National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.
-
Upload
douglas-jacobs -
Category
Documents
-
view
250 -
download
6
Transcript of National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.
![Page 1: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/1.jpg)
![Page 2: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/2.jpg)
National Electric CodeNational Electric Code
29 CFR 1910 Subpart S29 CFR 1910 Subpart S
![Page 3: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/3.jpg)
29 CFR 1910.13729 CFR 1910.137
![Page 4: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/4.jpg)
Terms usedNEC - National Electric Code
CFR - Codes of Federal Regulations
3M Program - Material Maintenance Management
GFCI - Ground Fault Circuit Interrupter
BMS - Building Maintenance Supervisor
NEC - National Electric Code
CFR - Codes of Federal Regulations
3M Program - Material Maintenance Management
GFCI - Ground Fault Circuit Interrupter
BMS - Building Maintenance Supervisor
![Page 5: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/5.jpg)
National Electric Code29 CFR 1910 Subpart SNational Electric Code29 CFR 1910 Subpart S
Standards for electrical systems, installations, tools
and equipment
Standards for electrical systems, installations, tools
and equipment
![Page 6: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/6.jpg)
OPNAVINST 5100.23 seriesOPNAVINST 5100.19 seriesOPNAVINST 5100.23 seriesOPNAVINST 5100.19 series
Shore and afloat safety program
manuals
Shore and afloat safety program
manuals
![Page 7: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/7.jpg)
29 CFR 1910.13729 CFR 1910.137
Testing and inspection of
electrically insulated gloves.
Testing and inspection of
electrically insulated gloves.
![Page 8: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/8.jpg)
SPAWARINST 5100.9 seriesSPAWARINST 5100.9 series
Maintenance and repair of electronic
equipment ashore
Maintenance and repair of electronic
equipment ashore
![Page 9: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/9.jpg)
PolicyPolicyA command supported electrical safety
program shall be established. Activities are required to comply with Material
Maintenance Management (3M) provisions, if applicable. Additionally, classroom spaces which are directly related to fleet training evolutions must comply with applicable
provisions of OPNAVINST 5100.19 (series) and NSTM chapter 300, as applicable.
A command supported electrical safety program shall be established. Activities are
required to comply with Material Maintenance Management (3M) provisions, if
applicable. Additionally, classroom spaces which are directly related to fleet training evolutions must comply with applicable
provisions of OPNAVINST 5100.19 (series) and NSTM chapter 300, as applicable.
![Page 10: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/10.jpg)
(continued)(continued)
All other spaces and non-training evolutions must comply with
29 CFR 1910 Subpart S and other related nationally recognized electrical
standards, as adopted by
OPNAVINST 5100.23 (series).
All other spaces and non-training evolutions must comply with
29 CFR 1910 Subpart S and other related nationally recognized electrical
standards, as adopted by
OPNAVINST 5100.23 (series).
![Page 11: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/11.jpg)
(continued) (continued)The maintenance and repair of electronic
equipment ashore is governed by SPAWARINST 5100.9 (series). Potential regulatory conflicts that may arise within
the fleet-simulated training environments are to be resolved in favor
of NAVSHIP/NAVSEA or
OPNAVINST 5100.19 (series) as applicable.
The maintenance and repair of electronic equipment ashore is governed by
SPAWARINST 5100.9 (series). Potential regulatory conflicts that may arise within
the fleet-simulated training environments are to be resolved in favor
of NAVSHIP/NAVSEA or
OPNAVINST 5100.19 (series) as applicable.
![Page 12: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/12.jpg)
A Electrical Safety program is…...
A Electrical Safety program is…...
Designed to minimize
electrical, fire and shock hazards
Designed to minimize
electrical, fire and shock hazards
![Page 13: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/13.jpg)
Poor Tension…...Poor Tension…...
Electrical receptacles that have poor tension increases resistance which eventually results in an electrical arc
or fire.
Electrical receptacles that have poor tension increases resistance which eventually results in an electrical arc
or fire.
![Page 14: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/14.jpg)
To protect personnel against short circuits, the grounding contact tension must be maintained so the
grounding path is not breached.
To protect personnel against short circuits, the grounding contact tension must be maintained so the
grounding path is not breached.
![Page 15: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/15.jpg)
Incorrect wiring, improper installation and worn
electrical equipment pose hazards to personnel and
equipment.
Incorrect wiring, improper installation and worn
electrical equipment pose hazards to personnel and
equipment.
![Page 16: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/16.jpg)
Poor tension on electrical conductors.
![Page 17: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/17.jpg)
Ensure ALL electrical plugs have no exposed wiring present during routine inspections...
![Page 18: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/18.jpg)
![Page 19: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/19.jpg)
![Page 20: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/20.jpg)
![Page 21: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/21.jpg)
![Page 22: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/22.jpg)
![Page 23: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/23.jpg)
Electrical Receptacle Requirements
Electrical Receptacle Requirements
A vigorous receptacle testing program shall be conducted. Each receptacle shall
be tested at least annually. Defective receptacles shall be replaced.
The Following slides describe what shall be verified:
A vigorous receptacle testing program shall be conducted. Each receptacle shall
be tested at least annually. Defective receptacles shall be replaced.
The Following slides describe what shall be verified:
![Page 24: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/24.jpg)
The physical integrity (NOT CRACKED OR
BROKEN) for each receptacle shall be
confirmed by visual inspection.
The physical integrity (NOT CRACKED OR
BROKEN) for each receptacle shall be
confirmed by visual inspection.
![Page 25: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/25.jpg)
The continuity of the grounding circuit in each receptacle shall
be verified.
The continuity of the grounding circuit in each receptacle shall
be verified.
![Page 26: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/26.jpg)
Correct polarity of the hot, neutral and
grounding connections in each electrical
receptacle shall be confirmed.
Correct polarity of the hot, neutral and
grounding connections in each electrical
receptacle shall be confirmed.
![Page 27: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/27.jpg)
OPEN
NEUTRAL
![Page 28: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/28.jpg)
HOT & GROUND REVERSED
![Page 29: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/29.jpg)
OPENGROUND
![Page 30: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/30.jpg)
CORRECTCORRECT
![Page 31: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/31.jpg)
The retention force of each connection (hot, neutral and
grounding) of each receptacle (except locking type
receptacles) shall not be LESS than four ounces.
The retention force of each connection (hot, neutral and
grounding) of each receptacle (except locking type
receptacles) shall not be LESS than four ounces.
![Page 32: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/32.jpg)
A record shall be maintained for electrical inspections. Each
receptacle need NOT be listed. Areas specific to the inspection should be noted (e.g., Building
1405, 2ud deck). List discrepancies and abatement
action.
A record shall be maintained for electrical inspections. Each
receptacle need NOT be listed. Areas specific to the inspection should be noted (e.g., Building
1405, 2ud deck). List discrepancies and abatement
action.
![Page 33: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/33.jpg)
GFCI receptacles shall be tested. Both
receptacles of a duplex GFCI receptacle shall be
tested.
GFCI receptacles shall be tested. Both
receptacles of a duplex GFCI receptacle shall be
tested.
![Page 34: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/34.jpg)
A program of regular (at least annually) inspection of
electrical equipment including receptacles to detect and
correct unsafe conditions in all buildings, barracks, etc.
A program of regular (at least annually) inspection of
electrical equipment including receptacles to detect and
correct unsafe conditions in all buildings, barracks, etc.
![Page 35: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/35.jpg)
Equipment will be checked for grounding, loose wiring,
frayed cords, intact grounding pin and equipment damage. Electrical equipment used
around swimming pools shall be checked daily prior to use.
Equipment will be checked for grounding, loose wiring,
frayed cords, intact grounding pin and equipment damage. Electrical equipment used
around swimming pools shall be checked daily prior to use.
![Page 36: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/36.jpg)
Installations and changes to electrical wiring, fittings,
attachments, or other electrical appliances shall
be made by qualified personnel.
Installations and changes to electrical wiring, fittings,
attachments, or other electrical appliances shall
be made by qualified personnel.
![Page 37: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/37.jpg)
Defective electric cords, lighting fixtures, appliances,
receptacles and switches shall be reported immediately to the BMS and the command Safety Representative for
corrective action.
Defective electric cords, lighting fixtures, appliances,
receptacles and switches shall be reported immediately to the BMS and the command Safety Representative for
corrective action.
![Page 38: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/38.jpg)
All electrical apparatus must bear the label of/or be
listed by a testing/listing facility (i.e., Underwriters Laboratories or Factory
Mutual).
All electrical apparatus must bear the label of/or be
listed by a testing/listing facility (i.e., Underwriters Laboratories or Factory
Mutual).
![Page 39: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/39.jpg)
![Page 40: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/40.jpg)
How about this for a SURGE PROTECTOR!
![Page 41: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/41.jpg)
![Page 42: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/42.jpg)
![Page 43: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/43.jpg)
![Page 44: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/44.jpg)
Ungrounded extension cords
(Zip cords) are not permitted.
Ungrounded extension cords
(Zip cords) are not permitted.
![Page 45: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/45.jpg)
![Page 46: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/46.jpg)
Locally prepared extension cords made with
handy/junction boxes with knockouts are prohibited. Multi-receptacle adapters (octopus) are prohibited.
Locally prepared extension cords made with
handy/junction boxes with knockouts are prohibited. Multi-receptacle adapters (octopus) are prohibited.
![Page 47: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/47.jpg)
![Page 48: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/48.jpg)
![Page 49: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/49.jpg)
![Page 50: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/50.jpg)
![Page 51: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/51.jpg)
![Page 52: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/52.jpg)
![Page 53: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/53.jpg)
![Page 54: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/54.jpg)
Electric space heaters will be equipped with tip
over shut-off switches.
Electric space heaters will be equipped with tip
over shut-off switches.
![Page 55: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/55.jpg)
An electrical tool issue, testing and repair program shall be
instituted. Procedures governing tool control, safety
and use should be promulgated at the command
level.
An electrical tool issue, testing and repair program shall be
instituted. Procedures governing tool control, safety
and use should be promulgated at the command
level.
![Page 56: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/56.jpg)
GFCI protection that is 125 volt, single phase, 15-20 amperage shall be present
for the following...
GFCI protection that is 125 volt, single phase, 15-20 amperage shall be present
for the following...
Outdoors where there is direct grade level access (located not more than 6 feet 6 inches
above the ground) to the receptacles.
Outdoors where there is direct grade level access (located not more than 6 feet 6 inches
above the ground) to the receptacles.
In bathrooms, kitchens and deep sink rooms where receptacles are within six feet of sinks.In bathrooms, kitchens and deep sink rooms where receptacles are within six feet of sinks.
In garagesIn garages
![Page 57: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/57.jpg)
A record will be maintained and a durable tag affixed to floor
buffers certifying serviceability and date of last inspection. For all other equipment, either a tag or a system of colored tape attached to
the cord may be used.
A record will be maintained and a durable tag affixed to floor
buffers certifying serviceability and date of last inspection. For all other equipment, either a tag or a system of colored tape attached to
the cord may be used.
![Page 58: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/58.jpg)
Test and inspection of electrical insulated gloves will
be in accordance with 29 CFR 1910.137
with records of tests being maintained.
Test and inspection of electrical insulated gloves will
be in accordance with 29 CFR 1910.137
with records of tests being maintained.
![Page 59: National Electric Code 29 CFR 1910 Subpart S 29 CFR 1910.137.](https://reader035.fdocuments.net/reader035/viewer/2022081722/56649cf85503460f949c9087/html5/thumbnails/59.jpg)
Audio Visual personnel are responsible for
maintenance and repair of government owned
training aid equipment.
Audio Visual personnel are responsible for
maintenance and repair of government owned
training aid equipment.