Neutrik NE8FDY-C6 Assembly Instructions
2
B A E 40 mm Twist the screen 8-7 4-5 6-3 2-1 8-7 4-5 6-3 2-1 S-FTP SF-UTP F-UTP 8-9 mm C D 1. 2. 3. 4. 5. 2. Trimming! 1. Position the cable! Cable preparation Shielding Cable pairs separation Cable mount Position wires acc. label Cable tie ASSEMBLY INSTRUCTION NE8FDY-C6 etherCON Receptacle | Page 1 F Fix wires
Transcript of Neutrik NE8FDY-C6 Assembly Instructions
B
A
E
40
mm
Twist thescreen
8-7 4-5
6-3
2-1
8-7
4-5
6-3
2-1
S-FTP SF-UTP F-UTP
8-9
mm
C D
1. 2. 3. 4. 5.
2. Trimming!
1. Position thecable!
Cable preparation
Shielding
Cable pairs separation Cable mount
Position wires acc. label
Cable tie
ASSEMBLY INSTRUCTION
NE8FDY-C6 etherCON Receptacle|
Page 1
F Fix wires
G H
Break out!
Cut!
K
I J
Pressdown!
Snap in
Hang up!
Note for Right-Angle Version
Working steps same as above.
Except:
Step B - References
Step G - The cable outlet must not be
interrupted.
to step B and bend
the reinforcement metal right
angle below.
1.
2.
Cover assembly Connect the screen
Assembly the adapter Grounding option
Assembly the chassis
Please fix the cable additionally.Attention: Before assembly secure the housing in the device.
B
G
Insert until itsnaps in
Insert contact only if screen shouldbe connected to front panel
L Finish
Draft. Nr.: BDA 188 Update: 13.08.2009/ 3102M1561 I I Data subject to change without prior notice. 2009 NEUTRIK . ALL RIGHTS RESERVED.© ®
ASSEMBLY INSTRUCTION NE8FDY-C6I
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
T: F:
T: F:
T: F:
( ) T: F:
LI
CH
USA
UK
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
www.neutrik.com
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH T: F:
T: F:
T: F:
Ltd. T: F:
DE / NL / AT/DK
FR
JP
HK
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052Hong Kong
Page 2
