NEW Kingfisher Spruce - ATS Timberatstimber.co.nz/.../12/Kingfisher_Spruce_Nov_2014_email.pdf8...

Kingfisher Spruce™

Kingfisher Spruce™ “Making the unbelievable, affordable.”

NEW

NEW

[email protected] 3KINGFISHER SPRUCE™NOVEMBER 2014

KINGFISHER SPRUCE™NOVEMBER 20140508 22 77 22Tech Support:

Contents

AMAZING FACTS 4

BACKGROUND 5

WHY KINGFISHER SPRUCE™ 6

THE RANGE 7

SPECIES INFO 8

COMPARISON TABLE 9

CERTIFICATION 10

COMPLIANCE 11

LETTER OF APPROVAL 12

FAQ 14

BEST PRACTICE GUIDES 16

NOTES 17

DISCLAIMER 18

CONTACT US 19

Disclaimer:Images are for exemplar projects around the world.

Kingfisher Spruce Trademark is pending.

EXCEPTIONALQUALITY.

SUPERIORPERFORMANCE.

GREATVALUE-FOR-MONEY.



Behind the Scenes

We decided to radically change the norm of the NZ timber industry.

Being industry experts in visual, solid timber for over

20 years, ATS Timber saw an increasing demand for a

highly visual and structural, solid timber beam range.

Over 7 years ago we launched our unique range of

Kingfisher SG8 solid Pine, kiln dried beams. Producing

these Radiata Pine beams from the NZ timber resource

presented us with numerous on-going challenges.

There had to be a superior alternative. It had to be a

better visual grade, have superior structural properties

to Radiata Pine, meet or exceed all appropriate NZ

Standards, be more dimensionally stable, be price

competitive and be environmentally certified.

We would accept nothing less than the best in the world.

Twelve months of R&D has resulted in this launch of

Kingfisher Spruce™ “Making the unbelievable, affordable.”

Read on to see the benefits of choosing Kingfisher

Spruce™ in your next project.

© Photography copyright Andreas Krappweis

Every year a large Norway

Spruce tree is used at the

Rockefeller Centre

in New York as a

Christmas Tree. 9Old Tjikko, a 9,550 year old Norway Spruce tree in

Sweden, is considered the oldest-living clonal tree

in the world.

10

Some spruce trees

can grow to over

60m high with a

canopy spread up

to 12m wide.

Great resilience

and elasticity

properties

It has the highest

strength-to-weight

ratio of any timber

species in the

world

Spruce gained early fame as an aircraft and boat

building material because of its high strength to

weight ratio and shock absorbing qualities.

53It seasons readily,

and, once dry, is

stable with very

little tendency to

warp or twist 4

The Wright

Brother’s first

aircraft was made of

Spruce

Spruce trees can

live up to 1000

years

86Accepts & holds paint &

stain finishes very well,

requiring fewer coats

than other timber

because of its light,

uniform colour 7

21

AMAZING FACTS.



Why Kingfisher Spruce™ ? The Range: Kingfisher Spruce™

Outdoor-H3.2CQ Green

Indoor-UT Natural

Superiorvisual grade

Smallarrised edges

Responsibly sourced

ExceedsNZ Standards

Superiorstrength & stability

SG8& SG10

Structural Kiln Dried

TGV Panelling Kiln Dried

UT H3.2CQ UT H3.2CQ

90 x 45 l l l l

140 x 45 l l l l

190 x 45 l l l l

240 x 45 l l l l

290 x 45 l l l l

90 x 70 l l l l

140 x 70 l l l l

190 x 70 l l l l

240 x 70 l l l l

290 x 70 l l l l

90 x 90 l l l l

140 x 90 l l l l

190 x 90 l l l l

240 x 90 l l l l

290 x 90 l l l l

UT

ATS-TGDV12818 128c x 18 l

SG8

CODE FINISH SIZE

PG SG10

PEFC or FSC Certified4.8 and 6.0m lengths

| SG8 & SG10 products have a small arrised edge| No visual branding on faces, end-tagged only

Kingfisher Spruce TGV Panelling is a highly visual tight-knot Dressing Grade.© Photography copyright Max Mitenkov

STAINLESS STEEL FIXINGSMUST BE USED WITH COPPER QUAT (CQ) TREATMENT

SG8

STAINLESS STEEL FIXINGSMUST BE USED WITH COPPER QUAT (CQ) TREATMENT

SG10PEFC

ATS-TGDV12818

64mm

18mm

64mm

128mm

IMPORTANT: H3.2CQ requires stainless steel fixings



Comparison Table

CH

AR

AC

TER

ISTI

CS

Kin

gfis

her

Pine

Dou

glas

Fir

Mac

roca

rpa

Ced

arG

lula

m

Wet

rr

la

rr

Kiln

Dri

eda

a5

ra

a

Vis

ual

al

aa

al

NZ

Gro

wn

ra

aa

ra

PEFC

or

FSC

al

lr

ll

SG8

aa

ar

rG

L8

SG10

ar

lr

rG

L10

Long

Len

gth

7.2m

rl

rr

ra

TREA

TMEN

TS

Unt

reat

eda

la

aa

a

H1.

2 B

oron

rl

lr

rl

H3.

1 LO

SPr

ar

rr

r

H3.

2 CQ

aa

rr

rH

3.2

CCA

FIN

ISH

ES

Roug

h Sa

wn

rr

ra

ar

Plan

er G

auge

d (D

4S)

aa

aa

aa

Ban

d S

awn

rl

ll

ll

Key:

a

Yes

l

Som

etim

es

r

No

5

50m

m O

nly

Dis

clai

mer

: Inf

orm

atio

n ha

s be

en p

repa

red

in th

e m

ost a

ccur

ate

and

fair

way

pos

sible

giv

en th

e co

mpl

ex n

atur

e an

d va

riatio

ns in

sup

ply

in th

e in

dust

ry. I

nfor

mat

ion

in th

is ta

ble

may

var

y fro

m d

iffer

ent t

imbe

r sup

plie

rs. F

eatu

res

indi

cate

d ha

ve b

een

colla

ted

from

indu

stry

sour

ces

and

prod

ucer

s an

d is

curre

nt a

t the

tim

e of

pub

licat

ion.

Grain/Texture

Norway Spruce has a

fine, even texture, and a

consistently straight grain.

Sustainability

This wood species is not listed in the CITES Appendices, and is

reported by the IUCN as being a species of least concern. Note:

Kingfisher Spruce™ is supplied as PEFC Certified.

Rot Resistence

Heartwood is rated as

being slightly resistant to

decay.

Allergies/Toxicity

Although severe reactions are quite uncommon, Spruce in the

Picea genus has been reported as a sensitizer. Norway Spruce

in particular has been reported to cause skin irritation and

asthma-like respiratory effects.

Shrinkage

Radial 3.9%, Tangential

8.2%, Volumetric 12.1%,

T/R Ratio 2.1

Colour/Appearance

Norway spruce is typically

a creamy white, with a hint

of yellow and/or red.

SPECIES INFO.

Workability

Works well, although

care is needed around

knots. Glues and finishes

well. If staining is done

it is recommended that

samples are done to

ensure the desired results

can be achieved. A sanding

sealer, gel stain or toner

is recommended when

colouring Spruce.

Species Name Picea abies

Common NamesNorway Spruce, European Spruce, German Spruce

Tree Size35-55m tall and 1-1.5m trunk diameter

Average Dried Weight405 kg/m3

Specific Gravity(Basic, 12% M.C.)0.32, 0.41

Janka Hardness1,680 N

Modulus of Rupture63 MPa

Elastic Modulus9.7 GPa

Crushing Strength35.5 MPa

DurabilityClass 4 (untreated)

OdourNo characteristic odour.

Source: http://www.wood-database.com

Kin

gfis

her

Spru

ce™



Certification Compliance

• Supplied with every order

• Ideal for council inspectors and engineers when signing-off on projects.

Complies With Verification Licence No.

Independently Auditedby Grade Right (NZ) Ltd.

GOING TO GREAT LENGTHS FOR OUR CUSTOMERS

A T S T I M B E R L I M I T E D I tel: +64 6 366 0160 I fax: +64 6 367 9760 I freephone: 0508 22 77 22 I freefax: 0508 22 77 11address: 20 Roe Street, PO Box 255, Levin 5540, New Zealand I email: [email protected] I web: www.atstimber.co.nz

Bending strength (modulus of rupture) 14.0 MPa

Bending stiffness (modulus of elasticity) 8.0 GPa

Tension strength 6.0 MPa

Compression strength 18.0 MPa

20.0 MPa

10.0 GPa

8.0 MPa

20.0 MPa

CharacteristicsSG8 SG10

Certificate of Conformance

NZS 3622:2004

Kingfisher Spruce™

This is to certify that the timber supplied as Kingfisher Spruce™ has beenproduced and verified in accordance with the following New Zealand Standard:

Kingfisher Spruce™ beams and framing display the following characteristics:

Stainless Steel �xings must be used with Copper Quat (CQ) treatment

3602:2003NZS - GV108 -

Kingfisher Spruce™ Certificate of Conformance • NZS 3622: Verification of Timber Properties. Grade Right (NZ) Ltd has approved that Kingfisher Spruce has exceeded the

equivalent properties of SG8 and SG10 in kiln dried SG8 and SG10.

• NZS 3602: Timber & Wood-based products used in Building – “The table includes the most commonly used and

generally available species. They do not purport to be exhaustive , nor cover all the species that may be available from

time to time. Specifiers are advised to contact local suppliers to determine species availability.” Clause C104.1, page 11

• NZS 3604: Timber Frame Buildings – Specification and spans for SG8 & SG10 Kingfisher Spruce are to be determined

via the span tables in this Standard.

• NZBC Clause B2 Durability – As untreated, Kingfisher Spruce has a durability rating of 4 (perishable/non-durable)

which is the same as untreated Radiata Pine. ATS Timber recommends that SG8 & SG10 untreated timber is only used

in ‘low-risk designs’ and is signed off by appropriate authorities. We recommend that all Kingfisher Spruce used in its

untreated state has a surface coating applied to assist it in its longevity and protection against insect attack. H3.2CQ

can be used in exterior applications with no ground contact as covered in The Building Code.

• Alternative Solution: “An alternative solution is a building design, of all or part of a building, that demonstrates

compliance with the Building Code…The Building Code being a performance based code, allows for innovation and

uniqueness.”

• We recommend that Kingfisher Spruce SG8 & SG10 in UT is only used in ‘low-risk’ designs unless authorized by

appropriate authorities. Please note: Kingfisher Spruce is not marketed for use as a general internal framing timber.

• Email [email protected] to receive a copy of a full technical document.




Letter of Approval Letter of Approval

Letter from Grade Right (NZ) Ltd, a leading government approved timber verification agency.

continued on page 14 >

continued from page 13>



F.A.Q.F.A.Q.

Q: This range of Kingfisher Spruce™ is far superior to the existing

Radiata Pine range, is it that much more expensive?

A: No. Even though it is a far superior product it is very similar in price to the

existing Radiata Pine range meaning you get a lot more value-for-money.

Q: Will it be available in a band sawn finish?

A: Not at this stage. All stock will be held in a dressed finish with a small

arris on each corner.

Q: Can I use Kingfisher Spruce™ where Radiata Pine, Douglas Fir or

Macrocarpa has been?

A: Yes, as an Alternative Solution. Kingfisher Spruce has proven structural

properties that are equivalent to, or exceed NZS requirements. Please

ensure the architect, engineer, council and appropriate authorities

authorise the change.

Q: Spruce is not mentioned in the NZ Building Code and NZ Standard,

is it compliant?

A: Yes, as an Alternative Solution. As you will see from this publication,

Kingfisher Spruce has undergone rigorous testing and is equivalent or

exceeds all NZ structural standards.

Q: Can you supply job-lot quantities in different sizes and lengths?

A: Yes. We can supply any of the standard size range in 4.8 and 6.0m lengths

in multiple-size, part-packet lots through any of our 300+ Approved

Resellers nationwide.

Q: Is there any defects that can occur with Kingfisher Spruce?

A: Yes. As with any solid natural timber product, it is subject to the bending,

splitting, twisting, bowing and cupping. The characteristics though

of Spruce make it far superior to Kingfisher SG8 Radiata Pine range. It

grows very slowly in cold climates, so has very tight growth rings and

hasn’t got the troublesome core wood that is characteristic of Radiata

Pine. This means it stays a lot more stable and is a lot stronger and stiffer.

The dry nature of Kingfisher Spruce (approx. 12-15%) means that surface

splitting is not uncommon but is unlikely to impact the structural

properties of the timber.

Q: Spruce is a European species. How will it perform in NZ conditions?

A: We have gone to great lengths in testing this product and getting

independent reviews on it by recognized timber industry engineers,

auditors, government agencies and local council authorities. We have

chosen it for its world-renowned structural performance and visual

features (small knots, tight grain and pale colour). It must only be used in

applications covered in the NZ Building Code in relation to its durability

and structural performance properties.

Q: What is the durability of Kingfisher Spruce?

A: In its untreated state it has a durability rating of Class 4 which is the same

as Radiata Pine. The H3.2CQ treated option meets the NZ Standards

for treatment performance for Hazard Class 3.2 for exterior use, above

ground. Untreated sapwood is susceptible to insect attack and this can

be minimized through applying a sealant or coating and making sure it

is kept in a dry atmosphere.

Q: Where can I learn more about the Spruce species?

A: http://www.buzzle.com/articles/spruce-trees-facts.html ; http://

www.norwayspruce.com/ ; http://www.wood-database.com/lumber-

identification/softwoods/norway-spruce/ ; http://index.about.com/

slp?&q=norway+spruce+facts&sid=7ae1d86a-5179-414c-9619-

01e237edf0a5-0-ab_gsb&kwid=norway%20spruce%20facts&cid=5307

2475166&site=&gclid=CjwKEAjwk_OhBRD06abu3qSoxlwSJACt7sZ7sPn

91FpCjIAbJdYcQOf-IWQG3So1trtpkul7IlYpQhoCeRXw_wcB

© Photography copyright (from top to bottom)

::: Top / © by Allison Choppick

::: Center / © by Philip Pena

::: Bottom left / © by Andreas Krappweis

::: Bottom right / © by Rajmund Barnas



NotesBest Practice Guides

Disclaimer:This information is a guide only. Professional advice from an industry expert regarding each specific application is recommended.

Please read the above in conjunction with the NZ Building Code and Branz publications.

ATS Timber Ltd will not take any responsibility for any product failure where the above

Best Practice Guidelines haven’t been fully adhered to.

General

• All products must be inspected as being fit for intended purpose

before installation. ATS Timber Ltd accepts no responsibility for

movement or splitting of the timber once received and/or installed.

• All products must be installed correctly in accordance with the New

Zealand Building Code.

• All fasteners and hardware used in conjunction with the timber must

comply with equivalent New Zealand Standards and best industry

practices. We recommend the use of stainless steel fasteners and

hardware for maximum performance, especially where the product is

treated with CCA, LOSP or ACQ.

• All timber should remain in its protective packaging until it is ready

for installation.

• Most timber will require some preparation before and/or after

installation to achieve a high quality finish.

• We recommend that all timber products should be installed and

securely fastened promptly upon receipt of the goods to minimise

any movement that may result from them being left loose or in

extreme conditions.

• These are natural products and may be subject to movement and

resin bleed especially in hot conditions.

• We do not recommend the use of dark paints or coatings as this

may accentuate movement and splitting of timber, especially if it is

exposed to the sun or hot temperatures.

• Must be protected from any moisture or weather.

• Should be used in a well ventilated, interior environment and

not subject to extreme or prolonged heat as this may accentuate

splitting, bowing and twisting.

• Untreated is not recommended to be used in any applications that

will be exposed to any weather or moisture.

• They are not sanded and sealed. Products will require work before

applying coatings.

Handling of treated timber

• Wear a dust mask and protective eye wear when cutting and sanding

treated timber.

• Wear gloves when handling treated timber.

• Thoroughly wash any skin that has been in contact with treated

timber.

• Dispose of treated timber by ordinary rubbish collection. Do not burn.

• Any cut ends must be end- sealed before installation.




Contact Us

Questions? Contact one of our Timber Consultants today.

We work in conjunction with over 300 Approved Resellers to offer a high level of expertise and support when working

with products in this publication.

0508 22 77 22

[email protected] www.atstimber.co.nz

CONTACT A TIMBER CONSULTANT

We look forward to being of assistance in the near future.

Disclaimer

• All products are subject to availability at time of order.

• Every effort has been made to ensure the information contained

in this publication complies with existing building standards and

recognised codes of practice at time of printing. No responsibility is

taken for any errors or omissions, or for any specifications based on

this document. ATS Timber Ltd reserves the right to revise without

prior warning any information contained in this publication.

• All information, images and recommendations in this publication

are a guide only.

• Users of ATS Timber products should rely on their own professional

judgement and skill in determining the appropriateness of product

choices and design for New Zealand Building Code compliant

systems. ATS Timber Ltd will not be responsible for any loss due to

incorrect handling, installation, product care; or poor design when

using our products.

• Timber is a natural product and is subject to movement, especially

if exposed to weather, moisture and heat. Please refer to our ‘Best

Practice’ guidelines in this publication to minimise this risk.

• ATS Timber Ltd takes no responsibility for any recommendations

from a third party or reseller of our products unless there has been

prior consultation with us regarding the specific situation.

• The timber sizes noted are ATS Timber Ltd’s standard sizes. Any

variations may incur additional charges and lead times. Any variation

to dimensions of verified timber will mean that verification may not

be achievable.

• All information contained in this publication is copyright, and may

not be reproduced in any form without prior written permission

from management at ATS Timber Ltd.© Photography copyright Andreas Krappweis

• Page 9: Information has been prepared in the most accurate and fair way possible given the complex nature and variations in supply in the industry.

Information in this table may vary from different timber suppliers. Features indicated have been collated from industry sources and producers and is

current at the time of publication.

• Page 12: This information is a guide only. Professional advice from an industry expert regarding each specific application is recommended. Please read

the above in conjunction with the NZ Building Code and Branz publications. ATS Timber Ltd will not take any responsibility for any product failure

where the above Best Practice Guidelines haven’t been fully adhered to.

• Images are for exemplar projects around the world.

• Kingfisher Spruce Trademark is pending.

©ATS Timber Ltd 2014

Approved Reseller

GOING TO GREAT LENGTHS FOR OUR CUSTOMERS

Kingfisher Spruce™“Making the unbelievable, affordable.”

NEW Kingfisher Spruce - ATS Timberatstimber.co.nz/.../12/Kingfisher_Spruce_Nov_2014_email.pdf8...

Documents

Transcript of NEW Kingfisher Spruce - ATS Timberatstimber.co.nz/.../12/Kingfisher_Spruce_Nov_2014_email.pdf8...