MONTREUX FLOOR MOUNT CHANNEL B2 - Euroglass · 12 Ø32 10 or 12 Ø50. BALUSTRADE & POOL: MILANO...

MONTREUX FLOOR MOUNT CHANNEL B2 - B3

GENOA FLOOR MOUNT CLAMP B4 - B5

LUGANO FACE FIX CLAMP B6 - B7

MONACO FLOOR MOUNT CLAMP B8 - B9

EUROANCHOR DISCS & SPACERS B10 - B17

MILANO EUROPOSTS B18 - B25

EUROBRACE & MINIPOSTS B26 - B27

HANDRAILS B28

BRACKETS & CLAMPS B29 - B30

VIENNA HYDRAULIC HINGE & LATCH B31 - B32

POOL GATE DOOR PIVOTS B33

BALUSTRADE & POOL:INDEX

catalogue effective 1st june 2015

B1

CALL: (09) 624-1180www.euroglass.co.nz

BALUSTRADE & POOL:MONTREUX

MontReuX Residential Floor Mount ChanneleDc

availaBle finisHes• Mill finish• Silver Pearl powdercoat • Selected powdercoat, lead time applies

tecHnical Details1.25m, 2.5m and 5m stock lengthsSupplied complete with clamping kits and cover platesVertical adjustment up to 15mmOut of plumb adjustment: +/- 50mm @ 1000mm high +/- 60mm @ 1200mm highM10 coach screw at 200mm centres fixing in timberM10 s/s epoxy bolts at 400mm centres fixing in concrete and steelClamping kits no greater than 400mm centresSupporting base channel is anotec powder-coated with 10yr warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassBased on barrier loads from AS/NZS1170.1Viridian 12mm toughened or 13.5mm toughened laminated safety glassVery high wind zone 1.76 kPa or lessMaximum heights above floor level are:

For Residential Occupancies A & C3 of Table 3.3 AS/NZS1170.1 1100mm from finish floor level1200mm with glass corners at the top connected by Euroglass balustrade clamps, or an interlinking handrail at 900mm to 1000mmEnd panels must be connected to the building by clamps or interlinking railSuitable for pool fencing protecting a fall of 1 metre or moreRefer to our website for further details

eDcenDEnd Cap

100mm

89mm

12mm25mm glass clearance

glass cut out Detail

R12.5

25mm

60mm

concrete fixing

B2


BALUSTRADE & POOL:MONTREUX

MontReuX Residential Floor Mount ChanneleDc

steel fixing

timber fixing

B3


BALUSTRADE & POOL:GENOA

genoa Commercial Floor Mount ClampeYB

availaBle finisHes• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies

tecHnical Details1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options:• Concrete fix• Steel fix

Suitable for 15mm toughened and 17.5mm laminated glassRecommended installation tools availableEnd caps availableGlass cut out required10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass

Based on design loads from AS/NZS 1170.1 and a max. uls wind pressure of2.13 kPa (extra high wind zone), minimum glass thicknesses are:

For commercial occupancies B, E and C3 of Table 3.3 AS/NZS 1170.1:Up to 1100mm high balustrade measured from floor levelViridian ‘Balustrade 100’ 15mm toughened safety glass or 17.5mm laminated toughened glassRefer to our website for further details

glass notch

steel fixing

B4


BALUSTRADE & POOL:GENOA

genoa Commercial Floor Mount ClampeYB

concrete fixing

single concrete fixing plate

B5


lugano Residential Face Fix Channelefc


tecHnical Details1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options: • Concrete fix • Steel fix • Bolt through timber fix • Lag screw

Suitable for 12mm toughened and 13.5mm laminated glassRecommended installation tools availableEnd, internal and external corner caps availableNo glass cut outs or holes required10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass

Based on barrier loads from AS/NZS 1170.1, Viridian 12mm ‘Balustrade 100’ toughened safety glass or 13.5mm toughened laminated safety glass, maximum height above the channel is:For Residential Occupancy A, B, C3 of Table 3.3 AS/NZS 1170.1 - Very high wind zone 1.76 kPa or less: 1200mm high with glass corners at top edge connected by Euroglass balustrade clamps or with an interlinking rail at 900mm to 1000mmEnd panels must be connected to the building by clamps or interlinking railExtra high wind zone 2.13 kPa or less: 1100mm high without balustrade corner clamps or interlinking railSuitable for pool fencing protecting a fall of one metre or moreRefer to our website for further details

BALUSTRADE & POOL:LUGANO

concrete fixing timber slatted deckbolt-through fixing

B6


lugano Residential Face Fix Channelefc

BALUSTRADE & POOL:LUGANO

600

timber slatted decklag screw fixing

6

timber enclosed decklag screw fixing

steel fixingexternal & internal

steel fixinginternal

B7


Monaco Commercial Face Fix Clampegl


tecHnical Details1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options:• Concrete fix• Steel fix • Bolt through timber fix

Suitable for 15mm and 19mm toughened and 17.5mm and 21.5mm laminated glassRecommended installation tools availableEnd, internal and external corner caps availableGlass cut-out required10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass

Based on design loads from Table 3.3 of AS/NZS 1170.1 and a max. uls wind pressure of 3.0 kPa,minimum glass thicknesses and max balustrade heights measured from top of clamp are:

Occupancy B, E & C3‘Viridian Balustrade 100’ 15mm toughened safety glass or 17.5mm toughened laminated safety glass up to 1200mm

Occupancy C1/C2 & D:Viridian ‘Balustrade 100’ 15mm toughened safety glass up to 1100mm with corner connectors, orViridian ‘Balustrade 100’ 19mm toughened safety glass or 21.5mm laminated toughened glass up to 1200mm

Refer to our website for further details

BALUSTRADE & POOL:MONACO

B8


concrete fixing

glass notch

Monaco Commercial Face Fix Clampegl

BALUSTRADE & POOL:MONACO

timber slatted deck

steel fixing

B9


euBfsD50/51 Euroanchor 50mm stepped discEUBFSD50 includes 25mm thick spacer / EUBFSD51 includes 10mm thick spacer

availaBle finisHes• Satin anodised• Polished stainless steel • Satin stainless steel

tecHnical DetailsManufactured in 316 grade stainless steelAnodised to over 20 µmThe substrate material can be concrete, steel or timberIncludes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm dia25mm spacer can be threaded M10 or 10.5mm through hole (specify upon order)Fixing centres as per PS1PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass

euBfsQ Euroanchor 50mm square stepped disc

availaBle finisHes• Polished stainless steel • Satin stainless steel

tecHnical DetailsManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timber Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm diaFixing centres as per PS1 PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass

euBfcs Euroanchor 50mm countersunk stepped disc


tecHnical DetailsManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timber10mm and 25mm spacers available Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 22mm dia25mm spacer threaded M10M10 x 35 countersunk hex boltFixing centres as per PS1PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass

euBfsQD Euroanchor rectangular stepped disc


tecHnical DetailsManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timberDouble 25mm spacer 10.5mm through holeIncludes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm diaFixing centres as per PS1PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass

BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS

B10


10

euRoancHoR Residential Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD

For Residential ccupancies A, B, C3 of Table 3.3 AS/NZS 1170.1Based on 12mm Viridian ‘Balustrade 100’ toughened safety glass, maximum heights of glass above top anchors for residential occupancies A and C3 of Table 3.3 AS/NZS 1170.1 are: - Very high wind zone 1.76 kPa - 1100mm - High wind zone 1.36 kPa - 1200mm with corner connectors or interlinking handrail

Maximum distance from side edge of glass to fixings is 300mm for occupancy A and 200mm for occupancy C3 10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass


concrete fixing

timber slatted deckbolt-through fixing

B11




tapped fixing steelinternal only

steel fixing

B12




timber lag screwinternal only

Weatherboard, angle spacerenclosed deck only

B13




timber fix, cavity claddingenclosed deck

timber, lag screw fixingslatted deck

B14


euRoancHoR Commercial Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD

For Commercial occupancies B, E, C3 of Table 3.3 AS/NZS 1170.1Based on 15mm Viridian ‘Balustrade 100’ toughened safety glass, maximum heights of glass above top anchors for commercial occupancies B, E, C3 of Table 3.3 AS/NZS 1170.1 are: - Extra high wind zone 2.13 kPa - 1200mm

10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass


concrete fixing

B15


euRoancHoR Commercial Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD


steel fixing

timber slatted deckbolt-through fixing

B16


sP5025t and sP5025 Spacers


tecHnical DetailsSP5025T - Threaded M10 holeSP5025 - 10.5mm dia. through hole

sPc5010 Countersunk disc or Spacer


tecHnical DetailsDrilled and countersunkTo suit M10 countersunk hex bolt

sD50M10 Stepped disc


tecHnical DetailsM10 threaded blind hole

sP505WB Weatherboard shim


tecHnical Details8 degree angle12mm thick tapered to 5mm10.5mm dia. through hole

sPg3210/12 Gib spacers

availaBle finisHes• Plastic • Aluminium

tecHnical Details10mm thick plastic or aluminum12mm thick plastic or aluminium

BALUSTRADE & POOL:SPACERS & STEPPED DISCS

B17


25

Ø50

Ø50

10

Ø50

12

Ø32

10 or 12

Ø50

BALUSTRADE & POOL:MILANO EUROPOST RESIDENTIAL

Milano Post Semi-Frameless Residential Balustrade PostseRP availaBle finisHes• Silver Pearl powdercoat• Selected powdercoat

tecHnical DetailsBased on design loads from AS/NZS 1170.1 and a max uls wind pressure of 1.76 kPa (very high wind zone)Rated for Residential occupancy A and C3Suited for Viridian ‘Balustrade 100’ 10mm toughened safety glass or 11.5mm toughened laminate glassFixed at 1650mm centresMaximum height 1100mmMaximum glass overhang 500mmPS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glassRefer to our website for further details

eRPtTop FixedConcrete or steelSupplied complete with fixing to suit substrateFour fixings per postMinimum edge distance for fixings is 50mm

500mm max.

500mm max.

B18


BALUSTRADE & POOL:MILANO EUROPOST RESIDENTIAL

Milano Post Semi-Frameless Residential Balustrade PostseRPfFace FixedConcrete, steel or bolt through timberMinimum edge distance for fixings is 60mmTwo fixings per post

eRPHConcealed Face FixedSteel or bolt through timberMinimum edge distance for fixings is 30mmTwo fixings per post

B19


BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL

Milano Post Semi-Frameless Commercial Balustrade PostsecPavailaBle finisHes• Silver Pearl powdercoat• Selected powdercoat

tecHnical Details

To suit Commercial occupancy B, E and C3Concrete or bolt through timberSuited for Virdian ‘Balustrade 100’ 10mm toughened safety glass or 11.5mm toughened laminated glassFixed at 1100mm centresMaximum height 1100mmMaximum glass overhang 500mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer to our website for further details

500mm max.

500mm max.

B20



Milano Post Semi-Frameless Commercial Balustrade PostsecPfcTo suit Commercial occupancy B, E and C3Face fixed to concrete substrate

ecPfBtTo suit Commercial occupancy B, E and C3Face fixed to timber substrate

B21



Milano Post Semi-Frameless Commercial Balustrade PostsecPtcTo suit Commercial occupancy B, E and C3Top fixed to concrete substrate

B22



Milano Post Semi-Frameless Commercial Balustrade Posts (C5)ecPRavailaBle finisHes

Silver Pearl powdercoatSelected powdercoat, lead time applies

tecHnical Details

To suit Commercial occupancy C1, C2, D and C5Concrete, steel or bolt through timberTwo fixings per postSuited for Viridian ‘Balustrade 100’ 15mm toughened safety glass or 17.2mm toughened laminated glassFixed at 1100mm centresMaximum height 1100mmMaximum glass overhang 300mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer to our website for further details

300mm max.

B23



Milano Post Semi-Frameless Commercial Balustrade Posts (C5)ecPRBtTo suit Commercial occupancy C1, C2, D and C5Face fixed to timber substrateSubstrate fixings are concealed

ecPRsTo suit Commercial occupancy C1, C2, D and C5Face fixed to steel substrateSubstrate fixings are concealed

B24



Milano Post Semi-Frameless Commercial Balustrade Posts (C5)ecPRcTo suit Commercial occupancy C1, C2, D and C5Face fixed to concrete substrateSubstrate fixings are concealed

B25


eB1 Eurobrace

availaBle finisHes• Polished stainless steel• Satin stainless steel

tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 10, 12 and 15mm glassPosts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter holes in glass45mm typical clearance from ground surfaceDistance from inside face of glass and post centre is 40mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details

eB2 Eurobrace, square


tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 10, 12 and 15mm glassPosts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter holes in glass45mm typical clearance from ground surfaceDistance from inside face of glass and post centre is 32mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details

BALUSTRADE & POOL:EUROBRACE POSTS

B26


40 50

110

265

110

50

44

260

Glass Cut Out Detail

110

45

50

Ø26


110

45

50

Ø26

fMP250 Miniposts


tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 12 and 15mm glassMini posts are set 85mm into concrete (Ø60mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter hole in glass45mm typical clearance from ground surfaceOptional Dress Ring or Cover Plate availablePS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details

fMP350 Miniposts


tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 12 and 15mm glass26mm diameter hole in glass45mm typical clearance from ground surfacePosts can be fastened to concrete or wooden surfaces using 2 x M10 bolts/screwsPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details

BALUSTRADE & POOL:MINI POSTS

B27


165

17

250

Ø50

Ø26

65

45


77

Ø26

45


FMP250RING 80mm outside dia.

51mm inside dia.

FMP250COVER 125mm outside dia.

51mm inside dia.(matches FMP350 cover)

50

187

Ø90 PCD4 holes

14

Ø125

BH1 Slimline handrail & end cap

availaBle finisHes• Mill finish• Silver Pearl powdercoat• Selected powdercoat (lead time applies)

tecHnical DetailsMeets AS1288-2006 for handrailing for glass balustrades that are over 1m in height and only fixed to the baseComplies with NZS4203:1992 for handrailsSuitable for 10mm and 12mm glass (specify when ordering)Can be used for both interior and exterior applicationsDesigned for easy fitting, clips directly over the glass: no welding required and can be installed after glass is fitted

euHB50 Handrail bracket


tecHnical Details26mmØ hole in glass for EUHB50Supplied 150mm high for on-site trimming

euHB50sQ Handrail bracket, square


tecHnical Details26mmØ hole in glassSupplied 150mm high for on-site trimming

euHBtf50 Handrail bracket timber fix


tecHnical DetailsDesigned for timber fixingSupplied 150mm high for on-site trimming

euHBtf50sQ Handrail bracket timber fix, square


tecHnical DetailsDesigned for timber fixingSupplied 150mm high for on-site trimming

BALUSTRADE & POOL:HANDRAILS

B28


BH2End Cap

22mm

30mm

Bci/BcWM/Bc90/Bc135 Balustrade clamps

availaBle finisHes• Polished stainless• Satin stainless

tecHnical DetailsSuitable for 12mm glass316 grade stainless steelSupplied with rubber gasket inserts

BB70/BB70sQ Balustrade brackets, wall mount


tecHnical DetailsSuitable for 10 and 12mm glass316 grade stainless steelRound and square options

BBD70/BBD70sQ Balustrade brackets, glass/glass


tecHnical DetailsSuitable for 10 and 12mm glass316 grade stainless steelRound and square options

BALUSTRADE & POOL:BRACKETS & CLAMPS

B29


BB70 BB70sQ

BBD70 BBD70sQ

33 20

Ø18 holein glass

45

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

� ��

��

��

��

��

��

��

�

�

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

�

��

� �

��

�¡

��

��

��

��

��

�

��

� �

��

�

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

� ��

� ��

� ��

�

�

�

��

�

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�¡

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�¡��

��

��

��

��

¡�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

� ��

��

��

��

��

��

��

�

�

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

�

��

� �

��

�¡

��

��

��

��

��

�

��

� �

��

�

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

� ��

��

��

��

��

��

��

�

�

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

�

��

� �

��

�¡

��

��

��

��

��

�

��

� �

��

�

��

�

��

��

��

��

BciGlass-to-Glass

typical height

Bc9090˚ Corner

BcWMWall Mount

18

BALUSTRADE & POOL:CLAMPS

BcRD6/10, BcfD6/10, BcRs8/10, Bcfs8/10 Glass clamps, post or wall mount


tecHnical DetailsOptions for 6, 8, 10 and 12mm glass316 grade stainless steelRound and square profilesFlat back for fixing to square section and wall mounting, or round back to suit 50mm tubular post

45

47

27

Gla

ss8-

10m

m

17

Code No. Item Number Finish

BCFS8PS 8752405 Polished

BCFS8SS 8752406 Satin

COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.

316 Stainless Steel

SatinPolished 01/02/2011

01/02/2011 Balustrade Clamp Flat back

1:1 1 of 2

65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180

Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:

Finish:PROJECTIONTHIRD ANGLE

DRAWN IN REV MODIFICATIONS DATE

--

--First Drawn

--A

Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5

Remove all burrs & sharp edges.

Square shape 8-10mm

8752405

45

49

27

17

Gla

ss8-

10m

m


BCRS8PS 8753405 Polished

BCRS8SS 8753406 Satin


316 Stainless Steel


01/02/2011 Balustrade Clamp Round back

1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



Square shape 8-10mm

8753405

53

3824

14

Gla

ss6-

8mm


BCRD6PS 8751405 Polished

BCRD6SS 8751406 Satin


316 Stainless Steel



1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



D shape 6-8mm

8751405

49

38

24

14

Gla

ss6-

8mm


BCFD6PS 8750405 Polished

BCFD6SS 8750406 Satin


316 Stainless Steel



1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



D shape 6-8mm

8750405

38

53 49

45

49

45

47

54

38

65

54

60

55

60

65

5427

25

Gla

ss10

-12m

m


BCRD10PS 8755405 Polished

BCRD10SS 8755406 Satin


316 Stainless Steel



1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



D shape 10-12mm

8755405

60

5426

22

Gla

ss10

-12m

m

19


BCFD10PS 8754405 Polished

BCFD10PSS 8754406 Satin


316 Stainless Steel



1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



D shape 10-12mm

8754405

55

60

19

Gla

ss10

-12m

m


BCRS10PS 8757405 Polished

BCRS10SS 8757406 Satin


316 Stainless Steel


02/02/2011 Balustrade clamp Round back

1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



Square shape 10-12mm

8757405

55

56

31

17

Gla

ss10

-12m

m


BCFS10PS 8756405 Polished

BCFS10SS 8756406 Satin


316 Stainless Steel



1:1 1 of 2


Part Name:

Drawing No. Sheet:

Drawn:

Date:

Scale (A4):

G.BourneMaterial:



--

--First Drawn

--A



Square shape 10-12mm

8756405

BcfD10 Flat back 10-12mm glassBcRD10 Round back 10-12mm glass

Bcfs8 Flat back 8-10mm glassBcRs8 Round back 8-10mm glass

Bcfs10 Flat back 10-12mm glassBcRs10 Round back 10-12mm glass

BcfD6 Flat back 6-8mm glassBcRD6 Round back 6-8mm glass

56

55

B30


BALUSTRADE & POOL:VIENNA HYDRAULIC HINGES

eH1nHo Glass to wall hydraulic hinge

availaBle finisHes• Polished stainless steel, marine grade 316

tecHnical Details

Made from aluminium and stainless steel Hinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight: 70kgMaximum recommended door width: 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed

eH1lnHo Glass to wall hydraulic hinge, offset


tecHnical Details

Made from aluminium and stainless steelHinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight: 70kgMaximum recommended door width: 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed

eH2nHo Glass to glass hydraulic hinge


tecHnical Details

Made from aluminium and stainless steelHinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight; 70kgMaximum recommended door width; 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed

B31


78

84

R 13

R 5

50

glass cut-out detail

563

120

909

24

11.5

HYDRAULIC HINGEWITH "L" WALL MOUNTING PLATE

This drawing remainsthe property of

Euroglass Systems Ltd

COPYRIGHT 2010

6

563

120

90

9

24

11.5

HYDRAULIC HINGEWITH "L" WALL MOUNTING PLATE

This drawing remainsthe property of

Euroglass Systems Ltd

COPYRIGHT 2010

11.55 63

45

120

90

BALUSTRADE & POOL:VIENNA POOL GATE LATCHES(Profile & finish to complement hydraulic hinge)

eHPl1 Gate latch and strike


tecHnical DetailsDesigned for a frameless glass pool gate that closes to a post or wallSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request

eHPl1RP Round Post Gate latch and strike


tecHnical DetailsDesigned for a frameless glass pool gate 50mm dia. post mountSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request

Made to order only

eHPl2 Gate latch and keeper


tecHnical DetailsDesigned for a frameless glass pool gate and side panelSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request

eHPl290 Gate latch and keeper


tecHnical DetailsDesigned for a frameless glass pool gate that closes to a side panel at 90˚Single action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request

B32


Ø12

Gate Panel

Ø12ø16 ø16

Glass Preparation

Glass Preparation

3333

66

5

105mm

Glass Preparation

50mm

Gate Panel

ø1666

33

150 min

Return/Post

8

Gate Panel

ø1666

33

150 min

Return/Post

5

100mm

100mm

38mm

50mm

38mm

100mm

150 min

Side ViewTop View

ø16

66

Glass Preparation

50mm

100mm

BALUSTRADE & POOL:PIVOTS

fPf790 Europool top pivot arm 90˚


tecHnical DetailsDesigned for mounting a glass gate to a glass balustradeUsed in conjunction with HPT20/HPT10 top patch fittings that allows them to work as a top pivot setFrameless glass mountingManufactured in 316 stainless steel

HPt20Pg Top fitting to suit pool gate pivots


tecHnical DetailsTop patch fitting suitable for Euroglass pool gate fittings: FPF5/FPF6/FPF7 and FPF790/FPF8Adjustable pivot insertFeatures concealing cover plates

B33


106mm

30mm

FPF790Lleft hand

91mm

167mm

30mm

FPF790Rright hand

167mm

91mm

106mm

161

148

6836 37

2055 R 80

31mm

166mm52mm

ASSSEMBLY (rh)

DOORRETURN PANEL

MONTREUX FLOOR MOUNT CHANNEL B2 - Euroglass · 12 Ø32 10 or 12 Ø50. BALUSTRADE & POOL: MILANO...

Documents

Transcript of MONTREUX FLOOR MOUNT CHANNEL B2 - Euroglass · 12 Ø32 10 or 12 Ø50. BALUSTRADE & POOL: MILANO...