UG license installation error solution

If u have question?

Licence Server not Found.

License server not started yet.

UG FLEXlm Error.

UG Installation error.

UG license installation error.

Unigraphics initialization error.

Then u reached at right place, here is the solution for these errors........if in doubt please feel free to ask....

copy license file in your installation directory.

C:\Program Files\UGS\UGSLicensing\

right click on My Computer ->Properties-> advance tab -> environment variables.click on new tab

in variable name write ------UGII_LICENSE_FILE

in variable values write HTML clipboard-----27000@COMPUTER

then open your lmtools.exe from licensing tool. then

1. click on configure using services.

2. then click on menu: start/stop/reread

3. then stop running server

4. then again click on service/license file menu

5 select configuration using license file.

6. click on browse and select the file copied lic file

C:\Program Files\UGS\UGSLicensing\nx4.lic

7. then again click on configuration using services.

8. click on start/stop/reread menu

9. click on start server.

its done.

If facing problem in downloading anything try this.......

Internet Download Manager

Posted by CAD Blogger

Email This BlogThis! Share to Twitter Share to Facebook Share to Google Buzz

51 comments:

Anonymous said...

hi,maybe you could help me'I tried to install patran-nastran 2005.when I ipconfig my computer, I get computername, ethernet address and IP.I have tried to edit licence.dat as below:

SERVER 001921e538de ANY 1700DAEMON MSC C:\flexlm\msc.exeFEATURE ABS MSC 2004.0999 31-dec-2019 99 C7F4CF558D56 ISSUER=ROR \SN=1272467-3A3E3AF6FCE2C85F8742FEATURE ACIS MSC 2004.0999 31-dec-2019 99 F06B09344A45 ISSUER=ROR \SN=1072400-8B72E41C49D5B2B25746FEATURE ACIS_NAME MSC 2004.0999 31-dec-2019 99 78D7DB209BCA \ISSUER=ROR SN=1296724-FC8DA9FD8E899967E16D.....

where 001921e538de is my Ethernet address it keeps telling me

"Your request to run MSC.Patran has been denied. Server node is down or not responding"

though it says "Server Start Successful" when I start it in lmtools.

with computer name insteat of Eth, address it says that license.dat is wrong. so, what should I put as hostname?could you help me?thank you.

July 31, 2008 5:51 AM

Anonymous said...

"SERVER ComputerName ANY 1700@ComputerName" worked. thank you.

August 1, 2008 4:08 AM

Anonymous said...

Hi.I hope you can help me. I installed NX4 and even tried NX5, but neither of them will work. I have edited the licens as followed in NX5:

SERVER monster ID=20070424 28000VENDOR ugslmd

then I start the lmtools and go using the licensfile, but when i then go to the tab, start/stop/reread, lmtools crashes. And the log file in UGSLicensing i saying the it could not open the port lstet in the licensfile.

So I realy hope you can help me.I am using XP PRO SP3.

September 6, 2008 3:21 PM

Anonymous said...

Hi, me again, I just want to tell that I am dualbooting with vista on a second harddrive. Dont know if this has anyting to say.

September 6, 2008 3:31 PM

ChanderPal said...

Hi.Anonymous......

I was out of station from last 4 days,so here is solution for ur problem....

u r using ur lic. file like this

SERVER monster ID=20070424 28000VENDOR ugslmd

reinstall lic. server and use the lic. file during installation.

before installation edit lic. file like this.....

SERVER ComputerName ANY 17000@ComputerName

if u don't know how to find out computer name thenfor computer name and other details visit my Computer Host ID post.....

September 10, 2008 12:23 AM

Anonymous said...

I have tried to install NX6 with changed licenced file:

SERVER ComputerName ANY 17000@ComputerName

Also I have put system variables.

When I want to run the LMTOOLS using licence file I see in the ugslicencing.log following error:

14:33:16 (lmgrd) The license server manager has found no vendor daemons to start14:33:16 (lmgrd) (There are no VENDOR (or DAEMON) lines in the license file),lmgrd exiting.

October 23, 2008 6:09 PM

Master-Mind said...

hi anonymous u are trying to install UG NX6.first of all port value is 27000 not 17000......

here the port value is changed from 27000 to 28000 in UG NX5 and NX6.

u can check my this post for NX5 & NX6

http://cadhelpcenter.blogspot.com/2008/10/ug-license-server-error-in-ug-nx5-and.html

and all of u please leave ur name.....

and avoid anonymous ....so i can leave solution for that particular friend....

have a nice day......

October 24, 2008 10:43 PM

RoadRunner said...

HiI am trying to install NX 4.0 on a Win 2008 Std Server and I can't. When it reaches the part with "starting services" I get an error saying that the licence server can't be started and "Verify that you have sufficient privileges to start system services". I am logged as administrator and in Local Security Policy -> Local

Policies -> User Rights Assignement I have set up the admin account to be able to do almost anything (except the 4 lines that start with deny).

November 7, 2008 2:01 PM

Anonymous said...

i have installed UG NX6 but when i start , geting these error.even i set environment variable but still have these problem. please help me

NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVERto be configured properly.it can either be set to the value port@hostname of theNX license server or it can be set to point directly to a license file.by default it will be of the form 28000@servername.

regardspraveen

December 30, 2008 6:24 PM

Chander Pal said...

Hi Anonymous,

check port value in your lic. file and environment variable the first 2 lines should be like this.

SERVER host ID=20080618 28000@hostVENDOR ugslmd

here host means your computer name.

have a nice day.

December 31, 2008 3:17 AM

Anonymous said...

HAPPY NEW YEAR MASTERMINDplease help me.

I REMOVED UG NX6 AND REINSTALLED LISENCE SERVER AND NX 6. BUT STILL FACING TROUBLE. NOW ERROR SHOWING AS BELOW - "NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

please help me and advice how to installed. if possible please mail me complete installation step. my mail id - praveen_roy@hotmail.com

regardspraveen

December 31, 2008 5:55 PM

sky said...

hi

please help me. i am again facing problem. cant abt le to run UG NX6.

in lic file i changed first two lines as below - SERVER this_host ID=20080618 28000@praveenroyVENDOR ugslmdpraveen roy is my computer name. after that i installed liscense server then installed NX 6.In environmental variable -have set VARIABLE NAME - UGII_LICENSE_FILEVARIABLE VALUE -28000@praveenroy.but still getting error message as below -"NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

January 5, 2009 1:13 PM

Chander Pal said...

Hi SKY,

in lic file u have changed first two lines as below -SERVER this_host ID=20080618 28000@praveenroyVENDOR ugslmdpraveen roy is my computer name.

lets change them with this.

SERVER praveenroy ID=20080618 28000@praveenroyVENDOR ugslmd

and enjoy.

have a nice day.

January 6, 2009 3:04 AM

sky said...

hi

i changed in lic file as your instruction but still getting error message -"NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

Please Help me. i want to run NX6 in my system.

January 6, 2009 5:33 PM

sky said...

Thnak you sir very much . now NX6 working. i had made some mistake. thanku for helping me.

January 6, 2009 6:12 PM

pahuljot said...

i have installed UG NX6 with the following lines in license file

SERVER ekco ID=20080618 28000@ekcoVENDOR ugslmdekco is my computer name

but still getting the message:

NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVERto be configured properly.it can either be set to the value port@hostname of theNX license server or it can be set to point directly to a license file.by default it will be of the form 28000@servername.

I have checked the log file, it gives the message:-

pid 1260The TCP port number in the license, 28000, is already in use.Possible causes: 1) The license server manager (lmgrd) is already running for this license.2) The OS has not "cleared" this port since lmgrd died.

3) Another process is using this port number (unlikely).Solutions:1) Make sure lmgrd and all vendor daemons for this license are not running.2) You may have to wait for the OS to clear this port.(lmgrd) Retrying for about 5 more minutes(lmgrd) Still trying... (lmgrd) Still trying... (lmgrd) Still trying... (lmgrd) Failed to open the TCP port number in the license.

Please help!!!!

January 15, 2009 7:15 PM

Chander Pal said...

Hi pahuljot,

Check my new post regarding port setting for UG.

Have a nice day.

January 16, 2009 9:19 PM

Nilay said...

I trying to install nx5 .i have followed all the steps including setting environment variables but still it shows error set to wrong host or lic server not found. in licensing log file it states21:14:36 (lmgrd) pid 138021:14:36 (lmgrd) Failed to open the TCP port number in the license.i am installing UG in win xp.

please help to solve this.

ThanksNilay

January 26, 2009 1:01 AM

Jesus Ernesto said...

hi, can u help me install nx5 please? so i edit lic. like this: SERVER Laptop ID=20070424 28000

VENDOR ugslmd

Laptop is my computer name. so i install ugs license. then i try to install nx5 but when it says write your hostname or something like that, i write:28000@Laptop

and then i press next and it says server license could not be found. so what am i doing wrong?

February 5, 2009 9:04 AM

Chander Pal said...

Hi Jesus Ernesto,

please describe your issue clearly, because i have already posted solution related to your problem.

February 5, 2009 10:43 PM

Jesus Ernesto said...

hi chander, this is what i've done. first i installed UGS licesing and the license file that i used said this:SERVER Laptop ID=20070424 28000VENDOR ugslmd

Laptop is my computer name. so i installed ugs license with no problem. then i try to install nx5, when it says write your hostname or something like that, i write:28000@Laptop

and then i press next and a message appears saying that server license could not be found. is that normal?

i've already done this http://cadhelpcenter.blogspot.com/2008/07/ug-license-installation-error-solution.html

this is what happened after i restarted my laptop. i tried to open NX5 and it said something about nx license error: unknown error code.

then i went to where all the bundles are and added one and tried again to open nx5 but still that same unknown error message appeared. can u please help me?

February 6, 2009 12:40 AM

Krishan said...

Hello,

First of all thanks in advance for any help you are able to offer me. I've read through every page on your blog regarding installing NX5, and I cannot seem to get it working.

The first three lines of my license file read:

SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmdDAEMON uglmd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\uglmd.exe"

where 'KrishanENGPC' is my computer name.

I have the server running in lmtools, and I also have all of the settings under the 'Config Services' tab exactly as you have them on your blog page.

I also have the environment variable running as;

Variable name: UGS_LICENSE_SERVERVariable value: 28000@KrishanENGPC

The error message I receive now is:

Initialization error-NX License Error: The desired vendor daemon is down [-97]

please help, thanks!

February 9, 2009 8:15 AM

Chander Pal said...

Hi krishan,

here u made error in third line of your lic. file.Because their is not any file in UG NX 6 in the provided path like"C:\Program Files\EDS\License Servers\UGNXFLEXlm\uglmd.exe"

so correct your license file like this:

SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmd

DAEMON ugslmd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\ugslmd.exe"

if problem not solved then change like this:

SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmdDAEMON lmgrd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\lmgrd.exe"

hope that your problem will solve.

February 9, 2009 10:26 PM

madmanmau said...

Hi Chander Pal!I'll hope you can help me.....I installed ansys 10.0 without problems, then I installed UGS5...without problems too.Somehow UGS interfered with the license of ansys and now the ansys license manager wont start up. When I try to wizard the licence file an error displays that it can't find the correct path.When I try to make changes inside lmtool, im not able to do it.I tryed to instal and unninstall both programs several times in order to reboot every registry and the same error keeps poping out. I also tryed cleaning the entire windows registry fromo both ugs and ansys entries, I manage to do it but when I re-install ansys the same error comes out.I installed both programs in several computers, only one has this problem....dont now what else I can do.Hope you can help me!!greetings.

February 11, 2009 8:04 PM

Chander Pal said...

Hi madmanmau,

Dear first of all there is not any chance of interfering of two licenses (UG+Ansys).

this all is because of any other error either of your pc or may be any software.

first of all check that the ports used in UG and Ansys are only used by the respected programs.

and then check that both of the license servers are running properly or not?

here the good thing is that the license configuration and port setting and other procedures are same in both software.

so you please read the releted posts and then reconfigure or reinstall both licenses again.

hope that your problem will be solve..........if not then write back here.....

have a nice day.

February 12, 2009 9:38 PM

madmanmau said...

Thanks Chander Pal! That must be be the problem.......how should I enter the new variable?

in variable name write ------ANSYS_LICENSE_FILE

in variable values write -----1055@COMPUTER Name

I'm using ansys 10.0, 1055 is the number entered in the license. Also there are already this variables:

ANSYS_SYSDIRIntel

ANSYS100_DIRC:\Archivos de programa\Ansys Inc\v100\ANSYS

ANSYSLIC_DIRC:\Archivos de programa\Ansys Inc\Shared Files\Licensing

CADOE_DOCDIR100C:\Archivos de programa\Ansys Inc\v100\CommonFiles\help\en-us\solviewer

CADOE_LIBDIR100C:\Archivos de programa\Ansys Inc\v100\CommonFiles\Language\en-us

Should I modify any of them instead? or exactly how do I enter the new one?

Thanks Again Chander!!

February 17, 2009 2:13 AM

CHAI said...

Hi, i am also facing the problem same as sky. Anyone can help me? Thanks.

February 18, 2009 4:45 AM

Davide said...

Hello and thanks in advance for your time.I've got the same error message as SKY (and CHAI):"NX License Error: Invalid (Inconsistent) license key or signature.The license key/signature and data for the feature do not match"

I changed the license file in the way you indicated:SERVER asus1 ID=20080618 28000@asus1VENDOR ugslmd

(asus1 is my computer name).

And the variables have been setted as you say.

Any further ideas, please? Thanks a lot, Davide

February 26, 2009 2:50 AM

Krishan said...

Hey ChanderPal

First of all, thanks again for trying to help, however that has not rectified the situation.

There is no such directory as C:\Program Files\EDS\... on my computer.

Rather, the files ugslmd.exe and lmgrd.exe are located in a folder called C:\Program Files\UGS\UGSLicensing

This same folder has my ugs1.lic file.

Right now the first three lines of my license file look like this:

SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmdDAEMON lmgrd "C:\Program Files\UGS\UGSLicensing\lmgrd.exe"

I also tried to use the ugslmd.exe file, but it has also not worked. when I use the "Perform Status Enquiry" tool in LMTOOLS I get the following:

--------Status--------Flexible License Manager status on Tue 3/3/2009 19:00

[Detecting lmgrd processes...]License server status: 28000@KrishanENGPCLicense file(s) on KrishanENGPC: C:\Program Files\UGS\UGSLicensing\ugs1.lic:

KrishanENGPC: license server UP (MASTER) v10.8

Vendor daemon status (on KrishanENGPC):

ugslmd: For further information, refer to the FLEXnet Licensing End User Guide,available at "www.macrovision.com".lmgrd: For further information, refer to the FLEXnet Licensing End User Guide,available at "www.macrovision.com".

Feature usage info:

Users of server_id: Cannot get users of server_id: No such feature exists.Feature: server_idLicense path: 28000@KrishanENGPCFLEXnet Licensing error:-5,222

and the same error (-5,222) continues for each feature.

Any ideas? Thanks again

- Krishan

March 4, 2009 5:32 AM

Anonymous said...

HI ALL!!This solution dont work for me.I use Nx6 soo long but now i have to format my computer... and i cant run Nx6...

"NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

before format computer everthing is good..

Solutions for this??

Best regards

May 6, 2009 3:25 AM

rakshin said...

hey please help me out , i have installed ansys 10 and iam not able to run it, some license problem can u please give step by step procedure for cracking this....please urgent

May 23, 2009 12:11 PM

Anonymous said...

hi this is naga , iam also having the same problems with ansys 10, the error its showing is

Product : ANSYS Multiphysics (feature 'ane3fl')checkout failed for the above productFLEXIM error message :no such feature exists . (-5,414)

server/license files searched :1055@__________

please help me out soon sir!!!

May 23, 2009 12:33 PM

Anonymous said...

hey i forgot to mention that i have followed the instructions u mentioned and it showed server start sucessful !!but still the above problems is existing naga

May 23, 2009 12:38 PM

stjohn said...

Hi Guys,does anyone have this version of NX6 working on vista? I have followed the correct install procedure and when I check with lmtools everything appears to be in order but when I start up NX6 I get the

toolbar icon and nothing else, it just appears to hang.

The strange thing is that at first I was also using NX5 (I wanted to upgrade) and did not read all the NX6 install instructions. I simply installed it and was using the NX5 license file. It worked at first but when I rebooted stopped working...

With regards to another users posting I do not think the install will work if you also have solid works on the box. There is a flex license manager conflict. You can check this via lmtools.

many thanks!

July 1, 2009 9:29 PM

balaji said...

hi,maybe youcould help mei tried to install NX5 in my systemafter installing when i tried to open it says NX License Error: Unknown error codeIn license file i have edited like thisServer (Host name) ID=20070424 28000For Host name I have given my Computers Host nameCould you help me?

July 13, 2009 1:42 PM

Anonymous said...

Can anyone send UGS NX 4.0 Licence file...

August 8, 2009 3:13 PM

CAD Help Center said...

Hi Anonymous,I think you to contact to Siemensfor license.you have to buy one for yourself.for your info you can contact here if you are in India near NCR:

Siemens PLM Software

Tower D, 16th Floor,

Global Business Park,

Gurgaon - 122 002

Haryana,India.Board : +91 (124) 409-2244

Direct : +91 (124) 409-2288Fax : +91 (124) 409-2211 Hotline: 1800-102-4822

www.siemens.com/plm

Have a nice day.

August 8, 2009 11:27 PM

Anonymous said...

Hi Sir,

Ive got problem when Install NX6.. I tried follow your instruction including check the comment. 1. Variable name: UGS_LICENSE_SERVERVariable value: 28000@ricky(Ricky is my host name)2. SERVER ricky ID=00163640FD2E 28000@rickyVENDOR ugslmd3. Run the lmstoolsFirst steps, you said start/stop/reread. -> I see a message unable run the server (I guess this is the problem)Second steps, after locate the copy of the license, I run again the start Server,the message said server run successfull.4. But, I open again NX6, it still won't run.

The problem still exist :"NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE UGS_LICENSE_SERVERto be configured properly.it can either be set to the value port@hostname of theNX license server or it can be set to point directly to a license file.by default it will be of the form 28000@servername."

Can you help me sir, because i need it for my bachelor scription??Thanxs be4 sir..

Best Regards,RF

October 15, 2009 5:24 PM

Anonymous said...

Btw sir, if you don't mind send the answer to my email win_juve@yahoo.co.id.. Thnxs alot sir..

October 15, 2009 5:26 PM

Anonymous said...

Hi,

Do you have a suggestion to my problem sir...I tried follow your instruction for using LMTOOLS for NX6 license error, but there is a message which write like this :1. In "Server Diags" Tab :ERRORS: C:\Program Files\UGS\UGSLicensing\ugs2.lic:line 16:Invalid license file syntax.License path: C:\Program Files\UGS\UGSLicensing\ugs2.lic;FLEXnet Licensing error:-2,40027

I've checked the line, it's go to Server ricky ID:00..... Vendor ugslmd

2. In "Server Status" Tab:[Detecting lmgrd processes...]Error getting status: Invalid license file syntax.License path: C:\Program Files\UGS\UGSLicensing\ugs2.lic;FLEXnet Licensing error:-2,40027

In window :NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVERto be configured properly.it can either be set to the value port@hostname of theNX license server or it can be set to point directly to a license file.by default it will be of the form 28000@servername.

License before Error :SERVER YourHostname COMPOSITE=B17E62xxxxxx 28000VENDOR ugslmd

License Editing I've tried to repaired :1. (First Step) Server ricky ID=20091015 28000@ricky Vendor ugslmd (Ricky is my Host name)2. (Second Step) SERVER YourHostname COMPOSITE=9B2935xxxxxx 28000

VENDOR ugslmd

Result still same "Error syntax". This is happen after I format my PC. I have tried follow your instruction in this blog, but result still same. Any suggestion sir?? If you don't mind, please send the suggestion to my mail. Thanxs be4 sir...

Best Regards,RF(win_juve@yahoo.co.id)

October 16, 2009 12:30 PM

CAD Help Center said...

Hi ricky,

i was out of station.......so for your problem you need to set environment variable properly and you need to add the port 28000 in exceptional list of windows firewall.

for environment variable check this post:

http://cadhelpcenter.blogspot.com/2009/01/environmental-variable-and-port-value.html

and to add port in firewall:

1. open firewall.2. go to exceptional list.3. click on add port.4. write UGS in name and 28000 in port number.5. select TCP.6. click OK.7.close firewall by again click OK.

hope that your problem will be solved.

have a nice day.

October 21, 2009 11:13 PM

Anonymous said...

Hi,

i wanted to install Nx6 too ... have made everything strict like in the manual. SERVER "Computername" .....Then i tried the solutions which r described here but nothing worked.I have Win7 64Bit ... so could it be that this is the reason why i get an Error? (NX License Error: Invalid (inconsisten) license key ...)hope u can help

November 5, 2009 8:36 PM

CAD Help Center said...

Hi Anonymous,

here in the post UG 6 is installed and working in Windows 7 x64 bit.

so don't think about the version of UG and Windows.....this is fine....

you have to check the post about:(NX License Error: Invalid (inconsistent) license key ...)

you can check it here:

http://cadhelpcenter.blogspot.com/2009/03/invalid-inconsistent-license-key-or.html

and my request to all is please write the comments on the proper post.like issues related to windows 7 and UG are to be commented on respective post.

and please check the comments properly because these have solutions.

hope that your problems will be solved...have a nice day

November 5, 2009 11:44 PM

Anonymous said...

i installed pro engineer wildfire 3.0 along with flexnet license server.the server started successfully. but when i started proE, it showed the following error." error in getting license for PROE_FLEX3C, no such feature exist"

pls help

January 8, 2010 9:20 PM

Anonymous said...

hello how are you tnx for all topics pleas help mehow can i setup nx 7 and licenstnx

April 9, 2010 12:13 AM

Amandeep S. said...

Hi,

I have installed Ugnx5 on windows vista 32 bit, but when i start my UG it gives error " UNKNOWN ERROR CODE"

any suggestion how to rectify this problem.

RgdsAds

May 18, 2010 10:08 AM

ashboxer said...

HiI have installed NX4 on vista 32bit but I am having problem. every time I try to start nx I get an error message " Initialization error-NX License Error: the license server has not been started yet, or UGII_LICENSE_FILE is set to the wrong port@host. [15]"

July 9, 2010 11:57 PM

Anonymous said...

HelloMaybe you can help meI downloaded "Altair Hyperworks 10.0" from this page http://www.downarchive.com/, when tried to run the program it displays the next message:

The desired vendor daemon is down.Check the lmgrd log, or try lmrreead.Feature GlobalGridWorksAMVendor:Host: JoseLicense path: 7788@Jose, C/Altair/hw.10.0/security/altair_lic.datFLEXnet Licensing error: -97,121

I tried the others solutions in blog. I expect you can help me.

August 31, 2010 10:46 AM

tek said...

Hi

I am having massive dramas with this install.

I had had NX6 working fine with NONE of the extra steps noted in many of the posts. All the sudden, I lost a Palette and had to reinstall NX6 and now, drama.. It WILL not load with the normal error reported about lic.

I have done all the steps outlined in these posts...nothing works..

Any other suggestions?

October 12, 2010 11:41 AM

avco said...

HelloMaybe you can help meI allso downloaded "Altair Hyperworks 10.0" when tried to run the program it displays the next message:

The desired vendor daemon is down.Check the lmgrd log, or try lmrreead.Feature GlobalGridWorksAMVendor:Host: JoseLicense path: 7788@Jose, C/Altair/hw.10.0/security/altair_lic.datFLEXnet Licensing error: -97,121

I tried the others solutions but nothing worked. I expect you can help me

November 22, 2010 12:49 PM

Anonymous said...

Is there anymore information you can give on this subject. It answers a lot of my questions but there is still more info I need. I will drop you an email if I can find it. Never mind I will just use the contact form. Hopefully you can help me further.

- Robson

December 16, 2010 11:52 AM