N Catalogue print ready high res pp164 (including Photometric data) · Perumahan Bumi Bekasi Baru,...
2
SANS/IEC 60598-2-1 NB NB Permit No. 2061/9658 NB/IP 65 Bulkhead Luminaire has been designed to satisfy a wide range of Industrial and Architectural applications. It can be used as a standard bulkhead, lowbay or streetlight. Applications: Industrial Lighting Security Lighting Conveyor Lighting Mining Lighting Public Lighting Ingress Protection: IP 65
Transcript of N Catalogue print ready high res pp164 (including Photometric data) · Perumahan Bumi Bekasi Baru,...
SANS/IEC 60598-2-1
NB
NB
Permit No. 2061/9658
NB/IP 65 Bulkhead Luminaire has been designed to satisfy a wide range of Industrial and Architectural applications.It can be used as a standard bulkhead, lowbay or streetlight.
Applications:Industrial LightingSecurity LightingConveyor LightingMining LightingPublic Lighting
Ingress Protection: IP 65
Nordland (Pty) LtdPO Box 522Muldersdrift1747Tel (011) 662 4300Fax (011) 662 4319Email [email protected]
Matelec (Pty) LtdUnit 13, Magnum Park108 Bofors CircleEpping 2, Cape Town 7460Tel (021) 534 9544Fax (021) 534 7132Email [email protected]
Afrilite ccUnit 10, Rossmead14 Malone RoadWestmead Industrial ParkPinetown 3610Tel/Fax (031) 701 1119Email [email protected]
AustraliaHella Australia (Pty) LtdSouthern RoadMentoneVictoria 3194Tel (3) 9581 9333Fax (3) 9585 2654
IndonesiaPT. Raphita Jaya MandiriJI Baturaden Raya No 135Block IV/Utara, Perumahan Bumi Bekasi Baru, Pengasinan, Bekasi 17115Tel (62) 021-8 24 26143
Body: High pressure die cast thin wall LM 6 aluminium Lens: Injection Moulded Clear polycarbonate lens. Smooth exterior with interior prisms. Prisms are designed for wide beam distribution. The rounded oval nature of the lens prevents dust build up which is easily removed by spraying, in exceedingly dirty atmospheres. Four captive aluminium screws exterior to the gasket, ensure IP65 rating is maintained.Gasket: Round silicone sponge gasket retained within a recess in the cast aluminium base to ensure total sealing.Reflector: The Geartray is white powder coated to which specifically designed reflectors are attached, which enhance beam distribution.Control Gear Options: Electronic balast HID 70 W to 150 W high pressure sodium, 2x18 W linear compact fluorescent70 W to 150 W metal halide, 2x24 W linear compact fluorescent 80 W to 125 W mercury vapourEmergency: Certain of the fluorescent luminaries can be fitted with inverter charger and battery back up, to operate in the
maintained mode. Alternatively as a non maintained unit. Cold Rooms: Electronic fluorescent control gear operates to -20°C HID chokes for high pressure sodium with external ignitor fiteed operate to -40°C.Mounting: Four 8 mm blind threaded holes on the rear of the base allow many choices of alignment. Options include Wall Ceiling Brackets. Angled wall brackets. Antivibration mountings, pole mounting brackets and an angled post-top bracket.Entries: Provision is made for four entry position as well as a rear entry rose. The bulkhead is supplied with one entry threaded 20 mm, and supplied complete with gland.Tamper Proof Screws: The bulkhead can be supplied with Tamper proof screws requiring a special tool.Clips: The bulkhead can be supplied with stainless steel clips
Catalogue Numbers
Lamp (W)
Lamp Cap
Mass (kg)
Watts(W)
Line CurrentPower FactorStarting
(A)Running
(A)
NB 2x18 W ELB Compact L 2G11 5.1 or 4.8 40 W 0.375 0.375 0.96
NB 2x24 W ELB Compact L 2G11 5.1 or 4.8 54 W 0.375 0.375 0.96
NB 70 W HPS/E-C 70 W E27 5.1 83 W 0.72 0.45 0.85
NB 100 W HPS 100 W E40 5.7 117 W 0.72 5.80 0.85
NB 150 W HPS 150 W E40 7.1 176 W 1.30 0.88 0.85
NB 70 W MH/E 70 W E27 5.1 83 W 0.72 0.40 0.85
NB 100 W MH 100 W E40 5.7 117 W 0.72 0.58 0.85
NB 150 W MH 150 W E40 7.1 176 W 1.30 0.88 0.85
Emergency
NB 2x18 W SS/Em 50% Compact L 2G11 5.1 46 W 0.48 0.48 0.85
NB 2x18 W ELB/Em 50% Compact L 2G11 4.8 40 W 0.375 0.375 0.95
