MZET 25 PSK-K-TSSL - di-soricMZET 25 PSK-K-TSSL Cylinder Sensor di-soric GmbH & Co. KG...
1
201144 © di-soric | Subject to modifications | 07/04/20 | Page 1 (1) MZET 25 PSK-K-TSSL Cylinder Sensor di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com TECHNICAL INFORMATION (typ.) +20°C, 24V DC Cylinder groove T-groove, mounting in longitudinal direction of slot Mounting Locking screw, allen screw SW 1.5 mm Maximum rating 200 mA, short-circuit-proof, polarity-safe Service voltage 10 ... 30 V DC No-load current 10 mA Switching output pnp, 200 mA, NO, short circuit protected Contact rating 6 W max. (30 V, 200 mA) Display LED: yellow - output signal Voltage drop < 2,0 V Switching frequency 1000 Hz Reproducibility 0,1 mm Ambient temperature, operation -25 … +70 °C Insulation voltage endurance 500 V Protection class IP 68, (Device and cable), IP 67, (Connector) Protection degree III, operation on protective low voltage Casing material Die-cast zinc Material PUR (Cable) Connection Cable, Connector, 0,3 m, M8 Connecting cable TK ... ... IBS ... TSSL ... PSL ... PSL/5 45 8 6.1 12 25 50 6 37 8 5 LED M2 22.5 5 2.5 3 Ø14 M8 M12 Ø10 Kabelclip beigelegt Cable tie-clip included BN = brown BK = black BU = blue BN BK BU 1 4 3 S pnp Safety instructions The Instruments are not to be used for safety applications, in particular applications in which safety of persons depends on proper operation of the instruments. These instruments shall exclusively be used by qualified personnel. For pneumatic cylinders with T-shaped slot Metal casing All-electronically High reproducibility High protection class Mounting accessory available for round, pull-rod and profiled cylinders
Transcript of MZET 25 PSK-K-TSSL - di-soricMZET 25 PSK-K-TSSL Cylinder Sensor di-soric GmbH & Co. KG...
201144
© di-soric | Subject to modifications | 07/04/20 | Page 1 (1)
MZET 25 PSK-K-TSSL
Cylinder Sensor
di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach
Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com
TECHNICAL INFORMATION (typ.) +20°C, 24V DC
Cylinder groove T-groove, mounting in longitudinal direction of slot
Mounting Locking screw, allen screw SW 1.5 mm
Maximum rating 200 mA, short-circuit-proof, polarity-safe
Service voltage 10 ... 30 V DC
No-load current 10 mA
Switching output pnp, 200 mA, NO, short circuit protected
Contact rating 6 W max. (30 V, 200 mA)
Display LED: yellow - output signal
Voltage drop < 2,0 V
Switching frequency 1000 Hz
Reproducibility 0,1 mm
Ambient temperature, operation -25 … +70 °C
Insulation voltage endurance 500 V
Protection class IP 68, (Device and cable), IP 67, (Connector)
Protection degree III, operation on protective low voltage
Casing material Die-cast zinc
Material PUR (Cable)
Connection Cable, Connector, 0,3 m, M8
Connecting cable TK ...
... IBS
... TSSL
... PSL
... PSL/5
45
8
6.1
12
25
50
6
37
8
5
LED
M2
22.5
5
2.5
3
Ø14
M8
M12
Ø10
Kabelclip beigelegtCable tie-clip included
BN = brown
BK = black
BU = blue
BN
BK
BU
1
4
3
Spnp
Safety instructionsThe Instruments are not to be used for safety applications, in particularapplications in which safety of persons depends on proper operation of theinstruments.These instruments shall exclusively be used by qualified personnel.
For pneumatic cylinders with T-shaped slot
Metal casing
All-electronically
High reproducibility
High protection class
Mounting accessory available for round, pull-rod and profiled
cylinders
