MPPS: Michigan local governments continue seeking, and receiving, union concessions
MPPS 01_Lathe Machine
-
Upload
prashant310 -
Category
Technology
-
view
326 -
download
0
description
Transcript of MPPS 01_Lathe Machine
![Page 1: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/1.jpg)
MANUFACTURING PROCESSES
METAL CUTTING
MPPS
ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.)
![Page 2: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/2.jpg)
Metal Forming Processes: Forging Rolling Pressing
Metal Cutting Processes: Turning Drilling Planing Boring
Metal Working Processes:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
2
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 3: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/3.jpg)
Metal Joining Processes: Welding Brazing Soldering
Metal Working Processes:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
3
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 4: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/4.jpg)
The process of metal cutting in which chip is formed is affected by relative motion between the workpiece and the hard edge of the cutting tool.
Depending upon relative motion different metal cutting operations are formed such as turning, drilling, milling, boring, planning, etc.
Metal Cutting Processes:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
4
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Operation Motion of Job Motion of cutting tool
Turning Rotary Forward translation
Boring Rotation Forward translation
Drilling Fixed Rotation as well as translator feed
Planing Translatory Intermittent translation
Milling Translatory Rotation
![Page 5: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/5.jpg)
Types of Cutting Tools:1.Single Point Cutting Tool.
Metal Cutting Processes:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
5
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 6: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/6.jpg)
Types of Cutting Tools:2.Multiple Point Cutting Tool
Metal Cutting Processes:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
6
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 7: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/7.jpg)
A machine which performs material removal operation to obtain the desired shape and size.
Functions of Machine Tools:1.To improve production rate.
2.To reduce cost of production.
3.To reduce fatigue of workers.
4.To achieve better quality.
5.To reduce wastage.
Machine Tools:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
7
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 8: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/8.jpg)
Types of Machine Tools:1.Lathe Machines.
2.Shaper Machines.
3.Planer Machines.
4.Drilling Machines.
5.Boring Machines.
6.Milling Machines.
7.Grinding Machines
Machine Tools:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
8
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 9: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/9.jpg)
This machine removes the metal from the work piece to the required shape & size.
The workpiece is held & rotated with some speed and cutting tool is fixed at one position stationary.
Tool is single point cutting tool made of carbide tip.It is one of the earliest machine tool.It is most versatile machine tool.
Lathe Machines:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
9
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 10: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/10.jpg)
Lathe Machines:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
10
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 11: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/11.jpg)
Lathe Machines:
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
11
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
![Page 12: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/12.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
12
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Block Diagram of Lathe:
![Page 13: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/13.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
13
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Centering:
Lathe Operations:
![Page 14: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/14.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
14
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Facing:
Lathe Operations:
![Page 15: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/15.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
15
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Plain Turning:
Lathe Operations:
![Page 16: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/16.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
16
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Step Turning:
Lathe Operations:
![Page 17: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/17.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
17
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Taper Turning:
Lathe Operations:
![Page 18: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/18.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
18
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Drilling:
Lathe Operations:
![Page 19: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/19.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
19
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Reaming:
Lathe Operations:
![Page 20: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/20.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
20
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Boring:
Lathe Operations:
![Page 21: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/21.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
21
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Threading:
Lathe Operations:
![Page 22: MPPS 01_Lathe Machine](https://reader037.fdocuments.net/reader037/viewer/2022103016/555b9c76d8b42a6e588b488f/html5/thumbnails/22.jpg)
PRESENTED BY: PRASHANT JADHAV (DEPT. OF MECH. ENGG.), SJCET, PALGHAR
22
MPPS ST. JOHN COLLEGE OF ENGINEERING & TECHNOLOGY
(DEPT. OF INFORMATION TECHNOLOGY)
Knurling:
Lathe Operations: