MyQ Garage Wi-Fi setup on Apple device

download MyQ Garage Wi-Fi setup on Apple device

of 7

  • date post

    11-Jan-2016
  • Category

    Documents

  • view

    30
  • download

    0

Embed Size (px)

description

MyQ Garage Wi-Fi setup on Apple device. Click each page to get to the next step. 1. Tap the Settings icon. 2. Make sure the Wi-Fi shows the name of the customer’s network (Home Router here) then tap Bluetooth. - PowerPoint PPT Presentation

Transcript of MyQ Garage Wi-Fi setup on Apple device

MyQ Garage Wi-Fi setup on Apple device

MyQ Garage Wi-Fi setup on Apple deviceClick each page to get to the next step1. Tap the Settings icon

2. Make sure the Wi-Fi shows the name of the customers network (Home Router here) then tap Bluetooth.

3. If the Bluetooth is not on, turn it on by clicking the white button. You will see the MyQ-nnn under devices. Click the MyQ device and it will begin to connect. Note: nnn is the last three digits of the hub serial number.

4. It will show connected.

5. Once the apple device has connected to the MyQ Garage, a message will be displayed to Ignore or Allow the sharing of your home routers Wi-Fi settings, click Allow. This allows the Wi-Fi hub to copy the wireless network password and then connect to the wireless network.Note: The customer may receive a pop up that asks if they would like to download the app at the App Store. This only happens the first time the Wi-Fi is set up.

6. The apple device will then show Not Connected, at this point the hub has disconnected from the Bluetooth and is trying to connect to the wireless network. Check the hub for a solid green LED. Go to the App Store and download the MyQ app.