National Institute of Technology Jamshedpur August 2020R. Singh, S. Sharma, S.K. Vajpai, Effect of...
Transcript of National Institute of Technology Jamshedpur August 2020R. Singh, S. Sharma, S.K. Vajpai, Effect of...
SHODH-PravÃhResearch e-Bulletin
National Institute of Technology Jamshedpur
Volume -1, Issue-1
August 2020
Director’s Message
Dear Colleagues,
I am pleased to learn that NIT Jamshedpur is releasing the first edition of its Research
Bulletin, which will communicate about the research and development activities and
achievements of the institute, its faculty members, research scholars, and students to
institute community as well as other stakeholders. I hope that it will also provide an
impetus for creating a vibrant research and academic environment in the institute to
motivate for high quality research and developing state-of-the-art research
infrastructure. I would like to congratulate all the faculty, staff, and students for
their efforts and dedication, which led to achieve the all India ranking of 79 in NIRF-
2020 ranking framework. It would not have been possible without the collective
efforts of all the stakeholders. I congratulate the Office of Dean, Research and
Consultancy, for this initiative of publishing Research Bulletin, and hope that it will
prove to be a vibrant medium of exchange of scientific and academic ideas. My best
wishes for the success of this initiative.
Prof. Karunesh Kumar Shukla
Research and Consultancy Committee
ChairmanDr. Ram Vinoy Sharma,
Dean, research and Consultancy Professor, Dept. of Mechanical Engineering
ConvenerDr. Sanjay Kumar Vajpai,
Associate Dean (R&C)Asstt. Prof., Dept. of Metallurgical and Materials Engg.
Members
Dr. Subhadeep MetyaDept. of Civil Engg.
Dr. Vishesh Ranjan KarDept. of Mechanical
Engg.
Dr. Om Hari GuptaDept. of Electrical
Engg.
Dr. Ajay KumarDept. of Electronics &
Communication Engg.
Dr. Subrata DuttaDept. of Computer
Science & Engg.
Dr. Sanjay Kumar VajpaiDept. of Metallurgical and Materials Engg.
Dr. Subhash SinghDept. of Production & Industrial Engg.
Dr. Tapas DasDept. of Chemistry
Dr. Raj NandkeolyarDept. of Mathematics
Dr. Neha AgnihotriDept. of Physics
Dr. Alekha Kumar MishraDept. of Computer
Applications
Ongoing/Completed Sponsored Research Projects
S. No.
TITLE OF PROJECTFUNDING AGENCY
AMOUNT (in Lacs,
INR)
NAME(s) and AFFILIATION of
PI & Co-PI(s)
1
Spatial Distribution of Uranium and Associated Water Quality Parameters in
groundwater/drinking water of seven districts (East Singhbhum, Saraikela Kharsawan, West
Singhbhum, Khunti, Simdega, Gumla, Latehar) of Jharkhand
DAE & BRNS
27.518
Dr. Balram Ambade, Dept.
of Chemistry Dr. C.M. RaoDept. of Civil
Engg.
2
Polycyclic Aromatic Hydrocarbons (PAHs) in the Atmosphere of Jamshedpur, East India: sources,
human health risk Assessment and climate effects
SERB 28.99
Dr. Balram Ambade,Dept. of
Chemistry
3
Black carbon Aerosols over Jamshedpur: Source, Radiative Forcing and Climate Impact
SERB 36.8
Dr. Balram Ambade,Dept. of
Chemistry
4
Mathematical Modeling and FiniteElement Analysis of Wind Turbine Blades
(WTB): Coupled 1D ApproachDST , SERB
6.6
Dr. K.K. ShuklaDept. of Civil
Engg.
5
Design and Development of a Centralized Database on Scholarship/ fellowships awarded
in S & T sectorDST 29.205
Dr. KoushlendraKumar Singh
Dept. of Comp. Sci. & Engg.
6Identification of factors for successful
implementation of Amul like Cooperatives for forest produce
IMPRESS 4.5Dr. Akanksha
ShuklaDept. of HSSM
7A Study on the Role of Social Capital in the Implementation and Effectiveness of NRLM
SchemeICSSR 7
Dr. Manish Kumar Jha
Dept. of HSSM
8Wavelet methods for nonlinear fractional
partial differential equations with Engineering applications
NBHM 13.5Dr. Sunil Kumar
Dept. of Mathematics
9Spectral methods for fractional models of
mathematical physics with new non-local and nonsingular Caputo-Fabrizio derivative
DST, SERB22.212
Dr. Sunil KumarDept. of
Mathematics
Ongoing/Completed Sponsored Research Projects
S.No.
TITLE OF PROJECTFUNDING AGENCY
AMOUNT (in
Lacs, INR)
NAME(s) and AFFILIATION of PI
& Co-PI(s)
10
Modelling & Simulation of Three-Dimensional Magnetohydrodynamic Nanofluid flows over a
Strentching Surface SERB-DST 17.47
Dr. Raj Nandkeolyar
Dept. of Mathematics
11
Theoretical investigation on non-focal transport of particles in sediments laden turbulent flows
using fractional diffusion equation SERB-DST 15.52
Dr. SnehashishKundu
Dept. of Mathematics
12
State Estimation and Fault Diagnosis for Differential-Algebraic Nonlinear Control Systems
DST 16
Dr. MahendraKumar Gupta
Dept. of Mathematics
13
Blast Analysis of Functionally Graded Materials Plate & Shell Panels
SERB-DST 17.3633
Dr. ShashnkPandeyDept. of
Mechanical Engg.
14
Hydraulic Design of Ash disposal system of thermal plant to minimize the heavy metal
contamination of ground waterSERB-DST 22.21
Dr. Satish KumarDept. of
Mechanical Engg.
15
Effect of Nano-particles in Viscoplastic Complex Fluids: A Thermorheological Characterization and
Heat Transfer InvestigationSERB-DST 28.05
Dr. M.A. Hassan,Dept. of
Mechanical Engg.
16
Effect of Perforation and Corrugation on the Nonlinear Flexural and Vibration Behaviour of
Heated Layered/Graded Composite Panels under Various Loading/Support Conditions
SERB, DST 11.52
Dr. Vishesh Ranjan Kar
Dept. of Mechanical Engg.
17
Comparative Analysis of TEG and WHR system Used for Energy Harvesting from Engines
SERB, DST 21.28
Dr. Dulari HansdahDept. of
Mechanical Engg.
Ongoing/Completed Sponsored Research Projects
S.No.TITLE OF PROJECT
FUNDING AGENCY
AMOUNT (in Lacs,
INR)
NAME(s) and AFFILIATION of
PI & Co-PI(s)
18
Nanoparticle Oxygen Carrier Assisted Chemical Looping Combustion
SERB, DST 39.914
PI: Prof. Sanjay, Co-PI: Dr. M A
HassanDept. of
Mechanical Engg.
19
Investigation of Instabilities and Vibrations in Cables and Belts Travelling over Pulleys
SERB, DST 48.004
PI : Prof P Wahi(IITK), Co-PI: Dr.
A K MandalDept. of
Mechanical Engg.
20
Design and Development of Compact Semi-Automatic Parboiling Machine with Dryer for
Marginal FarmingTDP, DST 12.5
PI: Dr. A K Mandal, Co-PI: Dr. M A Hassan
Dept. of Mechanical Engg.
21
Development of Functionally Graded HA based Bioactive Composite Coating by Plasma Spraying
and Electrophoretic deposition (EPD)
SERB,DST 22.085
Dr. Renu KumariDept. of MME
22Computational Modelling of Novel Materials for Efficient, Robust Organic Solar Photovoltaic Cells DST 35
Dr. Neha Agnihotri
Dept. of Physics
23
Transition Metal Carbide Nanomaterials for Energy Storage Application
Indo-US Science & Technology Forum,
India
31.522
PI- Dr. Subhash Singh
Dept. of Production and Industrial Engg.
24
MXene Based Conducting Electrodes for Dye-Sensitized Solar Cells Application
SERB, DST 19.84126
Dr. Subhash Singh
Dept. of Production and Industrial Engg.
Research Collaborations
MOU’s1. National Metallurgical Laboratory, Jamshedpur.
2. Advance Tech India Pvt. Ltd. Chandigarh.
3. Madan Mohan Malviya University of Technology, Gorakhpur.
4. National Coordinating Institute Unnat Bharat Abhiyan, I.I.T.Delhi.
5. Ritsumeikan University, Kyoto, Japan.
6. Central Glass & Ceramic Research Insitute, Kolkotta.
Research Outcomes
Patents Granted/Published/filed
❖ An apparatus to measure in situ shear strength of soil and method thereof, Patent office
journal no.13/2018 dated 30.03.2018, pp.11292: Prof. Anil Kumar Choudhary, Dept. of
Civil Engineering. Published
❖ Rain drop soil erosion stimulator, patent office journal no.15/2018, dated 13-4-2018,
pp.13427: Prof. Anil Kumar Choudhary, Dept. of Civil Engineering. Published
❖ An improved process for the reduction of chromite ore , (U/S 11A), dated 26-08-2016:
Dr. Ranjit Prasad and S. Ranganathan, Dept. of Metallurgical and Materials Engineering.
❖ A Framework For Reliability & Performance Analysis Of Safety-critical System Using
Stochastic Modeling, The Patent Office Journal 20/2020, Dated: 15/05/2020 : Dr. Vinay
Kumar, Dept. of Computer Science and Engineering. Published
❖ Method for designing dynamic framework for tuning svm hyper parameters based on
moth-flame optimization and knowledge-based-search, The Patent Office Journal
20/2020), dated 15/05/2020: Dr. Vinay Kumar, Dept. of Computer Science and
Engineering. Published
❖ “An IoT Based Intelligent Food Storage System”, Alekha Kumar Mishra, Co- Inventor,
Intellectual Properties India Application Number: 202041018273, Date of filing
29/04/2020, Status : Published.
❖ “A Symmetric Cryptosystem For Secure Data Communication Between Network Devices
Using Graph Based Operation”, Alekha Kumar Mishra, Inventor, Intellectual Properties
India Application Number: 202041032254, Date of filing 28/07/2020, Status : Published.
Publications and Citations
130
161
209 214
0
50
100
150
200
250
2016 2017 2018 2019
No
. of
Pu
blic
ati
on
s
Year of Publication
Research Publications, NITJSR
8231025
1499
1923
0
500
1000
1500
2000
2500
2016 2017 2018 2019
No
. of
Cit
ati
on
s
Year
Citations
Data Source: SCOPUS
Recent Publications
❖ H. Shekhar, Jitendra Kumar and A. Nayak, “A Fault Detection Technique During Power
Swing in a TCSC-Compensated Line Using Teager Kaiser Energy Operator,” IETE Journal
of Research-Springer, 2020, 1-21.
❖ Jitendra Kumar and P. Jena, “Wide-Area Measurement-Based Adaptive Backup
Protection for Shunt Compensation Environment,” Arabian Journal for Science and
Engineering-Springer, 2020, 1-13. DOI 10.1007/s13369-020-04762-6
❖ M.S. Kumar, Jitendra Kumar and R. N. Mahanty, “Fault Detection During Power Swing in
a TCSC-Compensated Transmission Line Based on Clark’s Transform and Teager–Kaiser
Energy Operator”. Iranian Journal of Science and Technology, Transactions of Electrical
Engineering-Springer DOI 10.1007/s40998-020-00344-2.
❖ Ashish Agrawal, Sanjay Kumar Vajpai, “Preparation of Cu–Al–Ni shape memory alloy
strips by spray deposition-hot rolling route”, Materials Science and Technology, 36
(2020), 1337-1348.
❖ R. Singh, S. Sharma, S.K. Vajpai, Effect of Reversible Cyclic Plastic Deformation and
Thermal Treatment on the Microstructure and Mechanical Properties of SS304L Steel.
Trans Indian Inst Met, 73 (2020) 1227–1237.
❖ Bhupendra Sharma, Sanjay Kumar Vajpai, Mie Kawabata, Takayoshi Nakano, Kei
Ameyama, Microstructure and Mechanical Behavior of Ti–25Nb–25Zr Alloy Prepared
from Pre-Alloyed and Hydride-Mixed Elemental Powders, MATERIALS TRANSACTIONS,
61 (2020) 562-566.
❖ Madhusudana Rao C., Bardhan A. and Patra J.P. (2020), “Assessment of hydrological
response in Subarnarekha river basin under anticipated climate change scenarios”,
Global NEST Journal, 22(2), 207-219. https://doi.org/10.30955/gnj.003191, SCI.
❖ Madhusudana Rao C., and Bardhan A. (2020), “Uncertainties and nonstationarity in
streamflow projections under climate change 2 scenarios and the ensuing adaptation
strategies in Subarnarekha river basin, India”, Global NEST Journal, [In press].
https://doi.org/10.30955/gnj.003328, Indexed in SCI.
❖ Metya, S. and Bhattacharya, G. (2020), “Accounting for 2-D Spatial Variation in Slope
Reliability Analysis”, International Journal of Geomechanics, ASCE, Volume 20, Issue 3,
DOI: 10.1061/(ASCE)GM.1943-5622.0001609, Impact Factor – 2.332, Indexed in SCI.
❖ Sourav Das, A. Swaminathan, A harmonic mean inequality for the polygamma
function, Mathematical Inequalities and Applications, 23 (2020), no. 1, 71--76.
(SCI, Q1, IF: 1.510)
❖ Sourav Das, Inequalities involving q-analogue of multiple psi functions, Comptes Rendus
Mathematique, 358 (2020), no. 3, 327--332. (SCI, Q1, IF: 0.87)
❖ Sumit Kumar Debnath, Pantelimon Stanica, Nibedita. Kundu and Tanmay Choudhury:
Secure and Efficient Multiparty Private set Intersection Cardinality. Advances in
Mathematics of Communications (accepted), AIMS (SCIE), 2020. Impact factor- 0.734
❖ Nibedita Kundu, Sumit Kumar Debnath*, Dheerendra Mishra, Tanmay Choudhury: Post-
quantum digital signature scheme based on multivariate cubic problem. Journal of
Information Security and Applications, Elsevier (SCIE), 53, 1-8, 2020. IF- 2.327
❖ Nibedita Kundu, Sumit Kumar Debnath, Dheerendra Mishra*: 1-Out-of-2: Post-Quantum
Oblivious Transfer Protocols Based on Multivariate Public Key Cryptography, Sadhana
(accepted), Springer (SCIE), 2020. Impact factor- 0.849
❖ Sumit Kumar Debnath, Pantelimon Stanica, Tanmay Choudhury and Nibedita Kundu: Post-
quantum protocol for computing set intersection cardinality with linear complexity, IET
Information Security (accepted), 2020. IET (SCIE). IF- 0.949
❖ GS Seth, B Kumar, R Nandkeolyar, VK Sinha, Numerical Simulation of MHD Stagnation Point
Flow of Micropolar Heat Generating and Dissipative Nanofluid: SLM Approach, Proceedings
of the National Academy of Sciences, India Section A: Physical Sciences, 2020, (SCIE, Impact
Factor: 0.91)
❖ B Kumar, GS Seth, R Nandkeolyar, Quadratic multiple regression model and spectral
relaxation approach to analyse stagnation point nanofluid flow with second-order slip,
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process
Mechanical Engineering, 2020, 234 (1), 3-14 (SCIE, Impact Factor: 1.606).
❖ VK Sinha, B Kumar, GS Seth, R Nandkeolyar, Features of Jeffrey fluid flow with Hall current: A spectral simulation, Pramana: Journal of Physics, 2020, 94 (1), 64 (SCIE, Impact Factor:
1.688)
❖ A Kumar, R Tripathi, R Singh, VK Chaurasiya, Simultaneous effects of nonlinear thermal
radiation and Joule heating on the flow of Williamson nanofluid with entropy generation,
Physica A: Statistical Mechanics and its Applications, 2020, Vol. 551, page 551 (SCI, I.F.
2.924)
❖ A Kumar, R Tripathi, R Singh, M. A. Sheremet, Entropy generation on double diffusive MHD
Casson nanofluid flow with convective heat transfer and activation energy, Indian Journal of
Physics, 2020, (SCI, I.F. 1.407 )
❖ A. Kumar, R. Tripathi, R. Singh and G. S. Seth, Three-dimensional magnetohydrodynamic
flow of micropolar CNT-based nanofluid through a horizontal rotating channel: OHAM
analysis, Indian Journal of Physics, 2020, Vol. 94, pp. 319-332 (SCI, I.F. 1.407).
❖ B. Mondal, T. Mandal, A secure image encryption scheme based on genetic operationsand a new hybrid pseudo random number generator. Multimed Tools Appl 79, 17497–17520, (2020).
❖ I Maiti, T Mandal, S Pramanik, Journal of ambient intelligence and humanizedcomputing, 1-12, 2020. (SCI)
❖ R. Ranjan, H. S. Prasad: A novel approach for the numerical approximation to thesolution of singularly perturbed differential-difference equations with small shifts, J.Appl. Math. Comput., 2020, (SCIE), Impact factor: 1.242
❖ Rakesh Ranjan, Hari Shankar Prasad: A Fitted Finite Difference Scheme for solvingSingularly Perturbed Two Point Boundary Value Problems. Information Science Letters,An International Journal, 2020, 9(2), 65-73 (Scopus).
❖ R. Kumar, Sripati Jha and R. Singh, A Different Approach for Solving the Shortest PathProblem Under Mixed Fuzzy Environment, International Journal of fuzzy systemApplications, 2020, 9 (2), article 6, pp 132-161 (Scopus).
❖ S. Gayen, F. Smarandache, Sripati Jha, M. K. Singh, S. Broumi and R. Kumar, Introductionto Plithogenic Hypersoft Subgroup, Neutrosophic Set and Systems, 2020, 33, 208-233(Scopus & ESCI).
❖ Ranjan Kumar, S A Edalatpanah, Sripati. Jha, R. Singh, A Pythagorean fuzzy approach tothe transportation problem”. Complex & Intelligent Systems, 2019, 5(2), 255-263, (ESCI)
❖ Arindam Giri, Subrata Dutta, Sarmistha Neogy, “Fuzzy Logic-Based Range-FreeLocalization for Wireless Sensor Networks in Agriculture” Advanced Computing andSystems for Security, pp 3-12, 2020.
❖ KK Singh, MK Bajpai, RK Pandey, “A novel approach for enhancement of geometric andcontrast resolution properties of low contrast images”,IEEE/CAA Journal ofAutomaticaSinica.
❖ Mamdikar, Mohan Rao, Vinay Kumar, Pooja Singh, and Lalit Singh. "Reliability andperformance analysis of safety-critical system using transformation of UML into statespace models." Annals of Nuclear Energy 146 (2020): 107628.
❖ Mahapatra, Surya Naryan, Binod Kumar Singh, and Vinay Kumar. "A Survey on SecureTransmission in Internet of Things: Taxonomy, Recent Techniques, ResearchRequirements, and Challenges." ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING(2020).
❖ Kalita, DhrubaJyoti, Vibhav Prakash Singh, and Vinay Kumar. "SVM Hyper-ParametersOptimization using Multi-PSO for Intrusion Detection." In Social Networking andComputational Intelligence, pp. 227-241. Springer, Singapore, 2020.
❖ Kalita, DhrubaJyoti, Vibhav Prakash Singh, and Vinay Kumar. "A Survey on SVM Hyper-Parameters Optimization Techniques." In Social Networking and ComputationalIntelligence, pp. 243-256. Springer, Singapore, 2020.
❖ Kumar, Vinay, Aditi Biswas Purba, ShailjaKumari, and Sanjay Kumar. "A Survey onWireless Network." In Social Networking and Computational Intelligence, pp. 585-593.Springer, Singapore, 2020.
❖ Kumar, Vinay, SairajNemmaniwar, Harshit Saini, and Mohan Rao Mamidkar. "A State of the Art on Network Security." In Social Networking and Computational Intelligence, pp. 577-584. Springer, Singapore, 2020.
❖ Surya Naryan Mahapatra, Binod Kumar Singh, Vinay Kumar , A Survey on Secure Transmission in Internet of Things: Taxonomy, Recent Techniques, Research Requirements and Challenges, Arabian Journal for Science and Engineering (2020)
❖ Kumar, S., Singh, B.K. & Yadav, M. ,A Recent Survey on Multimedia and Database Watermarking. Multimed Tools Appl (2020).
❖ Arpita Sarkar and Binod Kumar Singh,A Review on Performance, Security and Analysis of Biometric Authentication System and Various Biometric Template Protection Schemes, Multimedia Tools and Applications,(SCIE)-Accepted.
❖ AK Srivastava, H Sneha, KK Singh, “Pose Invariant Face Recognition Using Principal Component Analysis”, Soft Computing: Theories and Applications, 1029-1043, Springer, 2020 (Book Chapter).
❖ KK Singh, A Mishra, A Deep, A Kumar, B Kumar , “Hand Vein Biometric Recognition Using Local Binary Pattern”, Computational Intelligence, Security and Internet of Things, 398-406, Springe (Book chapter).
❖ A. K. Behera, U. Laha and J. Bhoi, “Phase equivalent energy-dependent potentials-–a supersymmetric approach”, Malayasian J. Science 39, 63-71 (2020).
❖ U. Laha, “Nuclear Hulthén potential and the scattering phase shifts for l=3 ” Current Science 118, 582-586 (2020).
❖ U. Laha, “The Hankel transform of the Hulthén Green’s function”, Few-Body Ststems, 61:3 (2020).
❖ B. Khirali, A. K. Behera, J. Bhoi and U. Laha “Scattering with Manning-Rosen potential in all partial waves”, Ann. Phys. 412, 168004 (2020).
❖ A. K. Behera, U. Laha and J. Bhoi, “Generating Velocity-Dependent Potential in all partial waves”, Turkish J Physics, 44, 229-238 (2020).
❖ A. K. Behera, U. Laha, P. Sahoo and J. Bhoi, “Hulthén half-off-shell T matrix-Application ton-p and n-d systems”, J. Korean Phys. Soc. 76, 782-787 (2020).
❖ A. K. Behera, J. Bhoi, U. Laha and B. Khirali, “Study of nucleon-nucleon and alpha-nucleonelastic scattering by the Manning-Rosen Potential”, Communications in TheoreticalPhysics, 72, 075301 (2020).
❖ B. Khirali, A.K. Behera, J. Bhoi and U. Laha“, On- and off-shell Jost functions for theManning-Rosen potential”, Physica Scripta, 95, 075308 (2020).
❖ A. K. Behera, B. Khirali, U. Laha and J. Bhoi, “Construction of equivalent energy-dependentpotential by Taylor series expansion”, Theoretical & Math. Phys. (2020) (in Press).
❖ P. Sahoo, U. Laha and A. K. Behera“, p-12C and p-d Scattering within the Separable modelof Interaction”, Physics Atom. Nuclei 2020 (in Press).
❖ U. Laha, A. K. Behera , M Majumder and J. Bhoi, “The Fredholm determinant for Hulthéndistorted nonlocal separable potential –application to elastic scattering”, Pramana- J.Phys. 2020 (in Press)
❖ Subhash Singh, Kaushik Pal, Influence of texture evolution on mechanical and dampingproperties of SiC/Li2ZrO3/Al composite through friction stir processing, Journal ofEngineering Materials and Technology 142(2) (2020) 021011-(1-9) (SCI, IF1.144)
❖ Ravinder Kataria, Ravi Pratap Singh, Sandeep Singhal, Kartikey Verma, Subhash Singh,Rotary Ultrasonic Drilling of Quartz Ceramic: Experimental Investigation, MicrostructureAnalysis and Multi Response Optimization, Materials Today: Proceedings 21 (2020) 2043–2052 (Scopus).
❖ Tushar Banerjee, A K Chattopadhyay, Dry turning performance of TiN-WSx/TiN hard-lubricious bilayer composite coating, Machining Science and Technology, 2020. (SCI, IF:2.071)
❖ Sunny Kumar, Tushar Banerjee, Dharmendra Patel, Tribological characteristics of electrolessmultilayer coating: A review, Materials Today: Proceedings, 2020, (Scopus)
❖ M. Baruah, S. B. Prasad, N. Tudu, B. Murmu, and S. Singh, 2020, “ExperimentalInvestigation of Inconel Welded Joints Formed by Pulsed Micro Plasma Welding,” MaterialsToday Proceedings (Accepted on 7th July 2020).
❖ Mukesh Kumar, Ashish Das, Raj Ballav, Influence of tool geometry on morphology andmechanical properties of friction stir welded dissimilar joints: A review, Materials Today:Proceedings, 2020.
❖ Mukesh Kumar, Ashish Das, Raj Ballav, Influence of interlayer on microstructure andmechanical properties of friction stir welded dissimilar joints: A review, Materials Today:Proceedings,2020,26,2123-2129.
❖ Shambhu Kumar Manjhi, Ashish Das, Shashi Bhushan Prasad, Review on joining ofaluminum alloy by solid-state welding technique, Materials Today: Proceedings, 2020, 26,1255-1261.
❖ P. Pawar, Amaresh Kumar, Raj Ballav, Experimental Study On The Mrr , Machined DepthAnd Hole Diameter For Soda-Lime Glass By Electrochemical Discharge Machining ProcessWith Copper Tool, Int. J. Mod. Manuf. Technol. Xii (2020) 131–143.
❖ Niraj Kumar, Ashish Das, Shashi Bhushan Prasad, An analysis of friction stir welding (FSW) ofmetal matrix composites (MMCs),Materials Today: Proceedings, 2020, 26, 2650-2656.
❖ Ashish Das & Mukul Shukla, Bioactive multifunctional hopeite coatings on new generationSS254 steel by laser rapid manufacturing for bone implant applications, Transactions of theIMF: The International Journal of Surface Engineering and Coatings, 2020, 98, 209-216. (SCI,IF-1.052)
❖ Ashish Das & Mukul Shukla, New generation hopeite coating on Ti6Al4V (TC4) by radiofrequency magnetron sputtering for prosthetic-orthopaedic implant applications: synthesisand characterisation, Transactions of the IMF: The International Journal of SurfaceEngineering and Coatings, 2020, 98, 88-96. (SCI, IF-1.052)
❖ Ashish Das & Mukul Shukla, Surface Design Using Laser Rapid Manufacturing for Ti64-Hopeite Orthopedic Implants, Metals and Materials International, 2020. (SCI, IF-1.990)
❖ Ashish Das & Mukul Shukla, Multifunctional Hydroxyapatite and Hopeite Coatings on SS254by Laser Rapid Manufacturing for Improved Osseointegration and Antibacterial Character: AComparative Study, Journal of Engineering in Medicine, 2020, 234. (SCI, IF-1.282)
❖ Niraj Kumar & Ashish Das, Ecofriendly energy efficient welding of aluminium matrixcomposites for aerospace applications: A state of art review, Materials Today: Proceedings,2020,26, 1666-1675, (SCOPUS)
❖ Sanjeev Kumar Raghuwanshi, Manish Kumar, Sumit Kumar Jindal, Ajay Kumar, Om Prakash“High Se nsitivity Detection of Hazardous Chemical by Special Featured Grating AssistedSurface Plasmon Resonance Sensor based on Bimetallic Layer,” IEEE Transaction onInstrumentation and Measurement, Vol. 69, no. 7, pp. 5072-5080, print ISSN: 0018-9456,Online ISSN: 1557 - 9662 6 2020.
❖ Rajiv Kumar, Ajay Kumar, Poonam Singh, Niranjan Kumar, “All optical pseudo noisesequence generator using a micro-ring resonator,” Frontier of Optoelecrtonics (Springer),accepred (15 May, 2020).
❖ Sumit Kumar Jindal, Ritobrita De, Ajay Kumar, Sanjeev Kumar Raghuwanshi, “Novel MEMSPiezoresistive Sensors with Hair-Pin Structure to Enhance Tensile and CompressiveSensitivity and Correct Non-Linearity,” Journal of Electronic Testing : Theory andApplications (Sprnger), Vol. 36, No. 4,2020.
❖ N. Kumar, P. K. Singya and V. Bhatia ``ASER Analysis for Higher Order QAM Schemes in Two-Way Multiple Relay Networks under Imperfect CSI,” IET Commun., vol. 14, no. 10 , pp. 1511-1520, Jun 2020.
❖ P. K. Singya, N. Kumar, V. Bhatia and M. S. Alouini, “On the Performance Analysis of HigherOrder QAM Schemes over Mixed RF/FSO Systems,” IEEE Trans. Veh. Technol., vol. 69, no. 7,pp. 7366-7378, Jul. 2020.
❖ Ranjan, Prakash, Chetan Barde, Arvind Choubey, Santosh Kumar Mahto, and Rashmi Sinha.“Wide band polarization insensitive metamaterial absorber using lumped resistors”. SNAppl. Sci. 2, 1061 (2020). (SCI).
❖ B Bhowmik, "Comparative Study of Thin-Film-Based Planar and Vertical Devices TowardsIsopropyl Alcohol Sensing," Journal of Electronic Materials 48, No. 11(2019):7292-7301(SCI).
❖ Jagritee Talukdar, Gopal Rawat, Kunal Singh and Kavicharan Mummaneni “Comparativeanalysis of effect of trapcharges on single and double gate extended source Tunnel FET withdp+ SiGe pocket layer “Journal of Electronic Materials 49, pp 4333–4342 (2020) . (SCI).
❖ S Kumar; K Singh; K Baral; P.K Singh; S Jit “2-D Analytical Model for Electrical Characteristicsof Dual Metal Heterogeneous Gate Dielectric Double-Gate TFETs with Localized InterfaceCharges” Silicon (Accepted) (2020).
❖ Kapil Bharadawaj, Mayank Srivastava, “Floating Memristor and Inverse MemristorEmulation configurations with Electronic/Resistance controllability,’ IET Circuits Devices andSystems, (SCI), Accepted for publication, June 2020.
❖ Dilip Kumar Yadav and Sephali Behera, “A Survey on Secure Cloud-Based E-Health Systems,EAI Endorsed Transactions on Pervasive Health and Technology, 2020, ISSN: 2411-7145.
❖ Dindayal Mahto and Dilip Kumar Yadav, “Cloud-based Secure TeleMedicine InformationSystem using Crypto Biometric Techniques, EAI Endorsed Transactions on Pervasive Healthand Technology, 2020.
❖ Amit Prakash, Dilip Kumar Yadav, Arvind Choubey, “Terminal reliability analysis ofmultistage interconnection networks”, International Journal of System AssuranceEngineering and Management Vol. 11(1) , pp 110-125, 2020.
❖ Amit Prakash, Dilip Kumar Yadav, Arvind Choubey, “A Survey of Multistage InterconnectionNetworks”, Recent Advances in Electrical & Electronic Engineering Formerly Recent Patentson Electrical & Electronic Engineering, Vol. 13(2), pp 165-183, 2020.
❖ Jha, Saurabh, Ashok Kumar Mehta, and Chandrashekhar Azad. "A fuzzy logic basedapproach for prediction of basal cell carcinoma and squamous cell carcinoma among thedata of skin cancer." EAI Endorsed Trans. Pervasive Health Technol. 6.22 (2020).
❖ Chandrashekhar Azad, Ashok Kumar Mehta, Dindayal Mahto, and Dharmveer Kumar. "Support Vector Machine based eHealth Cloud System for Diabetes Classification." EAIEndorsed Trans. Pervasive Health Technol. 5.20 (2020).
❖ Alekha Kumar Mishra, Maitreyee Sinha, and Asis Kumar Tripathy, “A Sinkhole PreventionMechanism for RPL in IoT”, International Journal of Computational Science and Engineering,(Accepted and listed in Forthcoming Article), ISSN:1742-7193.
❖ Ghatage, P.S., Kar, V.R., Sudhagar, P.E. On the numerical modelling and analysis of multi-directional functionally graded composite structures: A review (2020) CompositeStructures, 236, art. no. 111837
❖ M, P., Prasad, A.K., Paswan, M.K.Durability improvement of axle housings by compressiveresidual stress inducement (2020) Applied Materials Today, 19, art. no. 100584.
❖ Khan, I.A., Prasad, N., Pal, A., Yadav, A.K. Efficient production of biodiesel from Cannabissativa oil using intensified transesterification (hydrodynamic cavitation) method (2020)Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 42 (20), pp. 2461-2470.
❖ Yadav, K.D., Prasad, R.K. Performance analysis of parallel flow flat plate solar air heaterhaving arc shaped wire roughened absorber plate (2020) Renewable Energy Focus, 32, pp.23-44.
❖ Mishra, S., Sharma, A., Kumari, A., Sanjay, Response surface methodology based
optimization of air-film blade cooled gas turbine cycle for thermal performance prediction
(2020) Applied Thermal Engineering, 164, art. no. 114425.
❖ Mittal, P., Paswan, M.K., Sadasivuni, K.K., Gupta, P. Structural, wear and thermal behaviour
of Cu–Al2O3–graphite hybrid metal matrix composites (2020) Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234 (8), pp.
1154-1164.
❖ Ghritlahre, H.K., Sahu, P.K., Chand, S. Thermal performance and heat transfer analysis of arc
shaped roughened solar air heater – An experimental study (2020) Solar Energy, 199, pp.
173-182.
❖ Kumar, B., Ranjan, V., Azam, M.S., Kumar, R. Acoustic Response of Thin Plate with Discrete
Patches with Variable Thickness in Water Medium (2020) Journal of Vibrational Engineering
and Technologies, 8 (1), pp. 27-34.
❖ Hassan, M.A., Pathak, M., Khan, M.K., Khan, N.H. Natural convection of viscoplastic fluids in
an enclosure with partially heated bottom wall (2020) International Journal of Thermal
Sciences, 158, art. no. 106527, .
❖ Singh, H., Kumar, S., Mohapatra, S.K. Modeling of solid-liquid flow inside conical diverging
sections using computational fluid dynamics approach (2020) International Journal of
Mechanical Sciences, 186, art. no. 105909, .
❖ Prabhakar, M., Prasad, A.K., Paswan, M.K. Influence of loading sequence and residual
stresses affecting the fatigue life of axle housing and crack path analysis using local
approaches (2020) Engineering Failure Analysis, 116, art. no. 104753, .
❖ Prabhakar, M., Prasad, A.K., Paswan, M.K. Design Life Correlation of Axle Housings with
Experimental Investigations and Failure Analysis to Overcome Manufacturing Process
Influences by Surface Finish Improvements (2020) Journal of Failure Analysis and
Prevention, 20 (3), pp. 1038-1054.
❖ Prabhakar, M., Prasad, A.K., Paswan, M.K. Fatigue Life Prediction of Lap Welds in Axle
Housings Using Notch Stress Modelling Approach and Design Modifications to Overcome
the Failure (2020) Journal of Failure Analysis and Prevention, 20 (3), pp. 995-1006.
❖ Uddin, S., Hassan, M.A., Singh, S.S., Singh, D.K. Methanol-Filled Hybrid Photonic Crystal
Fiber with High Birefringent and Negative Dispersion (2020) Brazilian Journal of Physics, 50
(3), pp. 282-290.
❖ Akhter, M.Z., Hassan, M.A. Energetic additives for hybrid rocket propulsion – Review (2020)
2020 Advances in Science and Engineering Technology International Conferences, ASET
2020, art. no. 9118206.
❖ Kishor, C., Kumar, S., Sharma, S., Singh, A.K. Effective utilization of F-type bottom ash by
enhancement of pozzolanic properties (2020) Energy Sources, Part A: Recovery, Utilization
and Environmental Effects, 42 (3), pp. 259-266.
❖ Akram, W., Sanjay, Hassan, M.A. Chemical looping combustion with nanosize oxygen carrier:
a review (2020) International Journal of Environmental Science and Technology.
❖ Singh, H., Kumar, S., Mohapatra, S.K. Improved surface morphology by reforming of oxygen
functional groups of Indian coal upon irradiating with microwave radiations (2020)
International Journal of Coal Preparation and Utilization.
❖ Ranjan, R., Niraj, M. A case study for selection of suitable vendor management using the
fuzzy logic technique (2020) International Journal on Emerging Technologies, 11 (2), pp.
304-307.
❖ Chordiya, J.S., Sharma, R.V. Numerical analysis of partition clustering in a high-temperature
gradient region for suppression of heat transfer in porous enclosure (2020) Springer
Proceedings in Mathematics and Statistics, 320, pp. 255-263.
❖ Kumar, V., Prasad, N., Paswan, M.K., Kumar, P., Biswas, S. Design Analysis and Pressure Loss
Optimization of Automobile Muffler (2020) Smart Innovation, Systems and Technologies,
169, pp. 93-107.
❖ Ranjan, R., Niraj, M. Case study of a manufacturing unit of West Bengal by using javascript
for calculation of overall equipment effectiveness (2020) International Journal on Emerging
Technologies, 11 (1), pp. 202-208.
❖ Shahiruddin, Hassan, M.A., Singh, M., Singh, D.K. Poly lactic acid, poly acrylic acid and
ethanol based bio-materials for PCF design (2020) Materials Science Forum, 978 MSF, pp.
377-383.
❖ Shahiruddin, Hassan, M.A., Kumar, A., Singh, D.K. Structural and behavioural analysis of
As2Se3, TeO2, SiC, SiO2 and Si3N4 for photonic application (2020) Materials Science Forum,
978 MSF, pp. 360-368.
❖ Chordiya, J.S., Sharma, R.V., Conjugate Natural Convection in Porous Medium with a Thick
Square-wave Partition, ASME, J. Thermal. Sci. Eng. Appl, Published online, June 18, 2020.
❖ Chordiya, J.S., Sharma, R.V., Numerical Analysis on the Effect of Wavy Partitions on Natural
Convection in Porous Enclosure, ASME, J. Heat Transfer, Published online, July 8, 2020.
Conferences/Syposiums/FDPs/Workshops❖ Nature of Event: Conference
Title: Electric Power and Renewable Energy Conference (EPREC-2020)
Date: May 29-30, 2020.Organized by: Department of Electrical EngineeringExperts Participated: 13Number of Participants/Attendees: 142Organizing Secretary(s): Dr. Om Hari Gupta, Dr. Jitendra Kumar, Prof. A. K. Singh
❖ Nature of Event: STC
Title: Recent Advancements in HVDC and FACTS (RAHF-2019)
Date: 23/09/2019 to 28/09/2019
Organized by: Department of Electrical Engineering
Experts Participated: 05
Number of Participants/Attendees: 72
Coordinators: Dr. Sanjay Kumar, Dr. Kumari Namrata
❖ Nature of Event: Two Days Online National Conference
Title: Advances in Sustainable Construction Materials (ASCM 2020)
Date: 03/08/2020 – 04/08/2020
Organized by: Department of Civil Engineering
Experts Participated: Prof. Nirjhar Dhang, IIT Kharagpur; Dr. Somnath Ghosh, Jadavpur
University; Dr. Indrajit Ghosh, IIT Roorkee; Dr. Sandeep Choudhary, IIT Indore; Dr. Rajan
Choudhary, IIT Guwahati etc.
Number of Participants/Attendees: 130
Coordinators: Dr. Subhadeep Metya, Dr. Sabyasachi Biswas, Dr. Sanjay Kumar
❖ Nature of Event: Three Days National Webinar/Video WorkshopTitle: Transforming Pedagogy in IndiaDate: 01/08/2020 – 03/08/2020Organized by: TEQIP-III, NIT JamshedpurExperts Participated: Prof. (Dr.) Inder Krishen Bhat, Vice-Chancellor, Manav RachnaUniversity; Prof. (Dr.) Karunesh Kumar Shukla Director, NIT Jamshedpur; Prof. (Dr.) Jagadanand Jha, Principal, MIT Muzaffarpur, Bihar; Prof. (Dr.) Phalguni Gupta, Vice-Chancellor, GLA University, Mathura; Dr. S. P. Mathur, Registrar, IIT BHU; Prof. (Dr.) ManojKumar Tiwari, Director, NITIE, Mumbai; Prof. (Dr.) Pradip Kumar Jain, Director, NIT PatnaNumber of Participants/Attendees: 657 from various academic Institutions across IndiaName of Coordinators: Dr. Ch. Madhusudana Rao, Prof. Anil Kumar Choudhary and Prof. Shalendra Kumar
❖ Nature of Event: Five Days Webinar/Video Workshop
Title: Placement challenges during prevailing economic crisis, gender bias and stress management in a post COVID world
Date: 27/06/2020 – 01/07/2020
Organized by: Dean (SW), NIT Jamshedpur
Experts Participated: 11
Number of Participants/Attendees: 450 students of NIT Jamshedpur
Name of Coordinators: Dr. Kumari Namrata, Dr. C. M. Rao and Dr. Shwati Sudha
❖ Nature of Event: Short Term Course
Title: Short Term Course on LaTeX Programming (LATEX 2019)
Date: from 08/07/2020 to 13/07/2020
Organized by: Department of Mathematics
Experts Participated: Dr. A. Swaminathan (IIT Roorkee, India); Dr. Ratikanta Behera (IISER Kolkata, India); Dr. Saiful Rahman Mondal (King Faisal University, Saudi Arabia)
Number of Participants/Attendees: 55
Coordinators: Dr. Sourav Das
❖ Nature of Event: Workshop
Title: Machine Vision 2020 (MV2020)
Date: from 27/07/2020 to 29/07/2020
Organized by: Dept of CSE and Dept of Computer Application
Experts Participated: Prof. V. M. Gadre, IIT Bombay; Prof. Geore Giakos
Number of Participants/Attendees: 60
Name of Coordinators: Dr. Koushlendra Kumar Singh and Dr. Chandrasekhar Azad
❖ Nature of Event: Conference
Title: The first International Conference on Advances in Distributed Computing and Machine Learning(ICADCML-2020)
Date:30/01/2020 to 31/01/2020
Organized by: School of IT and Engg., VIT Vellore, & NIT Jamshedpur.
Experts Participated: Prof. DVLN Somayajulu, IIITDM,Kurnool; Prof. P.K. JanaIIT-ISM,Dhanbad; Dr. Binayak Kar, NTUST, Taiwan; Dr. Fuxiang Chen,Senior Research Scientist in Deep Search Inc., Korea/Singapore.
Name of Coordinators: Asis Kumar Tripathy, VIT, Vellore; Tapan Kumar Das, VIT Vellore; Jyoti Prakash Sahoo, SOA Deemed to be University; Alekha Kumar Mishra, NIT Jamshedpur.
❖ Nature of Event: 8 Weeks NPIU Initiative Online Training Program
Title: Future Skill Technology (Identified by NASSCOM) Robotics and Automation
Date: 25/07/20 to 30/09/20
Organized by: Department of Mechanical Engineering
Name of Coordinators: Dr. Vijay Kumar Dalla
❖ Nature of Event: Online AICTE Training and Learning (ATAL) Academic Program
Title: Artificial Intelligence
Date: 08/06/20 to 12/06/20
Organized by: Department of Mechanical Engineering
Name of Coordinators: Dr. Vijay Kumar Dalla
❖ Nature of Event: Online AICTE Training and Learning (ATAL) Academic Program
Title: Robotics
Date: 25/05/20 to 29/05/20
Organized by: Department of Mechanical Engineering
Name of Coordinators: Dr. Vijay Kumar Dalla
❖ Nature of Event: TEQIP-III sponsored Three Days Online Training Programme
Title: Awareness and Preparedness for Placement in context of COVID-19
Date: From 23/07/20 to 25/07/20
Organized by: Training & Placement Cell, NIT Jamshedpur
Experts Participated: Dr. Yogesh Velankar, Mentor and Performance Auditor, TEQIP-III
Number of Participants/Attendees: 278
Name of Coordinators: Dr. Tushar Banerjee, Assistant Professor, Department of Production & Industrial Engineering.
Expert Lectures Delivered
❑ Name of Faculty Member: Dr. Om Hari Gupta
Title of the Lecture: Introduction to Microgrid & Islanding Detection
Details of Event: A webinar organized by the Faculty of Engineering, Pacific Academy of Higher
Education and Research University, Udaipur. The webinar was attended by nearly 90
participants.
Date: 27/06/2020 to 27/06/2020
University/Institute: Pacific Academy of Higher Education and Research University, Udaipur
❑ Name of Faculty Member: Dr. Jitendra Kumar
Title of the Lecture: Recent Challenges in Power System
Details of Event: A webinar organized by the Department of Electrical & Electronics
Engineering, IMS Engineering College, Ghaziabad. The webinar was attended by more than
100 participants.
Date: 19/06/2020 to 19/06/2020
University/Institute: IMS Engineering College, Ghaziabad
❑ Name of Faculty Member: Dr. Sanjay Kumar Vajpai, Asstt. Prof., Metallurgical and Materials Engineering
Title of the Lecture: Role of Microstructural designing for high performance structural materials
Details of Event: FDP on Recent Advancement in Materials and Joining Technology
Date: June 9th -13th, 2020.
University/Institute: SAGE University, Indore
❑ Name of Faculty Member: Dr. Awdhesh Kumar Choudhary, Assistant Professor, Department of Civil Engineering
Title of the Lecture: Career Through Research
Details of Event: Expert Talk at Sandip University, Maharashtra
Date: 19/04/2020
University/Institute: Sandip University, Maharashtra
❑ Name of Faculty Member: Dr. Subhadeep Metya, Assistant professor, Department of Civil Engineering
Title of the Lecture: Site Investigation, drilling methods, role of engineer in deciding the foundation type
Details of Event: Twinning Activities between WIT, Dehradun and NIT Jamshedpur
Date: 18/05/2020 – 19/05/2020
University/Institute: Women Institute of Technology, Dehradun
❑ Name of Faculty Member: Dr. Awdhesh Kumar Choudhary, Assistant Professor, Department of Civil Engineering
Title of the Lecture: Application of Geosynthetics Reinforcement in Several Civil Engineering Structures
Details of Event: Expert Lecture at Nalanda College of Engineering Chandi
Date: 13/06/2020
❑ Name of Faculty Member: Dr. Ch. Madhusudana Rao, Associate Professor Department of Civil Engineering
Title of the Lecture: Climate Change and River Basin Modelling: Existing gaps and Recent Research Developments
Details of Event: A One Week online FDP organized by Dept. of Civil Engg. CBIT, Hyderabad
Date: 09/07/2020
University/Institute: Chaitanya Bharathi Institute of Technology (CBIT) Hyderabad
❑ Name of Faculty Member: Dr. Subhadeep Metya, Assistant professor, Department of Civil Engineering
Title of the Lecture: Applications of Computational Geotechnics for Design of Geotechnical Systems
Details of Event: National Webinar Series 2020
Date: 11/07/2020
University/Institute: Pailan College of Management and Technology (PCMT), Kolkata
❑ Name of Faculty Member: Dr. Sourav Das, Assistant Professor, Department of Mathematics
Title : Functional Inequalities for the Generalized Wright Functions
Details of Event: 15th International Symposium on Orthogonal Polynomials, Special Functions and Applications (OPSFA)
Date: 22/07/2020 to 26/07/2020
University/Institute: Research Institute for Symbolic Computation of the Johannes Kepler University Linz.
❑ Name of Faculty Member: Sumit Kumar Debnath, Assistant Professor, Department of Mathematics
Title : Introduction to Multivariate Public Key Cryptography
Date: 10/02/2020 to 14/02/2020
University/Institute: Indian Institute of Technology Kharagpur
❑ Name of Faculty Member: Prof. Tarni Mandal, Professor, Department of Mathematics
Title of the Lecture: Sampling Distribution and Statistical Inference
Details of Event: "Sci-futura" (A Two-Day Event to commemorate National Science Day)
Date: 14/03/2020
University/Institute: B.A. College of Engineering and Technology, Ghutia
❑ Name of Faculty Member: Dr. Raj Nandkeolyar, Assistant Professor, Department of Mathematics
Title of the Lecture: Spectral Method Based Approximate Solutions of Similar Boundary Layer Equations Details of Event: Short Term Course on CFDDate: 29/06/2020 to 03/07/2020University/Institute: NIT Jamshedpur, Jamshedpur
❑ Name of Faculty Member: Dr. Rajat Tripathi, Assistant Professor, Department of Mathematics
Title of the Lecture: Fluid Dynamics and its Role in Modern Engineering Challenges: A Mathematical Analysis on Details of Event: One Day National Webinar on Fluid DynamicsDate: June 23, 2020University/Institute: Manipal University Jaipur.
❑ Name of Faculty Member: Dr. Tushar Banerjee, Assistant Professor, Department of Production and Industrial Engineering, NIT Jamshedpur
Title of the Lecture: ‘Placement Activities’ Details of Event: TEQIP-III Twinning Activities between WIT Dehradun and NIT Jamshedpur Date: From 27/05/20 to 27/05/20
University/Institute: Women Institute of Technology (WIT) Dehradun, Uttarakhand
❑ Name of Faculty Member: Dr. Tushar Banerjee, Assistant Professor, Department of Production and Industrial Engineering, NIT Jamshedpur
Title of the Lecture: ‘Surface Coating for Cutting Tool Application’ Details of Event: Guest lecture at Amity University, Jharkhand Date: From 29/05/20 to 29/05/20 University/Institute: Amity University, Jharkhand
❑ Name of Faculty Member: Dr. Ashish Das, Assistant Professor, Department of Production and Industrial Engg., NIT Jamshedpur
Title of the Lecture: “Additive Manufacturing in Biomedical Field”.
Details of Event: International Conference on “Future Engineering”
Date: 26/06/20 to 27/06/20
University/Institute: Jointly organized by Mazedan International Research Academy, Dr. RL Avadh University, Ayodhya & Dr. AIT Bangalore, Sponsored by TEQIP-III.
❑ Name of Faculty Member: Dr. Ashish Das, Assistant Professor, Department of Production and Industrial Engg., NIT Jamshedpur
Title of the Lecture: “Application of 3D Printing in Biomedical Field”.
Details of Event: National Webinar
Date: 26/06/20
University/Institute: Organized by the Department of Mechanical Engineering, SECAB Institute of Engineering & Technology.
❑ Name of Faculty Member: Dr. Ashish Das, Assistant Professor, Department of Production and Industrial Engg., NIT Jamshedpur
Title of the Lecture: “3D Printing in Biomedical Field”.
Details of Event: National Webinar
Date: 05/06/20 to 06/06/20
University/Institute: Organized by the Department of Mechanical Engineering, DumkaEngineering College, Dumka Jharkhand, Sponsored by TEQIP-III.
❑ Name of Faculty Member: Dr. Ashish Das, Assistant Professor, Department of Production and Industrial Engg., NIT Jamshedpur
Title of the Lecture: “3D Printing in Biomedical Field for Ongoing Pandemic Situation”.
Details of Event: National Webinar
Date: 20/05/20
University/Institute: Organized by the Department of Mechanical Engineering, Hyderabad Institute of Technology and Management.
❑ Name of Faculty Member: Dr. Vishesh Ranjan Kar, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Deformation behaviour of functionally graded sinusoidally-corrugated structure - A nonlinear finite element approach
Details of Event: Keynote address in International conference on Design, Automation and Control (ICDAC 2020)
Date: 7/1/2020
University/Institute: Vellore Institute of Technology Vellore, India.
❑ Name of Faculty Member: Dr. Ashok Kumar Mandal, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Dynamic modelling: Euler Lagrange formulation
Details of Event: AICTE Training and Learning (ATAL) FDP Program on Robotics
Date: 25/05/20 to 29/05/20
University/Institute: NIT Jamshedpur
❑ Name of Faculty Member: Dr. Vishesh Ranjan Kar, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Finite Element Analysis
Details of Event: Expert Talk
Date: 8/8/2020
University/Institute: G. H. Raisoni Institute of Engineering and Technology , Pune.
❑ Name of Faculty Member: Dr. Vishesh Ranjan Kar, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Finite Element Analysis of Composite Materials
Details of Event: AICTE Sponsored Six days Virtual STTP on “Finite Element Method for Engineering Applications"
Date: 7/8/2020
University/Institute: Sri Sairam Engineering College, Chennai, India
❑ Name of Faculty Member: Dr. Vishesh Ranjan Kar, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Key factors needed to be included in Research Proposal
Details of Event: One Week Virtual FDP on “Funding Opportunities for Engineering Teachers & Technical Paper Writing"
Date: 7/8/2020
University/Institute: Rajarambapu Institute of Technology, Islampur, MH, India
❑ Name of Faculty Member: Dr. Vijay Kumar Dalla, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Key factors needed to be included in Research Proposal
Details of Event: AICTE Training and Learning (ATAL) on Robotics
Date: 24 to 28th Aug 2020
University/Institute: Goverment Polytechnic Harapanahalli, Karnataka
❑ Name of Faculty Member: Dr. Vijay Kumar Dalla, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Mechatronics, Automation and Robotics
Details of Event: Five Days Online Faculty Development Programme (FDP)
Date: 3 -7 Aug 2020
University/Institute: OP Jindal University Raigarh, Chhattisgarh.
❑ Name of Faculty Member: Dr. Vijay Kumar Dalla, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Robotics
Details of Event: AICTE Training and Learning (ATAL)
Date: June 1st -5th, 2020.
University/Institute: University Institute of Engg. & Tech. Kurushetra
❑ Name of Faculty Member: Dr. Vijay Kumar Dalla, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Kinematic and Dynamics of a Robot
Details of Event: AICTE Training and Learning (ATAL)
Date: May 25 -29th, 2020.
University/Institute: MANIT Bhopal
❑ Name of Faculty Member: Dr. Vijay Kumar Dalla, Asstt. Prof., Mechanical Engineering
Title of the Lecture: Robotics
Details of Event: Global series of Alumni
Date: 23rd May 2020.
University/Institute: Government College of Engg. Bilaspur
❑ Name of Faculty Member: Dr. Bharat Bhushan Jha, Visiting Professor, Department of
Metallurgical and Materials Engineering
Title of the Lecture: A Practical Approach towards Damage Assessment of High Temperature
Components in Service
Details of Event: Protection of On-Shore and Off-Shore Facilities against Corrosion in the
Coastal Region” OFCCR-2020 during 20-24th January 2020 at Bhubaneswar
Date: 20 to 24th January, 2020
University/Institute: CSIR- IMMT Bhubaneswar
❑ Name of Faculty Member: Dr. Bharat Bhushan Jha, Visiting Professor, Department of
Metallurgical and Materials Engineering
Title of the Lecture: Impression Creep Behavior of Ti-6Al-4V Alloy: A Study on Various Creep
Deformation Mechanisms by TEM Analysis
Details of Event: 12th Asia-pacific Microscopy Conference ( APMC-2020 ), Hyderabad, India
Date: 3-7th FEB 2020
University/Institute: Electron Microscopy Society of India,
Institution Innovation Council (IIC) & Entrepreneurship Cell (E-Cell)
Established with a strong team of 60+ students, to increase the spiritof innovation and entrepreneurship in students of NIT Jamshedpur bynetworking with high Impact personalities and incubators, andorganizing Seminars, Quizzes, E-Talk, workshops to motivate thestudents towards innovation and entrepreneurship.
Other Developments
• Dr. Subhash Singh put his efforts in
procurement and installation of
Bottom Pouring Type Stir Casting
Machine (BSCM) Vacuum Die Casting &
Ultrasonic Vibrator Attachments for
Aluminium & Magnesium MMC
Advance Composite Laboratory.
• Dr. Dinesh Kumar put his efforts in
procurement and installation of 6-Axis
Articulated Robotic Arm in Advance
Manufacturing and FMS Laboratory.
• Dr. Mayuri Baruah put her efforts in
procurement and installation of
Micro Plasma Welding in Advance
Welding Laboratory.
• Dr. Subhadeep Metya wasawarded the IGS-HEICO YoungGeotechnical Engineer Award forthe year 2018 by the IndianGeotechnical Society (New Delhi)at IISc, Bangalore.
Upcoming Conferences/Symposiums/FDPs
At NIT Jamshedpur
1. Two days online National Conference on Recent Advances in Structural Engineering 2020,
NCRASE 2020, on August 21-22, 2020, organized by DEPARTMENT OF CIVIL ENGINEERING,
National Institute of Technology Jamshedpur.
2. Two days online National Conference on Research and Developments in Material
Processing, Modelling and Characterization 2020(RDMPMC20), on August 26-27th,
2020,organized by DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING &
DEPARTMENT OF PRODUCTION AND INDUSTRIAL ENGINEERING, National Institute of
Technology Jamshedpur.
3. 1st National Conference on “Materials, Mechanics and Modelling” NCMMM-2020, on
August 29-30, 2020, Organised by DEPARTMENT OF MECHANICAL ENGINEERING,
National Institute of Technology Jamshedpur.
4. 2-day National Conference on Electronics, Communication and Computation, on
September 5-6, 2020, organized by DEPARTMENT OF ELECTRONICS AND
COMMUNICATION ENGINEERING, NIT Jamshedpur.
5. A National Conference on ROLE OF WOMEN IN NATION DEVELOPMENT [NCRWND-2020]
on September 5-6, 2020, Organized by NIT JAMSHEDPUR and WIT DEHRADUN.
6. Two days online National Conference (Online) on Advanced Modelling and Innovations in
Water Resources Engineering (AMIWRE-2020) on September 19-20, 2020, organized by
DEPARTMENT OF CIVIL ENGINEERING, NIT Jamshedpur.
7. Conference on IoT and its Applications (CIA-2020), August 29-30, 2020, organized by
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING, NIT Jamshedpur.