7/25/2019 MPAP_MU16069_en sifter.pdf

1/8

MPAP

Plansifter

7/25/2019 MPAP_MU16069_en sifter.pdf

2/8

Application

This plansifter has been designed for the sifting

of granular and floury products as well as for the

sorting of differentproducts in wheat, rye, corn (maize)

and buckwheat mills. In addition, the plansifter is

applied as control sifter in flour storage systems ahead

of bagging and bulk loadout.

Features

Maximum 84m2net sieve area

High sifting capacity; the clearance abovethe sieves is adjusted to suit the product volume

by using different frame heights and

intermediate frames

Sturdy, simple drive

Up to 26 sieves per compartment

Sieve frames of synthetic-resing-coated wood

Excellent sanitation

Easy access for cleaning

Minimized maintenance

Drive with built-in motor

The sturdy drive ensures trouble-free operation of the

plansifter. The adjustability of the centrifugal weights allows

the throw of the sifter to be set to the optimum value

The centrifugal weights are supported by sturdy

self-aligning roller bearings with grease lubrication,

resulting in low maintenance

Range of models

The plansifter is available with 4, 6 or 8 compartments

all of the same height accommodating max. 26 sieves.

Excellent sifting.

End products of top quality.

Plansifter MPAP. Large sifting area

in a minimum space.

2

Dismantling for shipping.After

shipping the three box sections can

quickly and easily be bolted together.

7/25/2019 MPAP_MU16069_en sifter.pdf

3/8

Higher sifting capacity.

Minimum space.

3

Plansifter MPAP.

Efficient sifting thanks to dynamic forces.

7/25/2019 MPAP_MU16069_en sifter.pdf

4/8

Trouble-free operation.

Less maintenance.

4

Compartments

The inside of the sieve compartments is of simple design.

The continuous door retains the sieve stack in place by

means of robust locks. The product-carrying channels

are easily accessible and can therefore be cleaned with

minimum effort. The sieve frames are easy to install and

remove.

The sieve stack can be easily and securely clamped with

an easy-to-operate clamping device.

7/25/2019 MPAP_MU16069_en sifter.pdf

5/8

NOVA sieve.

Type B (wide).

NOVA sieve.

Type N (normal).

NOVA sieves features

Higher sifting capacity in a given space

Combined NOVA cleaners for the sieve cover and

the sieve tray

Wood sieve frames coated with synthetic resin without

corrugated wire mesh

Wear-resistant metal insert frames

Sieve covers glued onto metal insert frames

Direct access to the cleaners without the need for tools

Minimum maintenance for cleaning the sieves

Sieve cleaners

The mult i-arm cleaner constructed of special synthetic

material travels on its center foot across the entire sieve tray.

From here, the cleaner tips to the outer feet and the sieve

is cleaned in all corners. The arms located on the opposite

cleaner side tap against the sieve cover cleaning it.

More sifting area

Efficient sieve cleaning

Consistentsifting capacity

Optimum spaceutilization

5

Sieve generation NOVA.

Outstanding sifting efficiency.

The two sieve frame types N (normal) and B (wide) allow

optimum adjustment of the sifting area to the amount of

stock and to the number of separations.

NOVA sieve with combined NOVA cleaners.

7/25/2019 MPAP_MU16069_en sifter.pdf

6/8

6

Examples of sifter schemes

show the stock flows:

awith normal frame type N, horizontally

divided

bwith wide frame type B, twin flow

on primary sieves

c combined with wide frame (B) and

normal frame (N), horizontally divided

Working principle

The stock to be sifted is fed through one

or more inlets via the inlet frame to the sieve

stack. Different sieve frame types allow

up to seven separations. The individual

fractions are directed via channels in

the sieve housing and in the sieve frames to

the outlet frame. This frame directs the

collected stock to the spouts in the bottom

plate. Inspection spouts under the plansifter

allow the stock to be inspected with ease.

Example of sorted stock after

the plansifter:

Coarse break stocks

Fine break stocks

Semolina

Middlings

Flour

Break stocksfrom

the roller mill ahead of

the plansifter.

2

1

3

4

5

7/25/2019 MPAP_MU16069_en sifter.pdf

7/8

A B C D E F G H J K L M N O P Q R

2300 3420 1741 2593 3457 3648 2793 1938 808 876 856 430 1900 735 470 280 1000MPAP

min.

MPAP-426 4 26 34.3 42.0 5.5 3700 4450 4800 18.5

MPAP-626 6 26 51.5 63.0 7.5 4700 5500 6000 25.6

MPAP-826 8 26 68.6 84.0 11 5720 6600 7220 32.7

Higher sifting capacity.

Minimum space.

7

min.

Tecnical data

Dimensions in mm

Type

Approx. weights in kg

(including motor)

Volume of

seaworthy

packing

in m3

Type

net gross by sea

Motor

kW

Max. Net sieve area

in m2

Sieve type N Sieve type B

Numberof sieve

compart-ments

Max.Numberof sievesper com-partment

7/25/2019 MPAP_MU16069_en sifter.pdf

8/8

Bhler AG

CH-9240 Uzwil, Switzerland

T+41 71 955 11 11

F +41 71 955 66 11

www.buhlergroup.com

MU

160690620092000en