MPLED USA FENESTRATION SYSTEMS (PRESAL)files.sitebuilder.name.tools/01/e3/01e38167-ca2a... · 3-33...
Transcript of MPLED USA FENESTRATION SYSTEMS (PRESAL)files.sitebuilder.name.tools/01/e3/01e38167-ca2a... · 3-33...
MPLED USA - FENESTRATION SYSTEMS
(PRESAL)
MPLED PRESAL LLC - Fenestration Systems is a company with a team of engineers, architects, skilled installers and project manag-ers specializes in windows, glass railings, store fronts, glass cano-pies, glass/aluminum facade, window wall and curtain wall systems.Let us put our experience to work for you.
From design to installation, we oversee your project every step of the way, while offering a wide range of products to ensure perfec-tion.
All our aluminum products are made not from recycled but pure aluminum, that fact ensures highest quality and endurance of each our fenestration product, double or triple glazing with laminated
and tempered glass only . We want to stress the fact that every
aluminum fenestration system of our own have a multiple thermal breaks which allow us to pass highest US test rates which lead
us
to
the high rise building be our perfect place to show all greatness
of MPLED PRESAL.
We developed our own brand named “Presal Windows” all made in our factory in Europe, shipped by fast tracks overseas, delivered at the job site and ready for installation within just 20 days or even just 9 days if it’s necessary is a dynamic that we follow. Having a production team and factory of our own gives a full control over the tight manufacturing dead lines.
Our commitment to quality and efficiency is rule number one in our teams, both here and in Europe to provide greater value for each project.
Our very own engineering department along with installation team will conduct all necessary field measuring and also will provide manufacturers shop drawings for review and approval prior to fabrication.
MPLED PRESAL LLC is a leading company because of our work ethic with one goal to become partners with our all associates.
ABOUT US
1.
Frame2.
Sash
or
wing3.
Glazing
bead4.
Glass5.
EPDM
gasket
Aluminum profiles without thermal break (cold profiles) are mainly used for interiors and buildings where heat insulation is not a requirement.With wide range of profiles, fittings and gaskets there is possibility of performance of various structural characteristics.
Common features:- possibility of different types of opening- Fittings for Euro groove- Seal or EPDM gasket of peroxide vulcanization- Primary aluminium, alloy EN AW -6060- Surface protection: anodization or powder coating and decoration with sublimation technology
#3
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITHOUT THERMAL BREAK
#4
P 45 MILL
Technical features
Frame depth:
40
mm
Sash depth:
48
mm
Overlap dimension:
8
mm Infill
depth:
3-28
mm Euro
groove
Technical
features
Frame
depth:
45
mmSash
depth:
53
mmOverlap
dimension:
8
mm Infill
depth:
3-33
mm Euro
groove
P Z 40
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITHOUT THERMAL BREAK
Technical
featuresFrame
depth:
50
mmSash
depth:
58
mmOverlap
dimension:
8
mm Infill
depth:
3-38
mm Euro
groove
Technical
featuresFrame
depth:
45
mmSash
depth:
53
mmOverlap
dimension:
8
mm Infill
depth:
3-31
mm Groove
24
mm
#5
P 45 DALMO
P
Z
50
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITHOUT THERMAL BREAK
#6
Technical features• Wooden and aluminium sash for partition wall in
range:
100
to
250
mm.
•
wide
range
of
colors
and
designs•
various
sashes/wings
(wood,
aluminium,
glass
or
panel)•
can
be
fitted
into
partition
walls•
mainly
used
for
offices
and
meeting
rooms,
schools,
hospitals,etc
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITHOUT THERMAL BREAK
P AD60
Technical featuresFrame depth: 60 mmSash depth: 60 mmInfill depth: to 26 mmEuro groove
FEAL BLIND is intended for production of windows and doors reinforced with a filling made of steel plates thickness 4mm, impenetrable or resistant on ammunition 9mm Luger with the appearance of debris according to EN 1522 FB2(S). This product is used for banks and other objects of higher impor-tance where is necessary to achieve a high degree of safety.
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITHOUT THERMAL BREAK
#7
1. Frame 2. Sash3. Glazing bead4. Isolation glass5. EPDM gasket6. Thermo infill XPE7. Thermo infill XPS8. Polyamide 6.6 (rein- forced with a glass fibre 25%)
Profiles
with
thermal
break
system
From
the
inquiry
for
reduction
of
energy
losses
through
exterior
walls,
windows
and
doors arose
the
need
for
more
energy-efficient
systems.
Common characteristics:- Different angles of opening-
Euro
groove
and
16/9
groove
-
EPDM
quality
gasket-
Primary
aluminium,
alloy
EN
AW
-
6060
-
Surface
protection:
anodization
or
powder
coating and decoration with sublimation technology-
Assembly
of
two
–colored
profiles
#9
#8
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
P Termo 50
Technical featuresFrame depth: 50 mmSash/wing depth: 58 mmOverlap dimension: 8 mmInfill depth: 6-36 mmPolyamide sticks: 14,8 mmEuro groove
Calculation of thermal transmittance Uw According
to
prEN
10077-2
dimensions
of windows
are
1230x1480
mm
(Ug=0.6
W/m2K)
Uw=1.6
[W/m2K]
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITH THERMAL BREAK
#9
PTermo 60
Technical featuresFrame depth: 68 mmSash/wing depth: 68 mmOverlap dimension: 8 mmInfill: 6-48 mmEuro groove and 16/13 groove
Calculation of thermal transmittance UwAccording to prEN 10077-2 dimensions ofwindows are 1230x1480 mm (Ug=0.6 W/m2K)
Uw=1.2 [W/m2K]
SYSTEM FOR WINDOWS AND DOORS WINDOWS AND DOORS WITH THERMAL BREAK
#10
P Termo 65
Technical featuresFrame depth: 65 mmSash/wing depth: 73 mmOverlap dimension: 8 mmInfill depth: 21-50 mmPolyamide sticks: 22 mmEuro groove
Calculation of thermal transmittance Uw According to
prEN
10077-2
dimensions
of windows
are
1230x1480mm
Ug=0.6
W/2K
Uw=1.3
[W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#11
P Termo 65 Utor/Groove 16/9//
Technical
featuresFrame
depth:
65
mmSash/wing
depth:
73
mmOverlap
dimension:
8
mmInfill
depth:
21-50
mmPolyamide
sticks:
22
mmGroove
16/9
mm
Calculation
of
thermal
transmittance
Uw According
to
prEN
10077-2
dimensions
of windows
1230x1480mm
Ug=0.6
W/m2K
Uw=1.3
[W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#12
P Termo 85
Technical featuresFrame depth: 77 mmSash/wing depth: 85 mmOverlap dimension: 8 mmInfill depth: 30-64 mmPolyamide sticks: 34 mmEuro groove
Calculation of thermal transmittance Uw According to prEN 10077-2 dimensions of windows1230x1480mm Ug=0.6 W/m2K
Uw=1.1 [W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#13
P Termo 85 Utor/Groove 16/9/
Technical featuresFrame depth: 77 mmSash/wing depth: 85 mmOverlap dimension: 8 mmInfill depth: 30-64 mmPolyamide sticks: 34 mmGroove 16/9 mm
Calculation of thermal transmittance Uw According to prEN 10077-2 dimensions of windows1230x1480mm Ug=0.6 W/m2K
Uw=1.1 [W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#14
P
Termo
85
Technical featuresFrame depth: 82,5 mmSash/wing depth: 91 mmOverlap dimension: 8 mmInfill max: 44 mmEuro groove
Calculation of thermal transmittance Uw According to prEN 10077-2 dimensions of windows1230x1480mm Ug=0.6 W/m2K
Uw=1.0 [W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#15
P Termo 85 S Plus
Technical featuresFrame depth: 85 mmSash/wing depth: 93 mmOverlap dimension: 8 mmInfill max.: 74 mmEuro groove
Calculation of thermal transmittance Uw According to prEN 10077-2 dimensions of windows are 1230x1480mm Ug=0.6 W/m2K
Uw=0.8 [W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#16
P Termo 75DA
Technical featuresFrame depth: 76,5 mmSash/wing depth: 97,5 mmInfill.: 44 mmPolyamid sticks: 18 mmGroove 16/13
Calculation of thermal transmittance Uw According to prEN 10077-2 dimensions of doors are 1100x2200 mm Ug=0.6 W/m2K
Uw=1.0 [W/m2K]
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#17
RAL-
window
installation
mainly
targets
the
proper
installation
and
energy
savings,
in
order
to
prevent
the
negative
appearance
of
moisture
and
its
consequences.
According
to
the
RAL
installation
should
provide: -
A
combination
of
joinery
and
wall
(gap)
should
be
maintained dry
- Window should be positioned at the correct line of isotherms-Especially
the
inside,
should
prevent
the
flow
of
water
vapor
in
the
insulation
(water
and
vapor
proofing
from
the
inside
to
the
inter
space)-From
the
outside
should
prevent
the
entry
of
liquid
water
or
rain
penetration
(waterproofing
outside
to
the
interspace)-to
provide
ease
escape
of
the
water
vapor
from
the
space
between
to
the
atmosphere
(water
vapor
transmission
from
the
space
between
to
the
outside )
P RAL installation
1. Window sill with stopper
2. Waterproofing (waterproof and va-por-proof foil) - to protect the insulation and compound of the external circuit of the liquid
3. Elements of instal- lation
4. Vapor barrier (vapor and waterproof foil) - to prevent passage of water and water vapor from the premis- es in thermal insulation and compound
5. Internal processing and final appearance
SYSTEM FOR WINDOWS AND DOORSWINDOWS AND DOORS WITH THERMAL BREAK
#18
P Termo 65 VS
Technical
featuresFrame
depth:
65
mm
Sash/wing
depth:
65
mmPolyamid
sticks:
18
mm
Infill
max.:
51.5
mm
Calculation
of
thermal
transmittance
Uw According
to
prEN
10077-2
dimensions
of doors
are
1100x2200
mm
Ug=0.6
W/m2K
Uw=1.7
[W/m2K]
SYSTEM FOR DOORSDOORS WITH THERMAL BREAK
#19
P Termo 65 VP
Technical
featuresFrame
depth:
65
mm
Sash/wing
depth:
65
mmPolyamide
sticks:
18
mm
Infill
max.:
49
mm
Calculation
of
thermal
transmittance
Uw According to prEN 10077-2 dimensions of doors
are
1100x2200
mm Up=0.65
W/m2K
Uw=1.5
[W
/
m2K]
SYSTEM FOR DOORSDOORS WITH THERMAL BREAK
#20
P Termo 85 VS
Technical featuresFrame depth: 85 mmSash/wing depth: 85 mmPolyamide sticks: 45, 34 mmInfill max.: 74 mm
Calculation of thermal transmittance Uw According
to
prEN
10077-2
dimensions
of doors
are
1100x2200
mm
Ug=0.60
W/m2K
Uw=1.1
[W/m2K]
SYSTEM FOR DOORSDOORS WITH THERMAL BREAK
#21
P Termo 85 VP
Technical
featuresFrame
depth:
85
mmSash/wing
depth:
85
mmPolyamide
sticks:
45,
34
mmInfill
max.:
74
mm
Calculation
of
thermal
transmittance
Uw According
to
prEN
10077-2
dimensions
of doors
are
1100x2200
mm
Up=0.65
W/m2K
Uw=1.2
[W/m2K]
SYSTEM FOR DOORSDOORS WITH THERMAL BREAK
#22
Depth
P Harmo/Sliding/
Technical
features
Technical featuresFrame depth: 120 mm (5 tracks or rails)Sash/wing depth: 18 mmInfill depth: 8 - 10 mm
FR-18 sliding glass wall with no visible verticals***
:83mm with three rails and 47mm with two rails Sash depth: 28mm Infill depth 4-18mm
SYSTEM FOR WINDOWS AND DOORSSLIDING SYSTEMS
#23
P Termo 80 /Sliding/
Technical features
Frame depth: 124 mm for three sliding walls80 mm for two sliding wallsSash/wing depth: 32 mmInfill depth: 4 - 18 mm
SYSTEM FOR WINDOWS AND DOORSSLIDING SYSTEMS
#24
P Termo 120 /Sliding/
Technical features
Frame depth: 185 mm for three sliding walls120 mm for two sliding wallsSash/wing depth: 50 mmInfill depth: 3 - 30 mmUw ≥ 1.5 W/m2K
SYSTEM FOR WINDOWS AND DOORSSLIDING SYSTEMS
#25
P Termo 120-D+ /Sliding/
Technical features
Frame depth: 126mmSash/wing depth: 56 mmInfill depth: 44 mmThreshold height: 20mmUw ≥ 1.4 W/m2K
SYSTEM FOR WINDOWS AND DOORSSLIDING SYSTEMS
#26
P Sliding
Technical features
Frame depth: 156 mmSash/wing depth: 70 mmInfill depth: 18 - 57 mmUw ≥ 1.2 W/m2K
SYSTEM FOR WINDOWS AND DOORSSLIDING SYSTEMS
#27
P Termo 150 /Sliding/***
Technical features:
Frame depth: 150 mmSash/wing depth: 67 mmInfill depth: 14-54 mmUw ≥ 1.2 W/m2K
SYSTEM FOR WINDOWS AND DOORSSLIDING SYSTEMS
#28
#29
1. Mullion2. Transom3. Opening in facade4 Glass5. Pressure profile6. Mullion profile covers7. Transom profile covers8. Thermo infill
Aluminium facadesModern architectural solutions, primarily for the representative office buildings and wider, with more glass surface in making the exterior fa-cades are conditioned to offer our complete whole spectrum of the aluminum facade of the continu-ous, semi-structural and structural to the element facade.
Continuous glass facades are formed so that the panes or glass area visibly separate horizontal and vertical beams (al. profiles that are in full size visible on the facade) forming a grid with glass surfaces or panes.
Common features: -primary aluminium , alloy EN AW - 6060 -surface protection is anodizing or powder coat-ing and decoration with sublimation technology - EPDM gaskets (peroxide vulcanization)
FACADE SYSTEMS CURTAIN WALLS
#30
P 60 K
P 50 FK
Technical featuresMullion depth: 88 - 270 mmMullion width: 60 mmVisible cap width: 60 mmUw ≥ 0.7 W/m2K
Technical featuresMullion depth: 88 - 200 mmMullion width: 50 mmCap width: 50 mmUw ≥ 0.7 W/m2K
FACADE SYSTEMS CURTAIN WALLS
#31
1. Mullion2. Transom3. Opening(s) in facade4 Glass5. Polyamide
Structural facades close the entire façade or front-age of buildings or parts thereof.In addition to the aesthetic effect (an object com-pletely dominated by the glass), these facades are extremely functional - providing protection from the atmospheric impact, noise and excellent ther-mal protection.Glass is fixed to aluminium frames that meet grid or raster of the aluminium subconstructionto provide the external facade made entirely of glass.
Common features: -primary aluminium , alloy EN AW - 6060 -surface protection: anodizing or powder coating and decoration with sublimation technology -EPDM gaskets (peroxide vulcanization)-polyamide sticks
FACADE SYSTEMSSTRUCTURAL FACADES
#32
P 60 S
P 50 FS
Technical featuresMullion depth: 88 - 270 mmMullion width: 60 mmVisible groove: 20 mmUw ≥ 0.7 W/m2K
Technical featuresMullion depth: 88 - 200 mmMullion width: 50 mmVisible groove: 20 mmUw ≥ 0.7 W/m2K
FACADE SYSTEMSSTRUCTURAL FACADES
#33
1. Mullion2.Ttransom3.Opening(s) in facade4.Glass 5. EPDM gasket
Semistructural facades in opposite to curtain walls have less emphasized aluminium visible part of the outer side. The main difference from curtain walls is in that for every glass field special frame is assembled and later mounted in existing structure. Width of FEAL’s semi structural facade is 50mm for 50 PS facade. Depth of mullion and transom is determined by static calculation.
FACADE SYSTEMSSEMISTRUCTURAL FACADES
#34
P 50
PS
Technical featuresMullion depth: 93 - 163 mmMullion width: 50 mmVisible groove: 18 mmUw ≥ 4.7 W/m2K
FACADE SYSTEMSSEMISTRUCTURAL FACADES
#35
Following the new trends in the construction of build-ings that requires shortest possible time of construct-ing and assembling and therefore facades on them, FEAL developed a new type of element facade 70E..
Main features of this facade are:1. Construction width of the profile is 70 mm2. Possibility of structural and semi structural versions3. Manufacture of elements is completely performed in the plant4.Manufacture of prefabricated or finished elements shortens the time required for facade assembling.
Technical featuresMullion depth: 143 - 205 mmMullion width: 70 mmVisible groove: 20 mm
Uw ≥ 1.7 W/m2K
P 70 E
FACADE SYSTEMSELEMENT FACADE
#36
Double skin facade
Double skin facade is composed of two glass fa-cades which separates the ventilation gap or area . This facade solution offers a number of advan-tages to a longer shelf life to the use of the solar energy for heating. The sun is the main cause of warming during the summer, which penetrates through glass surfaces excessively warming rooms in which we live, and this facade allows us to prevent that warming or to use it.The biggest advantage of the double over the single facade is in less energy for cooling or heating of the build-ing.
FACADE SYSTEMSDOUBLE SKIN FACADES
#37
P Stone facade
Ventilated facades are mainly used as an addi-tional cover for concrete walls, brick walls and other surface for better insulation and improved esthetics. Different requirements of our custom-ers have driven us to develop various solutions for ventilated facades.
Technical featuresAluminium subconstructionStone tile thickness: 20, 25 and 30 mmGap between tiles: 10 mmHorizontal span of subconstruction: 600, 900 and 1200 mm
Invisible clasps
Visible clasps
FACADE SYSTEMSVENTILATED FACADES
#38
P Alucobond facade
Technical features:Aluminium subconstructionPanel thickness: 4 – 6 mm
FACADE SYSTEMSVENTILATED FACADES
When the need to expand the living space arises or wish to provide space for recreation winter garden is ideal solution. Connecting of indoor living space with nature - outdoor space is the main characteristic of this system.Aluminium profiles with thermal barrier, combined with insulated glass will make your stay pleasant in these areas throughout the year. Lots of light that allow large glass surfaces brings into the in-terior space required solar energy. Although construc-tion of winter gardens have their benefits at any time of the year, however, during the winter period, they are the most prominent ones.
WINTER GARDEN
#39
P Fixed sun breakers
Technical featuresDimension of slats: 112,5 , 118and 149 mm
Sun breakers are usually utilized for bigger areas, even on whole perimeter of curtain walls. These products have a more solid structure than louver shutters and can be fixed and adjustable. Adjustable sunbreakers can be oriented horizontally and vertically and they are driven by motor which can be controlled by switch or remote controller.
SUN PROTECTIONSUN BREAKERS
#40
P Fixed shutters
Fixed shutters are suitable for the ventilation of space, control in passing of light, privacy, protection from weather conditions and others. They are made with slats in frame and used for installation on the facade and directly on the wall.
Technical features Installation: in frameHeight of frame: 70 i 150 mmWidth of frame: 42,5 i 105 mm
SUN PROTECTIONFIXED SHUTTERS
#41
P PF-100 S Partition walls
A part of MPLED's offer is decoration of internal space/interior design. As basic product of such usage is partition wall of the PF-100 series. Depth of 100 mm with suitable infill will completely satisfy con-cerning the acoustic and aesthetic of the modern interiors. The PF-100 system is the most suitable for offices, banks, libraries and all other areas and spaces where we want to show the size and luxury of living.
Technical features- Depth of partition: 100mm- Depth of infill: 4-11mm-Installation on the finished floor
OTHER SERIES
#42
P PF-100Partition walls
Technical featuresFrame depth: 100 mmInfill depth: 3 – 17 mm
OTHER SERIES
#43
P OF 60/Fence/
Aluminium fences are systems made of aluminium profiles (bars) and fittings/binding elements which combined together can offer different fence solutions. These systems are commonly used for railings, terraces and balustrades. Aluminium construc-tion profiles are combined with glass and other materials for infill which offers different shapes and designs of fences. Also, there is a wide range of available colors and finishes depending on customer’s choice. Beside the aesthetic advantages, these systems are easily installed, light weight, have high safety char-acteristics and high corrosion resistance. Feal aluminium fences require minimum or no maintenance throughout a long period of time.
Common characteristics:-primary aluminium, alloy EN AW - 6060-surface protection with anodizing or powder coating and deco-ration with sublimation technology
Technical features:Infill elements: slats and glass
OTHER SERIES
#44
P
OF-100/Fence/
OTHER SERIES
#45
MPLED USA (PRESAL) LLC180 Talmadge Rd,
Edison, NJ 08817Tel: +1(347) 625-0121 ; Fax: +1(732) 9026459 Cell: +1 (646)509-5308;
+1 (917) 889-4838 email: [email protected];
www.mpled.us
Presal Windows | Aluminum extrusions | Aluminum profiles