QUIMICAS SANZ - QS GROUP (SPAIN) adhesive sealant waterproof
Multi-Purpose Adhesive Sealant - Novagard Solutions€¦ · t Permanently Flexible t Easily Gunned...
Transcript of Multi-Purpose Adhesive Sealant - Novagard Solutions€¦ · t Permanently Flexible t Easily Gunned...
Product Information
Case Pack Information
Adheres To
Product Advantages
SILIC
ONE
Multi-Purpose Adhesive Sealant
Vinyl Concrete Fiber CementBrick Masonry SteelFiberglass Wood CeramicsAluminum Stone Building Paper RV Marine Single-Ply
Waterproof, Premium All-Weather Silicone Will Not Shrink, Crack, Sag or SlumpExcellent Tooling Characteristics Weather Tight SealService Temperature -40 F to +400 F Low OdorApplication Temperature -20 F to +120 F Solvent FreeUV and Mildew Resistant Invisible to UV Light Permanently Flexible Easily Gunned at all Temperatures
Description - Multi-Purpose Adhesive Sealant Description - Multi-Purpose Adhesive Sealant
Item Number - 02-MX0XXXX-10C1 Item Number - 02-MX0XXXX-10C1
Size - 10.3 FL. OZ (304 mL) Dimensions - 11 15/16” X 9 15/16” X 8 1/8”
Unit Dimensions - 9” X 2” X 2” Case Weight - 10 lbs - 12 packs 20 lbs - 24 packs
Cases Per Pallet - 60 - 24 packs 120 - 12 packs Also available in sausage packages:Item Number - 02-MX0XXXX-20S1Size - 20 FL OzDimensions - 12 3/4” x 2” (unit) 13 1/2”x 8 1/4” x 6” (case)
Over 60 colors available for siding, fiber cement, roofing gutters, coil & trim
Physical Property Test Method Typical ValueAppearance PasteApplication Temperature -20 F to 120 FService Temperature -40 F to 400 FSkin Over Time 3/8" @ 50% RH & 77F 5-10 minThrough Cure Time 3/8" @ 50% RH & 77F 24 hoursExtrusion Rate 1/8" Orifice @ 50 psi 30-80 gm / minTensile Strength ASTM D412 140-220 psiElongation ASTM D412 500-1000 %Tear Resistance ASTM D624 30-35 pliShore Hardness 20 +/- 5
AAMA Verified
Advanced Polymer Paintable Sealant
Adheres To Concrete Wood Galvanized Metal Brick Metal Fiber Cement Stone Aluminum Foam Vinyl
Masonry PVC Stucco EPMD SBS Mod Bit
Product AdvantagesNo shrinking or cracking VOC compliantPaintable Applies vertically and overheadExcellent weathering properties Safe to use indoors - no odorSingle component Can be top coated in 24 hoursResists dirt pickup No special tools or mixing AAMA verified for window and No solvents
door installation
Advanced Polymer Paintable Sealant
AAMA Verified
Physical Property Test Method Typical ValueAppearance PasteTemperature Range -75 F to 220 FSkin Over Time 3/8" @ 50% RH & 77F 30 minThrough Cure Time 1/8" @ 50% RH & 77F 40 hoursExtrusion Rate 1/8" Orifice @ 50 psi 320 gm / minTensile Strength ASTM D412 225 psiElongation ASTM D412 450-500 %Shore Hardness ASTM C661 46
Description - Advanced Polymer Paintable Sealant Description - Advanced Polymer Paintable Sealant
Item Number - 02-MP0XXXX-10C1 Item Number - 02-MP0XXXX-10C1
Size - 10.3 FL. OZ (304 mL) Dimensions - 11 15/16” X 9 15/16” X 8 1/8”
Unit Dimensions - 9” X 2” X 2” Case Weight - 10 lbs - 12 packs
Cases Per Pallet - 120 - 12 packs
Product Information Case Pack Information