NEW PRODUCTS 20 ‘Always Excel’ · MZ 4: Automatic centralised lubrication Optional Accessories...
Transcript of NEW PRODUCTS 20 ‘Always Excel’ · MZ 4: Automatic centralised lubrication Optional Accessories...
Manual Mills, Grinders, Drills, Saws, Belt & Disc Sanders, Edge Binders, Box & Pan Brakes,
Pallet Trucks & Lots More!
Visit : www.excelmachinetools.co.uk
NEW PRODUCTS 2020 ‘Always Excel’
NEW RANGE
0178 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Large Bed Mills BM 500 1-270-500
Featuresl Meehanite cast-iron
construction.l Rectangular guideways
Y/Z with high rigidity.l Hardened and ground
table surface.l Headstock swivels ± 30°l Heavy-duty, heavy cuttingl Spindle is driven by gears,
12 steps speed
Ideal for Heavy loads
Specification BM 500Electrical Connection 400V. 3ph.50HZ Spindle Speeds (steps) 12Table Size LxW 2000 x 400 mm Spindle Speed Range 66-1440 RPMTable T Slot Size/Dist/No. 18mm/100 mm/3 Swivel Angle of Mill Head ± 30°Table 'X' Axis Travel 1500 mm Dist.from Spindle to Table 100 - 650 mmTable 'Y' Axis (Ram Move.) 500 mm Dist. from Spindle to Column 600 mmTable 'Z' Axis (Head Move. 550 mm Main Motor Power 6.5 kW Table Feed Rate 'X' & 'Y' Axis 20-2000 (mm/min) Feed Motor AC Servo 2.8 kW Rapid Table Feed 3500 mm/min Coolant Pump Motor 0.9 kW Spindle Taper ISO 50 Dims LxWxH 300 x 229 x 234 cmSpindle Travel 105 mm Weight Kg 5000
Opt.Tooling/Acc
l Power Feed X Y Zl Complete Coolant Systeml Low Volt Machine Lightl Three axis DRO
Included as standard:
See pages 102 - 128 in main Catalogue
NEW
02 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Excel Opti. Toolroom MillsMZ 2 0334-6220 MZ 4 0334-6240
l Excellent damping characteristics and stability of machine chassis l All guides tempered, precision ground,and adjustable using cleats l X and Y axis with adjustable dovetail guide l Automatic feed on X, Y and Z axis,continously adjustable l All axis with ball screws l Central and clearly arranged control panel withintegrated digital position and speed display l Solid cross table, generously dimensioned with precisionsurface finish and 5 T-slots l Coolant system l Control panel swivels centrally for a clear-cut overview
l Generously dimensioned hand wheels with scales l Machine lamp
Features
3-axis display display Newall DP 700
MZ 2 Manual centralised lubrication system MZ 4: Automatic centralised lubrication
Optional Accessories
l 4 x arbour ISO 40 with counter-bearing l 16 mm external diameter l 22 mm external diameterl 27 mm external diameter l 32 mm external diameter l Adapter ISO40 - MK3 l MT 2 collet l MT 1 collet l Operating tool
Included as standard:
l MVSP 150 x 200 0353-0104 l MVSP 150 x 300 0353-0108 l Collet chuck ISO 40/ER32 0335-2056l Hydraulic clamping device BT 40*
(factory fitting only) 0334-6226l Compressed air tool changer
(factory fitting only) 0334-6225
Angle Table l Table Length x Width 375 x 660 mml Max load bearing capacity 150 kgl T-Slot Size/No/Dstance 12 mm / 8 / 45 mml Dims 895 x 433 x 354 mml Weight 140 kg 0334-6221
Optional Tooling
See pages 102 - 128 in the main Catalogue
NEW
0380 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Excel Opti. Toolroom MillsMZ 2 0334-6220 MZ 4 0334-6240
3-axis display display Newall DP 700
Cross table housing l Supplied pre-assembled
on the machinel Protection against
chips and coolantl Folds away to allow
optimal access tothe workspace
Electrical Connection 400V. 3ph. 50 HZTotal Connected Load 4.0 kW 5.4 kW Spindle Drive Motor 2.2 kW 3.75 kW Rapid Feed Motor 0.375 kW 0.75 kW Coolant Pump Motor 95 WDrilling Capacity in Steel Ø 30 mm Ø 32 mmContinous Drilling in Steel Ø 26 mm Ø 28 mm
Max. Sensor head Size Ø 100 mm
Max. Shaft Milling cutter size Ø 25 mmSpindle Speeds (RPM) 50 - 1890 30 - 2250 Speeds 12 18Spindle Seat ISO 40 DIN 2080 Spindle Sleeve stroke 120 mmDraw - in rod M16Throat (Max) 100 mm 185 mm Vertical Rotation area ± 90°Clearance Vertical Spindle to Cross table 75 - 410 mm 130 - 530Vertical Length x Width 830 x 250 mm 1200 x 250 mmMax.Load bearing capacity 385 Kg 500 KgT-Slot size/spacing/count 14 mm / 63 mm / 2 14 mm / 63 mm / 3Clearance Horiz.Spindle to cross table 70 - 400 mm 130 - 390 mmHorizontal Length x Width 750 x 320 mm 900 x 500 mm Max. Load bearing capacity 385 Kg 500 KgT-slot size/ Spacing / count 14 mm / 63 mm / 5 14 mm / 63 mm / 7 X Axis (Cross table) Man 400 mm / Auto. 360 mm Man. 600 mm / Auto 560 mmY Axis (milling head) Man 200 mm / Auto. 160 mm Man. 480 mm / Auto. 440 mmZ Axis (cross table) Man. 365 mm / Auto. 325 mm Man. 385 mm / Auto. 345 mm Drive Speed feed / rapid motion 50 - 450 / 700 RPM 50 - 450 / 800 RPM Feed Speed 10 / 600 mm / minL x W x H 124 x 117 x 190 cm 161 x 83 x 189 cmWeight Kgs 1180 Kg 1450 Kg
Specification MZ 2 MZ 4
NEW
04 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Opti Turret Mill MF 2V 0333-6030 MF 4V 0333-6050
l Heavy, solid design using premium cast meehanitel Excellent concentricity thanks to tapered roller bearings,
better than 0.01mm measured in the spindle sleevel Automatic spindle sleeve feedl Right and left hand rotation for thread tappingl X and Z axis with adjustable dovetail guidel Coolant System
FeaturesMF 2V :
l Y axis with adjustable dovetail guide
MF 4V :l Y axis with flat guidel Large Y axis stroke of 400 mml Motorised table height adjustment with rapid
motion (Z axis).
Optional Attachments:
Power Draw Bar 0335-2394
l Power Feed to Quill-3 ratel Servo Type Feed & Rapid for Longitudinall Up & down Motorised for MF4Vl One Shot Lubricationl Coolant System
Included as standard:
Optional Tooling/Accessories:
l Electrically Interlocked Spindle Guardl Large Size Base Trayl Low Volt Machine Lightl 3 Axis DROl Frequency inverter Siemens
See pages 102 - 128 in the main Catalogue
Electrical Connection 400V. 3ph. 50 HZTotal Connected Load 2.2 kW 4 kW Spindle Drive Motor 1.5 kW 3.0 kWCoolant Pump 100 WDrilling Capacity in Steel Ø 24 mm Ø 32 mmContinous Drilling in Steel Ø 20 mm Ø 28 mm
Face Mill Capacity Ø 76 mm Ø 100 mmEnd Mill Capacity Ø 18 mm Ø 20 mmSpindle Sleeve Travel 127 mm Spindle Taper ISO 40 Din 2080Spindle to Column 213 - 533 mm 200 - 680 mmSpindle Speeds RPM 10 - 5,100 9 - 6,750Gears 6 speed electronic control 8 speed electronic control Head Swivel ± 45° Automatic Spindle Feeds 3 steps 0.04 - 0.15mm/revSpindle to Table 57 - 463 mm 40 - 446 mm
Table Size LxW 1,244 x 230 mm 1,370 x 254 mmCross Table Max Load 230 Kg 275 KgTable T-Slots (size/amount/spacing) 16mm / 3 / 63X axis Travel (Manual/Automatic) Man. 800 mm /Auto. 730 mm Man. 930 mm / Auto. 850 mmY axis Travel (Manual) Manual 305 mm Manual 400 mm Z axis Travel Manual 406 mm Manual 406 mm/Auto 350 mmDims LxWxH (cm) 140 x 145 x 215 150 x 145 x 220 Weight Kgs 950 1150
Specification MF 2V MF 4V
NEW
0586 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Opti Turret Mill Variable Speed with Siemens Sinamics G110 M Frequency inverter
Opti Control Panel Integrated switch panelIntegrated digital position display DPA 21 with speed display
Drilling/milling head Pivoting ± 45°Throat 215 - 533 mm - MF 2V 200 - 680 mm - MF 4V
Optional Power Draw Bar
Drilling depth stop Adjustable with millimetre scaleCan be read off on front
Frequency inverter Sie-mens Sinamics G110 M Quality made in EU
X axis Motorised table feedContinuously variable speed controlRapid traverseRight & left handed rotation
06 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Deburring & Chamfering M/cs KE 100 0399-2000
Featuresl For creating clean visible edges and preparing welds l Device for stationary or mobile usel Easy and quick change-over from stationary to mobile use with wing nuts and removable footl Tool-free setting of the chamfer depth l Standard angle settings at 15°, 30° and 45°l Manual feed l Patented technology l Handy and powerful device l For machining constructionsteel, non-ferrous metals and plastics l Functional arrangement of the handles allows for safe guidingof the device in mobile operation l Guide plate equipped with adjustable ball heads for smooth runningof the workpiece l Automatic safety shutoff in case of overheating
Specification KE 100 Chamfer angle 15° / 30° / 45°Chamfer width at 15° approx. 5 mmChamfer width at 30° approx. 6 mmChamfer width at 45° approx. 7 mmElectrical connection 230 VServices 750 WSpeed (cont. variable) 2000 - 5000 rpmDims (L x W x H max.) 360 x 230 x 280 mmWeight 10.5 Kg
l Edge deburring device KE 100l Milling head with cutting platesl 3 rubber feetl Workpiece slide
Included as standard:
Optional Accessories 1.Milling Head 0399-20052.Cutting Insert Set 0399-2006
NEW
Cutting inserts
07102 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Deburring & Chamfering M/csKE 100 0399-2000
Deburring & Chamfering M/cs
CDM 3 1-298-100
CHAMFERING & DEBURRING MACHINE
Specification CDM 3
Chamfering Cap. 0 - 3mmChamfering Angle 15 - 45Length of Guide Rails 500 mmPower 1HP (1ph)Space Required LxW 500 x 250 mmWeight 30 Kgs
o
Uses Indexable Side Milling Cutter
Acrylic Glass Aluminium Steel Stainless Steel Brass Plastic
Stationary Use
08124 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
No 4 Morse TaperDiameter Stock Number
M2 HSS
l Effectively reduce vibration andinstulate against noisel Fast and technically uncomplicated
levellingl Eliminates floor unevenness up to 5ºl Precision levelling by means
of a regular threaded screw
l Jackscrew M12 x 1 x 150l Maximum load: 600 kg
l Jackscrew M16 x 150l Maximum load: 1 500 kg
Milling Accessories CARBIDE END MILL SET
l 18-part; 3 each in the sizes3, 4, 6, 8, 10 and 12 mm
l 4-cutting edge versionl Coated solid carbide end mill (TiALN)l Centre cut for plungingl Rake angle 35°
3 pc. each
RADIUS END MILL SET
l 9 - part; 3 each in the sizes 4 mm, 6 mm, 8 mml 2 - cutting edge versionl Coated solid carbide end mill (TiALN)l Face cutting geometry for plungingl Rake angle 30°
3 pc. each
EDGE SENSOR
0335-2118
0335-2116
0335-1171l Rotating spindlel Probe Ø 10 mm
0335-2981
0335-2982
ANTI VIBRATION LEVELLING MOUNT
WORKPIECE SUPPORTMaterial S 45CWPS-1 adjustment stroke 40 - 50 mm 0335-4261WPS-2 adjustment stroke 65 - 90 mm 0335-4262WPS-3 adjustment stroke 90 - 140 mm 0335-4263WPS-4 adjustment stroke 140 - 230 mm 0335-4264
Min Height (A)mm
40 50 30 40 50 0.3 65 90 28 38 50 0.4 90 140 40 50 50 1.1140 230 45 55 50 2.3
MaxHeight (B)mm
ØCmm
ØD mm
Load Kn
WeightKg
NEW
SE 85
SE 55
976 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Miscellaneous Accessories for Lathes, Mills, Drills & Grinders
VIBRATION DAMPER MACHINE MOUNTl Some Machines &
devices can be installedwithout anchoringexactly level by meansof height adjustment.
l Machine capability isimproved by effectiveimpact & vibrationdamping.
Stock Numbers SE 1 0338-1012SE 2 0338-1016SE 3 0338-1018
Specification Milling Machines 340kg 460kg 1’600 kgSawing/gen machine 570kg 1,460kg 3,500kgThreading M12 M16 M20Base Ø mm 120 160 185 Base Height mm 32 35 39
Specification SE 1 SE 2 SE3
Coolant Lubricant Sprayer MMC1
COOLANT EQUIPMENT
l Delivery height max. 2.5mal Delivery Volume 8 l/minl Tank Capacity 11 ll Tank size LxWxH: 370x245x170mml Complete inc. tank, flexible tube, hosel With switch-plug combinationl Magnetic anchoringl For self-assembly
l Magnetic standl Foot size LxWxH 62 x 50 x 55 mml Connecting coupling for external
compressed air supplyl Magnetic stand holding force 75 kgl Flexible & rigid hosel Length of coolant hose 500mm
COOLANT LUBRICANT SPRAYER MMC 1
COOLANT HOSE KMS 2
l Two variable coolant hosesmade ofindividual plastic elementsl Not electoconductivel Magnetic stand holding
force up to 50kgl Length of the coolant
hoses 335 mml Flexible and stablel Resistant against most solvents &chemicalsl Universally applicable on all machine tools
Features
0335-1999
0335-2001
0335-6660
0335-6663Features
Features
400 V / 3PH
KME1 230 V / 1PH
NEW
10 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Heavy Duty DrillsDH 55G 0303-4265
l Heavy, solid cast designl Dirt/water-resistant, easy-to-clean membrane keyboardl 24 V DC electronicsl Electrical spindle sleeve feedl Drilling depth stopl Automatic gearwheel lubrication via oil pumpl Thread tapping device.l Machine lamp integrated in drilling headl Generously dimensioned, height adjustable
protective screen with safety switch for greatestpossible user protection
l Generously dimensioned drilling table, solid,precision workmanship,with parallel T-slots andrecirculating coolant duct, reinforcing ribs on rear,rotates through ± 90° about the column, laterally tilting
l Motorised drilling table height adjustmentl Cooling unit and external coolant tank,
can be removed for easier and complete emptyingl Chip filter in line with Machinery Directivel Extremely stable, thick-walled cast-iron
column for excellent force absorptionl Solid base plate with parallel T-slots,
precision surface finishl Optional footswitch available for toggling
between clockwise and anticlockwise runand for thread tapping
Geared Head Thread
Tapping
Features:
Included as Standard Optional Tooling:See pages 148 - 156 in main Cat
l Drill Chuck
l Machine Light
l Drill Chuck Arbor
l Coolant
Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 60 mm Drilling Cap Steel 50 mm Tapping Cap Cast Iron M50 Tapping Cap Steel M42
Spindle Taper MT4 Max Drilling Depth 200 mm T-Slot Size / Space / No. 18mm / 150mm /2Table incline / rotate ± 90° / 360°Table Load Max 350 KgTable Size 600 x 600 mmBase Size 515 x 570 mm Spindle to Column 400 mm Spindle to Table 130 - 750 mm Spindle to Base Max 1300 mm Column Diameter 200 mm Drilling Feeds 3 Steps 0.1 / 0.15 / 0.2 mm/rev
Main Motor 2.2 / 2.8 Kw
Spindle Speeds RPM (16) 45 - 2000Coolant Pump 100 WDims LxWxH cm 85 x 105 x 250 Weight Kg 850
Specification DH55 G
Auto Quill Feed
NEW
11 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Heavy Duty DrillsDH 35G 0303-4250 DH 45G 0303-4255
l Heavy, solid cast designl Automatic gearwheel lubrication
via oil pumpl Excellent concentricity thanks
to hardenedand polished main spindle
l Thread tapping device.l Main switch and motor
circuit breakerl Generously dimensioned,
height adjustableprotective screen with safetyswitch for greatestpossible user protection
l Drilling depth stopl 24 V DC electronicsl Mechanical spindle sleeve feedl Dirt- and water-resistant,
easy-to-cleanmembrane keyboard
l Optional footswitchavailable fortoggling between clockwise/anticlockwise run and forthread tapping
Features:
Geared Head
Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 40mm 45 mmDrilling Cap Steel 35mm 40 mmTapping Cap Cast Iron M30 M40 Tapping Cap Steel M25 M35
Spindle Taper 4MTMax Drilling Depth 125mm 180 mmT-Slot Size 14mm 16 mmTable incline / rotate ± 90° / 360° Table Load Max. 200 Kg 250 Kg Table Size 400 x 420mm 530 x 530 mmBase Size 450 x 660mm 480 x 880 mm Spindle to Column 285 mm 350 mmSpindle to Table Min. 65 mm 130 mm
Max. 800 mm 725 mmSpindle to Base 1217 mm 1210 mmColumn Diameter 115 mm 150 mm Drilling Feed mm/rev (3) 0.005, 0.15 (3) 0.1, 0.2Main Motor 1.5 / 2.2 kW 2.2 kW
Spindle Speeds RPM (8) 75 - 2000 (8) 90 - 1520Coolant Pump 40W 40WDims LxWxH cm 73 x 45 x 218 88 x 60 x 245 Weight Kg 450 560
Specification DH 35G DH 45G
Included as Standard
Optional Tooling:
See pages 148 - 156 in the main Catalogue
l Quick action Drill Chuck 1-16mm B16
l MT4 B16 Drill Chuck Arbor
Thread Tapping
NEW
DH35G
DH 45G
12142 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
* Tapping capacity will vary depending on the pitch of thread
Radial Drill RD 3
Small Size0304-9030
Optional Tooling:See pages 148 - 156
Inc. as Standardl Machine standl Box Tablel DC Injection Brake
for Quick Stopping
Electrical Connection 400 V. 3 ph.50 HZ Spindle Motor 0.55 / 1.1 kWDrilling in Cast Iron 32 mmDrilling in Steel 28 mm Tapping in Cast Iron 16 mm Tapping in Steel 12 mmSpindle Travel 130 mm Spindle Taper 3 MTThroat 160 - 530 mmNo. Spindle Speeds 2 x 5 Spindle Speed Range 155 - 2250 rpm Column Diameter 115 mmMax Spindle to Column 530 mmMin Spindle to Column 160 mm Hori.Travel Headstock 370 mm Max Base to Spindle 630 mmMin Base to Spindle 170 mm Machine Height Floor 2150 mm Dims of Base LxW 87 x 65 cm Box Table Sizes (RxSxT) 280 x 230 x 200 mm Dims LxWxH cm 87 x 65 x 215 Weight Kg 288
Specification RD 3
NEWl Versatile range of applicationsl Powerful premium motorl Electrically braked motorl Long reach thanks to horizontally adjustable machine headl Mechanical head, column and boom clampingl Solid grey cast iron ensures stability, smooth
action and precisionl Spindle with precision taper roller bearingsl Guaranteed concentricity better than 0.015 mm
measured in the drilling spindle sleevel Large speed range from 155 - 2 250 rpm
thanks to two-speed motorl Sold, precision drilling table, generously
dimensioned with precision surface finish andparallel T grooves
l Thick-walled steel column (Ø 115 mm)ensures smooth action and stability
Features:
280
230
18
200
26
16
98
9816
770870
760
160 - 530
Ø 115
170
- 630
1550
645
510
500
13 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Edge Deburring & Counter Sinking KE 6-2 0399-0007
Features:l Ideal for ensuring clean visible edges and preparing weldsl Handy and powerful device l Setting the chamfering height without tooll For machining building steel, aluminium and other materialsl For deburring radii and drill holes from 20 mm diameterl With 3-fold turnover plate holder l Manual feedl Speed from 3,000 to 6,000 rpm continuously variable
Specification KE 6-2Chamfer angle 45° (optional 30°)Chamfer width at 45° 0 - 6 mmElectrical connection 230 V/50 HzServices 1,100 WattsSpeed (cont.variable) 3000 - 6000 rpmDims(L x W x H) 308 x 344 x 273 mmWeight 4.7 Kg
l Plastic casel 3-fold turnover plate holder 45°l 1x Cutting plate set consisting
of three 4x indexing insertsl 1x Tool kitl 1x Side handle
Included as standard: Optional Accessories 1. 30° tool holder 0399-00202. 45° tool holder 0399-00213. Cutting Inserts
set of 10 0399-00224. Guide roller 45° 0399-00235. Guide roller 30° 0399-0024
KE 6-2 with mounted side handle
NEW
Cutting Inserts
14146 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
l Ideal for ensuring clean visible edges and preparing welds l Handy and powerful device l Setting the chamfering height without tool l For machining building steel, aluminium and other materialsl For deburring radii and drill holes from 20 mm diameter l With 3-fold turnover plate holder l Manual feedl Speed from 3,000 to 6,000 rpm continuously variable
Tightening Screw
Rotary Head
Tightening Screw
Depth Stop Housing
Motor
Handle
On/Off SwitchSide
Handle
Safety SlipClutch
Universal Chuck for holding tap
Electric Thread Tapper GS 18 0386-0018
Features:l Reversing gear allows for very fast processing: without pressure on the spindle, the tool does not move;
pressure on the spindle starts slow clockwise action of the tool, and pulling back automatically enablesquick reverse at 680 rpm l Easy thread tapping in a single step thanks to high torque, low speedand excellent concentricity precision l The universal chuck for standard thread taps fromM6 to M18 ensures a long tool service life l Additional handle allows for optimally orientated andconvenient tool guidance l Compensates for cutting tool angular offset in the borehole thanks toan articulated coupling between the chuck adapter and threaded chuck l Thread tapping inblind holes with depth stop incl. as standard
Specification GS 18 Tapping Range M6 – M18Steel (S235JR) short-term operation M18Steel (S235JR) continuous operation M14Aluminium short-term operation M18Aluminium continuous operation M16Idle forwards (clockwise) 280 rpmIdle reverse (anti-clockwise) 680 rpmUnder load (CW run) 170 rpmUnder load (CCW run) 410 rpmRating 450 WPower cable length 3 mElectrical connection 220 – 240 V, 50 - 60 Hz, 1 PhDims 400 x 325 x 240 mmExplanations of dims Additional handle at 90° to the device handleWeight 3.15 Kg
l Universal chuck M6 –M18with slip clutch
l Additional handlel 4mm Allen keyl Depth stopl Transport case
Included as standard:
Transport Case
NEW
15 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Clamping Kits & Clamps
Plastic Carry Case
PK106M MAYBE PACKED DIFFERENTLY DUE TO WEIGHT
HOLD DOWN CLAMP SETSl Clamping height adjustablel Brass plate below clamping arm protects
the material from damage
Table groove 14mmStud Size 12mm l LxWxH 115 x 42 x 39 mml Height adjustment 0-89 mm
0335-2031
Table groove 18mmStud Size 16mml LxWxH 133 x 50 x 49mml Height adjustment 0-101 mm
0335-2032
NEW
*May be packed differently due to weight
l A most essential accessory – a complete answer to clampingl Saves setting up time l Covers a wide rangel Choice of models.
58 Pc. Steel clamping kit includes;l 24 Pcs Studs 4 of each length 3”,4”,5”,6”,7” and 8”l 6 Pcs T nuts, 6 Pcs Flanged Nuts l 4 Pcs Coupling Nuts,
6 Pcs Step Clamp l 12 Pcs (6 Pairs) Step Blocks.
CLAMPING KITS
Specification
MODEL
T SLOT SIZE
Stud Size
Weight Kgs Stock Number
PK103 ¹/2” ³/8” 16NC 8 3-100-100PK104 ⁵/8” ¹/2” 13NC 12 3-100-200PK105 ³/4” ⁵/8” 11NC 16 3-100-300PK103M 12mm 10mm 8 3-100-100MPK104M 14mm 12mm 12 3-100-200MPK104M2 16mm 12mm 12 3-100-200M2PK105M 18mm 16mm 16 3-100-300M*PK106M 20mm 18mm 31 3-100-400M*May be packed differently due to weight
Features
16 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Drilling Accessories COUNTERSINK SET 0320-1050
l As per standard DIN 335Cl 6-part: 6/8/10/11.5/15/19 mml Premium conical counterbore Burrs are
nicely chamfered and removed withoutcausing scratcheslCompatible with popular battery-powered screwdrivers and drills, including Upright drillsl Practical plastic case
COUNTERBORE SET0320-1051
l As per standard 373l 6-part: for M3 / M4 / M5 / M6 / M8 / M10 mm screwsl HSSl Piloted counterbore size 6.5 x 3.2 mm / 8 x 4.3 mm / 10 x
5.3 mm / 11 x 6.4 mm / 15 x 8.54 mm / 18 x 10.5 mml Fine grade for countersinking screws and
nuts as per DIN 74l Practical plastic case
STEP DRILL BIT SET0320-1056l 3-part: 4 - 12 mm / 12 - 20 mm / 20 - 30 mml Drilling and deburring cylindrical holes in
materials up to 4 or 6 mm thickness.l Shank with three clamping surfacesl Drill step increment 1 mml Practical plastic case
DRILL & TAP SET 0320-2015l Through borel 15-partl 7 pcs. spiral bit DIN 338
7 pcs thread tap
l Ø2.5 mm Ø3.3 mm Ø4.2 mml M3 M4 M5
l Ø5.0 mm Ø6.8 mm Ø8.5 mmM6 M8 M10
l Ø10.2 mm M12
l Tap wrench DIN 1814 size 1½l Practical plastic case
NEW
17 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Large Hydraulic Surface Grinders ESG 50160 NC ESG 60220 NC ESG 80300 NC1-496-516 1-496-622 1-496-830
Features:
l Well designed cast iron throughly ribbed structure provides excellent dampening. l Grinding spindle features low-maintenance
preloaded high precision angular ball bearings. l 'V' and flat type guide way which precision hand scraped turcite
saddle ways for smooth and long lasting performance. l Table guideways are hardened, ground and counter-laminated with
PTFE (TEFLON) to ensure high wear-resistance.
l Centralised auto lubrication system, supplies oil to guide-ways and lead-screws as the machine operates . This system,
ensures all the critical components are lubricated with the right amount of oil at all times.
l Separate hydraulic tank prevents heat and vibration from being transferred to the machine.
l Electric components and functional modules are well arranged and packed in the electric cabinet, making maintenance and
trouble-shooting easily accessible l Safety 24V control circuit power
Included as standard:
l PLC + HMI Auto Grind Controllerl Coolant Systeml Wheel Balancing Arborl Wheel Balancing Standl Wheen Flange & Extractorl Grinding Wheell Overhead Parallel Wheeldresserl Low Volt Machine Lightl Electro Magnetic Chucks
l Built in Magnetic Chuckl Built in Demagnetiserl Splash Guardl Levelling Wedge and Screwl Operating Manuall Electro Mag Chuck:
500x800mm x 2 pieces for ESG 50160 NC600x1000mm x 2 pieces for ESG 60220 NC800x1000mm x 3 pieces for ESG 80300 NC
NEW
18160 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Paper Strip Filter with Magnetic Separator & Coolant System (120i Tank) 1-496-900Closed Oil Tank Guard 1-496-910
Wheel Flange for 50160 NC/60220 NC 1-496-920 Wheel Flange for ESG 80300 NC 1-496-930
Optional Accessories:
NC Series Easy to setup, roughing, finishing and spark out by HMI & PLC
Table Size (mm) 500 x 1600 600 x 2200 800 x 3000 Max. Table Travel Longitudinal (mm) 1700 2300 3100 Max Table Travel Cross (mm) 575 675 900 Spindle to Table Surface (mm) 600 600 920 Maximum Table Load (Kg) 900 1690 3500 Magnetic Chuck Size (mm) 500x800x2 pieces 600x1000x2 pieces 800x1000x3 piecesLongitudinal Table Speed m/min 5-25 5-25 5-25Cross Intermitent Feed mm/t 1-20 1-20 1-30Cross Feed Rapid mm/min 50-1500 50-1500 50-2000Cross Feed of MPG mm/div 0.005 0.005 0.005 Auto Downfeed Rate mm/t 0.005, 0.01, 0.005, 0.01, 0.005, 0.01, 0.02,
0.02, 0.03, 0.04 0.02, 0.03, 0.04 0.03, 0.04, 0.05 Rapid Downfeed mm/min 50-500 50-500 50-2000Vertical Feed of MPG mm/div 0.005 0.005 0.005 Grinding Wheel Speed RPM 1440 1440 960 Grinding Wheel Size mm Ø355x(20-50)Ø127 Ø355x(20-50)Ø127 Ø500x75xØ203Spindle Motor (Kw) 7.5 7.5 18.5 Oil Pump Motor (Kw) 3 5.5 7.5Y/Z Servo Motor 2/0.5 2/0.5 3 Packing Dims (LxWxH cm) 564x225x228 635x230x250 820x400x260 Weight (Kg) 6000 8000 14000
Specifaction ESG 50160 NC ESG 60220 NC ESG 80300 NC
NEW
19 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
UCG 2075 1-517-075UCG 30150 1-517-150
UCG 50200 1-517-200UCG 50300 1-517-300
Universal Cylindrical Grinders
General Capacity Between Centres mm 750 1500 2000 3000 3000 4000Centre Height mm 135 180 270 270 370 370 Dia. Ground (O.D) mm 5 - 200 8 - 320 25 - 500 25 - 500 30 - 630 30 - 630Dia. Ground (I.D) mm 25-100 30-100 30-200 30 - 200 30 - 250 30 - 250
Max Length (O.D)mm 750 1500 2000 3000 3000 4000Max Length (I.D) mm 125 125 320 320 320 320 Max Weight Kg 100 150 1000 1000 3000 3000 Workhead Swivel Angle + 90° + 90° + 90° + 90° + 90° + 90°Spinder Taper MT 4 4 6 6 6 6Spindle Speed (Vario) RPM 25-380 25-220 20-224 20 - 224 14 - 140 14 - 140Wheelhead Wheel Spindle Speeds RPM 1670 1670 1335/665 1335/665 1335/665 1335/665
Rapid Stroke Hyd. mm 50 50 100 100 100 100
Max. Travel mm 205 245 370 370 450 450Swivel Angle +10° ± 30° -30° -30° ± 30° ± 30°Man. Feed per Rev mm Rough 2 2 4 4 4 4
Fine 0.5 0.5 0.5 0.5 0.5 0.5Manual Feed per Grad mm 0.01 0.01 0.02 0.02 0.02 0.02
Fine 0.0025 0.0025 0.0025 0.0025 0.0025 0.0025
Wheel Size (ODxWxID) mm 400x50x203 400x50x203 500x75x305 500x75x305 600x75x305 600x75x305Wheel Speed RPM 1440 1440 960 960 750 750Internal GrindingInter. Spindle Speed r/min 1 0000,15000 10000,15000 10000 10000 10000 10000Inter. Wheel Size Max. mm 50x25x13 50x25x13 175x32x32 175x32x32 175x32x32 175x32x32
Min . mm 17x20x6 17x20x6 30x25x10 30x25x10 30x25x10 30x25x10Table Table Travel per rev mm 6 6 5 5 5 5Max Table Swivel Clockwise 3° 3° 2° 2° 1° 1°Max Table Swivel Anti Clock. 8° 6° 5° 3° 3° 1.5°Long. Travel Speed m/min 0.1-4 0.1-4 0.1-3 0.1-3 0.1-2.5 0.1-2.5Tailstock Tailstock Quill Taper MT4 MT4 MT6 MT6 Metric 80 Metric 80Tailstock Quill Travel mm 30 30 70 70 70 70MotorWheelhead Motor kW 4 5.5 5 / 7.5 5 / 7.5 7 / 11 7 / 11 Inter. Grinding Motor kW 1.1 1.1 1.5 1.5 1.5 1.5Workhead Motor kW 1.1 1.5 4.0 4.0 15 15 Machine Dims LxWxH cm 275x203x205 422x203x205 585x228x210 785x228x210 890x242x226 1100x242x226 Weight Kg 4300 6100 12000 15000 22000 24000
Features:l Guideways are plastic coated,provide frictionless movement. l Hydraulic system is smooth and low noise.l Rigid and high precision; Roundness 0.0025mm Parallelism 0.008mmRoughness um Ra <0.32l Hydraulic longitudinal feed lWheelhead manual feed lWheelhead rapid approach and retractation,l 8 steps automatic wheelhead feeds but manually setting (0.0025-0.04mm) .
Specifaction UCG 2075 UCG 30150 UCG 50200 UCG 50300 UCG 63300 UCG 63400
UCG 2075 200x750mm
UCG 30150 300x1500mm
UCG 50200 500x2000mm
UCG 50300 500x3000mmUCG 63300 630x3000mm
UCG 63400 630x4000mm
NEW
20162 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
For External & Internal Grinding UCG 63300 1-517-320 UCG 63400 1-517-400
Included as standard:l Coolant Tankl Wheel Dresserl Grinding Wheel
& Flangel Flange and
Wheel Extractorl Wheel Balancing Standl Balancing Mandrall Levelling Wedgesl Solid Centresl Wheel Removing Tooll Internal Grinding
Attachmentl Grinding Wheel Spindlel Work Lamp
Optional AttachmentsClose Steady for UCG2075 1-517-900Close Steady for UCG30150 1-517-901Close Steady for 50200/50300 1-517-902Close Steady for 63300/63400 1-517-903Magnetic Separator Coolant 1-517-910Paper Filter Coolant System 1-517-911End Wheel Dresser for UCG2075 1-517-920
End Wheel Dresser UCG30150 1-517-921End Wheel Dresser 50200/50300 1-517-922End Wheel Dresser 63300/63400 1-517-923Radius Wheel Dresser UCG2075 1-517-930Radius Wheel Dresser UCG30150 1-517-931Radius Wh Dresser 50200/50300 1-517-932Radius Wh Dresser 63300/63400 1-517-933
UCG 2075
UCG 50300
NEW
21 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Cylindrical External Grinders CEG 2052 CEG 2075 CEG 20100 1-518-052 1-518-075 1-518-100
Features: l The Structure is well designed for high accuracy and efficency. l Workpiece, wheel, oil pump and coolant pump are driven by their individual motors.l Hydraulic drive, electric control are easy to operate l Hydraulic Tailstock with foot switchl Suitable for batch and mass production for grinding cylindrical workpieces
Diameter to be ground (mm) 8 - 200 8 - 200 8 - 200Dist.Between Centres (mm) 520 750 1000Centre Height (mm) 125 125 125Max Workpiece Weight (Kg) 50 50 50
Max. Longitudinal Travel (mm) 600 800 1080Max Swivel Angle (degree) -5° - +9° -3° - +9° -3° - +7°Hyd. Traverse Speed (m/min) 0.1 - 4 0.1 - 4 0.1 - 4 Travel Per rev. of Handwheel (mm/r) 6 6 6Workhead Spindle Speeds (RPM) 60, 85, 230, 120, 170, 460Workhead Centre Taper MT3 MT3 MT3 Workhead Chuck Diameter (mm) 125 125 125Tailstock Centre Sleeve Travel (mm) 25 25 25Wheelhead Rapid Travel (mm) 20 20 20Wheelhead Travel per revolution of Handwheel (mm) 1 1 1Movement per Graduation on micro adjustment Knob (mm) 0.00125 0.00125 0.00125Wheelhead Spindle Speeds (RPM) 2230 / 1820 2230 / 1820 2230 / 1820Traverse of Wheelhead (mm) 150 150 150 Wheel Size (mm) Ø400x(40-50) Ø203 Ø400x(40-50) Ø203 Ø400x(40-50) Ø203Wheelhead Motor (kW) 4 4 4Workhead Motor (kW) 0.75 0.75 0.75Oil Pump Motor (kW) 0.75 0.75 0.75 Coolant Pump Motor (kW) 0.125 0.125 0.125Dimensions LxWxH (cm) 200 x 140 x 160 270 x 140 x 160 310 x 140 x 160Weight (Kg) 2500 2900 3000
Specification CEG 2052 CEG 2075 CEG 20100
NEW
22164 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
l The Structure is well designed for high accuracy and efficency.l Workpiece, wheel, oil pump and coolant pump are driven by their individual motors.l Hydraulic drive, electric control are easy to operate l Hydraulic Tailstock with foot switchl Suitable for batch and mass production for grinding cylindrical workpieces
Drill Grinder
Features:
GH 20T 3ph 0310-0125
Specification GH 20T
Included as standard:
l Corundum cup grinding disc,Ø100x51Ø20mm
l Diamond cup grinding discØ100x 51 x Ø 20mm
Optional Attachments:Corundum K80 Fast working steel (HSS) 0310-7120Diamond K150 Carbide 0310-0129
l Universally deployable thanks to versatile pivoting andadjustment options
l Many pivoting and adjustment options for creating gravers(cylindrical, centric, tapered)
l For grinding stamps, twist drills, electrodes, lathe tools, centres.l High level of precision thanks to rugged machine body and
vibration-free driven precision grinding spindlel Easy handling and operationl Indexing head with 24 latching positionsl Adjustable dressing device
Technical data Electrical connection 400 V/3 Ph ~50Hz Motor output 370 W Speeds Grinding disc speed, diamond 5 000 rpm Grinding speed max. 35 m/s Motor speed 2 750 rpm Travel Tool holder travel 140 mm Tool holder fine adjustment 18 mm Longitudinal fine adjustment 6 mm Adjustable angle vertical/rear side 00 - 400 horizontal/conical grinding 00 - 1800 Negative angles 00 - 520 Latching setting angle of rotation 22* x 150 1800 Collet chuck holder Clamping range Ø 1- 12 mmClamping jaw type 385E (5C), DIN 6341 Dims LxWxH 350 x 450 x 340 mm Weight 45 kg
l Spring Collets 385E (5C) DIN 634137.5MM, L=89mm, 20Sizes Ø4/6/8/10/12mm
l Device for sharpening lathe tools
l Device for sharpening end mills
l Operating tool
l Device for sharpeningtwist drill bits
NEW
23 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Industrial Bench Grinders
Excel Grinders
Specicfication GU 15 GU 18 GU 20 GU 25 GU 30 Model
110v 1ph 0310-15051 0310-15101 0310-15151240v 1ph 0310-1505 0310-1510 0310-1515 415v 3ph 0310-1520 0310-1525 0310-1530Motor Power 450 W 450 W 600 W 1.5 kW 2.2 kWWheel Size (mm) Ø150x20xØ16 Ø175x25xØ32 Ø200x30xØ32 Ø250x40xØ32 Ø300x50xØ75 Speed 50Hz 2850 rpm 2850 rpm 2850 rpm 2850 rpm 1450rpmDims LxWxH (cm) 47 x 32 x 30 48 x 32 x 30 51 x 36 x 33 66 x 39 x 38 77 x 42 x 52Weight 11 Kg 13 Kg 19 Kg 33 Kg 83 KgExtraction Duct Ø34 Ø34 Ø34 Ø34 Ø35 / Ø50
SPARE WHEELS Spec.StockNo.
150mm K36 0310-7150 150mm K80 0310-7155 175mm K36 0310-7180 175mm K80 0310-7185 200mm K36 0310-7210 200mm K80 0310-7215 250mm K36 0310-7250 250mm K80 0310-7255 300mm K36 0310-7270300mm K80 0310-7275
GU 15, GU 18, GU 20, GU 25, GU 30
StandforGU 15 - 25LxWxH 32 x 27 x 82 cm 0310-7060
StandforGU 30LxWxH 50 x 42 x77 cm 0310-7119
NEW
NEW
l Industrial type lHousing made of aluminium casting l Balanced rotor with smooth runningl Spark protection on each grinding wheel l Solid adjustable tool restsl Vibration absorbing rubber feet l Two universal corundum grinding wheels
Features:
GU 30
24176 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Bench Grinders & Polishers
l Sealed Motorl Magnetic Switches with
No Volt Releasel Sanding Table can be
adjusted from 90° -180°l Adjust Roller to Track Beltl Contour Sandingl Sanding Table can be
adjusted 0°-90°.
Table Length 27”Belt LxW 6 x 89”Speed 5300 fpmMotor (240V 1ph 11⁄2 HP (2P)Weight 99 Kgs
Specification 80 B
Features
BIG BOY 80 B 1-553-200
Heavy Duty Belt Grinders 1phBigboy 80 B, MBSM 100-130, MBSM 75-200-1
6 x 89” Belt Fine Grit Pack of 10 1-553-900P6 x 89” Belt Medium Grit Pack of 10 1-553-910P6 x 89” Belt Coarse Grit Pack of 10 1-553-920P
Spare Belts Stock No.
MBSM 100-130 0392-1226
MBSM 75-200-1 0392-2070
100-130 75-200-1Grinding Width 100 mm 75 mm Belt Speed 19 m/s 29 m/sElectrics 230V 1Ph 50Hz 230V 1Ph 50 Hz Motor Power 50Hz 1.5 kW 3.0 kWDims of Grinding Belt 100 x 1220 mm 75 x 2000 mmContact Wheel dia. 130 mm 200 mm Suction Nozzle 2 x 75 mm 2 x 100 mmMachine Dims (LxWxH) 69 x 39 x 36 cm 107 x 34 x 95 cmMachine Weight 37 Kg 72 Kg
75x2000mm Belt 60 grain coarse 1-555-920P75x2000mm Belt 80 grain medium 1-555-910P75x2000mm Belt 100 grain fine 1-555-900P
SPARE BELTS FOR MBSM 75-200-1Pack of 10
100x1220mm Belt 40 grain 0372-6040100x1220mm Belt 60 grain 0372-6060100x1220mm Belt 80 grain 0372-6080100x1220mm Belt 120 grain 0372-6120
Pack of 10
Optional Stand0392-1227
NEW
MBSM MBSM Specification
SPARE BELTS FOR MBSM 100-130
25178 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
75 - 20 AS 150 - 20 ASGrinding Width 75 mm Belt Speed 34 m/sElectrics 400V 3Ph 50Hz 400V 3Ph 50Hz Motor Power 50Hz 3.5 kWDims of Grinding Belt 75 x 2000 mmContact Wheel dia. 200 mmSuction Nozzle 2 x 100 mmIntake Capacity 630 cub.mhDims (LxWxH) 103 x 50 x 100 cm Machine Weight 91 Kg
150 mm 34m/s
3.5 kW
150 x 2000 mm200 mm
2x100 mm630 cub.mh
103 x 60 x 100 cm114 Kg
MBSM 150-20 AS 0371-2151
MBSM 75-20 AS 0371-2076
2000x75mm Belt Fine 1-555-900P2000x75mm Belt Medium 1-555-910P2000x75mm Belt Coarse 1-555-920P
SPARE SANDING BELTS Pk 10
2000x150mm Belt Fine 1-555-950P2000x150mm Belt Medium 1-555-960P2000x150mm Belt Coarse 1-555-970P
SPARE SANDING BELTS Pk 10
l Metal belt grinders for grinding surfaces, edges, and for rounding l Powerful motors with vibration-freeaction to achieve the best possible grinding results l Protective screen folds away
l Grinding belt changed within seconds thanks to quick-release systeml With 2 extraction ports - one directly on the spark box and one on the rear rollerl Continuous surface grinding area l Easy adjustment of belt action thanks to adjustment screwl Features motor brake, adjustable working height, protective screen, angle stop and motor circuit breaker as
standard l Continuously variable grinding unit l With 2 integrated extraction units - one directly on the spark boxand one on the rear roller
Features
Heavy Duty Belt Grinders 3phwith intergrated extraction units
belt tensionlever
belt tracking adjustment
2 extraction ducts
NEW
MBSM MBSM Specification
26180 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
1-552-403
Heavy Duty Belt & Disc SandersBTS 51, BDG 69
l Pneumatic sanding belt tension manually adjustable lFine adjustment for parallel belt runl 2 sanding tables, swivelling via clamping lever l With sanding belt (80 grain) and sanding disc (80 grain) as standardl Powerful motor l With extraction port on spark trap as standard lSanding belt changed within seconds thanks to
simple operation lCan easily be fixed on the workbench
BTS 51
Pack of 10
1000 x 50 mm Belt Coarse 60 grain 0372-10061000 x 50 mm Belt Medium 80 grain 0372-10081000 x 50 mm Belt Fine 100 grain 0372-1010150 mm Disc Coarse 60 grain 0591-1506150 mm Disc Medium 80 grain 0591-1508150 mm Disc Fine 100 grain 0591-1510
Spare Belts/Discs
Features:50 x 1000 mm Belt, 150mm Disc 0370-0051 LIGHT DUTY
BDG 69 6x48” Belt, 9” Disc 1-552-350Features:l Heavy Duty l Linishing belts can be used in Vertical or Horizontal position lTable Tilts 45°l Mitre Gauge tilts L60° - R60° lHeavy duty 1100W 240V 1Ph motor lQuick Belt Change l Net Weight 54 Kgs
Specification BDG 69 Table Size 315x 170 mmTable Tilting 0 - 45°Belt Size 153 x 1220 (6 x 48")Belt Tilting 0 - 90°Belt Speed 348 m/min Disc Size 230 mm (9")Disc Speed 2100 rpm Motor 1100 W
Pack of 10 6x48" Belt Fine Grit
1-551-900P6x48" Belt Meduim Grit
1-552-910P6x48" Belt Coarse Grit
1-552-920P9" Dia. Disc Fine Grit
1-552-930P9" Dia. Disc Medium Grit
1-552-940P9" Dia. Disc Coarse Grit
1-552-950P
Stock No.
Professional Quality
Specification BTS 51Motor Power (230V.1Ph 50Hz) 750 WMotor Speed 2800 rpmBelt Speed 22 m/secGrinding Disc Dia. 150 mm Grinding Arm Inclination 50°Drive Wheel Dia. 152 x 50 mmContact Wheel Dia. 75 x 50 mm Grinding Belt 1000 x 50 mmGraphite Support Dims. 160 x 60 x 1.5 mmDims LxHxW (cm) 41 x 50 x 52 Weight 22 Kg
NEW
27 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Helical & Water Pipe Benders UB 11 0379-0011 , RB 12 0377-6012
Helical Bending Element
Specification UB 11
Square 5 x 5 mmFlat Materials 5 x 25 mmRound Materials Ø5 mmWeight 3 Kg
Max. Material Thickness
Separate holding handle for helical bending element UB 11 allows operation of the UB 11 also without the UB 10 on a commercially available vice
Fig. shows the scope of delivery UB10-280
Bending unit RB 12 for heating and water pipes up to G3/4"
l Ideal for on the roadl Easy assembly on a
commercially available vicel Cold bending up to an
angle of 180°l Partial bending
supportedl Adjustable bending
angle stopfor a high level ofrepetition accuracy
l Easy to use
Features
Specification RB 12 Inner Dia. for bend G 3/8" 102 mmInner Dia. for bend G 1/2" 108 mmInner Dia. for bend G 3/4" 112 mmWeight 22 Kg
UB 11
RB 12
NEW
NEW
28 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Bench Vices & Bending Rolls BV Series, ASBV Series RBM
ALL STEEL BENCH VICESl Steel Body for maximum strengthl Anvil back - useful for many jobsl Enclosed type Lead Screwl Designed to provide lasting service.
Model
JawWidthmm
Jaw Opening
mmStock
Number Weight
Kgs
Specification
ASBV 4 100 100 57 7.5 3-167-004ASBV 5 125 125 67 11 3-167-005ASBV 6 150 150 76 14.5 3-167-006ASBV 8 200 200 89 20.5 3-167-008
ThroatDepth mm
BENCH VICESl Semi-Steel body for maximum strengthl Anvil back - useful for many jobsl Enclosed Type Lead Screwl Designed to provide lasting service.
Specification
Model Jaw
Width mm
Jaw Open mm
Stock Number
Jaw Depthmm
WeightKgs
BV 3 75 75 55 7 3-165-200BV 4 100 100 65 12 3-165-300BV 5 125 125 70 20 3-165-400BV 6 150 155 90 30 3-165-500
Features
Features
l Steel rollersl Top roller folds out for easier removal of the workpiecel Asymmetric roller arrangement for convenient pre-bendingl Skewing side roller for conical bendingl Clamping &side roller with wire insert groovesl Roller drive via crank and gearl Particularly handy and thus suitable for working in cramped conditionsl Perfectly suited for fine work due to lean shaft thicknessl 3-roller plate rolling machine for all round parts
such as pipes, cylinders, etc.
FeaturesManual Plate Rolling Machine
Specification RBM 305
Max working length 305 mmMax sheet thickness 0.80 mmRoll Diameter 25 mmBending Dia. Min 40 mmDims LxWxH |(cm) 58 x 21 x 26Weight 14 Kg
0378-0112
Opt Stand 0378-0113
NEW
29238 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
l Press bench adustable by height in 8 stages with locking bolts.l With cylinder movement. l With pressure gauge for
reading off the compression.l Piston stroke alternatively by
hydraulic manual pump or pneumatic foot pedal.l Compressed air coupling for
operating presure 7.5 to 8.5 bar
Hydraulic Workshop Presses WPP 10 TE, WPP 20 E, WPP 30 E, WPP 50E, WPP 75 E
Hydraulic Workshop Presses WPP 60 HBK 0401-3060 WP 100 HBK, 0401-3100
WPP 160 HBK 0401-3160 WPP 200 HBK 0401-3200
l Equally suited to assembly and straightening work, workpiece testing, or pressing bearings & other componentsin or out l Ideal for technical workshops, repair shops and technical training institutions l With two piston feedspeeds and pressure control via throttle screw l Pressure gauge for pressure display l Heavy, welded machineframe made of steel sections to absorb the incident press force of the cylinder l The hydraulics work with greatprecision in both electric and manual mode l Adjustment of the cylinder via rack on hand wheell Heavy-duty and durable welded designed l Comprehensive range of accessories
Features:
Specification WPP 60 HBK WPP 100 HBK WPP 160 HBK WPP 200 HBKPower 60 t 100 t 160 t 200 tPress Speed 1.5 mm/s 1.5 mm/s 1.5 mm/s 1.2 mm/sFeed Speed 10 mm/s 10 mm/s 10 mm/s 10 mm/sMotor Power 1.5 kW 1.5 kW 1.5 kW 4.0 kWElectrical Connection 400V 3Ph 50H 400V 3Ph 50H 400V 3Ph 50H 400V 3Ph 50HzWeight 480 Kg 980 Kg 1480 Kg 2700 Kg
Dimensions WPP 60 100 160 200
A - Height 2290 2280 2450 2600B- Width without Pump 990 1290 1320 1900C - With with Pump 1350 1600 1950 2450D - Depth 650 850 1000 1100E - Clear Width 790 1030 1020 1500F - Clear Height 1000 1000 1020 1000G - Depth of hole frame 180 265 300 400H - Piston stroke 300 320 400 400I - Piston travel 450 550 550 800
HBK HBK HBK HBK
WPP 60 HBK WPP 100 HBK
Heavy Duty, hydraulic workshop presses, moving piston & two piston feed speeds
NEW
A
C
DBE
F
H
I
G
30 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Load bearing capacityTotal widthFork widthFork lengthLifting range Lifting heightSteering angleSteering roller Dia x WFork roller Dia x WDims LxWxH cmWeight Kgs
Specification PHW 2506 K PHW 2506 PHW 2506 L2.5 t
540 mm160 mm800 mm
85 - 200 mm115 mm
186º200 x 50 mm80 x 70 mm
119 x 54 x 12463
2.5 t540 mm160 mm1150 mm
85 - 200 mm115 mm
210º200 x 50 mm 80 x 70 mm
154 x 54 x 12369
2.5 t540 mm160 mm
1800 mm85 - 200 mm
115 mm186º
200 x 50 mm 80 x 70 mm
219 x 54 x 124107
Features All Models:
Pallet Trucks PHW 2506 K PHW 2506 PHW 2506 L0615-2507 0615-2506 0615-2508
l Robust fully hydraulic lifting and lowering device l Smooth-action hydraulic pump with hardchrome-plated piston and pressure relief valve l Loweing speed infinitely variable thanks to releasevalve and granular control l Highly stable, torsion-resistant monocogue design of frame and forks
l Ergonomically shaped drawbar, non-slip with additional plastic coating l Three functions operablevia one-hand lever (lifting, lowering,neutral position l Easy to move even heavy loads thanks to super
quiet aluminium steering rollers with solid rubber wheel treads and tandem fork rollers made of polyurethanel Precision ball bearings in all wheels and rollers
NEW
PHW 2506 L
PHW 2506
PHW 2506 K
800 mm
1150 mm
1800 mm
31248 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Planing & Thicknessing Machines
Features
Max.cut width (with stop)Max.cut width (w/o stop)Max. cutting height 90°Max. cutting height 45°Cutting speedSaw blade lengthSaw blade widthMax Width ThicknessTable LxW Table Height Table InclinationPower RatingOutputElec ConnectionExtraction port ØDims LxWxH cmWeight
Specification 125 mm228 mm90 mm50 mm
635 m/min1575 mm6.35 mm10 mm
0.35 mm300 x 300 mm
405 mm0-45°
0.3 kW0.17 kW
53 mm49 x 42 x 84
20 Kg
HBS 231-1145 mm245 mm152 mm 95 mm
400 / 800 m/min1826 mm10 mm
12.5 mm0.35 mm
360 x 320 mm935 mm
0-45°0.375 kW0.22 kW
230 V / 1PH /AC / 50 Hz100 mm
68 x 52 x 14434 Kg
225 mm305 mm165 mm105 mm
370 / 800 m/min2240 mm12.7 mm20 mm0.5 mm
480 x 3901000 mm
0-45°0.75 kW0.5 kW
100 mm78 x 60 x 160
51 Kg
HBS 261-2 HBS 321-2255 mm340 mm225 mm145 mm
370 / 800 m/min2560 mm12.7 mm25 mm0.5 mm
545 x 5151020 mm
0-45°1.1 kW0.8 kW
100 mm87 x 69 x 172
76 Kg
HBS 361-2
VerticalBandsaws-Woodworking HBS 231-1 1ph 0590-2423 HBS 261-2 1ph 0590-2426 HBS 321-2 1ph 0590-2432 HBS 361-2 1ph 0590-2436
l Ideal for demanding model makers and DIY enthusiasts. l Cast aluminium fly wheels
Included as standard:HBS 231-1l Saw band l Longitudinal stopl Mitre stop l LED lampl 3 roller saw band guide top & bottom l Pusher block
Saw Belts HBS 351-2
1575 x 6 x 0.36 mm 14 0516-00101575 x 6 x 0.5 mm 6 0516-00111575 x 10 x 0.5 mm 4 0516-0012
Spare Saw Blades HBS 231-1 TPI
1826 x 6 x 0.6 mm 14 0516-0020 1826 x 6 x 0.6 mm 6 0516-00211826 x 12 x 0.6 mm 4 0516-0022
2240 x 6 x 0.6 mm 6 0516-0030 2240 x 10 x 0.5 mm 6 0516-00312240 x 16 x 0.5 mm 4 0516-00322240 x 20 x 0.5 mm 4 0516-0033
HBS 321-2
2560 x 6 x 0.6 mm 6 0516-00402560 x 6 x 0.5 mm 6 0516-00412560 x 16 x 0.5 mm 4 0516-00422560 x 25 x 0.5 mm 4 0516-0043
HBS 361 -2
StockNumber
HBS 261-2
with special coating l Grey cast work table tilts up to 45° l Equipped with precision 3 roller saw band guides above and below the table l Aluminium longitudinal stop with quick release, precisely adjustable thanks to magnifying glass and millimetre scale (except HBS 231-1) l Two belt speeds adjustable (except HBS 231-1)
NEW
HBS 261-2, HBS 321-2,HBS 361-2l Saw bandl Longitudinal stop with
magnifying glass l Mitre stop l LED lampl Pusher block l Chassisl 3 roller saw band guide top & bottom
Included as standard:
32256 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Chop/Mitre Saws KGZ 3050 Vario 1ph 0570-1315
l Base plate & rotating platen made of die cast aluminium, compact, rugged & easy to transportat the same time l Additional latching positions in the rotating platen at 60° (right-hand only)
l With 31.6° latching position, tailored for cutting ceiling trims l With double angle and mitre as afactory standard l With laser projection on the workpiece for precise control of the cutting positionas a factory standard l Extension of workpiece mounting surface on both sides with folding stopsfor repetitive work l With chip catchment bag as a factory standard l Easy and fast saw blade change
l Granular angle adjustment l Adjustable and tall workpiece stops made of aluminiuml Screw clamp for safe workpiece fixing l With cutting depth limiter l Also suitable for cutting cornice profiles
Features
305x2.6x1.8x30mm, 60 teeth alt.teeth specially suited for panels 0526-0306305x2.6x1.8x30mm, 60 teeth for NF metals,plastic sections 0526-0310Universal workbench UWT 3200 0590-0020
Optional Accessories
Motor power (230V)Speed of saw bladeSaw bladeCutting cap. (HxW)At 0º incl./ 0º Mitre At -45º incl./ 0º MitreAt +45º incl./ 0º MitreAt 0º incl./ -45º MitreAt 0º incl./ +45º MitreDims (LxWxH) cmWeight
SpecificationKGZ30501.6 kW
2000 - 4000 rpm305x2.6x1.8x30 mm
100 x 305 mm64 x 305 mm44 x 305 mm100 x 215 mm100 x 215 mm60 x 80 x 71
23 Kg
NEW
33 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Edge thicknessEdge heightFeed speedPerformanceConnectionAdhesive tank capacityOperating temperature
Dims LxWxH (cm) Weight
Specification KAG 4 (SET) 0.4 - 3.0 mm
10.0 - 65.0 mm2 - 6 m / min
855 W230 V400 ml
Step 1 120ºC - 200ºCStep 2 80ºC - 155ºC
25 x 19 x 358.8 Kg
Featuresl With continuous temperature and feed speed controll Ideal for mobile use in workshops, on construction sites, at trade fairs, etc.l With digital temperature control and infinitely adjustable feed speedl For use with moulded parts and straight workpieces l Easy and fast toolingl Minimum inner radius of workpiece is 25 mm l The edges can be pre-glued for corner jointsl With molten adhesive reservoir l Short warm-up time - very good heat insulation
Edge Binder KAG 4 SET 0540-0041
Included as Standard
NEW
34260 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Edge Sander Belt & Disc Sanders BTS 151 1ph 0590-3151 BTS 250 1ph 0590-4250
Features
Stand BTS 250 0591-4250Angular stop BTS 250
0591-0814Reduction coupling 60/100 0514-2427
Optional Accessories
BTS 250Pictured with optional substructure
Sanding belt sizeDisc sizeTable sizeSpeedDims (LxWxH) cmInput power 50 HzSuction nozzle ØWeight
Specification
915 x 100 mm150 mm
160 x 226 mm2,980 rpm
46 x 36 x 28370 W / 230 V
63 mm17 Kg
1220 x 150 mm250 mm
360 x 200 mm1440 rpm
72 x 41 x 44800 W / 230V
63 mm47 Kg
BTS 151 BTS 250
1-551-900P1-551-910P1-551-920P1-551-930P1-551-940P1-551-950P
4x 36" Belt Fine Grit4x 36" Belt Medium Grit 4x 36" Belt Coarse Grit6" Ø Disc Fine Grit 6" Ø Disc Medium Grit 6" Ø Disc Course Grit
BTS 151 Spare Belts & Discs
Angular Stop
1-552-900P1-552-910P1-552-920P0591-25060591-25080591-2510
6x 48" Belt Fine Grit6x 48" Belt Medium Grit 6x 48" Belt Coarse Grit10" Ø Disc Coarse Grit 10" Ø Disc Medium Grit10" Ø Disc Fine Grit
BTS 250 Spare Belts & Discs
l Appropiate for lots of materials and shapesl Twist free machine housing made of steel
grey cast iron constructionl Sanding beltunit infinitely slewable from
0º to 90º, it can be used horizontally and verticallyl Double controlled, slewable working
table infinitely variable from 0º to 45ºl Rapid and simple replacement
of the sanding belt with the quick action device,tools are not required for the assembly
l Integrated suck off nozzle to beconnected to an external suction unit
l Includes sanding belts and sanding wheel
NEW
35 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Wood Chip Extractions SAA 902 SAA 2003 SAA 3003
l For milling, planing and saw chips. (not suitable for dust)l Metal blade-wheel impeller for great
extraction performancel Excellent value for money
Features
Air volume flow 1200 m/h 2.553 m/h 3,910 m/hNozzle inlet Ø 100 mm 125 mm 150 mmNozzle outlet Ø 1 x 100 mm 2 x 100 mm 3 x 100 mmPower connection 230V.1Ph. 50Hz 400V.3Ph. 50Hz 400V.3Ph. 50Hz Motor power 550 W 1,500 W 2,200 WDims LxWxH (cm) 90 x 50 x 155 100 x 75 x 200 145 x 80 x 200Weight 19 Kg 47 Kg 59 Kg
Specification SAA902 SAA2003 SAA3003
Filter bag SAA 902 0593-0901Filter bag SAA 2003 0593-2203Filter bag SAA 3003 0593-2303Chip bag SAA 902 (10 Pcs) 0593-0902Chip bag SAA 2003 & 3003
(10 Pcs) 0512-3055
Optional Accessories
Note:You will need to order the polyurethane flexible hose to connect with the extractor. These pipes are available in 2.5, 5.0, 7.5 or in 10m lengths.
Reduction Coupling 100 / 60 mm maybe required
Floor cleaning kit1 0514-8100Reduc. coupling 100/60mm 0514-8100Auto start up ALA 2 0512-1503Auto start up ALA 10 0512-1504
Accessories Ø 40 mm 0514-2500-2.5Ø 60 mm 0514-2501-2.5Ø 80 mm 0514-2502-2.5Ø 100 mm 0514-2502-2.5Ø 120 mm 0514-2504-2.5
Polyurethanceflexhose
1ph 0592-3902 3ph 0592-2203 3ph 0592-2303
SAA 902
SAA 2003
SAA 3003
NEW
Why Not Pay Us A Visit
We're Only 3 Minutes From Junction 3, Off The M6
Colliery Lane, Exhall, Coventry. CV7 9NW
Terms and Conditions
Terms and Conditions