Nanometer Scale LithographyAlso Known as Nanolithography. It is the making of semiconductor devices on an atomic scale level to no more than 100 nm by transferring patterns to one

medium to another. There are multiple techniques which include photolithography, x-ray nanolithography, electron beam direct-write

lithography, extreme ultraviolet lithography, and ion beam lithography.

Vicki Bourget & Vinson Gee

April 23, 2014

Outline• Basic Components• Photolithography• X-ray nanolithography• Electron Beam Direct-Write Lithography• Extreme Ultraviolet Lithography• Charged Particle Lithography

Optical Lithography Basic Components• Source• Condenser

• Collects the source radiation and directs it onto the mask

• Mask• Contains the pattern to be printed on the wafer

• Reduction imaging lens • Projects an image of the mask onto the silicon

wafer

Photolithography• Uses light to transfer a

pattern from photomask to a photoresist chemical on the substrate

• Chemical treatments engraves the exposure pattern into the material under the photoresist

• Most cost effective• Requires a flat substrate

Image From: Lin

X-Ray Nanolithography

• Selectively remove parts of a thin film

• Uses x-rays to transfer pattern from mask to photoresist on the substrate

• Requires special mask sensitive to x-rays

• Used for batch processing

Image From: Antony

Electron Beam Direct Write Lithography• Electron beam Lithography has the ability to

fabricate patterns that have nanometer feature sizes• Short wavelength and reasonable energy densities

• Direct writing is the most common approach for electron beam lithography

• Most often used in mask making, prototyping, fabrication of special small volume products, and research and development for advanced applications

• Not often used in mass production due to a speed limitation

Electron Beam Direct Write Lithography

• Direct writing consists of a source of electrons, a focusing optics set, a blanker to turn the beam on and off, a deflection system for moving the beam and a stage for holding the substrate

(Image from Ampere)

Electron Beam Direct Write Lithography• It is the most desirable process because it is

capable of superior resolution and requires no expansive projection optics or time consuming mask production

• Two types of beams used

• Gaussian round beam that moves with the wafer to expose the wafer one pixel at a time

• Can be classified as vector scans

• Variable shaped beam uses parallel electron beams to write a primitive shape in one shot

• More speed is gained but the resolution is sacrificed

• Speed vs detail

Extreme Ultra Violet Lithography

• Uses a laser-produced plasma source of radiation, a reflective mask and a 4x all reflective imaging system

• Ideal for creating a high volume of integrated circuits using wavelengths below 100 nm

• EUVL manufacturing must be done in a vacuum using reflective mirrors and masks since all materials strongly absorb ultraviolet light

Extreme Ultra Violet Lithography

This image shows a simple EUVL process where the radiation from the laser-produced plasma illuminates a mask onto the silicon wafer substrate where the IC’s are built

(Image from Stulen)

Ion Beam Lithography

• Similar to electron beam lithography, but the key difference is that ion lithography uses heavier, charged ions

• Heavier ion particles have more momentum and offers high resolution patterning than UV, x-ray, or electron beam lithography

• Uses include nanometer pattern fabrication and direct doping of the substrate

• Boron and Phosphorus ions are commonly used

Ion Beam Lithography

• There are several methods of ion beam lithography• Focused ion beam lithography (FIB)

• Masked ion beam lithography (MIB)

• Ion beam projection lithography (IBP)

Summary

• Nanolithography is the making of semiconductor devices on an atomic level to no more that 100 nm

• Used to create small integrated circuits and printed circuit boards

• They are still improving the techniques

ReferencesAmpere A. Tseng, Kuan Chen, Chii D. Chen, Kung J. Ma, “Electron

Beam Lithography in Nanoscale Fabrication: Recent Development,” IEEE Transactions on Electronics Packaging Manufacturing, Vol. 26, No. 2, April 2003, p. 141-149, PDF

Antony Bourdillon and Yuli Vladimirsky, “X-ray Lithography on the Sweet Spot”, UHRL, San Jose, (2006)

Lin, B. J., "Optical Lithography", SPIE Press, Bellingham, WA, 2009, p. 136.

Okazaki, Shinji, “Comparison of Optical, X-ray, Electron and Ion Beam Lithography,” Microelectronic Engineering 9 (1989), p. 297-304, North-Holland, PDF.

Stulen, Richard H. and Donald W. Sweeney, “Extreme Ultraviolet Lithography,” IEEE Journal of Quantum Electronics, Vol. 35, No. 5, May 1999, p. 694 – 699, PDF

Key Concepts

• Basic components for lithography are source, condenser, mask, and reduction imaging lens.

• Photolithography is the most cost effective technique.

• Most common application is integrated circuits.

• Electron beam uses either round beam or variable shaped beam.

• EUV is ideal for creating a high volume of integrated circuits using wavelengths below 100 nm.