Angelantoni Industrie S.p.A. - Steril Division

Export Office

Via Achille Grandi 16, 20017 Mazzo di Rho (MI) – ITALY ���� +39 02 939 701 43 / ���� +39 02 939 701 21

Head Quarter

Località Cimacolle 464 – 06056 Massa Martana (PG) - ITALY � +39 075 489551 ���� +39 075 8955200

TD_MVF_08.doc Pag. 1 Rev. January 08

MVF LAF MODULAR SYSTEM

ARTICLE DESCRIPTION CODE MVF2 basic module 00260000000 HMVF2 half module 00276000000 MVF3 module 00284900000

Introduction

The MVF modules can be variously assembled together to build-up small to room size clean work areas. The basic module is a self-contained unit including HEPA filter and fan for delivering class ISO 5 air quality, accordiing to norm ISO EN 14644-1 and can be assembled according to the needs of the clean area configuration. The modules bolted together form a network structure to get a stiff assembling.

Composition of the system

The dimensions of the unit are the following:

HMVF Depth 680 mm Length 680 mm Height 500 mm

MVF2 Depth 1360 mm Length 680 mm Height 500 mm

MVF3 Depth 985 mm Length 985 mm Height 500 mm

Main characteristics

• Made of Stainless Steel AISI 304 L with scotch

brite finishing; • Diffusion and Protection Grid for pre-filter and

HEPA Filter in anodised aluminium; • Modules MVF2 and MVF3 have a double intake

fan rated to deliver 1.200 Nm³/h at air velocity of 0,45 m/s and at max. pressure of 320 Pascal;

• Module HMVF has a double intake fan rated to deliver 550 Nm³/h at air velocity of 0,45 m/s and at max. pressure of 320 Pascal;

• Improved design plenum in negative pressure to prevent risk that contaminated air might escape

TD_MVF_08.doc Pag. 2 Rev. January 2004

by-passing filter and to reduce pressure transition losses, noise level and uneven air velocity profile; • Outlet for D.O.P. testing; • Differential manometer outlet; • Differential pressure switch in each module; • Module MVF2 has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822), with

dimensions 610x1220x66 mm; • Module HMVF has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822),

with dimensions 610x610x66 mm; • Module MVF3 has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822), with

dimensions 915x915x66 mm; • All MVF modules are provided of prefilter G 3 according EN 779. • Electrical supply 230 V/50 Hz monophase; • Maximum power consumption for each module 620W;

Control panels

Remote control panel • AISI 304 stainless steel • IP 55 protection degree • Overall dimensions 600 x 600 x 250 (WxDxH) • General switch with door lock device; • “ON” (LAF) press button; • “OFF” (LAF) press button; • ON/OFF push button for the fluorescent lamp; • Alarm mute press button; • Green light of the laminar air flow (if green light flashes the air flow is irregular);

Jolly control set (ABS material) • Ventilation (LAF) On/Off • Light On/Off • Fan velocity manual adjusting trimmer • Available on the panel remote

Norms and directive

The MVF Modules are designed according to the following standards and directives: • EN 60204-1 • LVD-Directive 72/23/EEC-93/68/EEC

IMPORTANT !! The system we produce, according to the above statements, are manufactured in compliance with the laws on safety into force. Particularly, it is manufactured in compliance with Art. 6 Dlgs 626/94 and its modification (Italian law in compliance with European Directive EEC 89/391) on the DUTY OF DESIGNERS, OF MANUFACTURERS, OF SUPPLIERS AND INSTALLATORS. The system is NOT submitted to the directive EEC 93/42 on Medical Devices, as indicated in the definition of “Medical Devices” reported in art. 1 point 2a of the Directive mentioned. STERIL IS NOT responsible for damages to people and objects due to a non proper use of the system, and due to a fail to comply with the user instructions and maintenance that is always supplied with the system.

Performances

• Air velocity measured at a distance of 300 mm: 0.45 m/s ± 10%; • Contamination Class of the area under the laminar airflow: ISO 5 in “as built” conditions, according to norm ISO EN

14644-1.

TD_MVF_08.doc Pag. 3 Rev. January 2004

Tests control

In our Quality Control Dept., according to our procedure WI-MFG-006 included in the Quality manual of Steril Equipment Division. The Quality System of Steril S.p.A. Equipment Division is certified in compliance to EN ISO 9001-2000 with a Certificate n° CERT-00669-95-AQ-MIL-SINCERT/B released by “DNV – Det Norske Veritas”. On request, validation tests at site with IQ/OQ protocols are available.

COMISSIONING (on request) STERIL will carry out the start-up at Client’s site with the following controls:

• check of the laminar air flow velocity; • check of the air cleanliness according to norm ISO EN 14644-1; • DOS test on HEPA filters(inerti gas like nitrogen at customer charge);

UTILITIES BATTERY LIMIT

Power lines at Client’s charge.

DOCUMENTATION

• Electric diagram; • Maintenance and operator’s manual; • Warranty certificate.

TD_MVF_08.doc Pag. 4 Rev. January 08

N^ 4 GOLFARI

VISTA LATERALE

40 1280 40

1360

100

100

30

620

30

30 1300 30

M12

VISTA DALL'ALTO

PASSACAVO A MEMBRANAPER ALIM. ELETTR.

89 502 178 502 89

VISTA / SEZIONE FRONTALE

680

4060040

480

VISTA FRONTALE

680

40 600 40

89 502 89

57.5

330

112.5

30

380

90

500

20

500

680

1360

MODULO MVF2

DIMENSIONI D'INGOMBRO

2600.000

15-4-94

00260000000

2600

.000

A

A

PTIMA EMISSIONE SC AB

340 680 340340 340

LETTER DATE DESCRIPTION APP.CHDBY

REV.DWG.N

APPROVED FOR CONSTRUCTION

SIGNATURE

DWG. REV. DATE

SCALE

REVISIONS

THIS DWG. SUPERSEDES

THIS DWG.SUPERSEDED BY

DWG N

THIS DRAWING IS THE PROPERTY OF STERIL AND IS LENT WITHOUT CONSIDERATION

THE APPARATUS SHOWN IN THE DRAWING IS COVERED BY PATENTS .

OTHER THAN THE BORROWER 'S AGREEMENT THAT IT SHALL NOT BE REPRODUCED

PURPOSE OTHER THAN THAT FOR WHICH IT IS SPECIFICALLY FURNISHED.COPIED LENT OR DISPOSED OF DIRECTLY OR INDIRECTLY , NOR USED FOR ANY

1:5

cod.=

rif. SP.TEC. TOLL-001

rif. SP.TEC. PAINT-001

NOT SPECIFIED TOLLERANCE :

PAINTING:

MVF2 DRAWING

TD_MVF_08.doc Pag. 5 Rev. January 2004

VISTA LATERALE

VISTA DALL'ALTO

VISTA / SEZIONE FRONTALE

MODULO MVF3

DIMENSIONI D'INGOMBRO

2849.000

00284900000

2849

.000

A

A

PRIMA EMISSIONE SC AB

n^4 fori M12

985

30 925 30

passacavo a membranaper alimentazione elettrica

985

3092

530

100

100

500

2048

0

985

40 905 40

40 905 40

492.5 492.5

57.5

330

112.

5VISTA FRONTALE

40 905 40

492.5 492.5

3038

090

24-10-97

LETTER DATE DESCRIPTION APP.CHDBY

REV.DWG.N

APPROVED FOR CONSTRUCTION

SIGNATURE

DWG. REV. DATE

SCALE

REVISIONS

THIS DWG. SUPERSEDES

THIS DWG.SUPERSEDED BY

DWG N

THIS DRAWING IS THE PROPERTY OF STERIL AND IS LENT WITHOUT CONSIDERATION

THE APPARATUS SHOWN IN THE DRAWING IS COVERED BY PATENTS .

OTHER THAN THE BORROWER 'S AGREEMENT THAT IT SHALL NOT BE REPRODUCED

PURPOSE OTHER THAN THAT FOR WHICH IT IS SPECIFICALLY FURNISHED.

COPIED LENT OR DISPOSED OF DIRECTLY OR INDIRECTLY , NOR USED FOR ANY

1:5

cod.=VERNICIATURA:

TOLLERANZE NON SPECIFICATE:

rif. SP.TEC. TOLL-001

rif. SP.TEC. PAINT-001

MVF3 DRAWING

TD_MVF_08.doc Pag. 6 Rev. January 2004

N^ 4 GOLFARI

VISTA LATERALE

40 600 40

680

10

0

100

30

62

03

0

30 600 30

M12

VISTA DALL'ALTO

PASSACAVO A MEMBRANAPER ALIM. ELETTR.

89 502 89

VISTA / SEZIONE FRONTALE

680

4060040

48

0

VISTA FRONTALE

680

40 600 40

89 502 89

57

.53

30

11

2.5

30

38

09

0

50

0

20

50

0

68

0

680

MODULO HMVF2

DIMENSIONI D'INGOMBRO

2760.000

00276000000

2760

.000

A

A 31-01-95 EMESSO SC

LETTER DATE DESCRIPTION APP.CHDBY

REV.DWG.N

APPROVED FOR CONSTRUCTION

SIGNATURE

DWG. REV. DATE

SCALE

REVISIONS

THIS DWG. SUPERSEDES

THIS DWG.SUPERSEDED BY

DWG N

THIS DRAWING IS THE PROPERTY OF STERIL AND IS LENT WITHOUT CONSIDERATION

THE APPARATUS SHOWN IN THE DRAWING IS COVERED BY PATENTS .

OTHER THAN THE BORROWER 'S AGREEMENT THAT IT SHALL NOT BE REPRODUCED

PURPOSE OTHER THAN THAT FOR WHICH IT IS SPECIFICALLY FURNISHED.

COPIED LENT OR DISPOSED OF DIRECTLY OR INDIRECTLY , NOR USED FOR ANY

1:5

cod.=

rif. SP.TEC. TOLL-001

rif. SP.TEC. PAINT-001

NOT SPECIFIED TOLLERANCE :

PAINTING:

HMVF2 DRAWING

TD_MVF_08.doc Pag. 7 Rev. January 2004

VISTA FRONTALE

480

40 1280 40

1360

92.5

330

57.5

SEZIONE "B-B"

B

B

PANNELLO MAGNEHELIC

540

2040

MAGNEHELIC

PK5

H1

L0

(libero)

PORTAGOMMA

TUBETTO EXTRAFLEX

4.2x19

340

100

PANNELLO MAGNEHELIC

680

1360

4/6

n

n

(MAGNAHELIK PANEL)

(TCTCr SELF-THREADING SCREW)

VITE AUTOFIL. TCTCr

(EXTRAFLEX BAROMETRIC PIPE)

(CONNECTOR)

(FREE)

(MAGNAHELIK PANEL)

(FRONT VIEW)

(SECTION)

TD_M

VF_08.doc

P

ag. 8

Rev. January 2004

MVF213

60

2

3

2

3

680 680

1360

MVF2

PART. "X"

PART. "X"

PARTICOLARE UNIONE MODULI

DADO IN GABBIA M10

RONDELLA 10

VITE TE M10x20

89

89 89

17.5

21

.5

20

40

PART. "X"

3

21 - L.= 680 mm. - COD: 05260000701

- L.= 1330 mm. - COD: 05260000702

- L.= 1360 mm. - COD: 05260000703

(WASHER)

(TE SCREW)

(FASTENING NUT)

(MODULES FASTENING DETAIL)