New Nor Fab Cut Pro Vintage Tech Data Proof
2
CUTPRO TM Vintage Cut resistant garments for workers in high mechanical risk areas require specially engineered fabrics designed to protect without compromising comfort and appearance. NorFab’s new CUTPRO™ Vintage line of woven fabrics with Twaron ® Premium yarn provides high levels of cut and puncture resistance with an appearance reminiscent of vintage workwear. CUTPRO™ Vintage combines the strength, high thermal capability, cut resistance, and durability of Teijin Twaron ® with the hardness of stainless steel. The unique composition of CUTPRO™ Vintage provides outstanding protection against hazards posed by sharp objects and revolving or reciprocating blades. Garments made with CUTPRO TM Vintage fabrics provide: • ANSI/ISEA 105-2011 - Level 4 Cut Protection - Level 3 Puncture Protection - Level 2 Abrasion Resistance • 100% inherent flame resistance that will never wash out or wear out • Unique visual appearance Sheet-metal handling • Glass handling • Automotive assembly Fabrics for industrial cut protective garments Cut resistant garments for workers in high mechanical risk areas require specially engineered fabrics designed to protect without compromising comfort and appearance.
-
Upload
david-ducos -
Category
Documents
-
view
131 -
download
3
Transcript of New Nor Fab Cut Pro Vintage Tech Data Proof
CUTPROTM
VintageCut resistant garments for workers in highmechanical risk areas require specially engineered fabrics designed to protectwithout compromising comfort and appearance. NorFab’s new CUTPRO™ Vintage line of woven fabrics with Twaron®
Premium yarn provides high levels of cut and puncture resistance with an appearance reminiscent of vintage workwear. CUTPRO™ Vintage combinesthe strength, high thermal capability, cut resistance, and durability of Teijin Twaron®
with the hardness of stainless steel. Theunique composition of CUTPRO™ Vintageprovides outstanding protection againsthazards posed by sharp objects and revolving or reciprocating blades.
Garments made with CUTPROTM
Vintage fabrics provide:
• ANSI/ISEA 105-2011- Level 4 Cut Protection- Level 3 Puncture Protection- Level 2 Abrasion Resistance
• 100% inherent flame resistance that will never wash out or wear out
• Unique visual appearance
Sheet-metal handling • Glass handling • Automotive assembly
Fabrics for industrial cut protective garments
Cut resistant garments for workersin high mechanical risk areas require specially engineered fabrics designed toprotect without compromising comfortand appearance.
1310 Stanbridge Street,Box 830, Norristown, PA 19404-0830 U.S.A.
Tel: 610-275-7270 • 800-441-9680 • Fax: 610-277-6106Email: [email protected] • www.norfab.com
CUTPROTM Vintage Specifi cations
Fabric Style 10TT366
Fiber Blend Twaron®/Stainless Steel Wire
Color Yellow with stripe
Weave Twill
Weight oz./yd.² 9.5 +/- 7%
Fabric Thickness, inches 0.026 +/- .005
Tensile Strength 500 x 400ASTM D5034 (Grab) (W&F) lbs.
Cut Performance Test 3129ASTM 1790-05, CPPT (g.)
Cut Resistance Level 4ANSI/ISEA 105-2011
Puncture Resistance Test 83EN388 (N.)
Puncture Resistance Level 3ANSI/ISEA 105-2011
Abrasion Resistance Test 600 CyclesASTM D3884-09 (Taber; H18 wheel; 500 g. wt.)
Abrasion Resistance Level 2ANSI/ISEA 105-2011
All data intended as general information and no warranties, guarantees, or claims of fitness for use are expressed or implied by NOR*FAB Corp.
09/11
Sheet-metal handling • Glass handling • Automotive assembly
Fabrics for industrial cut protective garments
