NCCER IRC Guide

Once you receive your Annotated Instructor’s Guide (AIG) you will use the code on the yellow page at the front of the AIG to gain access to

the TestGen and tests for NCCER Core.

Step 1: Go to http://www.nccer.org/instructor-resource-center and click the IRC link

Step 2: Click on Construction and Maintenance: (Read the First time user statement under the grey boxes!)

READ

THIS

Step3: Click on the edition that you are currently using. This will most likely be the 4th or 5th edition of Core Curriculum and have a picture of

the text book.

5th Edition

4th Edition

Step 4: Register your Access Code (on the yellow page at the front of the AIG) to establish your log in and username. **If you have done this

already skip to step

STEP 5: Accept the Agreement by clicking accept

Step 6: If this is the first time using Pearson product you will not have an account. CLICK NO and enter the access code in the front of the AIG

and click next.

Click no create

username and

password

Enter your access code

If you have trouble with the access code contact:

Bill Underwood Executive Director - NCCER Programs Pearson Professional & Career 800.720.3870 ext. 3 william.underwood@pearson.com Pearson ~ Always Learning www.pearson.com

Step 7: Fill in your information and click next

Step 8: Click the Log in now button and it will take you to this page. [Write down your username and password for this site]. Click on the

Download TestGen Button. You will have to have the test gen loaded to access the tests. Tests can then be saved to your computer or USB. I

suggest saving them to a file or your desktop for ease of finding again.

Step 9: Click on downloads link

Step 10: Click on TestGen Desktop Application

Step 11: Click on the appropriate box for the computer you are downloading to. If you have trouble downloading the file, contact your local IT

professional. Access to administrative rights may be required.

Step 12: Once the download is complete click on TestGen questions for Mac or PC

Step 13: Open the files and copy and save them to your desktop or usb drive. Use the Core_4TG file.

Step: 14 Open the Core_4TG file and you will have access to the tests. The will open in the test generator. A “Locate Testbanks” icon will

appear. Click “No” The page should resemble this image for each individual test you open.

Step 15: To open your performance tests click on Performance Profile Sheet. This will open in PDF. (Adobe)

This should complete your process. If you have any questions please contact Andy Chamness at jchamness@alsde.edu or Chris Kennedy at

ckennedy@alsde.edu for assistance.