New Holland T9 · New Holland put the operator right at the heart of the tractor. Easy to use...

NEW HOLLAND T9

T9.39O I T9.45O I T9.5O5 I T9.56O I T9.615 I T9.67O

BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:44 Pagina 1

http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505048R

2 3

YOU’LL BE HARD PRESSED TO FIND THIS MANY HORSES SO WELL TRAINEDAt New Holland we have put all our tractor building experience into making the T9 tractor series more comfortable and even easier to drive. We have not neglected your core demands either. High capacity axles, advanced transmission control and ultra-efficient power units are housed in achassis size to match your business needs. Just take a look at what T9 Series tractors have to offer.

MORE POWER AND PRODUCTIVITYT9 tractors boast New Holland’s cutting-edge SCRtechnology for Tier 4A compliance. This means that the Cursor 9 and 13 powerplants benefit fromexceptional breathability for a significant performanceadvantage. Massive power growth delivers a peakpower up to 10% higher than the rated power, easing the T9 through the toughest work.

ABSOLUTE DRIVING PLEASURENew Holland put the operator right at the heart of the tractor. Easy to use controls are matched to brilliant all-round visibility. Four-point cabsuspension is available for the smoothest ride.

MAXIMUM VERSATILITYNew Holland have brought high horsepower tractors down to size by using a narrow (36 inch)frame on models up to 557hp(CV). This narrow frame in conjunction with larger diameter tyres make the new T9 ready for anything.

LOWER OPERATING COSTSOperating costs for the new, Tier 4A compliant T9tractors, have been reduced thanks to cutting-edgeSCR technology. The optimised fuel injection processdelivers more power with less fuel. At 600 hours, the engine service intervals reduce cost further.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505094

EXACTLY WHAT IT SAYS ON THE BONNETT9 tractors offer improved performance thanks to the Tier 4A SCR advantage, and theseproductivity enhancing characteristics are immediately obvious to all users. How? Quitesimply, it is on the bonnet. The first two digits ‘T9’ refer to the tractor’s category and thefollowing three, for example ‘560’, refer to the maximum Engine Power Managementhorsepower. On most T9 engines this EPM figure also corresponds to the peak power,the power available for any application.

Max power with EPM [hp(CV)]

T9.390T9.450T9.505T9.560T9.615T9.670

390446502557613669

EPM [hp(CV)]

T9.390T9.450T9.505T9.560T9.615T9.670

Rated power [hp(CV)]

T9.390T9.450T9.505T9.560T9.615T9.670

Hors

epow

er

Engine speed

EPM according to the load on transmission, PTO and hydraulics.

354405457507542608

364145507161


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505079Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_03A_INB

A GREAT VIEWFROM THE MOSTCOMFORTABLEAND QUIETESTCAB IN THEBUSINESS

OPERATOR ENVIRONMENT4 5

CAB THAT WORKS WITH YOU, DAY IN, DAY OUTStep into the spacious cab through the frameless door.Settle into the seat and rest your arm on theSideWinder™ II armrest. Activate the buttons on theCommandGrip™ handle and remote valve paddles.Swap through the menus on the IntelliView™ IIItouchscreen monitor. Fire up the engine and feel its smooth quiet power. Welcome to New Holland.

SETTLE IN AND ENJOY THE RIDENew Holland Comfort Ride™ cab suspension, offered on all T9 Series tractors, is revolutionary. All four corners of the cab are suspended on springand damper units with a sophisticated anti-swaysystem to ensure you get a smooth and stable ride.Captive pin mounts provide full roll over protection.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505093Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=ComfortRide_CabSuspension

SWIVEL FOR ULTIMATE COMFORT Operators who extensively use large rear equipmentwill be able work in absolute comfort, thanks to theseat’s 40° swivel angle. Moreover, the SideWinder™II armrest moves with the seat, so the controls arealways where you need them, at the tip of yourfingers.

FROM DUSK TO DAWNCab roof, engine hood and fender worklightsare easily controlled from a dedicated switchpanel. A 360 degree lighting packagesupplies a combination of HID and halogenlights. Delayed lighting ensures that you canleave the tractor in safety before the lights areturned off.

AUTO COMFORT™ SEATOperator comfort is a key New Holland priority.The advanced Auto Comfort™ seat automaticallyadjusts to the weight of the operator. Offering precision controlled damping, the seatautomatically reacts to shock loads before theyreach the operator.

YOUR UPGRADE TO BUSINESS CLASST9 operators are surrounded by comfortand convenience features. Leather seat,foot rests, carpet, sunshades, climatecontrol, electrically adjusted mirrors and afantastic view in every direction. Just someof the creature comforts waiting for youaboard a T9 tractor.

40° SWIVEL ANGLE


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505093Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505084R_T9http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505076Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505016R

INTELLIVIEW™ III TOUCHSCREEN All the information you need at a glance.Fingertip adjustment of all key settingsand compatible with the New HollandIntelliSteer™ guidance system.

• Headland turn sequencing, HTS. Press to record, store and activateautomated headland turn.

• Finger tip control for up to two remote valves.

• Rear linkage raise lower.

• IntelliSteer™ autoguidance,automated steeringengagement.

• Forward reverse shuttle switch.

• Change transmission ratio up and down.

• Ground Speed Management, GSM.Transmission and engine work togetherto optimise performance.

SIDEWINDER™ II ARMREST & COMMANDGRIP™ HANDLE6 7

SIDEWINDER II.DESIGNED AROUND YOUAs modern tractors offer increasingly sophisticated features there is a risk that theybecome more difficult to understand and operate. At New Holland we listened to ourcustomers and developed the SideWinder™ II armrest to make everything simpler.All key controls are accessed from the armrest. Throttle, transmission and hydraulics.Everything you need to control is quickly and easily accessible. More advancedfeatures can also be quickly accessed. Get in. Settle down. Job done.

As awarded by The Chicago Athenaeum: Museum of Architecture and Design.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=S2010_AWGoodDesignhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=Logo_AE50http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=T2009_AWAGRITRDES_BNhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_06A

•Multifunction joystick. The joystick can be setto operate up to 4 remote valves.

•Electronic SideWinder™ II adjustment. Move the armrest to the position that suits you.

•Full access to further advancedcontrols under the padded armrest.

•Electronic remotes. Easy to reach paddlesprovide fingertip hydraulic operation. Flow and timing can be simply adjustedthrough the IntelliView™ III touch screen.

•Linkage control mouse.Provides precise control of the massive rear three point linkage.

EASY ACCESS TO ADVANCED FEATURESPush the symbol. Activate the feature. The Integrated Control Panel, ICP,makes it simple to access advanced operating features. No need toscroll through menus to set up differential locks, HTS headland turnsequencing or ESM Engine Speed Managment.

• Optional automatic engine braking activation• Throttle up to your desired engine speed,

select Engine Speed Management, and the speed is fixed.

• Press the Headland Turn Sequencing button to record and replay the functions you use most frequently.

• Engage the rear and the front differential locks, true traction.

• Three point hitch control for hitching implements.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_06Ahttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505017RR

NEW HOLLAND GUIDANCE SYSTEMSTO MATCH YOUR NEEDS

FULLY INTEGRATED INTELLISTEER™ GUIDANCEGuidance system choice will relate to the intended applications and the need tointegrate with existing systems. With T9 Series tractors, all IntelliSteer options operatevia factory installed systems that facilitate installation and upgrades. This enables theselected package to be modified and upgraded simply and more economically.

ALL WIRED UP READY FOR YOUR CHOSEN GUIDANCE SYSTEMSeries T9 tractors are standard with a fully integrated New Holland designed and developedIntelliSteer™ Automatic Steering System. Matching DGPS or RTK Technology to fully integratedcontrol, IntelliSteer helps ensure parallel pass to pass accuracy of up to 1-2cm*. IntelliSteeris ideal for precision work in even the most demanding situations. It is designed to dramaticallyimprove operator performance and comfort. All this and more at the touch of a button.* Using RTK correction signal.

INTELLIVIEW - VISIBLE INTELLIGENCEThe standard IntelliView™ III monitor can be used to set up the New Holland auto guidance systems, and includes a visual interfacethat can be employed when operating the IntelliSteer™ system. The IntelliView™ III monitor has a touchscreen display which allowsthe programming of a variety of guidance paths, from straight A-B runsto the most complex adaptive curves. You can also personalize yoursettings simply and easily and even transfer information from yourtractor, direct to your Precision Farming software.

INTEGRATED CONTROL SYSTEMSThe New Holland IntelliSteer™ System usesbuilt-in T3 terrain compensated correctionsignals (roll, pitch, yaw) to keep the NavigationController II informed of the tractor’s orientation.Also integrated into the hydraulic system is acontrol valve which converts the signals fromthe Navigation Controller II into hydraulicmovements of the steering system.

PLM8 9


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505055Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=9C7015R6http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06Fhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06Ahttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06Bhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06Chttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06Dhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06Ehttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=70016_06G

NH 262 RECEIVERThe NH 262 receiver is fully compliant with with EGNOS,OmniSTAR or RTK correction. For RTK applications, a slimprofile radio mounts underneath the receiver.

INTELLISTEER.ON AND OFF SIMPLICITYThe CommandGrip™ handleincorporates a single button thatis used to activate the IntelliSteersystem. New Holland makesadvanced technology accessible.

FULL LASER LEVELLING INTERFACEThe electro-hydraulic systemof T9 scraper tractors is ‘plugand play’ compatible with awide range of third-party lasercontrolled levelling systems.

GOOD GUIDANCE SAVES MONEYIntelliSteer helps improve overalloperating efficiency. In poor light or during long working days, precision driving is not compromised.Improved efficiency saves money. It is as simple as that.

5 cm

3 4 5 6

2.5 cm

0 1 215 20 25 30

20 cm 7 cm

5 6 7 8 9 10

EGNOS OmniSTAR® XP OmniSTAR® HP RTK VRS2.5 cm

0 1 2

RTK GPS

LEVELS OF ACCURACY AND REPEATABILITYNew Holland offer four levels ofaccuracy. This enables you toselect the right IntelliSteer™ systemto match your needs and budget. When using RTK correction withIntelliSteer it is possible to deliveryear on year repeatability.

RTK BASE STATIONAn RTK base station can be usedto a correction signal to achieve apass to pass accuracy of 1-2cm.

2,000

1,000

0

3,000

4,000

EGNOS

Tota

l cos

t sav

ings

with

auto

gui

danc

e (£

)

£1503

£2247

£2803

HP/XP RTK

IMPROVED PROFIT

•BTS 100012 INB 15/12/09 rd.qxd 5-01-2011 17:08 Pagina 9

http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505055Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=88008_05Ahttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=6I043Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=9C7091http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39003Phttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39019_T9http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_09A_INBhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_09B_INB

ULTIMATE ENGINE BREATHABILITY

ENGINE10 11

CLEAN RUNNING THAT SAVES MONEYT9 tractors with their SCR engines suffer no performanceconstraints as a result of meeting the strict Tier4Aregulations. More power, increased torque while reducingoverall running costs, including a 600 hour service interval,are all benefits of the SCR solution. Where does AdBlue®

fit into the equation? Well, it’s already been accounted for,and if that wasn’t enough. AdBlue® should not be looked at as an extra cost, it’s your route to a lower fuel bill.Whatever you spend on AdBlue®, it is paid for severaltimes over by the reduction in fuel consumption and theincrease in output! Improved environmental profile andreduced operating costs: it’s a win-win situation.

700

600

500

400

300

200

100

0T9.390 T9.450 T9.505 T9.560 T9.615 T9.670

EPMRated power

SCR:YOUR POWER GUARANTEESCR guarantees exceptional performanceand high productivity, independent of fuelquality, sulphur levels and without theneed for costly diesel additives. Morepower from less fuel with clean emissions.

T9 tractors are powered by thesame family of advanced Tier 4Acompliant Cursor engines used in New Holland CX combines. New Holland’s engine developmentpartner, Fiat PowertrainTechnologies, has already producedover 150,000 SCR engines duringthe past five years. The proven SCR technology uses AdBlue®

to transform the harmful nitrogenoxides contained in the exhaust gasinto harmless water and nitrogen.This after-treatment system isseparate from the main enginewhich means only clean, fresh air isfed into the engine. What does thismean? Clean running power unitsthat offer improved performanceand enhanced fuel efficiency.

Pow

er o

utpu

t [hp

(CV)

]

SCR Catalyst

Nitrogen and Water

Exhaust gas containing NOx

Dosing module

AdBlue/DEF tank

AdBlue/DEF additive

Supply module


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=CleanEnergyLeader_Logohttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505088http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_10A_INBhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_10B_INB

EPM AND POWER GROWTH Either with the Engine Power Management orthrough natural power growth, T9 will deliversubstantial increases in power over the standardrated measurement. The T9.560 increases itspower by as much as 50hp(CV) as peak poweris reached or the EPM is active. Your output isthe winner.

Hors

epow

er

Engine speed

71hp(CV)

EPM according to the load on transmission, PTO and hydraulics.

DESIGNED AND BUILT BY FPTPowerful engines designed for a long life. Fiat PowertrainTechnologies have an enormous experience in the manufactureof high powered diesel engines. The knowledge brings youpeace of mind that a T9 will perform and keep performing.

ENGINE SPEED MANAGEMENTIn applications where a constant hydraulicflow or PTO speed are required, the operatorcan select Engine Speed Management. This will ensure this selected engine speed isconstantly maintained under changing loads.

“The AdBlue system is very easy to use and itcertainly didn’t cost us anymore, in fuel in factthere are fuel savings so that’s a massive benefit

and we would certainly be looking to replaceour existing tractor with this system.” James Wallis - Farmer - UK


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505052http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505052http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=JamesWallishttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_11A_INB

TRANSMISSION12 13

PROVEN DESIGN, MODERN CONTROL

0 1010 2020 30 40

16 Hi

16 Lo

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

37

31

25.7

21.4

17.7

15.4

14

12.9

11.6

10.6

9.7

8.9

8

6.9

5.8

4.8

4

13.5

6.1

INTELLIVIEW III - GEAR AND SPEED AT A GLANCEThe standard IntelliView™ III display offers easy togglingbetween menus to display information including the exactengine speed and the selected transmission ratio. This information is duplicated by the ‘A’ pillar display,ensuring the operator always has key operating data to hand.

kph

Reverse ForwardTHE FULL POWERSHIFT,TOUGHENED UPNow with added strength and improved control, the Ultra Command™ full powershift transmissionsdeveloped for T9 tractors is something special.First, it benefits from a new control system using the CommandGrip™ handle. This provides fingertip access to ‘manual’ push button shifts andautomated Ground Speed Management. Transport time between fields is kept to a minimum with a top speed of 37kph.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505102http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=9C7015R6http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_12A_INB

ENGINE POWERGEARS 9 8 9 7 6 7 8 9 10SPEED

GSM. INTELLIGENT AUTOMATIONNew Holland Ground Speed Management, GSM, is more thanjust an automated transmission shift system. With CVT-likefunctionality, it uses a combination of data relating to engineload, forward speed and operator setting, to manage bothengine and transmission speeds to optimise performance andeconomy. Simple to set up and extremely efficient, GSM is wellproven and dependable.

FIXED FORWARD SPEED? GSM TAKES CARE OF ITWhen load conditions change in the field, GSM will automaticallymaintain a fixed forward speed. The operator first sets the desiredworking speed and then selects the GSM function. The automatedsystem will then match engine and transmission speeds tomaintain this fixed forward speed, to deliver the perfect balancebetween maintaining productivity without compromising economy.

FULL COMMAND IN TRANSPORTDuring road transport, GSM will automatically shift the transmission according to load and throttle settings.

EASY SHUTTLE The forward reverse shuttle is operated via asteering column lever or the CommandGrip™handle fitted on the SideWinder™ II armrest. Two methods of changing direction, you choose the most convenient for your job.To reduce shock loads on the transmission, the shuttle clutch pack is fully modulated for a smooth change in travel direction.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505102http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39003Phttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39053_4http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505061http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_13A_INB

WE HAVE THE TRACTOR THAT ANSWERS YOUR NEEDS.

AXLES & TRACTION14 15

The new narrow frame of the T9.390 to T9.560 allows these high powered tractors to be far more flexible in the work they do. No longer confined to large fields, T9 has themaneuverability of far smaller tractors. Thanks to a 42 degree pivot angle the turning radius is just 4900mm. Fast headland turns with no soil smearing, that’s another T9 advantage.

TRUE TRACTIONWith a high powered pivot steer tractor, you have the benefit of truefour wheel drive. Individual control of a front and rear differential lockwill ensure that when conditions become tough, you’ll have the bestchance of pulling through rather than parking up.

STANDARD FRAME900/60R42 super singles

STANDARD FRAME520/85 R46 duals

2932mm

2032mm

3365mm

1626mm

WIDE FRAME710/70R42 duals

4622mm

2006mm


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670032Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505038http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505097http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670026

AXLES BUILT FOR THE JOBRegardless of frame size, T9 axles havebeen engineered and built to stand up to even the most demanding conditions. These tough axles handle high torque loadswith ease, and also offer absolute operatorcomfort. How? They feature planetary inputgears for the ultimate in quiet operation.

THE RIGHT WHEELS AND TYRESFOR YOUR APPLICATIONT9 has been engineered to take thetallest of tyres. Larger diameter tyresincrease the tyre footprint length tomaximise traction without adding extrawidth. The 900/60R42 single tyres keepthe overall width to 3 metres, making theT9 simple to move around.

MORE STOPPING POWERT9 tractors are fitted with a completely newbraking system. Both the transport and parkbrakes are more powerful with a trailer brakingcircuit included as standard. Optional automaticengine braking is activated during transport.This uses the engine to slow the tractor whenthe throttle is fully released.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505057Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=T9_4WD_Axlehttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670005_TyresR1http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670005http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505059R

ROBUST DESIGN MEETS PERFECT BALANCE

REAR LINKAGE16 17

New Holland T9 tractors use an exceptionally robust articulated Tri-Point chassis.Engineered to reduce maintenance and provide exceptional strength, the Tri-Pointsystem ensures a well balanced weight transfer between the front and rear axles. In both drawbar and three-point linkage applications, significantly less ballast isrequired. This can assist owners seeking to reduce equipment weights to meet thedemands of controlled traffic farming. T9 scraper tractors use the same Tri-Pointchassis. No costly modifications are needed.

STRENGTH MEETS FLEXIBLE DESIGNAll models can be equipped with a CAT IV-N quick-hitch rear linkage, convertible to CAT III on standard frame models. Lift capacity rises to over 9071kg on standard frame tractors,in line with the high power output of the T9.560. A 20 spline1000 speed PTO option is also available.

DRAWBAR OPTIONSA heat-treated two positionagricultural solid bar is fitted tostandard frame models. A heavyduty Class 5 is offered on widechassis models. For scraper models,a quick-hitch drawbar is Standard.Load capacities can be in excess of 4983kg on all T9 tractors,dependent on drawbar choice.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505118http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670006http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505046

THE RIGHT BALANCE It takes experience to ballast an articulated tractor correctly.Get the weights wrong, and performance, fuel use, soil compaction and productivity can all suffer. At New Holland we have established ballastguidelines that make it easier to optimiseballast, with purpose-developed weightpacks that can be tailored to matchyour needs.

T9: BUILT SCRAPER READYT9 tractors can be factory specified to meed the demands of scraperoperators. Choices include heavy duty axles and a purpose developeddrawbar. With combined high capacity and MegaFlow™ pumpoptions, hydraulic output can reach 428 litres per minute.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505118http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=9T60033http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_17A

IMPRESSIVE HYDRAULIC FLOW

HYDRAULICS18 19

T9 tractors have a high flow pump with a 216lpm as standard.For demanding hydraulic applications, an optional MegaFlow™pump is available which delivers an extra 212lpm of hydraulicflow to one bank of remotes. For those who require the ultimate in hydraulic flow, the MegaFlow™ II option is available ensuringtotal hydraulic flow is available to all remotes. A large coupler is available for applications that demand unrestricted oil flow.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670031R

FLOW CONTROL USING THE INTELLIVIEW IIIThe IntelliView™ III touchscreenmakes setting flow rates toindividual valves simplicity itself.Scroll through the menus andselect valve control. Choose theoutlet you wish to adjust, anddrag the slider with your fingerto the desired setting. Job done.

UP TO EIGHT ELECTRONIC REMOTESThe remote valves fitted to T9 tractors are easily identifiable and to relate to their in-cabcontrol. The operator can access all eight without having to move away from the comfort ofthe SideWinder™ II armrest. Four colour-coded paddles and a centrally positioned joystickmake it simpler to identify and work each remote with exact precision. The CommandGrip willalso give access to two valves. Flow, timing and detent settings can be set to precisely matchthe job in hand. Each valve can also be programmed into the Headland Turn Sequence.

8 sec 5 sec 8 sec 5 sec

HEADLAND TURN SEQUENCEHeadland Turn Sequence has been refined and developed by New Hollandto ensure ease of use and set-up. For complex applications, includingoperating the very widest tillage equipment, HTS really can reduce operatorfatigue. Of equal importance, the operator can use HTS to manage someoperations but leave others to manual control. The choice is theirs. Set upis simply a case of recording the desired operations at the headland. The actions can then be repeated, automatically, by pressing the dedicated button on the CommandGrip™ handle.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670031Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39024http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39215http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39022Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10B39003Phttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=100012_19A_INB

360°: T9

The new T9 range has been designed to spend more timeworking and less time in the yard. All service points are easyto access, and super long service intervals mean they willspend more time in their natural environment: the field!

• Single piece enginehood opens wide forfull service access.

• Cooling packageopens out to makecleaning fasterand easier.

• Tool boxes areconveniently mountedon both slides of thetractor for easyaccess and storage

• Engine and hydraulic oil check and fill points are easy to reach making routine checks fast and servicing simpler. Engine service intervals have beenextended to 600 hours.

• Steps make it easier toclean the expansive glazingof the four pillar cab.

• A dedicated hatch provides fast andeasy access to the engine air filter.There is no need to lift the engine hood

• The 234 litre AdBlue® additivetank has a filler neck whichprevents filling it with fuel. It only needs to be filledonce every two refills of the 1729 litre fuel tank.

WILL I BE ABLE TO FIND ADBLUE® EASILY?The answer is yes! It will be available on yourdoorstep, through CNH Parts & Service; just contact your local dealer for more information. If that wasn’t enough, AdBlue® can even be delivereddirect to your farm for absolute convenience.

SERVICE AND BEYOND THE PRODUCT20 21


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=5A0068Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670021R

DEALER INSTALLEDACCESSORIESA comprehensive range ofapproved accessories tooptimise machine performancein all conditions can be supplied and fitted by your dealer.

FINANCE TAILORED TO YOUR BUSINESSCNH Capital, the financial servicescompany of New Holland, is wellestablished and respected within theagricultural sector. Advice and financepackages tailored to your specificneeds are available. With CNH Capital,you have the peace of mind thatcomes from dealing with a financingcompany that specialises in agriculture

TRAINED TO GIVE YOU THE BEST SUPPORTYour dedicated New Holland dealertechnicians receive regular trainingupdates. These are carried out boththrough on-line courses as well asintensive classroom sessions. Thisadvanced approach ensures yourdealer will always have the skillsneeded to look after the latest andmost advanced New Holland products.

SERVICE PLUS - LONG LASTING CONFIDENCEService Plus coverage from CovéaFleet provides owners of NewHolland agricultural machinery withadditional cover on the expiry ofthe manufacturer’s contractualwarranty. Please ask your dealerfor more details.Terms and conditions apply.

NATURAL LEADER

WWW.NEWHOLLANDSTYLE.COMWant to make New Holland a part of your everyday life? Browse the comprehensive selectionon www.newhollandstyle.com. A whole range of items are availableincluding hard wearing work clothingand a vast selection of scale models,together with so much more. New Holland. As individual as you.


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=8A005Rhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505022http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T670028RPhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505001http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505009

SPECIFICATIONS22 23

MODELS T9.39O T9.45O T9.5O5 T9.56O T9.615 T9.67ONew Holland Engine* FPT Cursor 9 FPT Cursor 13 FPT Cursor 13 FPT Cursor 13 FPT Cursor 13 FPT Cursor 13

Two stage Turbo Two stage TurboNo. of cylinders/Aspiration/Valves/Emission level 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4ASelective Catalytic Reduction system (SCR) ● ● ● ● ● ●Capacity (cm3) 8700 12700 12700 12700 12700 12700Bore and stroke (mm) 117x135 135x150 135x150 135x150 135x150 135x150Max. EPM horsepower -

ISO TR14396 - ECE R120 [kW/hp(CV)] 287/390 328/446 369/502 410/557 451/613 492/669Max. horsepower -

ISO TR14396 - ECE R120 [kW/hp(CV)] 287/390 328/446 369/502 410/557 439/597 492/669Rated EPM horsepower -

ISO TR14396 - ECE R120 [kW/hp(CV)] 287/390 328/446 365/496 403/548 440/598 477/648Rated horsepower -

ISO TR14396 - ECE R120 [kW/hp(CV)] 261/354 298/405 336/457 373/507 399/542 447/608Rated engine speed (rpm) 2000 2100 2100 2100 2100 2100Max. torque - ISO TR14396 (Nm) 1745 @ 1400 1899 @ 1400 2136 @ 1400 2374 @ 1400 2540 @ 1400 2848 @ 1400Torque rise (%) 40 40 40 40 40 40Viscous coupled cooling fan ● ● ● ● – –Hydraulically driven cooling fan – – – – ● ●Earth friendly engine oil filter ● ● ● ● ● ●Automatic exhaust brake O O O O O ODiesel capacity (Litres) 870 1230 1230 1230 1168 1729DEF/AdBlue® tank capacity (Litres) 174 174 174 234 234 234Service interval (hours) 600 600 600 600 600 600TransmissionIntelliShift™ system ● ● ● ● ● ●Ground Speed Management system (GSM) ● ● ● ● ● ●16x2 Ultra Command™ Full-Powershift (40kph) ● ● ● ● ● ●Min. speed (kph) 4 4 4 4 4 4Electrical12 volt alternator (Amps) 200 200 200 200 200 200Battery capacity (CCA) 2x1000 2x1000 2x1000 2x1000 2x1000 2x1000Axles4WD front axle ● ● ● ● ● ●Articulation angle (°) 42 42 42 42 38 38Turning radius (mm) 4900 4900 4900 4900 5700 5700Front and rear differential locks ● ● ● ● ● ●HydraulicsClosed Centre Load Sensing (CCLS) ● ● ● ● ● ●Main pump flow (Lpm) 208 216 216 216 216 216MegaFlow™ option pump flow Standard / High flow (Lpm) 408 428 428 428 428 428Electronic Position Control O O O O O ORemote valvesType Electro hydraulic Electro hydraulic Electro hydraulic Electro hydraulic Electro hydraulic Electro hydraulicMax. no. rear valves 8 8 8 8 8 8Joystick control ● ● ● ● ● ●Rear linkage O O O O O ORear linkage category IV-N / III IV-N / III IV-N / III IV-N / III IV-N IV-NMax. lift capacity through the range

(610mm behind ball ends) (kg) 9071 9071 9071 9071 8900 8900Rear PTO O O O O O OAuto Soft Start ● ● ● ● ● ●Engine speed at 1000rpm (rpm) 2000 2000 2000 2000 2000 2000BrakesTransmission park lock ● ● ● ● ● ●Exhaust brake O O O O O OHydraulic trailer brakes ● ● ● ● ● ●


E

F

D

C

AB

Cab360° 4 pillar cab with FOPS - OECD Code 10 Level 1 ● ● ● ● ● ●Cab category level - EN 15695 2 2 2 2 2 2HID lighting pack ● ● ● ● ● ●Auto Comfort™ leather seat with seat belt ● ● ● ● ● ●Instructors seat with seat belt ● ● ● ● ● ●SideWinder™ II armrest ● ● ● ● ● ●CommandGrip™ handle ● ● ● ● ● ●Electronic adjustment of SideWinder™ II armrest ● ● ● ● ● ●Air conditioning ● ● ● ● ● ●Automatic climate control ● ● ● ● ● ●Air recirculation filters ● ● ● ● ● ●Electronic remotely adjustable mirrors ● ● ● ● ● ●Comfort Ride™ cab suspension O O O O O OHeadland Turn Sequence (HTS) ● ● ● ● ● ●Remote control for rear linkage O O O O O OA pillar performance monitor with enhanced key pad ● ● ● ● ● ●IntelliView™ III colour monitor with ISO 11783 connector ● ● ● ● ● ●IntelliSteer™ guidance ready ● ● ● ● ● ●Factory fit rotating beacons (2) ● ● ● ● ● ●WeightsMin. unballasted / shipping weights

(no rear linkage or PTO fitted) (kg) 14951 15042 15626 16895 18068 20134Max. permissible weight (kg) 19051 22453 22453 22453 25401 25401

● Standard O Optional – Not available * Developed by FPT - Fiat Powertrain Technologies ** Conditions apply

MODELS T9.39O T9.45O T9.5O5 T9.56O T9.615 T9.67O

DimensionsWith rear tyre size** 710/70R42 - Singles 710/70R42 - SinglesA Overall length inc. front weight pack and rear drawbar(mm) 7393 7615B Min. width across bar axle (mm) 3048 3048C Height at centre of rear axle to top of cab (mm) 2794 2903D Overall height (mm) 3843 3963E Wheelbase (mm) 3759 3911F Ground clearance (depends on drawbar) (mm) 443 447

** Contact your New Holland dealership for the full range of tyre sizes available.

MODELS T9.390 - T9.560 T9.615 - T9.670


http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505045http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=10T505038

AT YOUR OWN DEALER

The data indicated in this folder are approximate.The models described here can be subjected to modifications without any notice by the manufacturer.The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for anyfurther information. Published by New Holland Brand Communications. Bts Adv. - Printed in Italy - 15/12/09 - TP01 - (Turin) - 100012/INB

Visit our web site for UK: www.newholland.com/uk - for ROI: www.newholland.com/ie

For more details, ask your New Holland dealer!

NEW HOLLAND TOP SERVICE:CUSTOMER SUPPORT AND CUSTOMER INFORMATION

TOP AVAILABILITY.If you need information,or have an out of hoursquestion, ring our toll-freenumber*.All day, everyday, we are just a call away.

TOP SPEED.Express parts delivery:when you need it,where you need it!

TOP PRIORITY.Fast-track solution duringthe season: because your harvest can’t wait!

TOP SATISFACTION.We drive and track the solution you need,keeping you informed:until you are 100% satisfied!

* Calls to the Top Service team are free from landlines in the United Kingdom and Republic of Ireland. UK-based mobile calls are also free, but Republic of Ireland mobile users should call 01 2421881 andthis will be charged at your standard network rate.

New

Ho

llan

dp

refe

rs

lu

bri

can

ts

http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=5A0047RRhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=2I201http://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=6J9063RRhttp://nhagproductsupport.btsadv.com/newholland/imagebox/index.asp?Code=People_2010

New Holland T9 · New Holland put the operator right at the heart of the tractor. Easy to use...

Documents

Transcript of New Holland T9 · New Holland put the operator right at the heart of the tractor. Easy to use...