Name: Machine Tools Inspection and Evaluation Center ...

ISO/IEC 17025 认可证书

No. CNAS L7367

The scope of the accreditation in Chinese remains the definitive version.

第 1 页共 56 页

Name: Machine Tools Inspection and Evaluation Center, Institute of Machinery Manufacturing Technology,

China Academy of Engineering Physics

Address: No.596, Yinhe Road, Shuangliu District, Chengdu, Sichuan, China

Registration No. CNAS L7367

Accreditation Criteria: ISO/IEC 17025 and relevant requirements of CNAS

Effective Date: 2017-12-01

SCHEDULE 3 ACCREDITED TESTING SCOPE

Item/Parameter№ Test Object

№ Item/ ParameterStandard or Method Note

Ⅰ Metal-cutting machine tools

1 Safety and health Metal-cutting machine tools-General safeguarding specification GB 15760-2004 /

2 Electrical equipmentElectrical safety of machinery-Electrical equipment of machines-Part1： General requirements GB 5226.1-2008IEC 60204-1:2005 /

3 Machining testTest code for machine tools Part 1： Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 ISO 230-1:1996 4Test code for machine tools Part 1： Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 ISO 230-1:1996 5.2

1Metal-cutting machine tools(parameter)

4 Geometric accuracyTest code for machine tools Part 1： Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998


No. CNAS L7367


第 2 页共 56 页

№ Test ObjectItem/Parameter

Standard or Method Note№ Item/ Parameter

ISO 230-1:1996 5.3

Test code for machine tools Part 1： Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 ISO 230-1:1996 5.4Test code for machine tools Part 1： Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 ISO 230-1:1996 5.5Test code for machine tools Part 1： Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 ISO 230-1:1996 5.6Test code for machine tools —Part 7:Geometric accuracy of axes of rotation ISO 230-7:2006 /

Geometric accuracy of axes of rotation GB/T 17421.7-2016 /

Test code for machine tools Part 2： Determination of accuracy and repeatability of positioning numerically controlled axes GB/T 17421.2-2000 ISO 230-2:1997VDI/DGQ 3441.3:1977 /Test code for machine tools Part 2： Determination of accuracy and repeatability of positioning numerically controlled axes GB/T 17421.2-2016ISO 230-2:2006 /

5 Accuracy of positioning

Test code for machine tools part 6： Determination of posioning accuracy on body and face diagonals（Diagonal displacement tests） GB/T 17421.6-2016ISO 230-6：2002 /Test code for machine tools Part 4： Circular tests for numerically controlled machine tools GB/T 17421.4-2003ISO 230-4:1996 /6 Circular tests

Test code for machine tools Part 4： Circular tests for numerically controlled


No. CNAS L7367


第 3 页共 56 页



machine tools GB/T 17421.4-2016ISO 230-4:2005 /

7 Hydraulic system Hydraulic system general specifications for metal cutting machine tools GB/T 23572-2009 /

8 Static rigidity Metal-cutting machine tools-Test code for static rigidity GB/T 13574-1992 /

9 Vibration Metal-cutting machine tools-Measurement method for vibration GB/T 16768-1997 /

10 Sound pressure levels Metal-cutting machine tools-Measurement method of sound pressure level GB/T 16769-2008 /

11 Thermal effectsTest code for machine tools-Part3：Determination of thermal effects GB/T 17421.3-2009ISO 230-3:2001 /

12 Appearance General specifications for metal-cutting machine tools GB/T 9061-2006 4.3

13 Parameter General specifications for metal-cutting machine tools GB/T 9061-2006 4.5

14 Under no-load run test General specifications for metal-cutting machine tools GB/T 9061-2006 4.6

15 Load test General specifications for metal-cutting machine tools GB/T 9061-2006 4.7

16 Insulation resistance Electrical equipment of industrial machines-Insulation resistance test specifications GB/T 26675-2011 /

17 High-voltage test Electrical equipment of industrial machines-High-voltage test specifications GB/T 26676-2011 /

18The continuity of the protective bonding circuit test

Electrical,electronic and programmable electronic control systems of machine tools-Specification of the continuity of the protective bonding circuit test GB/T 26679-2011 /

2 Machining centres All Parameters Machining centres-Specifications JB/T 8801-1998 /


No. CNAS L7367


第 4 页共 56 页



1 Quality of processing and assembly Machining centres-Specifications JB/T 8801-1998 5

2 Under no-load run test Machining centres-Specifications JB/T 8801-1998 6

3 Load test Machining centres-Specifications JB/T 8801-1998 7

4 Minimum setting unit test Machining centres-Specifications JB/T 8801-1998 8

5 Origin return test Machining centres-Specifications JB/T 8801-1998 9

6 Safety and health Machining centres-Safeguarding specification GB 18568-2001 /

Test conditions for machining centres-Part 1：Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z-axis) GB/T 18400.1-2010ISO 10791-1:1998 /7 Geometric accuracyTest conditions for machining centres-Part 2：Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis) GB/T 18400.2-2010 ISO 10791-2:2001 /

8 Machining testTest conditions for machining centres-Part 7：Accuracy of a finished test piece GB/T 18400.7-2010ISO 10791-7:1998 /

9Accuracy of positioning of linear and rotary axes

Test conditions for machining centres-Part 4：Accuracy and repeatability of positioning of linear and rotary axes GB/T 18400.4-2010ISO 10791-4:1998 /

10Accuracy of positioning of work-holding pallets

Test conditions for machining centres-Part 5： Accuracy and repeatability of positioning of work-holding pallets GB/T 18400.5-2010ISO 10791-5:1998 /

11 Accuracy of feeds,speeds and

Test conditions for machining centres-Part 6：Accuracy of feeds,speeds and interpolations GB/T 18400.6-2001


No. CNAS L7367


第 5 页共 56 页



interpolations ISO 10791-6:1998 /

12 Circular testsTest conditions for machining centres-Part 8：Evaluation of the contouring performance in the three coordinate planes GB/T 18400.8-2001ISO 10791-8:2001 /

13The operating times of tool change and pallet change

Test conditions for machining centres-Part 9：Evaluation of the operating times of tool change and pallet change GB/T 18400.9-2007ISO 10791-9:2001 /

All Parameters Precision machining centres- Specifications GB/T 21012-2007 /

1 Safety and health Precision machining centres- Specifications GB/T 21012-2007 3.3

2 Quality of processing and assembly Precision machining centres- Specifications GB/T 21012-2007 3.4

3 Under no-load run test Precision machining centres- Specifications GB/T 21012-2007 4.6

4 Continuous under no-load run test Precision machining centres- Specifications GB/T 21012-2007 4.7

5 Load test Precision machining centres- Specifications GB/T 21012-2007 4.8

6 Minimum setting unit test Precision machining centres- Specifications GB/T 21012-2007 4.9

7 Origin return test Precision machining centres- Specifications GB/T 21012-2007 4.10

Test conditions for precision machining centres-Part1：Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis) GB/T 20957.1-2007 /

3Precision machining centres

8 Geometric accuracyTest conditions for machining centres-Part 2：Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis) GB/T 20957.2-2007 /


No. CNAS L7367


第 6 页共 56 页



9 Machining test Test conditions for precision machining centres-Part 7：Accuracy of a finished test piece GB/T 20957.7-2007 /

10Accuracy of positioning of linear and rotary axes

Test conditions for precision machining centres-Part 4： Accuracy and repeatability of positioning of linear and rotary axes GB/T 20957.4-2007 /

11Accuracy of positioning of work-holding pallets

Test conditions of precision machining centres-Part 5：Tests for accuracy and repeatability of positioning of work-holding pallets GB/T 20957.5-2007 /

High precision machining centres-Part 1：Accuracy tests for machines with horizontal spindle JB/T 10793.1-2007 41 Geometric accuracyHigh precision machining centres-Part 2：Accuracy tests for machines with vertical spindle JB/T 10793.2-2007 4High precision machining centres-Part 1：Accuracy tests for machines with horizontal spindle JB/T 10793.1-2007 52 Accuracy of

positioning High precision machining centres-Part 2：Accuracy tests for machines with vertical spindle JB/T 10793.2-2007 5High precision machining centres-Part 1：Accuracy tests for machines with horizontal spindle JB/T 10793.1-2007 6

4High precision machining centres

3 Machining testHigh precision machining centres-Part 2：Accuracy tests for machines with vertical spindle JB/T 10793.2-2007 6

All Parameters The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 /

1 Safety and health The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 5

2 Quality of processing and assembly

The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 6

5

The 5-axes simultaneous vertical machining centers

3 Under no-load run test The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 7


No. CNAS L7367


第 7 页共 56 页



4 Load test The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 8

5 Minimum setting unit test

The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 9

6 Origin return test The 5-axes simultaneous vertical machining centers-Part 2：Specifications JB/T 10792.2-2007 10

7 Geometric accuracy The 5-axes simultaneous vertical machining centers-Part1：Testing of the accuracy JB/T 10792.1-2007 5


The 5-axes simultaneous vertical machining centers-Part1：Testing of the accuracy JB/T 10792.1-2007 6

9 Machining test The 5-axes simultaneous vertical machining centers-Part1：Testing of the accuracy JB/T 10792.1-2007 7

All Parameters Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 /

1 Safety and health Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 5


Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 6

3 Under no-load run test Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 7

4 Load test Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 8


Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 9

6 Origin return test Turning-milling machining centers with a horizontal workholding spindle-Part 2：Specifications JB/T 10889.2-2008 10

6

Turning-milling machining centers with a horizontal workholing spindle

7 Geometric accuracy Turning-milling machining centers with a horizontal workholding spindle-Part 1：Testing of the accuracy JB/T 10889.1-2008 5


No. CNAS L7367


第 8 页共 56 页




Turning-milling machining centers with a horizontal workholding spindle-Part 1：Testing of the accuracy JB/T 10889.1-2008 6

9 Machining test Turning-milling machining centers with a horizontal workholding spindle-Part 1：Testing of the accuracy JB/T 10889.1-2008 7

All Parameters Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 /

1 Safety and health Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 5

2 Quality of processing and assembly Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 5

3 Under no-load run test Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 7

4 Load test Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 8

5 Minimum setting unit test Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 9

6 Origin return test Drilling machining centres-Part 2：Specifications JB/T 8648.2-2008 10

7 Geometric accuracy Drilling machining centres-Part 1:Testing of accuracy JB/T 8648.1-2008 4

7Drilling machining centres

8 Machining test Drilling machining centres-Part 1:Testing of accuracy JB/T 8648.1-2008 5

All Parameters Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 /

1 Safety and health Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 5


Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 6

8

numerically controlled turning machines and turning centres

3 Under no-load run test Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 7


No. CNAS L7367


第 9 页共 56 页



4 Load test Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 8


Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 9

6 Origin return test Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications JB/T 4368.1-2013 10Safety of machine tools-Small numerically controlled turning machines and turning centres GB 22997-2008 /7 Safety and health Safety of machine tools-Large numerically controlled turning machines and turning centres GB 22998-2008 /

8 Geometric accuracy

Test conditions for numerically controlled turning machines and turning centres-Part 1:Geometric test for machines with a horizontal workholding spindle GB/T 16462.1-2007ISO 13041-1:2004 /


Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes GB/T 16462.4-2007ISO 13041-4:2004 /

10 Circular tests

Test conditions for numerically controlled turning machines and turning centres-Part 7:Evaluation of contouring performance in the coordinate planes GB/T 16462.7-2009ISO 13041-7:2004 /

11 Thermal effectsTest conditions for numerically controlled turning machines and turning centres-Part 8：Evaluation of thermal distortions GB/T 16462.8-2009ISO 13041-8:2004 /

All Parameters NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 /9

NC general purpose parallel lathes 1 Function test NC general purpose parallel lathes-Test specifications of functions JB/T

4368.4-1996 5.1


No. CNAS L7367


第 10 页共 56 页



2 Sound pressure levels NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.2

3 Vibration NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.3

4 Thermal effects NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.4

5 Static rigidity NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.5

6 Transmission efficienty

NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.6

7 Dynamic perfoemance




9 Geometric accuracy of axes of rotation


10 Uniformity of rectilinear motion


11 Machining test NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.11

12 Production capacity NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.12

13 Continuous operation NC general purpose parallel lathes-Test specifications of functions JB/T 4368.4-1996 5.13

14 Parameter NC general purpose parallel lathes- Parameter JB/T 4368.2-1996 /

All Parameters CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 /10 CNC heavy duty

horizontal lathes 1 Safety and health CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 5


No. CNAS L7367


第 11 页共 56 页



2 Quality of processing and assembly CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 6

3 Under no-load run test CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 7

4 Load test CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 8

5 Origin return test CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 9.4

6 Minimum setting unit test CNC heavy duty horizontal lathes-Part 2:Specifications JB/T 8325.2-2006 9.5

All Parameters NC Mini lathes- Specification JB/T 8326.2-1996 /

1 Safety and health NC Mini lathes- Specification JB/T 8326.2-1996 5

2 Quality of processing and assembly NC Mini lathes- Specification JB/T 8326.2-1996 6

3 Under no-load run test NC Mini lathes- Specification JB/T 8326.2-1996 7

4 Load test NC Mini lathes- Specification JB/T 8326.2-1996 8

5The reverse difference of the axis of a linear motion

NC Mini lathes- Specification JB/T 8326.2-1996 9

6 Minimum setting unit test NC Mini lathes- Specification JB/T 8326.2-1996 10

7 Origin return test NC Mini lathes- Specification JB/T 8326.2-1996 11

11 NC Mini lathes accuracy

8Cutting tool incremental cutting test

NC Mini lathes- Specification JB/T 8326.2-1996 12


No. CNAS L7367


第 12 页共 56 页



All Parameters CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 /

1 Safety and health CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 5

2 Quality of processing and assembly CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 6

3 Under no-load run test CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 7

4 Load test CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 8

5 Minimum setting unit test CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 9.3

12CNC vertical turning machines

6 Origin return test CNC vertical turning machines-Part 2: Specifications JB/T 9934.2-2006 9.4

All Parameters Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 /

1 Safety and health Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 5


Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 6

3 Under no-load run test Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 7

4 Load test Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 8


Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 9

6 Origin return test Numerically controlled vertical chucking-turning machines and turning centres-Spesifications JB/T 11562-2013 10

13

Numerically controlled vertical chucking-turning machines and turning centres

7 Geometric accuracy NC vertical chucking lathes-Testing of the accuracy JB/T 9895.1-1999 6


No. CNAS L7367


第 13 页共 56 页



8 Machining test NC vertical chucking lathes-Testing of the accuracy JB/T 9895.1-1999 7

All Parameters Horizontal lathe-Part 2:Technical conditions JB/T 2322.2-2006 /

1 Safety and health Horizontal lathe-Part 2:Technical conditions JB/T 2322.2-2006 5

2 Quality of processing and assembly Horizontal lathe-Part 2:Technical conditions JB/T 2322.2-2006 6

3 Under no-load run test Horizontal lathe-Part 2:Technical conditions JB/T 2322.2-2006 7

4 Load test Horizontal lathe-Part 2:Technical conditions JB/T 2322.2-2006 8、9

5 Sound pressure levels Horizontal lathe-performance test method JB/T 2322.1-2002 5.1

6 Vibration Horizontal lathe-performance test method JB/T 2322.1-2002 5.2

7 Thermal effects Horizontal lathe-performance test method JB/T 2322.1-2002 5.3

8 Static rigidity Horizontal lathe-performance test method JB/T 2322.1-2002 5.4

9 Transmission efficienty Horizontal lathe-performance test method JB/T 2322.1-2002 5.5

10 Dynamic perfoemance Horizontal lathe-performance test method JB/T 2322.1-2002 5.6

11 Accuracy of positioning Horizontal lathe-performance test method JB/T 2322.1-2002 5.7

12 Uniformity of rectilinear motion Horizontal lathe-performance test method JB/T 2322.1-2002 5.8

Horizontal lathe-performance test method JB/T 2322.1-2002 5.9

14 Horizontal lathe

13 Machining test Acceptance conditions for general purpose parallel lathes-Testing of the accuracy GB/T 4020-1997 4.2


No. CNAS L7367


第 14 页共 56 页



14 Safety feature test Horizontal lathe-performance test method JB/T 2322.1-2002 5.10

15 Geometric accuracy Acceptance conditions for general purpose parallel lathes-Testing of the accuracy GB/T 4020-1997 4.1

16 Parameter General purpose parallel lathes-Part 3:Types and parameters JB/T 2322.3-2011 /

All Parameters High precision horizontal lathes-Specification JB/T 7420-1994 /

1 Safety and health High precision horizontal lathes-Specification JB/T 7420-1994 5

2 Quality of processing and assembly High precision horizontal lathes-Specification JB/T 7420-1994 6

3 Under no-load run test High precision horizontal lathes-Specification JB/T 7420-1994 7

4 Geometric accuracy High precision horizontal lathes- Part 1: Testing of the accuracy JB/T 8768.1-2011 4

15High precision general purpose parallel lathes

5 Machining test High precision horizontal lathes- Part 1: Testing of the accuracy JB/T 8768.1-2011 5

All Parameters Heavy duty horizontal lathes-Part 1: Specifications JB/T 3663.1-2006 /

1 Safety and health Heavy duty horizontal lathes-Part 1: Specifications JB/T 3663.1-2006 5

2 Quality of processing and assembly Heavy duty horizontal lathes-Part 1: Specifications JB/T 3663.1-2006 6

3 Under no-load run test Heavy duty horizontal lathes-Part 1: Specifications JB/T 3663.1-2006 7

4 Load test Heavy duty horizontal lathes-Part 1: Specifications JB/T 3663.1-2006 8

16 Heavy duty horizontal lathes

5 Geometric accuracy Test conditions for heavy duty horizontal lathe - Testing of the accuracy GB/T 23569-2009 5


No. CNAS L7367


第 15 页共 56 页



6 Machining test Test conditions for heavy duty horizontal lathe - Testing of the accuracy GB/T 23569-2009 6


Test conditions for heavy duty horizontal lathe - Testing of the accuracy GB/T 23569-2009 7

8 Parameter Heavy duty horizontal lathes-Part 2: TypeS and parameters JB/T 3663.2-2011 /

All Parameters Single and double column vertical turning machines-Part 3: Specifications JB/T 3665.3-2006 /

1 Safety and health Single and double column vertical turning machines-Part 3: Specifications JB/T 3665.3-2006 5


Single and double column vertical turning machines-Part 3: Specifications JB/T 3665.3-2006 6

3 Under no-load run test Single and double column vertical turning machines-Part 3: Specifications JB/T 3665.3-2006 7

4 Load test Single and double column vertical turning machines-Part 3: Specifications JB/T 3665.3-2006 8

5 Geometric accuracyTest conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: single and double column vertical turning and boring lathes GB/T 23582.1-2009 6

6 Machining testTest conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: single and double column vertical turning and boring lathes GB/T 23582.1-2009 7


Test conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: single and double column vertical turning and boring lathes GB/T 23582.1-2009 8

17 Vertical lathes

8 Parameter Vertical turning and boring lathes with one or two columns-Part 1: Types and parameters JB/T 3665.1-2011 /

18 Mini lathes All Parameters Mini lathes-Specification JB/T 4136-1996 /


No. CNAS L7367


第 16 页共 56 页



1 Safety and health Mini lathes-Specification JB/T 4136-1996 5

2 Quality of processing and assembly Mini lathes-Specification JB/T 4136-1996 6

3 Under no-load run test Mini lathes-Specification JB/T 4136-1996 7

4 Load test Mini lathes-Specification JB/T 4136-1996 8

5 Geometric accuracy Mini lathes-Testing of the accuracy JB/T 4136.2-1999 4

6 Machining test Mini lathes-Testing of the accuracy JB/T 4136.2-1999 5

Mini lathes-Parameters JB/T 4136.1-1999 /7 Parameter

Mini lathes-Series types JB/T 5598-1991 /

All Parameters CNC bed-type milling machines-Specifications JB/T 8329-2008 /

1 Safety and health CNC bed-type milling machines-Specifications JB/T 8329-2008 5

2 Quality of processing and assembly CNC bed-type milling machines-Specifications JB/T 8329-2008 6

3 Under no-load run test CNC bed-type milling machines-Specifications JB/T 8329-2008 7

4 Load test CNC bed-type milling machines-Specifications JB/T 8329-2008 8

5 Minimum setting unit test CNC bed-type milling machines-Specifications JB/T 8329-2008 9

6 Origin return test CNC bed-type milling machines-Specifications JB/T 8329-2008 10

19CNC bed-type milling machines

7 Geometric accuracy Test conditions for CNC bed-type milling machines-Testing of the accuracy-Part 1:Milling machines with horizontal spindle GB/T 20958.1-2007 5


No. CNAS L7367


第 17 页共 56 页



Test conditions for CNC bed-type milling machines-Testing of the accuracy-Part 2:Milling machines with vertical spindle GB/T 20958.2-2007 5Test conditions for CNC bed-type milling machines-Testing of the accuracy-Part 1:Milling machines with horizontal spindle GB/T 20958.1-2007 68 Accuracy of

positioning Test conditions for CNC bed-type milling machines-Testing of the accuracy-Part 2:Milling machines with vertical spindle GB/T 20958.2-2007 6Test conditions for CNC bed-type milling machines-Testing of the accuracy-Part 1:Milling machines with horizontal spindle GB/T 20958.1-2007 79 Machining test Test conditions for CNC bed-type milling machines-Testing of the accuracy-Part 2:Milling machines with vertical spindle GB/T 20958.2-2007 7

All Parameters CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 /

1 Safety and health CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 5

2 Quality of processing and assembly CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 6

3 Under no-load run test CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 7

4 Load test CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 8

5 Minimum setting unit test CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 9

6 Origin return test CNC Knee type vertical milling machines-Specification JB/T 9928.2-1999 10

Test conditions for CNC milling machines with table of variable height-Testing of accuracy-Part1:Machines with horizontal spindle GB/T 21948.1-2008 4

20

CNC milling machines with table of variable height

7 Geometric accuracy Test conditions for CNC milling machines with table of variable height-Testing of accuracy-Part 2:Machines with vertical spindle GB/T 21948.2-2008 4


No. CNAS L7367


第 18 页共 56 页



Test conditions for CNC milling machines with table of variable height-Testing of accuracy-Part1:Machines with horizontal spindle GB/T 21948.1-2008 58 Accuracy of

positioning Test conditions for CNC milling machines with table of variable height-Testing of accuracy-Part 2:Machines with vertical spindle GB/T 21948.2-2008 5Test conditions for CNC milling machines with table of variable height-Testing of accuracy-Part1:Machines with horizontal spindle GB/T 21948.1-2008 69 Machining test Test conditions for CNC milling machines with table of variable height-Testing of accuracy-Part 2:Machines with vertical spindle GB/T 21948.2-2008 6

All Parameters CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 /

1 Safety and health CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 5


CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 6

3 Under no-load run test CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 7

4 Load test CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 8


CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 9

6 Origin return test CNC universal tool milling machines-Part 2:Specifications GB/T 21949.2-2008 10

7 Geometric accuracy CNC universal tool milling machines-Part 1:Testing of the accuracy GB/T 21949.1-2008 5

21CNC universal tool milling machines


CNC universal tool milling machines-Part 1:Testing of the accuracy GB/T 21949.1-2008 6


No. CNAS L7367


第 19 页共 56 页



9 Machining test CNC universal tool milling machines-Part 1:Testing of the accuracy GB/T 21949.1-2008 7

All Parameters Numerical control portal-type boring and milling machines-Specifications JB/T 6600-2006 /Numerical control portal-type boring and milling machines-Specifications JB/T 6600-2006 5Copying type CNC plano-boring and milling machines with a fixed cross rail- Part 2: Specifications GB/T 25658.2-2010 51 Safety and health

NC copy planer-boring and milling machines with fixed cross rail- Specification JB/T 8330.2-1996 5Numerical control portal-type boring and milling machines-Specifications JB/T 6600-2006 6Copying type CNC plano-boring and milling machines with a fixed cross rail- Part 2: Specifications GB/T 25658.2-2010 62 Quality of processing

and assemblyNC copy planer-boring and milling machines with fixed cross rail- Specification JB/T 8330.2-1996 6Numerical control portal-type boring and milling machines-Specifications JB/T 6600-2006 7Copying type CNC plano-boring and milling machines with a fixed cross rail- Part 2: Specifications GB/T 25658.2-2010 73 Under no-load run test

NC copy planer-boring and milling machines with fixed cross rail- Specification JB/T 8330.2-1996 7Numerical control portal-type boring and milling machines-Specifications JB/T 6600-2006 8Copying type CNC plano-boring and milling machines with a fixed cross rail- Part 2: Specifications GB/T 25658.2-2010 84 Load test

NC copy planer-boring and milling machines with fixed cross rail- Specification JB/T 8330.2-1996 8

22

NC planer-boring and milling machines


Copying type CNC plano-boring and milling machines with a fixed cross rail- Part 2: Specifications GB/T 25658.2-2010 9


No. CNAS L7367


第 20 页共 56 页



NC copy planer-boring and milling machines with fixed cross rail- Specification JB/T 8330.2-1996 9Copying type CNC plano-boring and milling machines with a fixed cross rail- Part 2: Specifications GB/T 25658.2-2010 106 Origin return test NC copy planer-boring and milling machines with fixed cross rail- Specification JB/T 8330.2-1996 10Copying type CNC plano-boring and milling machines with a fixed cross rail - Part 1: Testing of the accuracy GB/T 25658.1-2010 47 Geometric accuracy NC copy planer-boring and milling machines with fixed cross rail- Accuracy JB/T 8330.1-1996 5


Copying type CNC plano-boring and milling machines with a fixed cross rail - Part 1: Testing of the accuracy GB/T 25658.1-2010 5Copying type CNC plano-boring and milling machines with a fixed cross rail - Part 1: Testing of the accuracy GB/T 25658.1-2010 69 Machining test NC copy planer-boring and milling machines with fixed cross rail- Accuracy JB/T 8330.1-1996 6

All Parameters Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 ∕

1 Safety and health Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 5


Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 6

3 Under no-load run test Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 7

4 Load test Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 8


Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 9

23NC vertical drilling machines

6 Origin return test Numerical control vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008 10


No. CNAS L7367


第 21 页共 56 页



7 Geometric accuracy Numerical control vertical drilling machines-Part 1: Testing of the accuracy JB/T 8357.1-2008 4

8 Machining test Numerical control vertical drilling machines-Part 1: Testing of the accuracy JB/T 8357.1-2008 5

All Parameters Bed-type milling machines-Part 2:Specifications JB/T 2548.2-2006 ∕

1 Safety and health Bed-type milling machines-Part 2:Specifications JB/T 2548.2-2006 5

2 Quality of processing and assembly Bed-type milling machines-Part 2:Specifications JB/T 2548.2-2006 6

3 Under no-load run test Bed-type milling machines-Part 2:Specifications JB/T 2548.2-2006 7

4 Load test Bed-type milling machines-Part 2:Specifications JB/T 2548.2-2006 8

Test conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy-Part 1: Machines with horizontal spindle GB/T 3932.1-2006 55 Geometric accuracy Test conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy-Part 2: Machines with Vertical spindle GB/T 3932.2-2006 5Test conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy-Part 1: Machines with horizontal spindle GB/T 3932.1-2006 66 Machining test Test conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy-Part 2: Machines with Vertical spindle GB/T 3932.2-2006 6

24 Bed-type milling machines

7 Parameter Bed-type milling machines-Part 1:types and parameters JB/T 2548.1-2011 ∕

25

Milling machines with table of variable

All Parameters Milling machines with table of variable height-Part 2:Technical conditions JB/T 2800.2-2006 ∕


No. CNAS L7367


第 22 页共 56 页



1 Safety and health Milling machines with table of variable height-Part 2:Technical conditions JB/T 2800.2-2006 5


Milling machines with table of variable height-Part 2:Technical conditions JB/T 2800.2-2006 6

3 Under no-load run test Milling machines with table of variable height-Part 2:Technical conditions JB/T 2800.2-2006 7

4 Load test Milling machines with table of variable height-Part 2:Technical conditions JB/T 2800.2-2006 8

5 Static rigidity Milling machines with table of variable height-Part 3:Static stiffness JB/T 2800.3-2011 /Test conditions of milling machines with table of variable height-Testing of accuracy-Part 2: Machines with horizontal spindle GB/T 3933.2-2002 5Test conditions of milling machines with table of variable height-Testing of accuracy-Part 3: Machines with vertical spindle GB/T 3933.3-2002 56 Geometric accuracy

Testing of the accuracy for Universal rotary head milling machines JB/T 8331-2011 4Test conditions of milling machines with table of variable height-Testing of accuracy-Part 2: Machines with horizontal spindle GB/T 3933.2-2002 6Test conditions of milling machines with table of variable height-Testing of accuracy-Part 3: Machines with vertical spindle GB/T 3933.3-2002 67 Machining test

Testing of the accuracy for Universal rotary head milling machines JB/T 8331-2011 5

height

8 Parameter Milling machines with table of variable height-Part 1:Types and parameters JB/T 2800.1-2011 ∕

All Parameters Portal-type milling machines-Part 2:Technical conditions JB/T 3029.2-2006 ∕

1 Safety and health Portal-type milling machines-Part 2:Technical conditions JB/T 3029.2-2006 526

Portal-type milling machines


Portal-type milling machines-Part 2:Technical conditions JB/T 3029.2-2006 6


No. CNAS L7367


第 23 页共 56 页



3 Under no-load run test Portal-type milling machines-Part 2:Technical conditions JB/T 3029.2-2006 7

4 Load test Portal-type milling machines-Part 2:Technical conditions JB/T 3029.2-2006 8

5 Geometric accuracy Test conditions of Planer milling machines-Test for accuracy-Part 1: Fixed Planer milling machines GB/T 19362.1-2003 6

6 Machining test Test conditions of Planer milling machines-Test for accuracy-Part 1: Fixed Planer milling machines GB/T 19362.1-2003 7


Test conditions of Planer milling machines-Test for accuracy-Part 1: Fixed Planer milling machines GB/T 19362.1-2003 8

8 Parameter Portal-type milling machines-Part 1:Parameters JB/T 3029.1-2006 ∕

All Parameters Universal tool milling machines-Part 2:Technical conditions JB/T 2875.2-2006 ∕

1 Safety and health Universal tool milling machines-Part 2:Technical conditions JB/T 2875.2-2006 5


Universal tool milling machines-Part 2:Technical conditions JB/T 2875.2-2006 6

3 Under no-load run test Universal tool milling machines-Part 2:Technical conditions JB/T 2875.2-2006 7

4 Load test Universal tool milling machines-Part 2:Technical conditions JB/T 2875.2-2006 8

5 Geometric accuracy Universal tool milling machines-Part 3: Testing of the accuracy JB/T 2875.3-2006 4

6 Machining test Universal tool milling machines-Part 3: Testing of the accuracy JB/T 2875.3-2006 5

27Universal tool milling machines

7 Parameter Universal tool milling machines-Part 1: Paramters JB/T 2875.1-2006 ∕

28 Surface milling machines All Parameters Surface milling machines-Part4:Technical conditions JB/T 3313.4-2006 ∕


No. CNAS L7367


第 24 页共 56 页



1 Safety and health Surface milling machines-Part4:Technical conditions JB/T 3313.4-2006 5

2 Quality of processing and assembly Surface milling machines-Part4:Technical conditions JB/T 3313.4-2006 6

3 Under no-load run test Surface milling machines-Part4:Technical conditions JB/T 3313.4-2006 7

4 Load test Surface milling machines-Part4:Technical conditions JB/T 3313.4-2006 8

5 Geometric accuracy Surface milling machines-Part 2：Testing of the accuracy JB/T 3313.2-2011 4

6 Machining test Universal tool milling machines-Part 3: Testing of the accuracy JB/T 2875.3-2006 5

7 Parameter Surface milling machines-Part 1：Types and parameters JB/T 3313.1-2011 ∕

All Parameters Double column milling-planning machines-Part 2:Specifications JB/T 10226.2-2011 ∕

1 Safety and health Double column milling-planning machines-Part 2:Specifications JB/T 10226.2-2011 5


Double column milling-planning machines-Part 2:Specifications JB/T 10226.2-2011 6

3 Under no-load run test Double column milling-planning machines-Part 2:Specifications JB/T 10226.2-2011 7

4 Load test Double column milling-planning machines-Part 2:Specifications JB/T 10226.2-2011 8

5 Geometric accuracy Double column milling-planning machines-Part 1:Testing of the accuracy JB/T 10226.1-2001 5

29 Plano- milling and planning

6 Machining test Double column milling-planning machines-Part 1:Testing of the accuracy JB/T 10226.1-2001 6

30 Radial drilling machine All Parameters Radial drilling machine-Part 2:Specifications JB/T 6335.2-2006 ∕


No. CNAS L7367


第 25 页共 56 页



1 Safety and health Radial drilling machine-Part 2:Specifications JB/T 6335.2-2006 3.3

2 Quality of processing and assembly Radial drilling machine-Part 2:Specifications JB/T 6335.2-2006 3.4

3 Under no-load run test Radial drilling machine-Part 2:Specifications JB/T 6335.2-2006 4.6

4 Load test Radial drilling machine-Part 2:Specifications JB/T 6335.2-2006 4.7

5 Geometric accuracy Radial drilling machines--Testing of the accuracy GB/T 4017-1997 4.1

6 Machining test Radial drilling machines--Testing of the accuracy GB/T 4017-1997 4.2

7 Parameter Radial drilling machines-Parameters JB/T 6335.3-2006 ∕

Geometric accuracy Vertical drilling machines with cross-type table-Testing of the accuracy JB/T 4148-1999 5

1 Machining test Vertical drilling machines with cross-type table-Testing of the accuracy JB/T 4148-1999 631 Vertical drilling

machines

2 Parameter Vertical drilling machines -Parameters JB/T 9903.1-2006 ∕

All Parameters Bench drilling machine-Part 4: Specifications JB/T 5245.4-2006 ∕

1 Safety and health Bench drilling machine-Part 4: Specifications JB/T 5245.4-2006 3.3

2 Quality of processing and assembly Bench drilling machine-Part 4: Specifications JB/T 5245.4-2006 3.4

3 Under no-load run test Bench drilling machine-Part 4: Specifications JB/T 5245.4-2006 4.5

4 Load test Bench drilling machine-Part 4: Specifications JB/T 5245.4-2006 4.6

32 Bench drilling machines

5 Geometric accuracy Bench drilling machines-Part 1: Testing of the accuracy JB/T 5245.1-2006 4


No. CNAS L7367


第 26 页共 56 页



General bench drilling machines-Part 2: Testing of the accuracy JB/T 5245.2-2006 4Bench drilling machine-Part 3: Light type-Testing of the accuracy JB/T 5245.3-2011 4

Bench drilling machine-Part 5： Spindle Specifications JB/T 5245.5-2006 ∕

Bench drilling machines-Part 6：Spindle taper JB/T 5245.6-2006 ∕

Bench drilling machines-Part 1: Testing of the accuracy JB/T 5245.1-2006 56 Machining test General bench drilling machines-Part 2: Testing of the accuracy JB/T 5245.2-

2006 5

7 Parameter Bench drilling machines-Part7： Parameters JB/T 5245.7-2006 ∕

All Parameters Universal radial drilling machine-Specifications JB/T 6336-2006 ∕

1 Safety and health Universal radial drilling machine-Specifications JB/T 6336-2006 3.3

2 Quality of processing and assembly Universal radial drilling machine-Specifications JB/T 6336-2006 3.4

3 Under no-load run test Universal radial drilling machine-Specifications JB/T 6336-2006 4.6

4 Load test Universal radial drilling machine-Specifications JB/T 6336-2006 4.7

Nothingness-bed-type universal radial drilling machines- Testing of the accuracy JB/T 9897-2011 4Traveling universal radial drilling machines-Testing of the accuracy JB/T 9898-2013 4

33Universal radial drilling machines


Portable universal radial drilling machines-Testing of the accuracy JB/T 9899-2014 4


No. CNAS L7367


第 27 页共 56 页



Nothingness-bed-type universal radial drilling machines- Testing of the accuracy JB/T 9897-2011 5Traveling universal radial drilling machines-Testing of the accuracy JB/T 9898-2013 56 Machining test

Portable universal radial drilling machines-Testing of the accuracy JB/T 9899-2014 5

All Parameters Drilling and milling machines-Part 2：Specifications JB/T 7421.2-2006 ∕

1 Safety and health Drilling and milling machines-Part 2：Specifications JB/T 7421.2-2006 3.3

2 Quality of processing and assembly Drilling and milling machines-Part 2：Specifications JB/T 7421.2-2006 3.4

3 Under no-load run test Drilling and milling machines-Part 2：Specifications JB/T 7421.2-2006 4.5

4 Load test Drilling and milling machines-Part 2：Specifications JB/T 7421.2-2006 4.6

5 Geometric accuracy Drilling and milling machines-Part 1：Testing of the accuracy JB/T 7421.1-2006 4

34Drilling and milling machines

6 Machining test Drilling and milling machines-Part 1：Testing of the accuracy JB/T 7421.1-2006 5

All Parameters NC jig boring machines-Specifications JB/T 7416-2007 ∕

1 Safety and health NC jig boring machines-Specifications JB/T 7416-2007 3.3

2 Quality of processing and assembly NC jig boring machines-Specifications JB/T 7416-2007 3.4

3 Under no-load run test NC jig boring machines-Specifications JB/T 7416-2007 4.2

35 NC coordinate boring machines

4 Function test NC jig boring machines-Specifications JB/T 7416-2007 4.3


No. CNAS L7367


第 28 页共 56 页



5 Continuous under no-load run test NC jig boring machines-Specifications JB/T 7416-2007 4.4

6 Load test NC jig boring machines-Specifications JB/T 7416-2007 4.5

7 Minimum setting unit test NC jig boring machines-Specifications JB/T 7416-2007 4.6

8 Origin return test NC jig boring machines-Specifications JB/T 7416-2007 4.7

9 Geometric accuracy NC jig boring machine-Testing of the accuracy GB/T 14660-1993 4

10 Machining test NC jig boring machine-Testing of the accuracy GB/T 14660-1993 5

All Parameters Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 ∕

1 Safety and health Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 3.3


Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 3.4

3 Under no-load run test Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 4.6


Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 4.7

5 Origin return test Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 4.8

6 Load test Boring and milling machines with horizontal spindle-Part 4：Specifications JB/T 4241.4-2006 4.9

36

Boring and milling machines with horizontal spindle

7 Geometric accuracyMachine tools- Test conditions for testing the accuracy of boring and milling machines with horizontal spindle-Part 1：Machines with fixed column and movable table GB/T 5289.1-2008 7


No. CNAS L7367


第 29 页共 56 页



Test conditions for boring and milling machines with horizontal spindle-Te sting of the accuracy-Part 3：Floor type machines with detached stationary work-holding table GB/T 5289.3-2006 5Test conditions for boring and milling machines with horizontal spidle-Testing of the accuracy-Part4：Planer type machines with movable column JB/T 4373-1999 5Boring and milling machines with horizontal spindle-Part 2：Spindle nose JB/T 4241.2-2013 ∕Machine tools- Test conditions for testing the accuracy of boring and milling machines with horizontal spindle-Part 1：Machines with fixed column and movable table GB/T 5289.1-2008 8Test conditions for boring and milling machines with horizontal spindle-Te sting of the accuracy-Part 3：Floor type machines with detached stationary work-holding table GB/T 5289.3-2006 6

8 Machining test

Test conditions for boring and milling machines with horizontal spidle-Testing of the accuracy-Part4：Planer type machines with movable column JB/T 4373-1999 6Machine tools- Test conditions for testing the accuracy of boring and milling machines with horizontal spindle-Part 1：Machines with fixed column and movable table GB/T 5289.1-2008 99 Accuracy of

positioning Test conditions for boring and milling machines with horizontal spindle-Te sting of the accuracy-Part 3：Floor type machines with detached stationary work-holding table GB/T 5289.3-2006 7

10 Parameter Boring and milling machines with horizontal spindle-Part 1：Type and parameters JB/T 4241.1-2011 ∕

All Parameters Jig boring machines-Part 2：Specifications JB/T 2254.2-2007 ∕37 Coordinate

boring machine 1 Safety and health Jig boring machines-Part 2：Specifications JB/T 2254.2-2007 3.3


No. CNAS L7367


第 30 页共 56 页



Jig boring machines rotary table-Part 2：Specifications JB/T 2255.2-2013 3.2

Jig boring machines-Part 2：Specifications JB/T 2254.2-2007 3.42 Quality of processing

and assembly Jig boring machines rotary table-Part 2：Specifications JB/T 2255.2-2013 3.3

Jig boring machines-Part 2：Specifications JB/T 2254.2-2007 4.23 Under no-load run test

Jig boring machines rotary table-Part 2：Specifications JB/T 2255.2-2013 4.1

4 Load test Jig boring machines-Part 2：Specifications JB/T 2254.2-2007 4.3

Jig boring machines-Part 1：Testing of the accuracy JB/T 2254.1-2011 45 Geometric accuracy

Jig boring rotary table-Testing of the accuracy JB/T 2255.1-1999 4

6 Machining test Jig boring machines-Part 1：Testing of the accuracy JB/T 2254.1-2011 5

7 Parameter Jig boring machines-Part 4：Types and parameters JB/T 2254.4-2013 ∕

All Parameters Specification for floor type boring and milling ＆ boring machines JB/T 8490-2008 ∕

1 Safety and health Specification for floor type boring and milling ＆ boring machines JB/T 8490-2008 5


Specification for floor type boring and milling ＆ boring machines JB/T 8490-2008 6

3 Under no-load run test Specification for floor type boring and milling ＆ boring machines JB/T 8490-2008 7

38

Floor type boring and milling machines

4 Load test Specification for floor type boring and milling ＆ boring machines JB/T 8490-2008 8


No. CNAS L7367


第 31 页共 56 页



Floor type milling & boring machine spindle end-Part 1：Boring shaft end dimension JB/T 4366.1-2011 ∕Floor type milling & boring machine spindle end-Part 2：Milling shaft end dimension JB/T 4366.2-2011 ∕5 Geometric accuracy

Floor type milling & boring machine spindle end-Part 3：Key dimension of spindle end surface JB/T 4366.3-2011 ∕

6 Parameter Floor boring machines and floor milling & boring machines-Part 1：Types and parameters JB/T 4367.1-2011 ∕

All Parameters Deephole drilling & boring machines-Part 2: Technical conditions JB/T 6088.2-2006 ∕

1 Safety and health Deephole drilling & boring machines-Part 2: Technical conditions JB/T 6088.2-2006 5


Deephole drilling & boring machines-Part 2: Technical conditions JB/T 6088.2-2006 6

3 Under no-load run test Deephole drilling & boring machines-Part 2: Technical conditions JB/T 6088.2-2006 7

4 Load test Deephole drilling & boring machines-Part 2: Technical conditions JB/T 6088.2-2006 8

5 Geometric accuracy Deephole drilling & boring machines-Part 1: Testing of the accuracy JB/T 6088.1-2006 5

39Deephole drilling ＆boring machines

6 Machining test Deephole drilling & boring machines-Part 1: Testing of the accuracy JB/T 6088.1-2006 6

All Parameters Heavy duty deephole drilling and boring machines-Part 2: Specifications JB/T 8332.2-2006 ∕

1 Safety and health Heavy duty deephole drilling and boring machines-Part 2: Specifications JB/T 8332.2-2006 5


Heavy duty deephole drilling and boring machines-Part 2: Specifications JB/T 8332.2-2006 6

40

Heavy-duty deep-hole drilling ＆boring machines

3 Under no-load run test Heavy duty deephole drilling and boring machines-Part 2: Specifications JB/T 8332.2-2006 7


No. CNAS L7367


第 32 页共 56 页



4 Load test Heavy duty deephole drilling and boring machines-Part 2: Specifications JB/T 8332.2-2006 8

5 Geometric accuracy Heavy duty deep hole drilling & boring machines-Part 1：Testing of the accuracy JB/T 8332.1-2011 6

6 Machining test Heavy duty deep hole drilling & boring machines-Part 1：Testing of the accuracy JB/T 8332.1-2011 7

7 Parameter Heavy duty deephole drilling and boring machines-Part 3: Type and Parameters JB/T 8332.3-2011 ∕

All Parameters Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2：Specifications JB/T 3382.2-2014 ∕


Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2：Specifications JB/T 3382.2-2014 6

2 Under no-load run test Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2：Specifications JB/T 3382.2-2014 7

3 Load test Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2：Specifications JB/T 3382.2-2014 8

4 Grinding rate test Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2：Specifications JB/T 3382.2-2014 10

5 Safety and health Surface grinding machines with horizontal grinding wheel spindle and reciprocating table -Safeguarding specifications GB 24385-2009 ∕Surface grinding machines with horizontal grinding wheel spindle and reciprocating table -Testing of the accuracy-Part 1： Machines with a table surface length of up to 1600mm GB/T 4022.1-2007 5Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 3：Precision machines-Testing of the accuracy JB/T 3382.3-2014 4

41

Surface grinding machines with horizontal spindles and rectangular table


Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 4：High accuracy machines-Testing of the accuracy JB/T 3382.4-2014 4


No. CNAS L7367


第 33 页共 56 页



Surface grinding machines with horizontal grinding wheel spindle and reciprocating table -Testing of the accuracy-Part 1： Machines with a table surface length of up to 1600mm GB/T 4022.1-2007 6Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 3：Precision machines-Testing of the accuracy JB/T 3382.3-2014 5

7 Machining test

Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 4：High accuracy machines-Testing of the accuracy JB/T 3382.4-2014 5

8 Parameter Surface grinding machines with horizontal spindles and rectangular table-Parameters JB/T 3382.3-2006 ∕

All Parameters Internal cylindrical grinding machineswith spindle-Part 2：Specification JB/T 9906.2-2014 ∕

1 Safety and health Internal cylindrical grinding machineswith spindle-Part 2：Specification JB/T 9906.2-2014 5


Internal cylindrical grinding machineswith spindle-Part 2：Specification JB/T 9906.2-2014 6

3 Under no-load run test Internal cylindrical grinding machineswith spindle-Part 2：Specification JB/T 9906.2-2014 7

4 Load test Internal cylindrical grinding machineswith spindle-Part 2：Specification JB/T 9906.2-2014 8


Internal cylindrical grinding machineswith spindle-Part 2：Specification JB/T 9906.2-2014 10

6 Geometric accuracy Internal cylindrical grinding machines with horizontal spindle-Testing of the accuracy GB/T 4682-2007 5

7 Machining test Internal cylindrical grinding machines with horizontal spindle-Testing of the accuracy GB/T 4682-2007 6

42

Internal cylindrical grinding machines


Internal cylindrical grinding machines with horizontal spindle-Testing of the accuracy GB/T 4682-2007 7


No. CNAS L7367


第 34 页共 56 页



9 Parameter Internal cylindrical Grinding machines-Parameters JB/T 9906.3-2006 ∕

All Parameters Cylindrical grinder-Part 2：Specifications JB/T 7418.2-2007 ∕

Cylindrical grinder-Part 2：Specifications JB/T 7418.2-2007 5

External cylindrical grinding machines-Safeguarding specifications GB 24384-2009 ∕1 Safety and health

Specifications of grinding-wheel guard for safety JB 4029-2000 ∕

2 Quality of processing and assembly Cylindrical grinder-Part 2：Specifications JB/T 7418.2-2007 6

3 Under no-load run test Cylindrical grinder-Part 2：Specifications JB/T 7418.2-2007 7

4 Load test Cylindrical grinder-Part 2：Specifications JB/T 7418.2-2007 8

5 Minimum setting unit test Cylindrical grinder-Part 2：Specifications JB/T 7418.2-2007 10

External cylindrical grinding machines-Testing of the accuracy GB/T 4685-2007 56 Geometric accuracy External cylindrical grinding machines-Part 3:High accuracy machines-Testing of the accuracy JB/T 7418.3-2014 5External cylindrical grinding machines-Testing of the accuracy GB/T 4685-2007 67 Machining test External cylindrical grinding machines-Part 3:High accuracy machines-Testing of the accuracy JB/T 7418.3-2014 6External cylindrical grinding machines-Testing of the accuracy GB/T 4685-2007 7

43

External cylindrical grinding machines

8 Accuracy of positioning External cylindrical grinding machines-Part 3:High accuracy machines-

Testing of the accuracy JB/T 7418.3-2014 7


No. CNAS L7367


第 35 页共 56 页



9 Parameter External cylindrical grinding machines-Parameters JB/T 7418.1-2006 ∕

All Parameters Surface grinding machines with vertical spindle and reciprocating table-SpecificationJB/T 4183.2-1999 JB/T 4183.2-2014 ∕

1 Safety and health Surface grinding machines with vertical spindle and reciprocating table-SpecificationJB/T 4183.2-1999 JB/T 4183.2-2014 5


Surface grinding machines with vertical spindle and reciprocating table-SpecificationJB/T 4183.2-1999 JB/T 4183.2-2014 6

3 Under no-load run test Surface grinding machines with vertical spindle and reciprocating table-SpecificationJB/T 4183.2-1999 JB/T 4183.2-2014 7

4 Load test Surface grinding machines with vertical spindle and reciprocating table-SpecificationJB/T 4183.2-1999 JB/T 4183.2-2014 8

5 Grinding rate test Surface grinding machines with vertical spindle and reciprocating table-SpecificationJB/T 4183.2-1999 JB/T 4183.2-2014 10

6 Geometric accuracy Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Testing of the accuracy GB/T 6476-2007 4

7 Machining test Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Testing of the accuracy GB/T 6476-2007 5

44Surface grinding machines with vertical spindle

8 Parameter Surface grinding machines with vertical spindles and rectangular table-Parameters JB/T 4183.3-2006 ∕

All Parameters Universal tool and cutter grinding machines-Part 3：Specifications JB/T 3875.3-2007 ∕

1 Safety and health Universal tool and cutter grinding machines-Part 3：Specifications JB/T 3875.3-2007 5


Universal tool and cutter grinding machines-Part 3：Specifications JB/T 3875.3-2007 6

3 Under no-load run test Universal tool and cutter grinding machines-Part 3：Specifications JB/T 3875.3-2007 7

45

Universal tool ＆cutter grinding machines

4 Load test Universal tool and cutter grinding machines-Part 3：Specifications JB/T 3875.3-2007 8


No. CNAS L7367


第 36 页共 56 页



5 Geometric accuracy Universal tool and cutter grinding machines-Part 2:Testing of the accuracy JB/T 3875.2-1999 4

6 Machining test Universal tool and cutter grinding machines-Part 2:Testing of the accuracy JB/T 3875.2-1999 5

7 Parameter UniversalTool & cutter grinding machines-Part 1: Types and parameters JB/T 3875.1-2014 ∕

All Parameters Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 ∕

1 Safety and health Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 3.3

2 Quality of processing and assembly Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 3.4,、3.5

3 Under no-load run test Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 4.6

4 Load test Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 4.7

5 Minimum setting unit test Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 4.8

6 Origin return test Jig grinding machines-Part 3: Specifications JB/T 6091.3-2007 4.9

7 Geometric accuracy Jig grinding machines-Part 2：Testing of the accuracy JB/T 6091.2-2007 4

8 Accuracy of positioning Jig grinding machines-Part 2：Testing of the accuracy JB/T 6091.2-2007 5

9 Machining test Jig grinding machines-Part 2：Testing of the accuracy JB/T 6091.2-2007 6

46 Jig grinding machines

10 Parameter Jig grinding machines-Part 1：Parameters JB/T 6091.1-2007 ∕

47

Surface grinding machines with horizontal

All Parameters Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 ∕


No. CNAS L7367


第 37 页共 56 页



1 Safety and health Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 5


Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 6

3 Under no-load run test Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 7

4 Load test Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 8

5 Grinding rate test Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 10

6Grinding test of cocave convex specimen

Surface grinding machines with horizontal wheel spindle and rotary table-Part 2：Specifications JB/T 9908.2-2014 11

Surface grinding machines with horizontal spindle and rotary table-Testing of the accuracy JB/T 9908.3-1999 5

7 Geometric accuracy Surface grinding machines with high precision horizontal wheel spindle and rotary table-Part 4:High precision tools -Testing of the accuracy JB/T 9908.4-2014 4Surface grinding machines with horizontal spindle and rotary table-Testing of the accuracy JB/T 9908.3-1999 6

8 Machining test Surface grinding machines with high precision horizontal wheel spindle and rotary table-Part 4:High precision tools -Testing of the accuracy JB/T 9908.4-2014 5

spindles and rotary table

9 Parameter Surface grinding machines with horizontal wheel spindle and rotary table-Part 1:Types and parameters JB/T 9908.1-2014 ∕

All Parameters Surface grinding machines with vertical wheel spindle and rotary table-Part 3：Specifications JB/T 9909.3-2014 ∕

48Surface grinding machines with vertical spindles 1 Safety and health Surface grinding machines with vertical wheel spindle and rotary table-Part

3：Specifications JB/T 9909.3-2014 5


No. CNAS L7367


第 38 页共 56 页




Surface grinding machines with vertical wheel spindle and rotary table-Part 3：Specifications JB/T 9909.3-2014 6

3 Under no-load run test Surface grinding machines with vertical wheel spindle and rotary table-Part 3：Specifications JB/T 9909.3-2014 7

4 Load test Surface grinding machines with vertical wheel spindle and rotary table-Part 3：Specifications JB/T 9909.3-2014 8

5 Grinding rate test Surface grinding machines with vertical wheel spindle and rotary table-Part 3：Specifications JB/T 9909.3-2014 10

6 Geometric accuracy Surface grinding machines with vertical spindle and rotary table-Testing of the accuracy JB/T 9909.2-1999 5

7 Machining test Surface grinding machines with vertical spindle and rotary table-Testing of the accuracy JB/T 9909.2-1999 6

8 Parameter Surface grinding machines with vertical spindle and rotary table-Parameters JB/T 9909.4-2006 ∕

Ⅱ Non-traditional machines

1Non-traditional machine tools (parameter)

1 Safety protection Electro-discharge machines-Technical requirements for safeguarding GB 13567-1998 ∕

2

Wire electric discharge machines(Reciprocating traveling type)

Part of Parameters Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 ∕

Except for：power supply adaptability test、high tempature running test


No. CNAS L7367


第 39 页共 56 页



1 Accessories and tools Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 4

2 Safety protection Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 5


Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 6

4 Running test Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 7

5 Mark and Random technical documents

Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 9

6 Packing Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 10Wire electrical-discharge machines(Reciprocating traveling type)-Testing of the accuracy GB/T 7926-2005 57 Geometric accuracy NC reciprocating traveling type wire electrical-discharge machines - Testing of the accuracy GB/T 7926-2015 5Wire electrical-discharge machines(Reciprocating traveling type)-Testing of the accuracy GB/T 7926-2005 68 Accuracy of

positioning NC reciprocating traveling type wire electrical-discharge machines - Testing of the accuracy GB/T 7926-2015 6Wire electrical-discharge machines(Reciprocating traveling type)-Testing of the accuracy GB/T 7926-2005 79 Machining test NC reciprocating traveling type wire electrical-discharge machines - Testing of the accuracy GB/T 7926-2015 7

3

NC reciprocating traveling wire electrical-discharge machines with

Part of Parameters NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 ∕

Except for：power supply adaptability test


No. CNAS L7367


第 40 页共 56 页



、high tempature running test

1 Accessories and tools NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 4

2 Satety protection NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 5


NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 6

4 Running test NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 7


NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 9

6 Packing NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 2：Technical requirements JB/T 11999.2-2014 10

7 Geometric accuracy NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 1：Testing of accuracy JB/T 11999.1-2014 5


NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 1：Testing of accuracy JB/T 11999.1-2014 6

repeated cut function

9 Machining test NC reciprocating traveling wire electrical-discharge machines with repeated cut function - Part 1：Testing of accuracy JB/T 11999.1-2014 7

4

Wire electric discharge machines(unidirectional traveling type)

Part of Parameters Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 ∕

Except for：power supply adaptability test、high


No. CNAS L7367


第 41 页共 56 页



tempature running test

1 Accessories and tools Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 4

2 satety protection Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 5


Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 6

4 Running test Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 7


Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 9

6 Packing Wire electrical-discharge machines（unidirectional travelling type）-Technical requirements JB/T 5544-2012 10

7 Geometric accuracy Wire electrical-discharge machines(Unidirectional traveling type)-Testing of the accuracy GB/T 19361-2003 5


Wire electrical-discharge machines(Unidirectional traveling type)-Testing of the accuracy GB/T 19361-2003 6

9 Machining test Wire electrical-discharge machines(Unidirectional traveling type)-Testing of the accuracy GB/T 19361-2003 7

10 Circular tests Wire electrical-discharge machines(Unidirectional traveling type)-Testing of the accuracy GB/T 19361-2003 8

5

Numerical control micro-hole drilling electro-discharge machines

Part of Parameters Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 ∕

Except for：power supply adaptability test


No. CNAS L7367


第 42 页共 56 页



、high tempature running test

1 Accessories and tools Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 4

2 Satety protection Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 5


Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 6

4 Running test Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 7


Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 9

6 Packing Numerical control micro-hole drilling electro-discharge machines-Part 2:Technical requirements JB/T 11998.2-2014 10

7 Geometric accuracy Numerical control micro-hole drilling electro-discharge machines-Part 1:Testing of accuracy JB/T 11998.1-2014 5


Numerical control micro-hole drilling electro-discharge machines-Part 1:Testing of accuracy JB/T 11998.1-2014 6

9 Machining test Numerical control micro-hole drilling electro-discharge machines-Part 1:Testing of accuracy JB/T 11998.1-2014 7

6

High speed electro-discharge small hole drilling machines

Part of Parameters Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 ∕

Except for：power supply adaptability test、high tempature


No. CNAS L7367


第 43 页共 56 页



running test

1 Accessories and tools Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 3

2 Satety protection Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 4


Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 5

4 Running test Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 6


Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 8

6 Packing Small hole high speed drilling electro-discharge machines-Technical requirements JB/T 10330-2012 9

7 Geometric accuracy Small hole high speed drilling electro-discharge machines-Part 1: Terminology and testing of accuracy GB/T 23480.1-2009 5


Small hole high speed drilling electro-discharge machines-Part 1: Terminology and testing of accuracy GB/T 23480.1-2009 6

9 Machining test Small hole high speed drilling electro-discharge machines-Part 1: Terminology and testing of accuracy GB/T 23480.1-2009 7

7 Spark-erosion sink machines Part of Parameters Numerical control sinking electro-discharge machines-Technical requirements

JB/T 11273-2012 ∕

Except for：power supply adaptability test、high tempature running test


No. CNAS L7367


第 44 页共 56 页



Numerical control sinking electro-discharge machines-Technical requirements JB/T 11273-2012 41 Accessories and tools Sinking electro-discharge machines-Technical requirements JB/T 4105-2010 4Numerical control sinking electro-discharge machines-Technical requirements JB/T 11273-2012 52 Safety protection Sinking electro-discharge machines-Technical requirements JB/T 4105-2010 5Numerical control sinking electro-discharge machines-Technical requirements JB/T 11273-2012 63 Quality of processing

and assembly Sinking electro-discharge machines-Technical requirements JB/T 4105-2010 6Numerical control sinking electro-discharge machines-Technical requirements JB/T 11273-2012 74 Running test Sinking electro-discharge machines-Technical requirements JB/T 4105-2010 7Numerical control sinking electro-discharge machines-Technical requirements JB/T 11273-2012 95 Mark and Random

technical documents Sinking electro-discharge machines-Technical requirements JB/T 4105-2010 9Numerical control sinking electro-discharge machines-Technical requirements JB/T 11273-2012 106 Packing Sinking electro-discharge machines-Technical requirements JB/T 4105-2010 10Die sinking electro-discharge machines(EDM)-Testing of accuracy-Part 1:Single column machines (cross slide table type and fixed table type) GB/T 5291.1-2001 57 Geometric accuracy Die sinking electro-discharge machines(EDM)-Testin of accuracy-Part 2:Two column machines(Slide-head type and cross-slide table type) GB/T 5291.2-2003 5


No. CNAS L7367


第 45 页共 56 页



Die sinking electro-discharge machines(EDM)-Testing of accuracy-Part 1:Single column machines (cross slide table type and fixed table type) GB/T 5291.1-2001 68 Accuracy of

positioning Die sinking electro-discharge machines(EDM)-Testin of accuracy-Part 2:Two column machines(Slide-head type and cross-slide table type) GB/T 5291.2-2003 6Die sinking electro-discharge machines(EDM)-Testing of accuracy-Part 1:Single column machines (cross slide table type and fixed table type) GB/T 5291.1-2001 79 Machining test Die sinking electro-discharge machines(EDM)-Testin of accuracy-Part 2:Two column machines(Slide-head type and cross-slide table type) GB/T 5291.2-2003 7

Ⅲ Functional componentsHigh-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 41 Safety and health High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 4High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.52 Outlet and marking High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.5High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.63 Appearance High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.6

4 Taper hole test High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.8

1 High-frequency spindle

5 Mating surfaces test High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.9


No. CNAS L7367


第 46 页共 56 页



High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.10High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.106 Sealing performance High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.11High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.127 Insulation resistance High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.13High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.138 Turn to turn insulation High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.14High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.149 High-voltage test High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.15High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.1510 Maximum output

torque High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.16High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.1611 Temperature rise High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.17

12 Broach force High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.17

13 Action test High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.18


No. CNAS L7367


第 47 页共 56 页



High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.1914 Vibration High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.18High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.2015 Sound pressure levels High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.19High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.2116 Static rigidity High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.20High-frequency spindle-Part 2:Specifications for high-frequency spindle used in machining centres JB/T 10801.2-2007 5.2217 Geometric accuracy High-frequency spindle-Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines JB/T 10801.3-2007 5.21

Mechanical spindle unit for machining centre JB/T 11657-2013 5.21 Appearance Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 5.2

Mechanical spindle unit for machining centre JB/T 11657-2013 5.32 Temperature rise Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 5.3

Mechanical spindle unit for machining centre JB/T 11657-2013 5.43 Sound pressure levels Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 5.4

2 Mechanical spindle

4 Vibration Mechanical spindle unit for machining centre JB/T 11657-2013 5.5


No. CNAS L7367


第 48 页共 56 页



Mechanical spindle unit for numerically controlled turning machines JB/T 11658-2013 5.5

Mechanical spindle unit for machining centre JB/T 11657-2013 5.65 Maximum speed Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 5.6

Mechanical spindle unit for machining centre JB/T 11657-2013 5.76 Static rigidity Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 5.7

Mechanical spindle unit for machining centre JB/T 11657-2013 5.87 Broach force Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 5.8

Mechanical spindle unit for machining centre JB/T 11657-2013 6.38 Install connection

dimensions Mechanical spindle unit for numerically controlled turning machines JB/T 11658-2013 6.3

Mechanical spindle unit for machining centre JB/T 11657-2013 79 Geometric accuracy Mechanical spindle unit for numerically controlled turning machines JB/T

11658-2013 7

3 numerical control system 1 climate environment

conditionsNumerical control system of industrial machines - Part 1:General requirments GB/T 29482.1-2013 4.1

Temperature range: -20℃~100℃；Except for：Change of temperature


No. CNAS L7367


第 49 页共 56 页



Environmental testing for electric and electronic products - Part2: Test methods - Tests A: Cold GB/T 2423.1-2008 /Environmental testing for electric and electronic products - Part2: Test methods - Tests B: Dry heat GB/T 2423.2-2008 /Environmental testing for electric and electronic products - Part2: Test methods - Tests Db: Damp heat,cyclic(12h+12h cycle) GB/T 2423.4-2008 /

Numerical control system of industrial machines - Part 1:General requirments GB/T 29482.1-2013 4.2

except for: free fall test

Environmental testing for electric and electronic products - Part2: Test methods - Tests Fc: Vibration(sinusoidal) GB/T 2423.10-2008 /

2mechanical environment conditions

Environmental testing for electric and electronic products - Part2: Test methods - Tests Ea: Shock GB/T 2423.5-1999 /

3 power source conditions

Numerical control system of industrial machines - Part 1:General requirments GB/T 29482.1-2013 4.3

Except for：Voltage harmonic

4 Design and Manufacture

Numerical control system of industrial machines - Part 1:General requirments GB/T 29482.1-2013 5

5 Function Numerical control system of industrial machines - Part 1:General requirments GB/T 29482.1-2013 6

Except for：interface impedance

6Safety and electromagnetic compatibility


Except for: electromagnetic compatibility、fire protection and


No. CNAS L7367


第 50 页共 56 页



nonmetallic materials fire resistance

7 Product accompanying file


8 Package and transportation


Ⅳ Industrial robotsRobots for industrial environments-Safety requirements-Part 1:Robot GB 11291.1-2011 /Robots and robotic devices-Safety requirements for industrial robots-Part 2:Robot systems and integration GB 11291.2-2013 /1 Safety and health

Industrial robot-Safety implementation specification GB/T 20867-2007 /

Industrial robot-Acceptance rules JB/T 8896-1999 5.22 Appearance and

structure Industrial robot-Product acceptance implementation specification JB/T 10825-2008 6.1

Industrial robot-Acceptance rules JB/T 8896-1999 5.33 Function test Industrial robot-Product acceptance implementation specification JB/T 10825-

2008 6.2、6.3、6.4

Industrial robot-Acceptance rules JB/T 8896-1999 5.4.14 Movement range of

each axis Industrial robot-Product acceptance implementation specification JB/T 10825-2008 6.5

1Industrial robots(parameter)

5 Workspace Industrial robot-Acceptance rules JB/T 8896-1999 5.4.2


No. CNAS L7367


第 51 页共 56 页



Industrial robot-Product acceptance implementation specification JB/T 10825-2008 6.6

Industrial robot-Acceptance rules JB/T 8896-1999 5.4.36 Maximum single shaft

speed Industrial robot-Product acceptance implementation specification JB/T 10825-2008 6.7

Industrial robot-Acceptance rules JB/T 8896-1999 5.4.4

Industrial robot-Product acceptance implementation specification JB/T 10825-2008 6.8Industrial robots-Performance criteria and related test methods GB/T 12642-2013 7

7 Pose characteristics

Industrial robot-Detailed implementation specification for performance and related test GB/T 20868-2007 10.1、10.2、10.3、10.3、10.4、10.5、10.6



8 Trajectory characteristics

Industrial robot-Detailed implementation specification for performance and related test GB/T 20868-2007 10.7、10.8、10.9



9 Minimum positioning time

Industrial robot-Detailed implementation specification for performance and


No. CNAS L7367


第 52 页共 56 页



related test GB/T 20868-2007 10.11


Industrial robot-Product acceptance implementation specification JB/T 10825-2008 6.1110 Static compliance

Industrial robots-Performance criteria and related test methods GB/T 12642-2013 10


The continuity of the protective bonding circuit test Industrial robot-Product acceptance implementation specification JB/T 10825-

2008 6.12

Industrial robot-Acceptance rules JB/T 8896-1999 5.5.212 Insulation resistance Industrial robot-Product acceptance implementation specification JB/T 10825-

2008 6.13

Industrial robot-Acceptance rules JB/T 8896-1999 5.5.313 High-voltage test Industrial robot-Product acceptance implementation specification JB/T 10825-

2008 6.14

Industrial robot-Acceptance rules JB/T 8896-1999 5.614 Continuous operation Industrial robot-Product acceptance implementation specification JB/T 10825-

2008 6.15

Industrial robot-Acceptance rules JB/T 8896-1999 5.715 Sound pressure levels Industrial robot-Product acceptance implementation specification JB/T 10825-

2008 6.16

16 Swing deviation Industrial robots-Performance criteria and related test methods GB/T 12642-2013 11


No. CNAS L7367


第 53 页共 56 页



Industrial robot-Detailed implementation specification for performance and related test GB/T 20868-2007 10.10

Part of Parameters General specifications of spot-Welding robots GB/T 14283-2008 /

Except for： EMC、Power source adaptability test、Climatic environment adaptability test、Vibration test

1 Appearance and structure General specifications of spot-Welding robots GB/T 14283-2008 6.2

2 Function test General specifications of spot-Welding robots GB/T 14283-2008 6.3

3 Hydraulic system General specifications of spot-Welding robots GB/T 14283-2008 6.4

4 Movement range of each axis General specifications of spot-Welding robots GB/T 14283-2008 6.5.1

5 Workspace General specifications of spot-Welding robots GB/T 14283-2008 6.5.2

6 Maximum single shaft speed General specifications of spot-Welding robots GB/T 14283-2008 6.5.3

2 Spot-Welding robots

7 The number of spot runs per minute General specifications of spot-Welding robots GB/T 14283-2008 6.5.4


No. CNAS L7367


第 54 页共 56 页



8 Pose repeatability General specifications of spot-Welding robots GB/T 14283-2008 6.5.5


General specifications of spot-Welding robots GB/T 14283-2008 6.6.1

10 Insulation resistance General specifications of spot-Welding robots GB/T 14283-2008 6.6.2

11 High-voltage test General specifications of spot-Welding robots GB/T 14283-2008 6.6.3

12 Continuous operation General specifications of spot-Welding robots GB/T 14283-2008 6.7

13 Process operation test General specifications of spot-Welding robots GB/T 14283-2008 6.8

14 Sound pressure levels General specifications of spot-Welding robots GB/T 14283-2008 6.9

Part of Parameters General specifications of arc welding robots GB/T 20723-2006 /

Except for： EMC、Power source adaptability test、Climatic environment adaptability test、Vibration test

3 Arc welding robots

1 Appearance and structure General specifications of arc welding robots GB/T 20723-2006 6.2


No. CNAS L7367


第 55 页共 56 页



2 Function test General specifications of arc welding robots GB/T 20723-2006 6.3

3 Movement range of each axis General specifications of arc welding robots GB/T 20723-2006 6.4.1

4 Workspace General specifications of arc welding robots GB/T 20723-2006 6.4.2

5 Maximum single shaft speed General specifications of arc welding robots GB/T 20723-2006 6.4.3

6 Working speed range General specifications of arc welding robots GB/T 20723-2006 6.4.4

7 Pose repeatability General specifications of arc welding robots GB/T 20723-2006 6.4.5

8 Position overshoot General specifications of arc welding robots GB/T 20723-2006 6.4.6

9 Pose repetitive drift General specifications of arc welding robots GB/T 20723-2006 6.4.7

10 Track repeatability General specifications of arc welding robots GB/T 20723-2006 6.4.8

11 Track speed repeatability General specifications of arc welding robots GB/T 20723-2006 6.4.9

12 Trajectory speed fluctuation General specifications of arc welding robots GB/T 20723-2006 6.4.10

13 Swing deviation General specifications of arc welding robots GB/T 20723-2006 6.4.11


General specifications of arc welding robots GB/T 20723-2006 6.5.1

15 Insulation resistance General specifications of arc welding robots GB/T 20723-2006 6.5.2

16 High-voltage test General specifications of arc welding robots GB/T 20723-2006 6.5.3


No. CNAS L7367


第 56 页共 56 页



17 Sound pressure levels General specifications of arc welding robots GB/T 20723-2006 6.6

18 Continuous operation General specifications of arc welding robots GB/T 20723-2006 6.7

19 Process operation test General specifications of arc welding robots GB/T 20723-2006 6.8

Name: Machine Tools Inspection and Evaluation Center ...

Documents

Transcript of Name: Machine Tools Inspection and Evaluation Center ...