NETWRIX ALL IN-ONE · PDF fileNETWRIX ALL-IN-ONE SUITE OVERVIEW 1.1. Key Features and Benefits...
Transcript of NETWRIX ALL IN-ONE · PDF fileNETWRIX ALL-IN-ONE SUITE OVERVIEW 1.1. Key Features and Benefits...
NETWRIX ALL-IN-ONE SUITE
FEATURES AND REQUIREMENTS
Copyright © 2013 Netwrix Corporation. All Rights Reserved.
August 2013
Product Version: 4.0
Netwrix All-in-One Suite Features and Requirements
Page 2 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Legal Notice
The information in this publication is furnished for information use only, and does not constitute a
commitment from Netwrix Corporation of any features or functions discussed. Netwrix Corporation
assumes no responsibility or liability for the accuracy of the information presented, which is subject
to change without notice.
Netwrix is a registered trademark of Netwrix Corporation. The Netwrix logo and all other Netwrix
product or service names and slogans are registered trademarks or trademarks of Netwrix
Corporation. Active Directory is a trademark of Microsoft Corporation. All other trademarks and
registered trademarks are property of their respective owners.
Disclaimers
This document may contain information regarding the use and installation of non-Netwrix products.
Please note that this information is provided as a courtesy to assist you. While Netwrix tries to
ensure that this information accurately reflects the information provided by the supplier, please refer
to the materials provided with any non-Netwrix product and contact the supplier for confirmation.
Netwrix Corporation assumes no responsibility or liability for incorrect or incomplete information
provided about non-Netwrix products.
© 2013 Netwrix Corporation.
All rights reserved.
Netwrix All-in-One Suite Features and Requirements
Page 3 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Table of Contents
1. NETWRIX ALL-IN-ONE SUITE OVERVIEW ....................................................... 4
1.1. Key Features and Benefits .......................................................... 4
1.1.1 .. Change Auditing Solutions .................................................. 4
1.1.2 .. Identity Management Solutions ............................................ 5
1.2. Netwrix All-in-One Suite Modules .................................................. 6
1.3. Netwrix All-in-One Suite Modules Overview ...................................... 6
1.4. Licensing Information ............................................................... 8
2. SYSTEM REQUIREMENTS ....................................................................... 9
2.1. Hardware Requirements ............................................................ 9
2.2. Software Requirements ............................................................. 9
2.3. Supported Microsoft SQL Server Versions ........................................ 10
2.4. Supported Target Environments................................................... 11
A APPENDIX: SUPPORTING DATA ............................................................... 13
A.1 How to Install IIS on Different Windows Versions .............................. 13
A.2 How to Install GPMC on Different Windows Versions .......................... 14
A.3 Related Documentation ............................................................ 15
Netwrix All-in-One Suite Features and Requirements
Page 4 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
1. NETWRIX ALL-IN-ONE SUITE OVERVIEW
1.1. Key Features and Benefits
Netwrix All-in-One Suite 4.0 combines all Netwrix products into one integrated solution aimed
at sustaining security and compliance of your IT infrastructure. The suite contains solutions
for configuration and change auditing and identity management that facilitate and streamline
most administrative tasks of an IT department in any organization.
1.1.1 Configuration and Change Auditing Solution
Netwrix All-in-One Suite includes 4.0 includes Netwrix Auditor 5.0, an integrated solution for
automated auditing of an IT infrastructure. It collects audit data from audited systems and
applications, and translates it into easy-to-understand reports on changes and point-in-time
configuration of the following components of your environment:
Active Directory
Group Policy
Windows-based file servers
EMC VNX/VNXe/Celerra appliances
NetApp Filer
Microsoft Exchange Server
Windows servers
Microsoft SharePoint
Microsoft SQL Server
VMware infrastructure
Unlike the traditional log management solutions (such as, for example Security Information
and Event Management (SIEM) systems), Netwrix Auditor makes it very easy to get relevant
answers to the key questions: who changed what, when and where, including the before and
after values for each change. The product generates daily Change Summaries that are
emailed to the specified recipients and contain a list of all changes that occurred in the last
24 hours. Detailed reports based on SQL Server Reporting Services (SSRS) with various filters
and output formats can be viewed through a web-browser, or in the Netwrix Auditor console.
Netwrix Auditor helps automate and secure the following tasks:
See WHO changed WHAT, WHEN and WHERE: the product detects all changes
throughout an entire IT infrastructure and generates audit reports in a user-
friendly format.
Sustain compliance: all changes made to your IT infrastructure can be archived
and stored for years, enabling you to generate reports for your auditors and
providing a full audit trail. Dozens of report templates streamline compliance to
HIPAA, SOX, PCI, GLBA, FISMA, and may other regulations.
Revert unwanted changes: the product includes the Active Directory Object
Restore tool, which enables attribute-level AD object restore without rebooting a
domain controller and touching the rest of the AD structure, and goes beyond the
standard tombstone capabilities.
Get notified immediately on critical changes: you can configure Real-Time Alerts
to warn you when changes are made to sensitive resources, and, thus, respond to
critical events and protect enterprise-wide integrity from damage.
Netwrix All-in-One Suite Features and Requirements
Page 5 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Integrate with 3rd-party SIEM systems: Netwrix Auditor can be integrated with
multiple SIEM systems (including SCOM) to let you manage audit data in your usual
way, but with improved performance and increased reliability of collected audit
data.
Consolidate Windows and syslog event logs: the product allows you to collect
Windows event logs and syslog events across the network and store them centrally
in a compressed format.
1.1.2 Identity Management Solutions
Netwrix identity management solutions help organizations solve their most pressing password
management and account management issues. They help automate and secure the following
tasks:
Logon auditing: Automatic consolidation, archiving and reporting on successful
and failed logon events from all Active Directory domain controllers, servers and
workstations.
Restore and reset forgotten passwords: self-service password management
eliminates a great number of help-desk calls and eases implementation of
password policies.
Notify remote users on password expiration: remote (VPN, OWA), as well as
Linux and Mac desktops users, who do not have password change prompts, can be
notified automatically about expiring passwords by email.
Manage account lockouts: account lockout detection, investigation of the root
cause and automated resolution.
De-provisioning of inactive accounts: inactive users accounts can be tracked and
deactivated automatically based on their last logon time.
Netwrix All-in-One Suite Features and Requirements
Page 6 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
1.2. Netwrix All-in-One Suite Target Systems and Solutions
The table below lists the target systems and applications audited by Netwrix Auditor, and the
list of Identity Management module included into Netwrix Netwrix All-in-One Suite 4.0
contains the following modules:
Table 1: Netwrix All-in-One Suite Target Systems and Solutions
Netwrix Auditor Target Systems Identity Management Solutions
Active Directory
Exchange Servers
Group Policy
File Servers (including EMC VNX/VNXe/Celerra and NetApp Filer appliances)
SQL Servers
SharePoint
VMware
Generic Events
Inactive Users Tracking
Password Expiration Alerting
Mailbox Access
+ video auditing for the systems and applications that do not produce logs
Netwrix Account Lockout Examiner 4.1
Netwrix Password Manager 6.5
Netwrix Inactive Users Tracker 3.0
Netwrix Password Expiration Notifier 3.3
1.3. Netwrix All-in-One Overview
Table 2: Configuration and Change Auditing Overview and Table 3: Identity Management
Modules Overview below provide a short description of the Netwrix Auditor functionality for
audit of different target systems and applications:
Table 2: Configuration and Change Auditing Overview
Audited System Description
Active Directory Netwrix Auditor tracks and reports on all changes made to an AD domain, including the Domain, Configuration and Schema partitions. It can also be configured to notify you immediately if critical changes are detected. The product also provides a built-in Active Directory Object Restore tool that allows reverting unwanted changes to AD objects down to the attribute level.
EMC VNX/VNXe/Celerra Netwrix Auditor tracks and reports on all changes made to EMC VNX/VNXe/Celerra storage appliances, including files, folders and permissions, as well as failed and successful access attempts.
Generic Events Netwrix Auditor allows automatic event log consolidation, alerting and archiving. It collects Windows event logs and syslog events from multiple computers across the network, stores them centrally in a compressed format, and enables convenient analysis of event log data and rich reporting capabilities.
Exchange Servers Netwrix Auditor tracks and reports on all changes made to Microsoft Exchange Servers configuration and permissions.
File Servers Netwrix Auditor tracks and reports on all changes made to Windows file servers, including files, folders, shares and permissions, as well as failed and successful access attempts.
Group Policy Netwrix Auditor tracks and reports on all changes made to Group Policy configuration and Group Policy Objects and links.
NetApp Filer Netwrix Auditor tracks and reports on all changes made to NetApp Filer
Netwrix All-in-One Suite Features and Requirements
Page 7 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Audited System Description CIFS shares.
Mailbox Access Netwrix Auditor tracks all non-owner mailbox access events in an Exchange organization, and immediately notifies users whose mailboxes have been accessed by non-owners.
Windows Servers An auditing solution that tracks and reports on all changes made to your servers configuration, including hardware devices, drivers, software, services, applications, networking settings, registry settings and more.
SharePoint Netwrix Auditor tracks and reports on all changes made to SharePoint farms, servers and sites, as well as their settings and permissions.
SQL Servers Netwrix Auditor tracks and reports on all changes made to your SQL server(s) configuration and database content.
VMware Netwrix Auditor tracks and reports on all changes made to your ESX servers, folders, clusters, resource pools, virtual machines and their hardware.
User Session Activity Netwrix Auditor captures a video of users’ activity on monitored computers and writes a detailed activity log, which helps analyze how changes to your IT infrastructure are made. The product provides detailed user activity reports, moreover, video records can be integrated into change reports on other audited systems.
Table 3: Identity Management Modules Overview
Module Description
Netwrix Account Lockout Examiner
A client-server application that runs as a service and allows efficient handling of account lockout issues. The product performs the following tasks:
Monitors Security event logs on specific domain controllers and detects account lockouts in real-time.
Automatically notifies specified recipients on account lockouts.
Unlocks accounts on the domain controllers where they were locked (for example, when the service account has been updated, or a network drive has been remapped) and allows Active Directory to replicate this change to other domain controllers.
Examines account lockouts for possible lockout reasons and displays examination results in a user-friendly form.
Netwrix Inactive Users Tracker
A tool for automated tracking of inactive user and computer accounts. The product performs the following tasks:
Checks domains or specific organizational units by inquiring all domain controllers, and notifies managers and administrators about accounts that have been inactive for a specified number of days.
Automatically deactivates inactive accounts by settings a random password, disabling, deleting or moving them to a specified organizational unit.
Netwrix Password Expiration Notifier
Checks which domain accounts and/or passwords are to expire in a specified number of days and sends notifications to users via email or text messages (SMS). It also generates summary reports that can be delivered to system administrators and/or users managers. The product also allows checking the effects of a password policy change before applying it to the managed domain.
Netwrix Password Manager A tool for automated password management. The product does the following:
Provides end-users with self-service web access to common password management tasks.
Allows help-desk operators to manage user accounts and view
Netwrix All-in-One Suite Features and Requirements
Page 8 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Module Description reports on their status through a simple web interface.
Allows administrators to enforce restrictions on what kind of passwords can be used, and to apply security policies and identity verification procedures to the managed domain(s).
For detailed information and instructions on how to install, configure and use the products
forming Netwrix All-in-One Suite, refer to the corresponding documentation (see Appendix
A.3 Related Documentation for links, or download a complete documentation package from
Netwrix All-in-One Suite website page).
1.4. Licensing Information
When you install Netwrix All-in-One Suite 4.0, the Enterprise Editions of all of its modules are
installed.
The Enterprise Editions of all Netwrix products can be evaluated free of charge for 20 days.
For an unlimited use of the modules integrated in Netwrix All-in-One Suite, you must request
the corresponding licenses from Netwrix.
Netwrix All-in-One Suite Features and Requirements
Page 9 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
2. SYSTEM REQUIREMENTS
2.1. Hardware Requirements
Before installing Netwrix All-in-One Suite 4.0, make sure that your system meets the
following hardware requirements:
Table 4: Netwrix All-in-One Suite Hardware Requirements
Minimum Recommended
Processor Intel or AMD 32 bit, 2GHz Intel or AMD 64 bit, 3GHz, 4 Core
Memory 2 GB RAM 8 GB RAM
Disk Space
50 M for each component
NOTE: More space is required for Audit Archive, the local repository of audit data.
2 drives with a total of 50 GB free space
2.2. Software Requirements
Table 5: Netwrix Auditor Software Requirements and Table 6: Identity Management Modules
Software Requirements below list the software requirements for the Netwrix All-in-One Suite
components. The General Requirements section lists the requirements that are common for
all Netwrix change auditing or identity management products included in Netwrix All-in-One
Suite. Other sections list the requirements specific to separate products in addition to the
general requirements. Make sure that this software has been installed on the corresponding
computers before proceeding with the installation.
Table 5: Netwrix Auditor Software Requirements
Audited System Required Software
General Requirements
Windows XP SP3 or above (both 32-bit and 64-bit systems)
.NET Framework 3.5
Windows Installer 3.1 or above
IIS 5.1 or above* (IIS 7.0 requires IIS 6 Management Compatibility – all components)
Note: Only required if you are going to use SQL Server 2005 to store audit data.
Exchange Servers audit
Windows PowerShell 2.0
Note: Only required if your monitored domain has an Exchange organization running Microsoft Exchange Server 2010 or 2013.
Group Policy audit Group Policy Management Console**
* For detailed instructions on how to install IIS, refer to Appendix A.1 How to Install IIS on Different Windows Versions.
** For detailed instructions on how to install Group Policy Management Console
(GPMC), refer to Appendix A.2 How to Install GPMC on Different Windows Versions.
Table 6: Identity Management Modules Software Requirements
Netwrix Product Required Software
General Requirements Windows XP SP3 or above
.NET Framework 3.5 SP1
Netwrix All-in-One Suite Features and Requirements
Page 10 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Windows Installer 3.1 or above
Netwrix Account Lockout Examiner Help-Desk Portal:
IIS 6.0 or above*
Netwrix Inactive Users Tracker
Netwrix Password Expiration Notifier
Microsoft Management Console 3.0 or above
Note: Microsoft Management Console is included in the Windows XP or above operating systems.
Netwrix Password Manager Core Service and Web Application:
IIS 6.0 or above*
Microsoft Internet Explorer 6.0 or later / Mozilla FireFox 2.0 or later / Apple Safari 2.0 or later / Google Chrome 4.0 or later
Password Manager Client:
Microsoft Internet Explorer 6.0 or later
* For detailed instructions on how to install IIS, refer to Appendix A.1 How to
Install IIS on Different Windows Versions.
2.3. Supported Microsoft SQL Server Versions
Microsoft SQL Server provides the Reporting Services that enable creating, viewing and
managing reports based on data stored in a local SQL Server database. Netwrix Auditor uses
these Reporting Services to generate reports on changes to the monitored environment.
To use the Reports functionality, Microsoft SQL Server must be installed on a computer that
can be accessed by Netwrix Auditor.
The following Microsoft SQL Server versions are supported:
Table 7: Supported Microsoft SQL Server Versions
Version Edition
SQL Server 2005 Express Edition with Advanced Services (SP3 or above)
Standard or Enterprise Edition
SQL Server 2008 Express Edition with Advanced Services
Standard or Enterprise Edition
SQL Server 2008 R2 (recommended) Express Edition with Advanced Services
Standard or Enterprise Edition
SQL Server 2012 Express Edition with Advanced Services
Standard or Enterprise Edition
Microsoft SQL Server is not included in the product installation package and must be installed
manually or automatically through the Reports Configuration wizard. This wizard
automatically installs SQL Server Express with Advanced Services and configures the Reporting
Services. SQL server version installed through the wizard depends on the operating system
your computer is running (for details, refer to the following Netwrix Knowledge Base article:
Which SQL Server versions can be installed automatically via Netwrix Management Console).
For your convenience, we have provided instructions on the manual installation of Microsoft
SQL Server with configuration specific for the Reporting Services to function properly. Refer
to the following Netwrix Technical Article for detailed instructions: Installing Microsoft SQL
Server and Configuring the Reporting Services. For full installation and configuration details,
refer to the documentation provided by Microsoft.
Note: If you install the product on a read-only domain controller, SQL Server
installation will fail (both manual or automatic through the Reports Configuration
Netwrix All-in-One Suite Features and Requirements
Page 11 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
wizard). This is a known issue, for details refer to the following Microsoft
Knowledge Base Article: You may encounter problems when installing SQL Server
on a domain controller. To fix the issue, install the product on a different
computer, or install SQL Server manually on a different computer that can be
accessed by Netwrix Auditor.
2.4. Supported Target Environments
Table 8: Supported Target Systems and Table 9: Identity Management Modules Supported
Target Environments below list the target environments audited by Netwrix products included
in Netwrix All-in-One Suite 4.0:
Table 8: Supported Target Systems
Target System Supported Target Environments
Active Directory
Active Directory (domain and forest functional levels)
Domain controller OS versions:
o Windows Server 2000 SP4
o Windows Server 2003 SP2
o Windows Server 2003 R2 SP2
o Windows Server 2008 SP2
o Windows Server 2008 R2 SP1
EMC VNX/VNXe/Celerra
EMC VNX CIFS shares
EMC VNXe CIFS shares
EMC Celerra CIFS shares
Generic Events
Windows 2000 or above
Red Hat Enterprise Linux 5, Ubuntu 11, Ubuntu Server 11
Any Linux/Unix system using Syslog
Exchange Servers
Microsoft Exchange Server 2003
Microsoft Exchange Server 2007
Microsoft Exchange Server 2010
Microsoft Exchange Server 2013
File Servers Windows 2000 and above file servers
Group Policy
Active Directory (all domain and forest functional levels)
Domain controller OS versions:
o Windows Server 2000 SP4
o Windows Server 2003 SP2
o Windows Server 2003 R2 SP2
o Windows Server 2008 SP2
o Windows Server 2008 R2 SP1
NetApp Filer NetApp Filer CIFS shares
Mailbox Access
Microsoft Exchange 2003
Microsoft Exchange 2007
Microsoft Exchange 2010
Windows Servers Computers running Windows XP and above
SharePoint
Microsoft SharePoint 2007
NOTE: Support for Microsoft SharePoint 2010 is coming soon!
Netwrix All-in-One Suite Features and Requirements
Page 12 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
SQL Servers
Microsoft SQL Server 2000
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
VMware
Platforms:
vSphere 4.0 – 5.1
Hosts
ESXi 3.5 – 5.1
ESX 3.0 – 4.1
SW
vCenter Server 4.0 – 5.1
Virtual Center 2.5
Table 9: Identity Management Modules Supported Target Environments
Netwrix Product Supported Target Environments
Netwrix Account Lockout Examiner Active Directory (all domain and forest functional
levels)
Domain controller OS versions:
o Windows Server 2000 SP4
o Windows Server 2003 SP2
o Windows Server 2003 R2 SP2
o Windows Server 2008 SP2
o Windows Server 2008 R2 SP1
Netwrix Inactive Users Tracker
Netwrix Password Expiration Notifier
Netwrix Password Manager
Netwrix All-in-One Suite Features and Requirements
Page 13 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
A APPENDIX: SUPPORTING DATA
A.1 How to Install IIS on Different Windows Versions
This section provides detailed instructions on how to install Internet Information Services (IIS)
on different Windows versions.
It contains the following procedures:
To install IIS on Windows XP
To install IIS on Windows 2003
To install IIS on Windows 7 / Windows Vista
To install IIS on Windows 2008 / 2008 R2
Procedure 1. To install IIS on Windows XP
1. Navigate to Start Settings Control Panel Add or Remove Programs.
2. Click on Add/Remove Windows Components.
3. Select Internet Information Services (IIS) and click OK to install this component.
Procedure 2. To install IIS on Windows 2003
1. Navigate to Start Settings Control Panel Add or Remove Programs.
2. Click on Add/Remove Windows Components.
3. Double-click Application Server and select Internet Information Services (IIS). Click OK to install this component.
Procedure 3. To install IIS on Windows 7 / Windows Vista
1. Navigate to Start Control Panel Programs and Features.
2. Double-click Turn Windows features on or off.
3. Select Internet Information Services.
4. Enable the following features prior to the installation:
IIS 6 Management Compatibility
ASP extension
Windows Integrated Authentication
Anonymous Authentication
ASP.NET
Procedure 4. To install IIS on Windows 2008 / 2008 R2
1. Navigate to Start Control Panel Programs and Features.
2. Double-click Turn Windows features on or off.
3. Click Add Roles, then Server Roles and select Web Server (IIS).
4. Enable the following features prior to the installation:
IIS 5 Management Compatibility
ASP extension
Netwrix All-in-One Suite Features and Requirements
Page 14 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
Windows Integrated Authentication
Anonymous Authentication
ASP.NET
Note: For detailed instructions on how to install the Web Server role, refer to the
following article: install the Web Server role, refer to the following article:
Installing the Web Server Role.
A.2 How to Install GPMC on Different Windows Versions
This section provides detailed instructions on how to install Group Policy Management Console
(GPMC) on different Windows versions.
It contains the following procedures:
To install GPMC on Windows XP / 2003
To install GPMC on Windows 7 / Windows Vista
To install GPMC on Windows 2008 / 2008 R2
Procedure 5. To install GPMC on Windows XP / 2003
Download and install Group Policy Management Console.
Procedure 6. To install GPMC on Windows 7 / Windows Vista
1. Download and install Remote Server Administration Tools that includes Group Policy Management Console.
2. Navigate to Start Control Panel Programs and Features Turn Windows features on or off.
3. Navigate to the Remote Server Administration Tools node and select Group Policy Management Tools.
4. Click Install to install this feature.
Procedure 7. To install GPMC on Windows 2008 / 2008 R2
1. Navigate to Start Control Panel Programs and Features Turn Windows features on or off.
2. In the Server Manager dialog, select Features in the left pane, click Add Features and select the Group Policy Management feature.
3. Click Install to enable this feature.
Netwrix All-in-One Suite Features and Requirements
Page 15 of 15
Copyright © 2013 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this document? www.netwrix.com/feedback
A.3 Related Documentation
This section provides links to documentation published to support All-in-One Suite 4.0. You
can also download a complete documentation package from Netwrix All-in-One Suite website
page.
Table 10: Netwrix All-in-One Suite Modules Documentation Links
Module Name Documentation Link
Netwrix Auditor
Active Directory Product Documentation
Exchange Servers Product Documentation
Generic Events Product Documentation
EMC VNX/VNXe/Celerra Product Documentation
File Servers Product Documentation
Group Policy Product Documentation
NetApp Filer Product Documentation
Mailbox Access Product Documentation
Windows Servers Product Documentation
SharePoint Product Documentation
SQL Servers Product Documentation
VMware Product Documentation
User Session Activity Product Documentation
Identity Management Modules
Netwrix Account Lockout Examiner Product Documentation
Netwrix Inactive Users Tracker Product Documentation
Netwrix Password Expiration Notifier Product Documentation
Netwrix Password Manager Product Documentation