multiSIM 7 - Sonoma State University...User Guide The User Guide describes Multisim 7 and its many...

698
multi SIM 7 Simulation & Capture Education User Guide

Transcript of multiSIM 7 - Sonoma State University...User Guide The User Guide describes Multisim 7 and its many...

  • multiSIM 7Simulation & Capture

    Education User Guide

  • Multisim and Electronics Workbench copyright 1989, 1992-2003 Interactive Image Technologies Ltd. All rights reserved.Some portions of this product are protected under United States Patent No. 6,560,572.

    All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

    MSM7-E-1790 Rev. 1

    2003 Interactive Image Technologies Ltd. All rights reserved. Published June 2003.Printed in Canada.

  • Preface

    Congratulations on choosing Multisim 7 from Electronics Workbench. We are confident that it will deliver years of increased productivity and superior designs.

    Electronics Workbench is the world’s leading supplier of circuit design tools. Our products are used by more customers than those of any other EDA vendor, so we are sure you will be pleased with the value delivered by Multisim 7, and by any other Electronics Workbench products you may select.

    Documentation Conventions

    When Multisim 7 manuals refer to a toolbar button, an image of the button appears in the left column.

    The manuals show circuits in black and white, although Multisim 7 is configured to use color by default. (You can change the color scheme.)

    Multisim 7 manuals use the convention Menu/Item to indicate menu commands. For example, “File/Open” means choose the Open command from the File menu.

    Multisim 7 manuals use the convention of an arrow (�) to indicate the start of procedural information.

    Multisim 7 manuals use the construction CTRL-KEY and ALT-KEY to indicate when you need to hold down the “Ctrl” or “Alt” key on your keyboard and press another key.

    The Multisim 7 Documentation Set

    Multisim 7 documentation consists of a Getting Started and Tutorial manual, this User Guide, and on-line help. All Multisim 7 users receive PDF versions of the Getting Started and Tutorial manual, the Component Reference Guide and the User Guide. Depending on your version of Multisim 7, you may also receive a printed version of the manuals.

    Getting Started and Tutorial The Getting Started and Tutorial manual introduces you to the Multisim 7 interface. It also offers an introductory tutorial that takes you through the stages of circuit design, simulation, analysis and reporting.

  • User Guide The User Guide describes Multisim 7 and its many functions in detail. The manual is organized based on the stages of circuit design, and explains all aspects of using Multisim 7, in detail.

    On-Line Help Multisim 7 offers a full help file system to support your use of the product. Choose Help/Multisim 7 Help to display the help file that explains the Multisim 7 program in detail, or choose Help/Multisim 7 Reference to display the help file that contains details on all the components families provided with Multisim 7. Both are standard Windows help files, offering a table of contents and index.

    In addition, you can display context-sensitive help by pressing F1 from any command or window, or by clicking the Help button on any dialog box that offers it.

    Adobe PDF Files The Getting Started and Tutorial Guide, the full User Guide and the Component Reference Guide, are provided on the Multisim 7 CD as Adobe PDF files and are accessible from the Multisim 7 program folder on the Windows Start menu. To open PDF files, you will need Adobe’s free Acrobat Reader program, available for download at www.adobe.com.

    License AgreementPlease read the license agreement included in the Multisim Getting Started and Tutorial Guide carefully before installing and using the software contained in this package. By installing and using the software, you are agreeing to be bound by the terms of this license. If you do not agree to the terms of this license, simply return the unused software within ten days to the place where you obtained it and your money will be refunded.

  • Table of Contents

    1. Introduction

    1.1 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

    1.2 What is Multisim 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

    1.3 About the Circuit Design Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

    1.4 Multisim 7 Features Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

    2. User Interface

    2.1 Introduction to the Multisim Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

    2.2 Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42.2.1 Standard Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52.2.2 Component Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-72.2.3 Virtual Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-92.2.4 Graphic Annotation Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-102.2.5 Instruments Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

    2.3 Menus and Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132.3.1 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

    2.3.1.1 File/New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132.3.1.2 File/Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132.3.1.3 File/Close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-142.3.1.4 File/Save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-142.3.1.5 File/Save As . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-142.3.1.6 File/New Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-142.3.1.7 File/Open Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-142.3.1.8 File/Save Project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-142.3.1.9 File/Close Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-152.3.1.10 File/Print Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-152.3.1.11 File/Print Circuit Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-162.3.1.12 File/Print Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-162.3.1.13 File/Print Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-162.3.1.14 File/Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-162.3.1.15 File/Recent Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-172.3.1.16 File/Recent Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

    Multisim 7 Education User Guide i

  • 2.3.1.17 File/Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-172.3.2 Edit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17

    2.3.2.1 Edit/Undo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-172.3.2.2 Edit/Redo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-172.3.2.3 Edit/Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-172.3.2.4 Edit/Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-172.3.2.5 Edit/Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-182.3.2.6 Edit/Paste Special . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-182.3.2.7 Edit/Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-182.3.2.8 Edit/Delete Multi-Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-182.3.2.9 Edit/Select All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-182.3.2.10 Edit/Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.2.11 Edit/Flip Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.2.12 Edit/Flip Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.2.13 Edit/90 Clockwise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.2.14 Edit/90 CounterCW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.2.15 Edit/Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-19

    2.3.3 View Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.3.1 View/Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192.3.3.2 View/ Show Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-202.3.3.3 View/Show Page Bounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.4 View/Show Title Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.5 View/Show Border . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.6 View/Show Ruler Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.7 View/Zoom In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.8 View/Zoom Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.9 View/Zoom Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.10 View/Zoom Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-212.3.3.11 View/Grapher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-222.3.3.12 View/Hierarchy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-222.3.3.13 View/Circuit Description Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22

    2.3.4 Place Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-222.3.4.1 Place/Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-222.3.4.2 Place/Junction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-222.3.4.3 Place/Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-222.3.4.4 Place/Bus Vector Connect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-232.3.4.5 Place/HB/SB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-232.3.4.6 Place/Hierarchical Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-232.3.4.7 Place/Create New Hierarchical Block . . . . . . . . . . . . . . . . . . . . . . .2-232.3.4.8 Place/Subcircuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-232.3.4.9 Place/Replace by Subcircuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-232.3.4.10 Place/Multi-Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23

    ii Electronics Workbench

  • 2.3.4.11 Place/Off-Page Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-242.3.4.12 Place/Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-242.3.4.13 Place/Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-242.3.4.14 Place/Title Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

    2.3.5 Simulate Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-252.3.5.1 Simulate/Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-252.3.5.2 Simulate/Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-252.3.5.3 Simulate/Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-252.3.5.4 Simulate/Default Instrument Settings . . . . . . . . . . . . . . . . . . . . . . . 2-282.3.5.5 Simulate/Digital Simulation Settings . . . . . . . . . . . . . . . . . . . . . . . . 2-282.3.5.6 Simulate/Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-282.3.5.7 Simulate/Postprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-312.3.5.8 Simulate/Simulation Error Log/Audit Trail . . . . . . . . . . . . . . . . . . . . 2-322.3.5.9 Simulate/XSpice Command Line Interface . . . . . . . . . . . . . . . . . . . 2-322.3.5.10 Simulate/VHDL Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-322.3.5.11 Simulate/Verilog HDL Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . 2-322.3.5.12 Simulate/Auto Fault Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-322.3.5.13 Simulate/Global Component Tolerances . . . . . . . . . . . . . . . . . . . . 2-32

    2.3.6 Transfer Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-332.3.6.1 Transfer/Transfer to Ultiboard V7 . . . . . . . . . . . . . . . . . . . . . . . . . . 2-332.3.6.2 Transfer/Transfer to Ultiboard 2001 . . . . . . . . . . . . . . . . . . . . . . . . 2-332.3.6.3 Transfer/Transfer to Other PCB Layout . . . . . . . . . . . . . . . . . . . . . 2-332.3.6.4 Transfer/Forward Annotation to Ultiboard V7 . . . . . . . . . . . . . . . . . 2-332.3.6.5 Transfer/Backannotate from Ultiboard . . . . . . . . . . . . . . . . . . . . . . 2-332.3.6.6 Transfer/Highlight Selection in Ultiboard V7 . . . . . . . . . . . . . . . . . . 2-342.3.6.7 Transfer/Export Simulation Results to MathCAD . . . . . . . . . . . . . . 2-342.3.6.8 Transfer/Export Simulation Results to Excel. . . . . . . . . . . . . . . . . . 2-342.3.6.9 Transfer/Export Netlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34

    2.3.7 Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-342.3.7.1 Tools/Component Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-342.3.7.2 Tools/Symbol Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.3 Tools/Database Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.4 Tools/555 Timer Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.5 Tools/Filter Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.6 Tools/Electrical Rules Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.7 Tools/Renumber Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.8 Tools/Replace Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-352.3.7.9 Tools/Update HB/SB Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-362.3.7.10 Tools/Convert V6 Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-362.3.7.11 Tools/Modify Title Block Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-362.3.7.12 Tools/Title Block Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-362.3.7.13 Tools/Internet Design Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

    Multisim 7 Education User Guide iii

  • 2.3.7.14 Tools/EDAparts.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-362.3.7.15 Tools/Go to Education Webpage. . . . . . . . . . . . . . . . . . . . . . . . . . .2-37

    2.3.8 Reports Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-372.3.8.1 Reports/Bill of Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-372.3.8.2 Reports/Component Detail Report. . . . . . . . . . . . . . . . . . . . . . . . . .2-372.3.8.3 Reports/Netlist Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-372.3.8.4 Reports/Schematic Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-372.3.8.5 Reports/Spare Gates Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-372.3.8.6 Reports/Cross Reference Report . . . . . . . . . . . . . . . . . . . . . . . . . .2-37

    2.3.9 Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-382.3.9.1 Options/Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-382.3.9.2 Options/Customize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-382.3.9.3 Options/Global Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-382.3.9.4 Options/Circuit Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-382.3.9.5 Options/Simplified Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-38

    2.3.10 Window Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-382.3.10.1 Window/Cascade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.10.2 Window/Tile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.10.3 Window/Arrange Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.10.4 Window (open files) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-39

    2.3.11 Help Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.11.1 Help/Multisim 7 Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.11.2 Help/Multisim 7 Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.11.3 Help/Release Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-392.3.11.4 Help/About Multisim 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40

    2.4 Setting Schematic Capture Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-402.4.1 About Setting Schematic Capture Preferences . . . . . . . . . . . . . . . . . . . . . . .2-402.4.2 Using the Preferences Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-402.4.3 Circuit Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-422.4.4 Workspace Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-432.4.5 Wiring Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-442.4.6 Component Bin Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-452.4.7 Font Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-462.4.8 Miscellaneous Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-482.4.9 Rule Check Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-482.4.10 PCB Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52

    2.5 Customizing the Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-522.5.1 Commands tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-532.5.2 Toolbars tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-542.5.3 Keyboard tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-552.5.4 Menu tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-56

    iv Electronics Workbench

  • 2.5.5 Options tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-572.5.6 Customization Pop-up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-572.5.7 Other Customization Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58

    3. Schematic Capture - Basics

    3.1 Introduction to Schematic Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

    3.2 Setting up Your Circuit Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23.2.1 Setting up a Sheet Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33.2.2 Displaying or Hiding Workspace Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43.2.3 Selecting a Symbol Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43.2.4 Selecting a Circuit Color Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53.2.5 Selecting Fonts for Labels, Values and Names . . . . . . . . . . . . . . . . . . . . . . . . 3-5

    3.3 Working with Multiple Circuit Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

    3.4 Selecting Components from the Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

    3.5 Placing Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63.5.1 Using the place component browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

    3.5.1.1 Other buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-103.5.2 Placing Virtual Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

    3.5.2.1 Virtual component toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-113.5.3 Using the In Use List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-143.5.4 Moving a Placed Component. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-143.5.5 Copying a Placed Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-153.5.6 Replacing a Placed Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-163.5.7 Controlling Component Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

    3.6 Wiring Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-183.6.1 Wiring Components Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-183.6.2 Wiring Components Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-203.6.3 Combining Automatic and Manual Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-213.6.4 Setting Wiring Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-213.6.5 Modifying the Wire Path. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-223.6.6 Controlling Wire Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-233.6.7 Moving a Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

    3.7 Manually Adding a Junction (Connector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

    3.8 Rotating/Flipping Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

    3.9 Finding Components in Your Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26

    Multisim 7 Education User Guide v

  • 3.10 Labelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-273.10.1 Modifying Component Labels and Attributes . . . . . . . . . . . . . . . . . . . . . . . . .3-273.10.2 Modifying Node Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-283.10.3 Adding a Title Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29

    3.10.3.1 Entering the Title Block Contents . . . . . . . . . . . . . . . . . . . . . . . . . .3-303.10.4 Adding Miscellaneous Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-323.10.5 Adding a Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-333.10.6 Graphic Annotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34

    3.11 Printing the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36

    4. Schematic Capture - Advanced Functions

    4.1 Placed Component Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24.1.1 Displaying Identifying Information about a Placed Component . . . . . . . . . . . .4-34.1.2 Viewing a Placed Component’s Value/Model . . . . . . . . . . . . . . . . . . . . . . . . .4-4

    4.1.2.1 Real Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-54.1.2.2 Edit Model Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-64.1.2.3 Edit Footprint Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-74.1.2.4 Virtual Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8

    4.1.3 Controlling How a Placed Component is Used in Analyses . . . . . . . . . . . . . . .4-8

    4.2 Using the Pop-up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-104.2.1 Pop-up From Circuit Window, with no Component Selected . . . . . . . . . . . . .4-104.2.2 Pop-up From a Selected Component or Instrument . . . . . . . . . . . . . . . . . . .4-124.2.3 Pop-up From a Selected Wire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-134.2.4 Pop-up From a Selected Text Block or Graphic . . . . . . . . . . . . . . . . . . . . . . .4-134.2.5 Pop-up From a Title Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14

    4.3 The Spreadsheet View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-154.3.1 Spreadsheet View Components Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-154.3.2 Spreadsheet View Nets Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-184.3.3 Spreadsheet View PCB Layers Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21

    4.4 Title Block Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-234.4.1 Title Block Editor Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-25

    4.4.1.1 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-254.4.1.2 Edit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-264.4.1.3 View Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-274.4.1.4 Fields Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-284.4.1.5 Graphics Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-294.4.1.6 Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-30

    vi Electronics Workbench

  • 4.4.1.7 Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-314.4.1.8 Pop-up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

    4.4.2 Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-314.4.2.1 Standard Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-314.4.2.2 Zoom Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-334.4.2.3 Draw Tools Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-344.4.2.4 Drawing Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35

    4.4.3 Title Block Editor Spreadsheet View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-374.4.4 Enter Text Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-384.4.5 Placing Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

    4.4.5.1 Field Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

    4.5 Placing a Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-424.5.1 Connecting HB Connectors to a Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-444.5.2 Moving Connected Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45

    4.6 Bus Vector Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45

    4.7 Virtual Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50

    4.8 Electrical Rules Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50

    4.9 Project Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-524.9.1 Setting up Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-524.9.2 Working with Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-544.9.3 Working with Files Contained in Projects. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55

    4.10 Subcircuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-564.10.1 Subcircuits vs. Hierarchical Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-564.10.2 Setting up a Circuit for Use as a Subcircuit . . . . . . . . . . . . . . . . . . . . . . . . . . 4-574.10.3 Adding Subcircuits to a Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-584.10.4 Replacing Components with a Subcircuit . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60

    4.11 Hierarchical Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-604.11.1 About Hierarchical Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-604.11.2 Setting up and Using Hierarchical Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-614.11.3 Creating a New Hierarchical Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62

    4.12 Flat Multi-sheet Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-634.12.1 Delete Multi-page Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-64

    5. Components

    5.1 Structure of the Component Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

    Multisim 7 Education User Guide vii

  • 5.1.1 Database Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-25.1.2 Classification of Components in the Database . . . . . . . . . . . . . . . . . . . . . . . . .5-3

    5.2 Locating Components in the Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-35.2.1 Browsing for Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-35.2.2 Searching for Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3

    5.3 Using EDAparts.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-65.3.1 Locating and Downloading Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

    5.3.1.1 Locating Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-65.3.1.2 Downloading Components Using Edaparts.com . . . . . . . . . . . . . . . .5-9

    5.3.2 Updating your Multisim Master Database . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-105.3.3 Finding, Buying and Requesting Quotes for Parts . . . . . . . . . . . . . . . . . . . . .5-12

    5.4 Types of Information Stored for Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-125.4.1 Pre-Defined Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12

    5.4.1.1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-125.4.2 User Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13

    5.5 Component Nominal Values and Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13

    5.6 Managing the Database. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-145.6.1 Managing Families . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-165.6.2 Modifying User Field Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-175.6.3 Removing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-185.6.4 Copying Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-195.6.5 Editing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19

    5.7 Convert V6 Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19

    6. Component Editing

    6.1 Introduction to Component Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

    6.2 Adding Components with the Create Component Wizard . . . . . . . . . . . . . . . . . . . . . .6-3

    6.3 Editing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11

    6.4 Editing a Component’s General Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-15

    6.5 Editing a Component’s Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-156.5.1 Copying a Component’s Symbol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-16

    6.5.1.1 Using “Copy To...” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-176.5.2 Creating and Editing a Component’s Symbol with the Symbol Editor . . . . . .6-18

    6.5.2.1 Symbol Editor Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-19

    viii Electronics Workbench

  • 6.5.2.2 Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-256.5.2.3 Symbol Editor Spreadsheet View . . . . . . . . . . . . . . . . . . . . . . . . . . 6-306.5.2.4 Working with the Symbol Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-336.5.2.5 Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-336.5.2.6 Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-336.5.2.7 Enter Text Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-376.5.2.8 In-Place Edit Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-38

    6.6 Editing a Component’s Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-386.6.1 Creating a Model for a Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-40

    6.6.1.1 Component List Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-426.6.2 Loading an Existing Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-436.6.3 Modify a Model’s Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-436.6.4 Copying the Model of One Component to Another . . . . . . . . . . . . . . . . . . . . 6-44

    6.7 Editing a Component Pin Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-45

    6.8 Editing a Component’s Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-466.8.1 Select a Footprint dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-476.8.2 Add a Footprint dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49

    6.9 Editing a Component’s Electronic Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50

    6.10 Editing User Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-51

    6.11 Creating a Component Model Using the Model Makers . . . . . . . . . . . . . . . . . . . . . . 6-526.11.1 BJT Model Maker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-536.11.2 Diode Model Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-676.11.3 MOSFET (Field Effect Transistor) Model Maker . . . . . . . . . . . . . . . . . . . . . . 6-716.11.4 Operational Amplifier Model Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-806.11.5 Silicon Controlled Rectifier Model Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-866.11.6 Zener Model Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-90

    6.12 Creating a Model Using Code Modeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-946.12.1 What is Code Modeling? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-956.12.2 Creating a Code Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-956.12.3 The Interface File (Ifspec.ifs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-96

    6.12.3.1 Name Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-966.12.3.2 Port Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-986.12.3.3 Parameter Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-996.12.3.4 Example Interface File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-101

    6.12.4 The Implementation File (Cfunc.mod) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1026.12.4.1 Implementation File C Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1036.12.4.2 Example Implementation File . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1116.12.4.3 Additional Example ifspec File . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-113

    Multisim 7 Education User Guide ix

  • 7. Simulation

    7.1 Introduction to Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-27.1.1 What Type of Simulation Should I Use? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-27.1.2 What Kind of Simulation Does Multisim Support? . . . . . . . . . . . . . . . . . . . . . .7-3

    7.2 Using Multisim Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-47.2.1 Simulating Circuits with Digital Components . . . . . . . . . . . . . . . . . . . . . . . . . .7-47.2.2 Start/Stop/Pause Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5

    7.2.2.1 Simulation Running Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-57.2.3 Interactive Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-57.2.4 Circuit Consistency Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-67.2.5 Miscellaneous SPICE Simulation Capabilities . . . . . . . . . . . . . . . . . . . . . . . . .7-6

    7.2.5.1 Component Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-67.2.5.2 Menu-Driven Simulation from Netlist Without Schematic . . . . . . . . .7-6

    7.3 Multisim SPICE Simulation: Technical Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-77.3.1 BSpice/XSpice Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-77.3.2 Circuit Simulation Mechanism. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-87.3.3 Four Stages of Circuit Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-87.3.4 Equation Formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-97.3.5 Equation Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-97.3.6 Numerical Integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-107.3.7 User Setting: Maximum Integration Order . . . . . . . . . . . . . . . . . . . . . . . . . . .7-127.3.8 Convergence Assistance Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12

    7.3.8.1 Gmin Stepping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-127.3.8.2 Source Stepping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-13

    7.4 RF Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-13

    7.5 HDLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-137.5.1 Using HDL Models Without the Need to Write HDL Code . . . . . . . . . . . . . . .7-147.5.2 Using Multisim to Write/Debug HDL Code . . . . . . . . . . . . . . . . . . . . . . . . . . .7-15

    7.5.2.1 Using Multisim with Programmable Logic . . . . . . . . . . . . . . . . . . . .7-157.5.2.2 Using Multisim to Model Complex Digital IC . . . . . . . . . . . . . . . . . .7-16

    7.5.3 Introduction to VHDL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-167.5.4 Introduction to Verilog HDL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-18

    7.6 555 Timer Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-19

    7.7 Filter Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-23

    7.8 Viewing the Analysis Results: Simulation Error Log/Audit Trail . . . . . . . . . . . . . . . . .7-24

    7.9 Simulation Adviser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-26

    x Electronics Workbench

  • 8. Instruments

    8.1 Introduction to the Multisim Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-38.1.1 Adding an Instrument to a Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-48.1.2 Using the Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

    8.1.2.1 Simulation Running Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-68.1.3 Working with Multiple Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

    8.2 Printing Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-78.2.1 Print Instruments Dialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

    8.3 Default Instrument Analysis Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-78.3.1 Troubleshooting Simulation Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

    8.4 Multimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-98.4.1 Using the Multimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

    8.4.1.1 Multimeter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

    8.5 Function Generator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-148.5.1 Using the Function Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

    8.5.1.1 Function Generator Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

    8.6 Wattmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-168.6.1 Using the Wattmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17

    8.6.1.1 Connecting the Wattmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17

    8.7 Oscilloscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-178.7.1 Using the Oscilloscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

    8.7.1.1 Oscilloscope Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-198.7.1.2 Viewing Oscilloscope Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22

    8.8 Bode Plotter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-228.8.1 Using the Bode Plotter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24

    8.8.1.1 Bode Plotter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-248.8.1.2 Viewing Bode Plotter Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26

    8.9 Word Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-278.9.1 Using the Word Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28

    8.9.1.1 Word Generator Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28

    8.10 Logic Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-308.10.1 Using the Logic Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32

    8.10.1.1 Logic Analyzer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32

    8.11 Logic Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-358.11.1 Using the Logic Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-36

    8.11.1.1 Logic Converter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-36

    Multisim 7 Education User Guide xi

  • 8.12 Distortion Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-388.12.1 Using the Distortion Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-39

    8.12.1.1 Distortion Analyzer Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-39

    8.13 Spectrum Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-39

    8.14 Network Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-40

    8.15 Dynamic Measurement Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-408.15.1 Using the Dynamic Measurement Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-40

    8.15.1.1 Dynamic Measurement Probe Settings . . . . . . . . . . . . . . . . . . . . . .8-408.15.1.2 Viewing Dynamic Measurement Probe Results. . . . . . . . . . . . . . . .8-418.15.1.3 Connecting the Dynamic Measurement Probe . . . . . . . . . . . . . . . .8-42

    8.16 Four-channel Oscilloscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-438.16.1 Using the Four-channel Oscilloscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-44

    8.16.1.1 Four-channel Oscilloscope Settings . . . . . . . . . . . . . . . . . . . . . . . .8-448.16.1.2 Viewing Four-channel Oscilloscope Results . . . . . . . . . . . . . . . . . .8-488.16.1.3 Connecting the Four-channel Oscilloscope . . . . . . . . . . . . . . . . . . .8-51

    8.17 Frequency Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-538.17.1 Using the Frequency Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-53

    8.18 IV Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-568.18.1 Using the IV Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-57

    8.18.1.1 Simulate Parameters Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . .8-598.18.2 Reviewing IV Analyzer Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-63

    8.19 Agilent Simulated Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-668.19.1 Agilent Simulated Function Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-67

    8.19.1.1 Supported Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-678.19.1.2 Features Not Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-688.19.1.3 Using the Agilent Function Generator . . . . . . . . . . . . . . . . . . . . . . .8-69

    8.19.2 Agilent Simulated Multimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-708.19.2.1 Supported Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-708.19.2.2 Features Not Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-718.19.2.3 Using the Agilent Multimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-72

    8.19.3 Agilent Simulated Oscilloscope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-738.19.3.1 Supported Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-738.19.3.2 Features Not Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-768.19.3.3 Using the Agilent Oscilloscope . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-77

    8.20 Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-788.20.1 Using the Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-78

    8.20.1.1 Resistance (1.0 W - 999.99 TW) . . . . . . . . . . . . . . . . . . . . . . . . . . .8-788.20.1.2 Mode (DC or AC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-78

    xii Electronics Workbench

  • 8.20.1.3 Connecting a Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-79

    8.21 Ammeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-798.21.1 Using the Ammeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-79

    8.21.1.1 Resistance (1.0 pW - 999.99 W). . . . . . . . . . . . . . . . . . . . . . . . . . . 8-798.21.1.2 Mode (DC or AC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-808.21.1.3 Connecting an Ammeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-80

    9. Analyses

    9.1 Introduction to Multisim Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

    9.2 Viewing the Analysis Results: Grapher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-49.2.1 Working with Pages on the Grapher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-79.2.2 Working with Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8

    9.2.2.1 Grids and Legends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-89.2.2.2 Cursors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-99.2.2.3 Cursor Pop-up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-109.2.2.4 Zoom and Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-119.2.2.5 Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-139.2.2.6 Axes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-149.2.2.7 Traces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-159.2.2.8 Merging Traces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

    9.2.3 Viewing Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-179.2.4 Cut, Copy and Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-179.2.5 Print and Print Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18

    9.3 Working with Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-199.3.1 General Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-209.3.2 The Analysis Parameters Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-209.3.3 The Output Variables Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21

    9.3.3.1 Choosing How Output Variables are to be Handled . . . . . . . . . . . . 9-229.3.3.2 Filtering the Variable Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-229.3.3.3 Adding Parameters to the Variable List. . . . . . . . . . . . . . . . . . . . . . 9-23

    9.3.4 The Miscellaneous Options Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-249.3.5 The Summary Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-269.3.6 Incomplete Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-27

    9.4 DC Operating Point Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-279.4.1 About the DC Operating Point Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-279.4.2 Setting up and Running DC Operating Point Analysis. . . . . . . . . . . . . . . . . . 9-28

    9.4.2.1 Setting DC Operating Point Analysis Parameters. . . . . . . . . . . . . . 9-28

    Multisim 7 Education User Guide xiii

  • 9.4.3 Sample Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-289.4.4 Troubleshooting DC Operating Point Analysis Failures . . . . . . . . . . . . . . . . .9-29

    9.4.4.1 Circuit failure example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-309.4.4.2 Trouble-shooting Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-31

    9.5 AC Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-329.5.1 About the AC Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-329.5.2 Setting AC Analysis Frequency Parameters. . . . . . . . . . . . . . . . . . . . . . . . . .9-32

    9.6 Transient Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-349.6.1 About the Transient Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-349.6.2 Setting Transient Analysis Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-359.6.3 Troubleshooting Transient Analysis Failures . . . . . . . . . . . . . . . . . . . . . . . . .9-37

    9.7 Fourier Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-389.7.1 About the Fourier Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-389.7.2 Setting Fourier Analysis Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-39

    9.8 Noise Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-419.8.1 About the Noise Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-419.8.2 Setting Noise Analysis Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-439.8.3 Noise Analysis Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-46

    9.9 Distortion Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-499.9.1 Multisim Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-509.9.2 Preparing the Circuit for Distortion Analysis . . . . . . . . . . . . . . . . . . . . . . . . . .9-509.9.3 Understanding the Distortion Analysis Options. . . . . . . . . . . . . . . . . . . . . . . .9-509.9.4 Distortion Analysis for Harmonic Distortion. . . . . . . . . . . . . . . . . . . . . . . . . . .9-529.9.5 Distortion Analysis for Intermodulation Distortion . . . . . . . . . . . . . . . . . . . . . .9-54

    9.10 DC Sweep Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-569.10.1 Setting DC Sweep Analysis Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-579.10.2 DC Sweep Analysis Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-58

    9.11 DC and AC Sensitivity Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-639.11.1 Multisim Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-639.11.2 Setting Up and Running Sensitivity Analysis . . . . . . . . . . . . . . . . . . . . . . . . .9-65

    9.11.2.1 Example 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-659.11.2.2 Example 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-68

    9.12 Parameter Sweep Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-699.12.1 About the Parameter Sweep Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-699.12.2 Setting Parameter Sweep Analysis Parameters . . . . . . . . . . . . . . . . . . . . . . .9-709.12.3 Parameter Sweep Analysis – Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-72

    9.13 Temperature Sweep Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-77

    xiv Electronics Workbench

  • 9.13.1 About the Temperature Sweep Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-779.13.2 Setting Temperature Sweep Analysis Parameters. . . . . . . . . . . . . . . . . . . . . 9-79

    9.14 Transfer Function Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-819.14.1 About the Transfer Function Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-819.14.2 Setting Transfer Function Analysis Parameters. . . . . . . . . . . . . . . . . . . . . . . 9-829.14.3 Examples of Transfer Function Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-83

    9.14.3.1 Linear Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-839.14.3.2 Non-linear Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-85

    9.15 Worst Case Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-889.15.1 About the Worst Case Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-88

    9.15.1.1 Setting Tolerance Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-899.15.2 Setting Analysis Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-919.15.3 Worst Case Analysis Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-92

    9.16 Pole Zero Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-959.16.1 About the Pole Zero Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-95

    9.16.1.1 Multisim Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-989.16.2 Setting Pole Zero Analysis Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-989.16.3 Running Pole Zero Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-100

    9.17 Monte Carlo Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1029.17.1 About the Monte Carlo Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-102

    9.17.1.1 Uniform Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1029.17.1.2 Gaussian Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-103

    9.17.2 Setting Up and Running Monte Carlo Analysis . . . . . . . . . . . . . . . . . . . . . . 9-1059.17.2.1 Entering a Component Tolerance. . . . . . . . . . . . . . . . . . . . . . . . . 9-1059.17.2.2 Specifying the Analysis Parameters . . . . . . . . . . . . . . . . . . . . . . . 9-106

    9.17.3 Monte Carlo Analysis Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1089.17.3.1 Setting up the Sample Monte Carlo Analysis . . . . . . . . . . . . . . . . 9-1089.17.3.2 Simulation Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-111

    9.18 Trace Width Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1159.18.1 Multisim Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1169.18.2 Sample Trace Width Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-118

    9.19 RF Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-122

    9.20 Nested Sweep Analyses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-122

    9.21 Batched Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-124

    9.22 User Defined Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1259.22.1 About the User Defined Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1259.22.2 Creating and Simulating a SPICE Netlist. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-126

    Multisim 7 Education User Guide xv

  • 9.22.3 Importing the SPICE netlist into Multisim . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1289.22.4 Plotting Two Nodes Using the Tran Statement. . . . . . . . . . . . . . . . . . . . . . .9-1299.22.5 How to Run an AC Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1309.22.6 Importing Multisim 2001 circuits into Multisim 7 . . . . . . . . . . . . . . . . . . . . . .9-131

    9.23 Analysis Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-132

    10. Postprocessor

    10.1 Introduction to the Postprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2

    10.2 Using the Postprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-210.2.1 Basic Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2

    10.2.1.1 Using the Default Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-710.2.1.2 Creating Multiple Traces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-8

    10.2.2 Working with Pages, Traces, Graphs and Charts. . . . . . . . . . . . . . . . . . . . . .10-8

    10.3 Postprocessor Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-9

    10.4 Available Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-9

    11. Transfer/Communication

    11.1 Introduction to Transfer/Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-1

    11.2 Exporting to PCB layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-211.2.1 Transferring from Multisim to Ultiboard for PCB Layout . . . . . . . . . . . . . . . .11-211.2.2 Transferring to Other PCB Layout Packages . . . . . . . . . . . . . . . . . . . . . . . . .11-311.2.3 Multisection Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-3

    11.3 Forward Annotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-4

    11.4 Back Annotation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-4

    11.5 Exporting Simulation Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-411.5.1 Exporting to MathCAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-411.5.2 Exporting to Excel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-5

    11.6 Exporting a Netlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-6

    11.7 Importing Files with Other Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-611.7.1 Importing a SPICE or PSPICE Netlist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-6

    xvi Electronics Workbench

  • 12. Reports

    12.1 Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-112.1.1 Using the BOM Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3

    12.2 Component Detail Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-512.2.1 Using the Component Detail Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6

    12.3 Netlist Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-812.3.1 Using the Netlist Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-9

    12.4 Schematic Statistics Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1012.4.1 Using the Schematic Statistics Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-11

    12.5 Spare Gates Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1112.5.1 Using the Spare Gates Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-12

    12.6 Model Data Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1212.6.1 Using the Model Data Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13

    12.7 Cross Reference Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1412.7.1 Using the Cross Reference Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14

    13. RF

    13.1 Introduction to the Multisim RF Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2

    13.2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-213.2.1 About RF Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-213.2.2 Multisim’s RF Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-313.2.3 Theoretical Explanation of the RF Models . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-4

    13.2.3.1 Striplines/Microstrips/Waveguides . . . . . . . . . . . . . . . . . . . . . . . . . 13-413.2.3.2 RF Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-613.2.3.3 RF Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-613.2.3.4 RF Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-713.2.3.5 Active Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7

    13.3 RF Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-913.3.1 Spectrum Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-9

    13.3.1.1 About the Spectrum Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-913.3.1.2 Using Multisim’s Spectrum Analyzer. . . . . . . . . . . . . . . . . . . . . . . . 13-913.3.1.3 Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1013.3.1.4 Frequency Spans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1013.3.1.5 Frequency Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-11

    Multisim 7 Education User Guide xvii

  • 13.3.1.6 Amplitude Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1213.3.1.7 Reference Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1213.3.1.8 Frequency Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1313.3.1.9 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-13

    13.3.2 Network Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1513.3.2.1 About the Network Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1513.3.2.2 Using the Network Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1613.3.2.3 Marker Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1713.3.2.4 Trace Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1713.3.2.5 Format Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1813.3.2.6 Data Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1813.3.2.7 Mode Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-18

    13.4 RF Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1913.4.1 RF Characterizer Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1913.4.2 Matching Network Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-2113.4.3 Noise Figure Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-25

    13.4.3.1 Multisim Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-2813.4.3.2 Noise Figure Analysis Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-2813.4.3.3 Sample Noise Figure Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . .13-30

    13.5 RF Model Makers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3113.5.1 Waveguide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3213.5.2 Microstrip Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3313.5.3 Open End Microstrip Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3413.5.4 RF Spiral Inductor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3513.5.5 Strip Line Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3613.5.6 Stripline Bend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3713.5.7 Lossy Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-3813.5.8 Interdigital Capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-40

    13.6 Tutorial: Designing RF Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-4113.6.1 Selecting Type of RF Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-4213.6.2 Selecting an RF Transistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-4213.6.3 Selecting a DC-operating Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-4313.6.4 Selecting the Biasing Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-43

    13.6.4.1 Selecting an Operating Frequency Point . . . . . . . . . . . . . . . . . . . .13-4513.6.4.2 Analyzing the RF Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-45

    xviii Electronics Workbench

  • 14. Educator’s Guide

    14.1 New educational features for Multisim 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-214.1.1 Behavior of circuits with Education-only-version functions in Student version14-3

    14.2 Circuit Creator’s Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-4

    14.3 Assigning Faults to Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-414.3.1 Setting a Placed Component’s Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-414.3.2 Using the Auto Fault Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-6

    14.4 Using Restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-614.4.1 Setting Global Restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-7

    14.4.1.1 General Global Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-714.4.1.2 Simplified Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-914.4.1.3 Global Analyses Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-10

    14.4.2 Setting Circuit Restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1114.4.3 Setting Passwords for Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-14

    14.5 Internet Design Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15

    14.6 Link to Education Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15

    Multisim 7 Education User Guide xix

  • xx Electronics Workbench

  • Introduction

    Chapter 1Introduction

    This chapter briefly introduces you to this manual and to Multisim 7. It also provides a summary of Multisim’s features and advises you in which editions they are available.

    The following are described in this chapter.

    1.1 About this ManualThis manual is written for all Multisim 7 users. It explains, in detail, all aspects of the Multisim 7 product.

    Tip We strongly encourage you to read chapter 2 of this manual (User Interface). It is not just for the novice user, but very important for anyone who wants to get the most out of Multisim 7 for their specific needs.

    This manual assumes that you are familiar with Windows applications and know how, for example, to choose a menu from a command, use the mouse to select an item, and enable/disable an option box. If you are new to Windows, see your Windows documentation for help.

    Subject Page No.

    About this Manual 1-1

    What is Multisim 7 1-2

    About the Circuit Design Process 1-2

    Multisim 7 Features Summary 1-3

    Multisim 7 Education User Guide 1-1

  • Introduction

    Intr

    oduc

    tion

    1.2 What is Multisim 7 Multisim 7 incorporates advanced schematic capture capabilities, integrated with full analog/digital SPICE simulation and seamless transfer to PCB layout packages such as Ultiboard 7, also from Electronics Workbench. It offers a single, easy-to-use graphical interface for all your design and analysis needs.

    1.3 About the Circuit Design ProcessMultisim 7 supports every step of the overall circuit design process, which typically includes the following phases:

    1. Entering the design (using schematic capture, behavioral language formats or other methods) into the software tool being used.

    2. Verifying that the behavior of the circuit matches expectations. This step is performed using simulation.

    3. Modifying the circuit design if the behavior does not meet expectations, and returning to step 2 as often as necessary.

    4. Depending on how the circuit is to be physically implemented, passing the design through the appropriate process. For example, if it is to be placed on a PCB, the next step is to use a PCB layout program such as Electronics Workbench’s Ultiboard product. If it is to be placed on a programmable logic device (PLD, CPLD, FPGA, etc.), the next step is to use a synthesis tool.

    1-2 Electronics Workbench

  • Multisim 7 Features Summary

    Introduction

    1.4 Multisim 7 Features SummaryMultisim 7 is available in three versions for the educational community: Education, Lab and Student.

    The Education version is for use by professors, teachers, instructors, tutors, etc. and is typically used for the creation of demonstrations, examples, assignments or tests.

    The Lab version is for use by students at school in a multi-station laboratory environment. It is available either in networked or stand-alone configurations, and has the same features as the Education version.

    The Student version is for use by students for home study on their personal computer.

    Multisim 7 contains schematic capture and simulation features. The following lists these features and advises you which version of Multisim contains each feature.

    FunctionalityEducation Version

    Student Version

    Customizable Interface � �

    Multiple Workspaces �

    User Database � �

    Corporate Database �

    Title Block � �

    Symbol Editor �

    OrCAD Capture Import �

    Auto and Manual Wiring � �

    EDAparts.com � �

    Bill of Materials � �

    Project Manager (Project Support) �

    Hierarchical Design (Blocks) �

    Subcircuit � �

    Fast Auto-Connect Passives � �

    Multisim 7 Education User Guide 1-3

  • Introduction

    Intr

    oduc

    tion

    Rubberbanding on Part Move � �

    Export to Third Party Layout � �

    Virtual Wiring (by node names) � �

    Modeless Operation � �

    Forward/Backward Annotation � �

    Standard Component Search � �

    Graphics in Description Box � �

    Electrical Rules Checking � �

    Multi-sheet Flat Designs �

    Graphic Annotation � �

    Spreadsheet View �

    Constraint Driven Capture �

    Bus Vector Wizard and Connect �

    User Defined Fields �

    Title Block Editor � �

    Advanced Component Search �

    Pin/Gate Swap �

    Simulation Advisor � �

    Virtual, Interactive, Animated Parts � �

    SPICE Analog/Digital Simulation � �

    Interactive Simulation � �

    PSpice Import � �

    Scrolling Text Synchronized with Simulation

    � �

    FunctionalityEducation Version

    Student Version

    1-4 Electronics Workbench

  • Multisim 7 Features Summary

    Introduction

    Integration with NI Labview � �

    Co-simulation of SPICE/HDLs � �

    Component Wizard �

    Internet Design Sharing � �

    Multiple Overlapped Traces in Grapher

    � �

    Precision Coordinates in Grapher � �

    New v7 Models � �

    Filter Wizard � �

    555 Timer Wizard � �

    XSpice Command Line Interface �

    Postprocessor � �

    Nested Sweep Analysis �

    Code Modeling �

    Batched Analysis �

    User Defined Analysis �

    Cross-Probing � �

    Multiple Instances of Instruments � �

    Model Makers �

    RF Design Module � �

    MEPS Education Components - 6250 Optional add-on Not available

    VHDL Simulation Optional add-on �

    Verilog Simulation Optional add-on �

    DC Operating Point Analysis � �

    Transient Analysis � �

    FunctionalityEducation Version

    Student Version

    Multisim 7 Education User Guide 1-5

  • Introduction

    Intr

    oduc

    tion

    Fourier Analysis � �

    Noise Analysis �

    Distortion Analysis �

    DC Sweep Analysis � �

    AC Sweep Analysis � �

    DC Sensitivity Analysis �

    AC Sensitivity Analysis �

    Parameter Sweep Analysis � �

    Temperature Sweep Analysis � �

    Pole Zero Analysis �

    Transfer Function Analysis �

    Worst Case Analysis � �

    Monte Carlo Analysis �

    Trace Width Analysis �

    3 dB Point Analysis �

    Batched Analysis �

    Nested Sweep Analysis �

    User Defined Analysis �

    IV Analysis � �

    Noise Figure Analysis �

    RF Circuit Characterizer � �

    Matching Network Analysis � �

    Digital Multimeter � �

    Frequency Generator � �

    Two-channel Oscilloscope � �

    Bode Plotter � �

    FunctionalityEducation Version

    Student Version

    1-6 Electronics Workbench

  • Multisim 7 Features Summary

    Introduction

    Word Generator � �

    Logic Analyzer � �

    Logic Converter � �

    Wattmeter � �

    Distortion Analyzer � �

    Voltmeter � �

    Ammeter � �

    Dynamic Measurement Probe � �

    Agilent Simulated Digital Multimeter � �

    Frequency Counter � �

    Four-channel Oscilloscope � �

    Agilent Simulated Oscilloscope � �

    Agilent Simulated Arbitrary Waveform Generator

    � �

    Network Analyzer � �

    Spectrum Analyzer � �

    Component Database Parts 9,000 2,150

    FunctionalityEducation Version

    Student Version

    Multisim 7 Education User Guide 1-7

  • Introduction

    Intr

    oduc

    tion

    1-8 Electronics Workbench

  • User Interface

    Chapter 2User Interface

    This chapter explains the basic operation of the Multisim 7 user interface, and briefly describes all available Multisim 7 commands.

    Some of the features described in this chapter may not be available in your edition of Multisim 7. See “1.4 Multisim 7 Features Summary” on page 1-3 for a description of the features available in your edition.

    The following are described in this chapter.

    Subject Page No.

    Introduction to the Multisim Interface 2-3

    ToolbarsStandard ToolbarComponent ToolbarVirtual ToolbarGraphic Annotation ToolbarInstruments Toolbar

    2-42-52-72-92-102-11

    Menus and CommandsFile MenuEdit MenuView MenuPlace MenuSimulate MenuTransfer MenuTools MenuReports MenuOptions MenuWindow MenuHelp Menu

    2-132-132-172-192-222-252-332-342-372-382-382-39

    Multisim 7 Education User Guide 2-1

  • User Interface

    Use

    r In

    terf

    ace

    Setting Schematic Capture PreferencesAbout Setting Schematic Capture PreferencesUsing the Preferences Dialog BoxCircuit TabWorkspace TabWiring TabComponent Bin TabFont TabMiscellaneous TabRule Check TabPCB Tab

    2-402-402-402-422-432-442-452-462-482-482-52

    Customizing the InterfaceCommands tabToolbars tabKeyboard tabMenu tabOptions tabCustomization Pop-up MenusOther Customization Options

    2-522-532-542-552-562-572-572-58

    Subject Page No.

    2-2 Electronics Workbench

  • Introduction to the Multisim Interface

    User Interface

    2.1 Introduction to the Multisim InterfaceMultisim’s user interface consists of the following basic elements:

    Menus are where you find commands for all functions. For details, see “2.3 Menus and Commands” on page 2-13.

    The Standard Toolbar contains buttons for commonly-performed functions, as described in “2.2.1 Standard Toolbar” on page 2-5. Included in this toolbar are the standard Windows-type buttons and the key buttons used to control Multisim 7.

    Menu Bar

    Status bar Circuit window

    “In Use” list

    Scroll left/rightLink to Edaparts.com

    Virtual toolbar

    Spreadsheet view

    Standard toolbar

    Component toolbar

    Active circuit tab Instruments toolbar

    Zoom buttons

    Project barGraphic Annotation toolbar

    Simulation switch

    Multisim 7 Education User Guide 2-3

  • User Interface

    Use

    r In

    terf

    ace

    The Instruments Toolbar contains buttons for each instrument, as described in “8.1 Introduction to the Multisim Instruments” on page 8-3.

    The Component Toolbar contains buttons that let you select components from the Multisim libraries for placement in your schematic. See “2.2.2 Component Toolbar” on page 2-7. This toolbar includes a link to EDAparts.com, which launches your web browser and directs you to the Electronics Workbench EDAparts.com website. You can then navigate the site to download parts, as described in “5.3 Using EDAparts.com” on page 5-6.

    The Virtual Toolbar contains buttons that let you pl