INDEX

I. MRO Network Architecture

II. Added value of MRO Network

III. Why the MRO Network!

IV. Companies in the network

V. Contacts

The network model adopted is classified as "heavy" according to the latest legislative guidelines. This allows us to acquire the “rank” necessary to be able to work with relevant stakeholders, such as governament agencies or the corporate operators of transportation systems.The setup of the network was based on the following three points: • Increase in business.Increase in business.• Development of innovative, and more Development of innovative, and more integrated, products and services.integrated, products and services.• Professional growth.Professional growth.

MRO NETWORK ARCHITECTURE

The companies that make up the network fall into one of THREE SPECIFIC CATEGORIES:Production and Maintenance of components which are organized accordingindustrial criteria.Certification, training and engineering aimed to both the market and the industrial activity.

Logistics Logistics ServicesServices

Industrial Industrial ManufacturingManufacturing

SupportSupport ActivitiesActivities

MRO NETWORK ARCHITECTURE

ADDED VALUE OF MRO NETWORKUnique Contact pointUnique Contact point

for a wide range of services / products and one interface ... The Network

Capacity of customizationCapacity of customizationProducts and interior fittings of the machinery, achievable during maintenance activities

Spares “Out of Market”Spares “Out of Market”ability to reproduce, even in small series, no longer available spare parts

Flexibility - adaptabilityFlexibility - adaptabilityflexible responses to varying needs

Statistical and predictive analisysStatistical and predictive analisysFailure forecast and stocks of spare parts to minimize machine downtime

Equipment testingEquipment testing“in house” development , compliant with the requirements of operators and parts manufacturers

Support ServicesSupport Serviceseducation, certification, training, ILS, etc.

The implementation of the network will be mainly conducted through a project aimed to the development and implementation of methodologies / products / services for the "lean & smart MRO" as a new frontier of product support.

ADDED VALUE OF MRO NETWORK

WHY THE MRO NETWORK

• To differentiate and/or even evolve your To differentiate and/or even evolve your own businesses.own businesses.

• To share experiences and generate new To share experiences and generate new ideas and business opportunities.ideas and business opportunities.

• To enter new markets, no longer alone as To enter new markets, no longer alone as pioneers, with a support network.pioneers, with a support network.

• To have the opportunity to access new To have the opportunity to access new sources of financial funding.sources of financial funding.

• To access an "evergreen" market.To access an "evergreen" market.

COMPANIES IN THE NETWORK

INDUSTRY

Blue MagicBlue MagicCMDCMD

Estintori SignorottiEstintori SignorottiGiannuzziGiannuzziUnoaUnoUnoaUno

Aero SekurAero SekurEDAEDALeatLeatLTGLTG

SERVICES

AltairAltairSetelSetel

Heli aeroHeli aeroItal ConsulItal Consul

Leonardo SistemiLeonardo SistemiMaxFonMaxFon

INDUSTRY

Blue Magic rotable line includes: Atlas and KSSU drawers, trays with and without runner guides, dry-ice shelves, tableware, planned to have the utmost functionality; everything can be customized for material, color, logo

Products portfolio - Rotable

INDUSTRY

Products portfolio - DisposableBlue Magic disposable line includes: plates, cutlery, glasses, cups, containers for inflight catering, with a strong attention to design; they are available in ‘eco-friendly’ version too

Blue Magic know-how:- Moulds planning according to customers’ needs;- New products development, codesign, new materials and solutions testing;- SMD electronic boards: study, engineering, production with a dedicated line

Capabilities

INDUSTRY

INDUSTRY

CMD from more than thirty years in the marine industry produces and markets marine diesel engines with the FNM brand for pleasure boats around the world's . CMD has always focused on technological innovation by focusing its resources on the technical growth, adapting to market changes.

Today has grown with its products, giving rise to two new also well-established fields, one operating in the manufacturing sector machines for the automotive, aerospace, hydraulics, industrial, agricultural and the other in the design of internal combustion hi-tech engines and related electronic control systems.

CMD is building the GF56 engine , a common rail diesel engine, two stroke with a displacement of 5600 cc for general aviation and UAV markets and the CMD22 gasoline engine for VLA and LSA categories.

INDUSTRY

CMD can implement the complete design of of the hi-tech internal combustion engines and their electronic control systems with electrical interface for the most various applications.

CMD22 Engine

GF56 Engine

•Engine standard 120 hp•Avaibleas non certified engine (0.82Kg/Kw)•Light, quiet and smooth•Very low fuel consumption

•Diesel Cycle•220 Kw & 220 Kg•2-stroke, direct injection Common Rail•6-cylinder horizontally opposed, 5.6 liter

•Low cost of operation•Leading class power to weight radio•TBO 2,000 hrs•Fed with Jet A1 or Diesel Fuel•Liquid-cooled•Supercharged with two dynamic compressors and two Roots compressors•Direct drive

INDUSTRY

The system management and environmental quality of the CMD is certified under:•ISO 9001 : 2000 (Qualità) •ISO 14001 (Ambientale) •EN 9100 : 2009 (Settore Aerospaziale)

The CMD experience allows today to cover every phase of the engineering design of an engine.CMD has consolidated its experience in the MRO mainly through its range of services assistance and review of its marine engines with a global network and with the implementation of their own process.

INDUSTRY

EHS TRAINING

EHS

EHS CONSULTING

FIRE FIGHTING SERVICES

SALES OF FIRE FIGHTING

EQUIPMENTS, SAFETY

PRODUCTS, ETC.

PLANNING AND INSTALLATION OF ENGINEERED FIRE SUPPRESSION SYSTEMS (INDUSTRIAL AND NAUTIC)FIRE SYSTEMS

MAINTENANCE (FIRE

EXTINGUISHERS,

ENGINEERED FIRE

SUPPRESSION SYSTEMS,

ETC)

COMPRESSED AIRLINE

BREATHING APPARATUS

AND ACCESSORIES MAINTENANCE

FIRE FIGHTING CONSULTING

(VV.F. DOCUMENTATI

ON, ETC)

INDUSTRY

CREDITS

- ISO 9001:2008 - RINA N.2001 RM32AL

INSTALLATION AND MAINTENANCE OF NAUTIC ENGINEERED FIRE SUPPRESSION SYSTEM

- MAINTENANCE CENTER MSA- AGENCY RIVOIRA

AWARDS

- AWARD “Qualità” FEDERLAZIO 2008

INDUSTRY

Aircraft interiors

INDUSTRY

Thermoacoustical insulation

Thermoformed parts

INDUSTRY

• AGUSTAWESTLAND- classe B, campi di applicazione 190 (Finish & Coating)/ 909 (Machining)/ 915 (Plastic Fabrication)/ 915-Y (Non Structural Bonding)/ 920 (Tooling)/ 934 (Interior Installation)/ 950-B (DMFG Medium Level)

• ALENIA AERONAUTICA –CLASS C2-C3 E C4 (Plastic Fabrication)/ Painting and decoration)

• PZL II CLASS (REF. PZMA/2231/2008)

• EADS SOGERMA (Interiors Furnishing)

• DUQUEINE Interiors Furnishing)

IN PROGRESS•CERTIFICAZIONE MILITARE SECONDO NORMATIVA AQAP2110 •POA JAR/EASA PART 21 SUBPART G

• UNI EN ISO 9100:2009 “Aerospace series – Quality management system requirements and Quality Systems”

• UNI EN ISO 9001:2008

QUALITY CERTIFICATIONS

unoauno s.r.l.

INDUSTRY

• Unoauno is a firm specializing in Rapid Prototyping technologies applied in a number of fields such as: aerospace, design and architecture.

• The Company was founded in 2003 combining the experience of the two founding partners, the interior designers Annalisa Battista and Simona Nacamulli, in the experimental application of new technoligies. Today , in Italy, it has become the point of reference for those who need to transform an idea into a physical product.

• Thanks to the expertise acquired over the years and the use of CNC machinery, Unoauno delivers very high quality items also from the finishing point of view.

• Unoauno creates: manufactured goods, prototypes for ergonomic, functional and assembly testing; small number production, simulation models for design or commercial requirements.

• In 2010, Unoauno entered into an agreement with the DATA Department “Sezione Arti, Design e nuove Tecnologie” of the University of Rome “La Sapienza” and FGTecnopolo, playing a leading role also in research and innovation projects related to the academic world.

unoauno s.r.l.

INDUSTRY

FDM Rapid Prototyping technology is the most widely used in the Aeronautic world

This technology thanks to the properties of the materials it can use (ABS, PC, PPSF and Ultem) and to soluble support material, allows the design objects with an honeycomb structure:

• It is possible to manage the density of the cells depending on specific and technical needs of the part.

• It is possible to insert metal parts during production

• FDM technology uses different materials so as to meet different needs of strength, temperature, and longevity.

unoauno s.r.l.

INDUSTRY

• Parts built with FDM technology offer an easy, fast and cost-effective alternative to machining or molding of composite materials.

• FDM technology using soluble support as production material offers an alternative approach to soluble mandrel manufacturing

• Production of final goods: single piece or small quantities

• Customized finishing

INDUSTRY

IndustriesIndustries

EDAEDAEDA Group EDA Group Plants/Activities/ProductsPlants/Activities/Products

R&D CENTER - ITALYBURN-IN SYSTEMS PRODUCTIONTEST EQUIPMENTS PRODUCTIONTHERMAL/CLIMATIC CHAMBERS PRODUCTION E.S.S. SYSTEMS PRODUCTIONEUROPE/ASIA SERVICE SUPPORT [ITALY – SINGAPORE]EUROPE/ASIA SALES [ITALY – SINGAPORE]RELIABILITY TEST APPLICATIONSPRODUCTION/BURN-IN APPLICATIONS [SINGAPORE]CUSTOMER ENGINEERING SUPPORT INDUSTRIAL AUTOMATIONMECHANICAL DESIGN/PROTOTYPING

INDUSTRY

IndustriesIndustries

EDAEDA

LEAT started its activities in 1962 in repair, overhaul, maintenance and upgrade of communication equipment , instrumentation and audio recorders for military avionics applications. LEAT today is composed by experts and certified technicians trained for the design, development, production, integration, modification, repair, testing, and certification of new or retrofit products and services LEAT is owned by Globavia SpA since August 2010

Lines of Product and ServiceModification, maintenance, repair, overhaul and modernization of avionics equipment and navigation systems installed on aircraft and / or certification of new ones in conformity of EASA MOA part 145 and NATO AQAP-2110 (AER-Q-2110).

Designing avionics systems in conformity of EASA DOA Part 21J and NATO AQAP-2110 (AER-Q-2110)

Design and manufacture of avionics equipment such as the ICS (intercom system) and ASU (Autopilot Switching Unit) in conformity EN 9100:2009

Overview

INDUSTRY

EASA M.O.A. Part 145 – (Maintenance Organization Approvals)EASA D.O.A. Part 21J – (Design Organization Approvals)UNI EN 9100:2009UNI EN ISO 9001:2008UNI EN ISO 17025NATO AQAP-2110ItAF AER-Q-2110

Certifications

INDUSTRY

Capabilities

Aerospace GSE systems

Custom design of equipment and systems

Parts and components reverse engineering

Systems Test equipment design and manufacturing

Antennas and related servosystems

Engineering RAMS (Reliability, Availability, Maintainability, Safety)

Parts, Materials and Processes

Technical Documentation

Training Courses

Facilities Climatic chamber

Anechoic chamber (compact range type)

Vibration test equipment

Clean room

INDUSTRY

Computer-Based Automatic Test Equipments

Our company has ten years of experience in the GSE. Our systems are based on a general purpose platform, easily interfaced

with devices such as tablet, etc. They are easily adaptable to any type of test because it can be easily

reconfigured by simply replacing interface cards and control software. Equipment can be delivered also in special water-resistant, mechanically

ruggedized, transportable packages that makes for reliable use in the flight line.

INDUSTRY

Special Purpose Test Equipments

In the case where it is required a very high safety factor, or when you need to test “one-shot” systems (eg: pyrotechnic devices), special GSE units can be developed "ad hoc".

This kind of systems are optimized for testing a single device or system: internally developed solely in wired logic, for maximum reliability.

Our experience includes systems used to test the deployment of antennas for communications satellites.

INDUSTRY

INDUSTRY

Aero Sekur provides full assistance for MRO services for the Helicopter Industry.

INDUSTRY

• FAA and EASA part 145 certified for escapèing slides and rafts of aircrafts (MD80, MD11, A320f, A330/340, B737f, B757, B767) overhaul

• US-Dot certified for testing and recertification of aircraft gassing systems

INDUSTRY

Aero Sekur, thanks to its own Repair Stations Global Network, is really in conditions to grant a prompt and efficient MRO service to the Clients Fleet worldwide.

SERVICES

AviationAviationTrainingTraining

Management Management systemsystemSafetySafety

Maintenance Maintenance servicesservicesLogistic Logistic

engineeringengineeringComposite Composite materialsmaterials

Test and validationTest and validation

SERVICES

AVIATIONAVIATIONReliable and qualified partner for support in civil and military

sectors

• Support for organizations and product approvals (EASA/FAA/MIL)• Technical and organizational consultancy• Simulators (Training devices)• Servicing, line and base maintenance

TRAININGTRAINING• Personnel training in aviation and industrial sectors. • Support to business financing for training

The instructional activities can be delivered either in traditional modes (class-room, laboratories, etc.) or in Technology Based Training scenarios (i.e. interactive

simulations, CBT, e-learning scorm conformant, etc.)QUALITY MANAGEMENT SYSTEMSQUALITY MANAGEMENT SYSTEMS

Consultancy for development and certification of quality management systems – aerospace series

• AS/EN 9100, 9110, 9120• other standards: ISO 9001, ISO 14001, OHSAS 18001, ISO 50001

SAFETYSAFETYConsultancy for safety assessment, support and management in aviation and

industrial sectors

• Occupational Health and Safety (OH&S)• Safety Management System – ICAO/EASA

SERVICES

MAINTENANCE SERVICEMAINTENANCE SERVICEMaintenance support on military and civil aircrafts

• Servicing, line and base maintenance• Aircraft disassembly, assembly, transport• Handling and logistics

LOGISTIC ENGINEERING LOGISTIC ENGINEERING Integrated Logistic Support Engineering

• Services: LSA deliverables, Technical documentation, Maintenance planning• Dependability analyses: RAM, FMEA, FMECA, LCC, System effectiveness• Integration: IETM/IETP techniques, Configuration control• Tools: for Logistics, Editing & Publishing, Integrated Training

COMPOSITE MATERIALSCOMPOSITE MATERIALS Advanced Thermoplastic Matrix Thermoformable Laminate

• Very fast processing, no autoclave, panels or foam and honeycomb sandwich • Applications for aviation primary and secondary structures, interiors, wind turbines, automotive

TESTING AND STUDIESTESTING AND STUDIESAcoustics, Vibrations, Fluid mechanics, Radio, Electrical, EMC, Harsh environments

• Test, validation, engineering, numerical simulation, training

SERVICES

Established 1973

SERVICES

OPERATIVE NEEDS

REGULATIONS

ENVIRONMENT

SUSTAINABILITY

RAM REQUIREMENTSCONFIGURATION

MNGT

The core ILS business

38 years of experience

SERVICES

We provide the ILS skill within theAerospace & Defence SME Cluster

The network approachCooperation with SME

Cluster & University allows a multidisciplinary SE approach

Sectors: AS&D Transportation Energy Environment Safety

38 years of experience

40 logistic engineers

International and multidisciplinary experience

Sub-contractors of the most important italian companies

Locations: Rome, Turin

SERVICES

Heliaero Consulting s.r.l. (HAC) is a consulting firm in the aviation field founded in 2005 by academic and industrial professionals.

In the past years HAC has worked with both major Italian airlines such as Alitalia, Blue Panorama Airlines, Mistral Air, and with major aircraft manufacturers such as AgustaWestland .

HAC offers consulting services and Technical training activities.

SERVICES

HAC provides consulting services to companies in the field of EASA certifications:

In accordance with Part 21 of Regulation (EC) 1702/2003 (DOA, ADOA, POA , ETSO, etc.)

In accordance with Part M and/or Part 145 of Regulation (EC) 2042/2003 (CAMO and/or Aviation Maintenance Organisation)

In accordance with Part 147 of of Regulation (EC) 2042/2003 (Aviation Maintenance Training Organisation)

In addition, HAC can provide consulting services also in the field of Management Area (Corporate Finance and Business Planning, Marketing, Human Resource )

Consulting Services

SERVICES

Training Activities

HAC provides the following training activities: Basic courses (Part 66 modules) for Aircraft

Maintenance Licence (LMA) in accordance with Part 66 of Regulation (EC) 2042/2003 (CAMO)

Training courses, ENAC approved, for Maintenance Organisation Personnel (Human Factor, EWIS, Fuel Tank Safety).

Technical training regarding design softwares such as CATIA®, NASTRAN®, STAR-CD® et al.

SERVICES

Services in Aeronautical Services in Aeronautical SectorSector

Logistics Engineering Consulting: RAM Analysis (Reliability, Availability, Maintainability), Safety&Security Analysis (FTA, Hazard Analysis, Hazop), FMECA, Testability, Life-Cycle-Cost, DOE, Risk Assessment, RCM, Feasibility Studies, Manuals and Maintenance Plans, FRACAS, etc…

Design of Mechanical Structures by means of Finite Elements Tool

System Engineering based on multi-domain System Analysis

“Concurrent Engineering” for Research and solution of real and potential trouble, including through innovative methods

Probabilistic Design, even with few statistical data, by means of original proprietary methodology (proprietary tool “RELYSOFT”)

SERVICES

““RELYSOFT”RELYSOFT”

“RELYSOFT” is the ItalConsul’s Methodology, which provides an innovative approach to the Probability Calculus of the physical processes.

Traditional approaches, based on the use of Failure Rate (for example NPRD), reckon accidental all kind of failures and need a great deal of statistical data.

Instead, “RELYSOFT” is based on Failure Equation, seeks the failure causes, reconstructs (by means of analytical expression or simulations) and randomizes the physical event (by means of the uncertainty of the “Physical Quantity”) and looks at the effects.

“RELYSOFT” reduces also, in comparison to traditional methods like the “Montecarlo” method, the amount of simulations which are necessary for the Calculus of the Success Probability.

SERVICES

Verification of Logistics Engineering documents and carrying out of FMECA and RCM Analysis of the M346 Landing Gear

RAMTS and FMECA Analysis of dispensing systems, installed on the Agusta helicopters NH90

RAMTS and FMECA Analysis of dispensing systems, installed on the Sikorsky helicopters

Structural Analysis of dispensing systems, installed on the Agusta helicopters NH90, verification to the Crash and Shock Tests by means of Finite Elements Tool.

RAMTS and FMECA Analysis of the countermeasure system, installed on Agusta helicopter

ExperiencesExperiences

SERVICES

BUSINNES AREAS:

– Design and manufacture of automatic and/or manual Test Benches for electronic units oriented to:

• support production/validation/qualification tests;

• execute GO-NOGO validation tests;

• execute troubleshooting during maintenance/repair phase;

• design and manufacture of custom peculiar prototypes.

PRODUCTS:

– Automatic Test System (ATS), Special To Type Equipment (STTE), Test Box (TB)

– Application, functional and/or diagnostic sw (languages: C/ATLAS, NI LabVIEW, NI LabWindows, C/C++)

– Ancillary equipments to support test activities (modules, cables, EMI/EMC test cables, etc.)

– Test design (Test Requirement Document, Acceptance Test Procedure, etc.)

– Data Acquisition Systems (DAS) for Engine Test Bed.

SERVICES:

– Execution od production/validation/qualification test

– Maintenance support for Test Bench.

SERVICES

GP ATE (General Purpose Automatic Test GP ATE (General Purpose Automatic Test Equipment) Equipment) Eurofighter e Tornado programEurofighter e Tornado programUtilization:

Production/validation test for the following UUT (Unit Under Test):

• Microwave Landing System Eurofighter • Distance Measurement Equipment Eurofighter • Multi Mode Receiver Eurofighter • Multi Mode Receiver Tornado

Activities:

• Design and manufacture of electrical/mechanical HW

• Development of test procedures application Sw for each UUT

Technical features:

• Commercial programmable instrumentation (PXI, VXI of National Instruments, scope, MLS e DME simulator, multimeter, PC)

• Peculiar instrumentation (Interface Test Adapter, Bus Interface Unit, Power Distribution Unit)

• SW languages (C, LabView)

Customer: Selex Elsag

SERVICES

Customer: Thales Italia

Utilization:

Functional Test of EJ200 gas turbine engine Tranche 1/Tranche 2

Activities:

• Design and realization of DAS electrical/mechanical HW components.• Development of Configuration Sw, Calibration Sw, Self-test Sw• Commissioning• User Training

Technical features:

• Programmable instruments (PXI, CRio, I/O boards, Videos, ruggedized PC)• Peculiar instrumentation ( Engine Control Module, Flight Instrument Monitor,

Engine Monitoring Unit)• Miscellaneous (Mechanical/Electrical Junction Boxes, Flow meters,

Pressure/temperature sensors installation, Dressing of Engine Adapter, etc.)• Sw development (LabWindows language)

Acquired parameters:

• Thrust• Engine Speed• Fuel Flow• Pressure• Temperature• Vibration

SERVICES

INTRODUCTION

Maxfon Campania Srl works since 2005 in IT, in these years, activities have followed two main strands:

Telecommunications and Informatics.

In the field of Telecommunications, Maxfon Campania has developed numerous projects, has created

networks of telecommunications wired and wireless, transport data, voice and security systems, video

surveillance and environmental monitoring.

In the field of Computer Science, Maxfon Campania has produced several research projects and

development. Maxfon has made advanced information systems including software for dynamic

optimization of inventory management and scheduling of production processes, augmented reality and

virtual prototyping, traceability of production processes also integrated with RFID and GIS.

Maxfon also has several certifications and authorizations:

• General Authorization from the Ministry of Telecommunications for the public offering of Internet

connectivity services as an ISP (Internet Service Providers).

• Authorization from the Ministry of Telecommunications for the public offering of broadband

connectivity as a WISP (Wireless Internet Service Provider) that is for the provision of Internet

connectivity services delivered via wireless infrastructure.

• Maxfon is enrolled in R.O.C. (Register of Communications Operators) of the Ministry of

Communications.

• Maxfon is certified by ANCCP under ISO 9001:2000-certified N. SSG0540AQ1073.

SERVICES

TELECOMMUNICATIONS SERVICE

Design, construction and maintenance of control systems and in particular video

surveillance to environmental monitoring, of the territory for security and

safeguarding of assets and public and private resources.

Design, construction and maintenance of systems connectivity voice (VoIP) and

data.

Design, construction and maintenance of wired and wireless telecommunications

networks, both on small areas of large areas (tens of kilometers).

Design, construction and maintenance of protected and public hotspots.

Design, construction and maintenance of telephone services and fax with advanced

IVR and PBX.

SERVICES

COMPUTER SCIENCE SERVICES

Design, analysis, development and integration of software (desktop and web):

Management systems, CRM, HRM and inventory management / stock;

Institutional portals of information and eLearing;

Applications for mobile devices / tablet;

Control applications for embedded devices (eg engines, controllers, PLC);

Networking platforms for user authentication;

Augmented Reality and Virtual Prototyping;

Computer security;

Design and development of integrated systems and applications dedicated to the

optimization of production and transport of vehicles and goods (routing).

Design and development of integrated systems and applications dedicated to tracking of

processes and goods.

Hosting on your server farm.

Design and implementation of virtual server farm based on cloud technology.

CONTACTS