Moen 3-Function Diverter Valve a custom multi-outlet shower. Moen ® 3-Function Diverter Valve...
Transcript of Moen 3-Function Diverter Valve a custom multi-outlet shower. Moen ® 3-Function Diverter Valve...
Create a custom multi-outlet shower.
Moen® 3-Function Diverter Valve
Design multiple-outlet showers with unlimited configurations using the new 3-Function Diverter Valve from Moen.
The neutral trim styling of the 3-Function Diverter Valve works with any Moen bath suite of your choice. Pair it with a Moentrol® valve showerhead and a hand shower or body sprays for an indulgent experience that offers both volume and temperature control. Or use it with a Posi-Temp® valve, ENVI™ eco-performance showerhead and hand shower for a refreshing experience that has the added benefit of reduced water consumption.
For more information, visit moen.com.
Features of the Moen 3-Function Diverter Valve:
• 2 discrete and 1 shared setting
• Maximum customization options – use with any Moen mixing valve
• Minimalist design complements all décor and coordinates with all Moen bath suites
• Available in Chrome, Brushed Nickel and Oil Rubbed Bronze
• 1/2" CC connections
• Valve and trim sold separately
SKU Description Price
3372 3-Function Diverter Valve $130.00
T4171 3-Function Diverter Valve Trim – $80.00 Chrome
T4171BN 3-Function Diverter Valve Trim – $109.60 Brushed Nickel
T4171ORB 3-Function Diverter Valve Trim – $120.80 Oil Rubbed Bronze
A new standard of ease and flexibility for your custom shower designs.
All vertical dimensions (italicized) measured from floor. Dimensions listed are suggested.*Minimum of 40 psi recommended for both the Moentrol and Posi-Temp configurations.
All vertical spa components are based on the M•PACT® Common Valve System.
One-Wall Moentrol® with 3-function diverter valveBODY SPRAYS:Thread the body sprays onto a 1/2" NPT supply pipe. Pipe should protrude 1/2" – 5/8" from the wall.
A pressure-balancing loop must always be used with body sprays to allow for equal supply of water to each spray.
Always cap the shower port when using the Moentrol® valve in a vertical spa configuration.
This configuration applies to Moen®
vertical spas.
78"
44"
HOT WATER INLET COLD WATER INLET
Shared Function
54"
39"
12" Min.16" Recommended
20" Max.
®
To be installed upside down, and also flip the retaining clip.
One-Wall Posi-Temp® with 3-function diverter valve
78"
44"
HOT WATER INLET COLD WATER INLET
This configuration applies to Moen® and ShowHouse®
vertical spas.
12" Min.16" Recommended
20" Max.
Shared Function
Always cap tub port if not using a tub spout.
3 Functions2 discrete1 shared
© 2010 Moen Incorporated. All rights reserved.
Note: This configuration is not intended for using a tub spout. Refer to MF3151 if installing a tub spout.
When using a tub spout with a mixing valve and diverter, plumb the flow valve bottom outlet to the twin ell front vertical inlet. Plug the top outlet of the flow valve. Plumb the twin ell rear vertical outlet to the diverter. Plumb the twin ell front horizontal outlet to the tub spout. Cuando se usa un pico de bañera con válvula mezcladora y derivador, conecte la salida inferior de la válvula de flujo al codo doble de la entrada vertical del frente. Conecte la salida superior de la válvula de flujo. Conecte el codo doble de la salida vertical trasera al derivador. Conecte el codo doble de la salida horizontal del frente al pico de la bañera.
A pressure-balancing loop must always be used with body sprays to allow for equal supply of water to each spray.Siempre se deberá usar un distribuidor equilibrado con los rocíos para el cuerpo que permita el flujo igual de agua para cada rocío.
This configuration applies to Moen® vertical spas.
Esta configuración aplica a bañeras de hidromasaje vertical Moen®.
One-Wall Moentrol® with tub spoutMoentrol® de una pared con pico de bañera
All vertical dimensions (italicized) measured from floor. Dimensions listed are suggested.Todas las dimensiones verticales (en cursiva) están medidas desde el piso. Las dimensiones mencionadas son sugeridas.
All vertical spa components are based on the M•PACT® Common Valve System.Todos los componentes de la bañera de hidromasaje vertical están basados en el sistema común de válvulas M•PACT®.
78"
54"
52"
39"
44"
16"
HOT WATER INLETEntrada de agua caliente
COLD WATER INLETEntrada de agua fría
From Flow Valve
To Shower Head
eZ
Shared FunctionFunción compartida
3 Functions 3 funciones
2 discrete2 diferentes
1 shared1 compartida
From Flow Valve
Desde la válvula de flujo
To DiverterAl derivador
All vertical dimensions (italicized) measured from floor. Dimensions listed are suggested.*Minimum of 40 psi recommended for both the Moentrol and Posi-Temp configurations.Todas las dimensiones verticales (en cursiva) están medidas desde el piso. Las dimensiones mencionadas son sugeridas.*40 psi mínimos recomendados tanto para la configuración Moentrol como para Posi-Temp.
© 2010 Moen Incorporated. All rights reserved.MF3151
All vertical spa components are based on the M•PACT® Common Valve System.Todos los componentes de la bañera de hidromasaje vertical están basados en el sistema común de válvulas M•PACT®.
When using a tub spout with a mixing valve and diverter, plumb the flow valve bottom outlet to the twin ell front vertical inlet. Plug the top outlet of the flow valve. Plumb the twin ell rear vertical outlet to the diverter. Plumb the twin ell front horizontal outlet to the tub spout. Cuando se usa un pico de bañera con válvula mezcladora y derivador, conecte la salida inferior de la válvula de flujo al codo doble de la entrada vertical del frente. Conecte la salida superior de la válvula de flujo. Conecte el codo doble de la salida vertical trasera al derivador. Conecte el codo doble de la salida horizontal del frente al pico de la bañera.
This configuration applies to Moen® vertical spas.
Esta configuración aplica a bañeras de hidromasaje vertical Moen®.
One-Wall Posi-Temp® with 3-function diverter valvePosi-Temp® de una pared con válvula derivadora de 3 funciones
78"
44"
52"
16"
Shared FunctionFunción
compartida
eZHOT WATER INLET
Entrada de agua calienteCOLD WATER INLET
Entrada de agua fría
3 Functions 3 funciones
2 discrete2 diferentes
1 shared1 compartida
From Flow Valve
Desde la válvula de flujo
To DiverterAl derivador