chrome trim.

Acrylic Seal Code: SDSTYLUSAT

Chrome Seal Code: SDSTYLUSPCT

Each type of seal is supplied as a 1200 mm length which can be cut to required length at installation.

“Stylus” Range

Modesty Panel Satin Glass Panel

Fully opaque etched satin glass or etched modesty paels are available as an optional extra.

Please specify when ordering.

14


“Premier” Frameless Range

The Premier Frameless range of doors offer the minimal style of a wetroom panel with the added screening of a fully enclosed shower area. All enclosures are 2000 mm in height and made from 8 mm toughened glass, which is glassguard protected. This is a permanent treatment applied to the glass to reduce cleaning, whilst resisting harmful soaps and preventing the build up of grime and limescale. Each door features beautifully designed chrome hinges for smooth, silent operation. These enclosures are suitable for installation with a shower tray or a tiled floor. Designed and built in Britain.

HingedThe Premier Frameless hinged range feature a fixed panel with a hinged frameless glass door and are available either left or right hand opening, with matching side panels for corner entry.

Fixed Panel + Hinged Door for alcove

Size Code

800 mm SDPREMH800LH/RH

900mm SDPREMH900LH/RH



Side Panel for Corner Installation

800 mm SDPREM800SP

900 mm SDPREM900SP

Sliding

The Premier Frameless sliding range feature a fixed glass panel with a frameless glass door supported on easy-glide rollers and are available with either left or right hand opening, with a matching side panel for corner installations.

Fixed Panel + Sliding Door for Alcove

Size Code

1200 mm SDPREMS1200LH/RH

Side Panel for Corner Installation

800 mm SDPREM800SP

900 mm SDPREM900SP

15


“Supreme” Range

Supreme glass shower panels offer a luxurious appearance, whilst also providing practical support and ease of entry to the shower, fitted on either a wetroom floor (tiled or vinyl) or shower tray. The 8 mm safety glass panels are 2000 mm in height and are available in 5 widths and 3 glass finishes. The panels are supported by a polished aluminium column, which can be ceiling fixed or wall braced, which offers the option of hanging a shower curtain to provide further screening if required. The column is secured to the floor with an innovative new fitting that requires no screws and can be easily removed.

Modesty Panel Option

Ceiling fixed Option Satin Glass Panel Option Wall Braced Option

Supreme Glass Shower Panels – Floor to Ceiling Supreme Glass Shower Panels – Wall Braced

Size Plain Modesty Satin Size Plain Modesty Satin

700 mm SDSUPREME700 SDSUPREME700M SDSUPREME700S 700 mm SDSUPREMEW700 SDSUPREMEW700M SDSUPREMEW700S





For the wall braced screen option, we offer a range of shower curtains. All curtain options are 2000 mm drop and come complete with curtain rings.

Size Code

1200 mm wide SSC2000x1200



For areas where a coved vinyl floor has been installed you will need to order a coving extension profile.

Code: SDSUPREMECOVED

Get in touchTelephone: 01886 830119Fax: 01886 830118Email: [email protected]

Why not visit our e-commerce websitewww.practicalcareproducts.com

Practical Care Products Ltd

Upper InterfieldsLeigh Sinton RoadMalvernWorcestershireWR14 1UT

New Products For 2014 New eddition… · • A choice of Waterguard® or Fabric waterproof membrane...

Documents

Transcript of New Products For 2014 New eddition… · • A choice of Waterguard® or Fabric waterproof membrane...