My Activities at VECC during the last visit Hemen Kumar Kalita Gauhati University
description
Transcript of My Activities at VECC during the last visit Hemen Kumar Kalita Gauhati University
My Activities at VECC during the last visit
Hemen Kumar KalitaGauhati University
Special thanks to: Partha Pratim Bhaduri (VECC) 1
Outline: # First I've tried to read the mcpoints i.e. the information from the
input files and get the position co-ordinates of the corresponding mcpoints and by looping over all the mcpoints generated the following plots:
● Distribution of mcpoints
● x vs y and r distributions.
# Plots of Hit Efficiency per layer.(where Hit Efficiency =no. of Hits/no. of mcpoints)
# Plots of position resolution.
2
All the plots are generated for 1K Pluto and embedded events
3
4
For pluto For embedded
5
For pluto
For embedded
Layer # 1
Front side of Layer # 1
6
For pluto
7
x vs y dist. for layer # 1
For embedded
Front side of layer # 1 Back side of layer # 1
8For embedded
9
For embedded eventsFor pluto
Layer # 1 Front side of Layer # 1
10
For pluto
Front side of layer # 1
Layer # 1
11For embedded events
12
For pluto
For embedded
Front side of layer # 1
Layer # 1
13For pluto
layer # 1 Front side of layer # 1
14For embedded
Hit Efficiency per layer =no. of Hits per layer / no. of mcpoints per layer
15
For pluto
16
Hit Efficiency per layer =no. of Hits per layer / no. of mcpoints per layer
For embedded
Float_t delx = (x_mcp – x_h); // position resolution for x
Float_t dely = (y_mcp – y_h); // position resolution for y
Float_t delz = (z_mcp – z_h); // position resolution for z
* ' *_h represent the position of the hit and * ' * _mcp represent the position of the associated mcpoint.
17For pluto
18For pluto
19
Float_t delx = (x_mcp – x_h); // position resolution for x
Float_t dely = (y_mcp – y_h); // position resolution for y
Float_t delz = (z_mcp – z_h); // position resolution for z
* ' *_h represent the position of the hit and * ' * _mcp represent the position of the associated mcpoint.
For embedded
20For embedded
Summary:-
# Now I can read the information from the input files i.e. mcpoints, mctracks and extract
track parameters from there.
# Can generate all the plots for each layer i.e. station by station.
# Can get the track ID and get the corresponding Pdgcode of the track.
# Can calculate hit efficiency per layer and plot the graph
# Can get the position resolution and compare the distribution of mcpoints with the associated mcpoints of the hits.
21
Thank You