Module 1: Part 2 Diode Circuits. Learning Objectives After studying this module, the reader should...
-
date post
21-Dec-2015 -
Category
Documents
-
view
216 -
download
1
Transcript of Module 1: Part 2 Diode Circuits. Learning Objectives After studying this module, the reader should...
Learning Objectives
After studying this module, the reader should have the ability to:
In general, apply the diode piecewise linear model in the analysis of diode circuits.
Analyze diode rectifier circuits, including the calculation of ripple voltage.
Analyze Zener diode circuits, including the effect of a Zener resistance.
Determine the output signal for a given input signal of diode clipper and clamper circuits.
Analyze circuits with multiple diodes by making initial assumptions and then verifying these initial assumptions
Half-wave rectifier circuit: (a) Sinusoidal input voltage, (b) output voltage, and (c) diode voltage
Full-wave rectifier: (a) circuit with center-tapped transformer, (b) voltage transfer characteristics, and (c) input and output waveforms
A full-wave bridge rectifier: (a) circuit showing the current direction for a positive input cycle, (b) current direction for a negative input cycle, and (c) input and output voltage waveforms
Action of a diode clamper circuit: (a) a typical diode clamper circuit, (b) the sinusoidal input signal, (c) the capacitor voltage, and (d) the output voltage