Module 2 - Software Installation and Recommended Settings
-
Upload
elio-jose-aguilar-romero -
Category
Documents
-
view
223 -
download
0
Transcript of Module 2 - Software Installation and Recommended Settings
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
1/16
1
TEMSINVESTIGATION
Module 2: Software Installation and Recommended Settings
[THE INDUSTRY-LEADING AIR INTERFACE TEST TOOL]
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
2/16
2
Objectives
After completing this module you will be able to:
Understand the hardware and software requirements for TEMS Investigation.
Install TEMS Investigation, device drivers and licenses.
Understand the license update process.
Review your license contents. Configure the PC for proper operation of TEMS Investigation.
Run TEMS Investigation.
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
3/16
3
PC Hardware Requirements
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation is designed to run on a standard PC and interfaces with the
connected devices mainly through USB or serial ports.
Processor and RAM requirements are strongly dependent on what external devices
are connected and what tasks they will perform.
Recommended minimum configuration is: Pentium T7200 or AMD TL-58 class CPU,
preferably with dedicated graphics card from ATI or nVidia; 1 GB RAM.
Note that it is not advisableto collect data with more than one device, or to collect
data in an LTE or HSPA network, using the configuration above.
When using TI for highspeed data testing or multiple devices we strongly
recommend using a computer with a dedicated grafic card.
All details regarding hardware requirements can be found in the Getting Started
Manual section 5.1.
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
4/16
4
PC Software Requirements
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
Operating System
Windows 7 with Service Pack 1 (x86, x64)
Windows Vista with Service Pack 2 (x86)
Windows XP with Service Pack 3 (x86)
All the latest Windows updates should always be installed
Third-party Software
.NET Framework version 4.0
Internet Explorer 6.0 or higher
Microsoft Core XML Services (MSXML) 6.0 (not included in Windows XP)
Microsoft DirectX 9.0c required for video streaming measurements
All details regarding software requirements can be found in the Getting
Started Manual section 5.1
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
5/16
5
Installing TEMS Investigation
Administrator rights are required to install TEMS Investigation.
User Authentication Control (UAC) must be turned off
Install from CD following the on-screen instructions.
If installation does not start automatically, run the file
SetupTEMSInvestigation.exe
Default installation folder: C:\Program Files\Ascom\TEMS Products\TEMS Investigation .
Utilities installed:
HASP SRM Remote Update
Check for TEMS Investigation Update
Manual UE Configuration Service Settings
TEMS Investigation Computer Diagnostics
TEMS Pocket Positioning Tool
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
6/16
6
Updating TEMS Investigation
TEMS Investigation updates are available automatically.
Check at start up
Utility to check for updates installed
Located under the utilities folder Default installation folder:
TEMS Investigation 14.0 to 14.x
Only PC Software is updated
New features added might need additional license(s) purchased separately
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
7/16
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
8/16
8
Installing HASP licenses
Local license HASP HL, no further
action.
Local license HASP SL, apply license to
PC.
Network license HASP SL, install HASPdriver in license server machine and
apply license to license server.
All details regarding installation of HASP
licenses can be found in the Getting
Started Manual Chapter 6.
HASP HL
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
9/16
9
License update process
Using HASP SRM Remote Update
tool a c2v file is generated from
hardware key or PC.
File sent to TEMS Support.
License file is upgraded and v2cfile is sent to the customer.
Customer applies license update to
hardware key or PC.
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
c2vUpgrade
v2c
customer
Extract info
Update
c2v
/ HASP SL
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
10/16
10
HASP Admin Control Center
Review what is covered by your
local or network license.
Accessed using Internet Browser
http://localhost:1947/_int_/features.html
Each Feature Id is related to alicense option. Meanings of these
Ids can be found in the Getting
Started Manual Chapter 4.5.
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
http://localhost:1947/_int_/features.htmlhttp://localhost:1947/_int_/features.html -
8/12/2019 Module 2 - Software Installation and Recommended Settings
11/16
11
TEMS Investigation Computer Diagnostics
Evaluates current status of the PC.
Determines how well it is prepared for
running TEMS Investigation.
Performs the following:
Checks several PC settings that havesignificant impact on TEMS Investigation
performance, particularly regarding data
collection.
Checks hardware capabilities (processor
and RAM), and matches them against the
requirements of TEMS Investigation.
Launched from Start>All
Programs>Ascom>TEMS Products>TEMS
Investigation >Utilities
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
12/16
12
Launching TEMS Investigation
HASP license is required to launch
TEMS Investigation.
HASP HL: Hardware key must be
connected to a USB port of the PC.
HASP SL: Software key must be applied
to the PC or obtained from a LicenseServer.
Launched from:
Start>All Programs>Ascom>TEMS
Products>TEMS Investigation
Select Workspace to open and click OK.
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
13/16
13
Summary
TEMS Investigation runs on a standard PC and interfaces with connected devices
through USB or serial ports.
Processor and RAM requirements are strongly dependent on the devices to be
connected and tasks they perform.
Runs on Windows 7 SP1 (x86, x64), Vista SP2 (x86), XP SP3 (x86).
Third-party software required, .NET framework 4.0, Internet Explorer 6.0 or higher,MSXML 6.0, DirectX 9.0c.
Administrator rights required to install TEMS Investigation.
Device drivers are needed to connect devices with TEMS Investigation.
A valid license is required to launch TEMS Investigation, connect devices and use
certain features.
License contents can be reviewed using the HASP Admin Control Center.
The Computer Diagnostics evaluates current status of a PC and determines how well
it is prepared for running TEMS Investigation.
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
14/16
14
Questions
TEMS Investigation is designed to run on a standard PC. True of False?
What type of ports does TEMS Investigation uses to interface with the connected
devices?
When installing TEMS Investigation the user can have regular user privileges. True
or False?
A valid license is required to? How can I review the contents of my license?
The TEMS Investigation Computer Diagnostics is used to determine how well a PC
is prepared for running TEMS Investigation. True or False?
[ SOFTWARE INSTALLATION AND RECOMMENDED SETTINGS ]
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
15/16
15
LEGAL DISCLAIMER
This document contains specific forward-looking statements, e.g. statements including terms likebelieve,expector similar expressions. Such forward-looking statements are subject to known and
unknown risks, uncertainties and other factors which may result in a substantial divergence between
the actual results, financial situation, development or performance of Ascom and those explicitly
presumed in these statements.
Against the background of these uncertainties readers should not rely on forward-looking
statements. Ascom assumes no responsibility to update forward-looking statements or adapt them to
future events or developments.
TEMS Investigation Ascom Network Testing
-
8/12/2019 Module 2 - Software Installation and Recommended Settings
16/16
16
THANK YOU!
TEMS Investigation Ascom Network Testing