Napoleon/Lynx

Full Line Manufacturer Of Garage Door Products

http://www.lynx-nsw.com/

History

- Family-owned for more than 25 years

- 1977 – became first company to manufacture electric door openers in Canada

- 1980's – acquired Ambassador Manufacturing, one of the largest door manufacturers in Canada

- 1980's – acquired J.M. Die Company, well-known hardware stamping and rolling company

- 1986 – acquired Napoleon Spring Works in Ohio

Company Characteristics

- One of the largest manufacturers of garage door hardware and operators in the world

- 5 manufacturing facilities

- 3 in United States and 2 in Canada

- Over 500,000 sq. ft. of manufacturing facilities

- Doing business in over 40 countries

Manufacturing Facilities

Manufacturing Facilities

Manufacturing Facilities

Manufacturing Facilities

Products

- Full Line Manufacturer of Sectional Hardware, and Operators

- Torsion and Extension Springs

- Rolling Steel Hardware Accessories, and Operators

Sectional Hardware

- Hinges

- Top Brackets

- Bottom Brackets

- End Bearing and Center Bearing Plates

- Drums

- Rollers

- Chain Hoists

- Vertical and Horizontal Track

- Assembled or Non Assembled

- Angles

- Cable....... AND MUCH MORE!!!!!

Torsion and Extension Springs

Torsion Springs- Wire Size available from 0.187” to 0.500”

- Inside Diameter available from 1-3/4” to 6”

- Available in lengths of 144” (or 12')

- With or without cones installed

Extension Springs- Available in single loop, double loop, or clipped

- Single loop for doors 7'-9' from 50 to 190 lbs

- Clipped for doors 7'-12' from 200 to 400 lbs

Rolling Steel Hardware

- Springs

- Rings

- Chain Hoists

- Shafts

- Angle Guides

- Barrel Plugs

- Endlocks and Windlocks

- Accessories and MORE

(would like picture of rolling steel door w/ our products)

LDJ

Characteristics

- ½ HP

- 115 V

- Single Phase

Capabilities

- Max Door Height – 14'

- Max Door Weight – 660lbs

- 12 cycles/hour

LDJ

Characteristics

- ½ HP

- 115 V

- Single Phase

Capabilities

- Max Door Height – 4.26m

- Max Door Weight – 300kgs

- 12 cycles/hour

MCJ

Characteristics

- ½ HP, ¾ HP, and 1HP

- 115, 230, 208/230, 460, or 575 V

- Single or Three Phase

Capabilities

- Max Door Height – 20'

- ½ HP - 880 lbs max

- ¾ HP – 1,260 lbs max

- 1 HP – 1,575 lbs max

- Up to 25 cycles/hour

MCJ

Characteristics

- ½ HP, ¾ HP, and 1HP

- 115, 230, 208/230, 460, or 575 V

- Single or Three Phase

Capabilities

- Max Door Height – 6.09m

- ½ HP - 400kgs max

- ¾ HP – 572kgs max

- 1 HP – 715kgs max

- Up to 25 cycles/hour

MCJH

Characteristics

- ½ HP, ¾ HP, and 1HP

- 115, 230, 208/230, 460, or 575 V

- Single or Three Phase

Capabilities

- Max Door Height – 20'

- ½ HP - 880lbs max

- ¾ HP – 1,260lbs max

- 1 HP – 1,575lbs max

- Up to 25 cycles/hour

MCJH

Characteristics

- ½ HP, ¾ HP, and 1HP

- 115, 230, 208/230, 460, or 575 V

- Single or Three Phase

Capabilities

- Max Door Height – 6.09m

- ½ HP - 400kgs max

- ¾ HP – 572kgs max

- 1 HP – 715kgs max

- Up to 25 cycles/hour

GHO

Characteristics

- ½ HP, ¾ HP, 1 HP, 2 HP, 3 HP, 5 HP

- 115, 230, 208/230, 460, or 575 V

- Single or Three Phase

Capabilities

- Max Door Height – 30'

- ½ HP - 1,050lbs max

- ¾ HP – 1,500lbs max

- 1 HP – 2,000lbs max

- Over 25 cycles/hour

GHO

Characteristics

- ½ HP, ¾ HP, 1 HP, 2 HP, 3 HP, 5 HP

- 115, 230, 208/230, 460, or 575 V

- Single or Three Phase

Capabilities

- Max Door Height – 9.14m

- ½ HP - 477kgs max

- ¾ HP – 681kgs max

- 1 HP – 909kgs max

- Over 25 cycles/hour

Job Sites

Commercial/Industrial

- 32.5' x 14'

- 1,300lbs

13 Hinge 7 Section

- 9.9m x 4.2m

- 590kgs

Job Sites

Products in Action

Other Info

- (looking for additional product pictures/videos)

- (this is what customers seem to be most interested in, especially if they are unfamiliar with our company)

- (links to materials and/or product videos)

Contact Us

- Napoleon Spring Works Inc.

111 Weires Road

Archbold, Ohio

43502, USA

800-338-5399

(419) 445-1010

sales@lynx-nsw.com

- Napoleon Spring Works Inc.

101 North 57th Ave

Phoenix, Arizona

85043, USA

800-233-3599

(602) 352-1010

sales@lynx-nsw.com

- Napoleon Spring Works Inc.

166 Gould Ave

Paterson, New Jersey

07503, USA

800-234-5969

(973) 278-5588

sales@lynx-nsw.com

- Lynx Industries Inc.

6311 Vipond Drive

Mississauga, Ontario

L5T 1T7, Canada

888-839-5969

(905) 564-2227

sales@lynx-nsw.com

- Lynx Industries Inc.

175 Upper Edison

St-Lambert, Québec

J4R 2R3, Canada

888-589-5969

(514) 866-1068

sales@lynx-nsw.com