MyCatalog glasstec · EMail [email protected] Booth Hall 13 C17-2 PRODUCT OVERVIEW 01.03.02 Drying...

Personal Guide For:

Messe Düsseldorf GmbHPostfach 10100640001 DüsseldorfGermanyTel. +49 (0)211 / 45 60-01Fax +49 (0)211 / 45 60-668www.messe-duesseldorf.de

© 2004 Messe Düsseldorf

Search Criteria:

Email : Product category: 01 - Glass production / Production Technique

-- Exhibitors with address and hall location- Hall map for each exhibitor- News / Product News- Product groups with descriptions and illustrations

www.glasstec-online.com MyCatalog glasstec

© 2004 Messe Düsseldorf

T A B L E O F C O N T E N T S

Exhibitor Overview ................................................................................ 829 - 996A. & L. Rondot S.a.s. ................................................................................... 830A.W.T. World Trade Europe B.V. ................................................................ 830AEG Power Supply Systems GmbH ........................................................... 831AGK Hochleistungswerkstoffe GmbH ......................................................... 831Alfaref GmbH ............................................................................................... 832All Glass S.r.l. .............................................................................................. 833AMBEG Dr. J. Dichter GmbH ...................................................................... 833AMIG S.r.l. ................................................................................................... 834Antonini S.r.l. ............................................................................................... 835Armatec Vierhaus GmbH ............................................................................ 836Asahi Glass Ceramics Co., Ltd. .................................................................. 837Automazioni Industriali Albertini S.r.l. .......................................................... 838Batisti Meccanica S.r.l. ................................................................................ 839BDF - Boscato & Dalla Fontana S.p.A. ....................................................... 839Bedogni Società Cooperativa ...................................................................... 840Beijing Trend Hi-Tech Insulating Materials Co., Ltd. ................................... 841Bekintex N.V. ............................................................................................... 841Belgium Glass Equipment s.a. .................................................................... 842Beneq Oy .................................................................................................... 842Bernard et Bonnefond S.A. ......................................................................... 843BH-F (Engineering) Ltd. .............................................................................. 844Billco Manufacturing, Inc. ............................................................................ 845Bock Energietechnik .................................................................................... 846Bonaiti Pietro s.n.c. ..................................................................................... 846Bosch Rexroth AG, Vertrieb und Marketing, Antriebstechnik Zahnkette .... 847BVD PECE spol. s r.o. ................................................................................. 848BYC Rollmakers a Division of Cope Engineering (Radcliffe) Limited ......... 848Bystronic Maschinen AG ............................................................................. 849C.RE.F.IN. S.r.l. ........................................................................................... 850Carbone Lorraine Composants S.A.S. ........................................................ 850Car-Met S.p.A. ............................................................................................. 851

glasstec glasstecInternational Tradefair with Special Show + Symposium glass technology live International Tradefair with Special Show + Symposium glass technology live

www.glasstec-online.com MyCatalog www.glasstec-online.com MyCatalog

© 2004 Messe Düsseldorf 826

Casso-Solar Corporation ............................................................................. 852CERHEC Ceramic and Heating Elements Company .................................. 852Cestaro S.n.c. .............................................................................................. 853Changshu Jianhua Die Sets Co., Ltd. ......................................................... 854Changshu Jing Gong Mould Mfg. Co., Ltd. ................................................. 854China Starlight Refractory Co., Ltd ............................................................. 855Cimec Oy ..................................................................................................... 856CNUD-EFCO ............................................................................................... 857COGNEX Corporation ................................................................................. 858Control & Heating-Systems, Dipl.-Ing. Rainer Pilz ...................................... 858Dalian Baoli Color Glass Co., Ltd. ............................................................... 859Datapaq GmbH ........................................................................................... 859De Raedt Industrial Fans ............................................................................. 860DMA Maschinen- und Anlagenbau GmbH & Co. KG .................................. 861Dow Corning GmbH .................................................................................... 861Dr. Gold & Co. KG ....................................................................................... 862DSF Refractories & Minerals Ltd. ................................................................ 863Dyson Thermal Technologies (Precision Ceramics) ................................... 863Eclipse, Inc. ................................................................................................. 864EGLASS Machinery & Parts GmbH ............................................................ 864Eirich GmbH & Co KG, Gustav, Maschinenfabrik ....................................... 865Electroglass Ltd. .......................................................................................... 866ELIOG Kelvitherm Industrieofenbau GmbH ................................................ 867EME Maschinenfabrik Clasen GmbH .......................................................... 867Emhart Glass SA ......................................................................................... 868EMMETI S.P.A. ........................................................................................... 869Euromatic S.r.l. ............................................................................................ 869EURO-TECH, Vakuum-, Hebe- und Transporttechnik ................................ 870Excelsius International GmbH ..................................................................... 871F.I.C. (UK) Limited ....................................................................................... 871F.O.R.T.E. S.r.l. ........................................................................................... 872Falorni Gianfranco S.r.l. .............................................................................. 872Ferlam Technologies ................................................................................... 873Ferro Corporation, Glass Systems .............................................................. 873FIB Belgium, Le Four Industriel Belge ........................................................ 874

Fibertec - Consortium GmbH ...................................................................... 875Fima Olimpia Fonderie S.p.A. ..................................................................... 876Fonderie Bartalesi S.r.l. ............................................................................... 876Fonderie Valdelsane S.p.A. ........................................................................ 877FOND METALLI Conveyors S.r.l. ............................................................... 877FOR.EL S.p.A. ............................................................................................. 878Forma Glasmaschinen - Fr. Wilhelm Kutzscher GmbH .............................. 878Friedrich Farbglashütte GmbH, Kugler Colors® ......................................... 879Fuchs Lubritech GmbH ............................................................................... 879Füller Glastechnologie Vertriebs-GmbH ..................................................... 880futronic GmbH ............................................................................................. 880GEROLD GmbH & Co. KG, Maschinenbau ................................................ 881Giardina Officine Aeromeccaniche S.p.A. ................................................... 882GLAMACO Maschinenbau GmbH .............................................................. 882Glass Concepts International, Inc. .............................................................. 884Glass Service Inc. ....................................................................................... 885Glass Service S.r.l. ...................................................................................... 886Glass Technologies S.r.l. ............................................................................ 886Glass Technology International GmbH ....................................................... 887Glassworks Hounsell Ltd ............................................................................. 887G-LEHRS .................................................................................................... 888Go To s.a. .................................................................................................... 889GPM-Glass Project Management and Used Equipment ............................. 889GPS Glasproduktions-Service GmbH ......................................................... 890GRAFIX GmbH, Zerstäubungstechnik ........................................................ 891Grafotec Spray Systems GmbH .................................................................. 891Grenzebach Maschinenbau GmbH ............................................................. 894Grenzebach Maschinenbau GmbH ............................................................. 895Gronemeyer Maschinenfabrik GmbH & Co. ................................................ 896Hager Sondermaschinenbau GmbH ........................................................... 897Hanic GmbH, Software für Glas .................................................................. 897Heat Up ....................................................................................................... 898HEYE International GmbH .......................................................................... 898Horn Glass Industries AG ............................................................................ 901Hotwork International AG ............................................................................ 902




Hubtex Maschinenbau GmbH & Co. KG ..................................................... 902HyRadix, Inc. ............................................................................................... 903I.S. Maintenance Ltd. .................................................................................. 905IAL Ltd ......................................................................................................... 905Icebel, Lda. .................................................................................................. 906ICS Inex Inspection Systems ...................................................................... 907IfG Ingenieurbüro für Glastechnik GmbH .................................................... 907IMS Engineering Ltd .................................................................................... 909Inhom-98 Ltd. .............................................................................................. 910INMARA AG ................................................................................................ 910Intco GmbH ................................................................................................. 911Interglass S.A. de C.V. ................................................................................ 911IRIS Inspection Machines ............................................................................ 912I-Scan Robotics Ltd. .................................................................................... 913Italcarrelli S.r.L. ........................................................................................... 914JCL Engineering Pte Ltd ............................................................................. 914Johnson Matthey Noble Metals ................................................................... 915JSJ Jodeit GmbH ........................................................................................ 915Kanthal, ZN der Sandvik GmbH .................................................................. 916Kappel GmbH, Robert ................................................................................. 917Kararmaz Kalip San. ve Tic. Ltd. Sti. .......................................................... 917Kaveh Glass Industry Group ....................................................................... 918Keraglass Engineering S.r.l. ........................................................................ 918Khavar Bolour Co. ....................................................................................... 919Körting Hannover AG, Bereich W, Industrie- und Prozesswärme,Feuerungstechnik ........................................................................................ 920Kreisel GmbH & Co. KG .............................................................................. 921KRS Recycling Systems GmbH .................................................................. 922KSO-Gobi Ofenbau GmbH .......................................................................... 922KTG Engineering Ltd. .................................................................................. 923Langendorf GmbH ....................................................................................... 923Langendorf GmbH ....................................................................................... 924Laser Zentrum Hannover e.V. (LZH) ........................................................... 925LAT Antriebstechnik GmbH & Co. KG ........................................................ 925Linde AG, Linde Gas Division ..................................................................... 926

Linn - High Therm GmbH ............................................................................ 927Liya Glass Co. Inc. (P.J.S.) Float Glass Line .............................................. 928Logicon Engineers Pvt. Ltd. ........................................................................ 929Logistic System Pichler GmbH .................................................................... 930Löwinger GmbH .......................................................................................... 930LWN Lufttechnik GmbH ............................................................................... 931Lynch Systems, Inc. .................................................................................... 931M.E. Schupp Industriekeramik GmbH & Co. KG ......................................... 932M.T. Forni Industriali S.r.l. ........................................................................... 933MDI SCHOTT Advanced Processing GmbH ............................................... 934Merkad Makina Kalip San. Ve Tic. Ltd. Sti. ................................................. 934Merkle Engineers, Inc. ................................................................................. 936Metaltecno S.r.l. Unipersonale .................................................................... 937METAVIL, Lda ............................................................................................. 938Metra Verre ................................................................................................. 938Mineraux et Machines ................................................................................. 938Mopavid, S.L. .............................................................................................. 939MSK Verpackungs-Systeme GmbH ............................................................ 939Nabertherm GmbH ...................................................................................... 940New Hudson Corporation ............................................................................ 940Nirvana Technologies (P) Ltd. ..................................................................... 941Norddeutsche Seekabelwerke GmbH & Co. KG ......................................... 941NOVAXION ................................................................................................. 942OCMI-OTG S.p.A. ....................................................................................... 943Officine Mistrello S.r.l. ................................................................................. 943Omco International N.V. .............................................................................. 944Optima S.r.l. ................................................................................................ 944Ori Mould Technology Co., Ltd., Suzhou .................................................... 945OSC S.p.A., Glass Mould Factory ............................................................... 945Pannkoke Flachglastechnik GmbH ............................................................. 946Parkinson-Spencer Refractories Ltd. .......................................................... 947P-D Refractories, P-D Industries GmbH * Feuerfestwerke Wetro ............... 948PEMCO International c/o PEMCO Emails S.r.l. .......................................... 948Penelectro Limited ....................................................................................... 949Pennekamp GmbH & Co OHG, Ernst ......................................................... 949




Pennine Industrial Equipment Ltd ............................................................... 951PKI - Teplotechna Brno spol. s r.o. ............................................................. 952Plansee Metall GmbH ................................................................................. 953Pneumofore S.p.A. ...................................................................................... 954Podolskrefractories, JSC ............................................................................. 954Putsch - Meniconi S.p.A. ............................................................................. 955Quantum Engineered Products, Inc. ........................................................... 956Ramsey Products Corporation .................................................................... 957Rapidflame Limited ...................................................................................... 957Rath AG ....................................................................................................... 958Raute Precision Oy ..................................................................................... 959REFEL S.p.A. .............................................................................................. 960Reker Maschinenfabrik, Adolf ..................................................................... 961Rescal S.A. .................................................................................................. 961RHI Glas GmbH .......................................................................................... 962Rurex-Stahl, Dr. Otto Kukla GmbH ............................................................. 962S.I.G.MA. S.r.l., Refrattari Tecnici Industriali ............................................... 963Saati S.p.A. ................................................................................................. 963Saint-Gobain SEFPRO ................................................................................ 964Save S.r.l. .................................................................................................... 965Saxonia Edelmetalle GmbH ........................................................................ 965Schrader Glasformenbau GmbH & Co. KG ................................................ 966Schunk Kohlenstofftechnik GmbH .............................................................. 966Sebino Arte S.r.l. ......................................................................................... 967Semiluki Refractory Plant, JSC ................................................................... 967SGCC .......................................................................................................... 968Siebenlist Glas Creativ-Werkstatt ............................................................... 969Simtech S.p.r.l. ............................................................................................ 969Sklárny Kavalier, a.s. ................................................................................... 970Skloform s.s. ................................................................................................ 971Sklostroj Turnov CZ s.r.o. ............................................................................ 971SMT Lager- und Transportsysteme GmbH ................................................. 973Software & Technologie Glas GmbH .......................................................... 974Starshine GmbH & Co KG ........................................................................... 975Stein Heurtey ............................................................................................... 975

Steklopack ................................................................................................... 976Stewart Engineers ....................................................................................... 976STRADA S.r.l. ............................................................................................. 977Studio 1 S.r.l., Automazioni Industriali ........................................................ 977Supertrucks Ltd ........................................................................................... 978SVA Industrie-Fernseh-GmbH .................................................................... 979System Res ................................................................................................. 979Tecoglas Ltd. ............................................................................................... 980TEC REF S.r.l. ............................................................................................. 981TEKA Maschinenbau GmbH ....................................................................... 982Thimon ........................................................................................................ 983Toledo Engineering Co. Inc. (Teco) ............................................................ 983Torgauer Maschinenbau GmbH .................................................................. 984UAS Messtechnik GmbH ............................................................................. 985Upcycling GmbH + Co. KG ......................................................................... 987Valoref ......................................................................................................... 987Viprotron GmbH .......................................................................................... 988Vision Electric GmbH .................................................................................. 989VITRUMA GmbH & Co. KG ......................................................................... 989W. Haldenwanger, Technische Keramik GmbH & Co. KG ......................... 990W. Lindner Maschinen GmbH ..................................................................... 990Wirth GmbH ................................................................................................. 992WITT-Gasetechnik GmbH & Co KG ............................................................ 992Yilmazcan Makine Kalipsan Ltd. ................................................................. 994Z & J Technologies GmbH .......................................................................... 995Zecchetti S.r.l. ............................................................................................. 995Zippe Industrieanlagen GmbH .................................................................... 996

Fairground Map .............................................................................................. 997 Hall Map .............................................................................................. 998 - 1011




A . & L . R o n d o t S . a . s .

Address 9, rue Jean-Elysée DupuyChampagne au Mont d'OrFrance

Telephone (+33-4)72520860

Fax (+33-4)78474866

Internet Address www.specialtyrondot.com

EMail [email protected]

Booth Hall 13 D38

P R O D U C T O V E R V I E W

01.06 Forming for hollow glass

P R O D U C T D E T A I L S


STAINLESS STEEL SCOOPS/TROUGHSRONDOT STAINLESS STEEL SCOOPSAvailable in air-ride or water-cooled styles. Scoops require no coating ortreatment, improves sliding effect and lasts much longer than conventionalscoops.SPECIALTY RONDOT STAINLESS STEEL TROUGHSAir-cooled eliminates the need for coatings. Offers corrosion and oxidationresistance as well as long term life while being almost maintenance-free.RONDOT CAST IRON TROUGHSHigh precision machined equipment, special dimensions for perfume andpharmaceutical containers.Link zu weiterer Informationhttp://www.specialtyrondot.com/products.html

C O M P A N Y N E W S

Service linksback to topPrivacy PolicyTerms of UsePrint pageRecommend this page ©Messe DüsseldorfMore informations and functionsSearchSearch for News, Exhibitors, Products or Information about the fair

Enter search key:

A . W . T . W o r l d T r a d e E u r o p e B . V .

Address Televisieweg 159B1322 BH AlmereNetherlands

Telephone 0001-773-777-7700

Fax 0001-773-777-0909

Internet Address www.awt-europe.com


Booth Hall 13 C17-2


01.03.02 Drying technology

02.03.08 Screen printing techniques

02.03.08.01 Screen printing techniques

02.03.08.02 Screen washing machine

02.03.08.04 Other screen printing machines

02.06.02 Enamel glass machines, screen printers, thermal pressure equipment

02.06.05 Dryers and decorating technology

03.11.03.02.09 Screenprinting, framing, painting and texturing tools






Jet-Stream E-seriesHeating chamber utilizes a preheat system with "bump" high energy quartztubes. Large volumes of air, jet air knives and high efficiency heat panelsprovide the most efficient curing of evaporative inks and coatingsSolid stateindependent temperature controls to up to 350°F (177°C). Highertemperatures availableAir flow system removes solvents or water whilecreating a negative air force to hold stock down on the conveyorFresh air isdelivered to the chamber in a steady, adjustable volume with up to 90%recyclingNew Remote Diagnostics For Instant ServiceStock is held in placeon the variable speed Fiberlon conveyor belt. No flutteringRe-circulatinghoods on front and rear of dryer keep shop environment cleanPrintedmaterial is stabilized by the introduction of ambient air in the chamberEasyto access and serviceState-of-the-art safety system including restricted airflow alarm in case of clogged filters.Clean up easily with permanentstainless steel air filtersAdjustable inlet to drying chamber for differentthicker substrates and for heat retentionEven heat distributionDigital speedbelt readoutDouble wall construction to keep heat in and outside surfacecool to the touchModular expandable designMeets and exceeds US andinternational safety requirementsAmbient temperature cooling chamber

A E G P o w e r S u p p l y S y s t e m s G m b H

Address Emil-Siepmann-Straße 3259581 WarsteinGermany

Telephone 0049-2902-763-0

Fax +49-2902-763-680

Internet Address www.aegpss.de


Booth Hall 12 B37


01.04.07 Electric heating systems

01.05.01 Float glass technique

01.06.05 Blow feeder

01.09.03 Annealing lehrs, continuous/ intermittent operation


02.13.01 Components and accessories (suppliers to the glass machinery industry)

03.01 Flat glass

03.01.01 Float and mirror glass

03.01.05 Thin glass

05.02.03 Electronically controlled machine cooling



Thyristor Power Controller - Thyro-FamilyOur Experience for your Quality - worldwide

Industrial heating with Power Controller of the AEG Thyro-Family stands forquality, reliability, reproducibility, accuracy and comminication capability asessential features of the future orientated Thyro-Family.

A G K H o c h l e i s t u n g s w e r k s t o f f e G m b H

Address Fallgatter 844369 DortmundGermany

Telephone 0049-231-936964-0

Fax +49-231-936964-50

Internet Address www.agk-werkstoffe.de


Booth Hall 13 E13


01.02.01 Refractory materials

01.09.01 Transport systems

01.09.02 Stacker systems

01.13.09 Parts for conveying, transport, packing and warehouse technology

02.11.02 Replacement and spare parts




02.11.03 Insulating C203materials


03.08.02 Braided wire hoses and straps made of fibreglass

04.04 Replacement part, wearing parts



K-Therm®01.09.01 Transport systems

GleitTherm® - GleitschieneÜberall wo unter hohen Temperaturen transportiert und gefördert werdenmuss, kommen Gleitschienen und Kettengleitschienen aus GleitTherm®zum Einsatz

Link zu weiterer Informationhttp://www.agk-werkstoffe.de/html/gleitwerkstoffe.htm


GleitTherm®GleitTherm® bieten wir sowohl für den Heißglaskontakt an, als auch alsEinschiebedreiecke für den Kühlofen.

Link zu weiterer Informationhttp://www.agk-werkstoffe.de/html/glashuetten.htm

A l f a r e f G m b H

Address Langendamm 1925746 HeideGermany

Telephone 0049-481-1453

Fax +49-481-1457

Internet Address www.alfaref.de


Booth Hall 13 D37





Sekundärrohstoffe in verschiedenen Körnungsgrößen




A l l G l a s s S . r . l .

Address Via Cesare Sarti, 2043029 Traversetolo / PRItaly

Telephone 0039-0521-340810

Fax 0039-0521-340805

Internet Address www.allglass.it


Booth Hall 13 D75





01.09.05 Pre-heating furnaces

01.10.02 Cullet transport

01.10.06 Stacking machines

01.12.02 Cold end coating

01.13 Conveying, transport, packing and warehouse technology

01.13.01 Feeding and stacking systems

01.13.02 Transport and handling systems

01.13.04 Packing lines - boxes, shrinking, hoop-casing machinery



shuttle car


One lane Gantry Palletizer

A M B E G D r . J . D i c h t e r G m b H

Address Tempelhofer Weg 65-6810829 BerlinGermany

Telephone 0049-30-7800950

Fax +49-30-7881214

Internet Address www.ambeg.de


Booth Hall 14 A42


01.06.10 Ampoule and laboratory glass machines

01.06.11 Bottle and glass container machines


02.05.01 Laser-isolating technology






Ampoule forming A5Vertical 30-heads continuous motion machine for the production ofampoules

Operating rangeWorking range of chucks: Ø 9,5 - 26 mmmax. drawing length of stems: 60 mm

OutputUp to 5.000 pieces per hour depending on the diameter of the glass.

Dimensions and weightDiameter: 2.300 mmHeight: 1.850 mmWeight: 4.000 kg

ConsumptionConsumption values for gas, air and oxygen depend on the glass tube andthe type of gas used. Detailed information will be supplied on request.

FeaturesAutomatic tube feeder30 magazines for 270 glass tubes

Link zu weiterer Informationhttp://www.ambeg.de/u5e.html

A M I G S . r . l .

Address Via Venezia Giulia, 720157 MilanoItaly

Telephone 0039-02-3909181

Fax 0039-02-3570944

Internet Address www.amig.net


Booth Hall 14 D61



01.06.01 Gob feeder

01.06.02 Ball feeder

01.06.06 Press machines

01.06.07 Press-blow-machines

01.06.08 Spinning machines

01.06.13 Flash welding and fire polishing machines



F.A.36S Ampoule Forming MachineContinuous-action rotary machine with 36 vertical spindles for formingampoules from glass tube.

Welding Machine for Glass BlockAMIG has developed an automatic welding machine for hollow glass itemsmade in two parts.


LVR6 - 6-Axis Ball Gathering RobotThe LVR6, with its special design features and built-in air cooling system,can be installed in glassworks environments with no additional protectionmeasures.The gathering lance is water-cooled, allowing the use of either steel orrefractory gathering balls.




The LVR6 can gather up to 5 Kg of glass, with a positioning repeatability of0.04 mm.The LVR6's power rating is only 7.5 KVA.The IP54 standard control unit, complete with mobile keypad and videoterminal, can be supplied with internal air conditioning for floor-levelinstallation.The LVR6 can be interfaced and synchronised with all types of formingmachines.The LVR6 has a self-regulating software application for use withvariable-level melting furnaces, based on a mathematical algorithm relatedto the quantity of glass gathered, the furnace surface area and the densityof the glass. As an alternative, it can be interfaced with an analogic glasslevel control.


PAS8 Press-&-Blow Jar Forming MachinePAS8 is a machine especially devoted to tableware producers who need toimplement their scope of production with jugs and other household waresuch as flowerpots, ice buckets, fancy jars.

As far as structure and layout is concerned, it can be compared to atraditional turntable press.

Of such a type of machine it keeps the main structure consisting of a base,an indexing mechanism, a bridge born by three columns and a turntable.This latter, otherwise than the traditional presses, is not in fact a real tablebut a revolving structure, moved by an 8-station indexing mechanismoperated by electric servomotor, holding the different parts of each mouldat different levels.

The mould set consists of the following parts: Eight vertically moving block blank moulds. Eight two part neckrings. Eight two part blow moulds. Eight movable bottom plates.

The full forming process is performed through the 8 stations by thefollowing dedicated mechanisms installed at the different stations: Mechanism for the vertical movement of the blank mould. Pneumatic pressing mechanism complete with spring type mechanicalring holding cage and water-cooled plunger holder as well as wedge typeanvil. Mechanism for the shaping of the pouring spout. Two blow heads. Automatic unloading take-out mechanism with especially designedgripping mechanism. Air-cooling system with twin manifold for independent cooling of glass andmoulds.

Mechanism for the independent greasing of moulds and neckrings.

The machine is controlled and supervised by an electronic system of thelatest generation


ASM Series Automatic Spinning MachinesA full range of heavy duty spinning machines for the production of all typesof spun glassware articles.

A n t o n i n i S . r . l .

Address Via Medaglie d'Oro della Resistenza,250057 Empoli / FIItaly

Telephone 0039-0571-932-21

Fax 0039-0571-9318-28

Internet Address www.antoninisrl.com


Booth Hall 14 E50





Annealing lehrsInput sectionThis section is created according to the loading system: by hand orautomatic.For the manual system we install insulating doors lifted pneumatically orelectrically; these doors guarantee low-room temperatures for peopleworking around this area. For the automatic loading system we install aninsulating covering complete with door containing the input-roller, thetransfer plates, the cross-conveyor and the shovel of the pusher. Generallythis covering is fitted to the dimensions and the kind of the pusher.Temperature controlled section




This section is divided into areas where the air temperature is controlledthrough special systems. In each area there is a special air-recycling loopmaintained by one or more stainless steel turbines. By this process youobtain: stability of the temperature guaranteed by the forced-air circulation,uniformity of the temperature guaranteed by an efficient air distribution,maximum performance of the thermal exchange air-object , maximum useof the energy produced by the heating-systems. The elements into whichthis section is divided are completely independent both for theair-circulation and fir the heating and cooling systems. The elements thatmake up this section are equipped either with heating systems, or withheating and cooling systems or with cooling systems only. Each element ismade up of three parts: internal walls are in stainless steel or carbonioiumsteel, between the internal walls and the external ones an insulation iscreated by rock wool packed at a density of about 120 kg/m3; the externalframe is in steel and heating and cooling are located in the various areasaccording to the system and the kind of lehr you need to arrange.

Harvesting tableUncovered section and Belt-traction-groupWe would like to highlight the simplicity of the arrangement and the easyaccessibility to the installed devices. The structure is prepared according tothe needs of the customer and to the kind of the unloading (by hand orautomatically), the presence of cold-treatments (either from above or fromunderneath), the presence of belt-cleaning-systems and the kind of roomwhere the gathering is carried out.Heating systems:Direct heating-systemSection of lehr with direct-heating system with gas-fed Antonini-builtburners. This system is used in almost all the annealing and decoratinglehrs because we obtain the best ratio "performance/consumption".Depending on the gas pressure available in the plant, you can use burnersfor low pressure, the classic type (with fan) or burners for medium pressure,extremely simplebecause of the absence of the fan.Indirect heating-systemThe heating means, radiant-tubes, placed into the zones of the lehr areemployed as thermal-exchangers. They are made by a U-shaped tube ofrefractory steel and have the burner at one end, to feed them, and thechimneys for the exhausting of the combustion-smokes at the other. Forthis type of heating we can use any kind of gas and diesel oil.Electric heating-systemThe picture shows an electric triphase resistance-panel at high efficiencyand a section of the lehr where these panels are installed.The resistive heating elements are with an exposed winding hare-thread foroptimal maximum thermal exchange.Mixed heating-systemThe picture shows a mixed heating system. The section on the right can

operate ina combined environment of gas-electricityCooling meansThe cooling, in the controlled temperature area, is created by valves withelectric control and with hot-air extractors. In the uncovered part fan groupswith variable or fixed speed have been used.

A r m a t e c V i e r h a u s G m b H

Address Industriestraße 1991710 GunzenhausenGermany

Telephone 0049-9831-5002-0

Fax +49-9831-5002-20

Internet Address www.bystronic-glass.com


Booth Hall 14 E24




02.01.01.02 Cutting technology for laminated safety glass

02.09.02.01 Laminated glass technology with foil for architectural glass



BeschickungAutomatische Beschickungssysteme für den individuellen Bedarf.

Bystronic Beschickungssysteme zeichnen sich aus durch hohe Qualität,Zuverlässigkeit und lange Lebensdauer. Das konsequent angewandteBaukastensystem ermöglicht, je nach Bedarf, die Anwendung vonBeschickungssystemen in verschiedenen Ausführungen:Portal-BeschickungenDie bewährten LösungenKranbeschickungen Flexible Lösungen für jeden Bedarf HydraulischeBeschickungenVielfältige Variationsmöglichkeiten KipptischeUniverselleEinsatzmöglichkeiten





HandlinggeräteArmatec Handlinggeräte zeichnen sich aus durch:- schonenden Umgang mit dem Transportgut- Ergonomie und Sicherheit- minimalen Kraftaufwand für den Bediener- Zeiteinsparung und Kostenreduzierung im ProduktionsprozessEinsäulige LifteGeringes Eigengewicht, starre Lastführung, bis 350 kgZweisäulige LifteGeräte für große, schwere Scheiben, starre Lastführung, bis 1000kgManipulatorenFlexibler Einsatz in verschiedenen Hebezeugen, bis 1600 kgSaugrahmenBasisgeräte für den vertikalen Transport, bis 1500 kgAkku-SaugrahmenAutarke Geräte für den mobilen Einsatz, bis 600 kgÜberkranungenX-Y- Überkranungen und Schwenkkräne in Leichtbauweise



Enter search key:

A s a h i G l a s s C e r a m i c s C o . , L t d .

Address 4-1-23, Shiba, Minato-ku108-0014 TokyoJapan

Telephone 0081-3-5442-9177

Fax 0081-3-5442-9190

Internet Address www.agcc.jp


Booth Hall 13 A55





Bonded RefactoriesAsahi Glass Ceramics Co. Ltd. produces a variety of bonded refractoriesincluding basic burned/unburned bricks, High-alumina burned/unburnedbricks, fireclay burned/unburned bricks, graphite containingburned/unburned bricks and special bricks for steel refining and glassmelting furnaces. We produce a variety of mortar according to the bricksused.

Basic bricks

There are three types of basic bricks: those mainly of spinel, highly puremagnesia clinker, and dolomite.

Applications for glass melting furnace

Magnesia bricksPB-98G, PB-98S, G-MG-95, UB-MMagnesia-zircon bricksMZ-HG, MZ-SGMagnesia-spinel bricksPSB-A3

Applications for cement kilns

Chrome-free bricksBNC-55, BNC-44Magnesia-spinel bricksPSB-A10, HAS-50

Applications for nonferrous metal melting furnaces

Magnesia-chromea bricksNSX-750, CKL-750, MAC-BDS-70, MAC-BD-70




High-alumina bricks

High-alumina bricks consist mainly of an electro-fused material ofcorundum or corundum-mullite.

Applications for glass melting furnace

High-alumina bricksCWK-3, CWR-6

Applications for cement kilns

High-alumina bricksCWK-36

A u t o m a z i o n i I n d u s t r i a l i A l b e r t i n i S . r . l .

Address Via Martinella 92/143010 Alberi di Vigatto / PRItaly

Telephone 0039-0521-397-463

Fax 0039-0521-397-464

Internet Address


Booth Hall 13 E55





Containers overturning system

Pusher- Bars for annealing lehr

Shuttles

Tray forming machine




B a t i s t i M e c c a n i c a S . r . l .

Address Via Pratignone, 1250053 EmpoliItaly

Telephone 0039-0571-921127

Fax 0039-0571-921150

Internet Address www.batisti.it


Booth Hall 14 B09





Drill2 points opposite drilling machine

Lathe Type T1 VVThis machine is for small cuttings on glass and crystal items. The motor CCHP 2 from 0 to 6000 Rpm by a simple rotation of a knob.

The mandrel speed is read with a digital electronic revs counter.

A case with pump for cooling liquid is available upon request.

This lathe is equipped with 5 mandrels, two of which have conical threadsfor stone wheels.

Installed power: 2 HP

Water (per minute): 3 Lt.

Approx. weight: Kgs. 160

Height: mm. 1600

Depth: mm. 1000

Width: mm. 800

Link zu weiterer Information

http://www.batisti.it/cornice.htm

B D F - B o s c a t o & D a l l a F o n t a n a S . p . A .

Address Viale dell' Industria, 4036100 VicenzaItaly

Telephone 0039-0444-286100

Fax 0039-0444-286299

Internet Address www.bdf.it


Booth Hall 14 D71


01.06.01 Gob feeder




01.12.01 Hot end coating


06 Contracting, consulting, engineering


01.06.01 Gob feeder

BDF Feeder1. Mechanisms designed for speed up to 170 cuts/min.

2. Possible applications from 0° to 30° RH and 0° to 90° LH.

3. 360° differential gear on the plunger cam.

4. Shears mechanism with air-spring to improve the cutting motion at highspeed.

5. Shears arm in lightweight aluminium alloy against corrosion.

6. Shears cooling spray system from bottom or from top.




7. Plunger assist with air-spring to improve plunger up and down motion athigh speed.

8. Roller linear guide on the shears linkage for a better motion control athigh speed.

9. Lincoln lubrication on all guide and control systems.

10. Lubrication in oil for the shears mechanism and plunger camdifferential.

11. Shears cams with reduced stroke for high cutting speed.

12. Bevel gear pair type revolving tube mechanism for a better control oftube revolving speed.

13. Fan air cooling in the revolving tube ball bearing.

14. Manual or motor-driven revolving tube height adjustment system ( 130mm ).

15. Revolving tube speed adjustment with brushless motor controlled bythe machine computer.


High Tech 2000 I.S. Maschine BDF - D.G. 6 1/4"BDF, a leading company in the glass industry, now presents its latest I.S.machine model D.G. 6 1/4" to open new prospects in the production ofhollow glass.

Innovation, technology, and versatility make this machine the ideal solutionfor high productivity, improved work surroundings, and considerable energysavings.

The long experience acquired in the design and construction of I.S.machines permits BDF to create the D.G. 6 1/4" in different section number:versions with 6, 8, 10, and 12 sections and 6+6, 8+8 sections (tandem).Blow moulds of a maximum 6 5/8" diameter can be mounted on the I.S.D.G. 6 1/4" machine.

The machine can also be converted into a triple gob model 4 1/4".



Enter search key:

B e d o g n i S o c i e t à C o o p e r a t i v a

Address Via Degli Acciatoli, 350025 MontespertoliItaly

Telephone 0039-0571-902-095

Fax 0039-0571-902-369

Internet Address www.bedogni.it


Booth Hall 13 E19


01.04.03 Smelting technology for tank furnaces



Oxygen- Natural Gas Continous TankIn the last 30 years Bedogni was one of the refering point in the innovationtechnology of glass melting process. One important part of the process isthe combustion and much more the combustion combined with the furnacedesign.After 7 years of experience and many furnace built, we can now presentour complete continous furnace in oxy- fuel combustion system. Thefurnace is completely different from the air- gas furnace for material used,design engeneering, isolation material, combustion and control equipment.




For this reason in the last 7 years we developed many personel andpatented systems.

B e i j i n g T r e n d H i - T e c h I n s u l a t i n g M a t e r i a l s C o . , L t d .

Address Matou Huoxian Town, JongzhouDistrict101109 BeijingChina (Rep.)

Telephone 0086-10-80586925

Fax 0086-10-80581853

Internet Address www.bjtrend.com


Booth Hall 10 B20-F





TDM23HS TDM26HSThe TDM23HS TDM26HS series of IFB are classified by temperature andapplications. Each type is formulated to meet specific thermal and physicalrequirements and after firing is machined to precise tolerances on allsurfaces.TDM IFB are made from high purify refractory clays and other ceramic rawmaterials, these insulating firebricks contain a carefully graded organic fillerwhich is burned out during manufacturing to give a uniform controlled porestructure.

FeaturesLow thermal conductivityGives good thermal insulation, enabling the use of thin-walledconstructions.Low Heat StorageLower heat storage versus dense brick means reduced fuel costs incycli-cally operated heating equipment.High Insulating Value

The light weight and high insulating value of TREND IFB make possiblethinner furnace walls, improved efficiency and lower operating costs.High PurityThe very low iron and alkali flux content confers good refractoriness andthe high alumina content contributes to their stability in reducingatmosphere.Accurate DimensionsBecause TREND Insulating Fire Brick are machined to precise dimensionscourses can be laid quickly and easily. The result is a strongerrefractory lining resulting in less heat loss through the joints.

B e k i n t e x N . V .

Address Neerhonderd 169230 WetterenBelgium

Telephone 0032-9-3657111

Fax 0032-9-3657117

Internet Address www.bekaert.com/bekintex


Booth Hall 12 D20



01.06.16 Aids for the forming of hollow glass



02.04 Forming and bending technology

02.09 Safety glass technology

02.11.08.05 Chemical protection material for glass

04.01.01 Mechanical tools

04.03 Handling tools, hand-guided






Heat-resistant separation materialBEKITHERM® knitted, woven, braided and needle-punched products areused in various applications :

glass bendingcovering material for glass handling toolsas replacement forasbestos and man-made mineral fibresroller coverings for the glass andaluminium industryhigh-temperature sealsBEKITHERM® products are used in production processes where resistanceto both high temperatures and mechanical loads is required.

In the production of complex glass forms and stainless steel cooking pans,BEKITHERM® fabrics are used as separation cloth between the glass ormetal and the mould. It provides a cushion and prevents optic defects.

Advantages : it is a combination of :

heat-resistance (700 °C and more)softnessflexibilitydurabilityenvironmentalfriendlynesseasy to affix (can be welded, sewed,...)easy to shape

B e l g i u m G l a s s E q u i p m e n t s . a .

Address Rue Raphael 195060 FalisolleBelgium

Telephone 0032-71-266-232

Fax 0032-71-266-233

Internet Address www.bge.be


Booth Hall 13 C71



01.05.03 Casting and rolling technology



03.01.07 Wired glass

03.01.08 Figured glass / Profiled architectural glass




Suspended Top RollersSUSPENDED TOP ROLLERS

The top rollers, which are also called attenuators, are by far the machineswhich contribute the most to forming the glass ribbon. They are located bypairs on each side of the bath. The number of top rollers depends on theline daily output and on the type of glass to manufacture.

Link zu weiterer Informationhttp://www.bge.be/bge.aux/bge-web.htm


annealing lehrbgehas a long experience of the design and the installation of the mechanismof the annealing lehr. The mechanism includes adjustable rollers, fixedrollers, laid rollers. The electrical driving equipment can be included in thebge's scope of supply.During cold repairs, bge designs and realizes the modifications andcomplete overhaul of the drive.

B e n e q O y

Address Ensimmäinen Savu01510 VantaaFinland

Telephone 358-9-759953-0

Fax 358-9-759953-10

Internet Address www.beneq.com


Booth Hall 12 A45





01.11.01 UV-Absorption-Coating (pyrolytic)

01.11.02 IR-Reflective Coating (pyrolytic)

02.06 Coating technology

02.06.01 Vacuum coating equipment


02.06.03 Mirror coating equipment

02.06.04 Metallizing machines


02.06.06 UV-Absorption - Coating (pyrolytic)


02.06.09 Mirror coating products

03.11.01.04.04 Nano coating technology

03.11.03.01.06.02 Coating of automotive glass

03.11.03.01.06.03 Coating of flat glas



Production of solar control surfaces on glassnHALOTM is used to add solar control properties to soda-lime-silica-glass.In the process, glass substrates at elevated temperatures are coated withnanosized particles. These particles migrate into the glass matrix and buildor modify the existing vitreous network. The altered network and its additivebuilding blocks change the transmission spectrum of the glass. Theproperty cannot be physically removed from the surface, as it is embeddedin the glass matrix.



Enter search key:

B e r n a r d e t B o n n e f o n d S . A .

Address ZA du Allee Mathieu Murgue, PlateaudesForges Terrenoire42100 Saint EtienneFrance

Telephone 0033-4-77953-000

Fax 0033-4-77957-806

Internet Address www.bernardbonnefond.com


Booth Hall 13 B12





VarivoltOn load stepless variable voltage transformer.Technical performances:

LV or HV primary voltage.Galvanic insulation between primary andsecondary windings.Linear, on load voltage variation.No DCcomponent.Friendly simplified interface with supervisory systems.100 %custom made equipment.




B H - F ( E n g i n e e r i n g ) L t d .

Address 4A Churchward, Southmead ParkOX11 7HB Didcot, OxfordshireUnited Kingdom

Telephone 0044-1235-811111

Fax 0044-1235-817676

Internet Address www.bh-f.com


Booth Hall 13 C71


01.04.02 Forehearth technology

01.06.01 Gob feeder



400 SeriesBH-F s success and experience in introducing major improvements

in forehearth technology has now highlighted the need to bring

better performance to another key area of glass manufacture: the

working end. It is time to look critically at the assumptions

behind working end design.

The answer, BH-F s new 400 Series Working End, represents another

large step forward. In this new design the working end is no

longer regarded as a simple glass reservoir, but rather as a

distributor with the capacity and capability to both condition

and control glass temperature at the earliest possible moment.

With the addition of the 400 Series Working End,

BH-F now offers an integrated system, from throat to forming machine,

to take account of all your production needs.

Streamed Flowpaths

In place of the conventional working end designs,

the 400 Series distributes the glass to any number of

forehearths over a range of tonnage pulls with minimum problems.

corners are designed out and flow paths are streamlined,

overcoming difficulties associated with pull variations

and glass areas which can cause glass quality problems.

Forehearths entrances are designed to help move all the glass

and maximise the residence time which is a prime consideration

on the working end sizing. The cross section of glass flow is

designed to achieve gradual change in glass velocity and

improve heat penetration and temperature homogeneity.

Temperature Control

The design of conventional working ends often makes no allowance

for the different temperature profiles and flow paths needed for

different tonnages on a line, or between adjacent forehearths.

In the conventional designs with sometimes just one temperature

control point, glass conditioning for individual channels does not

begin until the molten glass reaches the forehearth.

The 400 Series Working End allows for the earliest possible

conditioning of glass temperature bringing the advantages of the

400 forehearth back into the working end.

Zoning of the working end prior to individual forehearth entry

gives more control over temperature for different pulls.

Multiple burners, as with the forehearth, heat the side walls

evenly and gradually for better homogeneity of temperature.

Insulation is graded to the highest level for overall energy

saving consistent with heat loss requirements at high pulls.

And the unique centre line cooling can be brought in (automatically)

as necessary to further assist in reducing the temperature The profiled roof(again in monobloc form even up to 60" channel widths)

gives optimum radiation exchange in the combustion (side)

and cooling (centre channel) zones all under automatic control.

Simplified Construction




The whole working end is built into a steel casing which can be

easily adapted to various furnace throat constructions.

Assembly is simple and rapid, the result is neat, tidy and serviceable andwith lower ambient temperatures. In some cases the access space hasbeen used to increase furnace area.

The control and combustion systems are readily incorporated with

existing furnace and forehearth equipment.

The Options

The 400 Series Working End can be designed and constructed to suit

most furnace and line layouts. And with BH-F s automatic temperaturecontrol systems, the Working End can be easily adapted to take fulladvantage of its superior control, whilst minimising operator involvement.

The Backup

BH-F s advanced computer aided design facilities enable us to make fastand accurate proposals covering all aspects of the glass manufacturingprocess, from throat to forming machine.

Our design teams ensure that customers get the equipment and

materials which best suit their own particular production

requirements, with swift and precise assessment of performance.

In the field, our engineers operate worldwide to install and commissionequipment, earning a reputation both for technological expertise and forservice. BH-F encourages customers to arrange follow-up visits after aperiod of operation to ensure installations are performing to the highstandards demanded of all BH-F equipment.

A training engineer is available to train your operators

in all aspects of working end set up, operation and maintenance.

With our track record of technical innovation, expert consultancy

and technical support, BH-F provides a unique level of service to glass.

B i l l c o M a n u f a c t u r i n g , I n c .

Address 100 Halstead Blvd.16063-9799 Zelienople, PAUSA

Telephone 0001-724-452-7390

Fax 0001-724-452-0217

Internet Address www.billco-mfg.com


Booth Hall 13 D30-1


01.10.01 Optimization of glass cutting and glass production yield

01.12.03 Strengthening coating

02.01.01 Cutting technology

02.05.02 Laser-marking technology

02.08 Insulation glass technology

02.09.02 Laminated glass technology

02.10.01 Washing machines and equipment

02.13.02 Software



Enter search key:




B o c k E n e r g i e t e c h n i k

Address Gösen 1592685 FlossGermany

Telephone 0049-9603-1295

Fax +49-9603-2995

Internet Address www.bock-energietec.de


Booth Hall 13 A45


01.04 Glass melting technology



01.04.06 Recuperative systems


01.09 Kiln technology


01.09.04 Decorating lehrs


05.01 Measurement and control technology, sensoring

05.01.01 Measurement and control

05.01.01.01 Measurement and control of glass position detection

05.01.01.05 Measurement and control of glass temperature

05.01.05 Control and automation technology

05.03 Host computer systems

05.03.01 MRP / CAD / CIM systems

05.03.02 Inspection, protocolling and diagnostic systems

05.03.04 Process control systems




Glasschmelzöfen für spezielle GlasherstellungLeistungsbereich30 300 kg pro TagErfahrung und Technologie aus den Großanlagenbereich, übersetzt aufkleinere Anlagen, ist das Konzept für eine Vielzahl von elektrischenGlasschmelzöfen.

Diese Öfen zeichnen sich aus durch:

Gute GlasqualitätFlexible ProduktionsmöglichkeitenGeringer EnergieverbrauchHohe BetriebssicherheitAngenehme Arbeitsbedingungen (keine Lärmbelästigung)Einfache BedienungUmweltfreundliche Betriebsweise (kein Kamin)

B o n a i t i P i e t r o s . n . c .

Address Via Pergola, 523900 LeccoItaly

Telephone 0039-0341-362357

Fax 0039-0341-285546

Internet Address www.pietrobonaiti.com


Booth Hall 13 E59





Bucket Wire Link Belts




with welded edges, flat and round wire spirals, woven alternately left andright, undulated cross members, available mounted on chain with 1" and 50mm- pitch of spirals 5 mm- distance between centers of cross members 14 mmdiameter of cross members 1.5 mmdiameter of spiral wire 1.2 mmAPPLICATION:Food industry, small metal parts industry.

B o s c h R e x r o t h A G , V e r t r i e b u n d M a r k e t i n g , A n t r i e b s t e c h n i kZ a h n k e t t e

Address Zur Dessel 1431028 GronauGermany

Telephone 0049-9352-18-0

Fax +49-9352-18-1812

Internet Address www.boschrexroth.com


Booth Hall 14 A24




01.10 Cold end technology for float glass, laminated glass, wired glass and other typesof flat glass



01.13.03 Conveying, sorting and storage facilities






PneumaticWith its pneumatic, electronic and electropneumatic components andsystems for the automation of machines and production equipment, thepneumatics business unit offers a wide range of standard products andcustomer-specific solutions.


Inverted-tooth chains for driving and conveyingInverted-tooth chains are used in a wide range of applications.

This results from a multitude of standard components that can beindividually configured to create a customer-specific system solution.

That is why there is almost no industry where inverted-tooth chains do notprove their cost-effectiveness on a daily basis.

Silence, functional reability, and a long service ife are some of the attributesof inverted-tooth chain drives.

Besides the tooth form and special link construction on the chains,sprockets also make a considerable contribution to the system s excellentrunning properties and are tailored to the needs of the customer.

Modern-day machinery production requires drives to offer a high degree ofcost-effectiveness, precision and reliability.

Small dimensions, high efficiency, and easy assembly are additionalrequirements that have to be met.

Rexroth s inverted-tooth chain drives meet all of these requirements.

This is made possible by a unique 2-part rolling pivot joint and the specialmeshing of the inverted-tooth chain and sprocket. This special design isincluedd in all of the pitches and models that are currently available.

Inverted-tooth chains are used for classic circuit operation. Due to theirtechnical advantages, they are also the perfect solution for drives withshafts that run in counterrotation or for reversing-operation drives.

Inverted-tooth chains are also used as couplings. In this case, they fall inthe category of flexible shaft couplings.




The wide variety of application options is extended by the use ofhigh-quality material that lets the chain withstand temperatures up to 450°C, as well as by stainless steel versions.

Inverted-tooth chains for conveying and linkage systems provide optimumconveyor-belt systems.

They offer the best option for conveying your workpieces. Feeder andstorage systems are also important components within automatedproduction lines. Individual adjustment of workpiece pallets, protectingworkpieces from vibration, and gentle conveying, even during accumulationoperation, are just a part of the overall requirements that a conveyingsystem must conform to.

Inverted-tooth conveyor chains from Rexroth work slip-free and carry everypart to the right station at the prescribed time. The workpieces rest eitherdirectly on the chains, on pallets, or on carrier driver that have beenspecially integrated into the chain, depending on the type and shape of theworkpiece.

B V D P E C E s p o l . s r . o .

Address Podlesí 103360 01 Karlovy VaryCzech Republic

Telephone 420-353-449-238

Fax 420-353-449-237

Internet Address www.bvd.cz


Booth Hall 10 A29








BVD 3700 KCOur company offers you a variety of chamber kilns for glass manufactureswith manual glass production. The kilns are delivered in a currentconstruction design. They distinguish by a low energy consumption, easyoperation, reliable running and uniform heat distribution in the whole kilnspace.

B Y C R o l l m a k e r s a D i v i s i o n o f C o p e E n g i n e e r i n g ( R a d c l i f f e )L i m i t e d

Address Sion Street WorksM26 3SF Radcliffe, ManchesterUnited Kingdom

Telephone 0044-161-723-6500

Fax 0044-161-723-6501

Internet Address www.byc-rollmakers.co.uk


Booth Hall 13 B32



01.05.02 Glass drawing technique






Rolls for the float glass industry




BYC has been involved in the manufacture of rolls for the float glassindustry since 1962.

The supply of lehr rolls for float glass lines to Pilkington plc., whosetechnology leads the world, involved BYC at a very early stage.

Over the years the design of these rolls has evolved with the relentlesspursuit of quality.

BYC's expertise has continually developed and today its world-widecustomer base is testimony to a dedicated approach.

BYC is one of only a few companies throughout the world with thecapability to manufacture these rolls.

The majority of lehr rolls are produced from spun stainless steel tube,typically up to 7.50 metres in length.

The long bed lathes and grinders at BYC are equipped to handle such largeparts. Lift-out and lehr rolls are generally fabricated from 25/20, 18/8 or25/4 stainless steel.

Towards the cooler end of annealing lehrs, other materials are sometimessubstituted for stainless steel to produce rolls.

BYC has facilities for manufacturing rolls clad in composite heat resistant,non asbestos materials.

Tyred or ring rolls (donut rolls in the USA) are another variant sometimedfavoured as a means of dissipating heat.

BYC also produces conveyor rolls.

B y s t r o n i c M a s c h i n e n A G

Address Industriestrasse 54922 BützbergSwitzerland

Telephone 0041-62-9587777

Fax 0041-62-9587676

Internet Address www.bystronic-glass.com


Booth Hall 14 E24





02.01.01.01 Cutting technology for float glass


02.01.03 Devices for coating removal

02.01.04 Snapping techniques

02.03.01 Grinding techniques for flat glass

03.03 Automotive glass


Ausstellerdatenblatt

Service Linksnach obenDatenschutzNutzungsbedingungenSeite druckenSeiteempfehlen © Messe DüsseldorfMehr InformationenSuchfunktionSuchen Sie News, Aussteller, Produkte oder Infos zur Messe?

Suchwort eingeben:

Ausstellerdatenblatt


Suchwort eingeben:




Exhibitor Data Sheet


Enter search key:

C . R E . F . I N . S . r . l .

Address Via E. De Filippo, 2930038 SpineaItaly

Telephone 0039-041-931246

Fax 0039-041-5410716

Internet Address www.crefin.it


Booth Hall 13 A72




01.04.04 Smelting technology for pot furnaces



ManutenzioneC.RE.F.IN. S.r.l. è in grado di svolgere attività manutentive, in tutte le areegeografiche, compreso il global-service con o senza gestione diretta deimateriali di impiego. Siamo da subito disponibili a collaborare perindividuare, sotto la Vs. Direzione Tecnica, le migliori soluzioni mirantiall'unificazione dei ricambi per il contenimento delle giacenze prontoimpiego ed alla formulazione dei piani operativi nell'ambito della

manutenzione preventiva, conservativa e correttiva.La società C.RE.F.IN. S.r.l., qualora richiesto, dichiara la propriadisponibilità a partecipare con i Vs. tecnici alla verifica del patrimonioinstallato negli impianti per meglio caratterizzare l'ipotesi del pianomanutentivo.

C a r b o n e L o r r a i n e C o m p o s a n t s S . A . S .

Address 41, rue Jean Jaurès92230 GennevilliersFrance

Telephone 0033-1-418544720049-211-947-1007

Fax 0033-1-418545110049-211-947-1008

Internet Address www.carbonelorraine.com


Booth Hall 13 C08



01.06.01 Gob feeder


01.06.12 Moulds for glass production

01.06.15 Spray Systems for gob forming



01.12 Coating technology for hollow glass










CARBON/CARBON COMPOSITESCarbon/carbon composite materials are especially used in aircraft brakingsystems.Their light weight allows them to save fuel. Maintenance costs are reduced,thanks to their resistance. They are secure, whereas they absorb theenergy released during an emergency braking sequence (an Airbus movingat a speed of 320 km/h has to stop over a distance of 1200 m), whileoperating perfectly at over 1600° C.


Hot Handling equipmentCarbone Lorraine is at the heart of glass manufacturing processes.Traditional methods (manufacturing bottle, and color-TV tubes ) :hot-handling equipment made of graphite.



Enter search key:

C a r - M e t S . p . A .

Address Via Cavour, 931010 Cimetta / TVItaly

Telephone 0039-0438-794784

Fax 0039-0438-795320

Internet Address www.carmetspa.it


Booth Hall 14 E70



01.04.08 Combustion technology








02.09.01 Pre-tempering technology

02.09.01.01 Furnaces for thermal pre-tempering of glass

02.09.01.02 Furnaces for chemical pre-tempering of glass



TAPE LENGTH: 3.000 mm





BELT LENGTH: 3800 mm.Heating recovery in differentiated counter-current

C a s s o - S o l a r C o r p o r a t i o n

Address 230 U.S. Route 202, P.O. Box 16310970 Pomona, NYUSA

Telephone 0001-845-354-2500

Fax 0001-845-362-1856

Internet Address www.cassosolar.com


Booth Hall 13 D30-4










02.09.02.02 Laminated glass technology with foil for automotive glass



DUO-TUBE TM QUARTZ HEATERS - GOLD and WHITENO REFLECTORS REQUIRED

The Casso-Solar Duo-Tube TM is available with a dual coat integral goldreflective coating or an integral white refractory that directs the infraredenergy to the product without the need for external reflectors. Both the goldcoating and the white refractory provide for maintenance free service. Thegold is the most efficient reflective material for all infrared energy, as it willnot oxidize like most other metallic reflectors and is recommended forapplications for extended heater life with heater temperatures of up to 1400deg F. The white refractory, although slightly less efficient than the goldcoating, will provide a wider emission spectrum and is suitable for extendedlife applications with heater temperatures of up to 1750 deg F. Heaters aremaintenance free through out their entire life span.

Link zu weiterer Informationhttp://www.cassosolar.com/download/P106%20DuoTube.pdf

C E R H E C C e r a m i c a n d H e a t i n g E l e m e n t s C o m p a n y

Address 723 rue de Longues Rayes, Zac desLongues Rayes60610 Lacroix St OuenFrance

Telephone 0033-3-4423-3925

Fax 0033-3-4436-7006

Internet Address www.cerhec.com


Booth Hall 13 D32




01.05 Forming for flat glass




1- heating elements for industrial furnaces




strip and wire, NiCr & FeCrAl

according your need, new or spare parts

2- heating bodies up to 1400°Call shapes on request. rigid, without fiber, easy to install

3- located heating & heating handhigh technical level for complex glass shaping. Please,contact us.

4- machinable ceramic USINITelectrical insulator, 1300°C max, contact with hot glass.

6- ceramic supports for heating elements

ceramic tubes : diameters 12/8; 16/10; 20/10&13; 25/15&17; 30/20;36/26;40/30; ...up to 80 on stock

quick delivery.

Link zu weiterer Informationhttp://www.cerhec.com

C e s t a r o S . n . c .

Address Strada Torino, 5410040 Cumiana di Cumiana / TOItaly

Telephone 0039-011-9058816

Fax 0039-011-9070333

Internet Address www.cestaro.ce.it


Booth Hall 13 E18





POLIMAT/MC




Features and performancesThanks to its features, POLIMAT/MC is also suitable to dose and feedPOLIMAT/MC is an innovative proportional dosing system, completelyoperated through computer, able to make solutions-emulsions at arigorously constant concentration. The computer controls each operationand signals every possible anomaly.Thanks to its features, POLIMAT/MC is also suitable to dose and feedPOLIMAT/MC is, at present, the most interesting proposal to feed sprayingsystems for superficial treatment of glass containers (cold-end).Thanks to its features, POLIMAT/MC is also suitable to dose and feedThanks to its features, POLIMAT/MC is also suitable to dose and feedproducts used in shears lubrification (cutting-gob).

C h a n g s h u J i a n h u a D i e S e t s C o . , L t d .

Address Shajiabang Town, Changshu City215 559 Jiangsu ProvinceChina (Rep.)

Telephone 0086-517-5250-1807

Fax 0086-512-5250-0838

Internet Address www.jhmould.com


Booth Hall 10 B19-D





Blank mould of drink bottlename: M 1230material: JH 4

Mould for cupname: CP-312material: SUS431

C h a n g s h u J i n g G o n g M o u l d M f g . C o . , L t d .

Address East of Shajiabang215559 Changshu, Jiangsu ProvinceChina (Rep.)

Telephone 0086-512-5250-6563

Fax 0086-512-5250-2888

Internet Address www.csjg.com


Booth Hall 13 E52








Series of mould bererage bottle

Three-part glass bowl mould

C h i n a S t a r l i g h t R e f r a c t o r y C o . , L t d

Address Yunhe Industrial Zone, HuoxianTown,Jongzhou District101109 BeijingChina (Rep.)

Telephone 0086-10-8058-7751

Fax 0086-10-8058-7551

Internet Address www.csrazs.com


Booth Hall 10 B20-E





AZS41AZS41# is the highest zirconium-dioxide content AZS type fused castrefractory material produced by our company class containing 41%ZrO2.AZS41# offers the highest corrosion resistance to molten glassamong the AZS refractories and shows minimal contamination to moltenglass. It is used in the most exposed parts of glass melting furnaces.

Typical Applications:ThroatsDamBubbling bricksCorner bricksElectrode sidewall and bottom blocksDoghouse and hot zone sidewall blocks

Available Casting Techniques:End castingVoid free

- - block is a dense, fused cast refractory containing approximately 45%alpha alumina, 55% beta alumina, and a minor amount of silicate boundaryphase. The intergrowth of crystalline phases and low interstitial glassboundary phase increase the structural stability of Alpha-Beta under load athigh temperature. It offers excellent corrosion resistance and low defectpotential in the conditioning or refining end of a glass melting furnace. Thatit is very suitable for paving blocks and forehearth channel blocks.

Typical Applications:Glass furnacesPavingSuperstructuresRefiner SidewallsChannelsCrowns

Available Casting Techniques:Normal castingVoid free




C i m e c O y

Address Lastikankatu 333730 TampereFinland

Telephone 358-3-213-1575

Fax 358-3-213-1577

Internet Address www.cimec.fi


Booth Hall 14 E15





ErgoLevel Glass LifterNTe Glass Lifter

- pneumatically powered glass lifter equipped with two-speed lifting andtilting

Equipped with ErgoLevel Control arm ==> permanent height of the controlpanel and handles

Extremely suitable for continuous work.

Ergonomic Glass Lifters

NT Glass Lifter

- pneumatically powered glass lifter equipped with two-speed lifting andtilting

- endless rotation around suspension

- endless rotation of the gripper

NTT Glass Lifter

- pneumatically powered telescopic glass lifter equipped with two-speedlifting and tilting



- extremely suitable for lifting jobs in low room that cannot be performed bytraditional lifters

NV Glass Lifter

- pneumatically powered glass lifter equipped with two-speed lifting



Lifting capacities 150 - 400 kg

The Cimec ergonomic Glass Lifter allows you to work with one man onlywithout risking the user s health even when lifting very big glass sheets.

By means of Cimec multi-function Control Arm you can utilize the entireloading area from one side only thus avoiding the additional turnings of theglass.

Link zu weiterer Informationhttp://www.cimec.fi

Glass Lifter for Heavy IG-unitsNVer Glass Lifter

- pneumatically powered glass lifter equipped with two-speed lifting.

- pneumatically operating Edge Support - NO SLIDING

- up to 400 kg

- one person operation

The new lifter is equipped with pneumatically operating supports which willprevent sliding of the glass sheets while lifting IG-units from a productionline. Handling of the fresh IG-unit has always been difficult and dangerousoperation and due to growing glass sizes and thicknesses it has becomeeven more difficult. This problem can be solved now by this New IG-lifterwhich suites for different types of production lines. The lifting device has




been developed together with our customers to fulfill their requirements.

Link zu weiterer Informationhttp://www.cimec.fi/news.htm

C N U D - E F C O

Address Boulevard de l'Humanité, 116/31070 BrusselsBelgium

Telephone 0032-2-5290-200

Fax 0032-2-5234-336

Internet Address www.cnud.com


Booth Hall 13 F49






Annealing and Decorative LehrsKnow-How43 years expertise in hollow glass annealing and decoratingTrainingProcess optimizingMain CharacteristicsWidth range: from 0.6 m till 5.4 mStandard widths: 1.2 m, 1.5 m, 1.8 m, 2.1 m, 2.4 m, 2.7 m, 3.0 m, 3.3 m,3.6 m, 3.9 m, 4.2 m, 4.5 m, 4.8 m, 5.0 m, 5.1 m, 5.4 m.Height: from 400 mm to 700 mm.

Modular design- easy and fast transport and assembling- easy to upgrade- low power consumption- low maintenance cost

Process control (heating and cooling)- fully automatic- "drift"

High performing circulating turbines- forced air convection- very fast heat exchanges

Direct Heating (electricity or gas)Indirect Heating (gas or oil)

Direct Cooling- injection of ambient air, mixed with circulated air- automatic removal of excess air

Performing solvent exhausting system (decorating lehrs)

Flat Glass Annealing lehrsKnow-How43 years expertise in flat glass annealingOwn scientific computer and CAD networkProcess optimizingLehr personalizing (adapted to each customer's specifications)Main CharacteristicsProduction capacity

- float glass: from 25 to 900 metric tons a day- figured and wired glass: from 30 to 200 metric tons a day

Width range:- float glass: from 2600 to 5700 mm (ribbon width)- figured and wired glass: from 1700 to 3200 mm (ribbon width)

Thickness range:- float glass: from 0.55 to 24 mm

All-metal modular designLow power consumptionFully automatic process control

- digital controllers, microprocessors or computer to control thetemperature

- proportional control of heating and coolingGreat flexibility of operationElectrical heatersCooling

- indirect heat exchangers, with possibility to recover heat- direct convection on glass with temperature-controlled hot air- direct convection on glass with air at ambient temperature




C O G N E X C o r p o r a t i o n

Address One Vision Drive01760 Natick, MAUSA

Telephone 0001-508-650-3300

Fax 0001-508-650-6383

Internet Address www.cognex.com


Booth Hall 15 D07


01.10.03 Inspection systems



Cognex SmartViewCognex SmartView ® surface inspection systems enable you to detect,identify, and visualize defects on the surfaces of products that aremanufactured in a continuous fashion such as metals, paper, plastics, andnonwovens.In today's highly competitive marketplace, increasing demands are beingplaced on manufacturers to improve efficiency and increase productivity. Asyou run your lines at faster speeds, you consequently risk an increase inthe occurrence of defects. You need a cost-effective solution that providesyou with the maximum return-on-investment.Cognex can meet your needs.With over 20 years of experience in challenging machine visionapplications, Cognex uses the right combination of lighting, imageacquisition, and image processing software to suit your application. OnlyCognex's advanced inspection technology ensures real-time detection ofdefects on your strip or web surfaces, while our special surface inspectionsoftware can be easily configured to provide unparalleled, automaticidentification and visualization of your surface defects.

C o n t r o l & H e a t i n g - S y s t e m s , D i p l . - I n g . R a i n e r P i l z

Address Sankt-Albans-Weg 8A34587 FelsbergGermany

Telephone 0049-5662-9472-0

Fax 0049-5662-9472-22

Internet Address www.ch-systems.de


Booth Hall 14 B14










Einstufige BrennerEinstufige Brenner

Die zur Verfügung stehenden Brenner der Dreizler GmbH wurden

speziell für den Einsatz im Bereich Glas und Keramik abgestimmt und mithochwertigen Werkstoffen ausgerüstet, so dass sie den schwierigen undteilweise widrigen Einsatzbedingungen an Kühlbahnen, Kühlöfen,Auftreibtrommeln und Studioöfen gerecht werden.

Unsere Brenner sind leicht zu installieren, zu bedienen und extrem

wartungsarm. Der spezielle Düsenaufbau gewährleistet einen stabilen undsuperleisen Betrieb, weshalb sie auch für den Einsatz in Schauhüttengeeignet sind.

Eigenschaften

- unterschiedliche Leistungen




- umweltfreundlich

- kompakt

- wartungsarm

- geräuscharm

- servicefreundlich

- vielfältiges Zubehör

- Standard- oder Spezialflammrohr

- mit Standardstecker, Klemmleiste

oder Industriestecker

Link zu weiterer Informationhttp://www.ch-systems.de



Suchwort eingeben:

D a l i a n B a o l i C o l o r G l a s s C o . , L t d .

Address Yaojia Village, Nanguanling Street116100 Ganjingzi District, DalianChina (Rep.)

Telephone 0086-411-8688-7020

Fax

Internet Address www.baolistainedglass.cn


Booth Hall 12 E42





Ring mottles glassIt is an opalescent glass in which the rates of crystal growth have beencontrolled to create ring-shaped areas of opacity. The effect is a visualsurface mottling.

D a t a p a q G m b H

Address Valdorfer Straße 10032602 VlothoGermany

Telephone 0049-5733-9107-0

Fax +49-5733-9107-27

Internet Address www.datapaq.de


Booth Hall 12 B42




05.01.02 Measurement, control and inspection technology






Tempern und Verbinden von Bildschirmen und GlaskolbenBeim Tempern und Verbinden von Bildschirmen undGlaskolben sollte im gesamten Prozess und über das gesamteKühlofenband eine gleichmäßige Temperatur herrschen. Es istsicherzustellen, dass die Schmelztemperatur des Glaslots innerhalb derSpezifikation liegt und am äußeren Rand des Bildschirms gleichmäßigeTemperaturen erzielt werden. Außerdem ist zu gewährleisten, dass in denKühlzonen die kritischen Abkühlungsgeschwindigkeiten eingehaltenwerden.

Was bedeutet Profilaufzeichnung ?

Datapaq ermöglicht mit seinem Temperaturmess-System für Kühlöfen dieAufzeichnung von präzisen und umfassenden Temperaturprofilen IhrerBildschirme und Glaskolben während sie sich im Ofen befinden. Durch dieregelmäßige Temperaturüberwachung können Sie korrekteProzessbedingungen schaffen und somit Probleme und Ausschussvermeiden.

Das System von Datapaq umfasst einen programmierbaren Datenlogger,einen Hitzeschutzbehälter aus hochwirksamem Isoliermaterial,Thermoelemente zur Erfassung der Produkttemperaturen und dieInsight-Analysesoftware.

Um die tatsächliche Produkttemperatur während des Prozesses zuüberwachen, durchläuft das System zusammen mit dem Produkt den Ofen.Die gespeicherten Daten können anschließend mit Hilfe derInsight-Software analysiert und zur Optimierung der Temperaturprofileherangezogen werden. Mit dem telemetriefähigen Furnace-Tracker-Systemhaben Sie die Möglichkeit, sich die erfassten Temperaturwerte in Echtzeitanzeigen zu lassen. Noch nie war die Aufzeichnung vonTemperaturprofilen so einfach wie heute. Und falls Sie Fragen haben, hilftIhnen unser Service- und Supportteam gerne weiter.Vorteile:

Gewährleistung einer gleichmäßigen Produkttemperatur über das gesamteKühlofenbandEinhaltung der Spezifikation hinsichtlich derSchmelztemperatur des GlaslotsGewährleistung gleichmäßigerTemperaturen am äußeren Rand des BildschirmsEinhaltung der kritischenAbkühlungsgeschwindigkeiten in den KühlzonenErkennung heißer undkalter Stellen im Ofen bzw. Feststellung einer ungleichmäßigenTemperaturverteilungAusdruck von Protokollen zuQualitätssicherungszwecken

D e R a e d t I n d u s t r i a l F a n s

Address Parc Industriel du Monceau4130 TilffBelgium

Telephone 0032-4-228-8585

Fax 0032-4-228-8584

Internet Address www.deraedt.be


Booth Hall 13 F30


01.03.10 Ventilation systems



Industrial FansIf you need Industrial fans in your installation, we can then help you thanksto our large range of fans. Indeed, all our Fans are high quality equipment,which were developed following new methodology and stringent standardsto offer a high quality equipment with large performances. This newapproach guarantees you a very high quality product at a attractive pricewithin a short délivery time.

Our fans are composed of many ranges with different aeraulicalcharacteristics. Together these ranges have total pressures going to 5000daPa and 100 m³/s flow for a maximal temperature of fluid of 800°C.

Moreover these fans can be delivered with a whole range of options.




D M A M a s c h i n e n - u n d A n l a g e n b a u G m b H & C o . K G

Address Eugen-Diesel-Straße 837671 HöxterGermany

Telephone 0049-5271-9706-0

Fax +49-5271-9706-99

Internet Address www.dma.de


Booth Hall 14 C57







Glass and BeverageDMA Fördertechnik supplies complete lines for the "Cold-End-Area" incl.PLC-control for the glass industry.

The product range includes:

- Rinser for PET and glass bottles.

- Glass- and bottle inverter

- Conveyors for bottles

- Conveyors for crates and cases

- Vertical Side grip Conveyors

- Slat band chain conveyors

- Compl. line control system

1. Bottle inverter/rinser

2. 2-row stacker incl. packaging table

3. No pressure liner


Förderanlage

D o w C o r n i n g G m b H

Address Rheingaustraße 3465201 WiesbadenGermany

Telephone 0032-6488-9207

Fax 0032-6488-8950

Internet Address www.dowcorning.com

EMail

Booth Hall 10 B69


01.01 Raw material for glass production

02.08.06 Sealing techniques


02.11.04 Sealants

02.11.08 Chemicals

03.02.03 Insulating glass

03.04 Solar technology

03.04.01 Photovoltaics

03.09.03 Curtain wall elements / systems

03.09.03.06 Curtain wall elements (general)

03.09.08 Window constructions




03.09.10 Frame profiles

03.09.11 Parting walls in glass

03.10.01 Structural glazing

03.10.01.02 Structural glazing (general)

03.11.01.01.05 Fire protection

03.11.01.04.01 Sealants and adhesives


03.11.01.07 Sealants,adhesives and insulation materials.

03.11.03.01.06 Surface coating materials


03.11.03.02.02 Bonding technology

04.10 Adhesive technology

05.01.01.02 Measurement and control of viscosity



Enter search key:


Enter search key:

D r . G o l d & C o . K G

Address Königsallee 7240212 DüsseldorfGermany

Telephone 0049-211-3205-18

Fax +49-211-1314-65

Internet Address www.dr-gold.de


Booth Hall 11 A29





Carrymate PlattenträgerPlattenträger zum kraftsparenden Transport von Glas, Holz- undSpanplatten, Blechen, Isolier - und Gipskarton, beschichteten Platten,Trennwänden, Bauelementen, Türen, Fenster etc.

* Spannweite 0 - 80 mm

* Robuste Aluminiumkonstruktion

* Selbstjustierendes Klemmsystem

* Traglast pro Griff 100 kg

* Paarweise im Karton

* Garantiert rutschfest im ganzen Spannbereich

Auch in den Spannweiten 40 - 120 mm und 80 - 160 mm lieferbar!

Link zu weiterer Informationhttp://www.dr-gold.de/index_de.php?load=data/de/carrymateplattentraeger.php

Carrymate Portman




Zum Heben, Senken, Schwenken von Glastüren etc.

* robust gebaut

* für Elemente bis 120 kg

* mit integrierter Neigungsausgleichsschiene

Link zu weiterer Informationhttp://www.dr-gold.de/index_de.php?load=data/de/portman.php



Suchwort eingeben:

D S F R e f r a c t o r i e s & M i n e r a l s L t d .

Address Friden, NewhavenSK17 0DX Nr Buxton, DerbyshireUnited Kingdom

Telephone 0044-1629-636271

Fax 0044-1629-636892

Internet Address www.dsf.co.uk

EMail

Booth Hall 12 B36





Chemcast Frisil A1DSF Chemcast Frisil A1 is a low iron fired sillimanite refractory produced byethyl silicate casting. It can be produced in complex shapes and has goodresistance to chemical attack and thermal shock. Chemcast Frisil A1 hasmany applications in the glass industry including forehearth superstructure,burner blocks and float glass tin bath roof tiles.

Chemcast Frisil HDSF Chemcast Frisil H is a high quality fired sillimanite material whichexhibits excellent creep and thermal shock resistance. Used extensively inforehearth construction as roof and burner blocks, it is entirely suited to awide range of glass manufacturing environments including container,tableware, lighting and fibre glass. It can also be used in glass contactchannels and complex regenerator and recuperator shapes.

D y s o n T h e r m a l T e c h n o l o g i e s ( P r e c i s i o n C e r a m i c s )

Address Dewsbury Works, EarlsheatonWF12 8BU DewsburyUnited Kingdom

Telephone 0044-1924-468-201

Fax 0044-1924-459-429

Internet Address www.dysontt.com


Booth Hall 13 F03






Firebricks




Dyson Thermal Technologies offer firebricks for an extensive range ofapplications. These include:

Lower Regenerator Walls (Glass).Upper Wall Back Up (Glass).Rider arches where loading is not severe (Glass).Flues.Furnace and Kiln working linings.High Temperature Furnace safety linings (Steel and Non Ferrous).Reduction Cells in Aluminium industry.SDS - FIncorporating low iron, pre-calcined dense grain materials, this product isformulated to provide high strength, high abrasion resistance, low porosityand high refractoriness combined with a high resistance to glass furnacecarryover vapours and solids.

SDR - FA dry pressed high strength abrasion resistant firebrick product with gooddimensional tolerance. SDR-F is a high performance firebrick which findsapplication where resistance to glass furnace carryover in solid or vapourforms is required.

E c l i p s e , I n c .

Address 1665 Elmwood Road61103 Rockford, IllinoisUSA

Telephone 0001-815-877-3031

Fax 0001-815-877-3336

Internet Address www.eclipsenet.com


Booth Hall 13 D12





01.04.08.01 Combustion technology for oil and gas fired smelting furnaces

01.04.08.02 Combustion technology for oxygen heating systems

01.04.09 NOx control technology



Eclipse Brightfire BurnerEclipse will showcase the Brightfire burner, an adjustable low NO air-fuelburner. Brightfire is the perfect choice for burner conversions from oil to gasfiring. It provides up to 35 percent lower NOx emissions and superior flamecontrol compared to other burners. In addition, the Brightfire provides awide turndown ratio. Its sleek design will accommodate the tightest portconstraints and provide years of trouble-free service. The burner's low NOxemissions and superior flame control are accomplished through acombination of coaxial annular and central core flow streams. Eclipse hassuccessfully installed the Brightfire in over 400 glass furnaces around theworld as burner retrofits and in new furnace installations.

E G L A S S M a c h i n e r y & P a r t s G m b H

Address Kastanienstr. 1298693 IlmenauGermany

Telephone 0049-3677-844010

Fax +49-3677-844011

Internet Address www.eglass-emp.de


Booth Hall 15 C28



01.06.01 Gob feeder

01.06.04 Bar feeder

01.07 Equipment for glass tube production





01.06.04 Bar feeder

Direct Heated Platinum System - DHPS®The Direct Heated Platinum Systems - DHPS® designed by EMP are usedfor high tech glass feeding. The DHPS® is made by precious metal alloy.This guaranties that even at high temperatures no impurities by corrosion ofthe feeder material contaminate the glass melt.The DHPS® contains of one or more separated electrical heated modules.Current heats up the tubes of precious metal alloy. The temperature istransmitted to the glass melt. In this way the glass melt can be cooled downor heated up regularly. In different modules of the DHPS® the chemicalhomogeneity of the glass melt can be improved (for example by stirring) upto optical quality. In the DHPS® - Refiner bubbles up to 0.1 mm can beeliminated and the gas content in the glass melt can be reduced.All DHPS® of the company EMP are tailor-made designed andmanufactured according to the customer s demands (glass type, pull rateetc.).

E i r i c h G m b H & C o K G , G u s t a v , M a s c h i n e n f a b r i k

Address Walldürner Straße 5074736 HardheimGermany

Telephone 0049-6283-51-0

Fax +49-6283-51-325

Internet Address www.eirich.com


Booth Hall 15 C27


01.03.04 Mixing technology

01.03.05 Pelletising technology

02.12.06 Treatment of wheel and polishing wharf



Ihr Produkt ist nie besser als die MischungEirich ist seit mehr als 100 Jahren in der Entwicklung der industriellenMischtechnik tätig. Viele Patente, die generell gute Zusammenarbeit mitden Anwendern und die Partnerschaft mit Forschung und Lehre begründenden guten Ruf des Eirich-Intensivmischers - weltweit.


Eirich verfügt über ein umfassendes Know-how in der GranulieKeramikPressmassen, Molekularsiebe, Proppants, Varistorenmasse,Dentalmassen, Schneidkeramik, Schleifmittel, Oxidkeramik, Mahlkugeln,Ferrite, etc.BaustoffePorosierungsmittel für Ziegel, Blähton, Perlit, etc.GlasGlasmehl, Kohlenstoff, Bleiglasgemenge, etc.MetallurgieEisen-, Zink- und Bleierze, Aluminiumoxid, Siliciumcarbid, etc.AgrochemieKalkhydrat, Dolomit, Phosphatdünger, Torfdünger, Mineralstoffe,Zuckerrübensamen, etc.UmweltschutzFilterstäube, Flugaschen, Schlämme, Stäube, etc.



Enter search key:




E l e c t r o g l a s s L t d .

Address 4 Brunel Road, Manor Trading EstateSS7 4PS Benfleet, EssexUnited Kingdom

Telephone 0044-1268-565577

Fax 0044-1268-565594

Internet Address www.electroglass.co.uk


Booth Hall 13 C36



01.04.01 Batch charging technology






Super "Molycool"Electrode Holders

Electroglass' high quality electrode holders are the result of very manyyears of continous research,development and experience.Manufactured from the highest quality temperature resistant steels,theElectroglass Super Molycool electrode holder is of advanced insulateddesign for energy saving and refractory block protection,primarily designedfor vertical


Glass Level SensorsThe Electroglass Glass Level Sensor employs a static refractory probeblock installed in the side of the furnace working end orforehearth,equipped with fixed platinum alloy probes,connected to the levelsensing/control unit.The system requires no water or air cooling or otherspecial services.It has no moving parts and is effectively maintenance free.


All-Electric FurnacesElectroglass designs and supplies continous cold-top all electric glassfurnaces with outputs ranging from 200kg per day,to 200 tonnes per day.Electroglass electric furnaces are available for almost every glasstype,including soda lime glasses forcontainers or tableware,glass wool and continous fibre glasses,hard andsoft borosilicate glasses,




flouride opal and borosilicate opal glasses,lead glassesfor tubing andtableware,TV panel/funnel glasses,and a range of special purpose andtechnical glasses.

Convection Current Control Boosting SystemsElectroglass Convection Current Control(CCC)boosting technology wasfirst introduced in the early 1980's.Continous development since then,and the experience of over 75 CCCsyste,s in operation,he resulted in ever greater boost energy effiency andglass quality improvement.Convection Current Control Boosting releases heat directly into the mainbody of the glass.By optimising electrode locations,spacing,immersions andelectrical connection arrangements in relation to each individualapplication,furnace and glass type,CCC boosting creates controlled positiveconvection currents in the furnace,improving heat transfer from the topfiring,increasing minimum residence times,homogenising the melt toproduce fully refined glasswith a consistent thermal history.

E L I O G K e l v i t h e r m I n d u s t r i e o f e n b a u G m b H

Address Käthe-Kollwitz-Straße 1098631 RömhildGermany

Telephone 0049-36948-820-0

Fax +49-36948-820-36

Internet Address www.eliog.de


Booth Hall 13 B59








02.09.04 Autoclaves



Enter search key:

E M E M a s c h i n e n f a b r i k C l a s e n G m b H

Address Bernhard-Hahn-Straße 11-1541812 ErkelenzGermany

Telephone 0049-2431-9618-0

Fax +49-2431-74687

Internet Address www.eme.de


Booth Hall 15 C45


01.03.01 Crashing and grading


01.03.03 Metering and weighing technology


01.03.06 Cullet preparation

01.03.07 Refuse collection and glass recycling

01.03.09 Colour sorting (cullet)











FACTORY CULLET TREATMENTDuring glass production cullet is created on

the processing machines. Experience has

shown that it is important to treat the cullet

in the factory itself and return it to the mel-

ting process. This not only largely reduces

the risk of contamination by foreign objects,

but also avoids unnecessary and, above all,

uneconomic transport and intermediate

storage. A cullet recycling system should

be installed on each melter, so that different

glass types do not become mixed.


CULLET TREATMENTAs a result of the continued rise in the cost

of raw materials and energy, and increased

environmental awareness in the population

a higher proportion of recycled glass is now

added to the melt.

Recycled foreign cullet always contains con-

taminants that can lead to gas or stone for-

mation, or other faults in the final product.

The most common contaminants are ad-

herent dirt, ceramics, metal closures, paper

and plastic. Cullet treatment plant is used to

remove these contaminants so that good

glass quality is retained even when a high

proportion of cullet is added to the melt.

EME have developed treatment concepts

and equipment for all glass sectors and

applications, including:

Holloware

Glass wool

TV tubes and

Laminated glass.

Many factors govern the decision about

the type of treatment method to be used.

We should be pleased to discuss which

installation concept would be most suitable

for your application.

E m h a r t G l a s s S A

Address Hinterbergstrasse 22ChamSwitzerland

Telephone 0001-607-735-4279

Fax 0001-607-734-8278

Internet Address www.emhartglass.com


Booth Hall 13 B45








Gob Image AnalyzerEnhanced analysis of true gob imageUp to four gobs can be analyzed andcontrolled simultaneously by one central unitMultiple camera configurationsfor a wide variety of applicationsHigh accuracyCamera at blank loadpositionOpen communication to Windows environmentReduction ofcontainer weightStability throughout the forming processStorage of gobprofiles



Enter search key:

E M M E T I S . P . A .

Address Via Galilei, 2942027 Montecchio EmiliaItaly

Telephone 0039-0522-86-1911

Fax 0039-0522-86-1912

Internet Address www.emmeti-spa.it


Booth Hall 13 B63









Pallet Formation AreaThe formation area can be equipped with a range of options to conditionthe layer before being palletized. These operations involve strapping andhorizontal banding.


Row preparation and Transfer AreaThe essential component configures the layer of round containersaccording to the preset palletization pattern. It can be push-type. withliftable guides, or grip-type, operating with pneumatic grippers. Thepush-operating version can treat up to 7 rows at a time, at a speed of 8cycles per minute.The stacker can also be equipped with devices to allow layer formation tocope with horizontal strapping. Special equipment is also available for thetreatment of non cylindrical containers (square, rectangular, oval,triangular).-

E u r o m a t i c S . r . l .

Address Via La Malfa, 424047 TreviglioItaly

Telephone 0039-0363-303-200

Fax 0039-0363-301-720

Internet Address


Booth Hall 13 C22













ZETA 103is the fastet high precision system for the production of pharmaceuticalcartridges from glass tubes, mainly used for dental anaesthetics and insulinfor diabetics`pen systems. Making use of our know- how and the state- of-the- art technology. Euromatic offers innovative equipment with hihgperformances both in terms of precision and production speed.

E U R O - T E C H , V a k u u m - , H e b e - u n d T r a n s p o r t t e c h n i k

Address Dammstr. 172351 GeislingenGermany

Telephone +49-7433-904680

Fax +49-7433-9046813

Internet Address www.euro-tech-vacuum.de


Booth Hall 15 A56





01.13.08 Construction and glazing equipment


02.11 Auxiliary products

02.11.07 Vacuum pumps

04.01 Glazing tools




AbstapelanlagenKomplettausrüstungen für Ab-

stapelanlagen unter Ein-

haltung höchster Qualitäts- und Sicherheitsrichtlinien


TransportsystemeTransportsysteme in zahlreichen Ausführungen und unter Berücksichtigungder individuellen Wünsche und Anforderungen


Hebegeräte für die GlasindustrieBeispiel eines Verglasungsgerätes


Einzelkomponenten




ob Serie oder Sonderanfertigung, Sie erhalten unsere Komponenten undSaugplatten in fast allen Größen und Materialien passend für IhreAnwendung

E x c e l s i u s I n t e r n a t i o n a l G m b H

Address Bgm.-Dr.-Nebel-Straße 1497816 LohrGermany

Telephone 0049-9352-6044-00

Fax +49-9352-6044-19

Internet Address www.excelsius-international.com

EMail

Booth Hall 15 B61





Service*Heat-ups and Commissioning

*Controlled Cool-Downs

*Expansion & Contraction Measurement and Control

*Hot-Hold with Production Continuation Capability

*Cullet-Fill

*Furnace Tap & Drain

*Regenerator Melt-Out

*Furnace Drilling/Electrode Installation

Link zu weiterer Informationhttp://www.excelsius-international.com

F . I . C . ( U K ) L i m i t e d

Address Long Rock Industrial EstateTR20 8HX Penzance, CornwallUnited Kingdom

Telephone 0044-1736-366962

Fax 0044-1736-351198

Internet Address www.fic-uk.com


Booth Hall 13 F49









HVP ForehearthThe HVP Forehearth's unique method of volatilisation control avoids all thedefects of preceding designs such as suppressed glass levels and,with theaid of unique 'muffle tiles',ensures a much improved heat transfer resultingin the rapid response required during job changes.


FIC High Q More than 2,500 operating

successfully world-wide.




FIC has once again pushedthe frontiers of glass industrytechnology to bring theindustry the ultimate incooling efficiency andtrouble-free maintenance.

F . O . R . T . E . S . r . l .

Address Via Melchiorre Gioia, 1929017 Fiorenzuola d'Arda / PCItaly

Telephone 0039-0523-981535

Fax 0039-0523-242344

Internet Address www.fortesrl.net


Booth Hall 13 F54





AUTOMATIONF.O.R.T.E. Srl are specialized in automation and control systems for theglass industry, with special care of:> Furnace control> Distributors and forehearth control> Auxiliary control> Boosting system control

F.O.R.T.E. Srl are skilled in the following sectors:> Industrial electrical systems> Water treatment systems> Industrial automation and instrumentation> Process control> Loop-Diagram, P&I and Flow-Chart development

> Signal transfer and handling with traditional technology> Signal transfer and handling with field bus> Software for PLC and PC (SCADA/HMI) for plant supervision> Remote stations for monitoring, control and assistance of softwareapplication packages (supervision, management, etc.) via Local AreaNetwork (LAN) or Wide Area Network (WAN)

F.O.R.T.E. Srl provide technical consultancy, maintenance, design,production and installation of automation systems, by integratinginstrumentation and software programs and supplying auxiliary as well as turn-key systems.

By previous severe tests, F.O.R.T.E. Srl provide their Customers with thebest instrumentation for industrial and laboratory process control, thusguaranteeing working life and reliability.

The experience of F.O.R.T.E. Srl engineers together with a flexible anddynamic organization, guarantees the Customer with immediate assistancefor the systems and instrumentation installed.

F a l o r n i G i a n f r a n c o S . r . l .

Address Viale IV Novembre, 1550053 Empoli / FIItaly

Telephone 0039-0571-922333

Fax 0039-0571-920816

Internet Address www.falorniglass.com


Booth Hall 14 B09





Micro GM F 10, 30, 75




Falorni Gianfranco Srl is pleased to present its new line of small glassmelting furnaces, gas fired, mod. Micro GM F 10, 30 and 75.Falorni Srl, with this new line of small melting furnaces, provides smallartistic workshops with the advantages of its experience in the field ofartistic glass.The result of that experience is the new line of Micro GM F furnaces, thatprovide solutions to the problems of flexibility and quality. In particular:

They reach the melting temperature very quickly, so that they can be turnon in the morning to work the glass already the same afternoon.They permit traditional methods of glass removal, from the workingopening, either with the blowpipe or with the ladle.The hole on the bottom permits extraction of the glass for the production ofbeads and threads of glass. The hole is also fundamental for cleaning thefurnace during color changes.All MGM furnaces can be tilted by 45° using a special mechanism. Tilting isvery useful for production with the "Casting" technique and for processingblown glass because, as it permits gradual tilting of the furnace, it ispossible to keep the level of molten glass higher.They are all mounted on wheels for full mobility.They can work with either Methane gas or LPG.

F e r l a m T e c h n o l o g i e s

Address 85 rue MongeRoubaix CedexFrance

Telephone 0033-320-659-670

Fax 0033-320-659-699

Internet Address www.ferlam.com


Booth Hall 12 B50








02.11.03 Insulating C203materials



04.06 Working clothing



Crystal and table wareRopes and tapes for lagging around tools, guides and pincersConveyorbeltsMark free contact materialNo thermal shockOperating temperatures:250 - 800 °CIncreased lifetime (+/- 6 times as long as asbestos)Nopre-heating station=> Safer and cleaner work place=> Energy consumption reduced=> Ecotax savings

F e r r o C o r p o r a t i o n , G l a s s S y s t e m s

Address 1000 Lakeside Avenue, P.O. Box 1470 0044114-7000 Cleveland, OhioUSA

Telephone 0049-69-27116-0

Fax +49-69-27116-368

Internet Address www.ferro.com

EMail

Booth Hall 11 E66


01.04.12 Feeder colouring

02.05.02 Laser-marking technology






03.02.02.01 Laminated safety glass

03.02.11 Printed glass

03.02.13 Low maintenance glass

03.03 Automotive glass


03.06 Glass bricks

03.09.01 Structural glazing (pasted glazing)

03.09.03.05 Glass curtain walling

03.09.18 Worked flat glass (general)


03.11.03.02.07 Precious metal preparations



Enter search key:


Suchwort eingeben:

F I B B e l g i u m , L e F o u r I n d u s t r i e l B e l g e

Address rue des Trois Arbres 141180 BrusselsBelgium

Telephone 0032-2-332-1717

Fax 0032-2-376-3711

Internet Address www.fib.be


Booth Hall 14 C48





IMPDRunder Brenner mit einer gusseisernen Platte, für Montage im Wand mitMitteldicke. 11 Modelle sind in dem Bereich von 11.000 bis 330.000Kcal/Std. eingeschlossen. Elektrische Anzündung, Handzündung oderZündung mit Pilotzündflamme.

IMPGV




Viereckiger Brenner mit einer gusseisernen Platte, für Montage im Wandmit Mitteldicke. 11 Modelle sind in dem Bereich von 11.000 bis 330.000Kcal/Std. eingeschlossen. Elektrische Anzündung, Handzündung oderZündung mit Pilotzündflamme.

IMPLGViereckiger Brenner mit einer gusseisernen Platte, für Montage im Wandmit starker Dicke.7 Modelle sind in dem Bereich von 16.000 bis 110.000Kcal/Std. eingeschlossen. Handzündung mit Pilotzündflamme

IMRRunder Brenner ausgestattet mit einem zylindrischen Gehäuse und einerMontageplatte im feuerfesen Stahl. Verwendet in Wand oder Gewölbe mitgeringer Dicke. 11 Modelle sind in dem Bereich von 11.000 bis 330.000Kcal/Std. eingeschlossen. Elektrische Zündung oder mit Pilotzündflamme

F i b e r t e c - C o n s o r t i u m G m b H

Address Ringweg 1194227 ZwieselGermany

Telephone 0049-99221-5029-729

Fax +49-99221-5032-984

Internet Address www.fibertec-consortium.com


Booth Hall 14 B50



01.08 Equipment for glass fibre production

01.08.03 Textile glass fibre technology



05.02 Regulation technology




Forehearths-Electric and gas heated forehearth designs-Combustion air supply-Gas pressure regulating-Safety station-Gas/Air pre-mixing units-LPG-emergency supply-Burner equipment





Batch Plants-Indoor Silos-Dumping station-Pneumatic filing system-Automatic weighing station-Pneumatic coveying system-Pneumatic Mixer-Venting filters-Electric control panel-Design,Documentation-Training for Batch production-Supervision

F i m a O l i m p i a F o n d e r i e S . p . A .

Address Strada di Poneta, 1750021 Barberino Val d'Elsa / FIItaly

Telephone 0039-055-8073048

Fax 0039-055-8073171

Internet Address www.fimaolimpia.it


Booth Hall 14 C70





Moulds

Hanving the most modern equipments for controls and quality, FIMAOLIMPIA Fonderie has been specialising for many years in the productionof special cast irons for the glass industry moulds, alloyed to Fe-Vn, Fe-Mo,Fe-Cr, Fe-Ti and Nickel. The very flexible and dynamic organisationstructure, allows us to give right answers the needs of this market. We havean internal mould model department whit a specialised staff for the buildingof models and three furnaces for heat treatments.

F o n d e r i e B a r t a l e s i S . r . l .

Address Via Tevere, 153036 Poggibonsi / SIItaly

Telephone 0039-0577-936669

Fax 0039-0577-985610

Internet Address www.fonderie.bartalesi.com


Booth Hall 14 C70





Alloys for glass industry castingsBronze semifinished and finished neck rings







Enter search key:

F o n d e r i e V a l d e l s a n e S . p . A .

Address Strada da Gabbricce, 653035 Monteriggioni / SIItaly

Telephone 0039-0577-3047-30

Fax 0039-0577-3047-55

Internet Address www.fonderievaldelsane.com


Booth Hall 14 D70





k250 LAMINAR GRAPHITEEstabilished as a reference in the costruction of mould and accessorys.The laminar microstructure of it has been conceived for having the ability ofthe qickest thermic dispose,supported also from a vast choice in terms ofchemicol composition.The peculiarity of it is very aimed for needs of hight speed in production.

F O N D M E T A L L I C o n v e y o r s S . r . l .

Address Via XXV Aprile, 223804 Monte Marenzo / LCItaly

Telephone 0039-0341-636-1

Fax 0039-0341-630-247

Internet Address www.fondmetalli.com


Booth Hall 14 E78





Metallic Conveyor BeltsToday speed and automatism are fundamental for productive process. Inthis logic metallic conveyor belts fond their own application.

Inserted in eqipments (ovens in general, driers, cooling systems, washingsystems) or used to convey the material into working cycle, they can meetsome and different demands. Manufactured in different materials they canwork at room temperature, at low (-60° C) and high (1200° C) temperaturesand also in aggressive environments.




F O R . E L S . p . A .

Address Via per Monastier, 431056 Vallio di Roncade (Tv)Italy

Telephone 0039-0422-840507

Fax 0039-0422-840900

Internet Address www.forelspa.com


Booth Hall 16 C19







Enter search key:

F o r m a G l a s m a s c h i n e n - F r . W i l h e l m K u t z s c h e r G m b H

Address Angerstraße 3094227 ZwieselGermany

Telephone 0049-9922-609830

Fax +49-9922-609831

Internet Address www.formaglas.com


Booth Hall 14 A55




01.06.04 Bar feeder










Blasmaschine IBS




Der im Bild gezeigte Maschinen-Typ kann in verschiedenen Modifikationenmit 10 bis 24 Stationen zur Herstellung von Kelchgläsern, Bechern,Glühlampenkolben, Laborartikeln, Thermoskannen und anderen imBlasverfahren herzustellenden Glasartikeln gebaut werden. Die imRotations-Blasverfahren arbeitenden Maschinen können auch mit einerFestblasvorrichtung ausgestattet werden.Mit einem Spezialequipment ist auch eine Produktion von Kelchgläsern mitgezogenem Stiel (in Zusammenarbeit mit einer Ausziehmaschine) möglich.


Pressglasmaschine ISPDie im Bild dargestellte Pressen-Type kann in verschiedenen.Modifikationen mit 8 bis 16 Stationen hergestellt werden.Antriebssystem: Index oder MaltesaPressystem: hydraulisch oder mittels Servomotor

F r i e d r i c h F a r b g l a s h ü t t e G m b H , K u g l e r C o l o r s ®

Address Reifträgerweg 2987600 Kaufbeuren-NeugablonzGermany

Telephone 0049-8341-96617-0

Fax +49-8341-61625

Internet Address www.kuglercolors.de


Booth Hall 9 G26




03.01.03 Blown glass

03.01.06 Glass for gardening uses

03.01.09 Antique and coloured glass

03.01.15 Cross out glass for melting/ Fusing glass

03.11.03.02.05 Glass smelting/fusion technology



Pre-heating ovenWith these tunnel ovens you can produce your overlay at a reasonableprice for even small series and fulfil customers wishes on a flexible basis.The tunnel ovens enable the warming up of cups and rods to the correctfurther processing temperature.

With oven measurements of 1,7 x 0,8 m the two "midgets" even fit into thesmallest glass factories and yet you can achieve great results concerningcolor selection and processing speed with these ovens. The first oven is apre-heating tunnel for colored overlay cups which can warm up heavy leadglasses and soda lime glasses with cup diameters of 60-180 mm and avariably adjustable temperature range of 450°C - 600°C. The second ovencontains a pre-warming drum for rods and enables the warm up of rods upto a rod diameter of about 30 mm and a rod length of about 280 mm.

F u c h s L u b r i t e c h G m b H

Address Hans-Reiner-Str. 7-1367685 WeilerbachGermany

Telephone 0049-6374-924-5

Fax +49-6374-924-940

Internet Address www.fuchs-lubritech.com


Booth Hall 15 B56





01.02.03 Lubricators and coolants


02.11.08.02 Chemical grinding and polishing materials

02.11.08.03 Chemical coolants

02.11.08.04 Chemical rust prevention agents

02.11.08.06 Chemical cleaning agents



GLASOL productsAll products formulated to comply with the latest legislation Research

Development and production in our premises

Short delivery times

Low budget by stable and long life products

Highest standards for safety and security

No use of toxic chemicals

F ü l l e r G l a s t e c h n o l o g i e V e r t r i e b s - G m b H

Address Industriestraße 194518 SpiegelauGermany

Telephone 0049-8553-518

Fax +49-8553-514

Internet Address www.f-gt.de


Booth Hall 13 F24





Roundtable PressThe pressing manufacturing mode is designed to produce glass items withdécor and items with a wide range of simple and complex shapes. Thepressing system may be combined with gob feeding and continuous casting(in combination with the movement of the roundtable and theheight-adjustable frame). It is also compatible with every mould systemavailable (block mould, basket mould, hinge mould).

f u t r o n i c G m b H

Address Waldesch 2988069 TettnangGermany

Telephone 0049-7542-5307-0

Fax +49-7542-5307-70

Internet Address www.futronic.de


Booth Hall 13 D44


01.02.04 Laboratory equipment


02.13.02 Software

05.01.01.02 Measurement and control of viscosity


05.02.01 MRP machine and transport adjustment

05.02.03 Electronically controlled machine cooling








StrainTESTER / PolariscopeMit dem StrainTESTER kann der Entspannungsprozess von Glas schnellund einfach direkt an der Produktionslinie überwacht werden. Aufgrund vonTemperfehlern oder Einschlüssen auftretende thermische bzw.mechanische Spannungen werden schnell erkannt und können qualitativund quantitativ bewertet werden.

G E R O L D G m b H & C o . K G , M a s c h i n e n b a u

Address Herrenpfad-Süd 4441334 NettetalGermany

Telephone 0049-2157-817-0

Fax +49-2157-817-120

Internet Address www.gerold-mb.de


Booth Hall 15 D33










02.07.01 Machines and equipment for the production of display glass


02.09.03 Foil treating technology (storing, climate, uncoiling)



Glass Machinery - Material Handling EquipmentIn the area of conveying and handling equipment we design both singleunits as well as complete line systems.

Adding these units to our screen printing machines to realize complexproduction lines or simply handling, stacking, aligning flat glass are part ofour daily business. Once more, automotive glazing is the key product weare dealing with, i.e. flat glass in preprocess lines and/or bent glass inpostprocess lines.

The following list shall serve as an overview:

Belt- and roller conveyors

Angular transfers and turn stations

Loading / unloading tables

Stacking equipment

Shuttle transfers

Alignment stations

Inspection tables for quality assurance

Furthermore, GEROLD designs and realizes installations for automationsolutions such as automatic assembly of windshields and PVB or sidelitesand PVB. Linking and handling installations for robot applications (e.g.mirror button application, soldering) are also part of this product line.




G i a r d i n a O f f i c i n e A e r o m e c c a n i c h e S . p . A .

Address Via Vico Necchi, 6322060 Figino Serenza / ComoItaly

Telephone 0039-031-727-1

Fax 0039-031-781-751

Internet Address www.giardinagroup.com


Booth Hall 16 C79





02.03 Edge and surface finishing technology


02.06.03 Mirror coating equipment

02.06.04 Metallizing machines


03.11 Technical processing, treatment, finishing design.



Produkt DescriptionMachines for the application of ceramic and organic paints, silicon-basedproducts and similar products - such as antifogs - by means of rollercoaters, curtain coaters and automatic spray machines as well as dryingand cooling systems. The solutions offered by Giardina are the mostinnovative and efficient. Especially the new and unique certified MicroWave System MOS® realised to guarantee the most rapid and excellentdrying for water-based cycles.

G L A M A C O M a s c h i n e n b a u G m b H

Address Prasseweg 101640 CoswigGermany

Telephone 0049-3523-646-26

Fax +49-3523-646-28

Internet Address www.glamaco.com


Booth Hall 14 C42


01.06.01 Gob feeder












02.01 Cutting, breaking and snapping technology

02.01.01.03 Cutting technology for technical glass

02.03.02 Grinding techniques for hollow glass / moulded glass

02.03.02.01 Decorative grinding technology for hollow glass



02.07 Electronic display glass technology





03.04.05 Production plant for solar technology



05.02.02 CNC control for handling machines



01.06.01 Gob feeder

NC-Feeder for rotation blowing machineThe NC - feeder are designed special for use on rotating blow machinesand run successful in this production range. Plunger and shears are movedby servo motor drives with up to date control electronics. Both units,plunger mechanism and shears are assembled on the supplied feederbowl. Interface to the furnace supplier is the flange of the feeder bowl.

consist of:

· plunger mechanism with computer controlled servo drive

· shears with computer controlled servo drive

· stroke device for plunger change

· feeder bowl including orifice ring taking up and flap

· complete control cabinet incl. PC- control

Link zu weiterer Informationhttp://www.glamaco.com


Blowing machineRotary blowing machines for technical and domestic hollow ware;with:- Gob feeder- press station- 16 or 20 working stations with divided working tables- automatic take outgob weight 150 to 1400 grammmachine velocity 10 to 40 articles / min.



Glass Machines

Machines for technical & domestic glass ware

GLAMACO Maschinenbau GmbH deliver glass technology and machineryfor production plants for borosilicate glass, hard glass lamp bulbs and tableware.

- Planning your facility depend on your glass production program

- Selection the machines for your plant depend on glass type, furnacecapacity, article spectrum and production speed

- Basic layout of your glass works with all medium supplies

- Production and assembly machinery by GLAMACO specialists (see alsoin these product categories and our homepage)

- Production lines

- Feeders

- Blowing machines

- Special parts for modernization of second hand blowing machines

- Burn off machines

- Spout Forming machines

- Handle Ware Making machines

- Fire Polishing machines

- Decor Grinding machines

- Lehr loader (Charger)

- Transport and Handling systems

- Production and line control systems

and also:

- Batch chargers



Burn off & Fire Polishing MachinesBurn off machines

Hot cutting machines or Burn off machines developed by GLAMACOMaschinenbau GmbH. Based company s 50 year experience in glasstechnology and machine construction. GLAMACO Burn off machines areappreciated for their reliability, performance, high productivity andcost-effective operation.

All our machines are provided with GLAMACO Divided Working Tables(DWT) allow the glass articles to be taken out together with the residual




tablet by means of a removing unit.

There are two different machine types of Burn off machines available:

Single station machines

Type HAM 01 NC is a full automatically single drive machine. Feeding ofglass articles is possible by hand or by robot.

Continuously running rotary machines with high productivity

Type HAM 20 E with 20 stations

Also available with 24 or 30 stations

All our machines are usable for different gases: NG, LPG and H2

The fire polishing machine and the rim melting machine are two types ofmachine with similar in the basic structure. Due to the technologicalfunction there are differences particularly in the choice and layout of theburners and their control. Special handling systems provide the feeding andtake off.

The fire polishing machine has been intended for fire polishing as anadditional surface refinement for moulded glass ware and high value crystalglass.

The rim melting machine is used for melting the fin at the product edgeresulting from glass pressing.

GLAMACO deliver three types of these machines:

1. Turntable machines

2. Belt conveyor machines

3. Straight-type machine



Transport systemsGLAMACO design and produce transport systems for flat glass (rollerfurnace, radiation furnace, furnaces for heating of flat glass in thermalpre-stressing plants)

and transport systems for hot technical glass (technical and hollow wareglass)



Transport and Handling systems

For our productions lines for Technical Hollow Ware we deliver allnecessary equipment to handle the hot glass and to connect all GlassMachines:

- Take out for Blowing machine Taking out and Turning Over Device KWA4

- Conveying systems like - Transport Conveyor Belts

- Inclined Conveyors

- Conveying systems with cooling boxes

- Corner transfer systems

- Transfer systems between Conveyors

- Push Bar Stacker - Portal charger

- Electrical lehr loader

- Pneumatic lehr loader

G l a s s C o n c e p t s I n t e r n a t i o n a l , I n c .

Address Green Cove Springs, FLUSA

Telephone 0001-760-416-4344

Fax 0001-760-416-8893

Internet Address www.glass-concepts.net


Booth Hall 13 C17-5


01.06.01 Gob feeder





2nd hand Press machines for sale - MDP/ADPLynch MDP 16 station with Genivia drive and clutchLynch round firepolisher (12 head?)Air driven Lynch press 12 station with CC (no




terminal)Air Driven Lynch Press ADP 12 head 30" 5. Over 100 sets ofPress molds.

G l a s s S e r v i c e I n c .

Address Rokytnice 60755 01 VsetinCzech Republic

Telephone 420-571-498-519

Fax 420-571-498-599

Internet Address www.gsl.cz


Booth Hall 13 A17











05.01.03 Measuring devices to be used on site




05.03.05 Other control systems


07.04 Test institutes

07.05 Research institutes and projects



Electric Pot FrunacesThe Engineering Department of GLASS SERVICE, INC. was establishedto develop and produce new small capacity electric pot furnaces to supportenvironmentally friendly glass melting. Since 1992, when this division wasstarted, GS Engineering has made over 40 installations of these potsfurnaces as a turn-key deliveries.Electric pot furnaces supplied by GS provide an economic andenvironmentally friendly alternative to oil or gas fired small furnaces formany different types of glass. Electric melting processes are especiallysuitable for high value production such as crystalline and lead crystal or ingeographic regions where the use of electric energy is favorable.GLASS SERVICE would be pleased to provide you with its technologythat gives you the following benefits:

TYPE OF GLASS

Soda lime glassLead crystalColor glassesOthers (the only exclusion is a glass with a content of fluor such as opal)

TYPES OF ELECTRIC POT FURNACES

GS can deliver following types of electric pot furnaces:Singlepot furnaces - ATEL (pot diameters 65 - 100 cm)Doublepot furnaces - ATEL (pot diameters 65 - 100 cm)Crucible singlepot furnaces - ART STUDIO (pot diameter 40 - 60 cm)Crucible doublepot furnaces - ART STUDIO (crucible diameter 40 - 50 cm)Singlepot furnace with a feeder for the production of costume jewelry androds - CHATONFurnace for melting of glass cullets - HOBBY




G l a s s S e r v i c e S . r . l .

Address Via Cascina Lari56027 San MiniatoItaly

Telephone 0039-0571-4442

Fax 0039-0571-417051

Internet Address www.glassservice.it


Booth Hall 14 E56





melting furnacesGLASS SERVICE offers a wide range of continuous melting furnaces withproduction capacity from 5 ton/day up to 60 ton/day suitable either formanual manufacturing and high speed automatic production.

Each continuous melting furnace shall be tailored to customer requirementsand to the specific working conditions in which it will operate. The furnacescan be equipped with combustion systems fired with Natural Gas, LPG andheavy oil and can be integrated with either with electric boosting systemsand Oxygen boosting systems for higher working flexibility and betterefficiency.

GLASS SERVICE offers continuous melting furnaces for the production ofsoda lime glass for various applications, lead crystal for high qualityglassware, borosilicate glass for lighting or ovenware.

The combustion chamber can be configured cross firing type (with sideburners) or end firing type (with burners on the stack side) depending ontank size and type of combustible. The burners supplied with the furnaceare of high luminosity type and are specially designed for glass meltingapplications.

All the auxiliary systems of the furnace such as combustion plant, controlsystem, batch charging system, control level systems are conceived for

the specific use in glass melting application so as to guarantee maximumperformances, high reliability and working flexibility.

All furnaces are equipped with efficient combustion systems managed byadvanced, easy to use and fully automatic control systems able tosupervise all main operation parameters and continuously monitoring theplant working condition advising in case of any problem.

The furnace working end can be equipped with forehearths of different sizeand purpose or can be equipped with bays for manual and robot gathering.

G l a s s T e c h n o l o g i e s S . r . l .

Address Via J. Massarenti, 929100 PiacenzaItaly

Telephone 0039-0523-623058

Fax 0039-0523-609785

Internet Address www.glasstechnologies.it


Booth Hall 13 F32




01.04.05 Regenerative systems













Schmelzofen

G l a s s T e c h n o l o g y I n t e r n a t i o n a l G m b H

Address Mühlenkamp 3122303 HamburgGermany

Telephone 0049-40-275057

Fax +49-40-275058

Internet Address www.glassgti.com


Booth Hall 14 A61







Schmiermittel für Behälterglasproduktion

Von der Schmelzwanne bis zum Verladeterminal liefern wir Ihnen alleSchmiermittel, die Sie für die Behälterglasproduktion benötigen.

GTI (zertifiziert nach ISO 9001) ist schon lange bekannt als Pionier in derForschung, Herstellung und Weiterentwicklung von HiTech-Schmiermittelnunter spezieller Beachtung von:

- Scheren- und Rinnenschmiermitteln

- synth. Schmiermitteln für Heißendeqipment

- Schwabbelmassen

- Vorformbeschichtung

- IS Maschinen-Oele

- Hochtemperaturschmiermitteln

G l a s s w o r k s H o u n s e l l L t d

Address Park LaneB63 2QS West Midlands, HalesowenUnited Kingdom

Telephone 0044-1384-560666

Fax 0044-1384-561363

Internet Address www.glassworkshounsell.co.uk


Booth Hall 13 F28





MARK 3




The MARK III Oscillating Batch Charger is the most developed batchcharger available. It is suitable for all sizes and types of furnace. It s designallows increased flexibility as the OBC can be split leaving the StationaryWater Box to seal the dog-house increasing efficiency and reducing therisks of thermal shock.

Oscillating Batch ChargerOSCILLATING BATCH CHARGER

The CONVENTIONAL Oscillating Batch Charger fits all sizes and types offurnace. It is used to seal the furnace and to obtain better batch distribution.

SCREW CHARGERSCREW CHARGERSuitable for all sizes of furnaces, it is used mainly with Oxy Fuel and whensealing the furnace is a top priority.

STANDARD FEATURESContinuous hardened screw section.(Constant or variable pitch)Static Hopper.Geared Motor with Torque Limiter.Inverter.Polyurethane Wheels

OPTIONS AVAILABLESegmented screws (180°)Water Cooling for tube tip.Adaptable Specification to Customer Requirements

STATIC CHARGERSTATIC CHARGER

The STATIC Charger is ruggedly built, simple to install and cheap tomaintain. Suitable for sealing a doghouse on furnaces up to 200 TPDSTANDARD FEATURES

-3 Water Cooled Sections-Water thermometers-AC or DC Motor

X-Y CHARGER

X-Y CHARGER

An X-Y/Boom Charger is suitable for all sizes and shapes of electricfurnaces it is capable of charging between 1.5 tpd and 80 tpd andadaptable to the customer's exact requirements

G - L E H R S

Address Molenstraat 37/12220 Heist op den BergBelgium

Telephone 0032-473-860-006

Fax 0032-1576-2326

Internet Address www.lehrs.be


Booth Hall 13 F17







Mould Pre-heating KilnGas direct or indirect firing.Electric heating.Oil heating.Airconvection.Automatic temperature control.Complete stainless steelconstruction.Standard sizes 1-2-3-4 m² / all other sizes available.Doors 1-2or 3.These ovens can be used for annealing and decorating.Easyprogrammable for an equivalent of a 16 section lehr.Simple construction -Low price - Low maintenance


Standard FeaturesControlled by temperature-controllers with an accuracy of 1ºCelsius.Modular construction facilitates installation and simplifies future




expansion or alteration.Each section has two major components : theoutside case and the inside tunnel, mounted totally independent, isolatedfrom each other with ceramic fibre insulation.A long lifetime thanks to thethickness and quality of the steel and the rigid construction with Uprofiles.Inside tunnel in stainless steel, especially shaped to provideoptimum air circulation.Extremely thick asbestos-free ceramic fibre betweenthe inside tunnel and the outside case makes the G-lehr the best isolatedlehr in the market.The hot air circulating fans (stainless steel) are directdriven (no belt).Deflecting baffles for perfect hot air distribution.Fish bonebelt support in solid stainless steel.Inside return belt (Outside return ondemand).Belt min 5% chrome.Alarms for fans and burners gives highsecurity.We guarantee perfectly welded and mounted lehrs, exactdimensions and a flawless finish.Only the best materials are chosen, ABBmotors, Siemens servomotors, SKF bearings.Simple construction - Lowprice - Low maintenance

G o T o s . a .

Address rue Champeau, 16061 Montignies-sur-SambreBelgium

Telephone 0032-71-201770

Fax 0032-71-201779

Internet Address www.goto.be


Booth Hall 13 D05





R 7 Roirant MachinesWe can re-condition your R7 Roirant machine, equipped in Single orDouble Gob, or supply completely re-manufactured Roirant machinesaccording to your requirements.

We can also recondition the WW7 machine (a Russian copy of the R7machine) and bring it up to R7 standards and performances.

The R7 Roirant machine can be equipped with :Internal cooling and compressed air blowing.Floating neck ring holders.L15 Electronic link equipment.

Installation of Roirant machines mostly demands very few modificationsof surrounding equipment.

S10 Roirant MachinesWe can re-condition your S10 Roirant machine, equipped in Single orDouble Gob, or supply completely re-manufactured Roirant machinesaccording to your requirements.The S10 Roirant machine can be equipped with :Internal cooling and compressed air blowing.Floating neck ring holders.L15 Electronic link equipment.

Installation of Roirant machines mostly demands veryfew modifications of surrounding equipment.

G P M - G l a s s P r o j e c t M a n a g e m e n t a n d U s e d E q u i p m e n t

Address Grand Place 107090 Braine-le-ComteBelgium

Telephone 0032-67-79-4070

Fax 0032-67-79-4079

Internet Address www.gpmglass.com


Booth Hall 13 D04





02.12.01 Treatment of used glass







Forming machinesUsed machines and equipments for production of container and tablewareglass

Link zu weiterer Informationhttp://www.gpmglass.com/-Forming-Containers-Tableware-and-


Second Hand lehrsSeveral models available from glass plants in Europe

Link zu weiterer Informationhttp://www.gpmglass.com/-Annealing-and-Tempering-

G P S G l a s p r o d u k t i o n s - S e r v i c e G m b H

Address Ruhrglasstraße 5045329 EssenGermany

Telephone 0049-201-3600-771

Fax +49-201-3600737

Internet Address www.gps-essen.de


Booth Hall 14 E77


01.06.01 Gob feeder






01.06.01 Gob feeder

PlungerFeeder:Typen:81 - 115 - 503 - 515 in den AusführungenStandard, Hochgeschwindigkeit undservo-elektrisch

Ausgleichszonen:81 - 510 - Sonderausführungen

Feederköpfe:81 Standard - 81 Tief - 503 - 515

Drehrohr:503 - 515 für 7" - 8" - 10" - 12"Elektrische TonrohrhöhenverstellungFeederscheren der Typen 81 - 503 undParallelscheren

IS-Maschinen :Neufertigung und Generalüberholung

Verfügbar in den Mittenabständen :4¼" - 5" - 5½" - 6" - 6¼" (Doppeltropfen),3" - 4" - 4¼" (Dreifachtropfen)

Maschinengrössen:4 bis 12 Stationen (auf einem Maschinenbett)2x6 Stationen Tandem,2x8 Stationen Tandem

Zubehör / Optionen:Servo-Tropfenverteiler in allen MittenabständenRinnenaufnahmesystemPressdruckregelanlagenZweikreispegelkühlungssystemeCCH-TransportbänderServo-AbstreifersystemeAMC MaschinenantriebssystemeElektronische Steuerung TS2000AustauschmechanismenErsatzteile

AusrüstungsteileRinnenausrüstungen,Hülsenzylindereinsätze,Vorform- und Fertigformhalter,




Blaskopf-,Vorformboden-,Trichter- und Greiferarme, etc.

Wirtschaftsglas-Maschinen:Pressblasmaschinen, Aggregate und Sonder-maschinen zur Herstellung von Trinkgläsern.

G R A F I X G m b H , Z e r s t ä u b u n g s t e c h n i k

Address Kupferstraße 40-4470565 StuttgartGermany

Telephone 0049-711-7869-0

Fax +49-711-7869-252

Internet Address www.grafix-online.de


Booth Hall 15 E23


01.10.05 Separator applying machines




Glasbestäubungsanlagen

Laufgeschwindigkeit: 1-2 m/s

Mittlere Höhe über Fußboden: 900 mm

Breite: 1300 mm (Autoglas) bis 4600 mm

Es können verschiedene Pudersorten verwendet werden

G r a f o t e c S p r a y S y s t e m s G m b H

Address Keimstraße 7A86420 DiedorfGermany

Telephone 0049-821-90699-0

Fax +49-821-90699-10

Internet Address www.grafotec.com


Booth Hall 15 B49



02.11.08 Chemicals







AGA2000 Auto Glass ApplicatorThe Grafotec AGA - System is an unique, contact-free, mechanical workingroller application system, which impresses through its simple technology.Due to its nearly maintenance free and extremely service-friendly design, itis particularly well suited for a continuous operation such as for theproduction of wind-shields.

The system especially distinguishes through its even and homogeneousapplication. The liquid amount could be easy controlled by the mechanicallyoperated adjustment post.

The highspeed application roller (up to 6000 rpm) produces a very fine mistdirected towards the front. The amount of mist leaving the housing iscontrolled by the mechanically adjustable shutter gap.

The pneumatic driven shutter (opening and closing) allows to apply theliquid on individual sheets, without losing much of the liquid.

The PLC controller is well proven and allows quick adaptation to variousproduction needs.

Link zu weiterer Informationhttp://www.grafotec.com













AP900 Powder ApplicatorDas Grafotec AP - System ist ein fortschrittliches, mechanisch -pneumatisch arbeitendes Düsen - Auftragssystem das durch seinezuverlässige und robuste Bauweise besticht.

Universell einsetzbar sowie aussergewöhnlich wartungs- undservicefreundlich ermöglicht das System kontinuierlichen Dauerbetrieb wiez.B. in Windschutzscheiben Produktionsanlagen.

Das Gerät zeichnet sich besonders durch die gleichmäßige Bestäubungaus. Die gewünschte Pudermenge lässt sich in 1% Schritten genaudosieren. So wird der Puderverbrauch minimiert und das Umfeld nichtunnötig belastet. urch seine Modulbauweise wird Langlebigkeit undBetriebssicherheit gewährleistet. Die Systemelektronik überwacht zentralalle Funktionsgruppen und diagnostiziert deren Leistung. Der modulareAufbau des AP - Bestäubers ermöglicht eine schnelle und einfacheWartung.

Eine schnelle Reaktionszeit zwischen Erkennen der Glasplatte undAuftragen von Puder ermöglicht exaktes Bestäuben der Glasplatten - egalwie groß diese sind.

Somit ist es auch möglich, dass Glasplatten unter den Auftragsdüsen Parken können, ohne dass sich das Trennmittel übermäßig anhäuft.

Eine automatische Anpassung an die jeweils gefahreneGlasgeschwindigkeit ist so selbstverständlich, wie das Erkennen der




Glasbreite und das entsprechende Justieren der Auftragsbreite.


AP900 Powder ApplicatorThe Grafotec AP system is an innovative mechanically and pneumaticallyoperating nozzle application system, which is very impressive due to itsreliable and sturdy construction design.

Universally employable, as well as extremely easy to maintain and service,the system allows uninterrupted continuous operation, in such systems asthose for windshield production for example.

The device particularly distinguishes itself due to the even application. Thedesired powder quantity can be measured out precisely in 1% steps, thusminimizing the powder consumption and ensuring that the environment isnot unnecessarily polluted. The modular design guarantees durability andoperational safety. The system electronics centrally monitor all functionalgroups and diagnose their performance. The modular structure of the APapplicator allows rapid and easy maintenance.

A fast response time between glass plate recognition and powderapplication allows the glass plates to be exactly pollinated, whatever theirsize.

This also means that glass plates are able to park under the spraynozzles, without undue accumulation of the interleaving powder.

An automatic adjustment to the respective glass speed is just as much amatter of course as the glass plate recognition and the appropriateadjustment of the application width.


AP950 Powder ApplicatorThe Grafotec AP 950 system is an innovative mechanically andpneumatically operating nozzle application system, which is veryimpressive due to its reliable and sturdy construction design.

Universally employable, as well as extremely easy to maintain and service,the system allows uninterrupted continuous operation, in such systems asthose for float glass or wind shield bending for example.

The device particularly distinguishes itself due to the even application. Thedesired powder quantity can be measured out precisely in 1% steps, thusminimizing the powder consumption and ensuring that the environment isnot unnecessarily polluted.The modular design guarantees durability andoperational safety. The system electronics centrally monitors all functional

groups and diagnose their performance. The modular structure of the APapplicator allows rapid and easy maintenance.

A fast response time between glass plate recognition and powderapplication allows the glass plates to be exactly pollinated, whatever theirsize.

This also means that glass plates are able to park under the spraynozzles, without undue accumulation of the interleaving powder.

An automatic adjustment to the respective glass speed is just as much amatter of course as the glass plate recognition and the appropriateadjustment of the application width.


LA 1000 Liquid ApplicatorThe Grafotec LA - System is an unique mechanical Liquid Applicatorsystem using a basically simple technology. Due to its nearly maintenancefree and extremely service-friendly design, it is particularly well suited for acontinuous operation such as for the production of flat glass in a floatline.By using a DraftControl cabinet and an ReverseOsmosis system you havea totally complete and clean operation. This at the same time solves allpossible environmental control questions, a subject of greatly increasingimportance. The high speed application roller (up to 6000 rpm) produces avery fine mist directed towards the front. The amount of mist leaving thehousing is controlled by the electronically adjustable shutter gap.

By using an automatic curtain width control and by the possibility of varyingthe saturation level of the liquid sprayed, you have the choice of applyingan extremely wide range of liquids with excellent results.


By staggering the individual applicator bars, the unit can cover spray widthsof up to 5500mm. The two outer bars each are equipped with a motorizedbaffle which automatically adjust the spray curtain to the exact width of theribbon. Strategically located sensors lets the spray curtain follow the ribbondrift and watch over the beginning / end of a ribbon as well as over brokenribbons.

Whenever the available city water may not have the required consistency,we recommend the use of our ReverseOsmosis system. This system canbe expanded with a MixingStation, which then runs nearly fullyautomatically.





G r e n z e b a c h M a s c h i n e n b a u G m b H

Address Albanusstraße 1-386663 Asbach-BäumenheimGermany

Telephone 0049-906-982-0

Fax +49-906-982-108

Internet Address www.grenzebach.com


Booth Hall 15 D49








01.10.04 Paper applying machines








02.01.04.01 Mechanical snapping devices

02.05 Laser technology








05.01.01.04 Measurement and control of glass thickness

05.01.01.06 Measurement and control of speed

05.01.01.07 Measurement and control of glass tension


05.01.02.01 Surface, contour and imperfection measurement and control





05.03.03 Optimization systems for cutting and yield



High Speed StackerEven before its official introduction to the market, many customers especially American glass producers - expressed a great interest in theGrenzebach High Speed Stacker. This was developed for stacking smallglass formats from 400 x 500 mm up to 2200 x 1850 mm with high cycletimes.

Using this system, glass sheets run on to a suction belt, that sucks andtransports them to a packet frame. Here the sheet is put down. This actionis repeated until a packet has been created. The glass packet is thentransported to a robot for take-off either from above or from the side forstorage on a glass rack. Here, several packets can be stacked either sideby side or on top of each other.

For small glass sheets, feeding in a double line achieves a high cycleperformance as two packets are built up and stacked in parallel. TheGrenzebach High Speed Stacker is currently the only device which canstack glass sheets in a one second cycle. It can easily be integrated intoexisting side legs.

Producers of automotive glass will particularly appreciate the tin side/ airside stacking option. The excellent stacking qualities of the High SpeedStacker are also perfectly demonstrated in off-line cutting operations.






Enter search key:


Enter search key:


Suchwort eingeben:

G r e n z e b a c h M a s c h i n e n b a u G m b H

Address Albanusstraße 1-386663 Asbach-BäumenheimGermany

Telephone 0049-906-982-0

Fax +49-906-982-108

Internet Address www.grenzebach.com


Booth Hall 11 A40 D








































High Speed StackerEven before its official introduction to the market, many customers especially American glass producers - expressed a great interest in theGrenzebach High Speed Stacker. This was developed for stacking smallglass formats from 400 x 500 mm up to 2200 x 1850 mm with high cycletimes.

Using this system, glass sheets run on to a suction belt, that sucks andtransports them to a packet frame. Here the sheet is put down. This actionis repeated until a packet has been created. The glass packet is thentransported to a robot for take-off either from above or from the side forstorage on a glass rack. Here, several packets can be stacked either sideby side or on top of each other.

For small glass sheets, feeding in a double line achieves a high cycleperformance as two packets are built up and stacked in parallel. TheGrenzebach High Speed Stacker is currently the only device which canstack glass sheets in a one second cycle. It can easily be integrated intoexisting side legs.

Producers of automotive glass will particularly appreciate the tin side/ airside stacking option. The excellent stacking qualities of the High SpeedStacker are also perfectly demonstrated in off-line cutting operations.

G r o n e m e y e r M a s c h i n e n f a b r i k G m b H & C o .

Address Rohrweg 3137671 HöxterGermany

Telephone 0049-5271-9756-0

Fax +49-5271-33866

Internet Address www.gronemeyer.org


Booth Hall 14 A19








02.10.01 Washing machines and equipment




Conveying systemsGRONEMEYER conveying systems for the cold end area. Individualconveying systems associated with modern glass container inspectionequipment.




H a g e r S o n d e r m a s c h i n e n b a u G m b H

Address Weilerweg 586753 MöttingenGermany

Telephone 0049-9083-9696-0

Fax +49-9083-9696-30

Internet Address www.hager-gmbh.de


Booth Hall 15 C49







01.10 Cold end technology for float glass, laminated glass, wired glass and othertypes of flat glass

Portalstapler am kalten Ende

H a n i c G m b H , S o f t w a r e f ü r G l a s

Address Josef-Haumann-Str. 1044866 Bochum-WattenscheidGermany

Telephone +49-2327-8369-0

Fax +49-2327-8369-199

Internet Address www.hanic.de


Booth Hall 14 A35



02.13.02 Software







OPTIPLAN 4OPTIPLAN4 - das brandneue Optimierungssystem für glasverarbeitendeBetriebe und Schneidtischhersteller unter voll graphischerBenutzeroberfläche mit der höchsten derzeitig auf dem Markt verfügbarenFlexibilität.

Das neue System wurde unter der Microsoft Visual Studio.net Umgebungentwickelt und speziell für die neue Betriebssystemgeneration vonMicrosoft Windows XP.

Funktionale Highlights sind z.B. der flexibler Eingabegenerator in dem dieeinzelnen Eingabefelder individuell durch den Benutzer konfiguriert werdenkönnen. Die Bedienung erfolgt wahlweise über Keyboard, Maus oderTouch Screen. Selbstverständlich ist eine wahlweise metrische oder eineEingabe über Zoll (/32, /64, dezimal) möglich.




Lassen Sie sich von der hohen Benutzerfreundlichkeit und von dergeballten Funktionalität aus 20 Jahren Softwareentwicklung überzeugen.

H e a t U p

Address 9 Bell's CourtY062 5BA HelmsleyUnited Kingdom

Telephone 0044-1439-770971

Fax 0044-1439-771110

Internet Address


Booth Hall 15 C31







Heat Up CCTV WannenbeobachtungssystemDas Heat Up CCTV System besteht aus 4 Hauptbestandteilen:Kamera- und Rückfahrsystem,Schaltkasten,Bildschirm und Videorekorder(VCR).Vorbedingungen für das ursprüngliche Konzept des HEAT UP CCTVDesignswaren dabei von Anfang an:einfache Bedienung,Lebensdauer und leichteInstandhaltung.

H E Y E I n t e r n a t i o n a l G m b H

Address Lohplatz 131683 ObernkirchenGermany

Telephone 0049-5724-26-452

Fax +49-5724-26-229

Internet Address www.heye-international.de


Booth Hall 14 A56









01.06.01 Gob feeder















01.06.01 Gob feeder

Servo-Feeder


Heye Information System (HIS)The Process Monitoring of the HIS gives actual information on the conditionof the production process and the quality of the articles produced. Since thearticle defects can be allocated to mould numbers or IS Section numbersthe user receives detailed hints on weak points and improvementpotentials. Terminal programmes that are easy to handle at any places ofyour factory show the current information of the running production ineasy-to-follow graphic displays.

At the terminals manual inputs, such as for example to enter defects, tosend messages, to control mould number rejects, to enter tool changes etc.are carried out with few key actuations only.By the modular design youadapt the system to your production environment and your requirements.

The QC-Online Software controls statistical inspections, which areautomatically carried out in the inspection lines (e.g. measurements withthe PROLASER of INEX or the SPT of AGR). The HEYE QCS Softwareconnects the measuring devices of the quality laboratory with the HIS.Measuring values are stored in inspection reports and displayed by theHPIS Terminal Programmes.

Configuration data and the data gained from the running production arestored in the HIS Data-base. With your own software you have access onall data of the system

The HIS Print Programme automatically prints shift reports at the end of theshift.

It is also possible to print reports of any desired period.By listing the

working period of moulds and tools it is possible to utilize the elements of aset more equally. Counters, inspection and sorting machines can beconnected with the system via a CAN Network, Ethernet or RS232.

Special functions render possible to recognize defective or incorrectlyadjusted inspection machines.

In addition to the process monitoring and quality assurance the HIS offers amodule to calculate production data. This module administrates pallet data(held pallets, released etc.) and calculates the production results underconsideration of failure times. It offers interfaces to ERP-Systems such asSAP for instance.

Under preparation is a maintnenance module which administrates failures,downtimes, repairs or preventive maintenance measures for components ortools in the HIS.

A HIS module for status or consumption measurements among others toreduce energy costs - is also under development.

Heye Process Control with Database FunctionalityThe Heye Process Control, a well-known and well proven tool for real timedisplay and supervision of all pressing processes in the IS-Machine nowhas become much more comfortable in operation. This is obtained by arobust and durable industrial PC inside the control cabinet s housing whichoutside uses the same connectors like the former version.

The operating surface of the software now presents in typicalWindows-style. As already known from the office-PC the graphics can beplaced on the screen as desired and can be varied in size and position. Theentire software was revised; new functions were added. Here especially the Persistance Mode of the page Plunger Motion has to be mentioned. Byit, sporadically occuring faults in the pressing process can be recognizedmuch better.

There is only one software for all IS-Machine variants. By a simple click youcan change between all persently common Single and TandemIS-Machines with up to 60 cavities and between the different Feedervariants as well.

Another successful development step is the database functionality. In anarticle database table for instance all article-type depending parameters arefiled. This simplifies the job change extremely.

Likewise, the basic data of each pressing process are filed in a database. Ifrequested, later on these data can be analyzed and evaluated statisticallyvia the Intranet.

Servo Blank Mould Closing Mechanism




Instead of the standard blank mould bracket this mechanism can beinstalled without any additional machining of the box, too. As basic unit itcan also be applied for all machine sizes using the existing variables suchas mould holders with reverse and non-reverse linkage.

Features:

- Controlled harmonic motion profile

- Motion time up to 400 ms

- Full closing force at the end of the motion

- Closing forces > 12 kN

- Symmetry of forces and motions

- Center axis kept even after wear

Servo Blow Mould Closing MechanismFor this mechanism the pneumatic drive was replaced by a motor spindleunit while maintaining the already existing lever mechanism.

Features:

- Controlled harmonic motion profile

- Motion time less than 500 ms

- Full closing force at the end of the motion

- Variable opening angle (according to article diameter)

Servo-InvertThe Servo Invert is designed as retrofit mechanics. Instead of an existingpneumatically driven invert it can be installed without additional machiningof the IS-box. Existing variables such as neck ring holders and blow mouldhinges can still be used.

Features:

- Controlled and freely selectable motion times

- Motion times up to 320 ms depending on the machine size

- Same drive unit for all machine sizes (4 1/4" TG, 5 ; 5 1/2 and 6 1/4 DG)

- Synchronized opening motion of both neck ring holder halves

Servo-TakeoutThis system can be installed or retrofit in IS Machines of the sizes 4 1/4"TG, 5 ;

5 1/2 and 6 1/4 DG, whereat all conventional takeout arms, takeoutbridges and takeout tongs can still be used.

Features:

- The motion times are freely selectable within the limits

- All times and angular positions are kept with repeatable accuracy

- The system is adjustable in all axes to the mould center as required

- Fine adjustment of the positions possible during operation.

Servo-TakeoutThis system can be installed or retrofit in IS Machines of the sizes 4 1/4"TG, 5 ;

5 1/2 and 6 1/4 DG, whereat all conventional takeout arms, takeoutbridges and takeout tongs can still be used.

Features:

- The motion times are freely selectable within the limits

- All times and angular positions are kept with repeatable accuracy

- The system is adjustable in all axes to the mould center as required

- Fine adjustment of the positions possible during operation.


Stacker 4206


High-Speed Servo Pusher 2155This Pusher is a new high-performance component in the warehandling.Characteristic for this Pusher is that it is driven by three servo motors. Avariable motion profile for these three axes renders possible to positionarticles precisely on the machine conveyor in DG- and TG-operation atconveyor speeds of more than 80 m/minute. Neither compressed air (e.g.for pocket- or jet-air) nor guide rails are needed.

The Pusher can be used for right-hand or left-hand delivery.

Advantages: variable and reproducible motion profiles




simple parameter setting via dialogue

high machine conveyor speeds

Waretransfer 4222

H o r n G l a s s I n d u s t r i e s A G

Address Bergstraße 295703 PlößbergGermany

Telephone 0049-9636-9204-0

Fax +49-9636-9204-10

Internet Address www.hornglas.de


Booth Hall 14 C60





























VibrationsflächeneinlegemaschineAnwendungsbereich:für Elektroschmelzwannen mit kaltem OberbauAufbau und Ausstattung:Einlegekapazität von 4 - 50 to/dGrundrahmen mit Längs- und QuerwagenVibrationsrinneStaubabsaugungSPS-Steuerung

Extras:

- Operator Panel zur Eingabe der ParameterMerkmale / Vorteile:- Gleichmäßige Gemengeverteilung- Gleichförmige Bewegung der Verfahrachsen

durch kraftschlüssigen Antrieb- Langjähriger Einsatz & ausgereifte Technik- Lange Lebensdauer dank stabiler Konstruktion




H o t w o r k I n t e r n a t i o n a l A G

Address Fabrikstrasse 18586 ErlenSwitzerland

Telephone 0041-71-64920-90

Fax 0041-71-64920-99

Internet Address www.hotwork.ag


Booth Hall 13 A37










Kammerazusschmelze

H u b t e x M a s c h i n e n b a u G m b H & C o . K G

Address Werner-von-Siemens-Straße 836041 FuldaGermany

Telephone 0049-661-8382-0

Fax +49-661-8382-120

Internet Address www.hubtex.com


Booth Hall 15 B55



01.13.06 Glass racks for transport and warehouse

01.13.07 Vehicles for glass transport



Modell M 150 (1-Mann-Version)HUBTEX Mehrwege-Seitenstapler können Glaspakete bis zu 20 Tonnentransportieren.

Die HUBTEX M-Serie benötigt nur 1 Fahrer. Hier steht der Bediener aufeiner Plattform über dem Glas.

Diese Bedienperson ist Fahrer und Einweiser zugleich. Vorteile bei dieserAusführung sind optimal freie

Sicht nach allen Seiten beim Fahren und Manövrieren, eine sichereAufnahme der Glaspakete und

geringere Personalkosten.


Elektro-Mehrwege-Seitenstapler,Modell MQ 60




Modell MQ 60

mit Klammervorrichtung zum Handling von 3 verpackten Glaspaketen,

auf Wunsch auch lieferbar für unverpacktes Glas und/oder mit

90°-Drehvorrichtung.

GLASGESTELL-TRANSPORTER VON 8,0 BIS 33 TONNENHUBTEX Glasgestell-Transporter werden in der Flachglasindustrie zumTransport von A- und L- Gestellen

bis 33,0 to eingesetzt. Diese Transporter sind mit Elektro-, Diesel- oderGasantrieb erhältlich und können mit

Vulkollanrädern (PU) für den Innenbereich und/oder mit Gummibereifungfür den kombinierten Einsatz im

Innen- und Außenbereich ausgerüstet werden. Die Aufnahme desGlasgestells erfolgt über synchrones

Anheben des Chassis mit Hubschiene. Durch den speziellen Vertikalhuberfolgt das Anheben des Gestells

sicher und präzise, ohne Versatz. Die Glasscheiben werden beimTransport durch vier hydraulische

Sicherungen gehalten.

H y R a d i x , I n c .

Address 175 West Oakton St.60018 Des Plaines, ILUSA

Telephone +1 847-391-1200

Fax +1 847-391-2596

Internet Address www.hyradix.com


Booth Hall 13 D16-6





Aptus On-site Hydrogen GeneratorHyRadix s Aptus hydrogen generator produces cost-competitive andreliable hydrogen supply at the customer s site. HyRadix s proventechnology is easily applied in a variety of industries including float glass,oils hydrogenation, metals heat treating, and electronics, as well as manyothers.

The Aptus system produces hydrogen from a feed stock of natural gas orliquefied petroleum gases (LPG) and is easily integrated with customers existing manufacturing processes.

We work closely with our customers to assess your exact hydrogen needs.We tailor each system to produce the appropriate flow, pressure and purityof hydrogen. Our team of experts will work with you to evaluate your needsand provide the solution that best meets your hydrogen requirements.

Advantages

Customers using the Aptus hydrogen generator experience immediatebenefits including:

Hydrogen generated on-site, eliminating cost of delivery surcharges, riskof supply interruptions and annual product price increases

Significant total cost reduction compared to alternative hydrogen supply

Integration with the existing natural gas or LPG supply

Fast start-up times

Unattended operation and remote monitoring

Tailored hydrogen purity from 99.95%, using Pressure Swing Adsorption(PSA) technology

Skid-mounted for ease of integration with existing plant operations requiring only connections to feed stock and utility supply

Shop-fabricated and tested to ensure product quality with standardoff-the-shelf components that have demonstrated reliability in industrialapplications

Technology

The Aptus hydrogen generator uses HyRadix s proprietary catalyticautothermal reforming technology to reliably and efficiently produce




high-purity hydrogen.

At the heart of the process, the proprietary reforming converter produces ahydrogen rich gas from light hydrocarbons. The heat required for thisconversion is produced and consumed in-situ, thus avoiding the need for afire-box or other complex indirect heating equipment.

Specifics

Feed:

Natural Gas or LPG

Product Capacity:

50 Nm³/h or 100 Nm³/h

(1900 scfh or 3800 scfh)

Module can operate

between 25% and 100% of

capacity

Product Quality:

Purity: 99.95 to 99.999%

Oxygen: < 0.1 ppmv

Carbon monoxide: < 0.1 ppmv

Carbon dioxide: < 0.1 ppmv

Hydrocarbons: < 1 ppmv

Water: < 1 ppmv

Generated Pressure:

7 barg (100 psig)

Footprint:

2.1 m x 6.1 m

(7 ft x 20 ft)

Utilities per 100 Nm³ hydrogen:

Natural gas: 49 Nm³

Electric power: 30 kWh

Deionized water: 30 liters (8 gallons)

Cooling water: 25 m3/h (110 gpm) circulating

Instrument air: not required

The HyRadix Advantage

HyRadix is committed to meeting our customers hydrogen needs for

industrial and consumer manufacturing processes. Our engineers workclosely with our customers to achieve a seamless transition to on-sitegenerated hydrogen. We provide complete hydrogen solutions and servicesto meet your needs including water purification systems, remote monitoring,training and integration assistance.

At HyRadix, we deliver a superior, efficient and reliable method forhydrogen supply. For an initial consultation on how HyRadix can improveyour hydrogen supply needs, please contact us at:

HyRadix Inc.

175 W. Oakton

Des Plaines, IL 60018

[email protected]

+1 847.391.1200

Link zu weiterer Informationhttp://www.HyRadix.com



Enter search key:


Enter search key:




I . S . M a i n t e n a n c e L t d .

Address Wakefield Road, SmithiesS71 1PA Barnsley, South YorkshireUnited Kingdom

Telephone 0044-1226-297286

Fax 0044-1226-204318

Internet Address www.ismaint.co.uk


Booth Hall 13 A64






I.S MachinesWe supply our machines to the most discerning customers. We can tailorour machines to feature the best technology from third party suppliers. Thisgives our customers the best possible solution for their formingrequirements. Our experience with on site service and maintenance resultsin machines that are extremely maintenance friendly.

Single section upwardsSingle gob, double gob, triple gob4-1/4",5",5-1/2"and 6-1/4" centre distancesTailored to the customers specificationsFormingpack - improves efficiency and speed

I A L L t d

Address Unit 3, Mulberry CourtDA1 4BF Crayford, KentUnited Kingdom

Telephone 0044-1322-520410

Fax 0044-1322-559419-1910

Internet Address www.imageautomation.com

EMail

Booth Hall 12 E59





FastScan for Flat Glass InspectionIn the almost 20 years since its launch, Image Automation s FastScanautomatic inspection system has been the clear market leader in float glassinspection. More recently, systems derived from the original FastScanconcept have been applied to a range of special glasses, such as displayglass and ceramic glass, and treated glasses, such as hard- andsoft-coated glass.

The FastScan system has been applied to the following products:

Float Glass Inspection

FastScan is the undisputed market-leading system, with an installed baseof over 50 systems worldwide.

Coated Glass Inspection

FastScan s unique ability to operate simultaneously in transmission andreflection modes has been demonstrated on pyrolytic, solar control, low-e,and anti-reflection coatings, where it is used to detect defects in both theglass substrate, and the coating.

Display Glass

FastScan s inherent high resolution permits detection of defects a few tensof microns in size at realistic production speeds. FastScan can be used on




flat screen glass, as well as CRT faceplates.

Other Products

FastScan can also offer a competitive edge on other niche-orientedmarkets, such as coated and photographic materials, and other materialswhere high quality is of paramount interest.

Float Glass Inspection - FastScan IIFastScan II product line has been specially developed to inspect float glassas it is made - at speeds of up to 25 metres/minute in ribbons up to 5metres wide. Each system incorporates a scanner, or scanners, used inconjunction with a retro-reflective material on a patented basis, ahigh-speed processing module, and one or more operator interface PCs.Each operator interface PC represents the float-glass line as a scaled"rolling map" of defects - classified and colour-coded by severity - whichcan be used to evaluate float-glass quality on an on-going basis.Quality data provided by FastScan systems is used to direct cuttingoperations downstream - to maximise the yield of shippable glass - and tohelp correct production upstream to eliminate causes of persistent defectsor distortions.FastScan systems not only pinpoint tiny 0.2mm defects, they alsodifferentiate them from dust, dirt and sulphate deposits. By inclusion of theOptical Quality (OQ) module in the FastScan system, the system is alsoable to replace inaccurate and costly off-line zebra measurement, with atotally objective measure that allows for testing of 100% of the glass ribbon.FastScan II systems are available with one, two or four scanning heads,depending on the precise quality requirement. The standard configurationfor automotive float glass employs two scanners. The systems can operatewith or without washing systems, and can be interfaced to any type ofcutting hardware, be it Bystronic, Reliance, Grenzebach, or evenfactory-specific special systems.Two-headed systems will repeatably resolve distorting defects with cores ofless than 0.2mm.Click here for our latest reference listFastScan ReflexImage Automation has recently introduced a new model of itsmarket-leading FastScan equipment - the FastScan Reflex.The addition of a completely new channel takes advantage of a previouslyunexploited aspect of inspection systems - the laser light reflected from thetop surface of the glass.All existing glass inspection systems, both laser and camera based, makeuse of the light passing through the glass. However, some light is reflectedfrom the top surface of the glass, and the new FastScan II Reflex collectsthis light in a new detection channel. This channel greatly enhances

FastScan's ability to detect certain types of defect - in particular, tin defects.SPOTTING TIN DEFECTSThe most important of the tin defects is bottom tin, also known as tinpickup. This consists of globules of metallic tin which adhere to theunderside of the glass ribbon. Viewed from above the glass, each of theseparticles appears like a small round mirror, and so produces a strong signalon the reflection channel. This channel therefore enables FastScan Reflexto greatly improve detection of this type of defect.Previous versions of FastScan use red laser light to interrogate the glassribbon. However, advances in laser technology mean that the FastScanReflex employs a solid-state green laser instead. The shorter wavelength ofgreen light enables a smaller laser spot size to be produced, which leads toa significant increase in resolution.Another advantage of the green laser is that the detection of weaklydistorting or non-distorting body bubbles (a problem area for camerasystems) is dramatically improved.These enhancements come on top of the host of other improvementsintroduced to FastScan systems in the last few years, such as distortiondetection and on-line zebra testing.

Link zu weiterer Informationhttp://www.imageautomation.com/fastscan/default.html

I c e b e l , L d a .

Address Rua da Franca, Z.I. Casal da Lebre2432 Marinha GrandePortugal

Telephone 351-244-5453-10

Fax 351-244-5453-19

Internet Address www.icebel.com


Booth Hall 13 C12








PGLASS300PGLASS300

PGLASS300Description:PGLASS300 is a palletiser with a completely automatic cycle ans it wasconceived to solve all the problems that appear in the palletisation of glasscontainers. The palletisation quality is an essential factor that will not onlycondition the pallets packaging,but also its movement,storage,transport anddepalletisation.PGLASS300 guarantees this purpose with a perfect vertically of the bottleslayers,one upon the other.The mechanical conception and the modularity ofthe various sub-groups of PGLASS300 allows choosing manyconfigurations in its final implantation

PGLASS300(2)PGLASS300 (2)

Main features:-Load pallet max.height:2400mm-Load pallet max.weight:1200kg-Minimal diameter of items to palletise:48mm-Operating capacity:up to 3layers/minute-Installes power:10kW

I C S I n e x I n s p e c t i o n S y s t e m s

Address 13075 US 19 North33764 Clearwater, FloridaUSA

Telephone 0001-727-535-5502

Fax 0001-727-532-8513

Internet Address www.icsinex.com


Booth Hall 13 C45






MiniLabPrecision Measurement System

Reliable, consistent dimensional and finish inspection, and pressure testingof a variety of glass containers

The intelligent, turn-key, dual-infeed Minilab machine vision system is acomplete, cost effective, and labor-saving sampling solution for maintainingthe quality control of glass container production. This system reduces labor,minimizes waste, reduces liability and maximizes profits.

The MiniLab system features high resolution cameras with telecentricoptics, sophisticated container handling and superior algorithms, providinga turn-key system for quality control of glass container manufacturing.

I f G I n g e n i e u r b ü r o f ü r G l a s t e c h n i k G m b H

Address Brunnweinbergstraße 1971334 WaiblingenGermany

Telephone 0049-7151-487977-0

Fax +49-7151-275-207

Internet Address www.ifg-glass.com


Booth Hall 15 E23














02.10.02 Brushing, high-pressure and ultrasonic systems


02.11.08 Chemicals


03.11.03.01.06 Surface coating materials




EPS Economic Powdering SystemEPS Economic Powdering System, world wide 500 installations in 37countries, excellent powder homogeneity and adhesion of separatingpowder on the glass.

Link zu weiterer Informationhttp://www.ifg-glass.com

EPS Powdering System for windscreens / windshielsEPS powder application system for powdering windscreens / windshieldsbefore the bending process.



Undertable Loader / Offloader

Very high-speed undertable oscillating stacker / loader for small andmedium sizes.



Universal Gantry RobotVery high speed glass stacker / loader for thin-glass, small sizes and slitfloat sizes.



Handling aid for glasseshandling aid for screen-printed glasses in front of toughening plant



ConveyorsBelt conveyors for inspection lines with particularly smooth glass transport.

Link zu weiterer Information




http://www.ifg-glass.com



Suchwort eingeben:


Enter search key:


Enter search key:

I M S E n g i n e e r i n g L t d

Address Unit S1B, Tursdale Business ParkDH6 5PG Tursdale, County DurhamUnited Kingdom

Telephone 0044-191-377-8880

Fax 0044-191-377-8881

Internet Address www.imsengineering.com


Booth Hall 13 A09





01.04.11 Processing of water cooling for cullet treatment





The Lancaster crusherThe Lancaster Model 24x32 Roll Crusher is used extensively throughoutthe world in the glass manufacturing industry where high quality andreliable service are required.This Single Pass Material Crusher is designed to reduce materials of agiven product size to a minimum size of 95 percent minus 3/4 inch, at ratesup to 30 tons per hour. Provisions are made to permit particle size variationfrom 3/4 inch to 2 inches.

Link zu weiterer Informationhttp://www.imsengineering.com/glass/glass_lancaster.htm


IMS Scraper Conveyor




The IMS Scraper Conveyor is the ultimate in hot glass transfer technology,designed to offer the end user a reliable labour saving alternative to culletrecycling. The IMS Scraper embraces mining technology to offer the perfectsolution to cullet handling with a proven track record in glass plantsworld-wide.

Link zu weiterer Informationhttp://www.imsengineering.com/glass/glass_scraper.htm

I n h o m - 9 8 L t d .

Address South Industrial Zone9154 AksakovoBulgaria

Telephone 359-5-113-3071

Fax 359-5-113-2196

Internet Address www.inhom98.com


Booth Hall 13 A83





Demi John 300 cl

I N M A R A A G

Address Witzbergstrasse 238330 Pfäffikon ZHSwitzerland

Telephone 0041-44-95110-50

Fax 0041-44-95110-90

Internet Address www.inmara.com


Booth Hall 13 E53







type ES600DCThe stacker type ES600DC was for the first time put in operation in 1996and has undergone continuous improvements.The machine has 3 respectively 4 servo axis (stabiliser bar), which can beprogrammed individually. Through this even complex stacking motions canbe achieved.




I n t c o G m b H

Address Zur Drehscheibe 592637 WeidenGermany

Telephone 0049-961-398-8949

Fax +49-961-398-8717

Internet Address www.intco.de


Booth Hall 12 E31





Feuerfeste ErzeugnisseLieferspektrum sind vorwiegend standardisierte FF-Produkte, die vonausgewählten Lieferanten bezogen werden. Für diese Produkte geltenunsere Intco- Eigenschaftsvorgaben, welche einerseits auf unserelangjährige Erfahrung basieren, sowie die etablierten internationalenStandards wie ISO und PRE-Recommendations berücksichtigen.Alle Materialien werden vor Versand einer sorgfältigen Qualitätsprüfungunterzogen.

I n t e r g l a s s S . A . d e C . V .

Address Lateral Sur, Periferico Nte 559,ParqueIndustrial Belenes Nte.45150 Zapopan, JaliscoMexico

Telephone 0052-33-3793-8800

Fax 0052-33-3793-8811

Internet Address www.interglass.com.mx


Booth Hall 13 C88






Interglass BiogreenInterglassoil Biogreen is a new and improved shear water coolant lubricantthat has been designed to mix instantly with water creating a very stableemulsion while providing a clean shear cut.Interglassoil Biogreen iscompounded with the highest quality of base stock material in addition towetting and dispersing agents, Interglassoil Biogreen should virtuallyeliminate buildup and blockages throughout the system. InterglassoilBiogreen has a green color and is formulated with totally biodegradablecomponents and should not present any problems to water effluents.




I R I S I n s p e c t i o n M a c h i n e s

Address 21, rue Marcel Pagnol69694 Venissieux CedexFrance

Telephone 0033-4-72783527

Fax 0033-4-72783507

Internet Address www.iris-im.com


Booth Hall 13 D31







05.02.04 Controls for glass inspection machines





EVOLUTION 1 - STAND ALONE FINISH INSPECTOREVOLUTION 1 offers complete inspection of the finish thanks to highresolution camera

A new generation of light sources

- Characteristics (fotometrics, geometrics) are computer driven.- Universal light sources (same source from dark glass to white glass).

EVOLUTION 1 Innovations

The concept of EVOLUTION 1 allows :

· Quick and easy job change· To improve repeatability of adjustment between 2 machines

· No mechanical and nor optical adjustment

FINISH INSPECTION

Visual inspection of container finish :

· Line Over Finish· Blisters· Stones· Overpressed· Unfilled· Scaly· Sugary top· Wire edge



Enter search key:


Enter search key:





Enter search key:

I - S c a n R o b o t i c s L t d .

Address Hasharon Industrial ParkKadimaIsrael

Telephone 972-9-89127-80

Fax 972-9-89127-81

Internet Address www.iscanrobotics.com


Booth Hall 14 D18

















Condor FlexCondorFlexI-Scan s new generation of the well proven Condor Multi Purpose RoboticStacker is a higly versatile and comprehensive robotic workcell.Until now, flat glass manufacturers have settled for inflexible stackingsystems able to handle one size/quality at the time, using differentmechanisms for stopping and aligning the glass plates.The Condor Flex presents the ideal solution for a flexible production mix ofsplit, LES & Jumbo size plates.The system is composed of two heavy payload synchronized industrial6-axis robots, with an additional 7th axis enabling he robots to travel onlinear slides in parallel to the float-line. The robots are capable of pickingdifferent plates sizes or qualities on-the-fly, and palletize them fullyautomatically.It is possible to handle at the same time one Jumbo plate or two differentLES/Split size plates.Advantages of the CondorFlexIncreased Flexibility- Simultaneous handling of various sheets sizes and qualities- Reduced set-up time- Multiple destinations- Landscape/Portrait unloading and stacking with no need formechanicalrotation- Stacking onto wide range of racks and boxesReduced Capital Investment- Installed next to an existing and running float line- Directly on the main line, no need for a side-leg/transfer- On-The-Fly handling eliminates the need to stop and align the glassplates- Reduced floor space- No need for civil work preparation such as cullet system or indexingplatformOn-Line Implementation- Perfect solution for running lines, and cold repairsMaximum Safety- The CondorFlex provides an impressive safety system incorporating aclosed zone with safety fences and switches.Improved Quality




- Integrated Hawkeye real-time cut-glass vision inspection system- Gentle vacuum gripping- No mechanical glass squaring


HawkEyeIscan's Glass Inspection System both inspects and sorts each and everycut glass sheet. By using advanced web technology, the system detectsmarks, edge errors, cracks, and skews and analyzes glass dimensions.More importantly, this is all done with absolutely no interruption to theproduction line at whatever speed it is running at.

I t a l c a r r e l l i S . r . L .

Address Via Monte Rosa 936072 Chiampo (VI)Italy

Telephone 0039-0444-623393

Fax 0039-0444-420195

Internet Address www.italcarrellisrl.com


Booth Hall 12 D36





TPENCarrello a piattaforma per il trasporto di vetro su cavalletti ad "A" oppure a"L" con capacita' di carico fino a 33000 Kg. Il sistema di sollevamento e' unbrevetto ITALCARRELLI¨® denominato "Sicur - Lift" che garantisce, anche in caso di rotture, lamassima stabilita' del carico. Su richiesta sono disponibili attrezzature per ilbloccaggio del vetro sul cavalletto. Dimensioni della piattaforma e portatadel carrello sono a richiesta del cliente.

The TPEN is designed to transport glass on stillages with load capacity upto 33.000 Kg. The lifting system is an ITALCARRELLI® is patent pendingcalled "Sicur - Lift", that guarantees, also in breakcase, the maximunstability of the vehicle even if it is loaded. Special lock glass system byarms for "A" or "L" stillages are available on request. Platform dimensionsand load capacity of the vehicle are on request

J C L E n g i n e e r i n g P t e L t d

Address 10, Anson Road, #23-04, InternationalPlaza079903 SingaporeSingapore

Telephone 0065-6225-4867

Fax 0065-6223-8298

Internet Address www.jochenlee.com


Booth Hall 13 B11






JCL Press MachineJochenlee (JCL) develops and manufactures various models of pressmachines according to customer's need.Since the founding of our company in 1952, we have produced more than100 press machines for the glass industry, including JP-12, JP-16, JPK-12,JPKD-12 and JPDG-24.These machines can be used for producing glass tumblers, bowls, plates,tea cups, beer mugs, water jugs, juice blenders etc. Customer can choosethe most suitable press machine models based on their own specificationsand requirements.

We have a team of highly skilled glass production professionals andmachinery experts ready to provide any technical assistance and to build




the most suitable press machine for the glass plants.

J o h n s o n M a t t h e y N o b l e M e t a l s

Address Orchard RoadSG8 5HE RoystonUnited Kingdom

Telephone 0044-1763-253589

Fax 0044-1763-253313

Internet Address www.noble.matthey.com


Booth Hall 15 E16





ZGS Platinum MaterialsThe use of platinum and its alloys, such as 10% rhodium/platinum, is wellestablished in the glass industry. However, their applications often meanhigh temperature operation of these materials. At high temperatures thesematerials are weak and subject to creep.They are also subject to contamination failure.Johnson Matthey has developed a form of platinum, Zirconia GrainStabilized (ZGS), that is resistant to grain growth, the effect ofcontamination and deformation at high temperatures.An exclusive development by Johnson Matthey, ZGS platinum materialsoffer significantly improved performance over conventional platinum and itsalloys.

Link zu weiterer Informationhttp://www.noble.matthey.com/product/detail.asp?article=2

J S J J o d e i t G m b H

Address Am Nasstal 1007751 JenaGermany

Telephone 0049-3641-6229-20

Fax +49-3641-6229-40

Internet Address www.jsj.de


Booth Hall 15 C28


















oxy-fuel fired furnaces- perfect glass quality

- significant energy savings




- comaratively low investment

costs

- low NOx- and dust emission

- safe and smooth operation

suitable for following glass types:

- borosilicate glass

- neutral glass

- soda-lime glass

- E-fibre glass

- lead glass

- TFT-glass

- glass ceramics


Electric FurnaceAdvantages:

- compact design

- high specific glass pull

- low energy consumption

- constantly high glass quality

- easy to operate

- minimum air pollution

suitable for following glass types:

- low-expansion borosilicate glass

- special soda-lime glass (incl. STN)

- opal glass

- lead glass

- optical glass

- enamel and frit

- alumo-borosilicate glass



Enter search key:


Enter search key:

K a n t h a l , Z N d e r S a n d v i k G m b H

Address Aschaffenburger Straße 764546 Mörfelden-WalldorfGermany

Telephone 0046-220-216-67

Fax 0046-220-211-26

Internet Address www.kanthal.com

EMail

Booth Hall 13 A75








KanthalKanthal Super is the standard heating element in melting pot furnaces.Kanthal Super, Superthal flat panels or silicon carbide heats feederforehearths, and Kanthal Super/Superthal is used for extra downdrawheating.Kanthal is the worlds leading supplier of silicon carbide elements to thefloat glass industry.Continuous furnaces for glass bending, toughening etc. are heated bymetallic wire elements or flexible Fibrothal heating modules

Kanthal Super Heating ElementsHigh power and long life electric heating elements for use up to very hightemperatures. Manufactured as ready-made elements, straight or bent in abroad range of standard and special dimensions and shapes. Used mainlyin laboratory furnaces and production furnaces in the glass-, electronics-,steel-, ceramics and heat treatment industry.Six grades with specific features for use in new demanding applicationsand atmospheres. Kanthal Super can now be used directly in nitrogen,hydrogen, vacuum and mixtures of endogas and reducing atmospheres.

K a p p e l G m b H , R o b e r t

Address Schlachthofstraße 3/587700 MemmingenGermany

Telephone 0049-8331-4487

Fax +49-8331-82962

Internet Address www.kappel-flachglastechnik.de


Booth Hall 12 E32





DS2-12VTechnische Daten· Zweikreissystem· 10 St. Sauger Typ 388, Fabr. Kappel· 800 kg Tragfähigkeit· manuell Drehen: 270°· manuell Kippen : 90°· 2 Stück Akku· 250mm Bedientiefe

K a r a r m a z K a l i p S a n . v e T i c . L t d . S t i .

Address Rami Kisla Cad. Emintas, Rami San.Sit.No.:38534140 Bayrampasa-IstanbulTurkey

Telephone 0090-212-544-7416

Fax 0090-212-612-9105

Internet Address www.kararmaz.com


Booth Hall 14 A26





Formen für GlasindustrieKararmaz Kal p konstruiert und fertigt Formen für IS, Autopresse, H-24,H-28, Schleuder und TT Maschinen.

Link zu weiterer Informationhttp://www.kararmaz.com




K a v e h G l a s s I n d u s t r y G r o u p

Address No. 08 Lida St., North of Vanak Sq.1969743434 TehranIran

Telephone 0098-21-877-2325

Fax 0098-21-877-2329

Internet Address www.kavehglass.com


Booth Hall 11 B06




03.01 Flat glass


03.01.02 Drawing glass

03.01.06 Glass for gardening uses

03.01.07 Wired glass

03.01.08 Figured glass / Profiled architectural glass

03.01.12 Decorative colored glass

03.02.04.03 Heat insulation glass

03.02.04.04 Sun protection glass

03.02.06 Mirrors

03.02.08 Other coated types of glass

03.02.13 Low maintenance glass

03.11.01.04 Automotive glass




Soda Ash

The best quality of mineral stones, modern machinery and longexperiences of our experts are the reasons of our success in the world ofglass.



Enter search key:

K e r a g l a s s E n g i n e e r i n g S . r . l .

Address Via Sassogattone, 7/B42031 Baiso / REItaly

Telephone 0039-0522-9930-27

Fax 0039-0522-9930-30

Internet Address www.keraglass.com


Booth Hall 16 A21



















02.09.02.02 Laminated glass technology with foil for automotive glass



DryerRoller electrical drier.This is a unique machine in its kind on the market. Its main features are:small dimensions, high production capacity and reliability.The standard configuration (just 7 metres of length) can fully dry silk-screenprinted or glazed glasses so that they can be stored immediately in avertical position to save a lot of space inside the company.The speed of the ceramic rollers as well as the temperatures of the differentmodules can be adjusted from 2 to 8 metres/minute directly from theoperator panel.Thanks to its fully stainless steel construction and to the technical solutionsused, no maintenance operation is required, and the machine is highlyreliable even under the heaviest working conditions.


Roller glazing machineRoller glazing machine for flat glass panes of any shape.This machine can apply a wide range of glazes (hot, cold, water-basedglazes, etc.) and any possible effect can be achieved: satin finish(acidulated effect), double satin finish, masking, etc. with any colouravailable on the market to meet any modern requirement in the furnishingand architecture fields.Each motor is electronically controlled through the operator panel so thatthe operator can adjust the machine with an accuracy up to 0.1mm makingit possible to glaze glasses with any type of effect.The machine is made up of stainless steel and the technical solutionsadopted ensure a quick colour change and an easy machine adjustmentdepending on the different types of glaze used.

K h a v a r B o l o u r C o .

Address No. 40, 1st Floor, Kashflan AL., SheikBahaee Ave, Molla Sadra St.19936 Tehran-QomIran

Telephone 0098-912350-5042

Fax 0098-229338-2043

Internet Address


Booth Hall 13 D85





Moulds for Glass productionsKhavar Bolour is specialized in all kinds of press moulds for different kindsof glassware.

In order to meet the increasing demands of our respectable customers,Khavar Bolour has planned an expansion project. The goal of expansionproject is production of glass moulds for containers to be used inIS-machines and also press and blow machines.




K ö r t i n g H a n n o v e r A G , B e r e i c h W , I n d u s t r i e - u n d P r o z e s s w ä r m e ,F e u e r u n g s t e c h n i k

Address Badenstedter Straße 5630453 HannoverGermany

Telephone 0049-511-2129-0

Fax +49-511-2129-223

Internet Address www.koerting.de


Booth Hall 13 A28







Firing systems for the glass industryFor decades now Körting, as providers of complete firing systems, fulfils allequipment demands for the manufacturing of flat-, hollow- or technicalglass. Körting offers a port know-how based on over 80 years of experienceand accordingly the right firing system for every furnace.

Körting's service package includes project-based advice, calculations andconstruction so that an object-related optimum flame position andmaximum economic heat transfer to the smelt is assured whilst stillobserving the environmental aspect of the whole.

Consulting and engineering include the project-related designing of firingsystems according to the:

- Körting Underport System

- Körting Sideport System

- Körting Throughport System

Following intensive consultations with the customer, Körting plots the bestsuited burner arrangment for the individual plant in question. With due

observance being paid to furnace type, dimensions, fuel and technicalconditions, Körting then prepares a proposed equipment layout

- port cross-section

- crown- and floor angles

- number of lances and

- lance arrangement

under the aspect of a best possible combustion, energy conversionbetween the flame and the melt and pollutant emission.

Burner equipments

· oil- and gas burner lances with high heat transfer effectivity and lowpollution(NOx) for regenerative melting tank applications for

- Underportinstallation

- Sideportinstallation

- Throughportinstallation (water cooled)

burner port design for an effective heat release in the melting tank underconsideration of ecological requirements (low pollution NOx)

· solid fuel combustion equipments (petrol coke) for regenerative meltingtanks

· oil- and gas burners with high heat transfer effectivity and lowpollution(NOx) for recuperative melting tank applications for combustion airtemperatures up to 800°C

· oil- and gas-Duoblock burners for working ends, sand driers, temperingfurnaces and other auxiliary furnaces of the glass industry

· oil- and gas-Monoblock burners for sand driers, tempering furnaces andother auxiliary furnaces of the glass industry

· premix burners for feeders

· gas-Monoblock burners for the heating of annealing and decorating lehrs

Oil firing plants for melting tanks

· Station units for light- and heavy oil acc. to DIN 51603 or equivalent, with:

- reversal tracks for the change over of the fuel gas acc. to theregenerative- reversal sequence

- reversal tracks for the change over of the atomising medium (compressedair or steam) acc. to the regenerative- reversal sequence

- fuel flow control tracks with oil flowmeter and flow control valves(pneumatic/ electric actuated) for the oil flow control

- pressure control tracks for the oil pressure control




- online-oil heaters for heavy oil-elektric-, steam- or thermo oil- heated

- oil viskosity measurement/ - control

- oil operation pumps

- insert oil heaters for oil storage tanks

- oil discharge tracks for trucks or railway wagons

· electric/ electronic control equipment for the oil firing plant

· design, supply, assembly, commissioning, service

Gas firing plants for melting tanks

·station units for fuel gases (natural gas, LPG, town gas, coke oven gas),with

- reversal tracks for the change over of the fuel gas acc. to theregenerative- reversal sequence

- fuel flow control tracks with gas flowmeter and flow control valves(pneumatic/ electric actuated) for the gas flow control

- gas pressure control tracks with safety shut-off valve

- main gas safety track gas- emergency cut-off

- gas filtering track

- gas-/ air- mixture plants

- LPG vaporizing plants

· electric/ electronic control equipment for the gas firing plant

· design, supply, assembly, commissioning, service

K r e i s e l G m b H & C o . K G

Address Mühlenstraße 3802957 KrauschwitzGermany

Telephone 0049-35771-980

Fax +49-35771-981-02

Internet Address www.kreisel.biz


Booth Hall 14 B57







01.04.10 Filter techniques



ZellenradschleusenAustrag & Dosierung von Gemenge u.a. durch kontinuierlichesAusschleusen bei gleichzeitigem Luftabschluss

weiterhin: Doppelpendelklappen, Absperrschieber

Link zu weiterer Informationhttp://www.kreisel.biz


SchlauchfilterGewebeascheider für diverse Stäube, auch Zyklonabscheider undNaßabscheider

Link zu weiterer Informationhttp://www.kreisel.biz


gekühlte EinlegerinnenLink zu weiterer Informationhttp://www.kreisel.biz




K R S R e c y c l i n g S y s t e m s G m b H

Address Voitschlag 14A94481 GrafenauGermany

Telephone 0049-8552-5282

Fax +49-8552-5160

Internet Address www.krs-recycling-systems.com


Booth Hall 12 E22




01.03.09 Colour sorting (cullet)




automatic sorter for the glass recycling industrycolour sorter,

- csp sorter,

- all metal sorter -

- special glass sorter for heat resistant glass,

colour sorter for the glass recycling industrycolour + csp sorter type "Spektrum" for:

- flint glass cleaning

- amber glass recovery

- colour sorting of mixed glass

- csp sorting


Turn key glassrecycling plants- Advice

- Planning

- Engineering

- Assembling

- Start up

- Training

- Service

- automatic glass recycling sorters

K S O - G o b i O f e n b a u G m b H

Address Am Güterbahnhof 2147608 GeldernGermany

Telephone 0049-2831-86038

Fax +49-2831-87589

Internet Address www.kso-gobi.de


Booth Hall 9 B45





HRF 6




Optimum heating technique electrical infra-red elements

Easy to use, easy loading, free of pollution

Temperature control by standard micro-processor

Full kiln insulation, two-layer insulation

K T G E n g i n e e r i n g L t d .

Address 60 Savile Street EastS4 7UQ SheffieldUnited Kingdom

Telephone 0044-114-2759955

Fax 0044-114-2700875

Internet Address www.ktengineering.com


Booth Hall 13 A23










Zedtec's Rapid Cool Technology

for shorter forehearths, higher glass pulls and reduced head-loss.

Typically, up to 700 m³/h of cooling air can circulate through thesuperstructure and extract 175kW of excess heat from the glass. In designterms, this means that a forehearth can be significantly shorter, a majoradvantage where space is limited.

A forehearth fitted with a rapid cool section achieves much higher coolingrates than a traditional forehearth because it makes air pass twice throughthe superstructure archblock via the forehearth atmosphere. First the air isfed into the central longitudinal manifold and then passes through a seriesof slots into the upper part of the combustion chamber. It then expandsunder the effect of heat, mixes with products of combustion and finally fluesthrough two lateral manifolds along the side of the superstructure controlledby air dampers.

In terms of production, this means the possibility of boosting the output by20% on existing forehearths due to improved cooling.

L a n g e n d o r f G m b H

Address Bahnhofstr. 11545731 WaltropGermany

Telephone 0049-2309-938-0

Fax +49-2309-938-190

Internet Address www.langendorf.de


Booth Open area at Hall 13 01





Langendorf Floatliner




On this year s glasstec Langendorf is presenting another milestone in theworld of float glass transportation. In intensive tests the aerodynamic of thenew Floatliner was optimised; also the driving safety and operatingconvenience was further developed.

With know-how from more than 125 yrs of experience in the production ofcommercial vehicles and more than three decades of Floatliner productionLangendorf creates solutions for many different applications of glasstransportation.

The advantages of Floatliners are convincing:

- Excellent aerodynamic

- Driving safety on highest level

- Optimal protection of the glass against breakage and humidity

- Solid and professional manufacturing

Link zu weiterer Informationhttp://www.langendorf.de/Floatliner.73.0.html

L a n g e n d o r f G m b H

Address Bahnhofstr. 11545731 WaltropGermany

Telephone 0049-2309-938-0

Fax +49-2309-938-190

Internet Address www.langendorf.de


Booth Hall 13 A93





Langendorf Floatliner

On this year s glasstec Langendorf is presenting another milestone in theworld of float glass transportation. In intensive tests the aerodynamic of thenew Floatliner was optimised; also the driving safety and operatingconvenience was further developed.

With know-how from more than 125 yrs of experience in the production ofcommercial vehicles and more than three decades of Floatliner productionLangendorf creates solutions for many different applications of glasstransportation.

The advantages of Floatliners are convincing:

- Excellent aerodynamic

- Driving safety on highest level

- Optimal protection of the glass against breakage and humidity

- Solid and professional manufacturing

Link zu weiterer Informationhttp://www.langendorf.de/Floatliner.73.0.html



Suchwort eingeben:


Enter search key:





Suchwort eingeben:

L a s e r Z e n t r u m H a n n o v e r e . V . ( L Z H )

Address Hollerithallee 830419 HannoverGermany

Telephone +49-511-2788-0

Fax +49-511-2788-100

Internet Address www.lzh.de


Booth Hall 11 A40 F








02.02 Drilling technology




02.05.03 Laser-removing technology

02.05.04 Laser-fusing technology





Fügen und Formen von RohrglasProzessmerkmale:

Rußfrei, kein Wasserniederschlag, präzise TemperaturfeldformungHoheTemperaturstabilitätVerbinden dickwandigerBauteileProzesszeitverkürzung gegenüber der FlammeAnwendungsbeispiele:

SolarthermiekollektorenRöntgenkolben

L A T A n t r i e b s t e c h n i k G m b H & C o . K G

Address Venneweg 2848712 GescherGermany

Telephone 0049-2542-910-0

Fax +49-2542-910-290

Internet Address www.neudecker-jolitz.de


Booth Hall 14 D64





FlachmotorenDrehstrom und Einphasenwechsel-Strommotoren in Flachbauweise.

Produktbeschreibung




Durch ihre kompakte und Platz sparende Bauweise sind Flachmotorenideal zum fräsen, kappen, ritzen, bohren, sägen, zerspanen oder schleifen sowohl in komplexen Maschinensystemen, in denen hohe Ansprüche,besonders an die Laufgenauigkeit und Leistungsstärke der Antriebseinheitgestellt werden, als auch in einfachen Maschinensystemen wo es um einegünstige und zuverlässige Antriebslösung geht. Unsere Flachmotorenlaufen auch unter schwierigsten Bedingungen störungsfrei.Durch ihre kompakte und Platz sparende Bauweise sind FlachmotorenIn der Serienausführung werden die Motoren für 50/100/150 oder 200Hzausgelegt. Hierbei decken sie einen Leistungsbereich von 0,5 kW bis 50kW ab.Durch ihre kompakte und Platz sparende Bauweise sind FlachmotorenDie Flachmotoren werden in drei Hauptgruppen unterteilt:Durch ihre kompakte und Platz sparende Bauweise sind FlachmotorenK62, K75 und K112. Innerhalb dieser Hauptgruppen gibt es weitereUntergruppen, welche eine sehr individuelle Auslegung der Motorenzulässt.Durch ihre kompakte und Platz sparende Bauweise sind FlachmotorenDiese sind vollkommen geschlossen, und oberflächengekühlt. Sie könnenje nach Bedarf für die Schutzart:Durch ihre kompakte und Platz sparende Bauweise sind FlachmotorenIP 54, IP 55 oder IP 65 ausgelegt werden.Durch ihre kompakte und Platz sparende Bauweise sind FlachmotorenDurch die Lebensdauerschmierung der Lager sind Flachmotoren nahezuwartungsfrei und bedienungsfreundlich.

ReibradgetriebemotorenMechanisch stufenlos verstellbarer Antrieb mit reibschlüssigerKraftübertragung für horizontale und vertikale Anordnung, lieferbar in neunBaugrößen.

Produktbeschreibung

Nimmt die Drehzahl im Abtrieb ab, steigt das Drehmoment dies ist dasGrundprinzip der Reibradgetriebe. Anders als beim FU-Betrieb bleibt dieMotorleistung bei abfallender Drehzahl konstant, und das Drehmomentsteigt. Durch die stufenlose Verstellbarkeit des Reibradgetriebes sindsowohl Untersetzungen, als auch Übersetzungen möglich.Reibradgetriebe finden ihren Hauptanwendungsbereich in der Textil-und Lebensmittelindustrie.Die Kraftübertragung erfolgt durch ein bzw. zwei hintereinanderangeordnete Reibradpaare.Die zur Leistungsübertragung notwendige Anpresskraft wirdbelastungsabhängig von einer Nockenkurve erzeugt. Den für den Anlaufnotwendigen Anpressdruck leitet eine Druckfeder ein. Durch Betätigung derStelleinrichtung ändern sich die wirksamen Durchmesser von An- und

Abtriebskegel. Hierdurch wird eine Drehzahländerung erreicht.Durch das Motox® - Baukastensystem ist es möglich, das Reibradgetriebemit weiteren Komponenten zu kombinieren

L i n d e A G , L i n d e G a s D i v i s i o n

Address Seitnerstraße 7082049 PullachGermany

Telephone 0049-89-7446-0

Fax +49-89-7446-1230

Internet Address www.linde-gas.com

EMail

Booth Hall 13 A36


01.02.02 Industrial gases













HeliumThe air constitutes of 78 percent nitrogen, and 21 percent is oxygen, - oneof the most common elements on earth, 85 percent of the oceans and 60percent of the human body is oxygen.




One percent of the air is Helium is the second lightest element and the onewith the lowest boiling point, -268,9°C. Helium is recovered mostcost-effectively from natural gas. Long-term contracts guarantee access tosources in the USA, Europe and North Africa.

Linde is for the moment building a helium liquefaction plant in Skikda on theeast coast of Algeria, which will go on stream in 2005.

Link zu weiterer Informationhttp://www.linde-gas.com/international/web/lg/com/likelgcomn.nsf/docbyalias/prod_ig

HydrogenHydrogen is the lightest of all elements and constitutes 90 percent of theknown universe. The gas may be obtained by means of a steam-reformerfrom steam, natural gas or other light hydrocarbons. Refineries andelectrolytic processes employed in chlorine chemistry also generatehydrogen-rich gases from which the hydrogen can be recovered. All thesemethods are used by us, e.g., in Leuna, Buna, and Bitterfeld in Germany,and the Milazzo refinery in Sicily.

Liquid hydrogen is manufactured by liquefaction at -253°C and istransported in its liquid state, reducing transport costs.

Our Ingolstadt plant is Germany's sole industrial plant for hydrogenliquefaction.

Link zu weiterer Informationhttp://www.linde-gas.com/international/web/lg/com/likelgcomn.nsf/docbyalias/prod_ig


Oxy Fuel burner technology:Besides gas supply, Linde can offer for all gas melting surfaces heated withfossil fuels applications technology consisting of Oxy Fuel burner systemsand control systems for oxygen and fuel.

The range of products available from Linde includes all types of lances andburners, especially (as a result of more exacting demands for Oxy Fuelburner technology) controllable Oxy Fuel burners.

These are characterised by the following:

* Adjustment and control possibilities for changing the flame shape, theflame length, the flame position and the NOx formation with the sameburner power.

* Changeable nozzle inserts for adapting to the required performancerange.

* An adjustable burner holder for obtaining the optimum burner position.

* All the equipment with quick-action fixtures for improved handling.

Link zu weiterer Informationhttp://www.glassglobal.com/directory/glass/profile/document.asp?ID=32301&qry=&char=&country=&category=&page=



Enter search key:


Suchwort eingeben:

L i n n - H i g h T h e r m G m b H

Address Heinrich-Hertz-Platz 192275 EschenfeldenGermany

Telephone 0049-9665-9140-0

Fax +49-9665-1720

Internet Address www.linn.de


Booth Hall 9 B40















Induction heated lab furnaceLaboratory unit for melting of different materials and continuous pulling of

quartz glass capillaries up to 2000 °C under protective gas. The furnace is

heated by a 10 kW-medium frequency inverter via a graphite susceptor.

Induktiv beheizter LaborofenLaboranlage zur Herstellung von Schmelzen und zum kontinuierlichenZiehen

von Quarzglaskapillaren bis 2000 °C unter Schutzgas. Die Beheizungerfolgt

durch einen 10 kW-Mittelfrequenzumrichter über einen Graphit-Suszeptor.

L i y a G l a s s C o . I n c . ( P . J . S . ) F l o a t G l a s s L i n e

Address 175 Avenue Mirdamad19116 TehranIran

Telephone 0098-21-2225-6615

Fax 0098-21-2222-7384

Internet Address

EMail

Booth Hall 10 E79





Clear and colored float glassLiya is a leading manufacturer of clear and colored float glass inthicknesses ranging between 2-12 mm and a production capacity of 400tons per day. Our production line is equipped by a state of art machineriessupplied and installed by Glaverble of Belgium S.A.




L o g i c o n E n g i n e e r s P v t . L t d .

Address 45-48 Mahavir Centre, Sector 17,Vashi400 703 Navi Mumbai, MaharashtraStateIndia

Telephone 0091-22-78927-51

Fax 0091-22-78927-50

Internet Address www.logiconengineers.net


Booth Hall 13 B72





Glass Industry

Logicon offers the following products for the Glass Industry:Annealing and Decorating Lehr

Cold-end and Hot-end Coating EquipmentsSingle-line ConveyorsCombustion and Control Equipments for Melter and Fore Hearth

Annealing and Decorating LehrsAdvantages Low fuel consumption per ton of glassPossibility to use any source of energy, viz. Gas, Oil, ElectricityModular construction, enabling easy shipment and installationRigid and channel-type construction, resulting in very low maintenancecost and long product lifeEfficient control system, using Siemens / Alan Bradley or similar controllersPLC and standardized hardwareIdeal circulating pattern, using efficient re-circulating fansStrong pre and post sales service by skilled manpowerConfiguration available upto belt width 5500 mm

Cold-end and Hot-end Coating EquipmentsDesigned to improve mechanical properties of bottles

Ease of handling and transportation of bottles, reducing breakage duringtransportationThe primary objective of enhancing burst strength is accomplishedimmediately.At the production line, excellent container flow is ensured

Single-line ConveyorsCustomised solutions to fit the inspection and packing requirement

Suitable to install any type and make of inspection machineDesigned for high speeds, including Tandem machine outputLines designed for fully automatic operation, with bi-direction tables foraccumulation and unloadingCan be designed for any size and shape of bottles, including perfumeryand vialsModular construction, allowing upgrades / modifications in the futureAll components used are of standard make and reputed brands and strongpre and post sales service by skilled manpower

Combustion and Control Equipments for Melter and Fore HearthPossibility to use any form of energy, i.e. Gas, Oil

Designed to suit all burner applicationsEquipped with features such as regulation, safety, flow control and flowreversalArmed with pumping, heating and straining units, for heavy oil or withthyrister controlled electrical heating




L o g i s t i c S y s t e m P i c h l e r G m b H

Address Heinrichsbrunn 24310 MauthausenAustria

Telephone 0043-723-842-15

Fax 0043-723-829-249

Internet Address www.logistic-system.at


Booth Hall 12 E32







Blower trolleyUsed for storing and loading different sizes of single panes as easy aspossible. Optionally with 50 compartments (or 60 for Type FW60) which areseparated by plastics coated split rods. A plastic plate with end-to-endmilled slots (width 12 mm) provides save transport and stocking. Type VHKis due to it's construction well suited for curved, oval or round glass ormirrors. High load capacities and ball bearing rolls allow easily movement.Surface of frame is coated in RAL3020.


Glass Transport RackGlass transport frames are used for internal and external transport of flatglass. They are exactly tailored to customer's needs and can save a lot oftime and money.

A rugged steel tube construction, special glass locking and rubber profilesassure save and secure glass transportation.

BULL-Series:To secure glass panes we're using belt strips which can be attached in aready-made grid (bottom). The belt is placed upside and clamped by a beltclip.

All rolling glass racks are equipped with roller bearing. For securing glasspanes allRUNNERtypes can be supplied with a height-adjustableGLAS FIX

Providing a huge variety ofstandard typeswe are able to cover a multitude of application areas.

L ö w i n g e r G m b H

Address Reichenbacher Straße 1697702 MünnerstadtGermany

Telephone +49-9733-8140-0

Fax +49-9733-8140-20

Internet Address www.loewinger.de


Booth Hall 14 A16








03.07.06 Laboratory glass

03.07.07 Other types of special glass






Disposable syringe machineType P3/K/200-SPZ-R/S1


Double capillary blowing machine with turning facilityType T4 B7 A-420/ S.D.W.

L W N L u f t t e c h n i k G m b H

Address Hühndorfer Höhe 701723 WilsdruffGermany

Telephone 0049-35204-29716

Fax +49-35204-29717

Internet Address www.lufttechnik-lwn.de


Booth Hall 13 D67







Enter search key:


Suchwort eingeben:

L y n c h S y s t e m s , I n c .

Address 601 Independent Street39817 Bainbridge, GAUSA

Telephone 0001-229-248-2345

Fax 0001-229-243-0987

Internet Address www.lynchsystems.com


Booth Hall 14 C77


01.06.01 Gob feeder









CRT PressADVANCED DRIVE AND TAKEOUT

Hydraulic table drive with patented trunnion mounted drive and cushioncylinders. Drive and cushion rods pinned directly to rotator arm.Graduated port cushion sleeve with flow designed to assure positive oilcooling. Total lock-to-lock index time of 1.5 seconds for HDTV, 1.2seconds for the HTM, and 1.0 seconds for the HDP.Outboard inline takeout in hydraulic mounted in position 8, or position 6 for11 station machine.QUICK COOLING

Wind drum and distributor for table and mold cooling. Individual inletdampers for internal table and mold cooling with externally actuated basketvalves in each mold position.Air formers with straight or offset design with external guide columns andvalues per article release.Article release cooler with 203.2 mm inlet diameter. Individual on-off andadjustable butterfly valves.RIGID PRESSING

Press head plunger guide system with V-guides and adjustable wear pads.System operates with either fixed or floating plungers. Plunger height rangeof adjustment is full range of stroke. Fixed plunger is adjustable in X, Y, andZ axis.

For the HDTV Press, pressing cylinder yoke up to 27 inches (685.8 mm)thick with provision for up to 10 inch (254 mm) bore pressing cylinder.Maximum pressing force capability in excess of 80 tons.Adjustable or fixedanvil to support table on each side and behind pressing position.Adjustablesub-base assembly for precision positioning of machine ±12 inches (304.8mm) in X and Y axis. (±7 inches on HTM).


Lynch HLT-11 TVStraight air flow design air formers with external guidecolumns and operating pneumatic cylinder, and each airformer equipped with on-off butterfly valve, adjustablebutterfly valve and optional electronic servo air valve forclosed loop system.3 air formers with 8 in. (203 mm) or 12 in. (304 mm) inletdiameter.

Improved trunnion-mounted drive allows for easier maintenance, as well asincreases longevity of the system. Hydraulic table also features cushioncylinders.Available Options

Shell transfer for operation in either forward or reverse direction.Shell Transfer position is moveable to accommodate 5 or 6 shells.Shell lift has three guide columns and standard, single double-acting widthadjustment with breakaway lift fingers, or optional leveling fingers.Electric Servo shell transfer system includes standard pneumatic vertical liftcylinder or optional hydraulic lift.Maximum pressing force capability of 60 tons.Choice of fixed or floating plungers.Power moveable anvil to support table on each side and behind pressingposition, or optional static anvil.Take-out position at station 6 or station 8.

M . E . S c h u p p I n d u s t r i e k e r a m i k G m b H & C o . K G

Address Neuhausstraße 4-1052078 AachenGermany

Telephone +49-241-93677-0

Fax +49-241-93677-15

Internet Address www.schupp-ceramics.com


Booth Hall 13 E48













ThermoTubeThermocouple Protection Tubes (Al2O3) up to 1,800°C

Link zu weiterer Informationhttp://www.schupp-ceramics.com


MolyCom, SiliComElectric Heating Elements MolyCom (MoSi2) up to 1,800°C and SiliCom(SiC) up to 1,800°C


MolyTecFiber Heating Panels up to 1600°C


TinOxiMelting Electrodes(SnO2)




Enter search key:

M . T . F o r n i I n d u s t r i a l i S . r . l .

Address Via Pialoi, 10430020 Marcon / VenedigItaly

Telephone 0039-041-4569356

Fax 0039-041-4567002

Internet Address www.mtforni.com


Booth Hall 14 D65





TANK FURNACESU-Melter, gas fired, 12sqm, for clear




M D I S C H O T T A d v a n c e d P r o c e s s i n g G m b H

Address Am Getreidespeicher 755120 MainzGermany

Telephone +49-6131-7321-0

Fax +49-6131-7321-101

Internet Address www.mdischott-ap.com


Booth Hall 11 A44









02.01.02 Glass saws



02.03.01 Grinding techniques for flat glass



02.05.05 Components and accessories (Laser technology)


02.07.02 Components and accessories for display glass technology


02.11.01 Tools


02.13 Suppliers for the glass machinery industry


03.11.01.01.07 Machinery/tools

03.11.03 Glass finishing

04.01 Glazing tools


04.02 Cutting, grinding and drilling tools




Enter search key:

M e r k a d M a k i n a K a l i p S a n . V e T i c . L t d . S t i .

Address Gumussuyu Cad. Karacabey Sok.No:10Davutpasa34020 IstanbulTurkey

Telephone 0090-212-483-0710

Fax 0090-212-483-0727

Internet Address www.merkad.com


Booth Hall 14 A09








Basket H28

Engraved

H-28 5inch Standart Blow Mould Holder

New type 5inch H-28 Blow Mold Holder

O-90 AND H28 Type Neck Ring Holder

Press & Blow Moulds




Press Group

Stem Group

Stemware

M e r k l e E n g i n e e r s , I n c .

Address 100 Perry St., P.O. Box 31261036 Galena, IllinoisUSA

Telephone 0001-815-7772100

Fax 0001-815-7772106

Internet Address www.merkleengineers.com


Booth Hall 13 A41







THE MERKLE MODULAR CHARGERThe newest in our line of state-of-the-art blanket batch chargers offersimpressive solutions to many of your charging challenges. A small versionof our Single Pan machine, the modular charger can be made in widthsfrom 1-2 meters, to be used for very small furnace openings, or in sets toaccommodate any doghouse application.Easier HandlingManageable modules move into and out of position more easily than withthe larger machines.Programming of Batch DistributionWith an electronic synchronizer, multiple units can be configured toproduce feed profiles unavailable with wider units. Pan separations of25mm give the modular unit the ability to retain batch log formation that isotherwise available only on larger machines.Lower Impact of Inactive MachineEach unit is small so that removal of one module from service hastemporary minor impact on profile and negligible effect on batch feed rate.

CONSIDER OUR OPTIONS




As part of our continued commitment to customizing our product for yourneeds, Merkle is pleased to offer a variety of equipment options, includingAC or DC motors, controllers, air or water cooling on pan and pusher bar,center-cooler mounting provisions, stairs, ladders, a variety of clutches orcouplings, and tractive devices for positioning the unit.


Merkle Bay-0-SealThe Merkle Bay-0-Seal is comprized of blocks of cast and fired sillimaniterefractory assembled in a steel frame and suspended above the spout,covering the entrance to the tin bath. This design provides an excellentagainst atmosphere discharge from the tin bath.The Bay-0-Seal can be raised and moved during spout changes. TheMerkle Bay-0-Seal, with its unique design can usually be put back intoservice, where other solutions may not withstand thermal cycling.

Nitrogen can be introduced through the side or roof blocks of the MerkleBay-0-Seal, for operational flexibility.Merkle has been supplying Bay-0-Seal systems for over 30 years. Let ourexperience work for you. The Merkle Bay-0-Seal can both improveproduction efficiency and complement the long-campaign furnace.

M e t a l t e c n o S . r . l . U n i p e r s o n a l e

Address Strada Asi Via Cornete03024 Ceprano / FRItaly

Telephone 0039-0775-911254

Fax 0039-0775-911223

Internet Address www.metaltecnonline.it


Booth Hall 12 B11





Glass edge position sensing transducer

N.3 servo axis squaring station

Rotating pick and place with on board 180°rotating gripper




M E T A V I L , L d a

Address Travessa das Andorinhas2430-048 Marinha-GrandePortugal

Telephone 351-244-572-960

Fax 351-244-572-969

Internet Address www.metavil.pt


Booth Hall 14 E65





Our mouldsMoulds for simple or double glob blow and blow or press and blowpackages.

M e t r a V e r r e

Address Route d'Eu76340 Blangy-sur-BresleFrance

Telephone 0033-2-32974400

Fax 0033-2-32974449

Internet Address www.metra-verre.fr


Booth Hall 13 F12





FormenAccessoires

M i n e r a u x e t M a c h i n e s

Address 120, Rue de Courcelles75017 ParisFrance

Telephone 0033-1-42673201

Fax 0033-1-43804546

Internet Address www.minerauxetmachines.com


Booth Hall 10 E34





Super Beacon Star




Porte meule Ø 200 mm - Norme CE Motor 1/2 hp. - 1450 T/Mn 220 VT 50 Hz Shaft Ø 19.05 mm Heavy still 5 mm Big place under the Ø 200 mm wheels. You can make a piece of 270 mmheight You can mount a wheel or expending drum plus a polishing disc on eachend of the shaft for a total of four positions. (Flexodisc, mini wheels,Diamond plates.) Overhead water manifold with two valves

Dimensions : L 590 mm x l 530 mm x H 500 mm Weight : 55 Kgs

Options Ø 200 mm Blades Adaptator, Pump.

M o p a v i d , S . L .

Address Ramon Marti Alsina, 5608911 BadalonaSpain

Telephone 0034-93-3847180

Fax 0034-93-3846850

Internet Address www.mopavid.com


Booth Hall 13 C37





Moulds for the automatic glass industryMoulds for the automatic glas industry in Cast-iron, steel and bronze. Aswell as for packaging as for flaconnage.

Accessories.

Own foundry.

M S K V e r p a c k u n g s - S y s t e m e G m b H

Address Benzstraße47533 KleveGermany

Telephone 0049-2821-506-0

Fax +49-2821-506-188

Internet Address www.msk.de


Booth Hall 14 C61






01.13.05 Warehouse technology





MSK Schrumpfverpackungen-Einzigartige LösungenAußergewöhnliche Anforderungen an die Palettenladungssicherungprägten in den vergangenen drei Jahrzehnten die Technik der MSKSchrumpfverpackungsanlagen. Auf der Grundlage mehrer MSK Patentesowie in enger Zusammenarbeit mit führenden Unternehmenverschiedener Branchen entstanden wegweisende Lösungen fürbranchenspezifische Anforderungen.




N a b e r t h e r m G m b H

Address Bahnhofstraße 2028865 LilienthalGermany

Telephone 0049-4298-922-0

Fax +49-4298-922-129

Internet Address www.nabertherm.de


Booth Hall 9 C52









Haubenöfen mit Wanne GW 830 - GW 8000Volumen: 690 - 4700 lMax. Temp.: 900 °CFür das Wölben und Biegen von komplexen Glasformen, wie z.B.Glasmöbel, Duschkabinen, etc. bietet Nabertherm eine modular aufgebauteModellreihe von Wannenöfen an.

N e w H u d s o n C o r p o r a t i o n

Address 57077 Pontiac Trail48165 New Hudson, MIUSA

Telephone 0001-248-437-1701

Fax 0001-248-437-0420

Internet Address www.newhudson.com


Booth Hall 13 B40










STAINLESS STEEL LEHR AND LIFT OUT ROLLERSClearly the Industry Leader, New Hudson Corporation has manufacturedseveral thousand Stainless Steel Rollers for over (130) different float glasslines worldwide since 1964.

Lehr rollers produced to the most exact specifications anywhere in theworld. Look to New Hudson when the most precise quality is required, andlet us help improve the quality of your glass.

Stainless rollers are typically manufactured in 305, 216 and 203mmdiameters and in 25/20, 25/12, 18/8, 25/4 chrome/nickel alloys. Criticalmanufacturing specifications include:

Size Control (Outer Diameter)Concentricity and RoundnessSurfaceFinishWall Thickness ControlResidual UnbalanceDimensional StabilityHeatTreating Vertical Stress Relief




N i r v a n a T e c h n o l o g i e s ( P ) L t d .

Address A3/492, Sahakar Nagar,Part-2, Chembur400 071 MumbaiIndia

Telephone 0091-22-2551-8312

Fax 0091-22-2550-6916

Internet Address http://www.nirvanatec.com


Booth Hall 15 C21



02.13.02 Software





PLUS 2D for Glass



Enter search key:

N o r d d e u t s c h e S e e k a b e l w e r k e G m b H & C o . K G

Address Kabelstraße 9-1126954 NordenhamGermany

Telephone 0049-4731-82-0

Fax +49-4731-82-1301

Internet Address www.nsw.com


Booth Hall 17 C60





NSW Kunststoff- und Umwelttechnik... fertigt spezielle Produkte für eine große Vielfalt industrieller undkundenspezifischer Anwendungen. Zu diesen Produkten gehören:

POLY-NET® extrudierte knotenlose Netze für den Schutz empfindlicherOberflächen und Kanten, Zwischenlagegitter zur Verwendung als flächigerKratzschutz, Gitter für den Einsatz in Waschprozessen sowie Gitterrohreals Stützkörper in der Filtrationstechnik und komplette Filterkerzen.POLY-NET® LAUBSTOP Kunststoff-Gitterrohre schützen Dachrinnen vordem Verstopfen durch heruntergefallene Blätter.SECA® Zahnriemen für die Antriebs- und Fördertechnik, SECAflex®Hochleistungszahnriemen und NSW Profilriemen.BIO-NET® und SESSIL® sind die Trägermaterialien zur biologischenReinigung kommunaler und industrieller Abwässer.

NOR-PAC® -Hochleistungsfüllkörper werden in Absorptions- undDesorptionsanlagen zur Wasseraufbereitung und Abgasreinigungeingesetzt. Für die Abscheidung von Feinstaerosolen aus Prozess- undAbgasströmen sowie zur Ölnebelabscheidung liefert NSW einzelneKomponenten und komplette Aerosolabscheideanlagen.

Seekabelanlagen




Neue Telekommunikationsanwendungen in Verbindung mit derGlobalisierung, dem Freihandel und der Deregulierung haben zu einererheblichen Steigerung der globalen Nachfrage nachÜbertragungskapazität geführt. Auch die jüngsten Turbulenzen auf deninternationalen Kapitalmärkten und die heutige Nachfrageschwächekonnten diesen Trend hin zu beständigem langfristigen Wachstum nichtaufhalten. Verstärkerlose Glasfaserkabel von NSW bieten Netzbetreibernein hohes Maß an Systemflexibilität, Aufrüstbarkeit und Erweiterbarkeit undhelfen ihnen so dabei, eine Reihe technischer und kommerziellerAnforderungen zu erfüllen.

Das Angebot von NSW umfasst:

LWL-Seekabel & Zubehör für verstärkerlose Seekabelanlagen.

Schlüsselfertige Seekabelanlagen für etablierte Netzbetreiber undInvestoren, die neue verstärkerlose Unterwasser-Telekommunikationsnetzeerrichten möchten.

Reparatur & Wartungdienste für Seekabelanlagen, um eine optimaleVerfügbarkeit und Zuverlässigkeit des Seekabelsystems zu gewährleisten.

Lösungen für die Integration von Offshore-Ölförder- &Energieerzeugungsanlagen, die speziell auf die besonderenTelekommunikationsanforderungen der Offshore-Industrie zugeschnittensind.

SpezialkabelAls einer der weltweit führenden Lieferanten für Spezial-, Unterwasser- undLandkabel bietet NSW eine große Auswahl an Produkten, um dieBedürfnisse der Industrie zu befriedigen:

Offshore-Kabel für eine Vielfalt von Anwendungsbereichen, wie ROV-,Pflug-, Energie- und Steuerkabel.

Kunststoffisolierter Wickeldraht für den Einsatz in elektrischenTauchmotoren.

Netzsondenkabel für die pelagische Schleppnetzfischerei.

Lichtwellenleiter-Erdseilluftkabel (STARWay OPGWs) für terrestrischeBackbone-Telekommunikationsleitungen und Mikrokabelanlagen (MCSs)für innerörtliche LWL-Leitungen zu Unternehmen und privaten Haushalten.

N O V A X I O N

Address Chemin la Draillette13550 Paluds de NovesFrance

Telephone 0033-4-9095-4186

Fax 0033-4-9095-4186

Internet Address


Booth Hall 14 C15





01.06.09 Injector machines






Enter search key:




O C M I - O T G S . p . A .

Address Via Venezia Giulia, 720157 MilanoItaly

Telephone 0039-02-3909-181

Fax 0039-02-3570-944

Internet Address www.ocmigroup.com


Booth Hall 14 D63








F.A.36 Ampoule Forming MachineContinuous-action rotary machine with 36 vertical spindles for formingampoules from glass tube.


FPC Series Rotary Fire Polishers

A full range of turntable fire polishers, suitable for small and mediumproduction runs.

O f f i c i n e M i s t r e l l o S . r . l .

Address Via dell'Artigiano, 1335040 Ponso / PDItaly

Telephone 0039-0429-95046

Fax 0039-0429-657825

Internet Address www.mistrello.it


Booth Hall 16 F29





Handler




O m c o I n t e r n a t i o n a l N . V .

Address Industriepark Venecolaan 109880 AalterBelgium

Telephone 0032-9-3742005

Fax 0032-9-3743469

Internet Address www.omcomould.com


Booth Hall 14 A38







We mould it for glassOMCO offers a wide range of products and services to the hollowglassindustry:

1) Foundry

Especially developed casting materials for glass moulds in

grey and nodular iron and aluminium bronze

2) Moulds and mould accessoires for the production of packaging glass, inparticular for :

a) Food

b) Beverage

c) Cosmetics

d) Spirits

e) Pharmaceuticals

3) Moulds and mould accessoires for table ware and pressed glass

articles

4) Hot glass handling products

O p t i m a S . r . l .

Address Via Crevalcore, 5/C40017 San Giovanni in Persiceto /BolognaItaly

Telephone 0039-051-826336

Fax 0039-051-825182

Internet Address www.optima.it


Booth Hall 16 B40








OPTY-WAYThe OPTY-WAY® program is a useful reference for entering, optimizingand managing work orders for materials to be cut. This package is the endresult of years of specific design research, co-operation and in-the-fieldexperience by skilled engineers who are experts on solving companyproblems.

Because all procedures are fully automated and self-guided, even the mostinexperienced users will quickly and easily learn the program's variousfunctions.

OPTY-WAY® has been fully developed with a 32-bit platform on theWindows XP operating system. It has therefore all technical features of thisoperating system, thus being totally compatible with it. Any peripheral orpointing system, such as printers and mice, supported by Windows98/ME/XP and 2000/2003 are automatically compatible with Opty-Way®.




O r i M o u l d T e c h n o l o g y C o . , L t d . , S u z h o u

Address Southeast Development Zone, No. 9YinheRd., High-Tech Ind. Park215533 Changshu, JiangsuChina (Rep.)

Telephone 0086-512-5230-0099

Fax 0086-512-5230-2555

Internet Address www.ori-mould.com


Booth Hall 10 B20-H





Bottle Mould

O S C S . p . A . , G l a s s M o u l d F a c t o r y

Address Via Enrico Fermi, 3/520090 Assago / MIItaly

Telephone 0039-02-4880-506

Fax 0039-02-4880-198

Internet Address www.oscmould.com


Booth Hall 14 C71





OSC ProductsOSC know how enables the Company to realize a product in cast-iron andbronze-alluminium, which satisfies the technical needs of Bottero,Heye-Glass, BDF and Ehmart machines, that use NNPB, BB, PBprocesses for the bathproduction of hollow glass such as bottles, jars andflasks.




P a n n k o k e F l a c h g l a s t e c h n i k G m b H

Address Händelweg 523556 LübeckGermany

Telephone 0049-451-47008-0

Fax +49-451-47008-37

Internet Address www.pannkoke.de


Booth Hall 15 A37






04.01 Glazing tools



Vakuum handling techniquePannkoke Vacuum technology world leader. In the field of vacuumhandling technology you ll find that we have the largest and widest productrange available world-wide.

Link zu weiterer Informationhttp://www.pannkoke.de


Vakuum handling technique

Pannkoke Vacuum technology world leader. In the field of vacuumhandling technology you ll find that we have the largest and widest productrange available world-wide.

Link zu weiterer Informationhttp://www.pannkoke.de



Suchwort eingeben:


Enter search key:




P a r k i n s o n - S p e n c e r R e f r a c t o r i e s L t d .

Address HolmfieldHX3 6SX Halifax, W. YorkshireUnited Kingdom

Telephone 0044-1422-254472

Fax 0044-1422-254473

Internet Address www.parkinson-spencer.co.uk


Booth Hall 15 D73






System 500 Forehearth - Heating and CoolingThe roof block geometry used in the System 500 technology

effectively divides the forehearth into three lateral chambers. The

central chamber is used as a conduit for a longitudinal, forced

convection cooling system in which cooling air is injected into the

forehearth chamber at the start of each cooling zone and

exhausted through a central flue at the end of the zone. The

cooling air flow rate and the position of the exhaust damper are

automatically controlled. In addition the forehearth is configured

with side flues which, when operating in cooling mode, allow the

combustion gases to exhaust from the forehearth without

entering the central cooling section. These exhausts are also

fitted with automatically controlled damper blocks. When

the system is operating in heating mode, the cooling air

control valve and side dampers are closed

automatically. This forces the combustion gases

into the centre of the forehearth resulting in a

rapid increase in glass temperature. In this mode

the central flue is used to exhaust the combustion

gases. By automatically controlling the rate of

cooling air, combustion gas and the position of the

side and central dampers the influence of the cooling

and combustion within the forehearth can be varied and the

degree of thermal conditioning controlled.


The MF-16-MC ForehearthThe design limitations associated with a forehearth width of 16 and

the trend towards larger scale production has seen advances in

forehearth design and innovation concentrated on large tonnage

forehearths. Consequently the needs of the small-scale producer have

largely been ignored. To address this problem PSR has developed a

unique conditioning system for 16 wide forehearths. This system,

called the MF-16-MC Forehearth, utilises an automatically controlled

central cooling system and has been successfully applied to

forehearths with pullrates below 20 tonnes per day.

The System 500 ForehearthThe result of an intensive research and development

program utilising both physical and mathematical

modelling techniques, the System 500 technology has

been specifically designed to optimise the thermal

conditioning process in the forehearth. Launched in the

early 1990 s the System 500 forehearth is currently

operated by glass producers in almost 40 countries world

wide. These installations range from large 150 tonnes per

day production lines to smaller 20 tonnes per day producers.

Irrespective of the scale of production the System 500 provides the

degree of thermal conditioning demanded by glass producers in the




21st century.

P - D R e f r a c t o r i e s , P - D I n d u s t r i e s G m b H * F e u e r f e s t w e r k e W e t r o

Address Wetro-Siedlung 13-2202699 PuschwitzGermany

Telephone 0049-35933-7-0

Fax +49-35933-7-476

Internet Address www.feuerfest-wetro.de


Booth Hall 13 A48









Geformte ErzeugnisseTonerdereiche Steine (50-99% Al2O3)Bauxitsteine, keramisch undchemisch gebunden (60-85% Al2O3)Sillimanitsteine, keramisch undchemisch gebunden (55-80% Al2O3)Korundsteine (60-99%Al2O3)Spezialsteine (chromhaltig, zirkonhaltig)Schamottsteine (25-50%Al2O3)SpezialschamottsteineeisenarmCO-Beständigkeit AhoheAbriebfestigkeitSiliciumkarbidsteine (40-85% SiC)Zirkonsteine (60-65%ZrO2Feuerleicht- und Isoliersteine

P E M C O I n t e r n a t i o n a l c / o P E M C O E m a i l s S . r . l .

Address Via delle Industrie, 924040 FilagoItaly

Telephone 0039-035-9002011

Fax 0039-035-9002693

Internet Address www.pemco-intl.com


Booth Hall 10 F26



02.11.09 Highly opaque special colours and conductive silver pastes for automotive glass

03.11.03.02.06 Glass paints




Glass Frits for Feeder ColourationBased on its almost 90 years of experience in enamel and ceramic fritsmelting, PEMCO now also offers a special line of glass frits for forehearthcolouring.These high performance frits are used by the glass industry for theproduction of coloured bottles, flaconnages, tableware, glass buildingblocks and other products.

PEMCO International is providing glassmakers with a wide range ofstandard colours like blue, green, black and brown as well as specialcolours such as pink, purple and violet.These colourants have found quick acceptance throughout the glassindustry due to their outstanding processing properties and excellent colourconsistency.

Through a continued focus on research and a close co-operation with theglass producers, PEMCO can quickly develop and supply special colouringfrits which are adapted to the glass composition and the forehearthprocessing parameters of the customers.




P e n e l e c t r o L i m i t e d

Address Thamesgate House, Victoria AvenueSS2 6DF SouthendUnited Kingdom

Telephone 0044-1702-333007

Fax 0044-1702-333107

Internet Address


Booth Hall 13 C71








Electric and Mixed-melt Furnace SystemsElectric melting offers the energy efficient and environmentally friendlyalternative to fuel-firedfurnace systems for a number of different glass types including:- High quality tableware (soda-lime)- Lead crystal- Lead tubing (lighting)- Container glass- Low expansion borosilicate- Neutral glass (medical)- Fluoride and phosphate opals- Insulator and fibreglass- Ophthalmic- Flat glass (mini float)Most Penelectro furnace systems utilise the vertical melting (VM) principle,and can either be cold-top (CTVM) or hot top (HTVM) depending on thetype of glass and required production flexibility. The shape, format andelectrode type will also be determined by the glass composition. All

incorporate proven designs coupled with advanced monitoring and controlequipment.Penelectro will also undertake special furnace design projects normallyon a joint development basis with the client when there are a particularset of requirements that a standard type system will not satisfy, or when anew process is under investigation. Group resources allow full trial melts tobe conducted if required.

P e n n e k a m p G m b H & C o O H G , E r n s t

Address Königsfelder Straße 38-4258256 EnnepetalGermany

Telephone 0049-2333-605-0

Fax +49-2333-605-200

Internet Address www.pennekamp.de


Booth Hall 14 E25














PENNEKAMP HOT END AUTOMATION




Pennekamp is a major manufacturer for the Hot End TransportationSystems in the various Glass Industries. With the long expertise inengineering such systems it makes the company the preferred choice inturn key solutions. The Automation Systems cover the following Areas:

Container Glass & Table Ware:

Transfer units cross conveyors and lehr stackers

Display Glass

TV Glass Manufacture (Panel & Funnel)

Display Glass Manufacture

TV Tube Industry (CRT)

Display Industry (LCD, PDP, TFT)

Specialty Glass


PENNEKAMP LEHRSPennekamp is a manufacturer of a wide range of lehrs and ovens, whichonly refer to the manufacture of processing of glass in the various designs,shapes, etc. In detail this refers to annealing, decorating, tempering /toughening, thermal processing, bending, sealing, vacuum exhausting,baking and other productions involving thermal processes in batch type orcontinues operation lehrs and ovens. The following are samples of thePennekamp scope of supply.

Products are as follows:

Container Glass & Table Ware

TV Glass & Display Glass Manufacture

TV Tube Industry (CRT) & Display Industry (LCD, PDP, TFT)

Flat Glass

Specialty Glass

For more specific and confidential designs please contact Pennekampdirectly by telephone, fax or email.


PENNEKAMP DECORATING LEHRThe Decorating Lehr design follows the standard Pennekamp modularsections at a length of 2,25m. However Pennekamp has introduced somewell proven details in order to make the lehr more efficient and productivityas well as to reduce energy consumptions. In addition a special attentionhas been drawn to the O2 content inside the lehr during the process toensure a perfect quality.

lehr belt width of up to 4,5 m

all heated sections with heat-resistant stainless steel inner hoods,circulation fans, lehr belt crates

stainless steel front plates to avoid any corrosion particles getting into theproduction

fully insulated lehr up to the cold end (insulation 300 mm plus 25 mmceramic fiber mat)

maximum outside wall temperature of 20°C above ambient temperature

direct shaft circulating fans, no V-belt ( maintenance free)

process controlled air inlets at the fast cooling sections

reacts to production stops to hold the temperature curve

electronical control system to automatically optimize air movements insidethe lehr to recover energy and cut down the consumption (Draft Control)

automatic oxygen level control

special fan blades at cold end to mix together the cold air with internal airbefore it gets contact with the glass

system ensures optimal temperature distribution across the lehr belt width

easy to adjust belt tracking device at the lehr belt drive

internal belt return with self-cleaning device

controlled exit temperatures

compact burner system covering all safety devices as:

central air extraction fan to reuse heat energy

electrical heating system based on thyristor units for control

Option:

PLC to control with operator panel


PENNEKAMP COLD END TREATMENTThe Glass Treatment within Pennekamp has a long tradition. The companyhas always focused not only on the core business as a lehr manufacturerbut seen itself as a Production Line Supplier.The Glass Treatments are tobe seen as a required process to either protect the material during theongoing handling in transportation and filling.

Cold End Spray (Top)

This reliable Cold End Spray was designed to fulfill today s requirements inthe Container Glass Industry. It is a solid steel construction mounted ontothe Lehr Discharge Table by use of rails for accurate positioning.




Under Belt Spray

This reliable Under Belt Spray was designed to fulfill today s requirementsin the Container Glass & Table Ware Industry. For some specialapplications and products the requirement of a Under Belt Spray is requiredto apply the protective coating also to the base. This area is normally notcoated at all.

It is a solid steel construction mounted onto the Lehr Discharge Table byuse of rails for accurate positioning.


PENNEKAMP POLYMER COATINGPOLYMER APPLICATION SYSTEM PAS 650

The concept is to provide the Container Glass Industry with a newtechnology to increase the internal pressure strength of non returnablecontainers by coating them with a tough Polymer to heel flaws and toprotect the surface from all kinds of abrasion during it s way to the finalcustomer. At the same time this technology allows to reduce weights, to bemore competitive on the market against other packaging materials andcompensate for the coating cost.

Task:

provide a new technology for light weighting

increase internal pressure strength of non returnable containers

reduce glass weight

competitive market situation against other packaging materials

increase productivity and efficiency

Solution:

polymer coating with a even thickness of approx. 3-5 um

covering entire surface including the base

internal pressure strength increases of approx. 40-60 %, before and afterline simulation

Machine Concept:

compact, solid stainless steel construction

gripper mechanism to pick up entire lehr rows

smooth container handling

no glass - glass contact prior to the coating

single step dipping process

variable coating thickness

UV curable polymer

container release back onto the conveyor belt

Benefits:

machine to fit onto any existing production line

no additional factory space required

on-line coating process

very low coating costs

P e n n i n e I n d u s t r i a l E q u i p m e n t L t d

Address Commercial Rd., SkelmanthorpeHD8 9DT HuddersfieldUnited Kingdom

Telephone 0044-1484-864733

Fax 0044-1484-865235

Internet Address www.pennine.org


Booth Hall 13 C32





Conveyor ComponentsConveyor Components




HPLHead Protector Link (HPL), this product has been developed by PennineIndustrial to eliminate pin head wear and increase chain life.

The HPL allows the chain to be run closer to the transfer or dead plate,improving product transfers between the IS machine and conveyor

Machined PlasticsMachined Plastics

Pennine Industrial Equipment are committed to a continual capitalexpenditure programme to ensure that we stay at the cutting edge andprovide top quality products economically.Continuing investments have been made in the latest CNC machiningcentres, CNC lathes and CAD / CAM systems.

Static TypeStatic Type.

This series of mechanical cluthes are designed for occasional engagmentand disengement of transmission drives when the shafts are stationary.

This coupling is available in 15 standard sizes.

For more details please view our on line catalogue here or contact oursales department here.

P K I - T e p l o t e c h n a B r n o s p o l . s r . o .

Address Anenská 675/4602 00 BrnoCzech Republic

Telephone 420-543-124-000

Fax 420-543-124-001

Internet Address www.pkiteplotechna.cz


Booth Hall 13 D13





Fibre glass production lines

Production lines for fibre glass




Production lines for fibre glass

Fibre glass production lines consists of assemblies of UM type with thelength to width 3:1Used heating - natural gas - air

- O2 - natural gas- electro

P l a n s e e M e t a l l G m b H

Address 6600 ReutteAustria

Telephone +43 5672 600-2274

Fax +43 5672 600-512

Internet Address www.plansee.com


Booth Hall 13 F36








01.08.01 Glass wool technology

01.08.02 Rock wool technology


02.06.08 Sputtering targets for glass coatings



Glasschmelzelektroden aus Molybdän

Beim Schmelzen von Glas mittels elektrischer Energie sowie bei elektrischbetriebenen Boosting Systemen werden heute vorwiegend Elektroden ausMolybdän eingesetzt. Die pulvermetallurgisch hergestellten Mo-Elektrodenzeichnen sich aufgrund ihrer Reinheit und Verarbeitung durch guteFormbeständigkeit, hohe Korrrosionsbeständigkeit gegenübergeschmolzenem Glas sowie einer guten elektrischen und thermischenLeitfähigkeit aus.Beim Schmelzen von Glas mittels elektrischer Energie sowie bei elektrischEbenso schließen sie aufgrund ihrer Werkstoffreinheit eine Verfärbung derGlasschmelze sowie Blasenbildung aus.Beim Schmelzen von Glas mittels elektrischer Energie sowie bei elektrischDie patentierte Oxidations-schutzschicht SIBOR® für Molybdän-Glasschmelzelektroden vereinfacht den Einbau von insbesondere Boden-und Plattenelektroden.Beim Schmelzen von Glas mittels elektrischer Energie sowie bei elektrischMit der SIBOR®- Beschichtung werden die Molybdän-Glasschmelz-elektroden während des Antemperns des Ofens zuverlässigvor Oxidation geschützt.Beim Schmelzen von Glas mittels elektrischer Energie sowie bei elektrischVorteile:

spezielle Glasschmelzelektrodenqualität im Bezug auf Korrosions- undKriechbeständigkeitkürzeste Lieferzeiten ab Lager durchPLANSEE-EXPRESS für Standardelektroden mit abgestimmtenGewindeformenauf Wunsch Fertigung von kundenindividuellenGewindeformen (Paßstufen, konischen Gewinden, etc)SIBOR®-Beschichtung als Oxidationsschutzschicht für MolybdänNICROM-Beschichtung von Kühlwasserinnenbohrungen zum Schutz vorWasserdampfkorrosionauf Wunsch mit AusgaszertifikatAusführungen:Die Glasschmelzelektroden werden mit einer glatt geschmiedeten undchemisch gereinigten Oberfläche ausgeliefert. Auf Wunsch erhalten Sieauch Elektroden mit mechanisch bearbeiteten oder beschichtetenOberflächen




P n e u m o f o r e S . p . A .

Address Via N. Bruno, 3410090 RivoliItaly

Telephone +39 011.950.40.30

Fax +39 011.950.40.40

Internet Address www.pneumofore.com


Booth Hall 12 C51



02.11.06 Compressor




Suchwort eingeben:


Enter search key:


Enter search key:

P o d o l s k r e f r a c t o r i e s , J S C

Address 15A Plesheheyevskaya Str.142101 PodolskRussia

Telephone

Fax

Internet Address

EMail

Booth Hall 10 C27-1


01.02 Auxiliary and operating materials






Unshaped refractories

P u t s c h - M e n i c o n i S . p . A .

Address Via Irlanda, 153036 PoggibonsiItaly

Telephone 0039-0577-90320-0

Fax 0039-0577-9793-35

Internet Address www.putschmeniconi.com


Booth Hall 14 B09











04.01 Glazing tools


04.01.03 Tools and smelting equipment for glass makers



ELECTRIC PRESS EPM 350EPM 350/6 is a multi-station press with rotary table. The machine isequipped of a pressing system with electronic start that permits to definethe exact pressing features for each mould present on the table . Thepressing is made by a special manufactured ball screw. The stations on thetable are equipped with adjustable cooling systems, tree are temporised bysolenoid valves.The male has its own temporised cooling system.

TECHNICAL DETAILS:

Articles dimensions: mm 350 x 350 for enclosed mould, mm 200 x 350 forextendable mould.Moulds weight: 80 Kg.Positions on the table: 6 o 4.It canwork with: 2, 4, 3, 6 moulds.Table diameter: 1380 mm.Rotary table motorpower: 5,5 Kw controlled by an inverterSpeed table rotation:adjustable.Pressing features: 10 t.Pressing motor power: 4,4 Kw.Pressingrun: 500 mm.Advancement speed: 160 mm/s.Cooling Fun: 3 Kw.Pneumaticsystem: 6 BAR.Electric power requirement: 15 Kw.The machine can be equipped with a shear group for glass cutting and witha take out to extract the article by the mould and for the followingpositioning on a conveyor belt.

The shear group has 3 mechanic positions adjustment. The advancementof the cutting group and the cut are started by two pneumatic cylinders.Advancement cutting group: 400 mm.

The take-out has two movements horizontal and vertical.The horizontal one is realized by a no stem cylinder and a ball slide way.The vertical one is realized by a ball screw started by an electric motor withprogrammable position control.No stem cylinder horizontal run: 750 mm.Ball screw vertical run: adjustable.Take out vertical run power motor: 0,4 Kw.


AUTOMATIC SPINNING MACHINE CRA 2000




The CRA 2000 is a spinning machine with rotary table, withelectric/electronic drive of the latest generation. The main characteristic thatdistinguishes this machine from the existing ones available on the market isthe possibility of simultaneously manufacturing 2 items with differentshapes and dimension, up to a max. diameter and height of 100 mm.Obviously all the accessories of the machine, shears unit, take out and ringsupporting arms to cover the mould, are designed to carry out this function:they are automatically positioned according to the mould and the itemsbeing produced.

TECHNICAL DETAILS:

Electric power requirement: 25 Kw.Centrifugation motor: 13,2 Kw.Automaticcooling unit for moulds and items by means of cooling fan: 3 Kw.Nr.2 ringsupporting arms to cover the mould with automaticinsertion with controlledpreloading.Nr.1 take out (pliers or vacuum pump) with variable stroke andgrip.Nr.1 pneumatic motor-driven shears unit with automaticpositioning.Pneumatic system: 6 BAR.Vacuum pump: pneumatic.Selfcentring spindles: diameter 250mm.MACHINE DIMENSIONS:

Length: 3400 mm.Width: 2530 mm.Height: 3100 mm.Net weight: 3500 Kg.MACHINE CONTROL

Electric/electronic control cabinet, disjointed from the machine, equippedwith:

Modular PLC.Centrifugation digital frequency converter: 11 Kw.Digitalfrequency converter for table displacement: 5,5 Kw.Supervision softwarefor machine programming, by means of PC with Touch Screen technology.CONTROL CABINET DIMENSIONS:

Length: 1000 mm.Width: 600 mm.Height: 1800 mm.Net weight: 300 Kg.


HYDRAULIC INJECTION MACHINE PMP 2

Hydraulic-injection machine with two working station, suitable for themanufacturing of candle-holders, small animals ornaments, and highthickness articles.

TECHNICAL DETAILS:

Article dimension: min. Ø 10 mm., max Ø 150 mm. (approx.)Height: 300mm.Weight of glass: from 100 gr. to 2000 gr.Working speed: max. 4strokes for minute.Hydraulic power plant included in the machine: 4Kw.Hydraulic-piston injection system: stroke 200 mm.Max. injectionpressure : 1500 Kg. at 75 BAR of pressure.Max. injection speed: 200 mm.par second.Total electrical power installed : 4 Kw multi-tension 40/60Hz.Pad-holding hydraulic upper pistons with stroke adjustable forheight.Low-pressure circuit switching control for keeping the machinerunningafter injection.MACHINE DIMENSIONS:

Length: 2200 mm.Width: 1100 mmHeight: 2250 mm.Net weight: 900 Kg.

Q u a n t u m E n g i n e e r e d P r o d u c t s , I n c .

Address 438 Saxonburg Boulevard16056 Saxonburg, PAUSA

Telephone 0001-724-352-5100

Fax 0001-724-352-4443

Internet Address www.quantumforming.com


Booth Hall 13 D30-6





Quantum Forming SystemOnly Quantum's Forming System can provide glass makers with theulimate combination of hardware across all forming processes and we do itwith fewer system parts and on any IS machine.




The TWT Design Universal Cylinder Concept Unique Forming System TotalForming Analysis Maximum Return on Investment - ROl MaximumProduction Flexibility

R a m s e y P r o d u c t s C o r p o r a t i o n

Address 3701 Performance Road28214 Charlotte, NCUSA

Telephone 0001-704-394-0322

Fax 0001-704-394-9134

Internet Address www.ramseychain.com


Booth Hall 13 C04





Engineered Drive SystemsFor customers that prefer a complete solution Ramsey designs and buildschain drive transfer cases. These units are custom built to fit eachapplication so there is no minimum order quantiity. Also, because they arecustom built, shaft sizes, chain and sprocket selections, lubrication method,and enclosure materials can all be selected for the application. Dependingon customer preference, units can be partially assembled or fullyassembled and ready for installation. Typically units are shipped fullyassembled with a coat of gray primer applied.To inquire about a drive system simply contact Ramsey sales.A CASE STUDYApplication:Positive Displacement Blower Drives250 HP Motor as 1791 rpm.1.36:1 Drive RatioComponent Selected:Ramsey RPV612 ChainRamsey RPV sprockets

A major OEM supplying positive displacement blower packages to a utilitycompany selected Ramsey silent chain drive systems to couple the motorsto the blowers. Ramsey designed and built a finished package including acomplete drive system with chain, sprockets, enclosure, and lubricationsystem. The complete drive module was shipped to the OEM for assemblyinto their blower package before delivery to the customer. Ramsey workedclosely with the distributor sales team, the OEM, and the end user to makesure all requirements were satisfied.

R a p i d f l a m e L i m i t e d

Address Saddleworth RoadHX4 8NF GreetlandUnited Kingdom

Telephone 0044-1422-3112-44

Fax 0044-1422-3112-48

Internet Address www.rapidflame.com


Booth Hall 14 A15










02.01.05 Sawing machines and rim polishing machines

02.03.05 Polishing technology








Rapidflame burnersRapidflame burners are used safely with any fuel gas, with compressed airand oxygen. Burner flames are often used as a tool for glass forming,localised melting or surface polishing. Single port, multiple port, pre-mix orsurface mix burners can be custom designed for any glass productionapplication.

R a t h A G

Address Walfischgasse 141010 WienAustria

Telephone 0043-1-5134427-24

Fax 0043-1-5134427-87

Internet Address www.rath-group.com


Booth Hall 12 D11





Porrath/Alporit

Unsere Feuerleichtsteine Porrath und Alporit umfassen das kompletteSortiment für Anwendungen bis 1840°C.Die chemischen und physikalischen Eigenschaften unserer Steinerepräsentieren das internationale Spitzenniveau.Die Abstufung der chemischen Zusammensetzung sowie derKlassifikationstemperatur erlaubt für jeden Anwendungstemperaturbereichdie Auswahl des optimalen Produkts.Die Rohdichte ist so eingestellt, dass im Anwendungsbereich die minimaleWärmeleitfähigkeit erzielt wird.Einsatzgebiete:

Ofenanlagen für die keramische IndustrieTunnel-, Herdwagen- und HaubenöfenPorzellanindustriechemische undpetrochemische IndustrieGlasindustrieHinterisolierung von GlasschmelzwannenIsolierung im Bereich des Zinnbades beiFlachglasproduktionKraftwerksanlagenStahlindustrieHochöfenWinderhitzerKoksofenbatterienNE-MetallindustrieIsolierung von Anodentieföfen und KammerdeckelnZement- undKalkindustrieDie Vorteile sind:

hohe Festigkeitenhervorragende Heißeigenschaften wieDruckerweichen geringes Druckfliessen,guteTemperaturwechselbeständigkeit

Refractory SystemsSPIRATH (Spinell bricks)ESCORATH (Chromecontent bricks)KORRATH (Corundum bricks)ALURATH (Mullite bricks)ZIRRATH (Zirconsilicate bricks)CARATH (Castables, Moratars, Mixers)ALSITRA (Alumosilicate fibre materials)ALTRA (Fibre materials based on Alumina)PORRATH / ALPORIT (Insulating bricks)




R a u t e P r e c i s i o n O y

Address Ahjokatu 4 AFI-15801 LahtiFinland

Telephone 358-3-82921

Fax 358-3-82941-04

Internet Address www.lahtiprecision.com


Booth Hall 15 A48


01.03 Preparation of raw materials and batches













Batch Plants and Weighing SystemsLahti Precision's (formerly Raute Precision) two goals in the conception andrealisation of a batch plant are to achieve the highest consistent quality ofthe mixed batch going into the furnace and to ensure the long-termday-to-day operational reliability of the plant.

High quality glass is dependent on the accuracy of dosing of each rawmaterial and the adequate mixing of the materials including any colorantsor additives which may be required. By using high quality load cells,

weighing indicators, hopper scales and dosing devices, controlled andlinked up by a sophisticated rapid response control system, - all of ownmanufacture, - Lahti Precision can guarantee that a consistentlyhomogeneous mix will be available in the furnace charger.

Lahti Precision's plant engineering philosophy is to achieve simple materialflow, using gravity and as few changes of direction as feasible, with aminimum number of pieces of equipment. The objectives are high reliabilityand low maintenance costs. Lahti Precision applies the same principleswhether the batch plant or weighing system is for the production of float,hollow and fibre glass although the tolerances and hence the overall costmay be different according to the application.

Lahti Precision has always been particularly attentive to the conditionswithin the batch plant so as to provide a safe low-dust working environmentfor the operating and maintenance staffs and for the greater reliability of theplant.


Advanced Batch Information Management SystemBatch Information Management System - bims -

a key to better quality and higher productivity

the complete chain from the raw material supply to finished product has tobe controlled to achieve high quality and high yield in glass protection.Consequently, the new Batch Information management System of LahtiPrecision (formerly Raute Precision) has a central role in increasing thequality and productivity of glass manufacture.

BIMS allows you to manage your batch plant processes with greaterefficienxy

The batch Information Management System provides batch plant reporting,trending, pruduction tracking, condition monitoring and quality analysisinformation. In addition, the system includes plant-wide information ofrecipes and dosing parameters.

The BIMS provides a user-friendly web browser based analysis andreporting user interface for production information alarm and eventmonitoring and analysis, preventive maintenance support and productionefficiency monitoring. Most reports are graphs - histograms, colums, timescakes or pie charts. Each report enables filtering, sorting, grouping,different printing modes etc. The reports are interactive allowing an easychange between different views.

Batch reporting

Batch Reporting provides analysis and reporting facilities that collect, storeand display data from the production. This easily accessible information




facilitates process improvement, quality analysis, legislative compilanceinformation and decision support.

Alarm & event monitoring and analysis

The alarm & event tool helps to reduce dowmtime and associated costs. Itprovides support to maintenance functions, and has the ability to respondto changing conditions more quickly than before. For example, AlarmPareto Analysis reports focus on crucial alarms and problems.

Preventive Maintenance

Preventive maintenance is the combination of actions in a batch plant toprevent failures and detect failures in early stage. It includes conditionmonitoring reports to detect equipment failures, and has a tool to supportfailure prevention.

Production efficiency monitoring

By using the Batch Information Management System, the batch plantpersonnel can optimize the production process. Clear improvement can beachieved through the identification of weakness, and by reducingdowntimes.

The reports also help to improve quality, reduce production losses, andminimize maintenance related downtime and costs. The Batch InformationManagement System allows you to manage your batch plant process withgreater efficiency.



Enter search key:

R E F E L S . p . A .

Address Zona Industriale Ponte Rosso33078 S. Vito Al Tagliamento / PNItaly

Telephone 0039-0434-85345

Fax 0039-0434-85314

Internet Address www.rhi-ag.com


Booth Hall 12 B04





Melting Furnace for Flint GlassFor the lining of the glass contact area RHI Refractories offers solutionsthat ensure color impurities of the glass is impossible.

They include:

the entire direct glass contact area made of high-grade fused cast AZSmaterial by REFELthe throat in molybdenum-reinforced AZS bottomsafetylayers made of bricks and mixes in zirconia-mullite and zirconia-silicatebottomsupporting layers of sillimanite and fireclay bottom and side-wallinsulation made of large-format insulating bricks Supral 30/1.




R e k e r M a s c h i n e n f a b r i k , A d o l f

Address Mühlenbrinkweg 832791 Lage / LippeGermany

Telephone 0049-5232-9547-0

Fax +49-5232-9547-10

Internet Address www.reker.de


Booth Hall 12 D33





ProduktauswahlTransportelementeZentrierungen, AusrichtstationenWaagenEntstauberEtikettiererSchrumpffolien-EinzelblattauflegerSchrumpffolien-EinschlagmaschinenSchrumpfeinrichtungenDeckbrettauflegerUmreifungenSicherheitseinrichtungenSteuerungen

R e s c a l S . A .

Address 200, avenue de la Couronne des Pres78681 Epone CedexFrance

Telephone 0033-1-30904485

Fax 0033-1-30900211

Internet Address www.rescal.fr


Booth Hall 13 D53



02.02 Drilling technology




Heating frameHeating frame for ventilated furnace:




R H I G l a s G m b H

Address Abraham Lincoln Straße 165189 WiesbadenGermany

Telephone 0049-611-2365-12

Fax +49-611-2365-535

Internet Address www.rhi-ag.com


Booth Hall 12 B04





Schmelzgegossene ProdukteDie REFEL-Sortennamen stehen für hochwertige, erstklassige FeuerfestProdukte und für eine kundenorientierte Dienstleistung seit Bestehen derGesellschaft.

Heute ist REFEL ein integrierter Bestandteil der Gruppe RHI Refractories,in der jetzt alle Aktivitäten für die Glasindustrie in der weltweit operierendenRHI Gruppe konzentriert sind. REFEL wurde 1986 gegründet und 1993 indie Didier Gruppe eingegliedert. Im Jahre 1995 übernahm die RHI Gruppedie Didier-Werke AG.

REFEL mit Sitz in San Vito al Tagliamento, Italien, produziertausschließlich schmelzgegossene AZS-Produkte für die Glasindustrie mitFokussierung auf technisch hochwertige Materialien, die die Erfordernissedes Marktes erfüllen. Diese sind insbesondere das Erzielen längererOfenreisen, verbesserter Ofenleistung bzw. -auslastung bei erhöhterGlasqualität. REFEL ist sehr erfolgreich bei der Fertigung von Feuerfest-Materialien mit komplexer Geometrie, die für die Herstellung vonSonderglas oft benötigt werden.

RHI Refractories und damit REFEL S.p.A. werden sich weiterhin sorgfältigder Fertigung von spezieller und kundenorientierter Feuerfest -Produkte fürSchmelzöfen und Nebenanlagen in der Glasindustrie widmen.

Die anerkannte Qualität der Produkte und Dienstleistungen von RHIRefractories stützt sich auf sorgfältig ausgesuchte und geprüfteRohmaterialien. Die Fertigungsanlagen arbeiten mit Stand der Technik.Dazu kommen die praxisorientierte Forschung und Entwicklung in deneigenen Laboratorien in San Vito al Tagliamento, Italien, und Leoben,Österreich. Der Erfolg beruht auch auf die langjährige Erfahrung derMitarbeiter im Verkauf, Marketing und Forschungsabteilungen. Folglichsieht sich RHI Refractories nicht nur als zuverlässiger Lieferant vonhochwertigen Feuerfest-Materialien sondern auch als Partner derGlasindustrie.

R u r e x - S t a h l , D r . O t t o K u k l a G m b H

Address Steinhof 3740699 ErkrathGermany

Telephone 0049-211-243014

Fax +49-211-243400

Internet Address www.rurex.de


Booth Hall 13 E05







High developped forming machines




Forming machines for special figured, wired, profile, solar and crystalliteglass.


Wired glass crusherSpecial wired glass crusher for all kind of reinforced glasses

S . I . G . M A . S . r . l . , R e f r a t t a r i T e c n i c i I n d u s t r i a l i

Address Via delle Grigne, 12/A22070 Locate Varesino / COItaly

Telephone 0039-0331-823195

Fax 0039-0331-823198

Internet Address www.sigmaref.it


Booth Hall 12 D58





Furnace Refractories

S a a t i S . p . A .

Address Via Milano, 1422070 Appiano Gentile (Co)Italy

Telephone 0039-031-97-11

Fax 0039-031-933-392

Internet Address www.saati.com


Booth Hall 12 B59





02.03.08.02 Screen washing machine

02.03.08.03 Plants for screen de-laminating


02.11.08 Chemicals

02.11.08.07 Other chemicals







Enter search key:

S a i n t - G o b a i n S E F P R O

Address B.P. 2584131 Le PontetFrance

Telephone 0033-490-39-9999

Fax 0033-490-39-9899

Internet Address www.sefpro.com

EMail

Booth Hall 13 A63







ab Alumina JARGAL M

The typical glass contact materials for the end zones of furnaces(working-end, feeder channels) when glass quality is the priority : TV Glass,high quality container glass, float glass.

b Alumina JARGAL H IMPIts neutrality against soda vapors makes it the best choice for thedownstream part of superstructures in demanding applications.


Sintered MulliteIn the range of Sillimanite and Mullite basis products,Saint-Gobain SEFPRO present a complete line dedicated to the GlassIndustry, with leading products such as ARKAL 65V and forehearthsmonolithic roof blocks, or BP Mullite for high temperature and high spans(up to 9 meters) reinforcement glass fiber furnace crowns.



Enter search key:




S a v e S . r . l .

Address Via Abetone Brennero Nord, 13OstigliaItaly

Telephone 0039-0386-802093

Fax 0039-0386-32555

Internet Address www.savesrl.com


Booth Hall 14 A65





A product without comparisonSAVE has reached a great standard of experience in the field of hollowglass and produces series of moulds for all the automatic productivephases, using high quality material that is guaranteed by the certificate oforigin and analysis. We use the most advanced processing technologiesand avantgarde machinery: CNC centres for milling (3,4,5 axes), CNClathes, electroerosion CNC centres and CAD/CAM 2D and 3Dprogramming stations equipped with the most updated and powerfulsoftware.

The above in order to always meet our Clients' demands adequately interms of high quality workmanship and delivery schedules. SAVE weldssurfacing, metallizes powder, and performs TIG, PTA and related thermaltreatment. Besides SAVE offers its Clients a customer assistance serviceduring the production in the glass factory and can also offer the ordinaryand extraordinary repairs of series of moulds already used in the machine.

We believe that, in an increasingly competitive market, service and skillsare the essential factors that can make the difference - this is why we offerour Technical Department's potential to support the client both when wemake the product according to his specifications and when we are called toentirely design both the item and the mould.

S a x o n i a E d e l m e t a l l e G m b H

Address Erzstraße 509633 HalsbrückeGermany

Telephone 0049-3731-782-0

Fax +49-3731-782-430

Internet Address www.saxonia.de


Booth Hall 12 E58




01.06.04 Bar feeder

02.06.08 Sputtering targets for glass coatings



Laboratory equipmentMoulds and crucibles in various designs and volumes made from Pt99.9,PtRh10, PtAu5 and DVS PtRh10


BushingsBushings made by SAXONIA produce E glass fibers and C glass fibers insingle-stage and two-stage processes world-wide. Use of materials:PtRh20, PtRH10, DVS-PtRh10.

Number of nozzles: 800-4000

Nozzle geometry: tapered or cylindrical

Bottom plate production: pressed or TIG welded

01.06.04 Bar feeder

Equipment for glass melting




Production is carried out to customer specification for tableware,automobile glass, optical glass, LCD-glass.

Engineering

S c h r a d e r G l a s f o r m e n b a u G m b H & C o . K G

Address Rehwinkel 2-632457 Porta WestfalicaGermany

Telephone 0049-5731-7606-0

Fax +49-5731-7606-30

Internet Address www.schrader-gfb.de


Booth Hall 14 A61






Tibotherm

Pegel für PB, PBW, NNPB

-Borierte Oberfläche und Materialbeschaffenheit als Gebrauchsmusternational undinternational geschützt

(nat.Nr.639883/inter.Nr.2091276)

- Oberflächenhärte 1900 Vickers

- Grundhärte 60 HRC

- Maßgenauigkeit innerhalb 0,02mm

- Universell einsetzbar bei Enghals- und Weithalsgefäßen undEPB-Verfahren

- Hohe Wirtschaftlichkeit

- Preiswerter als jeder andere Pegel

S c h u n k K o h l e n s t o f f t e c h n i k G m b H

Address Rodheimer Straße 5935452 HeuchelheimGermany

Telephone 0049-641-608-0

Fax +49-641-608-1223

Internet Address www.schunk-group.com


Booth Hall 14 E09











Hot Glass HandlingHot Glass HandlingDuring the production process of glass, wherever hot glass is handled, itcomes into contact with components made of other materials. Theoperational reliability and the properties of these materials are decisive foran efficient and trouble-free production as well as for an excellent finish onthe glass products.This is why we manufacture such components out of carbon. Like no othermaterial, carbon is suited for the applications in the glass industry, due toits unique properties.- Carbon prevents surface checking in the glass because of its significantlylower thermal conductivity, compared to that of metals.- Carbon does not leave any discoloration on the glass parts, due to itsexcellent chemical resistance.- Carbon allows for long ligetimes of the handling components as a result ofits outstanding resistance to high temperatures and oxidation.For parts exposed to extremely high mechanical loads, Schunk Materialsoffers carbon fiber-reinforced materials.

S e b i n o A r t e S . r . l .

Address Via Kennedy, 24/b24060 Villongo / BGItaly

Telephone 0039-035-9263-01

Fax 0039-035-9263-02

Internet Address www.sebinoarte.it


Booth Hall 9 D59





Moulds for glassMoulds from refractory material flat sqare wave several sizes

Moulds from refractory material flat narrow oval several sizes

Moulds from refractory material vase several sizes

S e m i l u k i R e f r a c t o r y P l a n t , J S C

Address 5a Lenin Str.396901 Semiluki, Voronezh Reg.Russia

Telephone 0007-47372-93205

Fax 0007-47372-24619

Internet Address www.semiluki.ru


Booth Hall 10 C27-1








Low cement vibrocastables

Low cement vibrocastablesFeeder tubes, stirrers, plungers

Feeder spouts, burner blocks

S G C C

Address 105, rue du Fossé Blanc92230 GennevilliersFrance

Telephone 0033-146-138434

Fax 0033-147-946560

Internet Address www.sgcc.com


Booth Hall 13 C77




03.11.01.01.07 Machinery/tools








05.01.03 Measuring devices to be used on site

05.02.04 Controls for glass inspection machines





The VOLUMACThe VOLUMAC is an automatic machine that measures the capacity andthe weight of a glass containers, on a sample basis.

The major advantages of such system are :

Automatic adjustments for bottle height and diameterWorks in masked timeor in self service modethe speed of control : between 300 to 400 conatinerper shiftAutomatic correctioon for changes in the specific gravity of water asa funtion of temperaturesatisfies the requirements of Directive 75/107/CEEconcerning the coordination of the member countries legislation governingbottles used as measuring containerscan be integrated in a samplingmeasuremnt linecan be connected to any production Management systemCharacteristicsAll types of containers : Round and Non round

Ranges of containers :height : 120 to 380 mmdiameter : 50 to 110mmring diameter : 52 mm maxMeasurement time : Around 60 seconds per container

Precision : +/- 0,5 mm on the filling level




S i e b e n l i s t G l a s C r e a t i v - W e r k s t a t t

Address Willicher Straße 20a47918 TönisvorstGermany

Telephone 0049-2151-7946-37

Fax +49-2151-7919-83

Internet Address www.siebenlistglas.de


Booth Hall 9 D52





High-Speed Elektro-Fusing-Ofen

S i m t e c h S . p . r . l .

Address Rue de la Grande Couture, 147503 FroyennesBelgium

Telephone 0032-69-889670

Fax 0032-69-889677

Internet Address www.simtech.be


Booth Hall 13 C56












Defense and civil defenseSIMTECH offers a range of flexible tanks designed for the storage ortransport of hydrocarbons or water : the Flexdrums®. Those are meetingcurrent norms requirements (MIL, DCSEA).

This kind of tanks are widely called "Sealdrums".

For further references of flexible tanks for the storage or transport of fuel,water or industrial liquids we invite you to visit our partner website :Musthane.


Defense and civil defense




SIMTECH offers a range of flexible tanks designed for the storage ortransport of hydrocarbons or water : the Flexdrums®. Those are meetingcurrent norms requirements (MIL, DCSEA).

This kind of tanks are widely called "Sealdrums".

For further references of flexible tanks for the storage or transport of fuel,water or industrial liquids we invite you to visit our partner website :Musthane.

S k l á r n y K a v a l i e r , a . s .

Address Sklárská 359285 96 SázavaCzech Republic

Telephone 420-317-830-212

Fax 420-317-830-299

Internet Address www.kavalier.cz


Booth Hall 13 F23






Glass burner type H1, H1-S

The Glass burner H1, H1-S is intended for works in manual or mechanicalglass processing in glass-blowing workshops. It is designed for combustionof natural gas or propane-butane with air and oxygen. The burner H1-S canbe used in combination with the media saver type S-1 which is not anaccessory to the burner but can be supplied on the customer's wish.

The Glass burner consists of the body which includes valves and gasdistribution. The valves for controlling flame of the central jet are fitted onthe upper part of the body. On the right-hand part there is the gas valvewith a valve for make-up air. On the left-hand part there is the valve forcontrolling oxygen inflow. The inlets of gas, oxygen and air are in the lowerpart of the body. The burner head is fitted with a cover which serves as aprotection against burns. The burner can be turned by means of anarresting screw located in the base and its inclination can be set by meansof an arresting nut. The burner can be fixed with two bolts to the workingtable. The bolts are not included in the delivery.

Polishing burner type LH05 LH20These burners are intended for operations at refining premises, for instancefor polishing and flaring of traces of mold separating surfaces. The burnersmay also be used to heat up products during transport to anotherproduction operation or to relieve internal strain in the products. Theburners use rock gas or propane-butane together with oxygen. Specialburners have burning media conducted separately up to the head of theburner. Such solution allows large range of flame regulation while keepingvery good stability. These burners may be successfully used for lead glassflaring without causing undesirable reduction of glass on the surface of theproduct. The burners are designed in a circular fashion with flame diameter5 mm to 50 mm and it is possible to produce water-cooled burners ifrequired, or flat burners with flame dimensions 4.5 to 16.5 x 51 to 150 mm,and flare burners up to 400 mm.

Rock gas and air burner




Air burners for glass flaring are intended for polishing of soft glass or forpreheating and cooling of products. The air burners have flame stabilizationallowing a large range of flame adjustments without the risk of flametear-off. The burners are produced for flame width up to 18mm and lengthup to 400 mm.

Split burner type PH2To separate glass semifinished products we produce burners type PH-1and PH-2 for a mix of rock gas or propane-butane and burning air.

Burner PH-1 is used with an integrated mixer equipped with its own controlvalves. PH-2 burner needs a separate front mixer.. The burners have avery efficient flame stabilization. The individual flames are needle-shaped,therefore no undesirable collateral heating in the direction away from theseparation plane takes place. If requested we also produce special oxygenburners suitable for separation of glass tubes.

S k l o f o r m s . s .

Address Nova Ves nad Luznici 1387 09 Nova Ves nad LuzniciCzech Republic

Telephone 420-384-795-938

Fax 420-384-795-910

Internet Address www.skloform.cz


Booth Hall 13 D88





FoundryThe foundry is equipped with middle-frequency furnaces for cast iron andwith two furnaces for melting of non-ferrous metals. The laboratory checksthe melted materials and castings using a Baird spectrophotometer. Thecastings are soft-annealed in three annealing furnaces. The capacity of thefoundry is 100 t monthly with the capability, if necessary, to increase this by30%.

MetallizingWe carry out the metallizing of moulds in plasma CNC automatic machinesin which the temperature reaches as much as 22, 000° C. These machineswere designed especially for metallizing of the moulds and their continueduse is a guarantee of the highest standard metallizing that will outlast thelife of the moulds. Over 98% of glass moulds are now metallized usingCNC plasma compared with hand metallizing.

S k l o s t r o j T u r n o v C Z s . r . o .

Address Preperska 210511 01 TurnovCzech Republic

Telephone 0042-481-350-111

Fax 0042-481-350-222

Internet Address www.sklostroj.cz


Booth Hall 13 B75








AL 1xx-2-2Description of the machine AL 1xx-2-2Individual electronically driven section machine with moulds centre distance127 or 140 mm that can work in both SG and DG mode. The machine canbe used in following modes: Blow & Blow (BB) mode and Press & Blow(PB) mode with the possibility to use Narrow neck PB(NNPB) mode andwith the possibility to use vacuum in both blank and blow mould. Incomparison to AL 11x-2-1, AL 11xx-2-2 has more powerful mould closingmechanism.

The machine can be assembled with: mechanical-cam gob distributor orwith electronically driven gob distributor; with inverts' cylinder and take-outmechanism in hydraulic damping modification in side positions or inelectrical-modification with servo drives; and with mechanically orelectronically driven pushers.The machine is equipped with quick change plunger mechanism, quickchange take-out tongs and with equipment for both axial and radial coolingof the blank and blow moulds.

The machine can be equipped with equipment for quick change betweenDG and SG production mode.

With the electronically driven gob distributor and with the electronicpushers, the machine can work with arbitrary number of sections.

Optional equipment includes wide dimensional range of components forwide scale of products and many jigs for control, adjusting andmaintenance

AL-I.S MachineAL - I.S. MachineIndividual section forming machine for glass containers AL 1xx-2-2 isdesigned for automatic medium and mass manufacture of glass containers(bottles and jars). The machine can be used in following modes: Blow &Blow (BB) mode with or without vacuum in blank mould as well as in blowmould; Press & Blow (P-B) mode with or without vacuum in blow mould;Narrow neck PB(NNPB) mode with or without vacuum in blow mould.Except standard radial cooling of the moulds the machine could bemodified to use axial cooling of both blank moulds and blow moulds, ifappropriate moulds are installed.

The I.S. machine has to be used with suitable equipment, which match toits capacity. The productivity of both machine and line depends on state ofsubsidiary equipment, on quality and constancy of supply of raw materials,

mediums and energy as well as on parameters and stability of the workingenvironment. Only full fulfillment of all conditions of installation and ofoperation can be the right way how to achieve expected production of bothmachine and whole line.

The machine has to be located under the gob feeder of suitableparameters. Production parameters of the feeder and its foreheart areprimarily done by the products parameters and specifications. From thisproducts parameters results the main production parameter of the foreheart(tons per day). The first condition for successful installation and operation isprofessional design of the whole line - from the batch house to thewrapping line and transport of the products

Forehearths&FeederDS - Gob Feeder

Gob feeder is a part of automatic container glass production line and isdesigned to regulate temperature of molten glass and its dosing in gobs.The feeder is designed for middle- and high-capacity production ofcontainer glass.

Homogenous conditioning and fixed delivery of the molten glass is securedby the molten glass channel. The channel is dimensioned accordingly tothe requirement of the molten glass capacity in tons

In specific range, the operator is able to influent the technology of the gobbecause of the electronic control of servo drives of the feeder mechanisms.The servo drive feeder mechanism allows to affect the motion of the shearsand of the plunger.

Hydraulic press CDC 2-9Hydraulic press CDC 2-9The CDC 2-9 hydraulic press is a high - speed table press designed forsmall production and mounting work. It is especially suited to batchproduction quantity and line production, for a range of work on small tomedium sized products. It is possible to use it at pressing, straightening,bending, cutting, drawing and stretching, riveting, stamping, etc.

The pressure is fully adjustable up to its maximum limit.The press isconstructed for fixed installation at a location protected from weather (environment classification 3K3/3Z1/3B1/3C2/3S2/3M3 acc. Czech standardEN 60721-3-3 - classification of environment conditions ).

Electrical installation must provide protection against electric shocks.Appropriate Czech standard 33 2000-4-1-41 ( equivalent ES 602 04-1 332200 ). If continuous use of the press on one or more shifts is planned, orthe case oil temperature rises above 55 °C, then the press should be




equipped with cool

S M T L a g e r - u n d T r a n s p o r t s y s t e m e G m b H

Address Syker Straße 205-21327321 ThedinghausenGermany

Telephone 0049-4204-174795

Fax 0049-4204-174797

Internet Address www.smtlog.de


Booth Hall 12 D21





GTG-A und FTG-LTausendfach bewährtUnsere Glas-Transportgestelle in A-Form oder unsereFenstertransportgestelle in L-Formhaben ihren vielfältigen Einsatzund sorgen für sicheren Transport mit hoher Ladekapazität!

KOMPAKTSAFEDas kompakte Schubfachlager in Schweisskonstruktion. Anlieferung infertig montierter Ausführung.

Link zu weiterer Informationhttp://www.smtlog.de

Lager- und TransportsystemeBetriebliche Ausrüstung für Lager und Produktion nach Vorgaben undKonstruktionswünschen des Kunden.


LAGERWAGENLager- und Transportwagen in Ausführung nach Kundenwunsch. Ideal fürLager- und Produktionsorganisation.


MOBISAFEFächerwagen zum Lagern, Transportieren und Sortieren. Ideal fürAnwendungen von der Produktpräsentation bis zur Organisation desZuschnittprozesses.


PALETTENGESTELLE




Die super preiswerte Lösung für Lagerung und Transport von hauptsächlichSerienprodukten. Lieferbar in vier verschiedenen Ausführungen.


Schubfachlager MaxisafeSchubfachlager mit Rahmenbauwerk für Glassmaße bis 2550x3210.Optionen Schwerlastbühne, Treppe und Geländer realisierbar.Abmessungen und Ausführungen 100% nach Kundenwunsch machbar.Keine Festlegung auf starre Moduleinheiten.


VARIOSAFEDie kleine Produktfamilie der Schubfachlager. Mit wenig Aufwandtransportiert und in Eigenleistung montiert. Ideal für kleine und mittlereGlasmaße und jegliches Plattenmaterial.


S o f t w a r e & T e c h n o l o g i e G l a s G m b H

Address Bahnhofstraße 7603051 Cottbus-KiekebuschGermany

Telephone 0049-355-59020-0

Fax +49-355-541124

Internet Address www.stg-cottbus.de


Booth Hall 15 C07





05.01.02.02 Measurement, control and inspection of gas compounds





Natural Gas and Heavy Oil burners- Oxygen probes and Lambda control- DeNOx Natural Gas and Heavy Oil burners- Optical Melting Control- Technology for optimisation of combustion air distribution (Air CurtainSystem)


DeNOx Natural Gas and Heavy Oil burners




Specialist for Heat technology, Sensors, Process control and processoptimisation for industrial furnaces

S t a r s h i n e G m b H & C o K G

Address Werner-Von-Siemens-Straße 2894447 PlattlingGermany

Telephone 0043 6648 494 530

Fax 0043 662 642635

Internet Address www.starshine.at


Booth Hall 10 A65



03.01.12 Decorative colored glass

03.01.15 Cross out glass for melting/ Fusing glass

03.02.02 Laminated glass

03.09.03.06 Curtain wall elements (general)

03.11.02.01 Glass façade elements

S t e i n H e u r t e y

Address Evry CedexFrance

Telephone 0033-1-60911234

Fax 0033-1-60776755

Internet Address www.stein-heurtey.com


Booth Hall 13 C71












Enter search key:





Enter search key:


Enter search key:

S t e k l o p a c k

Address 69 Moskovskaya Str.302030 OryolRussia

Telephone 0007-4862-543-544

Fax 0007-4862-552-564

Internet Address www.steklopack.ru


Booth Hall 10 C27-1





ACCUMULATION TABLES AND PALLET CONVEYERSare used for automatic distribution of glass containers into the straight rowsand for conveying of the loading units to the covering, shrinking andstorage positions.

S t e w a r t E n g i n e e r s

Address 27560 Cahill Road48134 Flat Rock, MichiganUSA

Telephone 0001-734-783-1003

Fax 0001-734-783-1004

Internet Address www.stewartengineers.com


Booth Hall 13 C17-1






02.06.06 UV-Absorption - Coating (pyrolytic)








Float Glass TechnologyAcuraCoat pyrolytic coating technologyUltra thin glass forming - 0.55mmThick glass forming - 19 mmAutomatic temperature profiling - Hands offoperationAutomatic tweel - Hands off operationFloat bath proprietarymodelsAtmosphere system sizingComputer generated batch formulasThreedimensional float bath model developed in CADTop roll machine speed andangle modelGraphite liner innovationBottom cooling systeminnovationSuperior refractory spacingRobust atmosphere system withsuperior distributionModular components with simple installationFloat bathlaser thickness gaugeTop roll side seal innovationDocumentation, detailedmanuals




Enter search key:

S T R A D A S . r . l .

Address Via Ada Negri, 1220081 AbbiategrassoItaly

Telephone 0039-02-949669-77

Fax 0039-02-949693-51

Internet Address


Booth Hall 14 D50





Eine Auswahl

S t u d i o 1 S . r . l . , A u t o m a z i o n i I n d u s t r i a l i

Address Via Radici in Monte, 1542010 RotegliaItaly

Telephone 0039-0536-851243

Fax 0039-0536-851761

Internet Address www.studio1srl.it


Booth Hall 15 G74















Enter search key:


Enter search key:

S u p e r t r u c k s L t d

Address Beaufort StreetWA9 3BQ St. Helens, MerseysideUnited Kingdom

Telephone 0044-1744-25348

Fax 0044-1744-27772

Internet Address www.supertrucks-uk.com


Booth Hall 10 E60





VansEXTERNAL RACK SYSTEM

Vans up to 7.5 tonnes can be fitted with External and Internal glass carryingsystems.

External racks are constructed from patented mill finish aluminiumextrusions and rubber profiles.

Supplied complete with System 1 Securing Poles, Front and Rear SafetyMarkers and Wheel Access Panel as standard.

Optional Extras

System 2 Securing Poles

Multistraps for securing windows/doors

Telescopic Rack(s)

Roof Rack

Roof rack Safety Walkway

Rear Door Ladder

Folding Ledge

Facia Panel for company logo

Cutting Table

Grey rubber profiles

Detachable Brackets

Gutter Clamp fixing (no drilling to side of van)

Storpedo tube storage for roof rack

Ladder Locks

Optional Finishes




Anodised

Powder Coated

INTERNAL RACK SYSTEM

Internal racks are constructed from welded lightweight aluminium withfelted timber battens.

Standard interiors come complete with 6 tie on securing poles, partbulkhead, plywood floor overlay and shelves behind racks.

Optional Extras

Full height Bulkhead (with or without window)

Carpet overlay to floor

Multistraps for securing windows

Module Storage Systems

S V A I n d u s t r i e - F e r n s e h - G m b H

Address Marie-Curie-Straße 1140721 HildenGermany

Telephone 0049-2103-335500

Fax +49-2103-335501

Internet Address www.sva-hilden.de


Booth Hall 15 C16




03.13.04 Video monitoring systems







A U S F A H R V O R R I C H T U N GAusfahrvorrichtung universell einsetzbarNeigung horizontal und vertikal verstellbarWassergekühlte Zylinderaufnahmeplatte gewährleistet eine hohe Standzeitdes ZylindersAufteilung der Vorrichtung in verschiedene Komponenten erleichtertMontage und Service

S y s t e m R e s

Address 1009 Chemin Vert59670 WinnezeeleFrance

Telephone 0033-328-43-3950

Fax 0033-328-43-3893

Internet Address www.systemres.fr


Booth Hall 13 B37









Foam BeltsOur foam belts can be used in all types of bottles inspection machines.

Link zu weiterer Informationhttp://www.systemres.fr

Roller bearings



Enter search key:

T e c o g l a s L t d .

Address 60 Savile Street EastS4 7UQ SheffieldUnited Kingdom

Telephone 0044-114-2759020

Fax 0044-114-2700875

Internet Address www.tecoglas.com


Booth Hall 13 A23
















electric Melt Furnaces




TECO has designed and built over 150 electric melt furnaces over the last50 years. TECO, along with affiliates KTGSI and Tecoglas, Ltd., specializein the design, project management and installation of electric melt furnacesfor melting soda lime, sodium borate and lead glasses for the container,tableware, insulation wool fiber glass and crystal glass industries. Thephotograph is a typical cold top electric melter.

The electric melt furnace, for all intent and purposes, is an emission freemethod of melting glass and eliminates the capital and operating cost of anemission control system.

The capacity range on electric melters when melting soda lime and sodiumborate glasses ranges from a few tons to way up to 300 TPD.

TECO provides cold top and hot top electric melt furnaces to suit processneeds. The electrodes are bottom, side or top entry, or a combinationdepending on design requirements or customer preference. Special powersystem frequencies, 10 to 1,000 hertz, are utilized to enhance processperformance. Resistivity testing and furnace modeling are part of everyelectric melt application.


TECO Oxy-Fuel FurnacesOxy-Fuel

Oxy-fuel is applied to glass melting furnaces for a variety of reasons, someof which are:

Increased Production

Oxy-fuel can be used to increase glass melting capacity for a given meltingarea. Also, when regenerators or a recuperator deteriorate, oxy-fuel can beapplied, in part or in total, to maintain the production level desired.

Reduced Emissions

NOx emissions are reduced substantially with a complete oxy-fuelconversion.

Improved Efficiency

Whenever oxy-fuel melting is utilized, it will generally provide animprovement in fuel efficiency when compared with traditional air-fuelmelting. other energy savings are obtained with elimination of thecombustion air fan and reduction of hot fan engergy requirements. Theenergy savings partially offsets the cost of oxygen.

Increased Furnace Life

Oxy-fuel eliminates the regenerators or recuperator, which can be theoverridingfactor that determines life of an air-fuel furnace. With oxy-fuel, lifeis determined by the melter itself, usually resulting in a longer campaign.

Improved Glass Quality

with a properly designed oxy-fuel furnace, galss quality will be improvedcompared to air-fuel melting. An additional benefit is the steady stateoperation when compared to regenerative melters.

Simplified Operation

With no regenerators or recuperator, the furnace and maintenance aresimplified.

T E C R E F S . r . l .

Address Via Como, 2722069 Rovellasca / GOItaly

Telephone 0039-02-96749013

Fax 0039-02-96749294

Internet Address www.tecref.it


Booth Hall 12 C58





For the FOREHEARTH-Vibro-cast channel blocks for glass contact and insulation

-Vibro-cast superstructure blocks and insulation

-Combustion heating and cooling systems

-Control equipments

-Steel casings




T E K A M a s c h i n e n b a u G m b H

Address In den Seewiesen 267480 EdenkobenGermany

Telephone 0049-6323-809-0

Fax +49-6323-809-10

Internet Address www.teka.de


Booth Hall 15 F74





TEKA TURBINE PAN-TYPE MIXERS Glass Batch PreparationTEKA turbine pan-type mixers THZ are pan mixers for batching

operations, and are available in sizes from 250 to 6000 liter filling

capacities.

The mixing pan floor and the outer walls are protected by

exchangeable wear liners made of A.R. steel plate.

The spring-loaded mixing arms are mounted in the rotor head, and areadjustable to compensate for wear.

This, plus their various angles-of-attack enhance the mix-effect,

reduce wear, and protect the drive from shock.

Depending on the application, mixing paddles, wall scrapers, and mixingarm wear guards made of various abrasion-resistant materials

are available.

The turbine pan-type mixers THZ 250 employs permanently

lubricated, flanged gear motors for drive and discharge functions.

The centrally located planetary gearbox is driven by a 3-phase TEFCmotor, which is flange-mounted directly to the gearbox, in the case of

turbine pan-type mixers THZ 375 to THZ 1125 mixers,

and connected by a double

universal-joint driveshaft on turbine pan-type mixers THZ 1500 to

THZ 6000 models.

A hydraulic turbo-coupling for soft starts under load is available also.

Flanged to the gearbox, and driven by it, is a hydraulic gear pump whichconstantly cycles the oil, and supplies the pressure to operate the

discharge gate(s).

The discharge gate assembly, used to remove the batch from the mixer, isa complete component bolted to the mixer pan floor.

The semi-circular gate is hydraulically operated by means of a rotating

piston cylinder. It is electrically controlled, and can be opened to anydegree desired.

Locating the pivot-point of the gate slightly inside the pan circumference

allows for a large opening and, thereby, a fast discharge.

As an option, the discharge gate can be opened, independent of the mixermain drive, via a separate hydraulic aggregate.

Mixers THZ 375 to THZ 1125 may be equipped with up to 4 gates,

whereas 3 gates is the maximum for THZ 1125 G to THZ 6000.

Sampling gates are available.

A protective cover encloses the mixer on top. A built-in seal makes itnear-dustproof.

Large, hinged segments with variable positioning are possible,

raised and lowered by a manual- or motorized cable winch.

On request we can supply steam injection through rotating lances.

Link zu weiterer Informationhttp://www.teka.de




T h i m o n

Address Savoie Hexapole - rue Louis ArmandMeryFrance

Telephone 0033-4-79610044

Fax 0033-4-79617100

Internet Address www.thimon.com


Booth Hall 13 C82






TOP-GLASSThe TOP-GLASS is an extra protection, essential for a long time outsidestorage with very hard climatic conditions.The TOP-GLASS sytem lays and shrinks a film sheet on the top of the load.Then it allows :- To avoid infiltration risks- To get a UV rays and mechanical aggressions strenght packaging, duringpallets stacking.



Enter search key:

T o l e d o E n g i n e e r i n g C o . I n c . ( T e c o )

Address 3400 Excecutive Parkway, P.O. Box29 2743606-0927 Toledo, OhioUSA

Telephone 0001-419-537-9711

Fax 0001-419-537-1369

Internet Address www.teco.com


Booth Hall 13 A23







01.03.08 Raw material technology and prewarming cullet technology















01.04.10 Filter techniques

01.04.11 Processing of water cooling for cullet treatment







Electric BoostThe TECO Group designs and constructs electric boost systems to meetthe clients' requirements for melting capacity, emissions reduction and/orglass quality improvement. TECO can provide a wide range of boostsystems, such as:

Single, two or three phaseBottom, side wall or top entry electrodesystemsWide range of frequenciesElectrodes installed at hot spot or underblanket typeInstalled with original furnace, at rebuild of a furnace or while inoperationElectrodes made of molybdenum, tin oxide or other typedepending on type of glassComplete line of bottom, side wall and top entryelectrodes


Float Glass PlantIsometric of a typical side port glass furnace:

T o r g a u e r M a s c h i n e n b a u G m b H

Address Repitzer Weg 104860 TorgauGermany

Telephone 0049-3421-7205-0

Fax +49-3421-7205-40

Internet Address www.tmb-torgauermaschinenbau.de


Booth Hall 15 F07









01.13.05 Warehouse technology






02.03.01.02 Grinding techniques for patterned glass


02.08.04 Machinery for the delamination of (glass) edges


02.09.02.03 Laminated glass technology with adhesives, casting resin and laminate








Suchwort eingeben:


Suchwort eingeben:


Enter search key:

U A S M e s s t e c h n i k G m b H

Address Prof.-Hermann-Staudinger-Straße 494234 ViechtachGermany

Telephone 0049-9942-9486-0

Fax +49-9942-9486-10

Internet Address www.uas.de


Booth Hall 15 B13











Low-NOx SystemtechnologieErste NOx- Regelung unter Berücksichtigung des CO-Wertes- NOx-Reduzierung um 10 bis 18- Stabile Fahrweise der Glaswanne- Glätten von CO-Spitzen- Keine Überhitzung von Kammern- Energieeinsparung- Ausgleich des O2 Gehaltes in der Verbrennungsluft über den gesamtenTag- TA Luft EignungsgeprüftDie Firma UAS Messtechnik GmbH hat ein neues System zur primärenNOx-Reduzierung unter Berücksichtigung des CO-Gehaltes erfolgreichentwickelt und eingesetzt.




- Mit dem System konnte der Luftüberschussfaktor weiter als bisherabgesenkt werden, woraus eine Energieeinsparung folgt- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Die täglichen Korrekturen der Verhältnisregelung, die durchBetriebsoptimierung auch bei modernster MSR-Technik üblich undnotwendig sind, entfallen.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Die NOx Schadstoffwerte werden im unteren Niveau stabilisiert, dieAbgaswerte insgesamt stabilisiert und geglättet.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Es wird eine stabile Fahrweise erzielt, da es keine großenTemperaturschwankungen im Oberofen gibt.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Seit Einsatz dieses Systems konnte keine Überhitzung der Kammernfestgestellt werden.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Das System ist für U-Flammenwannen wie auch Querflammenwannengeeignet.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Durch Ferndiagnose (Modem) ergibt sich die Möglichkeit derBrenneroptimierung und Fehlerlokalisierung bei der Abgasanalyse.- Mit dem System konnte der Luftüberschussfaktor weiter als bisherMit diesem System realisieren wir eine deutliche Reduzierung derStöreinflüsse im Bereich der zugeführten Brennenergie und somit kann dasBrennverhalten und der Flammenausbrand in der Glasschmelzwannereduziert werden.- Mit dem System konnte der Luftüberschussfaktor weiter als bisherMesssystem:- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Bei dem Meßsystem wird gegenüber der herkömmlichen Art NO-, CO-und O2-Gehalt gemessen und erfasst.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Das Ausgangssignal dieser Werte bezogen auf die Konzentration ist 4-20mA.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Durch die automatische Kalibrierung der Sensorik mittels Prüfgas, werdendie Wartungsintervalle auf ein Minimum gesenkt.- Mit dem System konnte der Luftüberschussfaktor weiter als bisher- Die Messgasentnahme wird unter Beachtung der Strömungsverhältnisseim Kammerkopf eingebaut.

Link zu weiterer Informationhttp://www.uas.de

Sauerstoffanlagen

Sauerstoffeinsatz für GlasschmelzwannenReduzierung von NOx durch die Verwendung von reinem Sauerstoff beider Verbrennung. Die Umstellung der Luft-Brennstoff-Gemische aufSauerstoff-Brennstoff-Gemische, die in USA schon seit 1970 im Gange ist,setzt sich auch in Europa immer mehr durch. Als wesentliche Vorteilegegenüber herkömmlich luftbefeuerten Wannen werden reduzierte NOxEmissionen, geringerer Einsatz von Primärenergie, in der Regel bessereGlasqualität, sowie verringerte Investitionskosten durch den Wegfall derRegeneratoren genannt. Wegen des geringeren Abgasstromes inOxy-Fuel-befeuerten Wannen reduziert sich die Partikelemission erheblich:Der durch Verstaubung entstehende Anteil sinkt um ca. 70%, der durchKondensation flüchtiger Komponenten hervorgerufene Anteil um 30-50 %gegenüber Luft-Brennstoff-befeuerten Wannen.Es werden aber auch wesentlich höhere Ansprüche an dieregelungstechnische Aufgabenstellung und Ausrüstung gestellt. Bei denbisher 9 Glasschmelzwannen die von UAS Messtechnik mit derSauerstofftechnologie ausgerüstet wurden, ist die Software und dieHardware immer weiterentwickelt worden. Inzwischen hat sich bei dermesstechnischen Ausrüstung ein bestimmter Standart ergeben, der einehochgenaue Regelung der Brennstoff-Sauerstoffgemische gewährleistet.Durch diese Maßnahme wurde der NOx Gehalt im Abgas bezogen auf 1kggeschmolzenes Glas von ca. 800 bis 2500 mg NOx pro m3 Abgas auf 250bis 280 mg NOx pro kg geschmolzenem Glas reduziert.Neuartige Regelung beim Einsatz von SauerstoffbrennernDie Ausrüstung der Gesamtanlagen mit Sauerstoffbrennern wurde erstmalsnach den neusten EN Normen und Vorschriften gemeinsam mit dem TÜVMünchen ausgearbeitet und erstellt. Dabei werden die Gesamtanlagen vonder Versorgung bis zum Brenner einschließlich aller Verbindungsleitungen,Regelorgane und Sicherheitstechnik nach diesen neu erstelltenVorschriften aufgebaut. Die Anlagen sind in dieser Art in Zusammenarbeitmit dem TÜV erstmals erstellt worden. Bei dieser Ausarbeitung mit demTÜV wurden auch die Sicherheitsvorschriften die, die wannenkritischenParameter betreffen, im Gesamtkonzept berücksichtigt.Hauptventilstand für SauerstoffDer gesamte sicherheitstechnische Bereich wirkt auf den Hauptventilstandder für die Sauerstoffversorgung der Gesamtanlage und das BACK - UPSystem die komplexe Einheit darstellt. Treten verfahrenstechnische-, oderversorgungstechnische Fehler auf, so werden die Schnellschlussventileinnerhalb der vorgeschriebenen Zeit geschlossen. Der Hauptventilstand hatzwei getrennte Einspeisungen, die erste Einspeisung wird direkt von derVSA, der ON-SIDE Anlage, versorgt. Die zweite Einspeisung wird von derTankanlage BACK UP System mit Sauerstoff versorgt, der Sauerstoffwird als Flüssigsauerstoff in einer Tankanlage gelagert und für dieNotversorgung bei Ausfall der VSA verwendet.Brennerventilstände




Bei den Brennerventilständen sind diese kompletten Einheiten für dieRegelung der Brenner, der Leistungsregelung und der Brennstoff -Sauerstoffgemischregelung ausgerüstet. Wobei hier der Genauigkeit imBereich der messtechnischen und regelungstechnischen Ausrüstung derhöchste Stellenwert zukommt.Bisher wurden Ventilstände mit 2 - 6 Brennern pro Wannenseite gebautund eingesetzt. Die gesamten Auslegungen und Berechnungen werdendurch die bei UAS Messtechnik entwickelten und erstellten Programmedurchgeführt. Optionell können alle Anlagen mit einemFerndiagnosesystem ausgerüstet werden, mit dem eine Fernwartung bishin zum Endgerät jederzeit gewährleistet ist. Dadurch ist es möglich denBetreiber der Anlage schnelle und kostengünstige Hilfe zukommen zulassen.

U p c y c l i n g G m b H + C o . K G

Address Rupprechtstraße 550937 KölnGermany

Telephone 0049-221-336688-60

Fax +49-221-336688-63

Internet Address www.upcycling.de


Booth Hall 13 B33



02.12 Environmental protection/ Recycling



GlasaufbereitungSteigende Qualitätsanforderungen an das Produkt und die eingesetztenRohstoffe führen nach wie vor zu einem gewissen Anteil an Fehlchargen.Sofern eine Verwertung vor Ort möglich, bietet UPCYCLING die Zerlegungvon Palettenware mit anschließender Sortierung und Verbringung insScherbensilo an.

Die Aufbereitung großer Mengen kann auch mit Hilfe mobilerBrecheranlagen durchgeführt werden.

V a l o r e f

Address Z.I. La Croisière84500 BolleneFrance

Telephone 0033-4-90405000

Fax 0033-4-90405001

Internet Address www.valoref.eu


Booth Hall 13 D37





Refractory productsShaped productsFor consumers of refractory products, Valoref commercialises not only newshaped products, but also products originating from a valorisation process.These products are available individually or as sets (complete under layersof hearths, day-tank, glass furnaces, etc...)Valoref has a very large stock of refractory products (silicon, insulatingmaterials, aluminous, electrocast, zircon, magnesium oxide) in differentforms (bricks, slabs or shaped parts such as quarl blocks or furnacearches). Part dimensions can be modified in Valoref's machining shop(equipped with debiteuses, diamond-powder coated sawblades, polishingmachines), while our design office produces furnace erection diagramsandconstruction drawings.Unshaped productsValoref makes also available various unshaped refractories originating fromstock excesses. The product range includes refractory castables, rammingmixes, cements and mortars of different sources.




V i p r o t r o n G m b H

Address Lise Meitner Str. 1064293 DarmstadtGermany

Telephone 0049-6151-80021-30

Fax +49-6151-80021-31

Internet Address www.viprotron.de


Booth Hall 14 D10



02.08 Insulation glass technology







Quality-Scanner-IG

In modern production process of insulated glass a reliable visual inspectionis indispensable to avoid cost intensive customer complaints. Present-day itis standard to trust nearly exclusive in manual inspection. But such humancontrols are not only extremely expensive, but also only restrictivelyconsistent. At the same time the expectations increases to rely 100% onthe quality. State of the art vision systems are today able to automate suchtasks with convincing results and also displace human inspectors for otherassignments.

With the Quality-Scanner-IG is now a low cost quality control systemavailable equipped with this innovative technology. Together with thenewest generation of intelligent CCD-cameras and an intuitive Windowsbased user interface, the Quality-Scanner-IG takes charge of a reliableIn-Line quality control. Directly integrated into the production process ofinsulated glass, this high performance system allows to guarantee yourcustomer a consistent and reproducible quality of the glass independent ofhuman motivation and abilities. Simultaneously a detailed documentationand archiving of the quality is achieved which allows you to prove the exactinspection details of a specific glass unit after even several months.Furthermore the Quality-Scanner-IG offers enough potential to optimiseyour productivity which automatically conducts to a preventive avoidance ofglass defects.

All visual defects like e.g. bubbles, scratches, stones, coating defects, tin,dirt, finger prints, foil defects, etc. larger than 0,5 mm² will be easilydetected by the Quality-Scanner-IG. The user friendly Windows interfaceallows you to define and illustrate the exact quality settings according to thespecific requirements of your customer.

The Quality-Scanner-IG which is completely integrated in the productionline after the washing machine, stops rejectable glass or gives a warningsignal before the glass will be further assembled. On the screen therejected glass will be visualized in details by displaying the precisecalculated defect positions within the defined quality zones. With such adetailed visualisation your employee will easily be able to immediatelylocate the defects on the glass. By integrating the Quality-Scanner-IG inyour production line you not only gain a high performance tool for improvedquality and productivity but also customer satisfaction and confidence.

Link zu weiterer Informationhttp://www.viprotron.de/doc/Viproton_GPD_2005.pdf




V i s i o n E l e c t r i c G m b H

Address Schloss-Straße 2567714 Waldfischbach-BurgalbenGermany

Telephone 0049-6333-2757-0

Fax +49-6333-2757-27

Internet Address www.vision-electric.com


Booth Hall 13 E49



03.11.03.02.05 Glass smelting/fusion technology



Vision®RailLösung für flächenmäßige EnergieverteilungVision®Rail ist die Lösung für flächenmäßige Energieverteilung z.B. inDatenzentren, Hochhäusern, Warenhäusern u. Fabrikhallen.FlexibilitätDer kontinuierliche Stromschienenquerschnitt von Vision®Rail ermöglicht den Einsatz einer Vielzahl von Abgangs- undVerteilungseinheiten an jeder beliebigen Stelle.Flächenmäßige EnergieverteilungIn Datenzentren wird durch die von Vision®Rail ermöglichte flächenmäßige Energieverteilung wertvolle Standfläche fürServer Racks anstelle von Schaltanlagenverteilern verfügbarParallel Verlaufende SchienensystemeZwei parallel verlaufende Schienensysteme versorgen dabei die ServerRacks, sowohl mit Haupt- als auch mit Notstrom

V I T R U M A G m b H & C o . K G

Address Alte Ludwigsstädter Straße 4a96317 KronachGermany

Telephone 0049-9260-9901-12

Fax +49-9260-9901-38

Internet Address www.vitruma.de


Booth Hall 14 A43




02.03.02.01 Decorative grinding technology for hollow glass



WALTER SPH Hydraulic two-column spring cage glass pressYear of construction: 1970location: Germanytechnical details:complete with built-in hydraulic unit,ready for operation, electrical installed,but without hydraulic oil,distance between column centres 650 mm,pressing capacity 2,5 tons,dwell pressure,incl. equipment for pressing with extremely low pressing power




W . H a l d e n w a n g e r , T e c h n i s c h e K e r a m i k G m b H & C o . K G

Address Teplitzer Straße 2784478 WaldkraiburgGermany

Telephone 0049-8638-6004-0

Fax +49-8638-8109-00

Internet Address www.haldenwanger.de


Booth Hall 10 G46








Tubes and more Tubes

The Haldenwanger tube range comprises of a total of 15 oxidic and carbidicmaterial in innumerable designs, among them Sillimatin 60 Type C 530,Alsint 99.7 Type C 799 and Pythagoras Type C 610, all complying with DINVDE 0335.

The main applications are in the area of thermal processes, but we are alsostrong partners in the areas of process equipment and scientific equipment.High application temperatures up to 2000 C, aggressive media, rapidtemperature changes - whatever the conditions - due to the extreme varietyof materials, we are able to offer a suitable ceramic tube for everyapplication. The tube will be custom-made for your application, also in itsdesign.

Protection tubes, insulators, radiant tubes, support tubes for electricheaters, beams, profiles, incineration aids and special fabrications. Rollers Fused Silica Rollers

Halsic Laboratory Porcelain Specialities Ballistics

W . L i n d n e r M a s c h i n e n G m b H

Address Wilhelm-Sedlbauer-Straße 1294481 GrafenauGermany

Telephone 0049-8552-9656-0

Fax +49-8552-14-10

Internet Address www.lindner.inet-nb.de


Booth Hall 14 D60


01.06.01 Gob feeder


01.06.03 Suck feeder

01.06.04 Bar feeder






01.06.14 Metering machine




04.01.04 Turning aids and lifting tools for glass makers







Type 213 / 216 / 217 Automatic Press MachinesThese machines are designed for automatic production of pressed glassarticles from lead crystal, soda-lime, or borosilicate glass in single gob ormulti gob operation. A solid machine table with integrated stepping unit ismounted on a sturdy base plate. The basic elements of the machines arethe novel table drive, and a hydraulic unit with proportional action,respectively proportional-servo action. (The machines are also availablewith pneumatic press cylinders or electric-motor driven press units). Theindexing plate is driven by an intermittently switching electronic motor via agearbox and a cylinder cam with The indexing plate is driven by anintermittently switching electronic motor via a gearbox and a cylinder camwith engaging stable cam rollers. With its sinusoidal motion characteristicsthe table drive guarantees jerk-free stepping on with

little vibration as well as exact positioning with shortest switching times.Additional table locking is not necessary.

The hydraulic pressing station with position encoder and standstill detectionallows highly accurate and controlled positioning of the press ram. Thepress cylinder is incorporated in a stable cross-member with three-pointsupport which is adjustable for height. One novel design of the presscylinder with fixed piston and movable cylinder allows small overall heightwith exact guidance and high lateral stability. Furthermore the hydraulicpress station is equipped with an integrated pneumatically operated springcage and with a quick-change unit with central coolant supply for the pressplunger.

A novel-design press table support takes up the pressing forces during thepressing process. The automatic pressing machine is equipped with twoseparate cooling-air systems. One cooling-air system, with central bottomsupply integrated in the machine table, serves for cooling the moulds. A fanair distributor with electronically controlled switch-off function during tablemovement cools the pressed glass articles from above.

Any conventional mould systems, such as block moulds with our withoutraising bottom, hinged moulds or basket moulds can be mounted on thepressing table. The machine can be equipped with supplementary devicessuch as take-out, kick out, optoelectronic scan-check, automaticallycontrolled ram cooling, automatically controlled top ring heating, and otherdevices.

As a standard charging of the automatic pressing machine is effected withspecial gob feeder type 307, type 314 or type 316S or also with a standardfeeder, i. e. our type 316.

The intelligent concept of the machine makes it possible to use indexingtables with various divisions (= number of moulds) and also in differentsizes.

Because of its stability we use the basic structure of the machine also forglass centrifuge machines. The powerful and comfortable electronic controlunit for this machine can also be used for controlling upstream machine(e.g. ball gatherer, feeder, etc.) as well as downstream stations (e.g.heat-smoothing machine, fire-polishing machines, transport devices, etc.)


Type 1263-Stat. Rotary-Blowing Machine

The type 126, 3-station rotary-blowing machine provides reliable andeconomical production of high quality stemware, tumblers, bowls, flutes andvases according to the press & blow process (static blown optionally). Theproduction of tumblers, vases and bowls is carried out automatically. Forstem ware, only the bowl is produced automatically. The stems and feet areadded using various manual processes. The great advantage of this newmachine lies in its enormous flexibility, the economic production of shortruns and the easy of production changes at the lowest tooling costs.

01.06.14 Metering machine

Type 317Diese dient ebenfalls, ähnlich wie der Saugspeiser, zur Herstellung vonGlasposten für die Mundbläser zur manuellen Weiterverarbeitung. Hierbeiwird das geschmolzene Glas über einen Fließfeeder, wie z. B. Type 316/S,der Dosierform zugeführt.

Die Dosierung der Glasmenge erfolgt über einen beweglichenFormenboden, der durch eine Bodenhub- und absenkeinheit elektronischgesteuert wird. Von dieser Dosierform nimmt der Glasmacher denmassiven, zylindrischen Glasposten mittels einer vorgewärmtenSpezialpfeife auf und verarbeitet ihn auf konventionelle Art zu einenfertigen Glasartikel.

Der Einsatz der Dosiermaschine bringt entscheidende Vorteile, wie z. B.:

- größere Wirtschaftlichkeit,

- höchste Qualität,

- Humanisierung des Arbeitsplatzes, usw.




W i r t h G m b H

Address Brehnaer Straße 106188 LandsbergGermany

Telephone 0049-34602-7088-0

Fax +49-34602-7088-111

Internet Address www.wirth-gmbh.com


Booth Hall 12 C29








Vacuum lifting devices

Link zu weiterer Informationhttp://www.wirth-gmbh.com


Vacuum lifting devices for construction site useVacuum lifting devices for construction site use from Wirth arecharacterized by load capacities between 300 and 1.700 kg, twoindependent vacuum cirles per device and ingenious safety features forsupervising of the vacuum circular flows and the power supply.

The developement of tailor-made sollutions with higher load cpacities,special mechanically, electrically or hydraulically traction units for theswivelling and turning movements is a daily challenge for us.



Vacuum suction cups for special applicationsWirth delivers special suction cups also for chequered and corrugatedsurfaces for machine and plant manufacturing .


W I T T - G a s e t e c h n i k G m b H & C o K G

Address Salinger Feld 4-858454 WittenGermany

Telephone 0049-2302-8901-0

Fax +49-2302-8901-3

Internet Address www.wittgas.com


Booth Hall 12 D07







02.01.04.02 Thermal snapping devices

05.01.02.02 Measurement, control and inspection of gas compounds




Mixed gases in glass productionA leap forward in productivity with the digital, all-in-one gas mixer

There is an enhanced burner supply now on the market. When used in themanufacture and forming of glass, it helps to reduce the costs incurredduring set-up and wastage during product changes. For this purpose, it isvery important to set up the mixed gas supply in such a way that it meetsyour requirements. WITT-Gasetechnik, a company specialising in gasmixing and analysis systems, now offers a tailor-made solution for thisproblem: the MDE product series of fully-electronic gas mixing and dosingsystems. This product series uses MFC technology (MFC = mass flowcontroller), and not only keeps set-up times extremely short but alsosupplies digital measurement data to ensure permanent quality control.

The MDE series, a timely further development from the field of conventionalanalogue instrumentation, will be presented for the first time to the generalpublic at the GLASSTEC (9 to 13 November, 2004 in Dusseldorf; hall 12,stand D76). However, this new generation of devices is already availableeven as you read this.

Even for experienced factory managers, product changes are a touchybusiness if the burner supply for separating, shaping, tempering, flamepolishing, burling or rounding must each be set individually for the productto be manufactured. This makes it necessary to optimally adjust the massflow of burnable gases and to counterbalance the ever presentdisturbances such as primary pressure fluctuations, burner changes andtemperature influences. By the time production is running smoothly, manyhours may well have been spent getting things right, and many more hoursdevoted to fine adjustments beyond the start-up phase a procedure whichany businessman would be happy to avoid.

Product changes in the twinkling of an eye

Things go very differently when using the new MDE series, which shouldnow enhance the productivity of many a factory. This mixing and dosing

system regulates the supply to a burner or any other consumer with gasmixtures consisting of two or more gases. Within this system, there beats adigital heart which is equipped with CMos sensors and maintains contactwith the outside world via interfaces.

Unlike analogue control engineering, the control electronics developed bythe Witten-based gas technology specialists ensures exact reproducibilityof any process parameter once it has been ascertained. The deviations donot exceed half of one percent of the final scale value, and in practice arenegligible. In terms of its control characteristics, the MDE series is a realsprinter as it reaches the required target values in less than 0.3 seconds.The device is equipped with an auto-calibration function to ensure rapid,accurate flow rate control. What does this mean for production? Productchanges can more or less be performed at the press of a button, as far asthe gas is concerned. The control function counterbalances externalinterference and keeps the values stable throughout the entire productioncycle. Manual re-adjustment (if the temperature changes for example) isnot necessary.

Built-in quality assurance

In the MDE series, the integrated digital RS-485 bus system allows remotecontrol from a PC on the serial interface, PLC machine control or theAWE/AWS evaluation systems from WITT. The electronics allow themachine operator to influence the flame setting while a process is inprogress or even to navigate ramps (slow increases or decreases inconsumption).

The chief attraction: the MDE series delivers a continuous data flow fromthe sensor to the control unit so that specific operating parameters can beascertained and monitored. The consumption levels of individual gases canalso be recorded accurately. In this way, the system meets therequirements for quality and cost inspection in this area of glass productionas well.

The only system of its type, the "MFC" from WITT -Gasetechnik combinesall components required for the burner supply in a single device. Separatebackflow valves, filters and solenoid valves are already integrated into it.This makes this WITT solution particularly easy to install. It is even easy tocombine several devices together, which can have positive effects wherespace requirements and building costs are concerned. Equipped with anintegrated flame non-return finger, the MDE series meets the strictest ofsafety requirements in common with all other WITT products.






Suchwort eingeben:


Suchwort eingeben:


Enter search key:

Y i l m a z c a n M a k i n e K a l i p s a n L t d .

Address Rami Kisla Caddesi Tikvesli Sok. 334055 IstanbulTurkey

Telephone 0090-212-61309-21

Fax 0090-212-57734-81

Internet Address www.yilmazcankalip.com


Booth Hall 13 B74





Glass Forming MoldsPress & Blow Molds

IS MoldsSpinning Molds




Z & J T e c h n o l o g i e s G m b H

Address Bahnstraße 5252355 DürenGermany

Telephone 0049-2421-691-0

Fax +49-2421-691-200

Internet Address www.zjtechnologies.de


Booth Hall 15 A36





Blanket Batch ChargersTwin-coupled charger unitsModular charger unitsElectric control systemsDoghouse dust-covers

Z e c c h e t t i S . r . l .

Address Via Galileo Galilei, 1-1/A42027 Montecchio E. / REItaly

Telephone 0039-0522-867411

Fax 0039-0522-866034

Internet Address www.zecchetti.it


Booth Hall 13 C83





Glass Containers1.2.3.4.5.6.7. Cold End LinesStacker unitsPalletizersPallet Handling ConveyorsTrayformersShuttle CarsDepalletizersMain features of Zecchetti Machines.1. FLEXIBILITY AND MODULARITYwe can:a. use the same groups even on machines having differentworking conceptsb. create various layout solutionsc. easily upgrade existing installations

2. EASY-TO-RUN UNITSFriendly useQuick and simple change-over jobsEasy maintenance.

3. LONG WORKING LIFE AROUND THE CLOCK Our first machines have been working 8 years, 24 hours/day,with ordinary upkeep and maintenance only, at world leadingCompany plants.




Z i p p e I n d u s t r i e a n l a g e n G m b H

Address Alfred-Zippe-Strasse97877 WertheimGermany

Telephone 0049-9342-804-00170 451 7679

Fax +49-9342-804-138

Internet Address www.zippe.de


Booth Hall 13 A31







01.03.08 Raw material technology and prewarming cullet technology



02.12.05 Waste water treatment




Recycling PlantsZIPPE recycling plants are desdigned to transform hot and cold wasteglass into remeltable cullet material around the clock and without any staffinvolvment, so contributing to environmental protection and avoiding thewaste of energy and raw materials.

Used cooling water can be filtered, chemically treated, cooled and so wellrecycled.


Einlegemaschine für ElektrowannenEigenentwickelte Maschinen wie Kratzerförderer, Brecher,Einlegemaschinen, Glasstandsregler und vieles mehr werden im HauseZIPPE hergestellt. Dies ermöglicht Produktentwicklungen und Testläufe inEigenregie.




F A I R G R O U N D M A P

H A L L M A P , H a l l : 1 0

E X H I B I T O RA29 BVD PECE spol. s r.o.F26 PEMCO International c/o PEMCO Emails S.r.l.B20-F Beijing Trend Hi-Tech Insulating Materials Co., Ltd.B20-H Ori Mould Technology Co., Ltd., SuzhouB19-D Changshu Jianhua Die Sets Co., Ltd.B20-E China Starlight Refractory Co., LtdG46 W. Haldenwanger, Technische Keramik GmbH & Co. KGC27-1 Podolskrefractories, JSCC27-1 Semiluki Refractory Plant, JSCC27-1 SteklopackE60 Supertrucks LtdE79 Liya Glass Co. Inc. (P.J.S.) Float Glass LineE34 Mineraux et MachinesB69 Dow Corning GmbHA65 Starshine GmbH & Co KG

H A L L M A P , H a l l : 1 6

E X H I B I T O RB40 Optima S.r.l.F29 Officine Mistrello S.r.l.C79 Giardina Officine Aeromeccaniche S.p.A.A21 Keraglass Engineering S.r.l.C19 FOR.EL S.p.A.D05 FOR.EL S.p.A.

H A L L M A P , H a l l : 1 3

E X H I B I T O RB63 EMMETI S.P.A.A17 Glass Service Inc.C56 Simtech S.p.r.l.A64 I.S. Maintenance Ltd.E13 AGK Hochleistungswerkstoffe GmbHC36 Electroglass Ltd.B37 System ResA31 Zippe Industrieanlagen GmbHF32 Glass Technologies S.r.l.F17 G-LEHRSC45 ICS Inex Inspection SystemsD13 PKI - Teplotechna Brno spol. s r.o.A23 Toledo Engineering Co. Inc. (Teco)A23 Tecoglas Ltd.A23 KTG Engineering Ltd.D53 Rescal S.A.C08 Carbone Lorraine Composants S.A.S.D31 IRIS Inspection MachinesA28 K rting Hannover AG, Bereich W, Industrie- und Prozessw rme,

FeuerungstechnikB40 New Hudson CorporationD75 All Glass S.r.l.C22 Euromatic S.r.l.D04 GPM-Glass Project Management and Used EquipmentD44 futronic GmbHD12 Eclipse, Inc.C82 ThimonA09 IMS Engineering LtdA63 Saint-Gobain SEFPROD30-6 Quantum Engineered Products, Inc.C17-1 Stewart EngineersE49 Vision Electric GmbHC71 Penelectro LimitedC71 BH-F (Engineering) Ltd.A93 Langendorf GmbHD37 ValorefA48 P-D Refractories, P-D Industries GmbH * Feuerfestwerke WetroF03 Dyson Thermal Technologies (Precision Ceramics)D38 A. & L. Rondot S.a.s.B12 Bernard et Bonnefond S.A.E05 Rurex-Stahl, Dr. Otto Kukla GmbHA41 Merkle Engineers, Inc.C04 Ramsey Products CorporationC83 Zecchetti S.r.l.B45 Emhart Glass SAC32 Pennine Industrial Equipment LtdC88 Interglass S.A. de C.V.

F12 Metra VerreD85 Khavar Bolour Co.D88 Skloform s.s.D05 Go To s.a.E18 Cestaro S.n.c.A36 Linde AG, Linde Gas DivisionD37 Alfaref GmbHF24 F ller Glastechnologie Vertriebs-GmbHE48 M.E. Schupp Industriekeramik GmbH & Co. KGE59 Bonaiti Pietro s.n.c.A55 Asahi Glass Ceramics Co., Ltd.A45 Bock EnergietechnikB33 Upcycling GmbH + Co. KGF36 Plansee Metall GmbHA75 Kanthal, ZN der Sandvik GmbHD32 CERHEC Ceramic and Heating Elements CompanyF54 F.O.R.T.E. S.r.l.B74 Yilmazcan Makine Kalipsan Ltd.E53 INMARA AGE52 Changshu Jing Gong Mould Mfg. Co., Ltd.D30-4 Casso-Solar CorporationA37 Hotwork International AGC71 Belgium Glass Equipment s.a.F49 F.I.C. (UK) LimitedC17-2 A.W.T. World Trade Europe B.V.C77 SGCCB32 BYC Rollmakers a Division of Cope Engineering (Radcliffe) LimitedF49 CNUD-EFCOE55 Automazioni Industriali Albertini S.r.l.F30 De Raedt Industrial FansC37 Mopavid, S.L.D16-6 HyRadix, Inc.A83 Inhom-98 Ltd.A72 C.RE.F.IN. S.r.l.C17-5 Glass Concepts International, Inc.B11 JCL Engineering Pte LtdF23 Skl rny Kavalier, a.s.E19 Bedogni Societ CooperativaB72 Logicon Engineers Pvt. Ltd.C12 Icebel, Lda.F28 Glassworks Hounsell LtdB75 Sklostroj Turnov CZ s.r.o.B59 ELIOG Kelvitherm Industrieofenbau GmbHC71 Stein HeurteyD67 LWN Lufttechnik GmbHD30-1 Billco Manufacturing, Inc.

H A L L M A P , H a l l : F G . 1 3

E X H I B I T O R01 Langendorf GmbH

H A L L M A P , H a l l : 0 9

E X H I B I T O RG26 Friedrich Farbglash tte GmbH, Kugler Colors C52 Nabertherm GmbHB40 Linn - High Therm GmbHD52 Siebenlist Glas Creativ-WerkstattB45 KSO-Gobi Ofenbau GmbHD59 Sebino Arte S.r.l.

H A L L M A P , H a l l : 1 1

E X H I B I T O RA40 F Laser Zentrum Hannover e.V. (LZH)B06 Kaveh Glass Industry GroupA40 D Grenzebach Maschinenbau GmbHA29 Dr. Gold & Co. KGE66 Ferro Corporation, Glass SystemsA44 MDI SCHOTT Advanced Processing GmbH

H A L L M A P , H a l l : 1 5

E X H I B I T O RB49 Grafotec Spray Systems GmbHE23 IfG Ingenieurb ro f r Glastechnik GmbHC27 Eirich GmbH & Co KG, Gustav, MaschinenfabrikE23 GRAFIX GmbH, Zerst ubungstechnikC49 Hager Sondermaschinenbau GmbHC21 Nirvana Technologies (P) Ltd.D33 GEROLD GmbH & Co. KG, MaschinenbauD49 Grenzebach Maschinenbau GmbHA56 EURO-TECH, Vakuum-, Hebe- und TransporttechnikB56 Fuchs Lubritech GmbHC07 Software & Technologie Glas GmbHB13 UAS Messtechnik GmbHC31 Heat UpA48 Raute Precision OyD07 COGNEX CorporationC28 JSJ Jodeit GmbHC28 EGLASS Machinery & Parts GmbHB55 Hubtex Maschinenbau GmbH & Co. KGF74 TEKA Maschinenbau GmbHD73 Parkinson-Spencer Refractories Ltd.A36 Z & J Technologies GmbHE16 Johnson Matthey Noble MetalsA37 Pannkoke Flachglastechnik GmbHC16 SVA Industrie-Fernseh-GmbHB61 Excelsius International GmbHC45 EME Maschinenfabrik Clasen GmbHF07 Torgauer Maschinenbau GmbHG74 Studio 1 S.r.l., Automazioni Industriali

H A L L M A P , H a l l : 1 7

E X H I B I T O RC60 Norddeutsche Seekabelwerke GmbH & Co. KG

H A L L M A P , H a l l : 1 4

E X H I B I T O RC61 MSK Verpackungs-Systeme GmbHA19 Gronemeyer Maschinenfabrik GmbH & Co.B14 Control & Heating-Systems, Dipl.-Ing. Rainer PilzD50 STRADA S.r.l.D60 W. Lindner Maschinen GmbHC60 Horn Glass Industries AGA24 Bosch Rexroth AG, Vertrieb und Marketing, Antriebstechnik ZahnketteA42 AMBEG Dr. J. Dichter GmbHA38 Omco International N.V.C77 Lynch Systems, Inc.A16 L winger GmbHE77 GPS Glasproduktions-Service GmbHA65 Save S.r.l.D71 BDF - Boscato & Dalla Fontana S.p.A.C57 DMA Maschinen- und Anlagenbau GmbH & Co. KGE24 Armatec Vierhaus GmbHD64 LAT Antriebstechnik GmbH & Co. KGC48 FIB Belgium, Le Four Industriel BelgeA56 HEYE International GmbHB50 Fibertec - Consortium GmbHD18 I-Scan Robotics Ltd.D70 Fonderie Valdelsane S.p.A.C70 Fonderie Bartalesi S.r.l.C71 OSC S.p.A., Glass Mould FactoryA26 Kararmaz Kalip San. ve Tic. Ltd. Sti.E09 Schunk Kohlenstofftechnik GmbHC70 Fima Olimpia Fonderie S.p.A.A09 Merkad Makina Kalip San. Ve Tic. Ltd. Sti.D65 M.T. Forni Industriali S.r.l.A61 Glass Technology International GmbHB57 Kreisel GmbH & Co. KGE78 FOND METALLI Conveyors S.r.l.E15 Cimec OyE70 Car-Met S.p.A.B09 Falorni Gianfranco S.r.l.B09 Batisti Meccanica S.r.l.A61 Schrader Glasformenbau GmbH & Co. KGA15 Rapidflame LimitedD10 Viprotron GmbHD61 AMIG S.r.l.A35 Hanic GmbH, Software f r GlasA55 Forma Glasmaschinen - Fr. Wilhelm Kutzscher GmbHE25 Pennekamp GmbH & Co OHG, ErnstE50 Antonini S.r.l.B09 Putsch - Meniconi S.p.A.C42 GLAMACO Maschinenbau GmbHE65 METAVIL, Lda

D63 OCMI-OTG S.p.A.A43 VITRUMA GmbH & Co. KGE56 Glass Service S.r.l.C15 NOVAXIONE24 Bystronic Maschinen AG

H A L L M A P , H a l l : 1 2

E X H I B I T O RE58 Saxonia Edelmetalle GmbHE31 Intco GmbHD07 WITT-Gasetechnik GmbH & Co KGA45 Beneq OyD20 Bekintex N.V.D36 Italcarrelli S.r.L.E22 KRS Recycling Systems GmbHB50 Ferlam TechnologiesB04 RHI Glas GmbHB04 REFEL S.p.A.B36 DSF Refractories & Minerals Ltd.C29 Wirth GmbHD58 S.I.G.MA. S.r.l., Refrattari Tecnici IndustrialiB37 AEG Power Supply Systems GmbHE59 IAL LtdD11 Rath AGC58 TEC REF S.r.l.D21 SMT Lager- und Transportsysteme GmbHB11 Metaltecno S.r.l. UnipersonaleD33 Reker Maschinenfabrik, AdolfB42 Datapaq GmbHE42 Dalian Baoli Color Glass Co., Ltd.E32 Kappel GmbH, RobertE32 Logistic System Pichler GmbHC51 Pneumofore S.p.A.B59 Saati S.p.A.

MyCatalog glasstec · EMail [email protected] Booth Hall 13 C17-2 PRODUCT OVERVIEW 01.03.02 Drying...

Documents

Transcript of MyCatalog glasstec · EMail [email protected] Booth Hall 13 C17-2 PRODUCT OVERVIEW 01.03.02 Drying...