Nemo Invex II - KeysightNemo Invex II Future-Proof Benchmarking Nemo Invex II from Keysight...

Find us at www.keysight.com

D ATA S H E E T

Nemo Invex II

Future-Proof BenchmarkingNemo Invex II from Keysight Technologies, Inc. is the most powerful and advanced

benchmarking system for testing with large wireless device configurations.

Protect your investment with a future-proof benchmarking platform supporting

measurements across all major wireless network technologies, including 5G NR.

In the Nemo Invex II design, the main focus has been on reliability in extreme

conditions. The state-of-the-art thermal design enables longer and more secure

measurements without interruptions. The enhanced capacity offers support for the

largest number of test devices in the world with less hardware.

Features:• Support for the largest

number of test devices in the world: simultaneous testing of up to 50 test devices and four scanning receivers

• Support for all technologies up to 5G NR and beyond, enabling the testing of multiple technologies with one drive test

• Support for Nemo Intelligent Device Interface, a device control solution for 5G NR and LTE-A QoS and QoE measurements

• Better performance and higher test device density per system

• Designed for testing and benchmarking high data rates

• Support for current and future MIMO devices

• Lower power consumption per test device


Enhanced reliability and accurate measurements• State of the art thermal design enables longer and

more secure measurements without interruptions

• Replaceable air filters protect the unit from dust and overheating

• Improved UPS, including backup for scanners

• Advanced built-in lockable USB connectors

• USB 3.0 SuperSpeed battery charging v. 1.2 compliant ports enable charging of measurement devices

• Built-in monitoring for power, temperature, and current maintaining the measurement system at optimal temperature

Easy to use, versatile• Benchmark for how measurement products are

designed to be installed and used

• Less cabling – built-in RF splitters, all modules powered by a single chassis

• Wireless connectivity of management PC

• Ambient lights and rear panel lights make setup and use easy and convenient

• Built-in keyboard, video, and mouse (KVM) for improved use and setup

• Web-based maintenance tool for updating and configuring the Nemo Invex II system

Measurement options• CS and PS data measurements

• Voice, voice quality PESQ and POLQA (ITU-T P.862.1, WB-AMR, P862.2, ITU-T P.863)

• VoLTE voice call support (Qualcomm IMS, Samsung IMS client)

• Video call, video call quality, video streaming, YouTube and Netflix video streaming, and video streaming analysis measurements (PEVQ-S)

• Indoor measurements

• Frequency scanning, pilot scanning, CW scanning and spectrum analyzer measurements

• SMS, MMS, and USSD measurements

• FTP testing for file transfers (multithreaded)

• SFTP testing for file transfers (download and

upload)

• HTTP/S testing for file transfers (download and upload)

• HTTP/S testing for web browsing

• SMTP/POP3/IMAP for email testing

• Iperf for UDP/TCP testing

• Voice quality testing

• PTT call testing (QChat and Kodiak InstaPoC)

• Facebook, Twitter, Instagram (selected functionality), WhatsApp, Line, Snapchat, and Dropbox testing

• IP packet capturing and playback

• Missing neighbor detection for GSM, WCDMA, and CDMA

• CDMA, EVDO, and WCDMA pilot pollution analysis

• GSM interference analysis

• LTE ANR CGI reports

• Diagnostics data logging (Qualcomm)

• Emergency call testing

• Remote controlled measurements with Nemo Cloud

Supported Technologies• 5G NR

• LTE/LTE-A (FDD/TDD)

• Carrier aggregation testing

• Three-component carrier aggregation (4CCA)

• HSPA+ DC, HSPA+, HSPA, HSUPA, HSDPA

• WCDMA, GSM

• EDGE, GPRS, HSCSD

• CDMA2000 1xRTT, CDMA2000 1xEVDO (Rel. 0, A, B)


Device GSM WCDMA LTE CDMA SHIM1 HIM2 VQ3NATA/OD version4

Apple iPhone 6S (A1688)

Quad- band

850, 900, 1700, 2100, 1900,

HSDPA Cat 24

HSUPA Cat 6 (42.2/5.76)

LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25-29

LTE TDD bands 38-41

LTE Cat 6 (300/50)

Bands depend on the model

CDMA EVDO Rev. A (800, 1700/ 2100, 1900, 2100 MHz)

7.8.0.8

NATA for iOS

1.00.09

Max.one data phone/ UIC-i7

iTunes must be installed to UIC

HTC 10 M (Orange & Taiwan variants)

Quad- band

850, 900, 1900, 2100

LTE FDD bands 1, 3, 5, 7, 8, 12, 20, 28, 32

LTE TDD bands 38, 40, 41

LTE UE Cat 4, 6, 9

x 7.90

HTC U11 (2PZC30000)

Quad- band

WCDMA bands 1, 2, 5, 8

LTE FDD bands 1, 4, 5, 7, 8, 12, 17, 20, 28, 32

LTE TDD bands 38-41

LTE UE Cat 16

NATA 8.02.245/ 8.0.2.22

Supported Handsets with Nemo Invex II The handsets shown in the table below are supported with the Nemo Invex II application.

Version number presents the versions at the time of initial release.

• 1

1 SHIM = Single handset isolation module2 HIM = Handset isolation module3 VQ = Voice quality4 NATA/OD = Nemo Active Testing Application/Nemo Outdoor



Motorola Moto X Pure Edition

XT1575

Quad- band

850, 900, 1900, 2100, AWS

HSDPA UE Cat 24 HSUPA UE Cat 6

Capabilities vary depending on SIM card used!

LTE FDD bands 1-5, 7, 8, 12, 13, 17, 25, 26,

LTE TDD band 41

Verizon SIM:

LTE FDD bands 2-5, 7, 13

LTE UE Cat 4

CDMA

800, ESMR800, 1900

EVDO Rev.A

x NATA 2.51.164/ 7.8.1.14

Netgear Aircard 810S Mobile Hotspot

850, 900, 1900, 2100

LTE FDD bands 1, 3, 7, 8, 28

Cat 4, 6, 9, 11

7.7.1.14

Netgear NightHawk MR1100

Quad-band

850, 900, 1900, 2100

LTE FDD bands 1, 3, 7, 8, 28

LTE UE Cat 16

7.91

Samsung Galaxy Note 4 (SM-N910F) (EU)

Quad-band

850, 900, 1900, 2100

LTE FDD bands 1-5, 7, 8, 17, 20

Cat 6

x 2.11.06.4/ 7.4.2.1.5

Samsung Galaxy Note 4 (SM-N910G)

(Asia)

Quad-band

850, 900, 1900, 2100

LTE FDD bands 1-5, 7, 8, 28

LTE TDD bands 38, 40

Cat 6

x 2.11.06.4/ 7.4.2.1.5

Samsung Galaxy Note 4 (SM-N910T)

LTE FDD bands 1-5, 7, 8, 12, 17

Cat 4

x x 2.30.09.9/ 7.6.0.7

Samsung Galaxy Note 5 (SM-N920i)

Quad- band

850, 900, 1900, 2100

HSDPA UE Cat 24, HSUPA UE Cat 6

LTE FDD bands 1-5, 7, 8, 12, 17-19, 26, 28

LTE TDD band 40

LTE UE Cat 4, 6, 9

x NATA 2.51.16

4/

7.8.1.14



Samsung Galaxy S5 (SM-G900A)(AT&T)

Quad- band

850, 1900, 2100

LTE FDD bands 1-5, 7, 17

CA, Cat 4

x HIM

only

7.4.2.1.5

NATA not support ed. VQ via analog audio

Samsung Galaxy S5 (SM-G900F) (EU)

Quad- band

850, 900, 1900, 2100

LTE FDD bands 1-3, 5, 7, 8, 20

x x 2.11.06.4/ 7.4.2.15

Samsung Galaxy S5 (SM-G900I) (ASIA)

Quad- band

850, 900, 1900, 2100

LTE FDD bands 1-3, 5, 7, 8, 28

LTE TDD band 40

x x 2.11.06.4/ 7.4.2.15

Samsung Galaxy S5 (SM-G900M)

Quad- band

850, 900, 1900, 2100, 2100AWS

LTE FDD bands 1, 2, 4, 5, 7, 17

Cat 4

x 2.30.09.9/ 7.6.0.7

Samsung Galaxy S5 (SM-G900P)(Sprint US)

LTE FDD bands 25, 26

LTE TDD band 41

800, 1900

EVDO Rel 0

EVDO Rev A

x x 2.11.06.4/ 7.4.2.15

Samsung Galaxy S5 (SM-G900R4) (US Cellular)

LTE FDD bands 2, 4, 5, 12, 17, 25

LTE UE Cat 4

x x 2.11.06.4/ 7.4.2.1.5

Samsung Galaxy S5 (SM-G900T)(T-Mobile US)

Quad- band

850, 1900, 2100, 2100AWS


x x 2.11.06.4/ 7.4.2.1.5

Samsung Galaxy S5 (SM-G900T1) (Metro PCS)

Quad- band

850, 1900, 2100, 2100AWS


Cat 4

800, 1900

EVDO Rev A

x x 2.11.06.4/ 7.4.2.1.5

Samsung Galaxy S5 (SM-G900V) (Verizon)

Quad- band

LTE FDD bands 4, 13

800, 1900

EVDO Rev A

x HIM

only

7.4.2.1.5

NATA not supported.

VQ via analog audio



Samsung Galaxy S5 (SM-G900W8) (Bell)

Quad- band

850, 1900, 2100, 2100AWS

LTE FDD bands 5, 17

x x 2.11.06.4/ 7.4.2.1.5

Samsung Galaxy S6 (SM-G920F)

Quad- band

850, 900, 1900, 2100, AWS


LTE FDD bands 1-5, 7, 8, 12, 17-19, 26, 28

LTE TDD band 40

LTE UE Cat 4, 6

x x 2.31.11.5/ 7.6.1.1.2

Samsung Galaxy S6 (SM-G920I)(SEAP)

Quad- band

850, 900, 1900, 2100, AWS


LTE FDD bands 1-5, 7, 8, 12, 17-19, 26, 28

LTE TDD band 40

LTE UE Cat 4, 6

x x 2.41.13.7/

7.7.1.1.4

Max. six handsets connected to UIC-i7

Samsung Galaxy S6 (SM-G920P)

Quad- band

850, 900, 1900, 2100


LTE FDD bands 2, 4, 5, 12, 25, 26

LTE TDD band 41

LTE UE Cat 4

CDMA2000- HRPD 800/ ESMR800/ 1900

(Band class 0, 10, 1)

CDMA2000-1xRTT 800/ ESMR800/ 1900

(Band class 0, 10, 1)

EV-DO Rev A 3.1 Mbps

x x 2.31.11.5/ 7.6.1.1.2

Samsung Galaxy S6 (SM-G920T)

Quad- band

850, 1900, 2100, AWS

LTE FDD bands 1-5, 7, 12, 17, 20

LTE UE Cat 4, 6

x 2.31.11.5/ 7.6.1.1.2



Samsung Galaxy S6 (SM-G920W8)

Quad-band

850, 1900, 2100, AWS

LTE FDD bands 1-5, 7, 12, 13, 17, 20, 29

LTE UE Cat 4, 6

x 2.31.11.5/ 7.6.1.1.2

Samsung Galaxy S6 (SM-G9208) (Taiwan)

Quad-band

850, 900, 1900, 2100


LTE FDD bands 1, 3, 4, 7, 8, 28

LTE TDD bands 38-41

LTE UE Cat 4, 6

x x x 2.31.11.5/ 7.6.1.1.2

Samsung Galaxy S6 Edge+

Quad-band

850, 900, 1900, 2100

LTE FDD bands 1-5, 7, 8, 12, 17-20, 26

LTE UE Cat 4, 6, 9

x NATA 2.41.13.7/ 7.7.1.14

Max. six handsets connected to UIC-i7

Samsung Galaxy 6 Edge+ (SM-G928K)

Quad-band

850, 1900, 2100

LTE FDD bands 1, 2, 3, 5, 7, 8, 17, 20, 26


7.8.0.8

Samsung Galaxy S7 SM-G930R7 (CSpire)

Quad-band

850, 1900 LTE FDD bands 2, 4, 5, 12, 13, 17, 25

LTE UE Cat 9

CDMA 800, 1900

NATA 8.01.244/ 8.0.1.20

Samsung Galaxy S7 SM-G930V (Verizon)

Quad-band

850, 900, 1900, 2100

LTE FDD bands 2, 3, 4, 7, 13

LTE UE Cat 9

CDMA 800, 1900

NATA 8.01.244/ 8.0.1.20

Samsung Galaxy S7 SM-G930P

Quad-band

850, 900, 1900, 2100

LTE FDD bands 2, 3, 4, 5, 12, 13, 25, 26

LTE TDD band 41

LTE UE Cat 9

CDMA 800, 1900

x NATA 8.01.244/ 8.0.1.20



Samsung Galaxy S7 Edge (SM-G935F)

Quad- band

850, 900, 1900, 2100AWS, 2100

LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28

LTE TDD bands 38-41

LTE UE Cat 4, 6, 9

x 7.8.0.8

Samsung Galaxy S7 Edge (SM-G935FD)

Quad- band

850, 900, 1700, 1900, 2100

LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28

LTE TDD bands 38-41

LTE UE Cat 9

7.8.0.8


Quad- band

850, 900, 1900, 2100AWS, 2100 HSDPA UE Cat 24, HSUPA UE Cat 6

Capabilities vary depending on operator and region.

LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28, 32, 66

LTE TDD bands 38-41

LTE UE Cat 4, 6, 9

x

(8.1.0)

NATA 8.0.0.15/ 8.00.233

Samsung Galaxy S8 SM-G950U (Sprint)

Quad- band

850, 900, 1700, 1900, 2100


LTE FDD bands 1-5, 7, 8, 12, 20, 28-30

LTE TDD bands 38-41

LTE UE Cat 16

NATA 8.10.273/ 8.1.0.12



Samsung Galaxy S8 SM-G950U (TMOB)

Quad- band

850, 900, 1700, 1900, 2100


LTE FDD bands 1-5, 7, 8, 12, 20, 28-30

LTE TDD bands 38-41

LTE UE Cat 16

NATA 8.10.273/ 8.1.0.12

Samsung Galaxy S8 SM-G950U (Verizon)

Quad- band

850, 900, 1700, 1900, 2100


LTE FDD bands 1-5, 7, 8, 12, 20, 28-30

LTE TDD bands 38-41

LTE UE Cat 16

NATA 8.10.273/ 8.1.0.12

Samsung Galaxy S8 SM-G950W (Canada variant)

Quad- band

850, 900, 1700, 1900, 2100


LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 29, 30

LTE TDD bands 38-41

LTE UE Cat 16

NATA 8.10.273/ 8.1.0.12




Quad- band

850, 900, 1900, 2100AWS, 2100 HSDPA UE Cat 24, HSUPA UE Cat 6


LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28, 32, 66

LTE TDD bands 38-41

LTE UE Cat 4, 6, 9

TBC 8.0.1

Samsung Galaxy S8+ (SM-G955F)

Quad- band

850, 900, 1900, 2100AWS, 2100

HSDPA UE Cat 24,

HSUPA UE Cat 6


LTE FDD 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28, 32, 66

LTE TDD bands 38-41

LTE UE Cat 4, 6, 9

x

(8.1.0)

NATA 8.0.0.15/ 8.00.233

Samsung Galaxy S9 SM-G960F

Quad-band

850, 900, 1900, 2100AWS, 2100

LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28, 32, 66

LTE TDD bands 38-41

LTE UE Cat 18

8.21.335 /8.2.1.14

Samsung Galaxy S9 SM-G960U (AT&T)

Quad-band

850, 1700, 1900, 2100

LTE FDD bands 1-5, 7, 8, 12, 14, 18-20, 28-30, 34, 66

LTE TDD bands 38-41

LTE UE Cat 18

NATA 8.21.335 /8.2.1.14



Samsung Galaxy S9 SM-G960U (TMOB)

Quad-band

LTE FDD bands 2, 4, 5, 7, 12, 13, 25, 26, 66, 71


LTE UE Cat 18

NATA 8.21.335 /8.2.1.14


Quad-band

LTE FDD bands 2, 4, 5, 12, 13, 17, 25, 26, 66

LTE TDD bands 41

LTE UE Cat 18

Band class 0, 1, 10

NATA 8.21.335 /8.2.1.14


Quad-band

LTE FDD bands 2, 4, 5, 7, 13, 26, 66


LTE UE Cat 18

Band class 0, 1

NATA 8.21.335 /8.2.1.14

Samsung Galaxy S9 SM-G960U1 (Cspire)

Quad-band

LTE FDD bands 2, 4, 5, 7, 13, 26, 66


LTE UE Cat 18

NATA 8.21.335 /8.2.1.14

Samsung Galaxy S9 SM-G960W (Canada)

Quad-band

LTE FDD bands 2, 4, 5, 7, 13, 26, 66


LTE UE Cat 18

Band class 0, 1

NATA 8.21.335 /8.2.1.14

Samsung Galaxy S9 SM-G9600 (China and CALA)

Quad-band

850, 900, 1900, 2100, 2100 AWS

LTE FDD bands 2, 4, 5, 7, 13, 26, 66


LTE UE Cat 18

Band class 0, 1

NATA 8.21.335 /8.2.1.14



Samsung Galaxy S10 SM-G973F

Quad-band

WCDMA 850, 900, 1900, 2100, 2100AWS

LTE FDD bands 1-5, 7, 8, 12, 13, 17-20, 25, 26, 28, 32, 66

LTE TDD bands 38-41

Note: Capabilities are market and operator specific.

8.52.442 / 8.52

Samsung Galaxy S10 SM-G973U (AT&T)

Quad-band

WCDMA 850, 900, 1900 PCS, 2100, AWS-1

HSPA Cat 14/6

LTE FDD bands 2, 4, 5, 7, 12, 14, 29, 30, 66


8.52.442 / 8.52


LTE FDD bands 2, 4, 5, 12, 13, 25, 26, 41, 66

LTE TDD band 41

CDMA2000-HRPD band class 0, 1, 10

CDMA2000-1xRTT band class 0, 1, 10

8.52.442 / 8.52

Samsung Galaxy S10 SM-G973U (T-Mobile)

Quad-band

WCDMA 850, 1900 PCS, 2100, AWS-1

HSPA Cat 24/6

LTE FDD bands 2, 4, 5, 7, 12, 14, 29, 30, 66


8.52 / 8.52.442


Quad-band

WCDMA 850, 900, 1900 PCS, 2100

LTE FDD bands 2, 4, 5, 7, 12, 13, 26, 66


8.52.442 / 8.52

Samsung Galaxy S10 SM-G973W

Quad-band

WCDMA 800 Japan, 850 Japan, 850, 900, 1900, 1900 PCS, 2100, AWS-1

LTE FDD bands 1-5, 7, 8, 12, 13, 19, 20, 25, 26, 28, 29, 30, 32, 66

LTE TDD bands 38-41, 46

8.52.442 / 8.52



Samsung Galaxy S10 SM-G977N

8.52.442 / 8.52

Samsung Galaxy S10 SM-G977B

8.52.442 / 8.52

Sony Xperia X Performance F8131

Quad- band

800Japan, 850, 850Japan, 900, 1900, 2100AWS, 2100


LTE FDD bands 1-5, 7, 8, 12, 13, 17, 19, 20, 26, 28, 29

LTE TDD bands 38-41

LTE UE Cat 4, 6, 9

x x 7.90

Sony Xperia X Performance F8132

Quad- band

800Japan, 850, 850Japan, 900, 1900, 2100AWS, 2100

LTE FDD bands 1-5, 7, 8, 12, 13, 17, 19, 20, 26, 28, 29

LTE TDD bands 38-41

LTE UE Cat 4, 6, 9

x x

Sony Xperia Z3 (D6653)

Quad- band

850, 900, 1900, 2100


LTE FDD bands 1, 3, 5, 7, 8, 28

LTE TDD band 40

LTE UE Cat 4

x x 2.3.1.115/ 7.6.1.1.2

Sony XZ1 G8341

Quad- band

800, 850, 900, 1700, 1900, 2100

LTE FDD bands 1-5, 7, 8, 12, 13, 17, 19, 20, 26, 28, 29, 32

LTE TDD band 38-41

LTE UE Cat 16

NATA 8.20.314/ 8.2.0.10



Sony Xperia XZ Premium Dual G8142

Quad- band

WCDMA bands 1, 2, 4, 5, 6, 8, 19

LTE FDD bands 1-5, 7, 8, 12, 13, 17, 19, 20, 26, 28, 29, 32

LTE TDD band 38-41

LTE UE Cat 16

NATA 8.02.245/ 8.0.2.22

Sony Xperia XZ Premium G8141

Quad- band

WCDMA bands 1, 2, 4, 5, 6, 8, 19

LTE FDD bands 1-5, 7, 8, 12, 13, 17, 19, 20, 26, 28, 29, 32

LTE TDD band 38-41

LTE UE Cat 16

NATA 8.02.245/ 8.0.2.22

ZTE Turkcell T50

Quad- band

7.8.0.8

Scanners Supported in Nemo Invex II

Scanner GSM WCDMA CDMA TD-SCDMA LTEDedicated power cable

Other

Nemo FSR1 Quad-band

850, 900, 1800, 1900, 2100, 2100AWS

850, 1900, 2100AWS

LTE FDD bands 1-5, 7, 8, 10, 12-14, 17, 19, 20, 25, 26, 28

LTE TDD bands 33, 35, 36, 38-41

x Spectrum analyzer

Band scan

PCTEL MX series

Quad- band

850, 900, 1800, 1900, 2100, 2100AWS

850, 900 (SMR), 1900

LTE FDD bands 1-5, 7, 8, 12-14, 17-21, 24-26, 28

LTE TDD bands 38-41

x Spectrum analyzer


Scanner GSM WCDMA CDMA TD-SCDMA LTEDedicated power cable

Other

PCTEL SeeGull MXflex

Quad- band

850, 900, 1800, 1900, 2100, 2100AWS

800, 900 (SMR), 1900

2000 LTE FDD bands 1-5, 7, 8, 12-14, 17-21, 24, 25, 27, 28

LTE TDD bands 38-43

x Spectrum analyzer

PCTEL SeeGull EXflex/IBflex

Quad- band

850, 900, 1800, 1900, 2100, 2100AWS

450, 800, 900 SMR), 1900

2000 LTE FDD bands 1-5, 7, 8, 12-14, 17-21, 24, 25, 27, 28

LTE TDD bands 38-41

x Spectrum analyzer

Rohde & Schwarz TSMW

Quad- band

850, 900, 1800, 1900, 2100, 2100AWS

450, 800, 1900

LTE FDD bands 1-5, 7-14, 17-21, 24-28, 31


x Up to four scanners supported simultaneously

Rohde & Schwarz TSME

Quad- band

850, 900, 1800, 1900, 2100, 2100AWS

450, 800, 1900

LTE FDD bands 1-5, 7-14, 17-21, 24-26, 28, 31


x


Key Features• Supported platforms include 32/64-bit Windows

7, Windows 8 or Windows 10 on a PC (Lenovo or Dell recommended)

• Multiple simultaneous data transfers on a single terminal

• Benchmarking for better performance: measurements can be carried out on multiple networks and even on multiple technologies simultaneously for ultimate network performance

• QoS measurements: voice quality, video quality, video call quality, and video streaming quality measurements are supported

• Wide selection of measurement event statistics: call, handover/handoff, intersystem handover, intersystem cell reselections, location area, attach, PDP context, SMS/MMS, routing area, and user level data statistics

• Measurement file uploading: measurements files can be sent directly from the user interface to an FTP server, Nemo Cloud or Nemo Xynergy for storage

• Automatic device detection: multiple devices can conveniently be added to the system in user-defined order

• Automatic power shut down in case external power is lost

• Automatic test device software and hardware resets; ability to reset test devices in case of lock up

• Manual UIC hardware and OS restart

• Outdoor maps: MapInfo and OpenStreetMap formats supported.

• Indoor option: use Nemo Outdoor with the Indoor option on a Tablet PC, and to view the results on an indoor map along with base stations in Nemo Outdoor. Also iBwave floorplans are supported.

• BTS files can be edited in Nemo Invex II

• Instant playback functionality: see the measurement results immediately after a measurement in user-configurable data views and workspaces. IP packet capture files can also be viewed in playback.

• Extensive application testing features, including YouTube, Facebook, Instagram, Push-To-Talk (QChat, Kodiak), email, MMS, SMS, and voice call testing

• Application testing using touchpad simulation

• Search and display user-defined parameters from signaling messages in info view and graph side panel

• Forcing features

• Cell testing: test the surrounding cells of a location using an automated list of test calls that are locked to a cell at a time

• CDMA, EVDO, and WCDMA pilot pollution analysis: pilots causing possible pilot pollution are shown in real time. You can define the following thresholds: polluter level window from best active set cell (dB), Ec/N0 and Ec/I0 active set best below threshold (dB), RSCP active set best above threshold (dBm), and pilot count threshold

Legacy Nemo Invex I Supported DevicesNemo Invex I devices below can be used with Nemo

Invex II HIM units with special adapter kits.

• CDMA2000 1xEVDO Rev A

- Huawei C7600

• HSDPA

- ZTE MF193

• HSPA

- Nokia 6720, 6720US, C5-00.2, C5-03, C5-03US, C7-00

- Sony Ericsson Xperia arc S (LT-18i)

• HSPA+

- Huawei E372u-8

- Novatel Ovation MC545

- Onda MT689DC

- Sierra Wireless 308, 312U, 319U

- ZTE MF668A, MF683


• LTE

- Huawei E398, E392u-12

- Samsung Galaxy S II LTE (GT-I9210), Galaxy S III (SGH-i747, GT-I9305), Galaxy S4 (GT-i9505, SGH-i337 (AT&T), SGH-M919 (TMOB), Galaxy S4 Mini (GT-I9195), Galaxy S4 4G+ (GT-i9506)

- Sierra Wireless 320U, 330U

- ZTE MF820D

Configurations• Simultaneous testing of max 50 UEs

- 29 smartphones with isolation modules or

- 50 smartphones with SHIM modules or

- 50 modems (or combinations of both) and

- 4 scanners

Hardware Status Display & Alerts• System

- Base IP address

- GPS antenna voltage

- GPS input (internal/external)

- Input voltage

- Total current

- GPS mode

• GPS information

- Lock

- Mode

- Satellites

- Latitude/longitude

• For each chassis

- Voltage, current, battery information, and temperature

- Version information

- UIC location

• UIC information

- Voltage, current and temperature

- USB port usage

• HIM information

- Voltage, current, and temperature

- Handset status

• Alerts

- Low input voltage (warning)

- Critical input voltage (shutdown)

- High temperature (warning)

- Critical temperature (shutdown)

- GPS fix loss (warning)

Hardware alerts (written as ERR events in the measurement log)• Hardware voltage high

• Hardware voltage low

• Hardware battery operation

• Hardware battery voltage low

• Hardware high voltage shutdown

• Hardware battery shutdown

Physical Input power• Chassis input (turn on): +12 V minimum, +16 V

maximum

• Maximum power 500 W/chassis

• Chassis input (switch to bat): +9.5 to +10 V set by PIC

• Chassis input (auto disconnect): +9 V minimum, +10 V maximum

• Input current: Fused at 75 A, auto-reset

Size and weight (configuration-specific)• 414 W x 234 H x 456 D mm

• 11.6 kg (chassis, including SAM and SPM modules)

Temperature range• Temperature range: -20 to +50°C ambient (-4 to

122°F)

• Operating range: 0 to +50°C (+32 to +122°F) with no preheat, -20 to +50°C with preheat

Battery pack specs• Lithium Ion Super B Model 5200 battery


Conformance

Standard/reference Description

IEC 61326-1:2012 / EN 61326-1:2013

2004/104/EN Clause 3.2.9

Electrical equipment for measurement, control and laboratory use –

EMC requirements (incl. automotive)

ANSI C63.4:2009 Methods of Measurement of Radio-Noise Emissions from Low-Voltage

Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

CISPR 25: 2002+ Corrigendum 1:2004 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

ISO 11452-1:2005 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology

ISO11452-2: 2004 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber- lined shielded enclosure

IEC 61326-1:2012 Electrical Equipment for Measurement, Control, and Laboratory Use – EMC

EN 61326-1:2013 Requirements – Part 1: General Requirements.

CISPR 11:2009/A1:2010 Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment

EN 55011:2009/A1:2010 Electromagnetic Disturbance Characteristics – Limits and Methods of Measurement

ISO 11452-4: 2005+ Corrigendum 1:2009

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)

ISO 7637-2: 2004 + A1:2008 Road vehicles — Electrical disturbances from conduction and coupling

— Part 2: Electrical transient conduction along supply lines only

IEC 61000-3-2:2005/A2:2009

EN 61000-3-2:2006/A2:2009

Limits for Harmonic Current Emissions

(equipment input current ≤ 16 A per phase)


Standard/reference Description

IEC/EN 61000-3-3:2008 Limitation of Voltage Changes, Voltage Fluctuations and Flicker in

Public LowVoltage Supply Systems, for equipment with rated current

≤ 16 A per phase and not subject to conditional connection.

IEC 61000-4-2:2008

EN 61000-4-2:2009

Testing and Measurement Techniques - Electrostatic Discharge Immunity Test

IEC/EN 61000-4-3:2006/ A2:2010 Testing and Measurement Techniques -

Radiated, Radio-Frequency, Electromagnetic Field Immunity Test

IEC/EN 61000-4-4:2004/ A1:2010 Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test

IEC 61000-4-5:2005/Corr:2009

EN 61000-4-5:2006

Testing and Measurement Techniques - Surge Immunity Test

IEC 61000-4-6:2008

EN 61000-4-6:2009

Testing and Measurement Techniques - Immunity to Conducted

Disturbances, Induced by Radio-Frequency Fields

IEC 61000-4-8:2009 Testing and Measurement Techniques -

Power Frequency Magnetic Field Immunity Test

IEC/EN 61000-4-11:2004 Testing and Measurement Techniques - Voltage Dips, Short

Interruptions and Voltage Variations Immunity Tests

ISO 17025:2005 General requirements for the competence of testing and calibration laboratories

IEC 61010-1:2010 (Third Edition) Safety requirements for electrical equipment for measurement, control and laboratory use (incl IP20):

IEC/ EN 60068-2-14 Operational, -10°..50°C

Environmental Testing

IEC 60068-2-27 Shock

IEC 60068-2-64 Random Vibration

Shock&Vibration


Supported UIC models• Nemo Invex II UIC controller module i7

- Supports up to 200 Mbps data transfers

- Intel Core i7-3517UE processor, 2C, 4M cache, 1.7 GHz

- Hard drive SSD 55 GB

- Required max. power: 65 W (with six UEs)

- Max. number of devices: 6

Communications interface• Gigabit Ethernet

• Proprietary ChassisNet

• SS USB 3.0/High Power (battery charging specs. 1.2)

• HS USB 2.0

• HDMI 1.3

Connectors• Proprietary power connector

• RJ-45

• SMA for GPS

• Proprietary SS USB 3.0 for device interface(s) with Nemo Easy Lock

• HS USB 2.0 for keyboard/mouse

• HDMI 1.3 for video

Main hardware modules

Nemo Invex II master chassis

• 13 active slots for different modules. Provides power with UPS, Invex NET (LAN) and WiFi. KVM for video (HDMI 1.3), keyboard, and mouse (USB)

• Maximum number of chassis per system: 5

Nemo Invex II System Management Module (SMM)

• Interface between control PC and chassis

• 1 Gigabit Ethernet ports

• Interface in the front panel

• Can be mounted to any slot in the system

• Contains illuminated main power on/off switch

• Color OLED display with integrated heater

• OLED display shows the basic status of the chassis and all modules attached. Voltage, current, alarms, battery status, GPS information, ambient light control, and more

• Joystick or buttons to control the information shown on the display

• One SMM required per system

Nemo Invex II System Access Module (SAM)

• Contains a 5 port Ethernet switch, (four for external devices, one for backplane)

• Contains GPS RF splitter and GPS/DR assembly

• Cost effective, high-performance u-blox 8 position engine

• BPS L1C/A, SBAS L1C/A, QZSS L1C/A, GLONASS L1OF

• GNSS types: GPS, Glonass, BeiDou

• High sensitivity of –166 dBm for single GNSS reception

• 100% coverage, continuous positioning even in tunnels

• 1 Hz combined DR+GPS navigation rate

• Gyroscope/temperature sensor monitoring

• Automatic sensor calibration/temperature compensation

Nemo Invex II Universal Interface Controller (UIC)

• Provides dedicated resources and interface with handsets, USB modems, and scanners

• UIC can be plugged into any slot in the chassis

• Front panel KVM switch and reset button

• Six SuperSpeed USB 3.0 USB ports: capable of supporting voice, PESQ & POLQA, and data in any configuration

• High current USB ports (compliant with the USB battery charging 1.2 A standard, 1.5 A/USB port/USB port)

• Advanced built-in lockable USB connectors with Nemo Easy Lock

• Ability to shut down USB port power to hard reset locked up devices

• Heater function (preheat mode with low temperatures)

• Built-in handle/cable management


• Main status/USB status LEDs

• UIC-i7:

- Intel Core i7-3517UE processor, 2C, 4M cache, 1.7 GHz

- Hard drive SSD 55 GB

- Simultaneous PESQ/POLQA connections - 6 each

- HSPA+ DC UEs - 6 each

- LTE USB modems UE Cat 4 UEs (DL 150 Mbps/UL 51 Mbps per modem) - 3 each

- LTE Cat 6 handsets with NATA (former NMR) application (DL 300/Mbps/ UL 51Mbps per UE) - 6 each

- Power: +12 VDC

- Maximum power: 30 to 65 W

Nemo Invex II Handset Isolation Module (HIM and SHIM)

• HIM - 2 slot wide Handset Isolation Module

- Weight ~1150 g (including handset)

- SMA antenna connectors - 4 each

• SHIM - 1 slot wide Slim Handset Isolation Module

- Weight ~965 g (including handset)


- WiFi support

• RF closure for test handset with adequate cooling and heating. Audio card for voice quality testing.

• Supports smartphones with up to 6.4” screens

• Shielded enclosure for handsets (~40 dB) attenuation

• Supports all modes of testing (VQ & data)

• Supports continuous driving

• Power provided by chassis via rear panel

• Ability to hard reset devices in case of handset lock up

• Single multicolor LED indicator to show module status

• Illuminated activation button: when the button is pressed, the status of the HIM will be displayed on the OLED display of the SMM module showing detailed UE information, voltage, current, and temperature

• SS USB 3.0 lockable connector

• SMA antenna connectors - 4 each

• Provides preheating and adequate cooling

• External SIM card reader

• SIM cards supported: normal SIM, micro, and nano SIM cards with adapters

Standard Accessories• System Power Module (SPM) (standard accessory

with the master chassis, optional with additional chassis)

- Provides power for external devices, e.g. for scanners, WiFi router and external display

- Auxillary power connectors: lockable Neutrik connectors - 3 each

- Maximum output current 10 A per port

- Battery backed up module

- Includes a cable detection system: detects the type of external device connected

- LED indicators

• Nemo Invex II Vehicle Power Supply (VPS)

- Provides power 12 VDC for up to five Nemo Invex II chassis

- One high current input (75 A maximum) and five lower current outputs (50 A maximum)

- Lockable connectors

- Mounting hardware included

- DC IN: +10 to +16 V

- MAX IN: 150 A

- DC breaker: 150 A

• Nemo Invex II Mains Power Supply (MPS)

- 120/230 VAC power supply

- AC input: 100 to 240 VAC

- DC output: +15 VDC (645) @ 43 A

- Lockable connectors

• Nemo Invex II Fixed Vehicle Mounting Kit (VMK)

- For mounting chassis or any other accessory module

- Comes with standard toolkit, including screw drivers (torx/allen) and SMA variant wrench


• Nemo Invex II Top Mounting Base Kit (TMBK)

- For securely mounting three chassis

- Comes with top mounting rails and ratchet tie downs - 2 each

Optional Accessories and ModulesNemo Invex II RF Splitter Option• RF splitters 1:4 mounted on top of the chassis - 3

each. Only with new orders

• 4 way RF splitter. Includes:

- RG-316DS SMA extension cable, 61 cm (24”) - 4 each

- RF termination, SMA male, 50 Ohms - 3 each

• Frequency range: 0.5 to 4 GHz

• Insertion loss: < 1.5 dB

• Isolation: > 16 dB

• VSWR in: 1.4:1

• VSWR out: 1.4:1

• Amplitude balance: < 0.3 dB

• Phase balance: < 5 degrees

U-blox 6 (LEA-6R) internal GPS receiver with standard DR-input module• Includes the following parts: DR cable kit and OBD

module Centrodyne Z059 (NI00009-16)

• OBD adapter provides easy and convenient access to vehicle speed pulse signal

Nemo Invex II Movable Vehicle Mounting (MVMK)• Holds two chassis systems (maximum)

• Ideal for vehicle installation with limited space

• Sliding and rotating the system

Nemo Invex II Standard 19-Inch Rack Mounting Kit (SRMK)

Nemo Invex II UE Retainer Kit (URK)• Kit for mounting test UEs securely with universal

holders when handset or USB modules are not used. Holds up to 6 UEs (6.4”)

• Includes headrest mounting

• Dimensions: 414 x 456 x 46 mm

• Available also with optional RF splitters

Nemo Invex II Portable UE Retainer Kit (PURK)• Portable kit for mounting test UEs securely with

universal holders when handset or USB modules are not used. Holds up to 6 UEs (6.4”)

• Includes headrest mounting

• Dimensions: 365 x 375 x 7 mm

• Available also with optional RF splitters

Nemo Invex II RF Splitter Kit (RSK)• RF splitters 1: 4 RF splitters for text UEs - 6 each

• Can be stacked on top, below, and between the chassis

• Available models:

- Nemo Invex II RF Splitter Kit (0.5 to 6 GHz)

- Recommended for WiFi measurements 5 GHz

- RF splitter, 4-way, which includes:

- RG-316DS SMA extension cable, 61 cm (24”) - 4 each

- RF termination, SMA male, 50 Ohms - 3 each

- Frequency range: 0.5 to 6 GHz

- Insertion loss: < 0.6 dB

- Isolation: > 20 dB

- VSWR in: 1.3:1

- VSWR out: 1.3:1

- Amplitude balance: < 0.4 dB

- Phase balance: < 4 degrees

- Power average @ 1.2:1 VSWR: < 10 dBm

- Nemo Invex II RF Splitter Kit (0.5 to 4 GHz)

- Frequency range: 0.5 to 4 GHz

- Insertion loss: < 1.5 dB

- Isolation: > 16 dB

- VSWR in: 1.4:1

- VSWR out: 1.4:1

- Amplitude balance: < 0.3 dB

- Phase balance: < 5 degrees

This information is subject to change without notice. © Keysight Technologies, 2018,-2019 Published in USA, August 20, 2019, 5992-2026EN


Learn more at: www.keysight.com

For more information on Keysight Technologies’ products, applications or services,

please contact your local Keysight office. The complete list is available at:

www.keysight.com/find/contactus

Nemo Invex II Scanner Mounting Kit( SMK)• Mounting kit for scanners

Nemo Invex II Wireless Access Kit (WAK)• WiFi/4-port router and mounting HW. Provides

wireless access to system.

Nemo Invex II Multi Cellular Router Kit• Wireless access from control PC to Nemo Invex II

system

• Online connectivity to Nemo Cloud and Nemo

• Server for end-to-end call control

• Comes preconfigured

• WAN interface: USB Interface - 1 each, GE - 2 each, embedded LTE modems with redundant SIM slots - 4 each

• LAN Interface: GE - 8 each

• Router throughput: 802.11 a/b/g/n 2 x 2 MIMO, WiFi, WAN, and/or AP

• Router throughput: 300 Mbps

• Cellular and GPS antenna connectors:


- SMA GPS antenna connectors - 4 each

- RP-SMA Wi-Fi antenna connectors - 4 each

• Power input, DC jack/terminal block: 12 to 48 V, 4 A

• Power output: Up to eight 802.3af PoE outputs

• Power consumption: 38 W maximum

• Dimensions: 50 x 292 x 177mm

• Weight: 1.9 kg

• Operating temperature: -40 to +40°C

• Humidity: 15 to 95% (non-condensing)

• Certifications: FCC, CE, RoHS, E-Mark, Shock and Vibration Resistance: EN 61373:1999 IEC

61373:1999, Railway Applications: EN 50155, Electromagnetic Compatibility: EN 61000

• Warranty: 1-year limited warranty

http://www.keysight.com/find/dmm

Nemo Invex II - KeysightNemo Invex II Future-Proof Benchmarking Nemo Invex II from Keysight...

Documents

Transcript of Nemo Invex II - KeysightNemo Invex II Future-Proof Benchmarking Nemo Invex II from Keysight...