Motorola ML910 Rear Connections
1
Rear Components Ref Component Description See Also n RJ-11 Port Connects the telephone line. P. 2-20 o RJ-45 Port Connects the LAN cable. Included a link indicator and an active indicator. P. 2-19 p GPS RF pass through Port Serves as the interface between the system and external GPS antenna, in conjunction with a Vehicle Docking station. P. 2-25 q WWAN Module RF pass through Port Serves as the interface between the system and antenna of the optional WWAN module, in conjunction with a Vehicle Docking station. P. 2-21 r Docking Port For connecting to an Office Port Replicator or Vehicle Dock (both are available as an option). s USB Port 1 t USB Port 2 Supports USB2.0 (i.e. USB High Speed Devices) and Legacy USB Full and Low Speed Devices (i.e. USB 1.1 and YSB1.0); and up to 1A load for each USB Port. P. 4-3 u Power Connector Connects the AC adapter. P. 1-4 CAUTION: For protection against transient over-voltages from the environment, the RF Pass-through Port for the GPS and WWAN should only be engaged using the docking station, supplementary steps may be necessary when doing an external installation." 1-10 Getting Started
-
Upload
oc-rugged-laptops -
Category
Documents
-
view
37 -
download
2
description
The back of the ML910 Rugged Notebook you’ll very crucial connections such as the RJ11 (56k modem), RJ45 (Ethernet), External GPS connection, WWAN external Antenna connection, Docking Port, 2x USB Port and the Power Connector. These ports are conveniently located to the back of the ML910 for vehicle mounts with port replication. (External Antenna hook ups longer range.)
Transcript of Motorola ML910 Rear Connections
Rear Components
Ref Component Description See Also
RJ-11 Port Connects the telephone line. P. 2-20
RJ-45 Port Connects the LAN cable. Included a link indicator and an active indicator. P. 2-19
GPS RF pass through Port
Serves as the interface between the system and external GPS antenna, in conjunction with a Vehicle Docking station.
P. 2-25
WWAN Module
RF pass through Port
Serves as the interface between the system and antenna of the optional WWAN module, in conjunction with a Vehicle Docking station.
P. 2-21
Docking Port For connecting to an Office Port Replicator or Vehicle Dock (both are available as an option).
USB Port 1
USB Port 2
Supports USB2.0 (i.e. USB High Speed Devices) and Legacy USB Full and Low Speed Devices (i.e. USB 1.1 and YSB1.0); and up to 1A load for each USB Port.
P. 4-3
Power Connector Connects the AC adapter. P. 1-4
CAUTION: For protection against transient over-voltages from the environment, the RF Pass-through Port for the GPS and WWAN should only be engaged using the docking station, supplementary steps may be necessary when doing an external installation."
1-10 Getting Started
