MUSTER FIRE EQUIPMENT PRODUCT CATALOGUEfire extinguisher is recommended for Class A fires (wood,...
Transcript of MUSTER FIRE EQUIPMENT PRODUCT CATALOGUEfire extinguisher is recommended for Class A fires (wood,...
MUSTER FIRE EQUIPMENTPRODUCT CATALOGUE
www.musterfire.com
Introducing the new range of MUSTER Fire Extinguishers which are available in various models and sizes, and are designed to quickly control and extinguish flames.
Muster and the Muster logo are registered trademarks of JSG Industrial Systems Pty Ltd
The MUSTER range of Fire Equipment was
introduced by JSG Industrial Systems to
compliment the range of Muster Fire Suppression
Systems, protecting machinery and personnel
while reducing the risk of OH&S incidents.
The range of Muster Fire Equipment include:
� Portable extinguisher � Mobile extinguisher � Automatic extinguisher � Fire Blankets extinguisher � Fire Hose Reels
The extinguisher mediums used in the Muster Fire Extinguisher’s are:
� Carbon Dioxide (CO2) � Foam (AFFF) � Air/Water � Wet Chemical (Fire Extinguisher Solution) � Dry Powder (ABE Dry Chemical Powder) � Dry Powder (BE Dry Chemical Powder) � Fire Blanket (Fibreglass)
CONTENTS
FIRE EXTINGUISHER GUIDE
Type of Fire, Class and Suitability 4
PORTABLE FIRE EXTINGUISHERS
ABE Powder Type 5
ABE Powder Type – High-Performance 6
Carbon Dioxide (CO2) Type 7
AFFF Foam Type 8
Air/Water Type 9
Wet Chemical Type 10
EXTINGUISHER VEHICLE BRACKETS
Heavy Duty Vehicle Brackets 11
Heavy Duty Aluminium Brackets 11
Heavy Duty Over Centre Vehicle Brackets 11
Heavy Duty Adjustable Strap and Buckle Brackets 11
MUSTER FIRE BLANKETS 12
ABE AUTOMATIC FIRE EXTINGUISHER 13
MOBILE FIRE EXTINGUISHERS
ABE Powder Type 14
BE Powder Type 15
Carbon Dioxide (CO2) Type 15
AFFF Foam Type 16
FIRE HOSE REELS
Standard Fire Hose Reel 17
LKS Fire Hose Reel 18
Stainless Steel Fire Hose Reel 19
Fire Hose Reel Covers 20
Fire Hose Reel Accessories 21
Fire Hose Reel Stop Valves 23
Fire Hose Reel Nozzles 24
Fire Hose Reel Foam Branch Kit 24
MUSTER PORTABLE FIRE EXTINGUISHER ACCESSORIES
UV Extinguisher Bags 25
9 inch Security Ties 25
Service Punch 25
Date Tag Metal 25
Date Tag Metal Split Ring 25
LOCATION & EXTINGUISHER ID SIGNS
Location Signs 26
Extinguisher Location Signs 26
SERVICING FIRE EQUIPMENT
Servicing Requirements 27
Servicing Personnel 27
4 JSG Industrial Systems
FIRE EXTINGUISHER GUIDE
P PULL THE PIN
A AIM LOW AT THE BASE OF THE FIRE
S SQUEEZE THE HANDLE TO SPRAY THE FIRE
S SWEEP FROM SIDE TO SIDE AT THE BASE OF THE FIRE UNTIL EXTINGUISHED
DON’T FORGET THE
P.A.S.SWORD
Type of Fire, Class and Suitability
PRE 1997 CURRENTEXTINGUISHING
AGENT
A B C E F
COMMENTS
D
Wood Paper Plastic
Flammable & Combustible
Liquids
Flammable Gases
Electrically Energised Equipment
Cooking Oils & Fats
Metal Fires
WaterDangerous if used on flammable liquid, energised electrical equipment and cooking oil/fat fires.
Wet ChemicalDangerous if used on energised electrical equipment.
Foam LIMITEDDangerous if used on energised electrical equipment.
Powder
ABE Look carefully at the extinguisher to determine if it is a BE or ABE unit as the capability is different.BE
Carbon Dioxide LIMITED LIMITEDNot suitable for outdoor use or smouldering deep seated A Class Fires.
Vaporising Liquid LIMITED LIMITED
Check the characteristics of the specific extinguishing agent. 5 Yearly servicing must be done by ODS & SGG licenced persons.
Fire Blanket LIMITED* LIMITED
* Fire Blankets may be used as a thermal barrier against radiated heat and to control a fire in clothes being worn by a person.
Use
only
spe
cial
pur
pose
ext
ingu
ishe
rs a
nd s
eek
expe
rt ad
vice
.
= the class or classes in which agent is most effective = not recommend for these class of fires
LIMITED = indicates that the Extinguishant is not the agent of choice for the class of fire, but it may have a limited extinguishing capability
LIMITED* = solvents such as alcohol or acetone mix with water and therefore require special foam
Litre
5JSG Industrial Systems
PORTABLE FIRE EXTINGUISHERS
ABE Powder Type
Muster ABE Fire Extinguishers are distinguished by a white coloured band around the top of the cylinder. The ABE Powder type are type suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment. It is also important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fine powder is discharged that may cause specific concerns or damage.
Features include stainless steel handles, steel cylinder, brass valve and powder coated red finish. These extinguishers are available in a range of sizes, from a 2.1kg model to a 9.0kg model suitable for industrial applications. The ABE range also offers a range of high performance fire extinguisher.
PART NUMBER 43-G1ABE-FF2 43-G1.5ABESVB 43-G2.5ABEVB 43-G4.5ABE 43-G9ABE
Fire Class Compatibility Class A,B,C,E Class A, B, C, E Class A, B, C, E Class A, B, C, E Class A, B, C, E
Agent Capacity 1.0kg 1.5kg 2.5kg 4.5kg 9.0kg
Agent Type ABE Dry Chemical Powder
ABE Dry Chemical Powder
ABE Dry Chemical Powder
ABE Dry Chemical Powder
ABE Dry Chemical Powder
Total Mass 1.8kg 3.2kg 4.3kg 7.2kg 13.9kg
Fire Rating 1A:10B:E 2A:30B:E 3A:40B:E 4A:60B:E 6A:80B:E
Approvals AS/NZS 1841.5 AS/NZS 1841.5 AS/NZS 1841.5 AS/NZS 1841.5 AS/NZS 1841.5
Nozzle Size 4.0mm 3.0mm 3.8mm 4.6mm 6.0mm
Pressure 1000 kPa 1400 kPa 1400 kPa 1400 kPa 1400 kPa
Discharge Time 8 seconds 12 seconds 14.3 seconds 19 seconds 22 seconds
Dimensions (w) x (h) 88 x 290mm 100 x 370mm 130 x 383mm 145 x 480mm 183 x 615mm
Cylinder Pressure Test 5 Yearly 5 Yearly 5 Yearly 5 Yearly 5 Yearly
Periodic Test Pressure 2.5 MPa 2.5 MPa 2.5 MPa 2.5 MPa 2.5 MPa
Cylinder Construction Steel Steel Steel Steel Steel
Valve Construction Brass Brass Brass Brass Brass
Cylinder Finish Powder Coated Red Powder Coated Red Powder Coated Red Powder Coated Red Powder Coated Red
Handle Finish Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Valve Finish Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass
Bracket Vehicle Vehicle Vehicle & Wall Wall Wall
6 JSG Industrial Systems
ABE Powder Type – High-Performance
The Muster Hi-Performance ABE Powder type models are distinguished by a white coloured band around the top of the cylinder. With the introduction of a new powder, a thicker walled cylinder, a new heavy duty valve and handle with double rivets, JSG offers a class leading product which is capable of extinguishing the fiercest of fires with greater efficiency.
Ideally suited in circumstances where a faster and safer ‘knock down’ is required such as mine sites, service stations and any high risk area due to its improved rating of 4A:80BE. Muster ABE Fire Extinguishers are suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment.
PART NUMBER 43-G4.5ABEHP 43-9ABEHP
Fire Class Compatibility Class A, B, C, E Class A, B, C, E
Agent Capacity 4.5kg 9kg
Agent Type ABE Dry Chemical Powder ABE Dry Chemical Powder
Total Mass 7.8kg 14.2kg
Fire Rating 4A:60B:E 6A:80B:E
Approvals AS/NZS 1841.5 AS/NZS 1841.5
Nozzle Size 4.4mm 6mm
Pressure 1400 kPa 1400 kPa
Discharge Time 19 seconds 22 seconds
Dimensions (w) x (h) 145 x 560mm 183 x 555mm
Cylinder Pressure Test 5 Yearly 5 Yearly
Periodic Test Pressure 2.5 MPa 2.5 MPa
Cylinder Construction Steel Steel
Valve Construction Brass Brass
Cylinder Finish Powder Coated Red Powder Coated Red
Handle Finish Stainless Steel Stainless Steel
Valve Finish Nickel Plated Brass Nickel Plated Brass
Bracket Wall Wall
7JSG Industrial Systems
Carbon Dioxide (CO2) Type
The Muster Carbon Dioxide (CO2) type fire extinguishers are distinguished by a black coloured band around the top of the cylinder. The CO2 models use a non-conductive and non-corrosive CO2 gas to reduce the amount of oxygen available to the fire, effectively smothering the fire. Muster ABE Fire Extinguishers are suitable for use in electronic environments. The CO2 gas does not leave behind residue when used to extinguish a fire.
PART NUMBER 43-G3.5CO2 43-G5.0CO2
Fire Class Compatibility Class E Class E
Agent Capacity 3.5kg 5.0kg
Agent Type Carbon Dioxide Carbon Dioxide
Total Mass 9.0kg 12.0kg
Fire Rating 5B:E 10B:E
Approvals AS/NZS 1841.6 AS/NZS 1841.6
Reference Number 22111-DG-7105 22111-DG-7106
Discharge Time 10.5 to 14 seconds 11 to 16 seconds
Dimensions (w) x (h) 153 x 535mm 153 x 680mm
Cylinder Pressure Test 5 Yearly 5 Yearly
Periodic Test Pressure 21.5 MPa 21.5 MPa
Cylinder Construction Aluminium Aluminium
Valve Construction Brass Brass
Cylinder Finish Powder Coated Red Powder Coated Red
Handle Finish Stainless Steel Stainless Steel
Valve Finish Nickel Plated Brass Nickel Plated Brass
Bracket Wall Wall
8 JSG Industrial Systems
AFFF Foam Type
The Muster AFF Foam type fire extinguisher is distinguished by a blue coloured band around the top of the cylinder. This extinguisher contains a concentrate mixed with water and is best suited for the fires that involve flammable materials and combustible liquids such as paper, textiles, wood, petrol, oil, paints, plastics and rubber. Features include stainless steel cylinder, stainless steel handles, brass valve and a powder coated red finish.
PART NUMBER 43-G9LAFFF
Fire Class Compatibility Class A,B
Agent Capacity 9.0 Litres
Agent Type AFFF Concentrate
Total Mass 12.1kg
Fire Rating 3A:30B
Approvals AS/NZS 1841.4
Reference Number 20422-LM-5401
Pressure 700 kPa
Discharge Time 32 seconds
Effective Range 6.0m
Dimensions (w) x (h) 181 x 630mm
Cylinder Pressure Test 5 Yearly
Periodic Test Pressure 2.5 MPa
Cylinder Construction Stainless Steel
Valve Construction Brass
Cylinder Finish Powder Coated Red
Handle Finish Stainless Steel
Valve Finish Nickel Plated Brass
Bracket: Wall
9JSG Industrial Systems
Air/Water Type
The Muster Air/Water type fire extinguisher does not have a coloured band around the top of the cylinder. This type of fire extinguisher is recommended for Class A fires (wood, paper, plastics, textiles, rubber and rubbish). The Muster 9.0 Litre Air/Water extinguisher acts to reduce the burning temperature so that the fire can be brought under control. It is important to remember that this type of extinguisher is not to be used on flammable and combustible liquids, electrically energised equipment and cooking oils and fats as this may enhance the fire. Features include stainless steel handles and cylinder, brass valve and powder coated red finish.
PART NUMBER 43-G9LAW
Fire Class Compatibility Class A
Agent Capacity 9.0 Litres
Agent Type Air & Water
Total Mass 12.1kg
Fire Rating 3A
Approvals AS/NZS 1841.2
Reference Number 20421-LM-2401
Pressure 700 kPa
Discharge Time 65 seconds
Effective Range 6.0m
Dimensions (w) x (h) 175 x 630mm
Cylinder Pressure Test 5 Yearly
Periodic Test Pressure 2.5 MPa
Cylinder Construction Stainless Steel
Valve Construction Brass
Cylinder Finish Powder Coated Red
Handle Finish Stainless Steel
Valve Finish Nickel Plated Brass
Bracket: Wall
10 JSG Industrial Systems
Wet Chemical Type
The Muster 7.0 Litre Wet Chemical type fire extinguisher is distinguished by a oatmeal coloured band around the top of the cylinder. This type of fire extinguisher is especially designed for fat and oil fires (Class F), Muster’s 7.0 Litre Wet Chemical extinguisher uses saponification agents to quickly kill the fire and stop re-ignition. It is able to do this by forming a thick layer on the fat or oil, turning it into a soap like substance. This extinguisher is also suitable for Class A fires (wood and paper). Features include stainless steel handles, stainless steel cylinder, brass valve and a powder coated red finish.
PART NUMBER 43-G7LWC
Fire Class Compatibility Class A,F
Agent Capacity 7.0 Litres
Agent Type Wet Chemical
Total Mass 11.6kg
Fire Rating 3A:4F
Approvals AS/NZS 1841.3
Reference Number 2126-LM-3403
Pressure 700 kPa
Discharge Time 60 seconds
Dimensions (w) x (h) 181 x 630mm
Cylinder Pressure Test: 5 Yearly
Periodic Test Pressure 2.5 MPa
Cylinder Construction Stainless Steel
Valve Construction Brass
Cylinder Finish Powder Coated Red
Handle Finish Stainless Steel
Valve Finish Nickel Plated Brass
Bracket Wall
11JSG Industrial Systems
EXTINGUISHER VEHICLE BRACKETS
Note: The smaller Muster fire extinguishers come with a car mounting bracket already included, most others come with a wall “hanger” type mounting bracket as standard.
Heavy Duty Over Centre Vehicle Brackets
Muster’s Heavy Duty Vehicle Bracket Over Centre Style will fit up to 4.5kg or 9.0kg Fire Extinguisher. The main feature of these brackets is the quick release handle which allows instant access to the extinguisher.
PART NUMBER BRACKET TYPE
43-WVBOC45 4.5kg Over Centre Bracket – Gal.
43-WVBOC9 9.0kg Over Centre Bracket – Gal.
Heavy Duty Aluminium Brackets
Musters Heavy Duty Aluminium Bracket has a secure, quick release bracket and is the ideal for maritime applications. The bracket will fit 4.5kg to 9.0kg Extinguishers.
PART NUMBER BRACKET TYPE
43-WVBA 4.5kg to 9.0kg – AluminiumFor Maritime Use.
Heavy Duty Adjustable Strap and Buckle Brackets
Musters Strap and buckle Bracket is fully adjustable to suit 2.5kg to 9.0kg Extinguishers..
PART NUMBER BRACKET TYPE
43-WVBBW 2.5kg to 9.0kg – Gal.Strap and Buckle.
Heavy Duty Vehicle Brackets
Heavy duty, black powder-coated, secure, quick-release, fire extinguisher vehicle brackets, Suitable for mounting on car, truck, caravan, boat, earthmoving equipment, tractor or any situation where the extinguisher could be damaged by vibration.
PART NUMBER BRACKET TYPE
43-WVBH70025 2.5kg DCP – Black
43- WVBC45 4.5kg DCP – Black
43-WVBPC9 9.0kg DCP – Black
12 JSG Industrial Systems
MUSTER FIRE BLANKETS
The Muster range of quality fire blankets are durable, easy to use and are certified to Australian Standards AS/NZS 3504. The Muster fire blankets consist of a woven fibre glass fire resistant fabric and is a fast and efficient way to control one of the most dangerous types of domestic fire, for example the ignition of cooking oil on the kitchen stove.
Also suitable to fight these fire types: stove top fires – fat fires, cooking oils and clothing fires. Ideal for use in kitchen, caravan and boat.Whether the blanket is placed on top, or surrounding it, the job of the blanket is to cut off the oxygen supply to the fire, thereby putting it out.
� Comes in storage pouch � Easily mounted – Suitable for hanging inside
of cupboard door � Quick release tabs � Easy and fast installation � Certified to Australian � Standards AS/NZS 3504 � 1 Year Warranty
After use leave the fire blanket in place to allow the oils or fats to cool down, it is essential that once the fire blanket has been used that it be disposed of.
PART NUMBER SIZE APPROVALS
43-FS100 1 x 1m AS/NZS 3504
43-FS120 1.2 x 1.2m AS/NZS 3504
43-FS128 1.2 x 1.8m AS/NZS 3504
43-FS180 1.2 x 1.8m AS/NZS 3504
13JSG Industrial Systems
PART NUMBER 43- M6KGAUTO79 43- M9KGAUTO79
Fire Class Compatibility Class A,B Class A,B
Agent Capacity 6.0kg 9.0kg
Agent Type ABE Dry Chemical Powder ABE Dry Chemical Powder
Total Mass 9.5kg 14.0kg
Pressure 1400 kPa 1400 kPa
Dimensions (w) x (h) 230 x 360mm 300 x 350mm
Cylinder Construction Mild Steel Mild Steel
Valve Construction Brass Brass
Cylinder Finish Powder Coated Red Powder Coated Red
Valve Finish Nickel Plated Brass Nickel Plated Brass
ABE AUTOMATIC FIRE EXTINGUISHER
Muster Automatic Extinguishers work using a specially modified sprinkler valve which bursts at 79°C. Ideally placed above flammable liquid bays or dangerous goods areas.
14 JSG Industrial Systems
MOBILE FIRE EXTINGUISHERS
ABE Powder Type
Muster’s range of mobile/wheeled extinguishers is best used where a large amount of fire extinguishing agent is required. The ABE mobile extinguisher can be used on Class A, B, C and E fires. Features include stainless steel cylinder, ultra-high UV powder coated red finish and a galvanised powder coated red trolley. The ABE Extinguishers are available in 30kg, 50kg, 70kg and 90kg sizes.
PART NUMBER 43-M30ABEM 43-M50ABEM 43-M70ABEM 43-M90ABEM
Fire Class Compatibility Class A, B, E Class A, B, E Class A, B, E Class A, B, E
Agent Capacity 30kg 50kg 70kg 90kg
Agent Type ABE Dry Chemical Powder ABE Dry Chemical Powder ABE Dry Chemical Powder ABE Dry Chemical Powder
Total Mass 70kg 90kg 120kg 140kg
Tyres Hard Rubber Hard Rubber Hard Rubber Hard Rubber
Fire Rating 6A:80B:E 6A:80B:E 6A:80B:E 6A:80B:E
Dimensions (w) x (d) x (h) 480 x 500 x 1140mm 480 x 500 x 1140mm 500 x 610 x 1260mm 510 x 610 x 1260mm
Cylinder Pressure Test 5 Yearly 5 Yearly 5 Yearly 5 Yearly
Periodic Test Pressure 2.7 MPa 2.7 MPa 2.7 MPa 2.7 MPa
Cylinder Construction Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Valve Construction Brass Brass Brass Brass
Handle Steel Steel Steel Steel
Cylinder Finish Powder Coated Red Powder Coated Red Powder Coated Red Powder Coated Red
Handle Finish Painted Red Painted Red Painted Red Painted Red
Valve Finish Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass
15JSG Industrial Systems
PART NUMBER 43-M50BEM
Fire Class Compatibility Class B, C,E, F
Agent Capacity 50kg
Agent Type BE Dry Chemical Powder
Total Mass 90kg
Tyres Hard Rubber
Fire Rating 6A:80B:E
Dimensions (w) x (d) x (h) 480 x 500 x 1140mm
Cylinder Pressure Test 5 Yearly
Periodic Test Pressure 2.7 MPa
Cylinder Construction Stainless Steel
Valve Construction Brass
Handle Steel
Cylinder Finish Powder Coated Red
Handle Finish Painted Red
Valve Finish Nickel Plated Brass
PART NUMBER 43-M45CO2M
Fire Class Compatibility Class E
Agent Capacity 50kg
Agent Type Carbon Dioxide
Total Mass 45kg
Tyres Hard Rubber
Fire Rating 10B
Cylinder Dimensions 260 x 1500mm
Dimensions (w) x (d) x (h) 500 x 600 x 1635mm
Cylinder Pressure Test 5 Yearly
Periodic Test Pressure 250 bar
Cylinder Construction Steel
Valve Construction Brass
Handle Steel
Cylinder Finish Powder Coated Red
Handle Finish Painted Red
Valve Finish Nickel Plated Brass
BE Powder Type
The Muster 50kg BE Mobile extinguisher is Best suited to Class B, C, E and F fires. It is useful on diesel fires, cooking oils and fats. Features include a stainless steel cylinder, ultra-high UV powder coated finish and a galvanised red powder coated trolley.
Carbon Dioxide (CO2) Type
Muster’s 45kg CO2 Mobile extinguisher is best suited for marine vessels. Features include a light steel cylinder, 1” NGT finish and an ultra-high UV finish.
16 JSG Industrial Systems
AFFF Foam
Muster’s 30 Litre, 50 Litre, 70 Litre and 90 Litre AFFF Foam Mobile Extinguishers are best suited to Class A and B fires. These fires include ordinary combustibles such as wood, paper, plastics, rubber and rubbish as well as flammable and combustible liquids such as petrol. They have a stainless steel cylinder, ultra-high UV powder coated red finish and a galvanised red powder coated trolley.
PART NUMBER 43- M30LAFFF 43- M50LAFFF 43- M70LAFFF 43- M90LAFFF
Fire Class Compatibility Class A, B Class A, B Class A, B Class A, B
Agent Capacity 30 Litres 50 Litres 70 Litres 90 Litres
Agent Type AFFF Concentrate AFFF Concentrate AFFF Concentrate AFFF Concentrate
Total Mass 70kg 90kg 120kg 140kg
Tyres Hard Rubber Hard Rubber Hard Rubber Hard Rubber
Fire Rating 3A:30B 3A:30B 3A:30B 3A:30B
Dimensions (w) x (d) x (h) 480 x 500 x 1140mm 480 x 500 x 1140mm 500 x 610 x 1260mm 500 x 610 x 1260mm
Pressure 1620 kPa 1620 kPa 1620 kPa 1620 kPa
Cylinder Pressure Test 5 Yearly 5 Yearly 5 Yearly 5 Yearly
Periodic Test Pressure 2.7 MPa 2.7 MPa 2.7 MPa 2.7 MPa
Cylinder Construction Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Valve Construction Brass Brass Brass Brass
Handle Steel Steel Steel Steel
Cylinder Finish Powder Coated Red Powder Coated Red Powder Coated Red Powder Coated Red
Handle Finish Painted Red Painted Red Painted Red Painted Red
Valve Finish Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass
17JSG Industrial Systems
FIRE HOSE REELS
Standard Fire Hose Reel
With a weight of 22kg (approx.), this reel is easy to operate and is constructed of heavy duty parts making this Fire Hose Reel suited to almost any application. The Hose Reel is fitted with an adjustable nozzle that can be adjusted from fogging to a continuous stream. Our Fixed Fire Hose Reel comes with all parts required, including 25mm Ball Valve (including nozzle locking device), Hose Guide and Wall Bracket.
PART NUMBER 43-HREEL36
Std Hose Length & Diameter 36m x Ø19mm
Approvals AS/NZ 1221
Minimum Inlet Pressure 220 kPa
Maximum Working Pressure 1350 kPa
Front and Back Plates Steel Signal Red
Support Assembly Mild Steel Zinc Plated
Guide Arm Swivel Zinc Plated
Ball Valve Assembly Zinc Coated Brass
Nozzle Twist Action Brass
Pipe Galvanised
Valve Galvanised
Gasket Rubber
Elbow Galvanised
Mounting Plate Steel Signal Red
Inlet Pipe / Union Galvanised
Dimensions (w) x (d) x (h) 550 x 220 x 550mm
18 JSG Industrial Systems
LKS Fire Hose Reel
With a weight of 27kg (approx.), this reel is easy to operate and is constructed of heavy duty parts making this Fire Hose Reel suited to almost any application. The Hose Reel is fitted with a valve type nozzle allowing adjustment of a continuous stream. Our Fixed Fire Hose Reel comes with all parts required, including 25mm Ball Valve (including nozzle locking device), Hose Guide and Wall Bracket
PART NUMBER 43-HREEL
Std Hose Length & Diameter 36m x Ø19mm
Approvals AS/NZ 1221 1997
Minimum Inlet Pressure 220 kPa
Maxiumum Working Pressure 1350 kPa
Front and Back Plates Steel Signal Red
Support Assembly Mild Steel Zinc Plated
Guide Arm Swivel Zinc Plated
Ball Valve Assembly Brass/Zinc Coated Handle
Nozzle Twist Action Brass
Pipe Galvanised
Valve Galvanised
Gasket Rubber
Elbow Galvanised
Mounting Plate Galvanised
Inlet Pipe / Union Galvanised
Dimensions (w) x (d) x (h) 555 x 245 x 555mm
19JSG Industrial Systems
Stainless Steel Fire Hose Reel
Weighing only 22kg (approx.), the Stainless Steel Fire Hose Reel is reel is easy to operate and is the ideal Fire Hose Reel for maritime use and meets or exceeds requirements of Australian Standards AS1221. The Hose Reel is fitted with a valve type nozzle allowing adjustment of a continuous stream. Our Fixed Fire Hose Reel comes with all parts required, including 25mm Ball Valve (including nozzle locking device), Hose Guide and Wall Bracket
PART NUMBER 43-HREEL36SS
Std Hose Length & Diameter 36m x Ø19mm
Approvals AS/NZ 1221
Minimum Inlet Pressure 220 kPa
Maxiumum Working Pressure 1350 kPa
Front and Back Plates Stainless Steel
Support Assembly Stainless Steel
Guide Arm Stainless Steel
Ball Valve Assembly Stainless Steel
Nozzle Twist Action Brass
Pipe Galvanised
Valve Galvanised
Gasket Rubber
Elbow Galvanised
Mounting Plate Stainless Steel
Inlet Pipe / Union Galvanised
Dimensions (w) x (d) x (h) 550 x 220 x 550mm
20 JSG Industrial Systems
Fire Hose Reel Covers
Hose reel covers assist in protecting Fire Hose Reels from environmental damage.
PART NUMBER DESCRIPTION
43-HRCF Hose Reel Cover Fitted
PART NUMBER DESCRIPTION
43-HRC Outdoor Heavy Duty Hose Reel Cover
PART NUMBER DESCRIPTION
43-HRC-HD Heavy Duty Hose Reel Cover PVC
21JSG Industrial Systems
Fire Hose Reel Accessories
PART NUMBER DESCRIPTION
43-HREEL36-MFU Male-Female Union
PART NUMBER DESCRIPTION
43-HREEL36-MP Mounting Plate
PART NUMBER DESCRIPTION
43-HRGF8SS Hose Guide Arm Stainless Steel
PART NUMBER DESCRIPTION
43-HREEL36-MPSS Mounting Plate Stainless Steel
PART NUMBER DESCRIPTION
43-HRGF8 Hose Guide Steel Multi-Purpose
PART NUMBER DESCRIPTION
43-HREEL36-IP Muster Inlet Pipe
22 JSG Industrial Systems
Fire Hose Reel Accessories (cont.)
PART NUMBER DESCRIPTION
43-HROTKT Hose Reel OTK Clamp Crimping Tool
PART NUMBER DESCRIPTION
43-HR1936 Replacement Hose 19mm x 36m
PART NUMBER DESCRIPTION
43-HRCLAMP-CRIMP Clamp for Hose Reels
PART NUMBER DESCRIPTION
43-STHR Hose Reel Replacement Label – SAV – Ø165mm
PART NUMBER DESCRIPTION
43-STHRLARGE Hose Reel Replacement Label – PVC – Ø317mm
PART NUMBER DESCRIPTION
43-HRAKS HR Hose Anti Kink Spring
PART NUMBER DESCRIPTION
43-HRGMP Hose Guide Arm – Bolt On Type
23JSG Industrial Systems
Fire Hose Reel Stop Valves
PART NUMBER DESCRIPTION
43-HREEL35-BV Fire Hose Reel Stop Valve – Female/Female 25mm
PART NUMBER DESCRIPTION
43-HREEL36-BVSS Stainless Steel Fire Hose Reel Stop Valve – Female/Female 25mm
PART NUMBER DESCRIPTION
43-HF25WGV Fire Hose Reel Stop Valve – Male/Female 25mm
PART NUMBER DESCRIPTION
43- HF25LKFFS Universal Fire Hose Reel Stop Valve – Male/Female 25mm
24 JSG Industrial Systems
Fire Hose Reel Foam Branch Kit
The Hose Reel Foam Branch Kit is a simple foam branch pipe with foam pickup capability which comes in 6% foam proportioning. The HFB-001 is designed to be used with Muster AFFF and other low expansion AFFF type fire fighting foams.
PART NUMBER DESCRIPTION
43-HFB-001 Hose Reel Foam Branch Kit
Fire Hose Reel Nozzles
PART NUMBER DESCRIPTION
43-WNTPS Fire Hose Reel Nozzle – Plastic. Twist Style with 19mm Tail
PART NUMBER DESCRIPTION
43-WNT Fire Hose Reel Nozzle – Brass. Twist Style with 19mm Tail
PART NUMBER DESCRIPTION
43-WNTJS Fire Hose Reel Nozzle – Bumper – Brass. Twist Style Jet Spray. Rubber Bumper with 19mm Tail
PART NUMBER DESCRIPTION
43-WNL Fire Hose Reel Nozzle – Twist Styler – Brass. Lever Style with 19mm Tail
25JSG Industrial Systems
MUSTER PORTABLE FIRE EQUIPMENT ACCESSORIES
UV Extinguisher Bags
Muster’s Plastic extinguisher cover bags are thick large bags that suit 4.5kg, 6kg or 9kg extinguishers and are UV treated. Clear with the words “fire extinguisher” on them.
PART NUMBER EXTINGUISHER SIZE
43-WUVS 4.5kg
43-WUVL 6.0kg & 9.0kg
9 inch Security Ties
PART NUMBER DESCRIPTION
31-SECTIE Thick tamper proof seals
Service Punch
PART NUMBER DESCRIPTION
43-WPU Maintenance punch (numbered 1 to 5)
Date Tag Metal
PART NUMBER DESCRIPTION
31-TESTTAG Maintenance Date Tags are made from aluminium
Date Tag Metal Split Ring
PART NUMBER DESCRIPTION
31-SECRING Maintenance Date Tag split ring to secure tag
26 JSG Industrial Systems
LOCATION & EXTINGUISHER ID SIGNS
Location Signs
These signs are placed above Extinguishers when installed in and around buildings. Two types are available flat mount and 90 degree, both are made from plastic.
Extinguisher Location Signs
These signs are placed above Extinguishers when installed in and around buildings. The sign identifies the Extinguisher type and are all made from plastic.
PART NUMBER PRODUCT DISPENSED
43- SABE ABE Dry Chemical Powder
43-SAF Foam
43-SW Water
43-SWC Wet Chemical
43-SCO2 Carbon Dioxide
PART NUMBER DESCRIPTION
43- SILS ABE Dry Chemical Powder
43-SILS-ANGLE Angle Mount Location Sign
27JSG Industrial Systems
Fire equipment installed in all commercial, public and multi-occupancy residential buildings all need to be regularly inspected and tested. The inspection, test and maintenance procedures for fire equipment is specified in the Australian Standard AS 1851 “Maintenance of Fire Protection Systems and Equipment”.
There are some key points that the general community and property owners should be aware of to ensure they receive the appropriate level of servicing.
Servicing Requirements
� All equipment is to be inspected every six months. � When an extinguisher does not have a pressure gauge, they need to be weighed to make sure they are full. � Extinguishers need to be replaced or emptied, pressure tested and refilled every five years. � The test and servicing dates are to be recorded on a metal tag attached to the unit. � As long as the extinguisher is in a serviceable condition then there is nothing else to be done, unless the gauge indicates the unit
is under pressure or the weight is too low. � Any additional work needed to be carried out must be approved by the client before being carried out. � Extinguishers must be refilled if only partially discharged. � All fire equipment has to be tested in accordance to AS1851-2012.
Servicing Personnel
� Servicing technicians need to identify themselves to a person responsible for the building before completing any work. � Extinguisher servicing companies and their technicians have no authority to enforce legislation. � The service personnel should sign off all necessary documentation and then explain what service work they are charging for. � Small and large service companies carry out equipment servicing. Only in Queensland do the service technicians need to be
licensed. � There are courses in equipment maintenance available nationally. These courses are not relevant if the company is only supplying
the pre-stamped new equipment.
SERVICING FIRE EQUIPMENT
Extinguishers need to be replaced if not charged Make sure the Date Tag is stamped correctly Signage must be installed and clear to read
Every effort has been made to ensure all information and photographs contained in this publication were correct and accurate at time of printing, however no warranty is given in respect of this publication and JSG Industrial Systems Pty Ltd (JSG) shall not be liable for any error therein. Technical information, specifications and products shown may be subject to change without prior notice. Pictures shown are for illustration purposes only. WARNING: For sale and proper use consult instructions, the supplier or JSG. Contact your nearest JSG Distributor for latest information.
© 2015 JSG Industrial Systems Pty Ltd., All rights reserved.
MFE
0115
HEAD OFFICEUnit 1, 21 Amour St Revesby NSW 2212 PO Box 333 Milperra NSW 2214 Ph: (02) 9914 8720 Fax: (02) 9914 8798 Email: [email protected]
www.musterfire.com
Sydney | Melbourne | Perth | Brisbane | Adelaide | Townsville | Mackay | Indonesia
Your authorised JSG distributor: