System configuration example for temperature measurement

Real-time data monitoring on GUI or customer monitoring system

Recording in database

Sensor placed on the surface of the

monitored equipment, including in-motion

parts or inaccessible places

Wireless temperature measurement with

SAW sensor

Remote RF interrogation

Up to 5 m(1) Analog or digitallink

Wireless linkif needed(2)

(1) Dependent on RF environment & system components.(2) Wi-Fi, ZigBee or similar wireless communication protocols can be implemented for Wireless Sensor Networks.

SAW sensor response

Data acquisition & temperature computation

from frequency

SAW SensorsProduct Porfolio

Measurement solutions with wireless passive sensorsSurface Acoustic Wave (SAW) technology

Wireless passive sensors Robust & stableMaintenance-free

Embeddable

Condition monitoring at the heart of the equipment, even on moving parts

Expert team for custom developments

Technical support Field-Engineering

Strong & wide-scope IP, unique-patented sensor

structure, patented interrogation methods

Innovative sensors forHigh-value applications

Your best partner

Rolls temperature monitoring

Cookware temperature controlWireless food probes

Switchgear & all electrical equipment remote monitoring

Real-time engine/generator monitoring on rotor

Sensor reference Sensor chip reference(standard)

Measurement range Mounting Dimensions (LxWxH in mm) Fixation Antenna type Recommended environment

without antenna with antenna without antenna if not integrated- TSA D003 TSE AS10 -15°C, 165°C Antenna mounted 97.2x82x17.5 2 screws Integrated PIFA Metallic ground plane

TSM G100 to 105* TSA G100 to 105 TSE F160 to 165 -15°C, 165°C Stainless steel thermowell 124x27 - probe Ø 9 1/2" G male screw AN D071 Metallic ground plane

- TSA H100 to 105 TSE F160 to 165 -15°C, 165°C Stainless steel thermowell 174x27 - probe Ø 9 1/2” G male screw Integrated high-performance monopole Metallic ground plane

- TSA G130 to 135 TSE F160 to 165 -15°C, 165°C Stainless steel screw 60x26 - radome Ø 16 M18 screw Integrated monopole Metallic ground plane

TSM G160 to 165* TSA G160 to 165 TSE F160 to 165 -15°C, 165°C Aluminum fixture 26x16x12.6 2 clamps or 2 screws or glue AN D071 Metallic ground plane

- TSA H160 to 165** TSE F160 to 165 -15°C, 165°C Aluminum fixture H 58.4 - base Ø 35.5 2 screws or glue Integrated high-performance monopole Metallic ground plane

TSM G190 to 195* TSA G190 to 195 TSE F160 to 165 -15°C, 165°C Aluminum fixture 26x16x12.6 2 magnets AN D071 Metallic ground plane

- TSA H190 to 195** TSE F160 to 165 -15°C, 165°C Aluminum fixture H 58.4 - base Ø 35.5 2 screws or 2 magnets Integrated high-performance monopole Metallic ground plane

- TSA G110 to 115 TSE F160 to 165 -15°C, 165°C Resin-molded ceramic PCB 175x6x2.7 Embedded or glued Integrated helicoidally wired dipole Dielectric material - non-metallic environment

Sensor reference Measurement range Accuracy

(standard system)Dimensions

(LxWxH in mm)Frequency band over

measurement range (MHz) ISMResonator 1 Resonator 2

TSE AS10 -15°C, 165°C +/-2°C 5x5x1.5 433,16 - 433,84 433,84 - 434,68 Yes

TSE F160 -15°C, 165°C +/-2°C 5x5x1.5 430,44 - 431,21 431,21 - 432,21 No

TSE F161 -15°C, 165°C +/-2°C 5x5x1.5 433,16 - 433,72 433,72 - 434,68 Yes

TSE F162 -15°C, 165°C +/-2°C 5x5x1.5 435,39 - 436,19 436,19 - 437,15 No

TSE F163 -15°C, 165°C +/-2°C 5x5x1.5 437,91 - 438,69 438,69 - 439,66 No

TSE F164 -15°C, 165°C +/-2°C 5x5x1.5 440,40 - 441,18 441,18 - 442,14 No

TSE F165 -15°C, 165°C +/-2°C 5x5x1.5 442,92 - 443,70 443,70 - 444,65 No

TSE F180 -15°C, 165°C +/-2°C 9.8x3x1.5 430,44 - 431,21 431,21 - 432,21 No

TSE F181 -15°C, 165°C +/-2°C 9.8x3x1.5 433,16 - 433,72 433,72 - 434,68 Yes

TSE F182 -15°C, 165°C +/-2°C 9.8x3x1.5 435,39 - 436,19 436,19 - 437,15 No

TSE F183 -15°C, 165°C +/-2°C 9.8x3x1.5 437,91 - 438,69 438,69 - 439,66 No

TSE F184 -15°C, 165°C +/-2°C 9.8x3x1.5 440,40 - 441,18 441,18 - 442,14 No

TSE F185 -15°C, 165°C +/-2°C 9.8x3x1.5 442,92 - 443,70 443,70 - 444,65 No

TSE G043 -10°C, 50°C +/-0.5°C 5x5x1.5 432,16 - 433,97 433,97 - 434,60 Yes

TSE G044 -40°C, 50°C +/-0.5°C 5x5x1.5 432,70 - 433,97 433,97 - 434,70 No

TSE F143 0°C, 165°C +/-0.5°C 9.8x3x1.5 432,25 - 433,40 433,40 - 435,10 No

TSE G144 0°C, 165°C +/-0.5°C 5x5x1.5 432,25 - 433,40 433,40 - 435,10 No

TSE F043 -196°C, +47°C (77K, 320K) Application dependant 5x5x1.5 431,00 - 433,97 433,97 - 434,70 No

Wireless passive SAW temperature sensors

The chips used in standard products are TSE AS10 or TSE F160 to 165. Other chips can be mounted in standard packaging upon request. Cryogenic sensor chip TSE F043 is only available in customized packaging with customized antenna.All sensor chips can be mounted in customized packaging according to your specifications.

*Compatible with various types of antennas through SMA connector. ** Available in voltage compatible version

(up to 245 kV, 4000 A, -15°C, 150°C, ref -V).

If our standard sensors do not cover your need, SENSeOR’s engineers will help you build a customized optimized system. For custom development of pressure sensors, contact us.

Temperature systemsSystem reference Sensor reference Transceiver reference Measurement range Accuracy Refresh rate Interrogation distance *** ISM Rotation Options

T01 - rev B 1 TSA G161 WR C001 -15°C, 165°C +/-2°C 40 Hz - 25 ms 5 cm - 200 cm Yes Yes T01S - rev B with 1 TSA G131 / T01T - rev B with 1 TSA G101

T01A - rev B with analog output 1 TSA G161 WR C001 -15°C, 165°C +/-3°C 5 Hz - 200 ms 5 cm - 200 cm Yes Yes T01AS - rev B with 1 TSA G131 / T01AT - rev B with 1 TSA G101

T01 - rev C 1 TSA H161 WR C001 -15°C, 165°C +/-2°C 40 Hz - 25 ms 5 cm - 400/500 cm Yes Yes -

T02 - rev B 1 TSA G161 WR E010 -15°C, 165°C +/-2°C 1 Hz - 1 s 3 cm - 90 cm Yes No -

T04 - rev B 4 TSA G161 WR D001 -15°C, 165°C +/-2°C 3 Hz - 333 ms 10 cm - 200 cm Yes Yes T04S - rev B with 4 TSA G131 / T04T - rev B with 4 TSA G101

T04 - rev C 4 TSA H161 WR D001 -15°C, 165°C +/-2°C 3 Hz - 333 ms 100 cm - 250 cm Yes Yes -

T06 - rev B 6 sensors (TSA G160 to TSA G165) WR D005 -15°C, 165°C +/-2°C 5 Hz - 200 ms 5 cm - 90 cm No Yes -

T06 - rev C 6 sensors (TSA H160 to TSA H165) WR D005 -15°C, 165°C +/-2°C 5 Hz - 200 ms 15 cm - 300/400 cm No Yes -

*** See recommended configurations in system documentations.

T02 - rev BT01 - rev C

TSA H100

5x5 mm chip

Temperature sensors - Mounted - with Antenna

T04 - rev C

Sensor reference Sensor chip reference(standard)

Measurement range Mounting Dimensions (LxWxH in mm) Fixation Antenna type Recommended environment

without antenna with antenna without antenna if not integrated- TSA D003 TSE AS10 -15°C, 165°C Antenna mounted 97.2x82x17.5 2 screws Integrated PIFA Metallic ground plane

TSM G100 to 105* TSA G100 to 105 TSE F160 to 165 -15°C, 165°C Stainless steel thermowell 124x27 - probe Ø 9 1/2" G male screw AN D071 Metallic ground plane

- TSA H100 to 105 TSE F160 to 165 -15°C, 165°C Stainless steel thermowell 174x27 - probe Ø 9 1/2” G male screw Integrated high-performance monopole Metallic ground plane

- TSA G130 to 135 TSE F160 to 165 -15°C, 165°C Stainless steel screw 60x26 - radome Ø 16 M18 screw Integrated monopole Metallic ground plane

TSM G160 to 165* TSA G160 to 165 TSE F160 to 165 -15°C, 165°C Aluminum fixture 26x16x12.6 2 clamps or 2 screws or glue AN D071 Metallic ground plane

- TSA H160 to 165** TSE F160 to 165 -15°C, 165°C Aluminum fixture H 58.4 - base Ø 35.5 2 screws or glue Integrated high-performance monopole Metallic ground plane

TSM G190 to 195* TSA G190 to 195 TSE F160 to 165 -15°C, 165°C Aluminum fixture 26x16x12.6 2 magnets AN D071 Metallic ground plane

- TSA H190 to 195** TSE F160 to 165 -15°C, 165°C Aluminum fixture H 58.4 - base Ø 35.5 2 screws or 2 magnets Integrated high-performance monopole Metallic ground plane

- TSA G110 to 115 TSE F160 to 165 -15°C, 165°C Resin-molded ceramic PCB 175x6x2.7 Embedded or glued Integrated helicoidally wired dipole Dielectric material - non-metallic environment

Antennas

SENSeOR’s RF experts can design customized optimized antennas for each application according to your specifications.

Reference Type Connector Dimensions (in mm)

AN G050 High-performance module with integrated radome SMA with cable H 58.4 - Ø 35.5 - Cable 450

AN G051 High-performance module with integrated radome (µWFL with strain gage) H 58.4 - Ø 35.5

AN G055 High-performance module with integrated radome - Magnet mounted SMA with cable H 58.4 - Ø 35.5 - Cable 450

AN G056 High-performance module with integrated radome - Magnet mounted (µWFL with strain gage) H 58.4 - Ø 35.5

AN G060 Monopole - Magnet-mounted Straight SMA 150 - Cable 3 m

AN D070 Monopole Straight SMA 170

AN D071 Monopole Straight SMA 40

AN D080 Monopole Crooked SMA 170

AN D081 Monopole Crooked SMA 40

AN D082 Monopole Crooked SMA 90

If our standard sensors do not cover your need, SENSeOR’s engineers will help you build a customized optimized system. For custom development of pressure sensors, contact us.

System reference Sensor reference Transceiver reference Measurement range Accuracy Refresh rate Interrogation distance *** ISM Rotation Options

T01 - rev B 1 TSA G161 WR C001 -15°C, 165°C +/-2°C 40 Hz - 25 ms 5 cm - 200 cm Yes Yes T01S - rev B with 1 TSA G131 / T01T - rev B with 1 TSA G101

T01A - rev B with analog output 1 TSA G161 WR C001 -15°C, 165°C +/-3°C 5 Hz - 200 ms 5 cm - 200 cm Yes Yes T01AS - rev B with 1 TSA G131 / T01AT - rev B with 1 TSA G101

T01 - rev C 1 TSA H161 WR C001 -15°C, 165°C +/-2°C 40 Hz - 25 ms 5 cm - 400/500 cm Yes Yes -

T02 - rev B 1 TSA G161 WR E010 -15°C, 165°C +/-2°C 1 Hz - 1 s 3 cm - 90 cm Yes No -

T04 - rev B 4 TSA G161 WR D001 -15°C, 165°C +/-2°C 3 Hz - 333 ms 10 cm - 200 cm Yes Yes T04S - rev B with 4 TSA G131 / T04T - rev B with 4 TSA G101

T04 - rev C 4 TSA H161 WR D001 -15°C, 165°C +/-2°C 3 Hz - 333 ms 100 cm - 250 cm Yes Yes -

T06 - rev B 6 sensors (TSA G160 to TSA G165) WR D005 -15°C, 165°C +/-2°C 5 Hz - 200 ms 5 cm - 90 cm No Yes -

T06 - rev C 6 sensors (TSA H160 to TSA H165) WR D005 -15°C, 165°C +/-2°C 5 Hz - 200 ms 15 cm - 300/400 cm No Yes -

System performance levels are typical & application dependant. All parameters can be enhanced with customized development.

ISM refers to European license-free ISM band [433.05 MHz 434.79 MHz]. Other sensors operate inside frequency band [430.50 MHz 449.50 MHz].

SENSeOR’s systems are delivered with necessary accessories for connection to computer, measurement read-out on Graphic User Interface & antenna connection.

All sensors & transceivers can be associated to build customized measurement systems. The unique, patented, differential structure of SENSeOR’s temperature sensors makes them the most robust products on the market.

TSA D003 TSM G100 TSA G130

AN G051

TSA G160

T04 - rev B T06 - rev B T06 - rev C

AN G050 AN D071

TSA H160

T01 - rev B

TSA G110

Wireless passive SAW strain gauges

Strain & TorqueBased on a range of available references (see below), SENSeOR’s experts develop customized wireless passive strain sensors covering various applications for instance in automation (torque on shaft, clamping force, tank level) or structural health monitoring (pipeline monitoring).Gauge references & positions, antennas, sensor mounting & packaging will be optimized depending on your application & specifications.

For temperature compensation, factory-calibrated temperature sensors can be used for measurements on steel. To identify the appropriate reference, refer to compatible frequency band occupation depending on the gauge(s) used. If the part to monitor is not made of steel, the strain gauges & the temperature sensors need to be calibrated on the part, on-site. Only gauges SSE E015 & SSE E017 operate inside ISM band. They can be associated for a half-bridge configuration, inside ISM band.

SENSeOR HeadquartersLe Navigator – Bâtiment B505 route des Lucioles06560 Valbonne – Sophia AntipolisFrancePhone : +33 (0)4 97 23 13 20 Fax : +33 (0)4 93 06 08 58www.senseor.com

Réalisation : FG Medias201311Productsv3

© Copyright SENSeOR 2013

See related product specifications on our website for more detailed

information & recent updates.

Standard products or customized development & field-engineering by our expert engineer team

RF TransceiversReference

Number of

sensors

RF output Antenna

connectionInterface

(standard)*Sampling rate

(standard configuration)

ConsumptionOperating

temperature range

Dimensions (LxWxH in mm) ISM

WR C001 1 1 Digital (RS232/USB) Analog in option 150 Hz 160 mA/12 V -20°C, 70°C 184x109x30 Yes

WR D005 up to 6 1 Digital (RS232/USB) 150 Hz 160 mA/12 V -20°C, 70°C 184x109x30 No

WR D001 up to 4 4 Digital (RS232/USB) 150 Hz (divided by number of sensors) 160 mA/12 V -20°C, 70°C 184x109x30 Yes

WR D004 up to 24 4 Digital (RS232/USB) 150 Hz (divided by number of sensors) 160 mA/12 V -20°C, 70°C 184x109x30 No

WR E010 1 1 Digital (USB) 20 Hz 85 mA/5 V (by USB port) -10°C, 70°C 102x72x22 Yes

Measurement configuration Traction Compression Flexion Torque

Half-bridge (choose 2 gauges) SSE E015, SSE E016, SSE E017, SSE E018

SSE E015, SSE E016, SSE E017, SSE E018

SSE E015, SSE E016, SSE E017, SSE E018

Full-bridge (4 gauges) SSE E015, SSE E016, SSE E017, SSE E018

SSE E015, SSE E016, SSE E017, SSE E018

SSE E015, SSE E016, SSE E017, SSE E018

*Other output types & communication protocols are available in customized projects.

ISM configuration in blue

Sensor referenceMeasurement

rangeOperating

temperature range

Dimensions (LxWxH in mm)

Frequency band over

measurement range (MHz)

ISMgauge

with µWFL connector

for antennawith

antenna

SSE E015 SSM E015 SSA E015 +/-500 µm/m -20°C, 85°C 9x5.4x0.8 433,65 - 434,25 Yes

SSE E016 SSM E016 SSA E016 +/-500 µm/m -20°C, 85°C 9x5.4x0.8 432,00 - 432,95 No

SSE E017 SSM E017 SSA E017 +/-500 µm/m -20°C, 85°C 9x5.4x0.8 432,95 - 433,65 Yes

SSE E018 SSM E018 SSA E018 +/-500 µm/m -20°C, 85°C 9x5.4x0.8 434,25 - 435,00 No

WR C001WR D005

WR D001WR D004 WR E010