Data Acquisition and Processing Report · 1 Data Acquisition & Processing Report
New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control...
-
Upload
icp-das-usa-inc -
Category
Engineering
-
view
490 -
download
3
description
Transcript of New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control...
New Product Presentation
Maria Lemone, Sales ManagerICP DAS USA, Inc.
[email protected] x105www.icpdas-usa.com
Making Data Acquisition Simple
New Product Presentation for Wes Moore
DGW-521 DALI Lighting Control Gateways
Features:• Conversion between RS-485/RS-232/USB and DALI
Interfaces• Easy Deployment: The ID Code can be written by the
RS-485 Interface• Built-in DALI Power can be enabled or disabled with
a Switch• 1500 VDC Isolation• ±4 ESD Protection for the RS-232/485/USB Data Line• ±4 kV EFT Protection and ±2 kV Surge Protection for
Power Line• DIN-Rail Mountable• Wide Operating Temperature Range: -25 °C ~ +75 °C
Making Data Acquisition Simple
New Product Presentation for Wes Moore
DGW-521 Application
Making Data Acquisition Simple
New Product Presentation for Wes Moore
Communication Distances:• DALI:• RS-232:• USB:
ET-7200 Dual Port Ethernet I/OFeatures:• Built-in Web Server• Web HMI• Support for both Modbus TCP and Modbus UDP Protocols• Communication Security• 2-port Ethernet Switch for Daisy-Chain Topology• Dual Watchdog• Wide Operating Temperature Range: -25 ~ +75°C• I/O Pair Connection• Built-in I/O
Making Data Acquisition Simple
New Product Presentation for Wes Moore
ET-7200 SeriesET-7202 Ethernet I/O Module with 2-port Ethernet Switch, with 3-ch Analog Input, 6-ch Digital Input, 3-ch Relay, communicates over Modbus TCP, supports operating temperatures from -25 ~ +75°C
ET-7215 Ethernet I/O Module with 7-ch RTD Inputs, communicates over Modbus TCP, supports operating temperatures from -25 ~ +75°C
ET-7217 Ethernet I/O Module with 8-ch Analog Input, 4-ch Digital Output
ET-7217-10 Ethernet I/O Module with 2-port Ethernet Switch, with 10/20-ch Analog Input
ET-7226 Ethernet I/O Module with 8-ch Analog Input, 4-ch Digital Output
ET-7242 Ethernet I/O Module with 2-port Ethernet Switch, with 6-ch Analog Input, 2-ch Analog Output, 2-ch Digital Input, 2-ch Digital Output
ET-7251 Ethernet I/O Module with 2 Ethernet Switch Ports, with 16-ch Digital Input
ET-7252 Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch Digital Input, 8-ch Digital Output
ET-7253 Ethernet I/O Module with 2-port Ethernet Switch, with 16-ch Digital Input
ET-7255 Ethernet I/O Module with 8-ch Digital Input, 8-ch Digital Output
ET-7260 Ethernet I/O Module with 2 Ethernet Switch Ports, with 6-ch Relay Output and 6-ch Digital Input
ET-7267 Ethernet I/O Module with 8-ch Relay
Making Data Acquisition Simple
New Product Presentation for Wes Moore
WF-2000 Wi-Fi I/O ModulesFeatures:• Support sink type digital outputs• Support sink / source type digital inputs• Compatible with IEEE 802.11b/g standards• Support infrastructure and ad hoc modes for wireless
networks• Support WEP, WPA and WPA2 wireless encryption• Support Modbus/TCP and UDP protocols• Support pair connection mode• Support DO power on value & safe value mechanism• Built-in Watchdog
Number of nodes that can be in one network:
Communication Protocols: Modbus TCP, UDPCommunication Distance:
Making Data Acquisition Simple
New Product Presentation for Wes Moore
Applications
Making Data Acquisition Simple
WF-2000 SeriesWF-2017
8-channel Differential/16-channel Single-Ended Analog Input Wi-Fi I/O Module. 4 kV ESD Protection. Built-in Watchdog (RoHS)
WF-2019 10 Channel Universal Analog input
module with thermocouple, voltage and current input types. Communicable over Modbus TCP and Wi-Fi networks. Supports operating temperatures between -25C ~ +75C
WF-2055
Wi-Fi I/O Module with 8-channel Isolated Digital Input and 8-channel Sink Type Isolated Digital Output, communicable over Modbus TCP, has a DIN-rail mount, supports operating temperatures from -25C ~ +75C
WF-2060
Wi-Fi I/O Module with 6-channel Isolated Digital Input and 6-channel Relay Output. Supports Modbus TCP protocol and operating temperatures from -25 ~ +75 ℃ ℃
Making Data Acquisition Simple
WF-2000 Series
EIP-2000 Ethernet/IP I/O ModulesFeatures:• Transfer protocol: EtherNet/IP• Powerful 32-bit MCU handles efficient network
traffic• 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-
negotiating, auto MDI/MDIX, LED Indicators)• Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and
TFTP protocols• Easy firmware update via Ethernet• Removable terminal block connector• LED display to indicate the I/O status• Analog Input• Internal resistors (125Ω) selectable in Differential
mode• RoHS compliant
Making Data Acquisition Simple
EIP-2017Number of nodes that can be in one network:
Applications
Making Data Acquisition Simple
WF-2000 SeriesEIP-2017
Isolated 8-ch DIFF / 16-ch SE Analog Input EtherNet/IP module
EIP-2019
Isolated 8-ch Thermocouple Analog Input EtherNet/IP module
EIP-2042
Isolated 16 channel DO EtherNet/IP Module, supports operating temperatures from -25°C ~ +75°C
EIP-2051
Isolated 16 channel DI EtherNet/IP Module, supports operating temperatures from -25°C ~ +75°C
EIP-2055
Isolated 8 channel DI and 8 channel DO EtherNet/IP I/O module, supports operating temperatures from -25°C ~ +75°C
EIP-2060
Isolated 6 channel DI and 6 channel Relay Output EtherNet/IP I/O module, supports operating temperatures from -25°C ~ +75°C
Making Data Acquisition Simple
EIP-2000 Series
PM-3000 Power Meters
Features:• True RMS Power Measurements• Energy Analysis for 1P2W, 1P4W• Current Measurements Up to 200 A with Different CT Ratio• Voltage Measurements Up to 300 V• Clip-on CT for Easy Installation• W Accuracy Better than 1% (PF=1)• Supports RS-485, Ethernet or CAN bus/CANopen Interface• Supports Modbus RTU, Modbus TCP or CAN Protocol• Supports 2 Power Relay Output (Form A)• Supports PoE (IEEE 802.3af, Class 1)
Making Data Acquisition Simple
New Product Presentation for Wes Moore
PMC-5151 Power Meter ConcentratorsFeatures:• Built-in Web Server: Set up parameters and view data via web browser• View Real-time trend or historical trend• Generate Power Data Reports ( daily report and monthly reports )• Built-in MicroSD card slot for Data Storage• Send Power Meter Data files based on a Schedule via FTP • Send Email & SMS alarm and notification messages ( SMS messages need GSM
Modems like GTM-201-USB to get sent) • Web based HMI Tools for easy HMI development• Modbus TCP/RTU Slave functions allow seamless integration with SCADA
software• PMC Data Server allows importing of power data from database systems• Built-in IF-THEN-ELSE logic engine can be used to turn devices on or off based
on configured power usage • Scheduling function for operations of I/O modules (devices)• Support Modbus I/O modules that enable real-time control and management of the devices
Making Data Acquisition Simple
New Product Presentation for Wes Moore
Application
Making Data Acquisition Simple
New Product Presentation for Wes Moore
TPD & VPD HMI PLC Features:• A tiny touch screen controller HMI designed for building and home automation. • Equipped with a high resolution TFT color touch screen• Fits in regular electrical wall-mount outlets• Excellent C/P ratio (cost/performance)• High resolution color touch screen• PoE, Power over Ethernet• Free development tool, HMIWorks
Features:• Excellent Cost/Performance ratio• High-resolution color touch screen• RS-485 (including Self-Tuner)• RTC (Real Time Clock)• Speaker• WYSIWYG (What You See Is What You Get) GUI design
TPD-430
Making Data Acquisition Simple
TPD-283/U
VPD-130
• 3.5” Touch HMI device• RS-232/RS-485 port• USB port• Real Time Clock and DIN
Rail Mount
New Product Presentation for Wes Moore
HMIWorks Development Software
• WYSIWYG Intuitive Design
• Built-in and Extensible Graphics Library
Making Data Acquisition Simple
New Product Presentation for Wes Moore
• C Language and Ladder Diagram Programming
• Wide range of Objects and Tools Shorten Development Time
Applications
Making Data Acquisition Simple
New Product Presentation for Wes Moore
GT-540 Device Servers
Making Data Acquisition Simple
GT-540
Features:• Automatic/continuous GPRS Link Management• Support Modbus RTU protocol to connect to Max 3
Modbus RTU devices via RS-485 port• Support M2M OPC server for SCADA system• Easy-to-use API tool for users to develop their
applications by various program development tools• Be the GPRS I/O devices• Support data transferring by E-mail• Local I/O linkage function to make the simple local
control• Support 3.7V Li-ion Battery backup• Power supply 10 ~ 30 VDC
New Product Presentation for Wes Moore
GT-540 Application
Making Data Acquisition Simple
New Product Presentation for Wes Moore
BNET-5310 Multi-Function BACnet/IP with I/O
Features:• 4 AI channels, 2 AO channel, 3 DI channels and 3 DO
channels.• built-in web server• Protocol: BACnet/IP
Applications:
Making Data Acquisition Simple
New Product Presentation for Wes Moore