Evans PLT/PLHT Series Presslok Stainless Tube Fittings/Valves
NEW! 100K CYCLE STAINLESS STEEL CIRCULAR GATE VALVES
2
Cost-effective, Reliable, Made in the USA NEW! 100K CYCLE STAINLESS STEEL CIRCULAR GATE VALVES MDC’s 100K Cycle Gate Valves are a cost-effective alternative to our Million Cycle Gate Valve product line, offering the same reliability and quality you have come to depend on. Every valve is made in the USA to MDC’s rigorous quality standards. 100K Cycle Gate Valves have been designed for use in high and ultra-high vacuum applications with low cycle requirements (< 100,000 cycles until service). These valves are ideal for isolation of cryopumps, turbo pumps, ion pumps, and other applications requiring clean, low outgassing valves. Metal-sealed Del-Seal™ CF flanges provide compatibility with UHV systems when pressure ranges approximate 1 x 10 -10 Torr (mbar) and higher bakeout temperatures of 200°C are needed. 100K Cycle Gate Valves can be configured for higher temperatures, come in a range of sizes from 5/8” (DN16) to 20” (DN500), and are available in manual or pneumatic actuator configurations. Valve flange options include standard KF, ISO, Del-Seal™ CF or custom. MDC VACUUM PRODUCTS, LLC 30962 Santana Street Hayward, CA 94544 USA Phone: 510.265.3500 | Toll Free: 800.443.8817 [email protected] | www.mdcvacuum.com MDC Vacuum Products is proud to introduce our new 100K Cycle Stainless Steel Circular Gate Valve product line.
Transcript of NEW! 100K CYCLE STAINLESS STEEL CIRCULAR GATE VALVES
Cost-effective, Reliable, Made in the USA
NEW! 100K CYCLESTAINLESS STEEL CIRCULAR GATE VALVES
MDC’s 100K Cycle Gate Valves are a cost-effective alternative to our Million Cycle Gate Valve product line, offering the same reliability and quality you have come to depend on. Every valve is made in the USA to MDC’s rigorous quality standards. 100K Cycle Gate Valves have been designed for use in high and ultra-high vacuum applications with low cycle requirements (< 100,000 cycles until service).
These valves are ideal for isolation of cryopumps, turbo pumps, ion pumps, and other applications requiring clean, low outgassing valves. Metal-sealed Del-Seal™ CF flanges provide compatibility with UHV systems when pressure ranges approximate 1 x 10-10 Torr (mbar) and higher bakeout temperatures of 200°C are needed. 100K Cycle Gate Valves can be configured for higher temperatures, come in a range of sizes from 5/8” (DN16) to 20” (DN500), and are available in manual or pneumatic actuator configurations. Valve flange options include standard KF, ISO, Del-Seal™ CF or custom.
MDC VACUUM PRODUCTS, LLC30962 Santana Street Hayward, CA 94544 USAPhone: 510.265.3500 | Toll Free: 800.443.8817
[email protected] | www.mdcvacuum.com
MDC Vacuum Products is proud to introduce our new 100K Cycle Stainless Steel Circular Gate Valve product line.
100K CYCLE STAINLESS STEEL CIRCULAR GATE VALVES
MDC VACUUM PRODUCTS, LLC30962 Santana Street Hayward, CA 94544 USAPhone: 510.265.3500 | Toll Free: 800.443.8817
[email protected] | www.mdcvacuum.com
FEATURES• Rated for 100,000 Cycles Until Service (Dependent on Application)• HV and UHV with Stainless Steel Body and Internal Components• Sizes from 5/8” (DN16) To 20”(DN500)• Manual and Pneumatic Actuation• Solenoid Included with All Pneumatic Valves (120V AC or 24V DC Standard, Other Voltages Available Upon Request)• Reed Switch Position Indicator Included with Pneumatic Valves > 5/8” (Micro Switch Available Upon Request)• Stainless Steel Welded Bellows• Standard KF, ISO, Del-Seal™ CF or Custom Flange Options• High Temperature Options Up to 250°C• Positive Mechanical Lock• Easily Customizable to Work with Almost Any Application
Materials Bakeout Temperature (w/out solenoid)Valve Body and Gate 304 stainless steel Elastomer Sealed Bonnet 150°C
Welded Bellows AM-350 stainless steel Metal Sealed Bonnet:• Valve Open• Valve Closed
200°C150°C
Bonnet / gate seals:• HV• UHV
Viton® elastomerOFHC copper / Viton® elastomer
Actuator:• Manual• Pneumatic
60°C60°C
Vacuum MechanismPressure Range:• HV• UHV
1 x 10-9 mbar1 x 10-10 mbar
Actuation:• Manual• Pneumatic Air Service
Hand crank80 psig (5.5 bar)
Helium Leak Rate < 2 x 10-9 mbar l/s Solenoid:• Supplied Voltage• Optional Voltage
4.0 Watts120V AC, 50/60 Hz24, 200, 240 VAC 50/60 Hz or 12, 24V DC
Differential Pressure 1 bar in either direction Position Indicator, max. 115 VAC or 28 VDC, 20 mA
Maximum Δ pressure before opening ≤ 30 mbar
Mounting Position Cycles Until ServiceAny 100,000 (application dependent)
SPECIFICATIONS
2D & 3D DRAWINGS AVAILABLE ON OUR WEBSITE!
ORDER ONLINE!
2-1/2” ID (DN63mm) Del-Seal™ CF Flanged Pneumatic Gate Valve with Custom Roughing Port Option
