NCDA _NSO-156_133-Q
-
Upload
mahabhashyam -
Category
Documents
-
view
149 -
download
16
description
Transcript of NCDA _NSO-156_133-Q
1. Administrator can natively run Data ONTAP-7Mode commands in what shell?A. AdminshellB. ClustershellC. NodeshellD. Systemshell: nodeshell
2. An administrator for a virtual server named abc17 mounts a new volume named vola at junction named /accounting/teama and creates two directories at the root of the new volume named 2011 and 2011/june. Healso copies afile called report.doc into the directory named june. An NFS clientmounts to the root of the namespace. What is the fully qualified path to the report.doc?A. /abc17/accounting/teama/2011/june/report.docB. /accounting/teama/2011/june/report.docC. /accounting/vola/teama/2011/june/report.docD. /vol/vola/2011/june/report.docE. Z:\vola\2011\june\report.doc: /accounting/teama/2011/june/report.doc
3. The aggregate relocation feature allows an administrator to move a __________.A. Data aggregate to any nodeB. Root aggregate to any nodeC. Data aggregate to the HA partnerD. Root aggregate to the HA partner: Data aggregate to the HA partner
4. Before establishing a CIFS share, which four steps must be taken?A. Mount a volume within a namespaceB. Configure name mappingC. Configure a share policy with the desired valuesD. Create a volumeE. Configure an export policyF. Enable Active Directory routingG. Set a default share policy: Mount a volume within a namespace, Configure name mapping, Create a volume, Configure an exportpolicy
5. A block from a Flash Pool read operation is initially marked as __________.A. hotB. warmC. neutralD. coldE. evict: neutral
6. By default how many management ports are there per node?A. OneB. TwoC. ThreeD. Four: one
7. The Catalyst 2960 can be used only on the management network for clusters that have _____nodes.A. 12B. 16C. 18D. 20E. 24: 24
8. The Cisco Nexus 5010/5020 interconnect switches require ______ISL connections where theCN1610 requires ___________ISL connections.A. 4 ISL connections; 8 ISL connectionsB. 8 ISL connections; 8 ISL connectionsC. 8 ISL connections; 4 ISL connectionsD. 4 ISL connections; 4 ISL connections: 8 ISL connections; 4 ISL connections
NCDA (NSO-156)Study online at quizlet.com/_12zrbc
9. A cluster node is a (n) _________.A. Admin nodeB. Cluster ververC. HA storage controller pairD. Storage controller: storage controller
10. A clustered Data ONTAP 8.2 Infinite Volume can share an aggregate with an FlexVol volume.A. TrueB. False: True
11. Clustered Data ONTAP 8.2 or later Quality of Service (QoS) Policies have which three characteristics? (Choose 3)A. A LUN's QoS policies can be changed dynamicallyB. A QoS policy can be decreasedC. A QoS policy can be increasedD. A Qtree's QoS policies can be changed dynamicallyE. A volume can be a member of two QoS policies: A LUN's QoS policies can be changed dynamically, A QoS policy can bedecreased, A QoS policy can be increased
12. Clustered data ontap 8.2 supports which four features?A. MetroClusterB. Data protection mirrorsC. Load-sharing mirrorsD. NDMP tape backupE. Non-disruptive upgradesF. SnapLock: data protection mirrors, load-sharing mirrors, NDMP tape backup, Non-disruptive upgrades
13. Clustered Data ONTAP supports ALUA with which protocols?A. FC onlyB. FC and FCoE onlyC. FC, FCoE and iSCSI onlyD. FC, FCoE, iSCSI and NFS only: FC, FCoE and iSCSI only
14. Clustered ONTAP 8.2 supports which quota types? (Choose 3)A. UserB. VolumeC. GroupD. TreeE. None; clustered ONTAP doesn't support quotas.: user, volume, tree
15. Clustered ONTAP supports multi-tenancy using which feature?A. Allow a unique login account (admin) for cluster administration purposes.B. Allow a unique login account (vsadmin) for cluster administration purposes.C. Allow a unique login account (admin) to each Vserver for administration purposes.D. Allow a unique login account (vsadmin) to each Vserver for administration purposes.: Allow a unique login account(vsadmin) to each Vserver for administration purposes
16. A data Vserver can contain which three elements?A. AggregatesB. Data LIFC. NAS volumesD. Other VserversE. PortsF. SAN LUNsG. A Vfiler: Data LIF, Ports, SAN LUNs
17. Export policies and rules are stored in the ...A. Vserver root volume for each data vserverB. /etc/exportsC. M-hostD. management RDBE. volume location RDB: management RDB
18. An export policy can determine access to volumes for which of the following protocols?A. iSCSI and FC volumesB. CIFS and NFS volumesC. iSCSI, CIFS, NFSD. NFS volumes onlyE. CIFS volumes only: CIFS and NFS volumes
19. A FAS6280 running ONTAP 8.0.2 HAS A 32-bit root aggregate. After upgrading to Data ONTAP 8.1, what is the status ofthe root aggregate?A. The root aggregate remains 32-bitB. The root aggregate converts from 32 to 64-bit in placeC. The root aggregate auto-migrates to a new 64-bit aggregateD. The upgrade fails with a message to create a new 64-bit aggregate before upgrade: the root aggregate remains 32-bit
20. The fcadmin config command...A. Is a Clustershell commandB. Is a Nodeshell commandC. Is a Systemshell commandD. Must be run in the advanced mode: Is a nodeshell command
21. FlexCache volumes in clustered ONTAP 8.2 __________.A. Are fully provisionedB. Can have Snapshot copiesC. Can be movedD. Are sparsely-populated volumes: are sparsely-populated volumes
22. For NDMP to be aware of a vserver, what actions needs to be taken? (Choose 3)A. Data management applicationB. Cluster-aware backupC. NDMP scope listedD. NDMP service enabled: Data management application, Cluster-aware backup, NDMP service enabled
23. For RAID-DP aggregates created with clustered Data ONTAP 8.2 or later, what is the default minimum number of disks?A. 1B. 2C. 3D. 4E. 5F. 6G. 10: 3
24. For Vserver-aware NDMP backups, the ______________ must be enabled with cluster-aware backup extensions.A. vServer management LIFB. DMA serverC. Data LIFD. Node management LIF: Data LIF
25. Fpolicy supports which of the following protocols? (Choose 6)A. SMB 1.0B. iSCSIC. SMB 2.0D. SMB 2.1E. FCF. SMB 3.0G. NFS v3H. NFS v4.0: SMB 1.0, SMB 2.0, SMB 2.1, SMB 3.0, NFS v3, NFS v4.0
26. From the output of the command "network interface show", the logical interface that has a value of "false" under the "IsHome" column signifies it (choose 2)A. Is disconnectedB. Has failed overC. Is administratively disabledD. Has been migratedE. Is currently being migrated to home node: Has failed over, has been migrated
27. Functionalities supported for Asynchronous FPolicy management. (Choose 2)A. File-access blockingB. File archiving and hierarchical storage managementC. File-access and auditingD. Encryption and decryption servicesE. Compression and decompression servicesF. Storage resource management: File-access and auditing, Storage resource management
28. How can you prevent a single SnapMirror relationship from utilizing more than the desired bandwidth?A. Specify a SnapMirror throttle for the destination modeB. Specify a SnapMirror throttle for the whole clusterC. Specify a SnapMirror throttle for that relationshipD. Enable SnapMirror network compression: Specify a SnapMirror throttle for that relationship
29. How do you create NFS export within clustered ONTAP?A. Define an export policy and rules under the node VserverB. Define an export policy and rules under the admin VserverC. Define an export policy and rules under a data VserverD. Define an export policy under a data Vserver and rules under the admin Vserver: define an export policy and rules under adata vserver
30. How do you organize volumes for data clients with an appropriate export policy?A. Mount the required volumes in a namespaceB. Mount the required namespaces in a volumeC. Mount the required namespaces in an aggregateD. Mount directories of a volume in a namespace: mount the required volumes in a namespace
31. How does the NetApp Remote Support Agent (RSA) connect to NetApp support?A. NetApp Support initiates a secure connection to the RSA.B. NetApp Support initiates a non-secure connection to the RSA.C. The RSA initiates a secure connection to NetApp Support.D. The RSA initiates a non-secure connection to NetApp Support.: The RSA initiates a secure connection to NetApp Support
32. How many cluster nodes are supported by the CN1610 Interconnect Switch in 8.2?A. 4B. 8C. 12D. 16E. 24: 12
33. How many cluster nodes are supported by the CN1610 Interconnect Switch in clustered ONTAP 8.2?A. 4B. 8C. 12D. 16E. 24: 12
34. How many cluster ports does each node have by default?A. OneB. TwoC. ThreeD. Four: Two
35. How many cluster ports per node are supported in clustered ONTAP 8.2?A. OneB. TwoC. ThreeD. Four: Two
36. How many cluster switch (es) are required for a NetApp cluster?A. 1B. 2C. 4D. 6: 2
37. How many concurrent SSH administrative sessions for a node are supported?A. 25B. 64C. 128D. 125: 64
38. How many ISL ports are required between the cluster interconnect switches when using Cisco switches?A. 2B. 4C. 6D. 8E. None; No ISLs are required: 4
39. How many ISL ports are required between the cluster interconnect switches when using CN1610 switches?A. 2B. 4C. 6D. 8E. None; No ISLs are required: 4
40. How many node does a CN1610 support?A. 8B. 10C. 12D. 14E. 16: 12
41. Identify two asynchronous Fpolicy applications.A. Quota managementB. File-access and audit loggingC. Storage resource managementD. Compression and decompression services: file-access and audit logging, storage resource management
42. Identify two synchronous Fpolicy applicationsA. quota managementB. file-access and audit loggingC. storage resource managementD. compression and decompression services: quota management, storage resource management
43. Identify two synchronous Fpolicy applications:A. Data motion serviceB. Encryption and decryption servicesC. Logical interface migration managementD. File archiving and hierarchical storage management: encryption and decryption services, file archiving and hierarchical storagemanagement
44. If a cluster is in quorum, what is the minimum number of participating nodes that must be healthy?A. Two thirdsB. Simple majorityC. Three quartersD. Half: Simple Majority
45. If a customer has a 2-node cluster, which of the following must be enabled for storage failover (SFO) to functionproperly?A. cluster ha modify -configured trueB. cluster modify -node -eligibility trueC. storage failover modify -node enabled trueD. storage failover modify -node -hwassist true: cluster ha modify - configured true
46. In a 2-node cluster with cluster HA enabled, which node has Epsilon by default?A. the first node to join the clusterB. the node that's been running for the longest amount of timeC. the node serving as mgwd ring masterD. the node with the lower system IDE. neither node: neither node
47. In clustered Data ONTAP 8.2 or later, what is largest number of nodes that can be supported with any enabled SANprotocols?A. 4B. 6C. 8D. 10E. 12F. 24: 8
48. In clustered Data ONTAP 8.2, an aggregate by default is _________.A. 32 bit, RAID DP, Snapshot reserve 0B. 32 bit, RAID 4, Snapshot reserve 0C. 64 bit, RAID 4, Snapshot reserve 0D. 64 bit, RAID DP, Snapshot reserve 0: 64-bit, RAID DP, Snapshot reserve 0
49. In clustered Data ONTAP 8.2, what is the maximum number of cluster nodes if any SAN protocols are being used?A. 2 nodeB. 4 nodesC. 6 nodesD. 8 nodesE. 10 nodesF. 24 nodes: 8 nodes
50. In clustered Data ONTAP 8.2, which of the following commands will restore an entire volume?A. volume snapshot promoteB. volume snapshot restoreC. volume snapshot resyncD. None of the above, just use the .snapshot or ~snapshot directory to restore the entire volume: volume snapshot restore
51. In clustered Data ONTAP, snapshots are scheduled by creating (Choose 2)A. A snapshot policy within the vserver that applies to all volumes in the vserverB. A snapshot policy within the vserver that is applied at the volume levelC. A snapshot policy within the clustershell that can be used by every vserver but applied individually at the volume levelD. A snapshot policy within the clustershell that can be used by each vserver but applies to all volumes within thevserver: A snapshot policy within the clustershell that can be used by every vserver but applied individually at the volume level, A snapshotpolicy within the clustershell that can be used by each vserver but applies to all volumes within the vserver
52. In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:A. Vserver root volumeB. Absolute path of the volumeC. Aggregate name for the volumeD. Junction path for the volume: Junction path for the volume
53. In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:A. Vserver root volumeB. Absolute path of the volumeC. Aggregate name for the volumeD. Junction path name for the volume: junction path name for the volume
54. In clustered Data ONTAP, which object exposes data to clients?A. A high-available pair of storage controllersB. An admin vserverC. A node vserverD. A data vserver: A data vserver
55. In clustered Data ONTAP, which object presents data to clients?A. A high-available pair of storage controllersB. A virtual serverC. A virtual filerD. A cluster: a virtual server
56. In clustered Data ONTAP, which prompt verifies that you are in the cluster shell if the cluster is named "netappu"?A. netappu-01%B. netappu-01>C. netappu-01::>D. netappu::>: netappu::>
57. In clustered ONTAP 8.2, which statement is true about backup vaults?A. Only work on qtreesB. Work on all volumesC. Only work on FlexVol volumesD. Only work on Infinite volumesE. None, clustered ONTAP doesn't support SnapVault: only work on FlexVol volumes
58. In clustered ONTAP, what benefit does NFSv4.1 pNFS provide?A. Reduces I/O traffic over the NVRAM connection in a HA pairB. Reduces I/O traffic over the management networkC. Reduces I/O traffic over the network moduleD. Reduces I/O traffic over the data moduleE. Reduces I/O traffic over the cluster interconnect: reduces I/O traffic over the cluster interconnect
59. In clustered ONTAP, what object exposes data to clients?A. A high-available pairB. A virtual storage server (Vserver)C. A virtual filer (vFiler)D. A cluster: a virtual storage server (vserver)
60. In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum cluster size for SAN protocols? (Choose 3)A. 10 nodesB. 6 nodesC. 2 nodesD. 4 nodesE. 8 nodesF. 12 nodes: 6 nodes, 2 nodes, 4 nodes
61. In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum node size for SAN protocols? (Choose 3)A. 24 nodesB. 12 nodesC. 8 nodesD. 6 nodesE. 4 nodesF. 2 nodes: 6 nodes, 4 nodes, 2 nodes
62. In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum TCP read size for an NFSv3 client?A. 1,048,576 bytesB. 32,768 bytesC. 65,536 bytesD. 2,097,152 bytes: 1,048,576 bytes
63. In transitioning SnapVault relationships from 7-mode to clustered Data ONTAP, which statements are true? (Choose 3)A. You are required to re-create all Snapvault relationships with new baselineB. You can plan on fan-in relationships of many source volume to one destination volumeC. You can plan on fan-in relationships at the system level, many volumes to one VserverD. You can plan on SnapMirror to SnapVault cascades: You are required to re-create all Snapvault relationships with new baseline,You can plan on fan-in relationships at the system level, many volumes to one Vserver, You can plan on SnapMirror to SnapVault cascades
64. In which shell can administrators natively run Data ONTAP 7-mode commands?A. node shellB. system shellC. cluster shellD. admin shellE. diag shell: node shell
65. In which shell can administrators natively run Data ONTAP 7-Mode commands?A. nodeshellB. systemshellC. clustershellD. adminshell: nodeshell
66. Junctions are used to join volumes to ...A. Form a namespaceB. A node vserverC. UNIX clientsD. CIFS clients: form a namespace
67. Logical interfaces support which three types of resources?A. ClusterB. Cluster-routesC. Failover groupsD. Group-routesE. Interface groupsF. PortG. VLANH. VServer-router: Interface Groups, Port, VLAN
68. Name two modes of BranchCache.A. HostedB. DistributedC. interclusterD. Vserver-aware: Hosted, Distributed
69. NAS clients see junctions as ______________ in the parent volume.A. VserversB. NodesC. Sub-VolumesD. Directories: Sub-Volumes
70. Netapp Remote Support Agent (RSA) is supported which two FAS module types?A. BMCB. ILOC. RLMD. RTCE. SP: RLM, SP
71. The network interface show command output lists the value of "false" under the "Is Home" column. False signifies theLIF __________. (Choose 2)A. is disconnectedB. has failed overC. is administratively disabledD. has been migratedE. is currently being migrated to home node: has failed over, has been migrated
72. New systems are shipped with the root volume in a 64-bit aggregate starting with which Data ONTAP release?A. 8.0.0B. 8.0.1C. 8.0.2D. 8.1: 8.1
73. NFSv4.1 pNFS reduces traffic over which network?A. cluster networkB. data networkC. InfiniBand networkD. management network: cluster network
74. On the FAS6290 series controllers, what reference tool lists the on-board 10GbE ports used for the cluster network?A. Tech.netwpp.comB. Portconfiguration.netapp.comC. HWU.netapp.comD. FieldPortal.netapp.comE. NetApp Cluster Port Usage GuideF. Synergy: HWU.netapp.com
75. On which component the QoS can be applied? (choose 2)A. vserverB. nodeC. volumeD. qtreeE. aggregateF. LUNG. igroup: volume, LUN
76. One node of a 2-node cluster is shut down to replace a NIC. All RDB rings fall out of quorum. To diagnose the problem,what should the administrator do first?A. Disconnect and reconnect the InfiniBand cableB. Issue storage failover show from the clustershellC. Issue cluster ha show from the clustershellD. Verify that the cluster switch is functioning properly: Issue cluster ha show from the clustershell
77. Possible roles for Single-Node Cluster: (Choose 3)A. ProductionB. DevelopmentC. TestingD. ABM: Development, Testing, ABM
78. Prior to breaking a SnapMirror DP relationship, which statement is true about mounting thedestination volume?A. It can be mounted in the namespace of any Vserver in the source- or destination cluster.B. It cannot be mounted until after the SnapMirror break is performed.C. It can be mounted in the namespace of the destination Vserver.D. It can be mounted only in the same namespace as the source volume.: It can be mounted in the namespace of the destinationVserver.
79. Protocol access is provided to data via what?A. ClusterB. A virtual filerC. A Virtual ServerD. A high-available pair of storage systems: a virtual server
80. The root volume of a node in the cluster is called __________.A. vs_rootB. mhostC. vol0D. rootvol: vol0
81. The root volume of a node in the cluster is namedA. vs_rootB. mhostC. rootvolD. vol0: vol0
82. Select the following statements that are true about unplanned storage failover (SFO). (Choose 2)A. The "down" system is entirely virtually hosted by the HA partner and appears to be "up".B. The data LIFs are always migrated to the HA partnerC. The surviving partner assumes ownership of the failed partners aggregatesD. The volume location database (VLDB) is updated with the new location of the aggregates and volumes: The survivingpartner assumes ownership of the failed partners aggregates, and The volume location database (VLDB) is updated with the new location ofthe aggregates and volumes
83. SnapVault backup between two different clustered Data ONTAP 8.2 or later systems requires what type of interclustercommunication?A. Cluster Vaulting LIFs for intercluster communicationB. Cluster Replication LIFs for intercluster communicationC. Cluster Peering LIFs for intercluster communicationD. Cluster Backup LIFs for intercluster communication: Cluster Peering LIFs for intercluster communication
84. SnapVault backup of a clustered Data ONTAP 8.2 or later system is done at what data set level?A. AggregateB. DirectoryC. FlexVolD. Qtree: FlexVol
85. A storage administrator create a Quality of Service ( QoS) policy named pgMB300 which sets a maximum throughput of300MB/s, and a second Quality of Service policy named pglO200 which sets the maximum throughput to 200 IOPS. Thestorage administrator assigns the pgMB300 QoS policy to Vserver vs1. The storage administrator then attempts toassign the pglO200 QOS policy to vol1 of vs1. What is the outcome?A. The attempt will succeed. You can assign Qos policy to storage object so long as single object does not have multiplepolicy groups assigned to it.B. The attempt will fail. You cannot have policies with differently maximum throughput units. They all have to be MB/sor all have to be IOPS.C. The attempt will succeed. You can nest IOPS policy limit instead a MB/s policy limit.D. The attempt will fail. You cannot nest policy groups in any manner.: The attempt will fail. You cannot nest policy groups inany manner.
86. Storage QOS maximum throughput limits can be defined in terms of:A. IOPS onlyB. MB/s onlyC. IOPS or MB/sD. IOPS and MB/s: IOPS or MB/s
87. The system image show command output lists the value of "true or false" under the "Is Current" column. The imagemarked "true" indicates the image:A. Is currently bootedB. Is the latest versionC. Will used after a rebootD. Has just been downloaded: is currently booted
88. To maintain a cluster quorum, Epsilon functions as a ________.?A. duplicated management databaseB. master nodeC. secondary nodeD. tie-breaker: tie-breaker
89. To operate DATA ONTAP 8.1 Cluster Mode SAN, what must be configured on both the initiator and the target?A. Logical Unit Access InitializationB. Physical Unit Access InitializationC. Symmetric Logical Unit AccessD. Asymmetric Logical Unit AccessE. SAN Access Initialization Protocol: Asymmetric Logical Unit Access
90. To support multi-tenancy, an administrator must create or enable which type of unique login account?A. vsadmin, for the clusterB. admin, for each VserverC. admin, for the clusterD. vsadmin, for each vserver: vsadmin, for each vserver
91. Using the following path: /users/sales/a1/smith, which are the two possible path types for "a1"?A. A directoryB. A fileC. A LUND. A qtree: a directory, a qtree
92. The vifMgr is out of quorum on the node that is the master for the vifMgr ring. Which of the following statements aretrue? (Choose 2)A. A new master will be elected for the vifMgr RDB unitB. Epsilon will not be available in the clusterC. Clients can access data through the LIFs on this nodeD. A new LIF can be created for a data vserver: A new master will be elected for the vifMgr RDB unit, Clients can access data throughthe LIFs on this node
93. The VLDB is out-of-quorum on the node serving as the master of the VLDB ring. Which four statements are true?A. A new VLDB ring master is elected.B. Clients can write to volumes on that node.C. Volumes cannot be moved to or from that node.D. Clients can read from volumes hosted on that node.E. New volumes can be created on aggregates hosted on that node.: A new VLDB ring master is elected., Clients can write tovolumes on that node., Volumes cannot be moved to or from that node., Clients can read from volumes hosted on that node.
94. A volume is created named "new_acct" in a data vserver named vs2. A junction for this volume is created named "acct"from the root of vs2. This namespace will be mounted on a Linux host. What is the path that the Linux host needs tomount?A. /vs2/new_acctB. /vs2/acctC. /new_acctD. /vol/vs2/new_acctE. /acct: /acct
95. A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2 namespace at /vs2/vol2. Volumemove moves this volume to the netappu-01 aggregate. What is the path to this volume after the move?A. /netappu-01/vs2/vs2_vol2B. /vs2/vol2C. /vol/vs2_vol2D. /vol/vs2/vs2_vol2: /vs2/vol2
96. A volume named volume217 resides on an aggregate named node7_aggr12 and is mounted in the namespace at junction/source/april/test217. A file named revert.cpp is at the root of volume217. A volume move operation relocates volume217to node3_aggr3. What is the fully qualified path to revert.cpp after the move is complete?A. /node3_aggr3/source/april/test217/revert.cppB. /node3_aggr3/volume217/revert.cppC. /source/april/test217/revert.cppD. /vol/source/april/test217/revert.cppE. /vol/volume217/revert.cpp: /source/april/test217/revert.cpp
97. A volume named vs2_vol2 is created on the netappu-02 aggregate. The path in the vs2 namespace is /vs2/ vol2. If thevolume is moved to the netappu-01 aggregate, what is the path after the move?A. /netappu-01/vs2/vs2_vol2B. /vs2/vol2C. /vol/vs2_vol2D. /vol/vs2/vs2_vol2: /vs2/vol2
98. Volumes can be moved from 32-bit aggregates to which two types of aggregates?A. 32-bit aggregatesB. 64-bit aggregatesC. Flex aggregatesD. Traditional aggregates: 32-bit aggregates, 64-bit aggregates
99. What are four characteristics of a NAS LIF?A. It has a logical interface connection.B. It can be associated with a Fibre Channel port.C. It can be associated with a WWPN.D. It can be associated with an Ethernet port.E. It can be associated with an interface group (ifgrp)F. It can be associated with an IP address.: It has a logical interface connection, It can be associated with an Ethernet port, It can beassociated with an interface group (ifgrp), It can be associated with an IP address.
100. What are four storage efficiency features Data ONTAP 8.1 Cluster-Mode provides?A. transparent filesB. thin provisioningC. SnapVaultD. FlexCloneE. deduplicationF. compression: thin provisioning, FlexClone, deduplication, compression
101. What are four storage efficiency features that Data ONTAP 8.1 or latter Cluster-Mode provides ?A. transparent filesB. thin provisioningC. SnapVaultD. FlexCloneE. deduplicationF. compression: thin provisioning, FlexClone, deduplication, compression
102. What are some of the benefits to customers when using clustered Data ONTAP?A. ScalabilityB. TransparencyC. FlexibilityD. Non-disruptive operations: Scalability, Transparency, Flexibility, Non-disruptive operations
103. What are the characteristics of Snapmirror? (Choose 3)A. Provides data protection for disaster recoveryB. If the source FlexVol volume is lost, clients can restore data from the secondary to primary storageC. Can asynchronously copy the source FlexVol volume to a disaster recovery replicaD. If the source FlexVol volume is lost or destroyed, clients can connect to the mirror image of the source data: Providesdata protection for disaster recovery, Can asynchronously copy the source FlexVol volume to a disaster recovery replica, If the sourceFlexVol volume is lost or destroyed, clients can connect to the mirror image of the source data
104. What are the four replicated database rings in a cluster?A. administratorB. logical-interface manager (lifmgr)C. management application (mgmt)D. protocol management daemon (prtodb)E. SAN management deamon (bcomd)F. virtual-interface manager (vifmgr)G. volume location database (vldb): management application (mgmt), SAN management deamon (bcomd), virtual-interface manager(vifmgr), volume location database (vldb)
105. What are the LIF roles that can be assigned to ports in clustered ONTAP?A. DataB. Cluster managementC. ClusterD. Node managementE. Intercluster: Data, Cluster management, Cluster, Node management, Intercluster
106. What are the LIF roles that can be assigned to ports in Data ONTAP Cluster-Mode?A. DataB. Cluster managementC. ClusterD. Node managementE. Intercluster: data, cluster management, cluster, node management, intercluster
107. What are the roles that can be assigned to physical ports in clustered ONTAP? (Choose 4)A. DataB. Cluster managementC. ClusterD. Node-managementE. Intercluster: Data, Cluster, Node-management, Intercluster
108. What are the three types of resources supported by Logical interfaces? (Choose 3)A. VServer-routesB. portC. Interface groupsD. failover groupsE. cluster-routesF. clusterG. group-routesH. VLAN: port, interface groups, VLAN
109. What are the three types of Vservers in clustered Data ONTAP 8.2?A. System VserverB. Node VserverC. Admin VserverD. Data VserverE. Management VserverF. Cluster Vserver: Node vservers, Admin vservers, Data vservers
110. What are the three types of Vservers in clustered ONTAP?A. Node VserverB. Admin VserverC. Data VserverD. System Vserver: Node vserver, admin vserver, data vserver
111. What are three types of resource supported by logical interfaces?A. VServer-routesB. portC. Interface groupsD. failover groupsE. cluster-routesF. clusterG. group-routesH. VLAN: port, interface groups, VLAN
112. What are three types of Vservers?A. vFilerB. nodeC. interclusterD. clusterE. adminF. data: node, admin, data
113. What are two capabilities of Vserver setup?A. It licenses Vserver functionalityB. It joins an exisiting Vserver to the cluster.C. it creates a new Vserver that can host FCP LUNs.D. It creates a new cluster VserversE. It configures an existing Vserver: It creates a new cluster vservers, it configures an existing vserver
114. What are two defaults for a new Data ONTAP 8.1 or later system root aggregate?A. 32-bitB. 64-bitC. 0% aggr reserveD. 5% aggr reserve: 64-bit, 0% aggr reserve
115. What are two ways a storage administrator can improve the operational availability of NAS application data?A. By backing up data to a USB diskB. By configuring ALUA on the hostC. By providing multiple data logical interfacesD. By utilizing the volume move feature: By providing multiple data logical interfaces, By utilizing the volume move feature
116. What CLI command restores entire volume from a snapshot copy:A. Volume snapshot restoreB. Volume snapshot promoteC. Volume snapmirror restoreD. Volume snapmirror resync: volume snapshot restore
117. What command is used to show an iSCSI software initiator WWPN?A. iSCSI show nodenameB. iscsiadm show WWPNC. iscsiadm -m nodeD. iSCSI does not use a WWPN: iSCSI does not use a WWPN
118. What command starts recording the current CLI session into a file?A. system cli recordB. system record startC. system script recordD. system script start: system script start
119. What communication link is necessary in order to establish an inter-cluster relationship?A. The cluster interface on each node must be able to communicate with the intercluster interface on each node in theboth the source and destination clustersB. The cluster interface on the source cluster must be able to communicate with the cluster interface on the destinationclusterC. The intercluster interface on the source cluster must be able to communicate with the intercluster interface on thedestination clusterD. The intercluster interface on the source cluster must be able to communicate with the cluster interface on thedestination cluster: The intercluster interface on the source cluster must be able to communicate with the intercluster interface on thedestination cluster
120. What communication link is necessary in order to establish cluster peer relations between two clusters?A. The cluster interface on each node must be able to communicate with the intracluster interface on each node in thepeer cluster.B. The cluster interface on each node must be able to communicate with the node-mgmt interface on each node in thepeer clusterC. The intracluster interface on each node must be able to communicate with the intracluster interface on each node inthe peer cluster.D. The intercluster interface on each node must be able to communicate with the intercluster interface on each node inthe peer cluster.: The intercluster interface on each node must be able to communicate with the intercluster interface on each node in thepeer cluster.
121. What does Storage Failover Allow?A. disk to fail over between HA partnersB. disk to fail over to a plexC. disk to fail over to any node in a clusterD. disk to fail over to the Epsilon node: disk to fail over between HA partners
122. What feature balances load across a cluster while consuming less disk capacity than LS SnapMirror copies?A. SnapVAult copiesB. FlexCache softwareC. FlexClone copiesD. DP SnapMirror copies: FlexCache software
123. What happens if a Load-Sharing (LS) mirror replies a Vserver root volume to any node in the cluster and you promoteone of the mirror destinations?A. All clients temporarily gain read/write access to the root volumeB. The original source volume is prevented from becoming stale.C. All clients must re mount.D. There is no disruption for any connected clients.: All clients temporarily gain read/write access to the root volume
124. What is a LIF? (Choose 4)A. A logical interface connectionB. A logical inter-fabric connectionC. May be associated with a IP addressD. May be associated with a WWPNE. May be associated with a interface group: A logical interface connection, may be associated with a IP address, may be associatedwith a WWPN, and may be associated with a interface group
125. What is aggregate relocation (ARL)? (Choose 2)A. Provides zero copy, non-disruptive relocation of (non-root) online SFO aggregates to a partner nodeB. Provides zero copy, non-disruptive relocation of (root) online CFO aggregates to a partner nodeC. Is utilized during planned events such as fast negotiated takeovers, controller hardware upgrades, and othermaintenance operations D. Is utilized during unplanned events such as controller failure: Provides zero copy, non-disruptive relocation of (non-root)online SFO aggregates to a partner node, and is utilized during planned events such as fast negotiated takeovers, controller hardwareupgrades, and other maintenance operations
126. What is considered a node in a clustered ONTAP?A. An HA storage controller pairB. A single storage controllerC. A data VserverD. A data port: a single storage controller
127. What is considered when selection LS mirror copy? (Choose 3)A. If an LS mirror copy is on the same node as the network module that fields the request, the network module uses thatLS mirror copyB. If a write request goes to LS mirror, It forward it to flexvolC. if no LS mirror copy is on the same node as the network module that fields the request, the network module uses anup-to-date LS mirror copy on another node.D. If a write request goes to LS mirror, it returns error.: If an LS mirror copy is on the same node as the network module that fieldsthe request, the network module uses that LS mirror copy, if no LS mirror copy is on the same node as the network module that fields therequest, the network module uses an up-to-date LS mirror copy on another node, If a write request goes to LS mirror, it returns error.
128. What is the command to start recording the current CLI session into a file?A. system cli recordB. system script recordC. system script startD. system record start: system script start
129. What is the default cluster shell account?A. rootB. administratorC. userD. admin: admin
130. What is the default shell for accessing clustered Data ONTAP? A. DiagnosticB. NodeC. ClusterD. SystemE. Admin: cluster
131. What is the default shell for accessing clustered ONTAP?A. SPshellB. NodeshellC. ClustershellD. Systemshell: clustershell
132. What is the default system account?A. rootB. narootC. administratorD. admin: admin
133. What is the file extension for NDMP backup CAB (Cluster Aware Backup Extension)A. CABB. BACC. CAPD. NDBC: CAB
134. What is the first step for setting up a cluster Data ONTAP 8.2?A. Cluster SetupB. Join ClusterC. Install second nodeD. Enable HA: Cluster Setup
135. What is the GUI-based interface that manages a cluster?A. Cluster BenchB. Device ManagerC. FilerViewD. Node StudioE. System Manager: System Manager
136. What is the maximum number of node a SAN cluster in Data ONTAP 8.2 can have?A. 1B. 2C. 6D. 8E. 16F. 24G. 32: 8
137. What is the maximum number of nodes a NAS cluster can have?A. 1B. 2C. 4D. 8E. 16F. 24G. 32: 24
138. What is the maximum number of nodes a SAN cluster in DOT 8.1 can have?A. 1B. 2C. 6D. 8E. 16F. 24G. 32: 6
139. What is the maximum number of nodes in a cluster that the Cisco Nexus 5010 supports?A. 12B. 18C. 20D. 24: 18
140. What is the maximum number of nodes supported for a cluster serving only NAS protocols?A. 1B. 2C. 4D. 8E. 16F. 24: 24
141. What is the maximum number of nodes supported for clustered Data ONTAP 8.2 serving only NAS protocols?A. 1B. 2C. 4D. 6E. 16F. 24: 24
142. What is the maximum number of nodes supported for clustered ONTAP 8.2 serving both SAN and NAS protocols?A. 1B. 2C. 4D. 6E. 8F. 24: 8
143. What is the minimum number of disks in a non-root aggregate with RAID-DPA. 2B. 3C. 5D. 8E. 12: 8
144. What is the supported speed and frame size on the cluster interconnect?A. 1 Gb / 1500 mtuB. 1 Gb / 9000 mtuC. 10 Gb / 1500 mtuD. 10 Gb / 9000 mtuE. No specific requirements: 10 Gb / 9000 mtu
145. What kind of structure can be deduplicated?A. A diskB. An aggregateC. A FlexVolD. a qtree: a FlexVol
146. What must be configured in clustered ONTAP 8.2 to support inter-cluster Snapmirror relationships? (Choose 2)A. Cluster peering relationshipB. Intercluster port roleC. Junction path for the mirrored volumeD. Minimum transfer sizeE. Vserver peering relationship: Cluster peering relationship & Vserver peering relationship
147. What must be configured on the igroup in a multi-pathed SAN environment in clustered Data ONTAP?A. Asymmetric logical unit accessB. Symmetric logical unit accessC. Dynamic multi-path accessD. LIF multi-path accessE. LUN multi-path access: Asymmetric logical unit access
148. What must be configured to support cross-cluster SnapMirror relationships?A. cluster peer relationshipB. intracluster portC. junction pathD. minimum transfer size: cluster peer relationship
149. What must be configured to support inter-cluster Snapmirror relationships?A. Cluster peer relationshipB. Intercluster port roleC. Junction path for the mirrored volumeD. Minimum transfer size: cluster peer relationship
150. What must be define in order to create a NFS export within Cluster-Mode?A. An entry in the /etc/exports fileB. An export policy and rules under a VserverC. An export policy and rules under the FreeBSD shellD. An export policy and rules under the node shellE. export rules that are associated with a LIF: An export policy and rules under a Vserver
151. What should an administrator do first before shutting down two nodes of a 4-node cluster?A. Migrate node-management LIFs to a node that is staying upB. Move Vserver root volumes to a node that is staying upC. Reassign the master of all RDB rings to a node that is staying upD. Set both nodes that are coming down to "ineligible": Set both nodes that are coming down to "ineligible"
152. What three cluster administrator roles are predefined?A. adminB. backupC. noneD. readonlyE. rootF. vsaadmin: admin, none, readonly
153. What three privilege levels are found in clustered Data ONTAP?A. adminB. advancedC. backupD. diagnosticE. manageF. single_user: admin, advanced, diagnostic
154. What three protocols obtain the Data ONTAP software image?A. CIFSB. FTPC. HTTPSD. HTTPE. NFS: FTP, HTTPS, HTTP
155. What three statements are true about LIF failover?A. A data Ethernet LIF fails over when the cluster is in quorum.B. A cluster management Ethernet LIF fails over when a port is down.C. A cluster management Ethernet LIF will never automatically revert back to its home port.D. A data Ethernet LIF will not revert back by default to its home port.E. A node management Ethernet LIF fails over when a port is down.F. A node management Ethernet LIF will never automatically revert back to its home port.: A data Ethernet LIF fails overwhen the cluster is in quorum., A data Ethernet LIF will not revert back by default to its home port., A node management Ethernet LIF willnever automatically revert back to its home port.
156. What three statements are true about LIF failover? (Choose 3)A. A node management Ethernet LIF will never automatically revert back to its home port.B. A node management Ethernet LIF can fail over to its partner node when a port is down.C. A data Ethernet LIF will not automatically revert back to its home port.D. A cluster management Ethernet LIF will never automatically revert back to its home portE. A cluster management Ethernet LIF can fail over when a port is down.F. A data Ethernet LIF can fail over when the cluster is in quorum.: A node management Ethernet LIF can fail over to its partnernode when a port is down, A data Ethernet LIF will not automatically revert back to its home port, A cluster management Ethernet LIF canfail over when a port is down.
157. What tool can be used to map IQNs to LUNs for a Vserver?A. Protection ManagerB. OnCommand System ManagerC. Operations ManagerD. Unified Element Manager: OnCommand System Manager
158. What two actions should an administrator take before shutting down two nodes of a 4-node cluster?A. reassign the master of all RDB rings to a node that will be staying upB. migrate node-management LIFs to a node that will be staying upC. move Vserver root volumes to a node that will be staying upD. set both nodes that are coming down to "ineligible"E. ensure that Epsilon is assigned to one of the nodes that will be staying up: set both nodes that are coming down to"ineligible", ensure that Epsilon is assigned to one of the nodes that will be staying up
159. What type of configuration is required for SnapVault backup between clusters in two different clustered Data ONTAP orlater systems?A. Vserver Peer ConfigurationB. SnapVault Peer ConfigurationC. Backup Peer ConfigurationD. Cluster Peer Configuration: cluster peer configuration
160. What type of LIF is used to replicate between two clusters?A. nodeB. clusterC. interclusterD. cluster-mgmtE. data: intercluster
161. What's the minimum System Manager version to access cluster 8.2?A. System Manager 1.0B. System Manager 2.2C. System Manager 2.0D. System Manager 3.0: System Manager 2.2
162. When a client goes through a junction, the client has entered:A. A different VserverB. A different volumeC. A different junctionD. A different cluster: a different volume
163. When a client transverses a junction, the client has entered:A. a different VserverB. a different volumeC. a different junctionD. a different cluster: a different volume
164. When a cluster is in quorum, what portion of participating nodes are healthy?A. Two thirdsB. Simple majorityC. Three quartersD. Half: Simple majority
165. When a pNFS 4.1 client is connected to a LIF on node 2 of an 8 node clustered Data ONTAP pNFS 4.1 Vserver, and thedata volume being read is moved to node 1, which statement is true?A. The client redirects from a LIF on node 2 to a LIF on node 1 if available and continues data access uninterrupted.B. The client stays connected to a LIF on node 2 and accesses the data on node 1 through the cluster network.C. DNS records are updated and the client moves access to a LIF on node 1 from DNS referral.D. When a data volume is moved, only CIFS clients are affected.: The client redirects from a LIF on node 2 to a LIF on node 1 ifavailable and continues data access uninterrupted.
166. When a pNFS client is connected on a LIF on node 1 of a 4-node clustered Data ONTAP pNFS 4.1 vServer, and node 2performs a storage takeover (SFO) of node 1, and LIFs fail over to node 3, which statement is true?A. This mount goes stale.B. The client waits for node 1 to come back up.C. The pNFS redirects access to a LIF on node 2.D. The client accesses the virtual IP of the cluster which handles access to the data during the failure.: The pNFS redirectsaccess to a LIF on node 2.
167. When creating a LIF for NFS or CIFS, what is the default failover policy?A. PriorityB. NextavailC. Round robinD. Disabled: Nextavail
168. When storage failover (SFO) occurs and cluster mode SAN protocols are enabled on a data vserver:A. ALUA determines that the HA partner is an active direct pathB. ALUA determines that the HA partner is an active indirect pathC. ALUA determines the best path for active optimize LUN access even if it requires use of thecluster interconnectD. ALUA does not factor into the path selection during Storage Failover (SFO): ALUA determines that the HA partner is anactive direct path
169. When using Data ONTAP 8.1 Cluster-Mode and later, what is the default for new aggregates?A. 32-bit aggregatesB. 64-bit aggregatesC. 128-bit aggregatesD. cluster aggregatesE. traditional aggregatesF. Vserver aggregates: 64-bit aggregates
170. Where can NDMP backups be performed?A. Within the data VserverB. Within the cluster VserverC. From any node in the clusterD. From the node that owns the volume: from the node that owns the volume
171. Which aggregate type is supported for Flash Pool?A. TraditionalB. 32-bitC. 64 bitD. 128-bit: 64 bit
172. Which are predefined roles for cluster administrators in clustered ONTAP 8.2? (Choose 4)A. adminB. read onlyC. vsadminD. vsadmin-backupE. vsadmin-readonlyF. backupG. vsadmin-autosupportH. none: admin, read only, backup, none
173. Which are the role types that can be assigned to ports in clustered ONTAP? (Choose 3)A. DataB. Cluster-managementC. ClusterD. Node-management: Data, Cluster, Node-management
174. Which are two requirements for the Cluster-Mode solution?A. Thunderbolt or LightPeak cabling with backplane interface on storageB. Management switchesC. InfiniBand cabling with backplane interface for all storage systemsD. FC Cluster switchesE. Cluster switches: InfiniBand cabling with backplane interface for all storage systems, Cluster switches
175. Which are types of failover groups? (choose 3)A. System-definedB. User-definedC. Next AvailableD. PriorityE. Clusterwide: System-defined, user-defined, clusterwide
176. Which boot argument toggles between 7-Mode and Cluster-Mode configurations?A. bootarg.init.boot_gxB. bootarg.init.boot_7-modeC. bootarg.init.boot_cluster-modeD. bootarg.init.boot_clustered: bootarg.init.boot_clustered
177. Which built-in user can access the system shell?A. adminB. rootC. diagD. vserver-admin: diag
178. Which clustered ONTAP objects are "owned" by a data Vserver? (Choose 3)A. AggregatesB. VolumesC. LUNsD. PortsE. LIFsF. ShelvesG. Disks: Volumes, LUNs & LIFs
179. Which command can be used to identify the target iqn name in Data ONTAP 8.1 Cluster-Mode and later?A. cluster iscsi nameB. cluster iscsi nodenameC. cluster iscsi showD. vserver iscsi nodenameE. vserver iscsi nameF. vserver iscsi show: vserver iscsi show
180. Which command configures the Remote Support Agent (RSA)?A. rsa initB. system services webC. system services rsaD. vserver services rsa: rsa init
181. Which commands can be used to create a data Vserver? (Choose 2)A. vserver configureB. vserver setupC. vserver set_upD. vserver makeE. vserver create: vserver setup, vserver create
182. Which commands can be used to identify the target iqn name in clustered Data ONTAP?A. cluster iscsi showB. cluster iscsi nodenameC. vserver iscsi nodenameD. vserver iscsi showE. vserver iqn show: vserver iscsi show
183. Which configurations are supported in clustered ONTAP 8.2? (Choose 3)A. Single-node clustersB. Switchless 2-node clustersC. Switchless 4-node clustersD. 5-node clustersE. 8-node clusters with NAS and SANF. 24-node clusters with NAS and SAN: single-node clusters, switchless 2-node clusters, 8-node clusters with NAS and SAN
184. Which Data ONTAP Cluster-Mode clone technology can clone an individual LUN Inside a volume without cloning theentire volume?A. FlexCloneB. LUN CloneC. Snap CloneD. Vol CloneE. Aggr Clone: LUN Clone
185. Which Data ONTAP Cluster-Mode clone technology will lock a Snapshot copy?A. LUN CloneB. Snapshot CloneC. Volume CloneD. Aggr Clone: LUN clone
186. Which description of clustered Data ONTAP 8.2 Infinite Volume (InfiniVol) is true?A. Infinite Volume Vservers can share aggregatesB. Infinite Volume Vservers use Traditional volumesC. Infinite Volume Vservers and FlexVol Vservers can co-exist in the same clusterD. Infinite Volume Vservers and FlexVol Vservers cannot co-exist: Infinite volume vservers and FlexVol vservers can co-exist inthe same cluster
187. Which feature is NOT supported by clustered Data ONTAP 8.2?A. Synchronous SnapMirrorB. Data Protection MirrorsC. Load Sharing MirrorsD. Non-disruptive upgrades: synchronous SnapMirror
188. Which feature makes it possible for a storage administrator to add more than storage systems to a cluster?A. Scale horizontalB. Scale outC. Scale upD. Scale vertical: scale out
189. Which feature must be enabled on a FC switch when using the FC protocol with clustered Data ONTAP 8.1?A. FL_Port ID VirtualizationB. N_Port ID Virtualization (NPIV)C. FC over IPD. FC over EthernetE. None of the above: N_Port ID Virtualization (NPIV)
190. Which five protocols are supported by Data ONTAP 8.1 Cluster-Mode or later?A. CIFSB. FCC. FCIPD. FCoEE. iFCPF. iSCSIG. NFS: CIFS, FC, FCoE, iSCSI, NFS
191. Which four features does Cluster-Mode support? (Choose 4)A. Data protection mirrorsB. Load-sharing mirrorsC. NDMP tape backupD. Non-disruptive upgradesE. Synchronous SnapMirror: Data protection mirrors, Load-sharing mirrors, NDMP tape backup, Non-disruptive upgrades
192. Which four statements are true about a node's vol0 volume?A. It cannot be moved with the volume move command.B. It contains RDB databases and log files.C. It is the most efficient place to store critical user data.D. It is not part of the namespace.E. One exists on every node in the cluster.: It cannot be moved with the volume move command, It contains RDB databases and logfiles, It is not part of the namespace, One exists on every node in the cluster.
193. Which four steps must an administrator take before establishing a CIFS share?A. Create a volumeB. Configure a share policy with the desired valuesC. Configure an export policyD. Configure name mappingE. Enable Active Directory routingF. Mount a volume within the Vserver namespaceG. Set a default share policy: create a volume, configure an export policy, configure name mapping, mount a volume within the vservernamespace
194. Which is a supported management switch?A. Brocade 8000B. Brocade FLS624C. Cisco Nexus 5010D. Cisco Nexus 7000E. Cisco Catalyst 2960F. Cisco Nexus 5020: Cisco Catalyst 2960, Cisco Nexus 5020
195. Which LIF is associated with the admin vserver?A. Admin LIFB. Data LIFC. Cluster management LIFD. Cluster LIFE. Node management LIF: cluster management LIF
196. Which logical interface does not have migration nor failover migration capabilities?A. cluster managementB. node managementC. dataD. target: node management
197. Which logical interface is created when you create a single-node clustered Data ONTAP system during cluster setup?A. Two cluster LIFsB. An intercluster LIFC. A data LIFD. A cluster management LIF: a cluster management LIF
198. Which logical interfaces have failover and online migration capabilities in a different node? (Choose 2)A. ClusterB. Cluster managementC. Data (FC, iSCSI)D. Data (CIFS, NFS)E. Node-management: cluster management, data (CIFS, NFS)
199. Which make up the replicated database (RDB) rings in a cluster? (Choose 4)A. protocol management daemon (protdb)B. management application (mgmt)C. administration (admdb)D. volume location database (vldb)E. virtual-interface manager (vifmgr)F. logical-interface manager (lifmgr)G. SAN management daemon (bcomd): management application (mgmt), volume location database (vldb), virtual-interface manager(vifmgr), SAN management daemon (bcomd)
200. Which NetApp Virtual Storage Tier component works aggregate-wide on a FAS controller?A. Flash I/OB. Flash CacheC. Flash AccelD. Flash DiskE. Flash Pool: Flash Cache
201. Which NetApp Virtual Storage Tier component works at the host level?A. Flash PoolB. Flash IOC. Flash DiskD. Flash AccelE. Flash Cache: Flash Accel
202. Which of the following are appropriate client specification for an export rule?A. 0.0.0.0/0B. 192.168.5.0/24C. .eng.netapp.comD. \\vs_root\192.168.153.128: 0.0.0.0/0, 192.168.5.0/24, .eng.netapp.com
203. Which of the following are types of failover groups? (Choose 3)A. System definedB. User definedC. Next AvailableD. PriorityE. Clusterwide: System defined, User defined, and Clusterwide
204. Which of the following is a feature of NFS 4.1?A. ACLs are not usedB. Clients can re-acquire a delegation without re-opening a fileC. Symbolic links are not supportD. Traffic can occur over Fibre ChannelE. It is stateless: Clients can re-acquire a delegation without re-opening a file
205. Which of the following is true about a data protection (DP) mirror destination volume? (Choose 3)A. Can be in the same vserver as the sourceB. Can be in a different vserver as the sourceC. Can be on a different cluster from the sourceD. Can be on a Data ONTAP 7-mode systemE. Can be smaller than the source: can be in the same vserver as the source, can be in a different vserver as the source, can be on adifferent cluster from the source
206. Which of the following is true about the storage module?A. Handles NAS and SAN ProtocolsB. Serves data to clientsC. Manages WAFL, RAID and StorageD. Manages V-servers: Manages WAFL, RAID and Storage
207. Which of the following logical interfaces have failover and migration capabilities between nodes? (Choose 2)A. Data (FC, iSCSI)B. Cluster managementC. Data (CIFS, NFS)D. Node managementE. Cluster interconnect: Cluster management & Data (CIFS, NFS)
208. Which of the following logical interfaces have failover and migration capabilities?A. clientB. cluster managementC. dataD. node managementE. controller: cluster management, data
209. Which of the following privilege levels are found in clustered data ONTAP? (choose 3)A. adminB. advancedC. diagnosticD. systemE. cluster: admin, advanced, diagnostic
210. Which of the following protocols can be used to obtain the clustered ONTAP 8.2 software image? A. NFSB. FTPC. TFTPD. HTTPSE. HTTPF. CIFS: FTP, TFTP, HTTP
211. Which of the following shells are part of a Data ONTAP cluster? (Choose 3)A. ManagementB. AdminC. SystemD. NodeE. ClusterF. Advanced: System, Node, Cluster
212. Which of the following statements are true about data protection mirrors? (Choose 2)A. A data protection source volume supports up to 4 destination mirrored volumesB. A data protection source volume supports up to 1 destination volume per nodeC. A volume must be created before it can be used as a mirror destinationD. Creating a mirror relationship also creates the destination volume: A data protection source volume supports up to 4destination mirrored volumes, A volume must be created before it can be used as a mirror destination
213. Which of the following statements are true about SAN LIFs? (Choose 2)A. SAN LIFs are either up or downB. NAS and SAN protocols can share the same LIFC. SAN LIFS can migrate or failoverD. SAN LIFs can be associated with more than one data vserverE. NAS and SAN LIFs can share the same data port: SAN LIFs are either up or down and NAS and SAN LIFs can share the samedata port
214. Which of the following statements are true in a SnapMirror Load-Sharing (LS) mirror relationship? (Choose 2)A. Client requests to write data are allowed if the user is adminB. Client requests to write data are denied unless accessing the .admin shareC. Client requests to read data are only allowed if the mirror is up-to-dateD. Client requests to read data are redirected to the LS mirror destination volumes: Client requests to write data are deniedunless accessing the .admin share, Client requests to read data are redirected to the LS mirror destination volumes
215. Which of the following statements is true about a Flash Pool?A. A 32 bit or 64 bit aggregate containing SSDs and HDDsB. A 32 bit aggregate containing SSDs and HDDsC. A 64 bit aggregate containing SSDs and HDDsD. A 64 bit aggregate containing only SSDs: A 64 bit aggregate containing SSDs and HDDs
216. Which of the following statements is true about epsilon?A. There is a specific epsilon for each replicated database unitB. If the node with epsilon is rebooted, epsilon will automatically move to another available nodeC. Epsilon can be moved manuallyD. Epsilon cannot be moved manually: Epsilon can be moved manually
217. Which of the following statements is true about export policies?A. Each data vserver can only have one assigned export policyB. Each data volume can only have one assigned export policyC. Each data volume can only have one assigned export ruleD. Access to a volume is determined by the export policies created within an export rule: Each data volume can only have oneassigned export policy
218. Which of the following statements is true about giveback with storage failover?A. The surviving partner returns ownership of all the aggregates all at the same time to its partner nodeB. The surviving partner returns ownership of the all the aggregates and the data LIFS to its partnerC. The surviving partner returns ownership of the root aggregate first followed by the other aggregates to its partnernodeD. I/O only resumes when all aggregates are returned to the partner node: The surviving partner returns ownership of the rootaggregate first followed by the other aggregates to its partner node
219. Which of the following statements is true about the cluster session manager? (choose 3)A. Handles networking, NFS, and CIFSB. Provides a communication mechanism between any network module or SCSI module and any data moduleC. Provides a reliable transport for SpinNP trafficD. Is used regardless of whether the network module or SCSI module and data module are on the same node or differentnodes: Provides a communication mechanism between any network module or SCSI module and any data module, Provides a reliabletransport for SpinNP traffic, and Is used regardless of whether the network module or SCSI module and data module are on the same node ordifferent nodes
220. Which of the following steps must be completed before a CIFS share can be active?A. Configure name mappingB. License both NFS and CIFSC. Create a data LIF for the CIFS server on every nodeD. Reboot the node containing the CIFS Vserver root volume: configure name mapping
221. Which of the following types of LIFs can be assigned a user-defined failover group? (Choose 3)A. Cluster LIFB. Node-management LIFC. Cluster management LIFD. NAS Data LIF (NFS,CIFS)E. SAN Data LIF (iSCSI, FC): Node-management LIF, Cluster management LIF, NAS Data LIF (NFS, CIFS)
222. Which of the following Vserver types are created automatically by the cluster setup process?A. ManagementB. AdminC. ClusterD. NodeE. DataF. Diagnostic: Admin, Node
223. Which of these correctly describes single-node clusters?A. They support storage failoverB. They support nondistruptive upgradeC. They have no cluster LIFsD. They are identical to one-node clusters: They have no cluster LIFs
224. Which parameter must the cluster administrator properly define when configuring an iSCSI logical interface in DataONTAP 8.1 Cluster-Mode and later?A. data-accessB. data-addressC. data-protocolD. data-routingE. No parameter needs to be defined as no additional parameter is required.: data-routing
225. Which privilege levels are found in clustered ONTAP? (choose 3)A. single_userB. adminC. manageD. advancedE. diagnosticF. backup: admin, advanced, diagnostic
226. Which process is used for client access for NFS and CIFS in Cluster-Mode?A. accessdB. accdC. securitydD. secdE. mgwdF. sysdG. cached: secd
227. Which protocol(s) does Infinite Volumes support?A. All supported protocols on Data ONTAPB. NFSv3 and NFSv4 onlyC. NFSv2 and NFSv3 onlyD. File access and protocol improvementsE. NFSv3 and SMB 1.0 only: file access and protocol improvements
228. Which protocols are allowed by default data firewall policy?A. DNSB. HTTPSC. NDMPD. NTPE. SNMP, SSH, Telnet: DNS, NDMP
229. Which protocols are supported with clustered ONTAP 8.2 Vservers with Infinite Volumes?A. NFSv3 onlyB. NFSv3, NFSv4 and NFSv4.1C. CIFS, NFSv4 and NFSv4.1D. SMB 1.x, NFSv3, NFSv4.1 and pNFS: SMB 1.x, NFSv3, NFSv4.1 and pNFS
230. Which protocols does clustered Data ONTAP HA support with Infinite Volumes?A. NFSv3, NFSv4.1, and SMB1.0B. NFSv2 and SMB1.0 onlyC. NFS v1, NFSv2, and NFSv3 onlyD. NFSv2, NFSv3, and NFSv4.0 onlyE. NFSv3 onlyF. All supported NAS and SAN protocols on Data ONTAP: NFSv3, NFSv4.1, and SMB1.0
231. Which resource is associated with all logical interfaces?A. clusterB. cluster-routesC. group-routesD. portE. VServer-routes: port
232. Which SAN LIF fails over?A. iSCSI LIFs onlyB. FCoE LIFs onlyC. iSCSI LIFs and FCoE LIFs onlyD. FC LIFs onlyE. None of the above: None of the above
233. Which SAN LIF type allows failover?A. iSCSI LIFs onlyB. FCoE LIFs onlyC. FC LIFs onlyD. iSCSI LIFs and FCoE LIFs onlyE. FC LIFs and FCoE LIFs onlyF. None of the above: None of the above
234. Which security style is supported with Infinite Volumes?A. BlockB. NTFSC. Unix security styleD. Mixed: Unix security style
235. Which snapmirror identifies backup vault relationship?A. SVB. DPC. BVD. LSE. XDP: XDP
236. Which SnapMirror type identifies backup vault relationships?A. SVB. DPC. BVD. LSE. XDP: DP, XDP
237. Which statement is true about a Data Protection (DP) - type SnapMirror destination volume?A. It can be in a Data ONTAP GX ClusterB. It must be on the same disk type as the source volumeC. It can be smaller than the source volumeD. It can be on a different disk type than the source volume: It can be on a different disk type than the source volume
238. Which statement is true about a Flash Pool?A. A 32-bit or 64-bit aggregate containing SSDs and HDDsB. A 32-bit aggregate containing SSDs and HDDsC. A 64-bit aggregate containing SSDs and HDDsD. A 64-bit aggregate containing only SSDs: A 64-bit aggregate containing SSDs and HDDs
239. Which statement is true about a SnapMirror destination vserver?A. It must have a read-only Vserver root volume.B. It must be in the same cluster as the source VserverC. It must be created with the same language type as the source Vserver.D. It must have a different storage efficiency policy than the source Vserver.: It must be created with the same language type asthe source Vserver.
240. Which statement is true about CFO and SFO in clustered ONTAP?A. CFO aggregates are given back first, then SFO aggregates are given back one at a time.B. SFO aggregates are given back first, then CFO aggregates are given back one at a time.C. All aggregates are given at the same time.D. None, clustered ONTAP supports SFO aggregates only.: CFO aggregates are given back first, then SFO aggregates are givenback one at a time.
241. Which statement is true about clustered Data ONTAP 8.2 node based licensing?A. When replacing a controller for a RMA the key is automatically updated to the serial number of new controller.B. When replacing a controller for a RMA, a new key is needed but the existing key will work for 90 days.C. A new clustered Data ONTAP 8.2 installation can use both 8.1 keys and 7-Mode keys.D. Replacing a NVRAM card in a controller will NOT require new license keys for that mode.: When replacing a controller fora RMA, a new key is needed but the existing key will work for 90 days.
242. Which statement is true about converting an aggregate from 32-bit to 64-bit?A. It is supported when adding disks.B. It is supported without adding disks.C. It is supported in maintenance mode.D. It now supported. You must use VSM to migrate 32-bit to 64-bit.: It is supported when adding disks
243. Which statement is true about establishing a SnapMirror relationship in clustered data ONTAP?A. It sets up the relationship, but does not start the initial transferB. It sets up the relationship on the source node onlyC. It sets up the relationship and starts the initial data transferD. It sets up the relationship and creates the destination volume: It sets up the relationship, but does not start the initial transfer
244. Which statement is true about establishing a SnapMirror relationship?A. It sets up the relationship on the source node only.B. It sets up the relationship and starts the initial data transfer.C. It sets up the relationship and creates the destination volume.D. It sets up the relationship, but does not start the initial transfer.: It sets up the relationship, but does not start the initialtransfer.
245. Which statement is true about expanding an aggregate from 32-bit to 64-bit in place?A. All aggregates are automatically converted from 32-bit to 64-bit with the Data ONTAP 8.1 upgrade.B. The expansion is triggered by an aggr convert command.C. The expansion is triggered by adding disks to exceed 16 TB.D. The 32-bit aggregates are degraded and must be Volume SnapMirrored to a new 64-bit aggregates with Data ONTAP8.1 upgrade.: The expansion is triggered by adding disks to exceed 16 TB
246. Which statement is true about NFS export in Cluster-Mode?A. Export policies are created and modified by editing /etc/exports.B. Exports can be either persistent or temporary.C. Export policies and rules are stored in the RDB.D. Both A and BE. Both B and C: Export policies and rules are stored in the RDB
247. Which statement is true about NFS exports in Data ONTAP Cluster-Mode?A. Export policies are created and modified by editing /etc/exports.B. Export can be either persistent or temporary.C. Export policies and rules are stored in the RDB.D. Both A and BE. Both B and C: export policies and rules are stored in the RDB
248. Which statement is true regarding a single node cluster with Data ONTAP 8.2 or later?A. A single node cluster is supported and can grow beyond one node.B. A single node cluster is NOT supportedC. A single node cluster is supported but cannot grow beyond one nodeD. A single node cluster is supported with 10GbE cross connects between an onboard NIC and PCIe expansion NIC.: Asingle node cluster is supported but cannot grow beyond one node
249. Which statement is true when a two node switchless cluster is grown to a four-node cluster?A. The new HA-pair connected to two new cluster switches and the existing two-node cluster will connect one path at atime to the new cluster switches.B. There is a short outage while the new HA pair and existing two node cluster add additional NVRAM cards for clusterconnections.C. The new HA pair is direct-attached to the existing two-node cluster-free 10 GbE ports without adding switches.D. The new HA pair is connected to four new cluster switches and the existing two-node cluster will connect one path at atime to the new cluster switches.: The new HA-pair connected to two new cluster switches and the existing two-node cluster willconnect one path at a time to the new cluster switches.
250. Which statements are true of licensing in clustered ONTAP 8.2? (Choose 3)A. The base license is still required and is based on the node countB. Licenses are node-lockedC. Length of license is 14 charactersD. Length of license is 28 charactersE. HA functionality doesn't require a licenseF. HA functionality requires a license: licenses are node-locked, length of license is 28 characters, HA functionality doesn't require alicense
251. Which statements are true regarding backup vaults in clustered ONTAP 8.2? (Choose 2)A. Data can only be restored to a qtree.B. Backup vaults are at either a volume or qtree level.C. Data can be restored to either the source volume or a new volume on the same or different clustersD. Backup vaults are at the volume level only.E. Compatible with 7-mode SnapVault.: Data can be restored to either the source volume or a new volume on the same or differentclusters, and backup vaults are at the volume level only
252. Which steps need to be completed when creating a CIFS share? (Choose 3)A. Configure a share policyB. Configure an export policyC. Configure name mappingD. Configure a snapshot policyE. Create a junction path within the Vserver namespace: Configure an export policy, Configure name mapping, Create a junctionpath within the Vserver namespace
253. Which storage efficiency features are available in clustered Data ONTAP 8.2? (Choose 4)A. Thin provisioningB. FlexCloneC. DeduplicationD. SnapVaultE. CompressionF. SyncMirror: thin provisioning, flexclone, deduplication, compression
254. Which storage system combination is supported in a 4-node cluster?A. A pair of FAS3270s and a pair of FAS3020sB. A pair of FAS3270s with a FAS3240 and a FAS6240C. A pair of FAS6280s and a pair of E7900sD. A pair of FAS6280s and a pair of FAS3240s: a pair of FAS6280s and a pair of FAS3240s
255. Which term is used to highlight that a storage administrator can add more than 2 storage systems to a cluster?A. Scale upB. Scale horizontalC. Scale verticalD. Scale out: scale out
256. Which three are components of the NetApp Virtual Storage Tier (VST)?A. Flash AccelB. Flash CacheC. Flash DiskD. Flash IOE. Flash Pool: Flash Accel, Flash Cache, Flash Pool
257. Which three disk-type configurations are supported for Flash Pool?A. FC and SASB. FC and SSDC. SATA and SASD. SATA and SSDE. SSD and SAS: FC and SSD, SATA and SSD, SSD and SAS
258. Which three network switches are supported in Data ONTAP 8.1.1 Cluster Mode?A. Nexus 5010B. Nexus 5020C. CN1601D. CN1610: Nexus 5010, Nexus 5020, CN1610
259. Which three NFS versions does Data ONTAP 8.1 Cluster-Mode support?A. NFSv.0B. NFSv.1C. NFSv.1.1D. NFSv3.0E. NFSv4.1F. NFSv5.0: NFSv3.0, NFSv4.1, NFSv5.0
260. Which three of these features were introduced in clustered Data ONTAP 8.2A. SnapVault software for clustersB. three-node clustersC. eight-node scalable SAN clustersD. Switchless-two-node clusters: SnapVault software for clusters, eight-node scalable SAN clusters, Switchless-two-node clusters
261. Which three SMB versions do Data ONTAP Cluster Mode 8.1 and later support?A. SMB 4.0B. SMB 3.0C. SMB 2.1D. SMB 2.0E. SMB 1.0: SMB 2.1, SMB 2.o, SMB 1.0
262. Which three statements are true about a node's vol0 volume?A. It is not part of the namespace.B. One exists on every node in the cluster.C. It is the most efficient place to store critical user data.D. It should have LS mirrors on every node in the cluster.E. It cannot be moved with the volume move command: it is not part of the namespace, One exists on every node in the cluster, itcannot be moved with the volume move command
263. Which three storage features can be scaled by storage administrators?A. capacity scaling, by allowing more than two storage systems to be combined with larger disk shelvesB. energy scaling, by allowing the cluster to share the same power sourceC. heterogeneous scaling, by allowing E-Series and FAS-Series systems within a single clusterD. network scaling, by providing three or more network switches for the cluster networkE. operational scaling, by allowing the entire cluster to be administrated through a single resilient interfaceF. performance scaling, by using Flash Cache, SSDs, and Quality of Service: capacity scaling, by allowing more than two storagesystems to be combined with larger disk shelves, operational scaling, by allowing the entire cluster to be administrated through a singleresilient interface, performance scaling, by using Flash Cache, SSDs, and Quality of Service
264. Which two actions protect an Infinite volume from the loss of a namespace constituent? (Choose 2)A. Minor the namespace constituent by using an intracluster data protection mirrorB. Mirror the namespace constituent by using an Intercluster data protection mirrorC. Mirror the namespace constituent by using a load-sharing mirrorD. Mirror the namespace constituent by using a FlexCache mirror: Mirror the namespace constituent by using an Interclusterdata protection mirror, Mirror the namespace constituent by using a load-sharing mirror
265. Which two clustered Data ONTAP clone technologies will lock volume snapshot?A. Vol CloneB. LUN CloneC. AggrCloneD. FlexCloneE. SnapClone: LUN clone, FlexClone
266. Which two clustered interconnect switches are supported in clustered Data ONTAP 8.2?A. Nexus 5596B. MDS9124C. CN5010D. CN1610: Nexus 5596, CN1610
267. Which two configurations are supported in clustered Data ONTAP 8.2 and later?A. An 8-node cluster serving FCoE, ISCSI, CIFS, and NFSB. A single-node cluster serving FC, FCoE, ISCSI and SMB 3.0C. A 4-node cluster serving iSCSI from an Infinite VolumeD. A 16-node cluster serving FC and FCoE: An 8-node cluster serving FCoE, ISCSI, CIFS, and NFS, A single-node cluster serving FC,FCoE, ISCSI and SMB 3.0
268. Which two Data ONTAP Cluster-Mode clone technologies will lock a Snapshot copy? (Choose 2)A. FlexCloneB. LUN CloneC. Snap CloneD. Vol CloneE. Aggr Clone: FlexClone, LUN Clone
269. Which two devices support the NetApp Remote Support Agent (RSA)?A. SPB. RTCC. RLMD. ILOE. BMC: SP, RLM
270. Which two features are supported in clustered Data ONTAP 8.2?A. External USB supportB. MetroClusterC. Infinite volumeD. Flash cacheE. Infiniband data interfaceF. SnapLock: Infinite Volume, Flash cache
271. Which two LIFs are able to failover or migrate to other nodes in the cluster?A. cluster LIFB. data LIF of protocol CIFSC. data LIF of protocol FCoED. data LIF of protocol iSCSIE. data LIF of protocol NFSF. intercluster LIFG. node management LIF: data LIF of protocol CIFS, data LIF of protocol NFS
272. Which two methods can be used to upgrade clustered Data ONTAP 8.2 or later?A. USB upgradesB. Split upgradesC. Skip generation upgradesD. Rolling upgradesE. Batch upgrades: Rolling upgrades, Batch upgrades
273. Which two methods expose volumes to NAS clients? (Choose 2)A. Mount directories of a volume in a namespaceB. Mount the required namespaces in a volumeC. Mount the required namespaces in an aggregateD. Mount the required volumes in a namespace: Mount directories of a volume in a namespace, mount the required volumes in anamespace
274. Which two Netapp tools perform pre-checks to determine whether a NAS environment meets the requirements fortransition from 7-mode to clustered Data ONTAP?A. 7-mode Transition ToolB. Clustered ONTAP transition ToolC. Migration ChecklistD. Transition AdvisorE. Transition Deck: 7-mode transition tool, transition advisor
275. Which two now feature are available in Data ONTAP 8.1.1 C-Mode?A. Flash poolB. SSD SupportC. Infinite volumeD. Infiniband: flash pool, infinite volume
276. Which two SMB versions does Data ONTAP Cluster-Mode support?A. SMB 1.0B. SMB 2.0C. SMB 3.0D. SMB 4.0: SMB 1.0, SMB 2.0
277. Which two statements are true in a SnapMirror LS mirror relationship?A. Client requests to write data are allowed if the user is rootB. Client requests to write data are denied unless accessing the admin share.C. Client requests to read data are only allowed if the mirror is up-to-date.D. Client requests to read data are redirected to the LS mirror destination volumes.: Client requests to write data are deniedunless accessing the admin share., Client requests to read data are redirected to the LS mirror destination volumes.
278. Which two statements are true with clustered Data ONTAP support of IPv6?A. You can define multicast addressB. You can define a link-local addressC. You can define a look-back addressD. You must use a network mask of 64E. You can define an address with 64-bit hexadecimal ID in prefix: id format: You must use a network mask of 64, You candefine an address with 64-bit hexadecimal ID in prefix: id format
279. Which two statements are true with clustered Data ONTAP support of IPv6? (Choose 2)A. IPv4 and IPv6 configurations are supported on the cluster management LIFB. IPv4 and IPv6 configurations are supported on the same data LIFC. IPv6 allows a data LIF to span more than one VserverD. IPv4 and IPv6 configurations are supported on the cluster interconnect: IPv4 and IPv6 configurations are supported on thecluster management LIF, IPv4 and IPv6 configurations are supported on the same data LIF
280. Which two switches are supported cluster switches?A. Brocade 8000B. Brocade FLS624C. Cisco Nexus 5010D. Cisco Nexus 5020E. Cisco Catalyst 2960: Cisco Nexus 5010, Cisco Nexus 5020
281. Which two Vservers are created automatically by the cluster setup process?A. AdminB. DataC. ManagementD. NodeE. Protocol: admin, node
282. Which type of LIF allows replication between two clusters?A. clusterB. cluster-mgmtC. dataD. interclusterE. node-mgmt: intercluster
283. Which types of LIFs can be assigned a user-defined failover group? (Choose 3)A. Cluster LIFB. Node-management LIFC. Cluster-management LIFD. NAS data LIF (NFS,CIFS)E. SAN data LIF (iSCSI, FC): Node-management LIF, Cluster Management LIF, NAS data LIF (NFS, CIFS)
284. Which user space utility is used to manage NFS and CIFS access?A. secdB. spmdC. RDBD. Notifyd: secd
285. Which user space utility is used to manage other applications in the user space?A. secdB. RDBC. NotifydD. spmd: spmd
286. Which version of Data ONTAP first supports Flash Pool?A. Data ONTAP 8.1.1 Cluster-ModeB. Data ONTAP 7.3C. Data ONTAP 8.1 7-ModeD. Data ONTAP 8.1 Cluster-Mode: Data ONTAP 8.1.1 Cluster-Mode
287. Which versions of NFS are supported with clustered ONTAP 8.2 Vservers with FlexVol volumes?A. NFSv3 onlyB. NFSv2, NFSv3 and NFSv4C. NFSv3, NFSv4 and NFSv4.1D. NFSv2, NFSv3, NFSv4, NFSv4.1 and pNFSE. NFSv3, NFSv4, NFSv4.1 and pNFS: NFSv3, NFSv4, NFSv4.1 and pNFS
288. Which Vserver types are created automatically by the cluster setup process? (Choose 2)A. ManagementB. AdminC. ProtocolD. NodeE. Data: Admin, Node
289. With clustered data ONTAP 8.2 and later, which statement is true about deduplication and Flex Vol sizes?A. Deduplication is supported up to half the maximum volume size for the platformB. Deduplication is limited to 16 TBC. Deduplication is limited to 32 TBD. Deduplication is supported up to the maximum volume size for the platform.: deduplication is supported up to themaximum volume size for the platform
290. With clustered Data ONTAP 8.2 or later, an administrator may use NDMP commands at which two levels?A. NodeB. ClusterC. InterclusterD. Vserver: Node, vserver
291. With clustered Data ONTAP 8.2 or later, and administrator may use NDMP command at which two levels?A. NodeB. ClusterC. InterclusterD. VServer: Node, vserver
292. With clustered Data ONTAP 8.2 or later, which are valid values for Fractional reserve?A. You cannot change the fractional reserve setting In clustered Data ONTAP 8.2 and laterB. 0, 25, 50, 75, or 100C. 0, 50, or 100D. 0 or 100E. 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, or 100: 0 or 100
293. With clustered Data ONTAP 8.2 or later, which SAN component will no longer be supported?A. Windows Server 2012B. vSphere 5.1C. Veritas DMPD. Red Hat Enterprise Linux 6.2E. AIX 7.1: Veritas DMP
294. With clustered Data ONTAP 8.2, what two non-disruptive upgrade techniques are supported on cluster of 8 nodes ormore?A. batchB. parallelC. rollingD. synchronous: batch, rolling
295. With Data ONTAP 8.1, which statement is true about deduplication and volume sizes?A. Deduplication is limited to 16TB.B. Deduplication is limited to 32TB.C. Deduplication is supported up to half the maximum volume size for the platform.D. Deduplication is supported up to the maximum volume size for the platform.: Deduplication is supported up to themaximum volume size for the platform.
296. With regards to maintaining cluster quorum, epsilon functions as a:A. Master nodeB. Duplicated management databaseC. Secondary nodeD. Tie-breaker: Tie-breaker
297. Within clustered Data ONTAP 8.2 or later, which two functionalities are supported with an external asynchronousFPolicy server?A. Audit loggingB. Compression and decompression servicesC. Encryption and decryption servicesD. File AccessE. Hierarchical storage management: audit logging, file access
298. Within clustered Data ONTAP 8.2 or later, which two types of FPolicy integrations are supported?A. Text-based FPolicyB. SAN-based FPolicyC. Native BlockingD. External FPolicy serve: SAN-based FPolicy, External FPolicy serve
299. Within the navigation pane, what are the three stacks in system Manager's tree menu?A. NetworkB. ClusterC. NodeD. SystemE. vServer: cluster, node, vserver
300. You create a Vserver for iSCSI LUNS. When you issue the Vserver iscsi show command it reports: "This table iscurrently empty". What do you need to do to see the IQN for the vserver?A. Create an iSCSI LIF for the vserverB. Create a LUN in a vserver volumeC. Enable the iSCSI protocol on the vserverD. Generate an iqn for the Vserver with the make nodename commandE. License iSCSI on the vserver: Enable the iSCSI protocol on the vserver