Nace Catalogue
Transcript of Nace Catalogue
MaterialRequirements
RecommendedPractices
Test Methods
Main Menu
How to Find aStandard
Standards onCD ROM
Material Requirements
MR0174-2001 ......................... Recommendations for Selecting Inhibitors for Use as Sucker-RodThread Lubricants, Item No. 21300
NACE MR0175/ ISO 15156 .............................. Materials for use in H2S-containing environments in oil and gas
production, Item No. 21307
MR0176-2000 ......................... Metallic Materials for Sucker-Rod Pumps for Corrosive OilfieldEnvironments, Item No. 21303
MR0103-2005 .......................... Materials Resistant to Sulfide Stress Cracking in Corrosive PetroleumRefining Environments, Item No. 21305
Recommended Practices
NACE No. 1/ SSPC-SP 5 .............................. White Metal Blast Cleaning (RP0494-2000), Item No. 21065
NACE No. 2/ SSPC-SP 10 ............................ Near-White Metal Blast Cleaning (RP0594-2000), Item No. 21066
NACE No. 3/ SSPC-SP 6 .............................. Commercial Blast Cleaning (RP0694-2000), Item No. 21067
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
NACE No. 4/ SSPC-SP 7 .............................. Brush-Off Blast Cleaning (RP0794-2000), Item No. 21068
NACE No. 5/ SSPC-SP 12 ............................ Surface Preparation and Cleaning of Metals by Waterjetting Prior to
Recoating (RP0595-2002), Item No. 21076
NACE No. 6/ SSPC-SP 13 ............................ Surface Preparation of Concrete (RP0397-2003), Item No. 21082
NACE No. 8/ SSPC-SP 14 ............................ Industrial Blast Cleaning (RP0299-99), Item No. 21088
NACE No. 10/ SSPC-PA 6 .............................. Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of
Carbon Steel Aboveground Storage Tanks (RP0202-2002), Item No.21093
NACE No. 11/ SSPC-PA 8 .............................. Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels
(RP0103-2003), Item No. 21099
NACE No. 12/ AWS C2.23M/ SSPC-CS 23.00 ...................... Specification for the Application of Thermal Spray Coatings (Metallizing)
of Aluminum, Zinc, and Their Alloys and Composites for the CorrosionProtection of Steel (RP0203-2003), Item No. 21100
Main Menu
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
Main Menu
RP0169-2002 .......................... Control of External Corrosion on Underground or Submerged MetallicPiping Systems, Item No. 21001
RP0170-2004 .......................... Protection of Austenitic Stainless Steels and Other Austenitic Alloysfrom Polythionic Acid Stress Corrosion Cracking During Shutdownof Refinery Equipment, Item No. 21002
RP0472-2000 .......................... Methods and Controls to Prevent In-Service Environmental Crackingof Carbon Steel Weldments in Corrosive Petroleum RefiningEnvironments, Item No. 21006
RP0572-2001 .......................... Design, Installation, Operation, and Maintenance of Impressed CurrentDeep Groundbeds, Item No. 21007
RP0273-2001 .......................... Handling and Proper Usage of Inhibited Oilfield Acids, Item No. 21009
RP0274-2004 .......................... High-Voltage Electrical Inspection of Pipeline Coatings, Item No. 21010
RP0375-99 .............................. Wax Coating Systems for Underground Piping Systems, Item No.21013
RP0475-98 .............................. Selection of Metallic Materials to Be Used in All Phases of WaterHandling for Injection Into Oil-Bearing Formations, Item No. 21014
RP0575-2001 .......................... Internal Cathodic Protection Systems in Oil-Treating Vessels, ItemNo. 21015
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
RP0775-99 .............................. Preparation, Installation, Analysis, and Interpretation of CorrosionCoupons in Oilfield Operations, Item No. 21017
RP0176-2003 ........................... Corrosion Control of Steel Fixed Offshore Platforms Associated withPetroleum Production, Item No. 21018
RP0177-2000 .......................... Mitigation of Alternating Current and Lightning Effects on MetallicStructures and Corrosion Control Systems, Item No. 21021
RP0178-2003 .......................... Fabrication Details, Surface Finish Requirements, and Proper DesignConsiderations for Tanks and Vessels to Be Lined for ImmersionService, Item No. 21022
RP0180-2001 .......................... Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers, ItemNo. 21024
RP0281-2004 .......................... Method for Conducting Coating (Paint) Panel Evaluation Testing inAtmospheric Exposures, Item No. 21026
RP0185-96 .............................. Extruded Polyolefin Resin Coating Systems with Soft Adhesives forUnderground or Submerged Pipe, Item No. 21029
RP0285-2002 .......................... Corrosion Control of Underground Storage Tank Systems by CathodicProtection, Item No. 21030
RP0186-2001 .......................... Application of Cathodic Protection for External Surfaces of Steel WellCasings, Item No. 21031
Main Menu
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
RP0286-2002 .......................... Electrical Isolation of Cathodically Protected Pipelines, Item No. 21032
RP0386-2003 .......................... Application of a Coating System to Interior Surfaces of Covered SteelHopper Rail Cars in Plastic, Food, and Chemical Service, Item No.21033
RP0187-2005 .......................... Design Considerations for Corrosion Control of Reinforcing Steel inConcrete, Item No. 21034
RP0287-2002 .......................... Field Measurement of Surface Profile of Abrasive Blast-Cleaned SteelSurfaces Using a Replica Tape, Item No. 21035
RP0387-99 .............................. Metallurgical and Inspection Requirements for Cast Galvanic Anodesfor Offshore Applications, Item No. 21036
RP0487-2000 .......................... Considerations in the Selection and Evaluation of Rust Preventivesand Vapor Corrosion Inhibitors for Interim (Temporary) CorrosionProtection, Item No. 21037
RP0188-99 .............................. Discontinuity (Holiday) Testing of New Protective Coatings onConductive Substrates, Item No. 21038
RP0288-2004 .......................... Inspection of Linings on Steel and Concrete, Item No. 21039
RP0388-2001 .......................... Impressed Current Cathodic Protection of Internal SubmergedSurfaces of Carbon Steel Water Storage Tanks, Item No. 21040
RP0189-2002 .......................... On-Line Monitoring of Cooling Waters, Item No. 21041
Main Menu
How to Find aStandard
Test Methods
RecommendedPractices
MaterialRequirements
RP0290-2000 .......................... Impressed Current Cathodic Protection of Reinforcing Steel inAtmospherically Exposed Concrete Structures, Item No. 21043
RP0390-98 .............................. Maintenance and Rehabilitation Considerations for Corrosion Controlof Atmospherically Exposed Steel-Reinforced Concrete Structures,Item No. 21044
RP0490-2001 .......................... Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatingsof 250 to 760 micrometers (10 to 30 mils), Item No. 21045
RP0590-96 .............................. Recommended Practice for Prevention, Detection, and Correction ofDeaerator Cracking, Item No. 21046
RP0690-2004 .......................... Standard Format for Collection and Compilation of Data forComputerized Material Corrosion Resistance Database Input, ItemNo. 21047
RP0191-2002 .......................... The Application of Internal Plastic Coatings for Oilfield Tubular Goodsand Accessories, Item No. 21048
RP0291-2005 .......................... Care, Handling, and Installation of Internally Plastic-Coated OilfieldTubular Goods and Accessories, Item No. 21049
RP0391-2001 .......................... Materials for the Handling and Storage of Commercial Concentrated(90 to 100%) Sulfuric Acid at Ambient Temperatures, Item No. 21050
RP0491-2003 .......................... Worksheet for the Selection of Oilfield Nonmetallic Seal Systems,Item No. 21051
Main Menu
How to Find aStandard
Test Methods
RecommendedPractices
MaterialRequirements
RP0192-98 .............................. Monitoring Corrosion in Oil and Gas Production with Iron Counts,Item No. 21053
RP0292-2003 .......................... Installation of Thin Metallic Wallpaper Lining in Air Pollution Controland Other Process Equipment, Item No. 21054
RP0392-2001 .......................... Recovery and Repassivation After Low pH Excursions in OpenRecirculating Cooling Water Systems, Item No. 21055
RP0492-99 .............................. Metallurgical and Inspection Requirements for Offshore PipelineBracelet Anodes, Item No. 21056
RP0592-2001 .......................... Application of a Coating System to Interior Surfaces of New and UsedRail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service,Item No. 21057
RP0692-2003 .......................... Application of a Coating System to Exterior Surfaces of Steel RailCars, Item No. 21058
RP0892-2001 .......................... Coatings and Linings over Concrete for Chemical Immersion andContainment Service, Item No. 21060
RP0193-2001 .......................... External Cathodic Protection of On-Grade Carbon Steel Storage TankBottoms, Item No. 21061
RP0394-2002 .......................... Application, Performance, and Quality Control of Plant-Applied,Fusion-Bonded Epoxy External Pipe Coating, Item No. 21064
Main Menu
How to Find aStandard
Test Methods
RecommendedPractices
MaterialRequirements
RP0195-2001 .......................... Recommended Practice for Corrosion Control of Sucker Rods byChemical Treatment, Item No. 21069
RP0295-2003 .......................... Application of a Coating System to Interior Surfaces of New and UsedRail Tank Cars, Item No. 21070
RP0395-99 .............................. Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars, Item No.21071
RP0495-2003 .......................... Guidelines for Qualifying Personnel as Abrasive Blasters and Coatingand Lining Applicators in the Rail Industries, Item No. 21072
RP0196-2004 .......................... Galvanic Anode Cathodic Protection on Internal Submerged Surfacesof Steel Water Storage Tanks, Item No. 21077
RP0296-2004 .......................... Guidelines for Detection, Repair, and Mitigation of Cracking of ExistingPetroleum Refinery Pressure Vessels in Wet H
2S Environments, Item
No. 21078
RP0197-2004 .......................... Standard Format for Computerized Electrochemical Polarization CurveData Files, Item No. 21080
RP0297-2004 .......................... Maintenance Painting of Electrical Substation Apparatus IncludingFlow Coating of Transformer Radiators, Item No. 21081
RP0497-2004 .......................... Field Corrosion Evaluation Using Metallic Test Specimens, Item No.21083
Main Menu
How to Find aStandard
Test Methods
RecommendedPractices
MaterialRequirements
RP0198-2004 .......................... The Control of Corrosion Under Thermal Insulation and FireproofingMaterials—A Systems Approach, Item No. 21084
RP0298-98 .............................. Sheet Rubber Linings for Abrasion and Corrosion Service, Item No.21085
RP0398-98 .............................. Recommendations for Training and Qualifying Personnel as RailcarCoating and Lining Inspectors, Item No. 21086
RP0199-2004 .......................... Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plates in Air Pollution ControlEquipment, Item No. 21087
RP0399-2004 .......................... Plant-Applied External Coal Tar Enamel Pipe Coating Systems:Application, Performance, and Quality Control, Item No. 21089
RP0100-2004 .......................... Cathodic Protection of Prestressed Concrete Cylinder Pipelines, ItemNo. 21090
RP0200-2000 .......................... Steel-Cased Pipeline Practices, Item No. 21091
RP0300-2003 .......................... Pilot-Scale Evaluation of Corrosion and Fouling Control Additives forOpen Recirculating Cooling Water Systems, Item No. 21092
RP0102-2002 .......................... In-Line Inspection of Pipelines, Item No. 21094
Main Menu
How to Find aStandard
Test Methods
RecommendedPractices
MaterialRequirements
RP0302-2002 .......................... Selection and Application of a Coating System to Interior Surfaces ofNew and Used Rail Tank Cars in Molten Sulfur Service, Item No.21095
RP0402-2002 .......................... Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems forGirth Weld Joints: Application, Performance, and Quality Control, ItemNo. 21096
RP0502-2002 .......................... Pipeline External Corrosion Direct Assessment Methodology, Item No.21097
RP0602-2002 .......................... Field-Applied Coal Tar Enamel Pipe Coating Systems: Application,Performance, and Quality Control, Item No. 21098
RP0303-2003 .......................... Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application,Performance, and Quality Control, Item No. 21101
RP0403-2003 .......................... Avoiding Caustic Stress Corrosion Cracking of Carbon Steel RefineryEquipment and Piping, Item No. 21102
RP0104-2004 .......................... The Use of Coupons for Cathodic Protection Monitoring Applications,Item No. 21105
RP0204-2004 .......................... Stress Corrosion Cracking (SCC) Direct Assessment Methodology,Item No. 21104
RP0304-2004 .......................... Design, Installation, and Operation of Thermoplastic Liners for OilfieldPipelines, Item No. 21103
Main Menu
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
Test Methods
TM0169-2000 .......................... Laboratory Corrosion Testing of Metals, Item No. 21200
TM0172-2001 .......................... Determining Corrosive Properties of Cargoes in Petroleum ProductPipelines, Item No. 21204
TM0173-99.............................. Methods for Determining Quality of Subsurface Injection Water UsingMembrane Filters, Item No. 21205
TM0174-2002 .......................... Laboratory Methods for the Evaluation of Protective Coatings andLining Materials on Metallic Substrates in Immersion Service, ItemNo. 21206
TM0374-2001 .......................... Laboratory Screening Tests to Determine the Ability of Scale Inhibitorsto Prevent the Precipitation of Calcium Sulfate and Calcium Carbonatefrom Solution (for Oil and Gas Production Systems), Item No. 21208
TM0177-96.............................. Laboratory Testing of Metals for Resistance to Sulfide Stress Crackingand Stress Corrosion Cracking in H2S Environments, Item No. 21212
TM0183-2000 .......................... Evaluation of Internal Plastic Coatings for Corrosion Control of TubularGoods in an Aqueous Flowing Environment, Item No. 21213
TM0284-2003 .......................... Evaluation of Pipeline and Pressure Vessel Steels for Resistance toHydrogen-Induced Cracking, Item No. 21215
Main Menu
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
TM0384-2002 .......................... Holiday Detection of Internal Tubular Coatings of Less Than 250micrometers (10 mils) Dry-Film Thickness, Item No. 21216
TM0185-2000 .......................... Evaluation of Internal Plastic Coatings for Corrosion Control of TubularGoods by Autoclave Testing, Item No. 21217
TM0186-2002 .......................... Holiday Detection of Internal Tubular Coatings of 250 to 760micrometers (10 to 30 mils) Dry-Film Thickness, Item No. 21218
TM0286-2001 .......................... Cooling Water Test Unit Incorporating Heat Transfer Surfaces, ItemNo. 21219
TM0187-2003 .......................... Evaluating Elastomeric Materials in Sour Gas Environments, Item No.21220
TM0190-98.............................. Impressed Current Laboratory Testing of Aluminum Alloy Anodes, ItemNo. 21221
TM0192-2003 .......................... Evaluating Elastomeric Materials in Carbon Dioxide DecompressionEnvironments, Item No. 21222
TM0193-2000 .......................... Laboratory Corrosion Testing of Metals in Static Chemical CleaningSolutions at Temperatures Below 93°C (200°F), Item No. 21223
TM0194-2004 .......................... Field Monitoring of Bacterial Growth in Oilfield Systems, Item No.21224
Main Menu
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
TM0294-2001 .......................... Testing of Embeddable Impressed Current Anodes for Use in CathodicProtection of Atmospherically Exposed Steel-Reinforced Concrete,Item No. 21225
TM0296-2002 .......................... Evaluating Elastomeric Materials in Sour Liquid Environments, ItemNo. 21227
TM0197-2002 .......................... Laboratory Screening Test to Determine the Ability of Scale Inhibitorsto Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfatefrom Solution (for Oil and Gas Production Systems), Item No. 21228
TM0297-2002 .......................... Effects of High-Temperature, High-Pressure Carbon DioxideDecompression on Elastomeric Materials, Item No. 21229
TM0397-2002 .......................... Screening Tests for Evaluating the Effectiveness of Gypsum ScaleRemovers, Item No. 21230
TM0497-2002 .......................... Measurement Techniques Related to Criteria for Cathodic Protectionon Underground or Submerged Metallic Piping Systems, Item No.21231
TM0198-2004 .......................... Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys(CRAs) for Stress Corrosion Cracking in Sour Oilfield Service, ItemNo. 21232
TM0298-2003 .......................... Evaluating the Compatibilty of FRP Pipe and Tubulars with OilfieldEnvironments, Item No. 21233
Main Menu
How to Find aStandard
MaterialRequirements
RecommendedPractices
Test Methods
TM0398-98.............................. Laboratory Corrosion Testing of Metals in Static Chemical CleaningSolutions at Temperatures Above 100°C (212°F), Item No. 21234
TM0498-2002 .......................... Standard Test Methods for Measuring the Carburization of Alloys Usedfor Ethylene Cracking Furnace Tubes, Item No. 21235
TM0199-99.............................. Standard Test Method for Measuring Deposit Mass Loading (“DepositWeight Density”) Values for Boiler Tubes by the Glass-Bead-BlastingTechnique, Item No. 21236
TM0299-99.............................. Corrosion Control and Monitoring in Seawater Injection Systems, ItemNo. 21237
TM0399-99.............................. Standard Test Method for Phosphonate in Brine, Item No. 21238
TM0499-99.............................. Immersion Corrosion Testing of Ceramic Materials, Item No. 21239
TM0101-2001 .......................... Measurement Techniques Related to Criteria for Cathodic Protectionon Underground or Submerged Metallic Tank Systems, Item No. 21240
TM0102-2002 .......................... Measurement of Protective Coating Electrical Conductance onUnderground Pipelines, Item No. 21241
TM0103-2003 .......................... Laboratory Test Procedures for Evaluation of SOHIC Resistance ofPlate Steels Used in Wet H2S Service, Item No. 21242
TM0104-2004 .......................... Offshore Platform Ballast Water Tank Coating System Evaluation,Item No. 21243
Main Menu
TM0204-2004 .......................... Exterior Protective Coatings for Seawater Immersion Service, ItemNo. 21244
TM0304-2004 .......................... Offshore Platform Atmospheric and Splash Zone Maintenance CoatingSystem Evaluation, Item No. 21245
TM0404-2004 .......................... Offshore Platform Atmospheric and Splash Zone New ConstructionCoating System Evaluation, Item No. 21246
How to Find aStandard
Test Methods
RecommendedPractices
MaterialRequirements