This rechargeable all LED Work Light has both a spotlight and a �oodlight built in. The spotlight, located in the base of the handle, is rated at 32 Lumens. It’s perfect for putting a narrow beam of light into a speci�c area. The �oodlight, rated at 230 Lumens, is designed for lighting up a large area. The idea is simple, use the spotlight to �nd the problem, and the �oodlight to light up the area when �xing the problem. The work light has two magnets built in...one at the balance point in the middle of the handle, and the other at the tip of the light. The �at-bottom design of the handle means the light will stand up on most �at surfaces, and the octagonal shape to the handle keeps the �oodlight aimed in the correct direction when you lay the light on its side. Further adding to the work light’s hands-free features is the detachable magnetic hook. It can be attached to either integrated body magnet and rotated 360 degrees. The integrated Nickel Metal Hydride battery can be recharged with the included AC or DC power supply/charger.

NSR-2166RNSR-2166B

Multi-Purpose Work LightRechargeableMulti-Purpose Work LightRechargeable

2303232230 Floodlight

Lumens

SpotlightLumens

FloodlightLumens

SpotlightLumens

• 3 Hours run-time• Dual Integrated Magnets & Hook• Single Rocker Switch• Powered by integrated Nickel Metal

Hydride rechargeable battery

• 3 Hours run-time• Dual Integrated Magnets & Hook• Single Rocker Switch• Powered by integrated Nickel Metal

Hydride rechargeable battery

NSR 2166 seriesNSR 2166 series

Floodlight

Spotlight

RE S I S T A N T

WATER

Multi-Purpose Work LightRechargeableMulti-Purpose Work LightRechargeable

NSR 2166 seriesNSR 2166 series

FEATURES

§ Light has 60 LEDs rated at 230 lumens arranged in a floodlight pattern and6 LEDs in the base of the handle rated at 32 lumens serving as a spotlight§ Two built-in magnets, one at the tip of the light and the other at the

mid-point of the body for hands-free use§Magnetic hook can be attached to either of the built-in magnets and

can be rotated 360 degrees for even more hands-free versatility§Octagonal body design keeps the light in place when laid on its side§ Flat bottom design allows the light to stand up§Water Resistant§ Impact & chemical resistant§ Integrated Nickel Metal Hydride (NiMH) battery§ Includes both AC & DC power supply/charger§ Limited 1 Year Warranty *

INCLUDED

§Worklight with built-in dual magnets (body & tip)§ Integrated Nickel Metal Hydride battery§Removeable hook§AC power supply/charger§ 12 V DC power supply/charger

SPECIFICATIONS

§ Lumens: floodlight 230, spotlight 32§Run-time: floodlight 3 hrs, spotlight 18 hrs§Recharge time: 8 hrs§Water rating: IP-X4 water resistant§Drop rating: 2 meters§ Length: 14.3in, head diameter: 1.4in, handle diameter: 1.8in, weight: 16oz

Magnet on top withremovable hook

6 LED Spotlight Magnet on body withremovable hook

Using the floodlight Using the spotlight

80362 5

80363 2

Model UPC 0 17398

NSR-2166B

NSR-2166R

*Limited 1 Year Warranty Product is warranted to be free from defects in workmanship and materials to the original purchaser for one (1) year from the date of purchase, and includes the LEDs, housing, lenses, electronics, switches, rechargeable batteries and chargers. Disposable non-rechargeable batteries are excluded from this warranty. Normal wear and failures which are caused by accidents, misuse, abuse, faulty installation and lightning damage are also excluded.

Please read these instructions before using your work light. Be sure to charge the work light before the fi rst use.

� CAUTION: Do not use this work light in explosive atmospheres, near fl ammable liquids, or where explosion-proof lamps are required. Do not immerse in water.

� CAUTION: For light duty work only.

CHARGING INITIAL USE

Fully charge the work light before the fi rst use. If the battery is new or has been unused for several months, several charge and discharge cycles may be needed to reach full battery capacity. To reach maximum performance, run the light to completely discharge the battery and then recharge. Each charge cycle will extend the operation time until maximum capacity is achieved. The charge time for maximum capacity is approximately 8 hours.

REGULAR USE

� Use only the supplied AC or DC charging adapter.

� For best performance, charge the work light when the LED’s start to dim.

� Connect the AC power adapter to the light. The red indicator will light.

� The red light indicates the work light is being charged. The red light remains on until the battery is fully charged. At full charge, the light turns off. The total time to full charge varies depending on the remaining charge in the battery pack.

� Keep the work light plugged into the charger to maintain a trickle charge.

TIPS TO EXTEND BATTERY LIFE

� The work light’s Nickel Metal Hydride internal battery does not have any recharge memory effect. Charging the work light often helps extend its useful life.

� A new work light or one that has not been used for a long period of time may not accept a full charge initially. This is normal and does not indicate a problem. Fully discharge and then charge the unit several times to condition the battery pack for full capacity. As the battery pack capacity increases the charge time shortens.

� Charge the unit after each use, whether the work light is fully discharged or not.

� Store the work light at room temperature

Instruction Manual

Model 2166THANK YOU FOR PURCHASING THE 2166 RECHARGEABLE WORK LIGHT.

SAVE THESE INSTRUCTIONS.

OPERATIONTURNING THE WORK LIGHT ON/OFF

The work light has a 2 position rocker switch to activate either the fl oodlight or spotlight.

FLOODLIGHT

� Press the Rocker Switch to the Up position to activate the fl oodlight SPOTLIGHT

� Press the Rocker Switch to the Down position to activate the spotlight TURNING THE WORK LIGHT OFF

� The center position of the Rocker Switch turns the light off

INTEGRATED MAGNETS AND MAGNETIC HOOK

� The work light has two integrated magnets, one in the body of the light and the other at the tip. These magnets will support the weight of the light when magnetically attached to a ferrous metal surface. The removable Magnetic Hook can also be attached to either of the integrated magnets and offers additional hands-free options.

CLEANING

� Disconnect the light from the power source

� Wipe with a clean dry soft cloth

� Do not use any solvent or abrasive cleaners

BAYCO PRODUCTS LIMITED 1-YEAR WARRANTYWARRANTY

Bayco Products, Inc. warrants this product to be free from defects in workmanship and materials to the original purchaser for one (1) year from the date of purchase, and includes the LEDs, housing, lenses, electronics, switches, rechargeable batteries and chargers. Bulbs (other than LEDs) are covered for ninety (90) days from the date of purchase. Disposable non-rechargeable batteries are excluded from this warranty. Normal wear and failures which are caused by accidents, misuse, abuse, faulty installation and lightning damage are also excluded.

Consequential damages, incidental damages or incidental expenses, including damage to property are also not covered under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specifi c legal rights, which may vary from state to state.

IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES OR SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE. THE TOTAL CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES OF ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT PAID BY CUSTOMER.

If this product is used for rental purposes, the warranty term is reduced to 90 days from the date of purchase.

WARRANTY CLAIMS – USA

Return the product to the place of purchase for all warranty related issues. If this is not possible, contact Bayco Customer Service for a Return Goods Authorization (RGA). Do not return this product to Bayco without fi rst receiving an RGA Number from Bayco Customer Service. When returning the product, the RGA Number must be written on the outside of the shipping box.

WARRANTY CLAIMS – OUTSIDE OF USA

Return the product to the place where purchased for all warranty related issues.

EXTENT OF COVERED WARRANTY WORK

Bayco will repair or replace this product at our option. If it is determined that the warranty is no longer in effect, Bayco will contact you with a repair estimate before beginning any work.

WARRANTY QUESTIONS

If you have any questions about this warranty or any other Bayco product inquiries, please contact Bayco Customer Service .

BAYCO PRODUCTS LIMITED 1-YEAR WARRANTY

WARRANTY

Bayco Products, Inc. warrants this product to be free from defects in workmanship and materials to the original purchaser for one (1) year from the date of purchase, and includes the LEDs, housing, lenses, electronics, switches, rechargeable batteries and chargers. Bulbs (other than LEDs) are covered for ninety (90) days from the date of purchase. Disposable non-rechargeable batteries are excluded from this warranty. Normal wear and failures which are caused by accidents, misuse, abuse, faulty installation and lightning damage are also excluded.

Consequential damages, incidental damages or incidental expenses, including damage to property are also not covered under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specifi c legal rights, which may vary from state to state.

IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES OR SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE. THE TOTAL CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES OF ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT PAID BY CUSTOMER.

If this product is used for rental purposes, the warranty term is reduced to 90 days from the date of purchase.

WARRANTY CLAIMS – USA

Return the product to the place of purchase for all warranty related issues. If this is not possible, contact Bayco Customer Service for a Return Goods Authorization (RGA). Do not return this product to Bayco without fi rst receiving an RGA Number from Bayco Customer Service. When returning the product, the RGA Number must be written on the outside of the shipping box.

WARRANTY CLAIMS – OUTSIDE OF USA

Return the product to the place where purchased for all warranty related issues.

EXTENT OF COVERED WARRANTY WORK

Bayco will repair or replace this product at our option. If it is determined that the warranty is no longer in effect, Bayco will contact you with a repair estimate before beginning any work.

WARRANTY QUESTIONS

If you have any questions about this warranty or any other Bayco product inquiries, please contact Bayco Customer Service.