New functions and tools in CADvent 6 - Lindab · 2012-01-16 · CADvent is now available for...
Transcript of New functions and tools in CADvent 6 - Lindab · 2012-01-16 · CADvent is now available for...
lindab | business area ventilation
New functions and tools
in CADvent 6.1
lindab | business area ventilation
New End-User License Agreement
New End-User License agreement (EULA), covering network
licenses, free licenses for DIMcomfort and DIMsilencer and
general updates.
lindab | business area ventilation
Improved Uninstallation routines
If you install a newer version of CADvent,
the older will be removed automatically
lindab | business area ventilation
Ready for AutoCAD 2011 and Windows 7
CADvent is now available for AutoCAD 2011 products and Windows 7 !
Patch is also supported from this version forward.
lindab | business area ventilation
Units Manager in DashBoard
The Unit Manager has been moved into the CADvent DashBoard,
settings tab.
lindab | business area ventilation
Shut Off 2D representation
We attached a button to shut off/on the simplified 2D
representation in Visual Style “2D Wireframe” in AutoCAD
lindab | business area ventilation
Edit a diffuser or rectangular product
Reopen and edit the information on diffusers in Comfort Express
and for rectangular products.
lindab | business area ventilation
Install on several AutoCAD at the same time
lindab | business area ventilation
Improved Smart Adjust on Grip points
The Smart Adjust
command has been
improved. As long as
the objects are
connected you can
mark either component
and double-click on the
Grip point for the not
fitting connection. The
connected object will be
adjusted using Smart
Move. In the example it
is shown by clicking
either on the reducer
(top) or the connector
(bottom).
lindab | business area ventilation
Consolidation for Ventiduct (VSR)
The maximum length according to
size and flow pattern are now
integrated into the dialogue, as well as
a consolidation in standard length and
NPU and ESU as endcap on the Bill-
of-Materials.
lindab | business area ventilation
Lindab MBB boxes
Lindab’s MBB boxes are now available in CADvent. When calculating them the
balance report gives you the k-value which is similar to the adjustment
position.
lindab | business area ventilation
Connect straight with flexible ducts
In CADvent 6.0 we
improved the connection
assistant to a more
“manual” behavior so the
user could click
anywhere and CADvent
tried to connect
according to the users
demands. Then it was
difficult to connect
flexible duct straight.
Now you have a setting
in the Preferences of the
Continue From
command to select.
lindab | business area ventilation
Install on several AutoCAD at the same time
In CADvent 6.0 we
introduced an advanced
editing style for the CCT
files.
Now it’s possible to
select a separate Color
Template to the Layer
Template through the
Project Settings.
lindab | business area ventilation
New analyzer as Dashboard with support for 64-bits
The new analyzer has similar docking and hiding
functions as the other CADvent Dashboards and tabs for
airflow and pressure drop and the different sound values.
If you click the on top of a column you can sort up- and
downwards after this column (Only ACAD 2007 forward).
lindab | business area ventilation
Also designed as Dashboard we have a function called
“Modelchecker” to search the drawing for clashes, Bad
connections, open ends, sound problems on diffusers and hole
extrusions (AutoCAD Architecture objects). Double-click on an
issue and CADvent will move the problem into focus and mark
it (Only ACAD 2007 forward).
New function to check problems in drawings