NEW ADDITIONS : INTRODUCING TWO NEW GLASS DOOR HINGE … · This communication introduces two new...

ww

w.h

afel

eind

ia.c

om

ww

w.h

afel

eind

ia.c

om

NEW ADDITIONS : INTRODUCING TWO NEW GLASS DOOR HINGE MODELS

TOPICS

1. GLASS DOOR HARDWARE

• Features & Benefits 5 - 6

• Mounting of Hinges 7

• Linear Series 8 - 10

• Arc Series 11 - 13

• Nova Series 14 - 16

• Ordering Information 17

2. SADDLE PLATE FOR DCL 21 DOOR CLOSER

• Product & Technical Specifications 19

3. GLASS DOOR SEALING SYSTEMS

• Perimeter Sealing System 21

• Sliding Door Sealing System / Glass Wall Sealing System 22

• Door Bottom Sealing System 23

• Ordering Information 24

Häfele reintroduces its Range of Glass Fittings from the Startec Series which includes Häfele’s Glass

Door Hardware Range, Saddle Plate for DCL 21 Door Closer and Glass Door Sealing Systems!

1. Häfele’s Glass Door Hardware Range includes three design series - Linear, Arc and Nova. The

products in each series are uniformly aligned in aesthetics and design to provide you with the most suitable combination of hinges, a lockset and a strike patch (or plate) for a given glass door

application. Whether you want straight lines, or smooth curves or just a stellar looking combination, you are likely to find your best bet from within this range! This communication introduces two new glass door hinges recently added to the Linear and Arc Series respectively.

2. Installing a door closer on a frameless toughened glass door is now possible with Häfele’s Saddle

Plate. The saddle plate acts as a carrier for Häfele’s StarTec DCL 21 Door Closer which gets attached to the plate with the help of fixing screws. The saddle plate does not require any pre-drilling on the

glass; it simply clamps onto it.

3. Häfele’s Range of Glass Door Sealing Systems radiates a minimalistic feel and a contemporary touch to your interiors as well as exteriors. As a range, these sealing systems are highly suited to combat

unwanted infiltrations like noise, fire & smoke, weather & energy and external particles or organisms.

LINEAR SERIES:

Hinges

New Addition

Strike Patch* Strike Plate# Lock

ARC SERIES:

Hinges

New Addition


NOVA SERIES:

Hinges Strike Patch* Strike Plate# Lock

SADDLE PLATE

Note: Only for application on toughened glass door

SEALING SYSTEMS

GLASS DOOR HARDWARE RANGE

* Strike Patch : For glass application # Strike Plate : For application with a wooden frame

Glass Door Hardware

Up to

90 kgs

8 – 12

mm

DIN Left DIN Right

Two-way Installation of Hinges:

DIN Left & Right Compatible:

For Glass Thicknesses from 8 to 12 mm:

For Glass Weight up to 90 kgs:

Selected glass door hinges from the range can be installed in two ways: into the frame for an inset application or onto the frame for an overlay / offset application.

All the fittings from the range are non-handed. They can be installed for DIN Left as well as DIN Right applications thereby facilitating order procurement, delivery and on-site handling and installation.

All the fittings from this range are suitable for glass doors and panels with thicknesses ranging from 8 to 12 mm. Contemporaries in the market with similar fittings can only accommodate thicknesses up to 10 mm.

All glass door hinges (including the two newly introduced hinges) from the range are suitable for glass doors weighing up to 90 kgs (in case of a three-hinge application). This enables the possibility of installing heavy-duty glass doors especially required in case of commercial projects.

Made of Stainless Steel Grade 304:

Seamless Hairline Finish:

This range of Glass Fittings is made of stainless steel providing a sturdy and durable application. With a Grade rating of 304, this range can sustain corrosive environments especially in the case of for exterior applications (like entry doors).

The entire range comes with a fine and seamless hairline finish, making way for an aesthetically pleasing combination of fittings for your glass doors.

Locks with Computerized Cylinders & 5 Keys

Cycle Tested to Last:

The glass door locks from this range come with sophisticated computerized cylinders and a bunch of 5 keys per lockset. Computerized cylinders provide a higher level of security than normal cylinders, minimizing the rick of break-ins.

This range of glass fittings has been cycle tested to last: the hinges have been tested to last for 100,000 cycles and the locks for 300,000 cycles; assuring hassle-free operations and durable functionality in use.

SS Grade 304

• H: Height of the door = up to 2500 mm (2.5 m)

• a: Distance from top and bottom = 200 mm

H

a

a

b

H

a

a

c

• H: Height of the door = up to 3000 mm (3 m)

• a: Distance from top and bottom = 200 mm

• b: Distance between top and middle hinge = (H – 400)/3

• c: Distance between middle and bottom hinge = (H – 400)*2/3

Example: If the door height (H) = 2920mm, then: b = (2920 – 400)/3 = 840 mm c = (2920 – 400)*2/3=1680 mm

1. TWO HINGE APPLICATION : For door height up to 2.5 m and door weight up to 60 kgs

2. THREE HINGE APPLICATION : For door height up to 3 m and door weight up to 90 kgs

Hinges

New Addition



981.50.164

981.50.175 981.50.17501

981.50.170

Hinges

Material: Stainless Steel Grade 304

Finish: Stainless Steel Matt

Glass Specifications:

Thickness: 8 to 12 mm

Weight (2 hinges): (min) 30kg – (max) 60kg


Height (2 hinges): (max) 2500 mm


Width (2 or 3 hinges): (min) 600 mm – (max) 1000 mm 981.75.020

Lock and Strike Patch / Plate


Casting: Zinc Alloy


Latching function: Yes

Deadbolt: No

Cylinder: Computerized

No. of Keys: 5



1

2 3

1

2 3

Lock X 1 981.50.170

Strike Patch X 1 981.50.175

+

+

1. GLASS TO GLASS APPLICATION

Hinge X 2 or 3 981.50.164

Hinge X 2 or 3 981.75.020

OR 1

2

3

Lock X 1 981.50.170

Strike Plate X 1 981.50.17501

+

+

Hinge X 2 or 3 981.50.164

Hinge X 2 or 3 981.75.020

OR 1

2

3

2. GLASS TO WOODEN FRAME APPLICATION

Note: Both the hinges from the LINEAR Series can only be installed into the frame/profile for an inset application

Inset Application (Mounting into the frame/profile)

Glass Cut-out

Glass Cut-out for Strike Patch

Glass Cut-out for Lock

HINGE (981.50.164)

HINGE (981.75.020)

Mounting Hinge Dimensions Glass Cut-out

LOCK (981.50.170) & STRIKE PATCH (981.50.175)

Hinge Dimensions

Installation

Hinges

New Addition



981.50.163

981.50.176 981.50.17501

981.50.171

Hinges












Casting: Zinc Alloy



Deadbolt: No


No. of Keys: 5



1

2 3

Lock X 1 981.50.171


+

+


Hinge X 2 or 3 981.50.163

Hinge X 2 or 3 981.75.010

OR 1

2

3

Lock X 1 981.50.171


+

+

Hinge X 2 or 3 981.50.163

Hinge X 2 or 3 981.75.010

OR 1

2

3


Note: Of the two hinges under the ARC Series, Art. No. 981.50.163 can be installed in two ways, i.e. into the frame for an inset application or onto the frame for an overlay / offset application while Art. No. 981.75.010 can only be installed into the frame/profile for an inset application

1

2 3

Glass Cut-out



HINGE (981.50.163)

HINGE (981.75.010)

Inset Application (Mounting into the frame/profile) Hinge Dimensions Glass Cut-out


Hinge Dimensions

Installation

Mounting Option 1: Inset Application (into

the frame/profile)

Mounting Option 2: Offset Application (onto

the frame/profile)

Hinges Strike Patch* Strike Plate# Lock


981.50.161

981.50.177 981.39.136

981.50.172

Hinges












Casting: Zinc Alloy



Deadbolt: Yes


No. of Keys: 5



1

2 3

Lock X 1 981.50.172


+

+


Hinge X 2 or 3 981.50.161

Hinge X 2 or 3 981.50.162

OR 1

2

3

Lock X 1 981.50.172


+

+

Hinge X 2 or 3 981.50.161

Hinge X 2 or 3 981.50.162

OR 1

2

3


Note: Both the hinges falling under the NOVA Series, can be installed in two ways, i.e. into the frame for an inset application or onto the frame for an overlay / offset application

1

2 3

Glass Cut-out



HINGE (981.50.161)

HINGE (981.50.162)


Hinge Dimensions Mounting Option 1:

Inset Application (into the frame/profile)


the frame/profile)

Glass Cut-out Hinge Dimensions Mounting Option 1:

Inset Application (into the frame/profile)


the frame/profile)

Article No. Description M.R.P (INR)

LINEAR SERIES

981.50.164 Square hinge 3,177/-

981.75.020 Square Hinge [NEW] 2,684/-

981.50.170 Square Lock 7,621/-

981.50.175 Square Strike Patch 2,702/-

981.50.17501 Square Strike Plate 265/-

ARC SERIES

981.50.163 Round hinge 4,193/-

981.75.010 Round Hinge [NEW] 2,684/-

981.50.171 Round Lock 7,411/-

981.50.176 Round Strike Patch 2,237/-

NOVA SERIES

981.50.161 Hinge 3,429/-

981.50.162 Hinge 3,473/-

981.50.172 Lock 11,939/-

981.50.177 Strike Patch 7,114/-

911.39.136 Strike Plate 932/-

Saddle Plate for DCL 21 Door Closer

Saddle Plate Dimensions

TECHNICAL SPECIFICATIONS

29

107.

5

38.5

931.84.90002

Material: Aluminium

Finish: Aluminium Anodised


Thickness: 10 mm

Other Specifications:

Compatible with Häfele’s StarTec DCL 21 Door Closer; Article No. - 931.84.129

Suitable for DIN right hand and DIN left hand

Three point holding for better grip and stability

Thick metal surface for increased fastening area & strength

Silicon sheets come pre-embedded to enable smoother fixing

Easy installation

Ordering Information:

Article Number: 931.84.90002

MRP (INR) 3,300/-

Mounting

Glass Door Sealing Systems


Minimum Gap: 2.5 mm

Maximum Gap: 7 mm

Length: 3000 mm

Colour: Transparent



GLASS LIP is an adhesive perimetric seal for glass doors and walls of simple and easy fitting. It can be applied with a template which allows a perfect positioning always in the center of the glass.

It is a soft transparent seal which can be quickly installed with an high strength transparent adhesive.

Application : Hinged glass doors

Fixing Type : High strength adhesive seal

Article Number: 950.40.00105 (Glass Thickness: 10 mm) 950.40.00106 (Glass Thickness: 12 mm)

Minimum Gap: 4 mm

Maximum Gap: 8 mm

Length: 2500 mm

Colour: Silver Anodised


Thickness: 10 and 12 mm

FRAME SEAL is a perimeter seal used to close the gap around the leafs of a glass door, without the use of glues and adhesives and with an immediate installation.

It consists of an anodized aluminum profile with anti-vibration soft seals on the inside. The patented system of the seal allows to compensate gaps from a minimum of 4 mm to a maximum of 8 mm.

Application : All types of glass doors

Fixing Type : Push / Pull on glass


Minimum Gap: 12 mm

Maximum Gap: 30 mm

Length: 3000 mm

Colour: Transparent



GLASS LIP SLIDE is an adhesive seal for sliding glass doors that provides for a simple and quick installation. It consists of a soft transparent seal with an adjustable single lip, which is installed on the fixed part of the sliding door to compensate for the gap created by the moving part.

Application : Hinged glass doors

Fixing Type : High strength adhesive seal

Article Number:

GLASS TO GLASS: 950.40.00107 (Glass Thickness: 10 mm) 950.40.00108 (Glass Thickness: 12 mm)

GLASS TO FLOOR: 950.40.00109 (Glass Thickness: 10 mm) 950.40.00110 (Glass Thickness: 12 mm)

Length: 2500 mm



Thickness: 10 and 12 mm

GLASS TO GLASS sealing system holds together two glass walls without the use of glues and adhesives. GLASS TO FLOOR is a system created for fixing glass walls to the floor. Both these systems consist of an anodized aluminum profile with anti-vibration soft seals on the inside that strongly clutch the glass walls. These systems also provide for better aesthetics and ease of assembly. Application : All types of glass walls

Fixing Type : Push / Pull on glass, with high-strength double-sided

adhesive tape between aluminium and floor

The seal lip can be shortened by each millimeter, by simply tearing off a part of the lip, to meet door gaps from 12 to 30 mm.


Length: 1030 mm


Components:

• Primary Aluminium Profile with Polypropylene Brush Seal

• Secondary Aluminium Profile • Rear Cover • End Caps

BRUSH SEAL is a door bottom seal which closes the gap between the glass door bottom and the floor. It can be installed on every traditional hinged door and also on pivot doors with concealed floor spring. The seal adapts to the floor spring plate with its self-levelling spring mechanism.


Length: 200 mm


Seal: Silicone Oil-impregnated Polypropylene Brush Seal

LOCKER BRUSH FOR PATCH is a simple way to close the gap between the glass door and the floor when the glass door is equipped with patch fittings. Application : All types of glass walls

Fixing Type : Push / Pull on glass, with high-strength

double-sided adhesive tape between aluminium and

floor

The fine hair of the brush allow to create a barrier against dust and insects without interfering with the functional operation of the door, even when the floor is not perfectly smooth.

Application : All types of glass doors

Fixing Type : High strength double-sided adhesive tape

Article No. Description M.R.P (INR)

Perimeter Sealing Systems

950.40.00101 GLASS LIP 3,436/-

950.40.00105 FRAME SEAL; Glass Thickness: 10 mm 7,405/-

950.40.00106 FRAME SEAL; Glass Thickness: 12 mm 7,405/-

Sliding Door Sealing System

950.40.00104 GLASS LIP SLIDE 4,532/-

Glass Wall Sealing Systems

950.40.00107 GLASS TO GLASS; Glass Thickness: 10 mm 7,229/-

950.40.00108 GLASS TO GLASS; Glass Thickness: 12 mm 7,447/-

950.40.00109 GLASS TO FLOOR; Glass Thickness: 10 mm 7,229/-

950.40.00110 GLASS TO FLOOR; Glass Thickness: 12 mm 7,447/-

Door Bottom Sealing Systems

950.40.00121 BRUSH SEAL 4,481/-

950.40.00112 LOCKER BRUSH FOR PATCH 1,147/-

Template and Cleaning Wipes

950.40.00113 GLASS CLEANING WIPES 197/-

950.40.00114 GLASS LIP TEMPLATE 908/-

NEW ADDITIONS : INTRODUCING TWO NEW GLASS DOOR HINGE … · This communication introduces two new...

Documents

Transcript of NEW ADDITIONS : INTRODUCING TWO NEW GLASS DOOR HINGE … · This communication introduces two new...