Municipal Tractors July, 2020 Discount off List Pricing ...

T-652Municipal Tractors725-720

Municipal TractorsDiscount off List Pricing

Specification 5.0

July, 2020

Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Email Address:

Spec. Number Information Requested Answer

5.1 MANUFACTURER: STEINER

5.2 DATE OF PRICE LIST/CATALOG: 7/30/2020

5.3 PERCENTAGE DISCOUNT FROM LIST PRICE BASE UNIT: 21.50%

ATTACHMENTS: 21.50%

5.4 PRICE FOR ADDITIONAL MANUALS (Note: One of each included in purchase at no cost, per specs)ADDITIONAL SERVICE MANUAL

Digital 275.00$ Paper 275.00$

ADDITIONAL PARTS MANUAL Digital 125.00$ Paper 125.00$

ADDITIONAL OPERATIONS MANUAL Digital 40.00$ Paper 40.00$

5.5 STANDARD WARRANTY: (Hours, Months, Years) 2 YEARS

5.6 PERFORMANCE/ WARRANTY OPTIONSUse this section to offer performance/warranty options.Use as many lines as needed.(Specify years, miles or hours extended term covers.)

$$$

5.7 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.

Hourly Rental Rate: $Weekly Rental Rate: $

Monthly Rental Rate: $Percent (%) of Rental Fee applied to purchase price: %

5.8 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.

DEDUCT cost per Used Hour from the original Contract Price $10.00

5.9 DELIVERY STARTING POINT - City, State, ZipCity: Shakopee

State: MNZIP: 55379

Price Per Loaded Mile:

$2/MI + DESTINATION CHARGE ON THE LAST PAGE OF PRICE PAGES

Minimum Delivery Charge (If Applicable): $

5.10 INSTALLATION - PER HOUR (Hourly Shop Rate):(Installation services may be requested on an "as needed" basis.) $125.00

5.11 PRICE FOR SET OF FLUID AND AIR FILTERS (if applicable) $45

SCOTT FAHEYLANO EQUIPMENT, INC. SHAKOPEE

952-445-6310SHAKOPEE, MN 55379

[email protected]

3021 133RD ST W

mailto:[email protected]

mailto:[email protected]

All Prices in U.S. Dollars Page 1 of 39

THE FOLLOWING UPDATES HAVE BEEN MADE TO THIS DOCUMENT:

Date Description of Change

7/1/2020 Created Steiner Price List

*Certain Specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Steiner

equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.

Steiner Price List

Steiner MSRP Price List

2020 Price Book

BOBCAT COMPANY PRICE PAGES

Steiner® MSRP Price List Please note the following when using Steiner Price Pages: - All prices are shown in U.S. dollars.


Hitch Front - Steiner® Quick-Hitch System Rear - Standard 2" receiver hitch

Frame Oscillating Articulating

Transaxles (2) Peerless® 2600 dual-range

Brakes Single, mechanical disc

Forward / Reverse Foot Pedal Control

Weight Transfer Hydraulic (on the fly adjustments) Warranty - 2 Years

Unit weight......................................................

Shipping weight.............................................. Hydraulic Pump Capacity - Standard Flow.... Lift, steering aux pressure.............................. Hydraulic oil capacity..................................... Speed Hi Range (Fwd. / Rev)........................ Speed Low Range (Fwd. / Rev)...................... Width Standard............................................... Width W/ 3" Extensions................................. Width W/ Dual Wheel Kit.............................. Overall Length (ROPS Up)............................ Height W/ ROPS Up....................................... Height W/ ROPS Folded................................ Wheelbase....................................................... Frame Oscillation............................................ Turning Radius............................................... Slope Rating- Single Tires (std).................... Slope Rating- 3" Wheel Extensions............... Slope Raiting- Dual Wheel Tires................... Slope Rating w/ Cab...................................... Fuel Tank Capacityy .......................................

450-25

1665 lbs. 1845 lbs.

450 Tractor

450-32

1660 lbs. 1875 lbs.

6 gpm @ 3600 rpm 1750 PSI

5.25 US Gallons 9.5 mph / 7 mph 6 mph / 4.5 mph

44.5" 50.5" 66.5" 80.5" 73.5" 55"

43.5" 9"

43.5" 20° Max

25° 30° Max

10 7 UUS Gallons

450-37

1575 lbs. 1784 lbs.


450 Tractor 450-25 / 450-32 / 450-37

Standard Equipment

Quick Specs

Engine 24.8 HP Kubota® D902 Diesel, Liquid-cooled, 898 cc 32.5 HP Kubota® WG972 gas, Liquid-cooled, 962 cc 37 HP Vanguard® M61 EFI gas, Air-cooled, 993 cc

Tire options Field Trac / 22x12-10 (All Terrain) Bar / 22x12-10 Turf / 22x11-10

Additional Features Parking Break Dual LED headlights and Taillights High-Back bucket seat

Storage compartment Cup Holder Front and rear Skid Plates ROPS Bar 12 Volt outlet, 15 amp


2020 Price Book


Part 450 Tractors Number Description MSRP In US $

Kubota® Diesel - Liquid Cooled

75-75025BR 450-25 KDL BAR TIRE ............................................................................................. $22,097 75-75025FT 450-25 KDL FLD TRX .............................................................................................. $22,097 75-75025TF 450-25 KDL TURF TIRE ........................................................................................... $22,097

Kubota® Gas - Liquid Cooled

75-75032BR 450-32 KGL BAR TIRE ............................................................................................. $22,373 75-75032FT 450-32 KGL FLD TRX .............................................................................................. $22,373 75-75032TF 450-32 KGL TURF TIRE ........................................................................................... $22,373

Briggs & Stratton Vanguard® EFI - Air Cooled

75-75037BR 450-37 HP EFI BAR TIRE ......................................................................................... $20,125 75-75037FT 450-37 HP EFI FLD TRX .......................................................................................... $20,125 75-75037TF 450-37 HP EFI TURF TIRE........................................................................................ $20,125

Est. Set up Time: 1.5 - 2 hours

450 Tractor

450 Tractor 450-25 / 450-32 / 450-37



2020 Price Book

Steiner MSRP Price List 2020 Price Book

Page 4 of 39 450DX Tractor

All Prices in U.S. Dollars

Engine Hitch 25 HP Vanguard® M54 Gas, Air-cooled, 896 cc Front - Steiner® Quick-Hitch System

Rear - Standard 2" receiver hitch

Tire options Frame Field Trac / 22x12-10 (All Terrain) Oscillating

Articulating

Transaxles (2) Peerless® 2600 series, single-speed

Instrumentation Engine temperature and Fuel Gauge Tachometer Hour Meter

Forward / Reverse Foot Pedal Control Warranty - 2 years

Hydraulic Pump Capacity - Standard Flow............................................ Lift, steering aux pressure....................................................................... Hydraulic oil capacity............................................................................. Speed (Fwd. / Rev.)................................................................................. Unit weight.............................................................................................. Shipping weight....................................................................................... Width Standard........................................................................................ Width W/ 3" Extensions.......................................................................... Width W/ Dual Wheel Kit....................................................................... Overall Length (ROPS Up)..................................................................... Height W/ ROPS Up............................................................................... Height W/ ROPS Folded......................................................................... Wheelbase............................................................................................... Frame Oscillation.................................................................................... Turning Radius........................................................................................ Slope Rating- Single Tires (std)............................................................. Slope Rating- 3" Wheel Extensions........................................................ Slope Raiting- Dual Wheel Tires............................................................

Slope Rating w/ Cab................................................................................ Fuel Tank Capacity.................................................................................

Standard Equipment

450DX Tractor 450DX-25

Photo

Quick Specs

Additional Features Parking Break Dual LED headlights and Taillights Cup Holder

ROPS Bar Recharging - 20 amp




450DX 6 gpm @ 3600 rpm

1750 PSI 5.25 US Gallons

7.2 mph / 5.1 mph (Unofficial) 1531 lbs. 1718 lbs.

44.5" 50.5" 66.5" 80.5" 73.5" 55"

43.5" 9"

43.5" 20° Max

25° 30° Max

10° 7 US Gallons




Part 450DX Tractor Number Description MSRP In US $

Briggs & Stratton Vanguard® - Air Cooled

75-75125FT 450DX-25 HP VNGRD FLD TRX........................................................................... $17,629 *This is a base model single speed 450. See specs for comparison

Est. Set up Time: 1.5 - 2 hours

Part Exclusive 450DX Tractor Accessories - Dealer Installed Number Description MSRP In US $

75-71318

Kit - 450DX Skid Plate.............................................................................................. Optional kit that provides protection to the under side of the tractor (Std on 450)

$224

Est. Set up Time: 1 Hour

75-71319 KIT-450DX 12V power & Storage.......................................................................... Optional kit that provides 12V power and storage compartment

$90

Est. Set up Time: 0.25 - .5 hours

450DX Tractor 450DX-25

2020 Price Book Page 6 of 39

Accessories All Prices in U.S. Dollars

Tractor Accessories

Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $

75-71200 DW200 - Dual Wheel Set - Field Trax................................................................. $1,321

Available on 440, 450 and 450DX Optional Kit for work on 30° slopes, added floatation, stability and traction

Est. install time: 1.5 - 2 hours

75-71201 DW201 - Dual Wheel Set - Bar Tread................................................................. $1,249



75-71202 DW202 - Dual Wheel Set - Turf Tire.................................................................. $1,231



75-71206 WS200 - 3" Wheel Spacer Kit.............................................................................. $270

Available on 440, 450 and 450DX

Optional Kit for added stability and traction when working on slopes 25° or less. Not compatible with the Dual Wheel Kit.

Est. install time: 1 hour

75-71203 WB200 - Weight Bar, Front................................................................................. $222

Available on 440, 450 and 450DX Optional kit that provides additional stability when towing or using 3-pt hitch.

Est. install time: 0.25 hours



75-71204 WB201 - Weight Kit.............................................................................................. $411

Available on 440, 450 and 450DX (4) 50 Lb. weights included (Weights only)






75-71312 KIT - 450 Fender................................................................................................... $244

Available on 450 and 450DX

Optional kit that helps protect the operator from mud and debris that is kicked up by the front tires.

Est. install time: 1 -2 hours

75-71325 Kit - Foot Pegs, 450............................................................................................... $112


Optional kit that provides additional comfort and support. Not compatible with deluxe cab


75-71308 Suspension Seat..................................................................................................... $654

Available on 450 and 450DX Optional kit that provides additional comfort while operating the tractor

Est. install time: 1 - 1.5 hours

75-71324 Kit - HC450 - Hand Control 450.......................................................................... $157


Optional kit that provides added stability and more finite control. For all NEW production tractors. See Note 1

Est. install time: 3 - 5 hours

75-71306B Kit - HC450 - Hand Control................................................................................. $171

Available on 440, 450 and 450DX Optional kit that provides added stability and more finite control. See Note 2

Est. install time:

Serial Number Breaks

Tractor Accessories



3 - 5 hours

Note 1

Note 2

450 Diesel: 75-75025XX - 461+ / 450 Gas: 75-75032XX - 292+ / 450 Briggs: 75-75037XX - 341+ / 450DX Briggs: 75-75125FT - 166+

450 D iesel: 75-75025XX - 272-460 / 450 Gas: 75-75032XX - 180-291 / 450 Briggs: 75-75037XX - 196-340 / 450DX: 75-75125FT - 0-165 / 440 Tractors: ll



75-71311 KIT - 450 Low Seat Plate..................................................................................... $108

Available on 450 Optional kit that lowers seat by approximately 1"


75-71211 Treadle Pedal Kit.................................................................................................. $39

Available on 440, 450 and 450DX Optional kit for improving control and making directional changes easier

Est. install time: 0.5 - 1 hour

75-71214 Engine Overheat Protection System.................................................................... $105

Available on 440 and 450 (Kubota Engines only) Optional kit for protecting the engine against overheating.

Est. install time: 1 hour

75-71316 KIT - Power Outlet, Front................................................................................... $140


Optional kit that provides an on/off switch as well as a momentary reversing switch and directional control of certain attachments.


75-71322 Kit - Power Outlet, Rear...................................................................................... $184


Optional kit that provides an on/off switch as well as a momentary reversing switch and directional control of certain attachments.


75-71228 Slope Meter Kit..................................................................................................... $40

Tractor Accessories

Available on 440, 450 and 450DX Optional kit that mounts on top of the tractor to indicate the degree of a slope




Page 8 of 39


75-71315 Kit - Back up Beeper, 450..................................................................................... $182

Available on 450 and 450DX Optional kit that provides an audible signal when moving in reverse


970649 Kit - ROPS Canopy............................................................................................... $349

Available on 235, 440, 450 and 450DX Optional hard top canopy to protect against the sun and rain

Est. install time: 0.25 - 0.5 hour

75-71209A 3-Point Hitch - Cat-1............................................................................................. $710

Available on 440, 450 and 450DX (Cat-1) 3-pt hitch. (Requires Front & Rear Aux. Hydraulics Kit 75-71323)

Est. install time: 10 hours

75-71323 Kit - Front & Rear Aux. Hydraulics................................................................... $779

Available on 450 and 450DX Optional kit that allows for the mounting of a second set of hydraulic couplers in the


75-71205A QH200 - 3-Point Quick Hitch/Weight Bar......................................................... $297

Available on 440, 450 and 450DX Allows for the use of Quick-Hitch™ attachments to be run off the back of the

Est. install time: 1-2 hours

Part Dealer Installed Accessories - Order From Parts Number Description MSRP In US $

Kits

970646 Kit - 450 F/R Foot Pedal Update W/ Control Link Modulator........................ $

Tractor Accessories

Must order from the parts. See note 3 Est. install time: 1.5 - 2 hours

Serial Number Breaks

Note 3 450 Diesel: 75-75025XX - 0-271 / 450 Gas: 75-75032XX - 0-179 / 450 Briggs: 75-75037XX - 0-195 /

450DX Briggs: 75-75125FT - 0-164





75-71215B All Weather Deluxe Cab Enclosure ................................................................... $6,104

Available on 440, 450 and 450DX Tempered glass windows shield the operator from wind, snow, dust and rain. Windows can be vented or removed.



75-71221

Water Heater Kit.................................................................................................. $619

Available with liquid cooled engines only Optional kit that provides heat to the interior of the cab.

Est. install time: 2 - 3 hours (Reduced if installed at same time as cab)

75-71229 Quick Disconnect Heater Hose Kit...................................................................... $132

Available on the Deluxe Cab Optional kit that assists in removing water heater kit for easier removal of cab

Est. install time: .25 - .5 hours (Reduced if installed at same time as cab)

75-71309 KIT - LED Light - Deluxe Cab - Front............................................................... $204

Available on the Deluxe Cab Optional kit which provides two front LED work lights


75-71310 KIT - LED Light - Deluxe Cab - Rear................................................................. $184

Available on the Deluxe Cab

450 Deluxe Cab

Optional kit which provides one Rear LED work light

Est. install time 1 - 2 hours (Reduced if installed at same time as cab)

Deluxe Cab All Prices in U.S. Dollars




Part Dealer Installed Cab Accessories - Order From Factory Number Description MSRP In US $

75-71223 Safety Beacon Light Kit ...................................................................................... $194

Available on the Deluxe Cab Optional kit that Increases visibility of the tractor in low light and low visibility situations


75-71224 Circulating Fan ................................................................................................... $135

Available on the Deluxe Cab Optional kit that helps circulate air to help keep the operator cool inside the cab


75-71225 Two Side Exterior Mirror Kit ........................................................................... $175

Available on the Deluxe Cab Optional kit that provides an exterior mirror on each side of the cab

Est. install time: 0.5 - 1 hour (Reduced if installed at same time as cab)

75-71226 Interior Mirror .................................................................................................... $75

Available on the Deluxe Cab Optional kit that provides a mirror inside of the cab

Est. install time: 0.5 - 1 hour (Reduced if installed at same time as cab)

450 Deluxe Cab


Deluxe Cab Steiner MSRP Price List

2020 Price Book


Page 12 of 39 MD Decks


Photo

MD448 61" (w/discharge chute)

47" 1" to 4 1/2"

Single "V" belt Tapered roller assemblies 3 blades, 16 1/4"

Side 10 x 3.5 semi-pneumatic

330 lbs


59 3/8" 1" to 4 1/2"

Single "V" belt Tapered roller assemblies

3 blades, 20 1/2" Side

10 x 3.5 semi-pneumatic 360 lbs


72" 1" to 4"


3 blades, 24 3/4" Side

10 x 3.5 semi-pneumatic 470 lbs

Drive:............................. Shaft to PTO Belt Shaft to PTO Belt Shaft to PTO Belt

Part Finish Mower Decks Number Description MSRP In US $

75-70855A MD448 - Mower Deck 48", Hi-Capacity................................................................. $3,010

Available on 430, 440, 450 and 450DX

Rotary finish mower with striping roller. High-velocity blade speed and channeled discharge chute provide even clipping distribution. Flips up 90° for easy access to blades and underside. Requires (4) rear weights if operating on a 430 tractor

Required PTO Belt:

Est. install time:

81-B041

2 hours


Available on 235, 430, 440, 450 and 450DX


Finish Mower Decks MD448 / MD460 / MD474

Quick Specs

Overall Width................ Cutting Width................ Cutting Height............... Spindle Drive................

Spindles......................... Blades............................ Discharge...................... Wheels...........................




Required PTO Belt:

Est. install time:

81-B041

2 hours








Required PTO Belt:

Est. install time:

81-B041

2 hours

Finish Mower Decks MD448 / MD460 / MD474


Page 14 of 39 MX Deck


Photo

Overall Width........................................... Cutting Width........................................... Cutting Height.......................................... Spindle Drive........................................... Spindles.................................................... Blades....................................................... Discharge................................................. Wheels...................................................... Weight - Rear Discharge.......................... Weight - Mulching option........................ Drive:........................................................


75-71002A MX460 - Rotary Mower 60"..................................................................................... $3,274


Deck ONLY. Choose between a rear discharge kit or a mulching kit. Flips up 90° for easy access to blades and underside. Requires 75-71025 or 75-71027. Requires (4) rear weights if operating on a 430 tractor

Required PTO Belt:

Est. install time:

81-B041

2 hours

Finish Mower Deck MX460

Quick Specs

MX460 60 3/4"

60" 1 1/2" to 4"


3 blades, 20 3/4" Rear

10.25 x 3.25 semi-pneumatic 380 lbs 400 lbs


Page 15 of 39 MX Deck


Part Required - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $

Must Choose One

75-71025 Mulching Kit.............................................................................................................. $417

Available on MX460 Only Closes off discharge chute and changes blades for mulch capabilities


75-71027 Rear Discharge Kit.................................................................................................... $314

Available on MX460 Only To adapt the deck to discharge clippings to the rear


Finish Mower Decks MX460

Deck Articulation:......................

Construction:..............................

Caster Wheels:............................

Blades:........................................ Side Discharge:........................... Weight....................

10 degrees up and down from horizontal, 20 degrees total per deck;

7-gauge steel top and skirts on center deck and 11-gauge on outer decks

5 front, 2 rear suspension wheels, 9 x 3.5 no-flat, semi-pneumatic tires with tapered roller bearings and greaseable hubs

High-lift blades standard, low-lift or mulching blades available Optional mulching kit available

760 lbs

Part Flex Deck Mower Number Description MSRP In US $

75-71305B FD800 - Flex Deck Mower - 80"............................................................................... $10,367

Available on 440, 450 (Not recommended on 25hp Diesel)

Mow uneven turf and undulating terrain without scalping and give level playing fields a smooth, professional cut. Great around sand traps, tee boxes and pond banks. Requires (4) rear weights

Required PTO Belt:

Est. install time:

4174756

2 - 3 hours

Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $

75-71313 KIT - Mulching Baffle............................................................................................... $94

Available on the Flex Deck Optional kit that closes off discharge chute and creates a mulching effect and rear


Flex Deck Mower FD800

Quick Specs

Overall Cutting Width:............... Transport Width:........................ Deck Configuration:................... Trim Side Deck:.........................

Spindles:.....................................

FD800 80"

70" (with trim side deck raised) cks with four 21" high-lift blades (1" overlap between decks)

20" offset with hydraulic lift Cast steel with sealed ball bearings

Photo

Flex Deck




Page 17 of 39 Rough Cut


Photo

RC720 73" (deck 76" with skids)

72" 3 3/4" - 6"

Shaft to PTO belt Cast-iron, sealed ball bearings

3 blades, 24" Rear discharge - flexible front and rear shields

2 skid shoes that allow deck to evenly cut all types of terrain without damaging the mower or the ground

430 lbs.

Part Rough Cut Mower Number Description MSRP In US $

75-71300 RC720 - Rough Cut Mower-72".............................................................................. $2,973

Available on 440, 450 and 450DX Tackles overgrown brush and bramble up to 1 1/2" in diameter. Requires (4) rear weights

Required PTO Belt:

Est. install time:

4169475

1.5 - 1 hour


75-71314 KIT - Caster Wheel...................................................................................................

Available on the Rough Cut Optional kit that mounts to the front of the Rough Cut to help stabilize the deck to prevent scalping.

$568


Rough Cut Mower RC720

Quick Specs

Overall width............................................ Cutting width............................................ Cutting height........................................... Drive.........................................................

Spindles.................................................... Blades....................................................... Discharge.................................................

Skid Shoe.................................................


Page 18 of 39 Rough Cut



75-71302 Counter Clockwise Blade Rotation Kit................................................................... $490

Available on the Rough Cut Optional kit for creating finer sizing of cut material


Rough Cut Mower RC720


Page 19 of 39 Tree Farm Mower


MC400 47" 44"

79" Including wheel shields 47"

2" to 5" Shaft to PTO Belt

Gearbox and 2 V-belts 2 blades 22.5"

Rear 0.25 x 3.25, Semi-pneumatic

272 lbs Shaft to PTO belt

Part Tree Farm Mower Number Description MSRP In US $

75-70805B MC400 - Tree Farm Mower 44".............................................................................. $4,320


Easily cut between rows of trees. Rear fenders standard on 450 and 450DX. For use on the 430, rear fenders must be purchased through parts. Requires (4) rear weights if operating on a 430 tractor

Required PTO Belt:

Est. install time:

4174756

2 hours

Tree Farm Mower MC400

Photo

Quick Specs

Mower Overall width............................................ Cutting Width........................................................ Overall Length....................................................... Rear Fender Width................................................

Cutting Height....................................................... Drive...................................................................... Spindle drive.......................................................... Blades.................................................................... Discharge............................................................... Caster Wheel ............................................................. 1 Weight (approx.)....................................................


Page 20 of 39 Snow Blower


Auger speed:................................................... Blower speed:................................................. Chute:.............................................................. Height of cut:.................................................. Weight:............................................................

140 RPM 700 RPM

Approximately 7" diameter, 223° rotation Adjustable skid shoes, 0" to 3/4"

450 lbs

Part Commercial Snow Blower Number Description MSRP In US $

75-71231 SB648 - 48" Professional Snow Blower................................................................... $4,337

Available on 430, 440, 450 and 450DX Quickly clear the heaviest snow in tough conditions. Works great for commercial or residential applications. (Belt and hose modifications necessary when operating on a 430 tractor)

Required PTO Belt:

Est. install time:

4165834

2 - 3 hours


75-71234A SB648 - Electric Chute Deflector............................................................................. $344

Available on SB648

Commercial Snow Blower SB648

Quick Specs

Overall width:................................................. Overall length:................................................ Opening size:.................................................. Serrated auger:................................................

Blower:............................................................ Width of cut: Standard..........................................................

SB648 48" 44"

27" high x 48" wide

16" diameter, open center 18" diameter, 4 blades, 7" depth

48"




Optional kit that allows the chute deflector to be operator from the operator's seat. Requires Front Power Outlet Kit






75-71235 SB648 - Drift Cutters (1 Set).................................................................................... $109

Available on SB648 Optional kit that helps to cut into snow banks that are taller than the auger.

Est. install time: 0.25 - 0.5 hours

75-71236 SB648 - Extension Wings (4" total, 2" side, 1 set)................................................. $222

Available on SB648 Optional kit that widens the swath of the snow blower from 48" to 52" (2" wider on each side)


Commercial Snow Blower SB648


Page 22 of 39 Snow Blowers


SB448 SB454 48"

270 lbs

21" H x 48" W, 21" H x 58" W 15"

14" diameter, 4 blades

54" 306 lbs

Solid steel 6" hydraulic chute with 237° rotation standard and optional electric chute deflection

3" adjustable heavy-duty skid shoes, 5/16" high-carbon steel w/ front slider 10-gauge steel 12-gauge steel

Double-layered 3/16" steel base 2 1/2" reversible, made of 1/4" high-carbon steel

Part Residential Snow Blower Number Description MSRP In US $

75-70666 SB448 - 48" Snow Blower-Hyd Chute..................................................................... $3,177

Available on 430, 440, 450 and 450DX 2-Stage Snow Blower, great for clearing snow for residential users

Required PTO Belt:

Est. install time:

4165834

1.5 - 2.5 hours

75-70667 SB454 - 54" Snow Blower-Hyd Chute..................................................................... $3,325

Available on 235, 430, 440, 450 and 450DX 2-Stage Snow Blower, great for clearing snow for residential users

Required PTO Belt:

Est. install time:

4165834

1.5 - 2.5 hours

Residential Snow Blowers SB448 / SB454

Quick Specs

Overall Width............................. Weight........................................ Opening Size.............................. Serrated Auger............................

Blower.........................................

Chute...........................................

Skid Shoes.................................. Side Panels.................................. Housing (Auger and Impeller) Base.............................................


Page 23 of 39 Snow Blowers



970400 SB448-454 Drift cutter Kit........................................................................................ $104

Available on SB448 & SB454 Optional kit that helps to cut into snow banks that are taller than the auger.


970401 SB448-454 Electric Chute Deflector........................................................................ $245

Available on SB448 & SB454 Optional kit that allows the chute deflector to be operator from the operator's seat.


970403 Integrated Drift Cutter, 4 in. Side Extension (Std on 970401).............................

Available on SB448 & SB454 Optional kit that helps to cut into snow banks that are taller than the auger.

$226


Part Optional - Dealer Installed Accessories - Order From Parts Number Description MSRP In US $

970415 Kit - Kick-Stand......................................................................................................... $

Available on SB448 & SB454 Optional kit that assists with hooking up to the tractor


Residential Snow Blowers SB448 / SB454


Page 24 of 39 Blowers


Overall width..................................... Overall height.................................... Overall length.................................... Skid shoe........................................... Fan..................................................... Fan diameter...................................... Fan width...........................................

PB200 27" 33" 67"

- - - -

PB100 33" 18" 24"

Fixed 8-blade, welded

14" 6"

Fan speed........................................... - 4300 rpm at 3600 rpm engine speed

Air flow............................................. Auger speed....................................... Wind Speed....................................... Wind speed (deflected to front)........

8000 cfm -

114 mph 78 mph

3000 cfm at max rpm 175 rpm

- -

Sound level (while in operator seat) 91 dBA

Weight............................................... 235 lbs.

-

95 lbs.

Weight on Casters............................. 195 lbs. -

Part Blowers Number Description MSRP In US $

75-70644B PB200 - Blower, Power Turbine.............................................................................. $5,133

Available on 235, 430, 440, 450 and 450DX Powerful axial-flow turbine design runs quietly and produces wind speeds of 114 MPH. Hydraulically rotate the nozzle 360°. Requires (4) rear weights if operating on a 430 tractor

Required PTO Belt:

Est. install time:

81-B041

0.5 - 1 hour

Blowers PB200 / PB100

Quick Specs


Page 24 of 39 Blowers


75-70642A PB100 - Blower, Power with Deflector.................................................................... $1,578

Available on 235, 430, 440, 450 and 450DX Powerful axial-flow turbine design runs quietly and produces wind speeds of 114

Required PTO Belt: 81-B041



Page 25 of 39 Slip Scoop


Part Slip Scoop Number Description MSRP In US $

75-70630A SS248 - Slip Scoop - Hydraulic, 48"........................................................................ $1,376


Easily move, lift or haul we and dry material. Also ideal for excavating small areas. Requires (4) rear weights if operating on a 430 tractor



78-043 Scarifier Wear Edge.................................................................................................. $

Available for SS248

Optional kit that assists with digging and scraping materials and will help protect the front edge of the bucket


Slip Scoop SS248

Photo

Quick Specs

Overall width.................................................. Overall height................................................. Overall length................................................. Width of bucket..............................................

Bucket capacity............................................... Dumping......................................................... Scarifier teeth..................................................

SS248 52" 16" 33"

48" 3 1/2 cubic ft.

Hydraulic 6 - 1" wide (optional)


Page 26 of 39 Dozer Blades


Photo

BD248 48" 36" 19" 32" 19"

170 lbs.

BD260 60" 48" 19" 32" 19"

195 lbs. 30°left and right

Adjustable Spring-loaded 3" hardened

3/8" x 4" through hardened steel 2" sawtooth edge

BD272 72" 60" 19" 32" 19"

213 lbs.

Part Dozer Blades Number Description MSRP In US $

75-70507 BD248 - Blade, Dozer 48" w/Power Angle Hitch ................................................. $1,365

Available on 235, 430, 440, 450 and 450DX Hydraulically angle the blade up to 30° left or right for efficient move material such as dirt or snow


75-70527 BD260 - Blade, Dozer 60" with Power Angle Hitch ............................................. $1,463

Available on 235, 430, 440, 450 and 450DX Hydraulically angle the blade up to 30° left or right for efficient move material such as dirt or snow


75-70547 BD272 - Blade, Dozer 72" w/Power Angle Hitch ................................................. $1,561

Dozer Blades BD248 / BD260 / BD272

Quick Specs

Blade width 30° Angled width........................ Overall height............................. Overall length.............................

Blade height from cutting edge.. Weight........................................ Hydraulic Angling...................... Skid shoe..................................... Forward tilt................................. Reversible cutting edge Scarifier teeth.............................




Available

on 235, 430, 440, 450 and 450DX Hydraulically angle the blade up to 30° left or right for efficient move material such as dirt or snow






75-70510 Gauge Wheel Kit........................................................................................................ $436

Available on BD Blades Optional adjustable gauge wheels (2) that help regulate the depth the blade will go


970420 Poly Blade Edge 48 in. Kit........................................................................................ $197

Available on BD248 Optional kit with a poly edge that helps decrease damage to the surface.


970421 Poly Blade Edge 60 in. Kit........................................................................................ $225



970422 Poly Blade Edge 72 in. Kit........................................................................................


$274



78-037.7 Heavy Duty Wear Edge............................................................................................. $

Available on BD248 Optional kit that helps increase the life of the edge of the blade

Dozer Blades BD248 / BD260 / BD272





78-038 Heavy Duty Wear Edge for BD260.......................................................................... $

Available on BD260 Optional kit that helps increase the life of the edge of the blade


78-040 Scarifier Wear Edge for BD260............................................................................... $




Available on BD260 Optional kit that helps break up compacted material and provides additional protection to the edge of the blade Est. install time: 0.5 - 1 hour


Page 29 of 39 V-Blade


BD358 69 1/4"

58" 49" 53"

Overall height........................................... Overall length........................................... Blade height from cutting edge...............

21" 31" 21"

Angling..................................................... 30° left and right, front and back Skid shoes................................................. Forward tilt............................................... Cutting edge, 2 position........................... Weight......................................................

Adjustable Spring-loaded

3/8" x 4" hardened 248 lbs.

Part V-Blade Number Description MSRP In US $

75-70550B BD358 - Blade, V-Blade............................................................................................ $2,926


Quickly move between 4 different angled positions to move snow quickly and efficiently. Requires Front Power Outlet Kit.


V-Blade BD358

Quick Specs

Overall width............................................ Cutting width - Straight................................................... - Scoop......................................................

Steiner MSRP Price List 2020 Prices Book

Page 30 of 39 Sweepers


RS454 62" 29" 44" 54" 24" 54" 30

265 rpm justable height (caster wheels) Variable-speed, hydraulic

475 lbs. Forward and reverse

Part Rotary Sweeper Number Description MSRP In US $

75-70587B RS454 - 54" Sweeper, Hydro Drive with reverse................................................... $5,002


Efficiently remove debris such as dirt, snow or grass from sidewalks, driveways and paved areas. Front power outlet kit required. Requires (4) rear weights

Required PTO Belt:

Est. install time:

81-B045

2.5 hours

75-70585B RS350 - 54" Rotary Sweeper.................................................................................... $3,048

Available on 235, 430, 440, 450 and 450DX Gauge Wheels now standard. Efficiently remove debris such as dirt, snow or grass from sidewalks, driveways and paved areas.

Required PTO Belt:

Est. install time:

81-B041

1.5 hours

Rotary Sweepers RS454 / RS350

Quick Specs

RS350 61" 18" 44"

54" 15" 54" 30

300 rpm @ 3200 engine rpm -

PTO - Gear Box 170 lbs.

Overall width..................................... Overall height.................................... Overall length.................................... Brush width.......................................

Brush diameter.................................. Working width................................... Hydraulic angling (Left or Right)..... Speed of brush................................... Ground clearance.............................. ad Drive.................................................. Weight...............................................


Page 31 of 39 Sweepers



75-70590

Gauge Wheel Option................................................................................................. $346

Available on RS350 Allows the operator to set ground height to bristles and follow the contour of the surface. (Standard on units with serial number ending with 2246 and above)


Rotary Sweepers RS454 / RS350


Page 32 of 39 Terra Rake


Tine Depth Adjustment Range Below Grade / Above Grade.................................

Tine Angle Adjustment Range.............................. Caster Wheel Height Adjustment......................... Weight....................................................................

4.25" / 4.50”

5

4.75” 382 lbs

Part Terra Rake Number Description MSRP In US $

75-70681 TR270 - Terra Rake.................................................................................................. $2,613

Available on 440, 450 and 450DX Rakes soil, landscape debris and aggregate.



75-71320 Kit - TR270 Hydraulic Top Link............................................................................. $452

Available for the Terra Rake Optional kit that allows the operator to make adjustments to the tine angle and tine depth from the operator's seat. (Requires Front or rear Power Outlet Kit)


Terra Rake TR270

Quick Specs

Overall Length With Wheels Front....................... Overall Length With Wheels Rear........................ Overall Height....................................................... Maximum Working Width....................................

Min Working Width (Angled)............................... Right & Left Rotation............................................

TR270 65" 48" 30"

70" 65" 20


Page 33 of 39 Terra Rake



75-71321 Kit - TR270 3-Point Adaptor.................................................................................... $258

Available for the Terra Rake

Optional kit that attaches to a (Cat-0 or Cat-1) 3-point hitch system to allow the TR270 to be utilized on the back of the tractor. (Requires Front/Rear Hydraulic Kit)

Est. install time: 1 hour (after 3 pt. hitch is installed)

Terra Rake TR270


Page 34 of 39 Aerator


Photo

Part Aerator Number Description MSRP In US $

75-70696A

AR240 - Aerator, Core (with 4 weights)................................................................. $1,976

Available on 235, 430, 440, 450 and 450DX Core aerator with independent 3/4" tine assemblies providing 6 1/2" by 7" coring pattern.


Aerator AR240

Quick Specs

Overall width.................................................. Working Width............................................... Overall height................................................. Overall length.................................................

Main shaft bearings........................................ Aerating wheels.............................................. Tines................................................................ Aerating width actual...................................... Aerating width effective................................. Aerating depth................................................ Aerating pattern..............................................

AR240 45 1/2" 40 1/4" 28 1/2"

30" Greasable 1 1/2"

7 steel with bushings/pressurized lubrication fitting 6 per wheel, 3/4" core tines

42" 48"

Up to 3 1/2" 6 1/2" x 7" (3.6 holes sq./ft.)


Page 35 of 39 Stump Cutter


Overall Width................................................................................... Overall Height.................................................................................. Overall Length.................................................................................. Cutterhead......................................................................................... Cutterhead Diameter......................................................................... Cutterhead Width.............................................................................. Cutterhead speed.............................................................................. Cutting depth below ground level.................................................... Max. recommended cutting height above ground level weight................................................................................................

Part Stump Cutter Number Description MSRP In US $

75-70895

SC101 - Stump Cutter............................................................................................... $3,181


16" diameter wheel powered by PTO belt driven off a right-angle gearbox. Carbide tipped cutters grind both side-to-side and from the top down

Required PTO Belt:

Est. install time:

81-B044

1 - 2 hours

Stump Cutter SC101

Quick Specs

SC101 34.5" 18" 37"

24 carbide teeth 16"

3.25" 1600 rpm

5" 5"


Page 36 of 39 Lawn Sweeper


Photo

LS340 62" 52" 82" 40"

3-paddle staggered Semi-pneumatic

Right, left or center pull 24 cu. ft. 530 lbs.

Part Lawn Sweeper Number Description MSRP In US $

75-70632A

LS340 - Lawn Sweeper ............................................................................................. $4,301


Collect, sweep and compact grass clippings or fallen leaves. Can be towed from the center or offset to the left or right. Can also be towed by most power units with a 2" receiver.


Lawn Sweeper LS340

Quick Specs

Overall width.................................................. Overall height................................................. Overall length to hitch.................................... Width of pickup..............................................

Brush............................................................... Depth wheels................................................... Hitch................................................................ Carrying capacity............................................


Page 37 of 39 Soil Tiller


Photo

Part Soil Tiller Number Description MSRP In US $

75-70890A TL348 - 48" Rototiller.................................................................................... $2,973

Available on 235, 430, 440, 450 and 450DX Till soil to a depth up to 6". Chain driven rotor is made with a solid 1 1/2" steel shaft and holds 24 cutting tines. Requires (4) rear weights if operating on a 430 tractor

Required PTO Belt:

Est. install time:

81-B041

0.5 - 1 hour

Soil Tiller TL348

Quick Specs

Working width................................................ Working depth................................................ Overall height................................................. Overall width..................................................

Overall length................................................. Tines................................................................ Drive................................................................ Operation........................................................ Bearings..........................................................

TL348 48"

6" maximum 26"

51" 38"

24 replaceable, hardened Chain from gearbox

Tractor in reverse motion Greasable


Page 38 of 39 Trencher


Photo

TH300 37" 5' 4" 34" 12"

550ft./minute 1 1/2"

28" 4 3/4" optional, 5 1/2" standard

395 lbs.

Part Trencher Number Description MSRP In US $

75-70920A

TH300 - Trencher...................................................................................................... $5,434

Available on 235, 430, 440, 450 and 450DX Cut trenches up to 28" in depth. 5-1/2" Chain Standard


Trencher TH300

Quick Specs

Overall width.................................................. Overall length................................................. Overall height................................................. Auger diameter...............................................

Chain speed..................................................... Drive shaft diameter....................................... Cutting depth.................................................. Cutting width..................................................


Page 39 of 39 North America Shipping All Prices in U.S. Dollars

Part Number 75-75025FT

Description 450-25 KDL FLD TRX ...................................................................

Freight Cost $310.00

75-75025BR 450-25 KDL BAR TIRE .................................................................. $310.00 75-75025TF 450-25 KDL TURF TIRE ................................................................ $310.00 75-75032FT 450-32 KGL FLD TRX ................................................................... $310.00 75-75032BR 450-32 KGL BAR TIRE .................................................................. $310.00 75-75032TF 450-32 KGL TURF TIRE ................................................................ $310.00 75-75037FT 450-37 HP EFI FLD TRX ............................................................... $310.00 75-75037BR 450-37 HP EFI BAR TIRE .............................................................. $310.00 75-75037TF 450-37 HP EFI TURF TIRE............................................................. $310.00 75-75125FT 450DX-25 HP VNGRD FLD TRX.................................................. $310.00 75-70865A MD472 - Mower Deck 72", Hi-Capacity......................................... $130.00 75-70860A MD460 - Mower Deck 60", Hi-Capacity......................................... $85.00 75-70855A MD448 - Mower Deck 48", Hi-Capacity......................................... $85.00 75-71002A MX460 - Rotary Mower 60"............................................................ $85.00 75-71305B FD800 - Flex Deck Mower - 80"...................................................... $130.00 75-71300 RC720 - Rough Cut Mower-72"....................................................... $130.00 75-70805B MC400 - Tree Farm Mower 44"....................................................... $85.00 75-70632A LS340 - Lawn Sweeper ................................................................... $130.00 75-70507 BD248 - Blade, Dozer 48" w/Power Angle Hitch ......................... $85.00 75-70527 BD260 - Blade, Dozer 60" with Power Angle Hitch ...................... $85.00 75-70547 BD272 - Blade, Dozer 72" w/Power Angle Hitch ......................... $85.00 75-70550B BD358 - Blade, V-Blade.................................................................. $85.00 75-71231 SB648 - 48" Professional Snow Blower........................................... $130.00 75-70667 SB454 - 54" Snow Blower-Hyd Chute............................................. $85.00 75-70666 SB448 - 48" Snow Blower-Hyd Chute............................................. $85.00 75-70585B RS350 - 54" Rotary Sweeper............................................................ $85.00 75-70587B RS454 - 54" Sweeper, Hydro Drive with reverse............................ $130.00 75-70642A PB100 - Blower, Power with Deflector............................................ $85.00 75-70644B PB200 - Blower, Power Turbine...................................................... $85.00 75-70681 TR270 - Terra Rake.......................................................................... $85.00 75-70630A SS248 - Slip Scoop - Hydraulic, 48"................................................ $85.00 75-70696A AR240 - Aerator, Core (with 4 weights).......................................... $85.00 75-70895 SC101 - Stump Cutter...................................................................... $85.00 75-70920A TH300 - Trencher............................................................................. $130.00 75-70890A TL348 - 48" Rototiller...................................................................... $85.00 75-71204 WB201 - Weight Kit......................................................................... $85.00 75-71215B All Weather Deluxe Cab Enclosure ............................................... $85.00 75-71200 DW200 - Dual Wheel Set - Field Trax............................................ $85.00 75-71201 DW201 - Dual Wheel Set - Bar Tread............................................. $85.00 75-71202 DW202 - Dual Wheel Set - Turf Tire.............................................. $85.00

For Shipments outside of North America, Please contact Customer Service for Freight Charges

North America Destination Charges

Municipal Tractors July, 2020 Discount off List Pricing ...

Documents

Transcript of Municipal Tractors July, 2020 Discount off List Pricing ...