Move or Migrate User Accounts From Old Linux Server to a New Linux Server
Transcript of Move or Migrate User Accounts From Old Linux Server to a New Linux Server
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 1/22
Main menu
BASH Shell
Linux
CentOS
Debian / Ubuntu
Ubuntu Linux
Suse
RedHat and Friends
Slackware LinuxUNIX
AIX
Mac os x
FreeBSD
FreeBSD Jails (VPS)
Openbsd
Solaris
Troubleshooting
NginxNetworking
MySQL
See all tutorial topics
BlogAbout
Contact us
Forum
RSS/FEED
Linux FAQ / Howtos
Move or migrate user accounts from old Linuxserver to a new Linux server
by nixCraft on December 13, 2006 83 comments last updated at August 16, 2007
Q. How do I Move or migrate user accounts to from old Linux server a new Cent OSLinux server including mails? This new system a fresh installation.
A. You can migrate users from old Linux server to new Linux sever with standard
commands such as tar, awk, scp and others. This is also useful if you are using old
Linux distribution such as Redhat 9 or Debian 2.x.
Following files/dirs are required for traditional Linux user management:
* /etc/passwd - contains various pieces of information for each user account
* /etc/shadow - contains the encrypted password information for user's accounts and optional the password
aging information.
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 2/22
* /etc/group - defines the groups to which users belong
* /etc/gshadow - group shadow file (contains the encrypted password for group)
* /var/spool/mail - Generally user emails are stored here.
* /home - All Users data is stored here.
You need to backup all of the above files and directories from old server to new Linux server.
Commands to type on old Linux system
First create a tar ball of old uses (old Linux system). Create a directory:
# mkdir /root/move/
Setup UID filter limit:
# export UGIDLIMIT=500
Now copy /etc/passwd accounts to /root/move/passwd.mig using awk to filter out system account (i.e. only
copy user accounts)# awk -v LIMIT=$UGIDLIMIT -F: '($3>=LIMIT) && ($3!=65534)' /etc/passwd >
/root/move/passwd.mig
Copy /etc/group file:
# awk -v LIMIT=$UGIDLIMIT -F: '($3>=LIMIT) && ($3!=65534)' /etc/group >
/root/move/group.mig
Copy /etc/shadow file:# awk -v LIMIT=$UGIDLIMIT -F: '($3>=LIMIT) && ($3!=65534) {print $1}' /etc/passwd
| tee - |egrep -f - /etc/shadow > /root/move/shadow.mig
Copy /etc/gshadow (rarely used):# cp /etc/gshadow /root/move/gshadow.mig
Make a backup of /home and /var/spool/mail dirs:# tar -zcvpf /root/move/home.tar.gz /home
# tar -zcvpf /root/move/mail.tar.gz /var/spool/mail
Where,
Users that are added to the Linux system always start with UID and GID values of as specified byLinux distribution or set by admin. Limits according to different Linux distro:
RHEL/CentOS/Fedora Core : Default is 500 and upper limit is 65534 (/etc/libuser.conf).Debian and Ubuntu Linux : Default is 1000 and upper limit is 29999 (/etc/adduser.conf).
You should never ever create any new system user accounts on the newly installed Cent OS Linux. Soabove awk command filter out UID according to Linux distro.
export UGIDLIMIT=500 - setup UID start limit for normal user account. Set this value as per yourLinux distro.awk -v LIMIT=$UGIDLIMIT -F: '($3>=LIMIT) && ($3!=65534)' /etc/passwd >
/root/move/passwd.mig - You need to pass UGIDLIMIT variable to awk using -v option (it assignsvalue of shell variable UGIDLIMIT to awk program variable LIMIT). Option -F: sets the field
separator to : . Finally awk read each line from /etc/passwd, filter out system accounts and generatesnew file /root/move/passwd.mig. Same logic is applies to rest of awk command.
tar -zcvpf /root/move/home.tar.gz /home - Make a backup of users /home dirtar -zcvpf /root/move/mail.tar.gz /var/spool/mail - Make a backup of users mail dir
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 3/22
Use scp or usb pen or tape to copy /root/move to a new Linux system.# scp -r /root/move/* [email protected]:/path/to/location
Commands to type on new Linux system
First, make a backup of current users and passwords:
# mkdir /root/newsusers.bak
# cp /etc/passwd /etc/shadow /etc/group /etc/gshadow /root/newsusers.bak
Now restore passwd and other files in /etc/
# cd /path/to/location
# cat passwd.mig >> /etc/passwd
# cat group.mig >> /etc/group
# cat shadow.mig >> /etc/shadow
# /bin/cp gshadow.mig /etc/gshadow
Please note that you must use >> (append) and not > (create) shell redirection.
Now copy and extract home.tar.gz to new server /home
# cd /
# tar -zxvf /path/to/location/home.tar.gz
Now copy and extract mail.tar.gz (Mails) to new server /var/spool/mail
# cd /
# tar -zxvf /path/to/location/mail.tar.gz
Now reboot system; when the Linux comes back, your user accounts will work as they did before on old
system:# reboot
Please note that if you are new to Linux perform above commands in a sandbox environment. Abovetechnique can be used to UNIX to UNIX OR UNIX to Linux account migration. You need to make couple
of changes but overall the concept remains the same.
Further readings
Read man pages of awk, passwd(5), shadow(5), group(5), tar command
Updated for accuracy.
Tweet13
Like 11
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 4/22
You should follow me on twitter here or grab rss feed to keep track of new changes.
Featured Articles:
30 Handy Bash Shell Aliases For Linux / Unix / Mac OS XTop 30 Nmap Command Examples For Sys/Network Admins
25 PHP Security Best Practices For Sys Admins
20 Linux System Monitoring Tools Every SysAdmin Should Know20 Linux Server Hardening Security Tips
Linux: 20 Iptables Examples For New SysAdmins
Top 20 OpenSSH Server Best Security Practices
Top 20 Nginx WebServer Best Security Practices20 Examples: Make Sure Unix / Linux Configuration Files Are Free From Syntax Errors
15 Greatest Open Source Terminal Applications Of 2012
My 10 UNIX Command Line Mistakes
Top 10 Open Source Web-Based Project Management SoftwareTop 5 Email Client For Linux, Mac OS X, and Windows Users
The Novice Guide To Buying A Linux Laptop
{ 82 comments read them below or add one }
1 podee December 21, 2006 at 4:00 am
Hi
I followed your instuction on CentOS 4.4. When I reboot I lost my root user and gdm dint start.
I could login from all user but not root.Can you help to give me some advices please?
Pordee
Reply
2 nixcraft December 21, 2006 at 7:59 am
You made mistake somewhere. But dont worry you can login into single user mode (rescue mode)
and reset root account password.
http://www.cyberciti.biz/faq/linux-reset-forgotten-root-password/
Reply
3 ssdon January 2, 2007 at 10:25 pm
Great! The following line is probably a typo as Im assuming you mean to back this up with a copy,
otherwise you nuke the password files (probably what happened to nixcraft)
# mv /etc/passwd /etc/shadow /etc/group /etc/gshadow /root/newsusers.bak
# cp /etc/passwd /etc/shadow /etc/group /etc/gshadow /root/newsusers.bak
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 5/22
Reply
4 nixcraft January 3, 2007 at 1:50 am
ssdon,
Typo has been fixed.
Appreciate your feedback.
Reply
5 Tom January 3, 2007 at 2:17 am
There is an error in the article. In the step where you back up the passwd, group, shadow, and
gshadow files from the new system to the newuser.bak directory, use the cp command, not mv.
In other words, the article should read:
Commands to type on new Linux system
First, make a backup of current users and passwords:# mkdir /root/newsusers.bak
# cp /etc/passwd /etc/shadow /etc/group /etc/gshadow /root/newsusers.bak
Reply
6 Bud January 15, 2007 at 5:50 pm
Your instructions worked perfectly when migrating accounts from Redhat 4ES to another Redhat 4ES.
I added a couple of steps to move all the aliases and aliase folders to the new server. Thanks
Reply
7 Oduor Sam January 21, 2007 at 8:09 pm
Thanks,I am looking for a payrise after rescuing a dying server. It has worked for me perfectly.
Reply
8 Rick January 31, 2007 at 3:34 am
It may sound complicated, however, I am much more happy to do this with Linux than with
Mickey$oft O/Ss, in fact, I am much more happy to do ANYTHING with Linux over Windoze!
Reply
9 _ranger_ January 31, 2007 at 12:38 pm
If you had used LDAP for user accounts, then you wouldnt have needed to migrate user accounts .
Also, you could skip the whole tar aspect by just using rsync, e.g. rsync -e ssh -avtP /home/
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 6/22
newserver:/home
Reply
10 Charles Witt January 31, 2007 at 2:55 pm
Thanks for the howto. This is really close to what I have been looking for. In my particular situation
LDAP and NIS do not fit as well as your howto does. Also thanks for the comments of everyone, asthey are helpful.
Reply
11 exi February 5, 2007 at 1:14 pm
you might wanne consider runing sshfs on your new server, then u can login to the old (if sshd is
running) and simply copy the requierd data true fx. mc, and get all the file rights w you
its fast is simpel, and you only need to have secure shell intstalled on the old box`s to make it work
(and most boxses have ;)
just a littet advice for the data moving part.
Reply
12 Phil February 9, 2007 at 7:45 am
I have a problem, for starters, it look lie I was kind of doing the right thing myself but this blog really
helps, thanks. Anyway everything works fine untill I get to the bit where I am extraction all the users
data from the home.tar.gz. (kind of important bit) and it fails with text flying up the screen saying
Cannot change ownership to uid 511, gid 511 and Cannot mkdir: Permission denied and Cannotopen: Permission denied
obviously I do not have permissions :o(
I am loged in as root and the home directory of the new server has these permissions:
drwxrwxrwx 12 root root 0 Feb 8 19:28 home
Im not sure how it is possible to obtaim more permissions than that. I have tried with other privilages
on the home directory and it still does it.
PLease can someone help me
Many thanks
Phil
Reply
13 GT4NE1 February 14, 2007 at 6:06 pm
Dont forget about migrating cron jobs.
/var/spool/cron
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 7/22
Anything else we havent thought of?
Reply
14 aleksb April 17, 2007 at 9:45 am
Hi!
I tried your howto, and everything went along great until i rebooted and tried to log on with the users i
just copied over. root works fine. The passwords are not accepted, and i cannot change them with
passwd. passwd: Authentication token manipulation error. Im using fedora core 6.
Please help
Aleks
Reply
15 aleksb April 17, 2007 at 9:58 am
Nevermind, figured it out :)
Were missing a statement in the shadow file copy thingamabob
Reply
16 vikrant v mankar April 24, 2007 at 1:23 pm
hi i am new user in linux i am getting every answer from ur site.you are providing great solution on
every problem its being great to refer your site thanks for every thing
Reply
17 Subhanjan July 19, 2007 at 7:07 am
Hi,
I have a small query my new system already has couple of user accounts now I want to transfer the
user accounts from the old system I have checked both the systems there is no conflicts in UID,GID so
shall I go ahead with it.
Subhanjan
Reply
18 Subhanjan July 19, 2007 at 12:38 pm
Hi,
The things worked beautifully for me.
Thanks to the author.One more thing cant I script the steps that are done by the command awk?
Subhanjan
Reply
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 8/22
19 NewLinuxUser August 23, 2007 at 6:13 pm
I was able to migrate the home folders and accounts from RedHad Linx to Fedora but it seems that Icannot log in with the migrated accounts although I am able to see them under USERS. Am I missing
anything? Please help.
Reply
20 Prashantshant August 27, 2007 at 8:02 am
I am very much thankful that I got migration solution of user. How to transfer printer settings of each
user from one m/c to another? we have localy connected the printers to thin clients.
Reply
21 Paul Douglas Franklin September 19, 2007 at 6:30 pm
Thank you so much. This is beautiful. Im trying to upgrade to a new physical box, different distro,switch to ldap, and from Samba 2 to Samba 3. All this without messing up the working server. Ive
messed up the new box several times, and your migration page is very helpful in avoiding mistakes
during this stage. BTW, I used rsync instead of tar for the home directories.
Reply
22 asaguru October 10, 2007 at 10:40 am
now i am using centos 3 in a dell server now in that server i am running sendmail squid and iptables ftp
now i want to migrate the server in to new dell server running in centos 5
please any one help me on this issue
Reply
23 RaM October 30, 2007 at 8:51 am
hi
everyone i have question im a newbie admin can anyone give me advise or help me if how can i
backup my old linux email server III to new one or migrate to cent mail..tnx what are the important files
to back up for linux suse email server III?
Reply
24 Eliena Andrews November 27, 2007 at 10:12 am
hii,
i followed the procedure above, after all steps. USers password is not getting accepted, what could
have went wrong ?
Eliena Andrews
Reply
25 Kevin Smith December 24, 2007 at 10:28 pm
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 9/22
I cut and pasted the commands into an SSH terminal & checked the passwd.mig and shodow.mig to
find they were empty!
I double checked the lines and they were correct (values ect.)
Plus I end up with a file called - which Im guessing comes from the /etc/shadow line tee - (typomaybe?)
Id really like to get this working as it would be quite helpful with my project. My Level is slightly above
newbie Admin.
Kev
Reply
26 mj40 February 6, 2008 at 1:51 am
First of all i just wanna say thank you guys! This is my first time to get into the linux world! .
I follow the instruction regarding how tos .. then after rebooting my new centos5 box error message
appears:
The user database cannot be read. The problem is most likely caused by a mismatch between/etc/passwd and /etc/shadow or /etc/group and /etc/shadow. The program will exit now.
I follow the instructions twice and i got same message error. I dont know how to fix this one. Please
help me
Thanks.
Reply
27 Augusto February 19, 2008 at 8:34 pm
this how to works great :) But now Im stuck i need to migrate from Redhat to Debian the UGIDLIMIT
are different on this distros? any advice ?
thanks
Reply
28 Betty Harvey June 17, 2008 at 12:27 pm
Great instructions easy to follow!!! Worked like a charm!! Thanks for making this available I
have it bookmarked for when I do this again!
Reply
29 Peter Thomson June 18, 2008 at 1:49 am
RE: Augusto need to migrate from Redhat to Debian the UGIDLIMIT are different on this
distros
this advice would be useful for me too. Is it possible to adjust the /etc/passwd and /etc/group files?
Reply
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 10/22
30 Brett Knights June 26, 2008 at 5:38 pm
Thanks, This was very useful.
I needed to move a couple of system accounts
so did this:
awk -F: '($1 ~ /(tomcat|apache)/)' /etc/passwd > /root/move/passwd.mig
awk -v LIMIT=$UGIDLIMIT -F: '($3>=LIMIT) && ($3!=65534)' /etc/passwd >>
/root/move/passwd.mig
and then couldnt figure out what the tee gave me and I was moving a set of users not based on UID
so did this:
awk -F: '{print $1}' /root/move/passwd.mig |egrep -f - /etc/shadow >
/root/move/shadow.mig
HTH
Reply
31 Debbie August 8, 2008 at 8:14 pm
Fabulous! Routine worked great! Thanks for posting it, saved me a ton of time.
Reply
32 Bryan August 26, 2008 at 4:34 pm
Also a couple of commands to check out if you are having problems with User database cannot be
read error: pwconv, grpconv and pwck. Works like a charm now :)
Reply
33 Miro October 16, 2008 at 6:16 pm
OK, I followed instructions got stuck with users not being able to log in. If instructions were not
correct, how do I fix it now?
Reply
34 Alan November 7, 2008 at 11:30 am
Excellent! I followed the instructions and did a fresh install of openSuse 11.0 on to 10.3. I have my old
/home on a separate partition and didnt mount it during install because Suse wants an initial user which
would have overwritten my original first user (UsId=1000). I installed, logged in as root, deleted the
initial user, changed the mount of /home to point to my old /home partition, did the transfer of backed
up passwd files etcetera, rebooted and bingo!
My only worry was, when it came to generating the initial user during install, I had a choice of
encryption algorithms for the password. Obviously if Id chosen the wrong one Id be stuck (though I
could probably log in as root and reset the users passwords).
So my question is: is it possible to tell what encryption algorithm was used for password storage before
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 11/22
starting?
Thanks again for the info.
Alan.
Reply
35 Dominic November 26, 2008 at 10:39 am
I am wanting to mirror users/groups to from one Ubuntu server to another. I see that Ubuntu starts off
with a user with UID 1000 (created with the name you give it in setup), I guess I should not try to
migrate this user since it already exists on the destination machine i.e. I should set UGIDLIMIT=1001?
What if one re-runs this action later to update the mirror? Do users gets duplicated cos surely one gets
multiple entries for same user in /etc/passwd?
Reply
36 Mike December 17, 2008 at 2:31 am
Great Doc. I was able to migrate a CentOS system to a VM.
Reply
37 Ganymede January 9, 2009 at 9:09 pm
My $0.02: For those who are concerned about UIDs and GIDs
you can change UIDs and GIDs on the old system before migration using:
groupmod -g (newgid) groupnameusermod -g (newgid) username OR usermod -G (newgid) username
(g changes the initial group or G to add an additional group membership)
Make a backup of the old files first and then change the group GID then change any appropriate users
attached to those groups if necessary. Test to make sure all is well. You can do this preemptively if youare going to from a system that starts custom groups at 500 to one that starts custom groups at 1000or if you dont want any UID/GID conflicts with your target system. Be the superuser and it would also
be prudent to make the changes while none of the users are attached.
Feel free to pick this post apart.
Reply
38 KPryor January 10, 2009 at 10:41 pm
Very very helpful. Im going to be needing to do this soon and didnt really know how to proceed.
Thanks!KP
Reply
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 12/22
39 Joe Riley February 5, 2009 at 8:19 am
Your FAQ fails to copy over /etc/passwd- as well
in the command:
cp /etc/passwd /etc/shadow /etc/group /etc/gshadow /root/newsusers.bak
should be:
cp /etc/passwd /etc/passwd- /etc/shadow /etc/group /etc/gshadow /root/newsusers.bak
Reply
40 Shawn February 17, 2009 at 4:16 pm
Fantastic instructions. A+++
Thanks.
Reply
41 gczman March 2, 2009 at 3:35 pm
copied the mboxs from one unix box and the /etc/passwd and /etc/shadow and it worked perfectly.thanks
Reply
42 waloyce March 24, 2009 at 4:26 am
Thanks the howto is very useful.But how to migrate the virtual users and domains accounts to a newserver
Reply
43 Denis March 30, 2009 at 5:07 am
Great instructions, worked well for me
BTW, if I had 2 linux servers, do you think it would be possible to merge the accounts into one of the2 ?
Reply
44 roshan April 6, 2009 at 10:30 am
your cp & awk command is so good
Reply
45 fidel April 23, 2009 at 10:44 am
thanks for this small & easy how-to
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 13/22
Worked like a charme
Reply
46 Juan Carlos June 15, 2009 at 2:30 pm
there is something similiar for Solaris ?
Reply
47 Vivek Gite June 15, 2009 at 2:49 pm
@Juan,
Solaris uses the same files /etc/passwd and friends. So it should work with a little modification.
Reply
48 mstone June 16, 2009 at 5:24 pm
Also check for aliases because a common multiple recipients solution uses that technique
Reply
49 Andy July 29, 2009 at 8:00 pm
If you use Samba shares; remember to grab /etc/samba/smb.conf, /etc/samba/smbusers, and/etc/samba/smbpasswd
Reply
50 John Wood April 1, 2010 at 3:51 pm
I was getting a - file created in /root/move when trying to get the shadow.mig, but Im not now, and
Im not sure what I did!
If anyone does get the - file, add some spaces around the tee command and try again Thatswhat I did and it went away!
Reply
51 John Wood April 1, 2010 at 3:55 pm
no, wait, I wasnt looking in the current directory I actually dont get rid of the - file
Reply
52 Lukas Johansson August 17, 2010 at 11:52 pm
Thanks for this guide, managed to migrate a large webserver without any major problem thanks toyou!
Reply
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 14/22
53 Embedded October 6, 2010 at 1:32 pm
Thanks for a great guide.
I have small problem with it.
From some reason the tar commands dont work under Red Hat Linux.it did not manage to tar or untar the files.
Do you know how to skip existing files?I tried -k flag but no success ;/
Reply
54 Ryan October 14, 2010 at 8:42 pm
Everything worked great. All my users & machines show up in User Manager.
However I cannot logon as a user, only root. It says wrong password.
Reply
55 Tim November 29, 2010 at 3:45 am
In Ubuntu, I had a problem following these instructions. When the screensaver was locked, youcouldnt unlock the screen without going to Switch User and then put in the password there. In
addition, half of the time your gdm session would immediately crash and youd have to log in fromscratch again.
The problem was that the shadow user wasnt able to read the /etc/shadow and /etc/gshadow files.The /etc/shadow and the /etc/gshadow files need to be chownd to root:shadow, and chmodd to 640like this:
# chown root:shadow /etc/shadow# chown root:shadow /etc/gshadow
# chmod 640 /etc/shadow /etc/gshadow
Reply
56 Irek May 13, 2011 at 4:16 pm
I tried to move account details from SUSE to Fedora/RH and password is not working :(I
Reply
57 Manojg August 1, 2011 at 11:09 pm
I created account successfully, can login but login take time and gives error:
/usr/bin/xauth: timeout in locking authority file /home/testuser/.Xauthority
Any help?
Reply
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 15/22
58 kaleeswari August 18, 2011 at 6:57 am
how to create the another root user and how to change the root ?
Reply
59 kaleeswari August 18, 2011 at 6:59 am
how to transfer the files from one root to another root user in same system using ubunto or fedora?
Reply
60 Chris September 26, 2011 at 6:07 pm
This worked perfect for me migrating users from an old FC3 box to a new Ubuntu 10.04 LTS one. Idid run into a problem when I tried to do it a second time. The instructions as they are will result induplicate entries in the /etc/passwd file. If you want to do this more than once, the *.mig files will need
some manual massaging before catting into the destination passwd file. (This may go without saying formost of you, but for me it wasnt something I thought of ahead of time). I was able to clean it up, but it
was a pain.
Reply
61 Frank Wang October 12, 2011 at 8:43 am
For the /etc/shadow file, better use following to prevent ambiguous match, say a local account nameddb will also match system account dbus
# awk -v LIMIT=$UGIDLIMIT -F: ($3>=LIMIT) && ($3!=65534) {print $1} /etc/passwd | sed -r -e s/(.*)/^\1:/ | egrep -f /etc/shadow > /root/move/shadow.mig
Reply
62 Paul December 11, 2011 at 8:50 pm
It worked perfect from FC 11 to FC 15. Btw, may I add the fact that the host keys must be
imported/ecported also. Reason: it is possible to have some users which are using their accounts(SFTP) with the help of an automaitc SFTP client. IN order to keep everything transparent for them,
the host keys of the machine must be imported/exported (etc/ssh).Maybe is better to test it and include it in this tutorial. Btw, the a lot for doing this.
Have a nice weekend.
Paul
Reply
63 Montaser Islam December 12, 2011 at 11:59 am
cool post;it save a lot of time man.
Reply
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 16/22
64 tem_dl April 5, 2012 at 3:24 am
cool tip. im using it. :D. tks so much
Reply
65 wfade April 19, 2012 at 8:21 am
oki think that you should awk at the new system for combine the new file that you had cp
Reply
66 AA April 25, 2012 at 12:55 pm
I am migrating accounts between an RHEL 5 server and RHEL 6 server and noticed that etc/gshadow
file entries for even the same group are listed differently between the two servers. For example: ntp:!::on rhel 6 and ntp:x:: on rhel 5. Your wonderful article shows that the gshadow file is copied in itsentirely (as is) from the old server to the new server. This means that the entries on the new server will
be completely replaced. Would it be better to append entries from the original gshadow that dontexist on the new server instead of replacing it with the entire file from the old server? Thanks in
advance.
Reply
67 Francisco Prez May 25, 2012 at 5:27 am
Gracias por su procedimiento:Solo una pequea sugerencia / pregunta:
No sera mejor en lugar de:
Copia el archivo / etc / gshadow (rara vez utilizada):# cp /etc/gshadow /root/move/gshadow.mig
Usar el mismo procedimiento que para shadow?:awk -v LIMIT=$UGIDLIMIT -F: ($3>=LIMIT) && ($3!=65534) {print $1} /etc/group | tee
|egrep -f /etc/gshadow > gshadow.mig
y ya en el nuevo servidor, en lugar de:
# /bin/cp gshadow.mig /etc/gshadow
hacer lo mismo que con los otros archivos:# cat gshadow.mig >> /etc/gshadow
Un saludo afectuoso..
Reply
68 ed June 10, 2012 at 9:38 pm
Great help!
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 17/22
Thanks
Reply
69 Steve Kelem June 26, 2012 at 10:18 pm
Francisco: (My Spanish is good enough to understand you, but not enough to answer)
Your script grabs every user name above UGIDLIMIT and then grabs every matching line fromgshadow.
1. If a user matches the UGID, and is in a group that already exists on the new machine, e.g., adm,disk, lp, man, dialout, lpadmin, then you get two entries for those groups in the new gshadow.
2. There is a small (but non-zero) chance that a users name is a substring of a group that doesntmatch UGID, then you would get false positives: roo, kern, hal, ack, kit, and other 3-letter initials thatsome users might (perhaps unwisely) use. The grep should check for lines with words that match
exactly the usernames.
Reply
70 mark July 8, 2012 at 8:54 pm
I keep getting permission denied when i attempt to create the shadow.mig ???
I added my user to the root group but no difference
-rw-r 1 root shadow 982 2012-04-19 13:28 shadow are my permission group has read
Reply
71 John August 22, 2012 at 4:02 pm
Wow, you know youve got a great tutorial when its copied verbatim by a bunch of others who dontgive one bit of credit to the original.
I have found this on at least 5 other sites with only ONE giving credit to Vivek and cyberciti.biz.
Reply
72 ian scott-fleming August 29, 2012 at 4:07 pm
Is there a reason you use !=65534 instead of =LIMIT) && ($3=LIMIT) && ($3
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 18/22
Great post! Thanks for this :-)
Reply
74 PhilipV October 19, 2012 at 2:50 am
I did it successfully. Thanks.
Reply
75 dali October 29, 2012 at 3:57 pm
think you..
Reply
76 Jeremy December 12, 2012 at 4:46 pm
I followed your instructions to migrate from redhat kernel 2.4 to centos 6 and for the most part, theyworked great. The only problem I am experiencing is when I go into the user manager I get the error I
couldnt find the numerical IDs of these groups: and it lists about 10 groups. (ident, mailnull, netdump,news, nscd, pcap, piranha, pvm, rpm, squid, xfs) I didnt see these groups in /etc/group or/etc/gshadow and I am not sure that any of the corresponding programs are loaded on the new
machine. Any help on this would be greatly appreciated. Thanks!
Reply
77 Jeremy December 12, 2012 at 4:51 pm
Correction. They are in /etc/gshadow but not in /etc/group
Reply
78 Jeremy December 12, 2012 at 5:31 pm
ahhhhhh. I answered my own question after re-reading my last post. All of the programs I listed had
GIDs lower than 500. I edited the the /etc/group file (vigr) and inserted the missing values. All is wellnow. Thanks for the awesome post.
Reply
79 metalmas January 1, 2013 at 9:17 am
Unfortunately this tutorial doesnt working when I tried migrate user with mailboxes from Fedora do
CentOS, because when I start postfix + dovecot a lot of error with permissions denied occured inmaillog and email klients could not connect :(
Reply
80 gamezat February 14, 2013 at 11:53 pm
thank you so much,
very useful i moved from server to anthor without any problems
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 19/22
thank you
Reply
81 ion March 1, 2013 at 2:35 pm
Thank you
Reply
82 ilde March 26, 2013 at 7:20 am
HiA very simple and effective approach, which I followed. Then, to copy all directories in /home
directory, I used next command as root:rsync -avz /home/ 192.168.0.15:/home
Where /home/ refers to the source machine, and 192.168.0.15 is the IP address of the destination one.All file permissions and ownerships were preserved. Also please make sure you include all slashesshown.
rsync must be installed in both the source and the destination boxes. Both machines are servers whichrun Debian Squeeze.
Thanks
Reply
Leave a Comment
Name *
E-mail *
Website
You can use these HTML tags and attributes for your code and commands:
Notify me of followup comments via e-mail
Submit
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 20/22
Tagged as: awk command, encrypted password, etc passwd, linux distribution, linux server, linux system, old server, scpcommand, tar ball, user account migration, user accounts
Previous Faq: Create a mysql database, tables and insert data
Next Faq: How to test or check reverse DNS
GET FREE TIPS
Make the most of Linux Sysadmin work!
Enter your email Sign Up
Youtube | Twitter | Google +
nixCraft
Like
32,043 people like nixCraft.
Facebook social plugin
Related Faqs
How do I know When I Need To Update My Linux SystemSoftware?
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 21/22
Understanding /etc/shadow file
Reboot Linux System Command
UNIX / Linux Command To Check Existing Groups and Users
Understanding /etc/passwd File Format
Linux deny or block user login
Linux / Unix AWK: Read a Text File
-
4/20/13 Move or migrate user accounts from old Linux server to a new Linux server
www.cyberciti.biz/faq/howto-move-migrate-user-accounts-old-to-new-server/ 22/22
How To Test Linux Operating System for IPv6 Networking Support
Linux What defines a user account?
Linux Upgrade Password Hashing Algorithm to SHA-512
2006-2013 nixCraft. All rights reserved. Cannot be reproduced without written permission. Privacy Policy | Terms of Service | Questions or Comments | Sitemap