New Horizons in Accelerated Stability Modeling-- Tablet ...
Transcript of New Horizons in Accelerated Stability Modeling-- Tablet ...
![Page 1: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/1.jpg)
[email protected] 2016 1
New Horizons in Accelerated Stability Modeling-- Tablet Dissolution, Tablet
Disintegration and Product Appearance
Kenneth C. Waterman, Ph.D.FreeThink Technologies, Inc. Branford, CT
![Page 2: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/2.jpg)
[email protected] 2016 2
Part I: Accelerated Dissolution Stability Determination
Can dissolution changes with time be modeled in an accelerated process?
![Page 3: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/3.jpg)
[email protected] 2016 3
Solid Dosage Forms
1.Immediate release tablets2.Capsules3.Controlled release tablets
a.Hydrophilic matrix tabletsb.Coated beads
![Page 4: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/4.jpg)
[email protected] 2016 4
Solid Dosage Forms
1.Immediate release tablets2.Capsules3.Controlled release tablets
a.Hydrophilic matrix tabletsb.Coated beads
![Page 5: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/5.jpg)
[email protected] 2016 5
Dissolution Testing
• Stage 1: 6 tablets tested, all >Q+5%• Stage 2: additional 6 tablets tested; average (of 12) >
Q; all tablets >Q-15%• Stage 3: 12 more tablets tested; average (of 24) >Q;
<3 tablets have <Q-15%; 0 tablets <Q-25%
![Page 6: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/6.jpg)
[email protected] 2016 6
Notes About Stage 1 and Variability
• Many Stage 1 dissolution failures observed on stability studies• Very few Stage 2 dissolution failures observed
• Stage 1 dissolution requires all 6 tablets have Q+5• If potency of lot is low, content uniformity leads to random
failures (predictably)• If any loss of potency, makes matters worse (predictably)• Variability much less likely to cause Stage 2 failure• Stage 1 failures on stability often investigated, yet not reflective
of any dissolution instability!
![Page 7: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/7.jpg)
[email protected] 2016 7
Notes About Stage 1 and Variability
• Example:• Q = 75% (at time t)• Tablet dissolution variability (content
uniformity + measurement variability) = 5%• Average amount dissolved at t = 95% (for lot
with 100% potency)• Example lot potency (average) = 97%
• Probability of failing Stage 1: 4.4%• Probability of failing Stage 2: <0.001%
![Page 9: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/9.jpg)
[email protected] 2016 9
Critical Relative Humidity (CRH)
Entropy increases
Dissolved solute increases entropy: decreases advantage of going into vapor phase. Result: saturated vapor pressure in air reduced
![Page 10: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/10.jpg)
[email protected] 2016 10
Critical Relative Humidity (CRH)
Saturated solution (i.e., when solid present at equilibrium with its solution) has a single activity (entropy and enthalpy)Air above has a single partial pressure of water (saturated, but lower than that above pure water)
![Page 11: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/11.jpg)
[email protected] 2016 11
Critical Relative Humidity (CRH)
If more water added, more solute dissolves, but concentration remains saturated therefore vapor pressure remains saturated
![Page 12: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/12.jpg)
[email protected] 2016 12
Critical Relative Humidity (CRH)
• If solid placed in air at RH > CRH, condensation (deliquescence) will occur since above water’s saturation partial pressure (though not above that over pure water)
• Deliquescence is not absorption: liquid water is condensed from the air
• CRH is a sharp point: below this RH, not saturated so no condensation occurs
• Ability to lower the partial pressure of saturated air depends on ability to raise entropy of liquid water solution• Only depends on moles of species in solution• Will change with temperature if saturated solubility
changes• Note, most compounds increase solubility as a function of
temperature
![Page 13: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/13.jpg)
[email protected] 2016 13
Critical Relative Humidity (CRH) and Dissolution
• Many tablets will dramatically change dissolution after deliquescence
• Packaging and storage conditions will predict when this abrupt transition occurs
• Can use ASAPprime® to determine shelf-life: time before deliquescence occurs
![Page 14: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/14.jpg)
[email protected] 2015 14
Example Issue
• NaCl 75%RH (40°C)• Sorbitol 69%RH (40°C)• Fructose 64%RH (40°C)
![Page 15: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/15.jpg)
[email protected] 2016 15
Note
• Some polymers behave like deliquescing materials even when not technically dissolving: sections of the polymer “dissolve” to alter water’s entropy and lower CRH
• Example: croscarmellose sodium
![Page 16: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/16.jpg)
[email protected] 2016 16
Immediate Release Tablet Dissolution Stability when Storage <CRH
Step 1: Critical Relative Humidity (CRH) Screen
• Screen for deliquescence point (CRH) from 60-80°C• Accelerated dissolution stability studies need to stay
below CRH
![Page 17: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/17.jpg)
[email protected] 2016 17
Disso Stability Design for Drug Product I
60
65
70
75
80
85
90
95
100
30 40 50 60 70 80
RH
T (°C)
deliquescence
![Page 18: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/18.jpg)
Dissolution behavior for Drug Product I at 15-min as a function of time at specified temperatures (80%RH)
General Behavior
[email protected] 2016 18
Specification limit
25
35
45
55
65
75
85
95
105
0 2 4 6 8 10 12 14
15
min
%d
isso
lve
d
Time (days)
40°C
50°C
60°C
70°C
![Page 19: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/19.jpg)
[email protected] 2016 19
Drug Product I: General Behavior
• Change in disso not gradual: discontinuous function
• Cannot assign a rate of change• Can still assign a storage time to failure
• Note: potency not changed significantly during any of the challenge conditions
![Page 20: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/20.jpg)
[email protected] 2016 20
Dissolution Stability: Product 1
• Shows both temperature and RH dependencies of storage time to fail
• Can fit with ASAPprime® modified Arrhenius equation:
ln1
𝑡𝑓𝑎𝑖𝑙𝑢𝑟𝑒= 𝑙𝑛𝐴 −
𝐸𝑎
𝑅𝑇+ 𝐵(𝑅𝐻)
![Page 21: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/21.jpg)
[email protected] 2016 21
Error Bars
• Can assign maximum and minimum storage times to failure at each condition
• Assign an approximate average and standard deviation to each failure time• Default to 50%RSD
![Page 22: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/22.jpg)
[email protected] 2016 22
Drug Product I Time to Dissolution Failure Residuals
ln A = 12.7 2.7Ea = 21.4 2.3 kcal/molB = 0.24 0.03R2 = 0.932Q2 = 0.869
![Page 23: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/23.jpg)
[email protected] 2016 23
Observations
• ASAPprime® fitting model consistent with observed data
• Remarkable that Arrhenius-type description can be used here (with the “isoconversion” concept)
• May indicate that the change in dissolution involves motion having a barrier (impacted by activation—temperature; and mobility—RH)
![Page 24: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/24.jpg)
[email protected] 2016 24
Very High B Term Observed
• B terms for chemical stability usually range from 0.00-0.10
• B term for product 1 dissolution stability = 0.24• Means small change in RH will lead to large
change in stability• Can be mistaken for a threshold or critical RH: in
fact, appears continuous
![Page 25: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/25.jpg)
[email protected] 2016 25
y = 1.9978x + 0.2173R² = 0.9656
0
5
10
15
20
0 2 4 6 8 10
Day
s to
dis
solu
tio
n f
ailu
re
Days to disintegration failure
Dissolution vs. Disintegration Product I
![Page 27: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/27.jpg)
[email protected] 2016 27
Dissolution vs. Disintegration Product I
• Dissolution and disintegration storage times to failure linearly correlated
• Implies that the change in dissolution directly linked to change in disintegration
• Slope >1 (failure more readily seen for disintegration)• Hypothesis: higher shear in disso test
requires greater changes in tablet before observable
![Page 28: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/28.jpg)
[email protected] 2016 28
Tablet 1 Dissolution/Disintegration Stability
• Disintegrant in Tablet 1 is croscarmellosesodium
• Reportedly works by wicking plus swelling• Wicking weakens interparticle forces• Swelling provide shear to break up tablet
• Does aging reduce wicking, swelling or affect the interparticle interactions themselves?• Research ongoing
![Page 29: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/29.jpg)
[email protected] 2016 29
Drug Product 2—Design
70
75
80
85
90
95
100
60 65 70 75 80
RH
Temperature (°C)
![Page 30: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/30.jpg)
[email protected] 2016 30
Product 2 Tablet Dissolution
• Change in disso again discontinuous• Can again assign storage times to dissolution failure
![Page 31: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/31.jpg)
[email protected] 2016 31
Tablet 2 Storage Time to Dissolution Failure—Residual Graphs
ln A = 81.010.1Ea = 65.27.1 kcal/molB = 0.1320.014R2 = 0.908
![Page 32: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/32.jpg)
[email protected] 2016 32
Very High B Term Observed
• B terms for chemical stability usually range from 0.00-0.10
• B term for Product 2 dissolution stability = 0.13• Means small change in RH will lead to large
change in stability• Can be mistaken for a threshold or critical RH: in
fact, appears continuous
![Page 33: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/33.jpg)
[email protected] 2016 33
y = 1.5747x + 1.0801R² = 0.9937
0
2
4
6
8
10
12
14
16
18
20
0 2 4 6 8 10 12
Day
s to
dis
solu
tio
n f
ailu
re
Days to disintegration failure
Dissolution vs. Disintegration Product 2
![Page 34: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/34.jpg)
[email protected] 2016 34
Dissolution vs. Disintegration Product 2
• Dissolution and disintegration storage times to fail linearly correlated
• Implies that the change in dissolution directly linked to change in disintegration
• Slope >1 (failure more readily seen for disintegration)• Hypothesis: higher shear in disso test
requires greater changes in tablet before observable
![Page 35: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/35.jpg)
[email protected] 2016 35
Tablet 2 Dissolution/Disintegration Stability
• Disintegrant in Tablet 1 is sodium starch glycolate
• Reportedly works by swelling• Swelling provide shear to break up tablet
• Does aging reduce swelling or affect the interparticle interactions themselves?• Research ongoing
![Page 36: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/36.jpg)
[email protected] 2016 36
Solid Dosage Forms
1.Immediate release tablets2.Capsules3.Controlled release tablets
a.Hydrophilic matrix tabletsb.Coated beads
![Page 37: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/37.jpg)
[email protected] 2016 37
Hydrophilic Matrix Controlled Release Tablets
• Viscous “gel” formed from high molecular weight, water soluble polymer
• Drug release controlled by combination of erosion + slowed drug diffusion
• As ages, MW reduces (polymer strand degradation)
• This chemical process follows ASAPprime® model• Results in faster drug release upon aging, which
can be modeled effectively
![Page 38: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/38.jpg)
[email protected] 2016 38
Appearance Stability
• In some cases, shelf-life is limited by changes in the appearance of a product
• For tablets different factors:• Color• Mottle• Cracking, etc.
![Page 39: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/39.jpg)
[email protected] 2016 39
Appearance Stability
• In some cases, shelf-life is limited by changes in the appearance of a product
• For tablets different factors:• Color• Mottle• Cracking, etc.
![Page 40: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/40.jpg)
[email protected] 2016 40
Tablet Color Stability
• Root causes• Chemical degradation• Migration
• Can we model these in accelerated process?
![Page 41: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/41.jpg)
[email protected] 2016 41
Tablet Color Stability
1. Need analytical method2. Need specification limit
![Page 42: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/42.jpg)
42
Quantifying Color
Tristimulus L,a,b color space
![Page 43: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/43.jpg)
[email protected] 2016 43
Color Quantification
• Tristimulus measurements allow for good quantification of tablet color using commercial equipment• Need custom holder for each sample
![Page 44: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/44.jpg)
[email protected] 2016 44
Setting Specifications
• Often done qualitatively• Switch to quantitative (line
up tablets)Greater aging
Assigned specification
![Page 45: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/45.jpg)
[email protected] 2016 45
Product Behavior
60 cc-HDPE bottle30 tablets with 200 mg MCC + 100 mg spray-dried lactoseASAPprime® using diffusion modeling
25°C/60%RH
![Page 46: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/46.jpg)
[email protected] 2016 46
Product Behavior
60 cc-HDPE bottle30 tablets with 200 mg MCC + 100 mg spray-dried lactoseASAPprime® using diffusion modeling
30°C/75%RH
![Page 47: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/47.jpg)
[email protected] 2016 47
Product Behavior
60 cc-HDPE bottle30 tablets with 200 mg MCC + 100 mg spray-dried lactoseASAPprime® using diffusion modeling
Add 0.5 g silica gel desiccant
30°C/75%RH
![Page 48: New Horizons in Accelerated Stability Modeling-- Tablet ...](https://reader030.fdocuments.net/reader030/viewer/2022012608/619c027ef8dda26f1b70f711/html5/thumbnails/48.jpg)
[email protected] 2016 48
New Horizons Summary• For IR tablets, current data support
• Storage time-to-failure approach validity• Storage failure times accelerated by both T + RH in
continuous manner (no T/RH cross-term): follows modified Arrhenius equation of ASAPprime®
• Use of disintegration vs. dissolution testing• For hydrophilic matrix CR tablets, can use ASAPprime® since
loss of control a chemical process• Can underwrite disso stability with short-term studies• ASAPprime® can be applied to color changes
• Need to use tristimulus measurements• Need to establish specification limits