Modeling and Simulation file20 - 1 80063 a3205747 nsn: 5895-01-382-3221 - 19 6 - 80205 ms35649-2314...
-
Upload
dinhnguyet -
Category
Documents
-
view
223 -
download
2
Transcript of Modeling and Simulation file20 - 1 80063 a3205747 nsn: 5895-01-382-3221 - 19 6 - 80205 ms35649-2314...
F4 Modeling and Simulation Team
Modeling and Simulation
At Fathom4 our passion is protecting the warfighter. By being at the forefront of tactical vehicle C4ISR integration, our work has a great ability to do just that. CAD modeling and simulation provides an invaluable tool that allows us to move more of the engineering even earlier in the design process. By considering the lifecycle of the product from the initial design stages, Fathom 4 is able to develop an integration that is not only cheaper to manufacture, assemble, service and better for the environment, but also more robust and effective for the end user.
The constant challenge with integrating complex C4ISR into vehicle platforms is the uniqueness that each custom integration creates. This complexity is compounded if the timeline for integration is compressed. By moving more of the engineering to the forefront of the design process, the design can be substantially optimized before the first parts are built. This reduces rework, testing loops, scrap, field failures, and other costly hiccups that come from products designed in a typical prototype process. Throughout the design phase, the engineering team maximizes efficiency by seamlessly integrating design for manufacturability (DFM), assembly (DFA), service (DFS), and thus design for X (DFX). DFX methodologies help Fathom 4 create designs that consider every phase of the product lifecycle before the first part is ever manufactured.
www.fathom4.com
Benefits of Modeling
Fathom 4 creates a 3D vehicle model that provides a simulated integration platform. That model is used to virtually integrate metalwork, cables, and C4ISR equipment. This provides valuable feedback using interference detection analysis and space claim studies.
Other simple feedback is also provided about hardware length and cable length that reduces prototype material purchases. Finite element analysis (FEA) is used to mitigate any structural weakness in the designs using the MIL-STD composite wheeled vehicle vibration profile. This FEA feedback can also be used for specific design concerns such as steps or loading platforms.Focused on the warfighter, Fathom4 ensures that the latest modeling and simulation technology keeps the best C4ISR product in front of our soldiers.
Virtual mock upsDoesn’t require physical components
Save money on production partsImproves production efficiency
Ability to test multiple scenarios and designsSimple design modification
FT
Finite Element Analysis
Technical Data Packages
Finite Element Analysis Design and Fabrication Cable Design and Fabrication Production Level Data Packages (Formerly Level 3) OEM Platform and Component Modeling Component Installation Drawings Cable Routing Simulation Modification Drawings
Experience
We Believe in People Our Troops. Our Clients. Our Team. Fathom 4 has a simple mission: Engineering Freedom - for our country, our clients, and our employees. We delight our DoD
clients by providing the best value engineering services. Fathom 4 employees are critical members of the DoD programs we support, by being highly professional, competent, industrious, and ethical. We are an employee-centric company, founded on the belief that if we take care of our employees to the best of our ability, then they will do the same for our clients.672 Marina Drive, Suite 202, Charleston, SC 29492 - 843-603-1149 - Fathom4.com
The Fathom 4 FEA Team is able to perform static, sawtooth pulse shock, and random vibration simulations based on parameters set forth by the client’s specified standard (for example: MIL-STD 810G or 901D). Our FEA team consists of multiple degreed mechanical engineers and full-time engineering technicians dedicated to providing superior FEA services. Each of our engineers is experienced in the fields of part creation, finite element analysis and product performance. Every team member evaluates and provides input into each new FEA project in order to guarantee precise, thorough and detailed solutions.
Fathom 4’s team will create Production Level Technical Data Packages for the entire C4ISR integration. These drawing packages give full manufacturing and installation details required to reproduce the integration in a reliable and repeatable production process. Also, the engineering documentation can easily be converted into an LSA36 and engineering documentation for provisioning (EDFP) to give our clients what they require for the sustainment of the system from cradle to grave.
Fathom 4’s team has years of combined experience in a rapid prototype and production environment creating the interface points between two OEM components or completely new designs. Once the designs are complete, production level fabrication drawings are created that meet MIL-STD and ASTM requirements for consistency and thoroughness.
Production Level Fabrication
ITAR: THIS DOCUMENT CONTAINS TECHNICAL DATA THAT IS SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (ITAR) CONTROLS AND MAY NOT BE EXPORTED OR OTHERWISE DISCLOSED TO ANY FOREIGN
EXPORT LAWS IS SUBJECT TO SEVERE CRIMINAL PENALTIES.
DESTRUCTION NOTICE:
CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
DISTRIBUTION STATEMENT C. DISTRIBUTION AUTHORIZED TO THE US GOVERNMENT AGENCIES AND THEIR
REFERENCE VIEW ONLY
REVISIONSZONE REV DESCRIPTION DATE APPROVED
- X1 INITIAL DRAFT RELEASE 2014-03-28 -
29 - 1 80063 A3206080 NSN: 5965-01-382-3222 -
28 - 2 80063 A3206624 NSN: 5895-01-469-6120 -
27 - 1 80063 A3205746 NSN: 5830-01-382-3218 -
26 10 - 80205 MS15795-812 NASM15795 -
25 10 - 80205 MS15795-810 NASM15795 -
24 - 5 K1057 RA5000/1/6400 HEADSET-MICROPHONE NSN: 5965-01-551-7393 -
23 4 - 80205 MS35338-141 NASM35338 -
22 10 - 80205 MS35338-140 NASM35338 -
21 7 - 80205 MS35338-139 NASM35338 -
20 - 1 80063 A3205747 NSN: 5895-01-382-3221 -
19 6 - 80205 MS35649-2314 NASM35649 -
18 3 - 80205 MS35649-2254 NASM35649 -
17 4 - 80205 MS35307-358 NASM35307 -
16 4 - 80205 MS35307-358 ASME B18.2.1 -
15 1 - 80205 MS35307-306 ASME B18.2.1 -
14 6 - 80205 MS35307-306 NASM35307 -
13 4 - 80205 MS15795-813 NASM15795 -
12 - 3 80063 A3206444 13479 NSN: 5995-01-429-5177 -
11 - 2 80063 A3206020 NSN: 5995-01-386-9109 -
10 - 2 80063 A3206019-4 NSN: 5995-01-455-4213 -
9 - 1 80063 A3206018-21 HIGHWAY NSN: 5995-01-392-7352 -
8 - 2 80063 A3206018-12 HIGHWAY NSN: 5995-01-392-6204 -
7 - 1 80063 A3206018-4 HIGHWAY NSN: 5995-01-392-6202 -
6 - 1 80063 A3206017-4 NSN: 5995-01-455-4211 -
5 - 1 80063 A3206193-30 NSN: 5995-01-393-0216 -
4 1 - 19207 13015628 - -
3 2 - 19207 13015627 - -
2 1 - 19207 13015626 - -
1 1 - 19207 13015625 - -
FIND NO.
-1 -2 CAGECODE
PART NO. ORIDENTIFYING NO. NOMENCLATURE OR DESCRIPTION REMARKS /
SPECIFICATION NOTES
PARTS LIST
VEHICLE INTERCOM SYSTEMS (AN/VIC-3)
17
A
8
B
6
7
C
D
6 5
23
A
4
C
D
5 4
3 1
4-NONE-1:32
X113015600
UNLESS OTHERWISE SPECIFIEDDIM ARE IN INCHES
TOL ON ANGLE .5 2 PL .02 3PL .005
INTERPRET DIM AND TOL PERASME Y14.5-2009
ENGR
CHK
J.R. PESAVENTO
APVD
WEIGHT 1
REVDWG NO.SIZE
DCAGE CODE
19207OFSHEET SCALE
F.K. PERRY
E.V. RUCKEL
8
DRW
U.S. ARMY TANK AUTOMOTIVEAND ARMAMENTS COMMAND
UNCLASSIFIED
UNCLASSIFIED
THIRD ANGLE PROJECTION
SYSTEM CENTER ATLANTICDESIGN CAGE CODE 29355
FUNDING DOC: MIPR2MDAV1M127
2014-03-28
2014-03-28
DESIGN ACTIVITY APPROVAL
DESIGN:
APPROVED:PARTDASH NO.
NA
APPLICATION
NEXT ASSY USED ON
H.J. WOOD
TITLE
1301
5600
1X
1R
EVSH
DR
W N
O
DWG NO13015600
REVSH1 X1
2014-03-28
-
M1226
13015505M1227
M1227R
M1227M
ALL SHEETS ARE SAME REVISION.
THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM.
CHANGES SHALL ONLY BE INCORPORATED AS DIRECTED BY THE DESIGN ACTIVITY.
CAD VERSION: SOLIDWORKS 2013
NOTES: UNLESS OTHERWISE SPECIFIED
INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.100-2004.1.
COMMERCIALLY AVAILABLE FASTENERS MAY BE SUBSTITUTED FOR MS2.FASTENERS PROVIDED THE PHYSICAL CHARACTERISTICS AND
3.THIS DRAWING DEFINES THE CONFIGURATIONS FOR THE SAME SYSTEMASSEMBLY. THE PICTORIAL VIEWS DEFINE THE PARTS WITHIN THE ASSEMBLY USED AND THE PART NO. CONFIGURATION.
PART NO.
SEE NOTE 3
ITAR CONTROLLED DOCUMENTDISTRIBUTION IS LIMITED. SEE SHEET 1 FOR DISTRUBTION
REV
SHD
RW
NO
1301
5600
3X
1
A
A
C
C
B
SECTION A-A SCALE 1 : 16
DETAIL BSCALE 1:4
7
9
10 REF
10 REF
6
2
26 4X
22 4X
19 4X
2 4X
10
10
5
25 2X
15
21
18
20
9REF
DE
SECTION C-C SCALE 1 : 16
DETAIL DSCALE 1:4
26 2X
22 2X
16 2X
7
3
8
28REF
17 2X
23 2X
13 2X
DETAIL ESCALE 1:4
8
9
27 REF
3
26 2X
22 2X
16 2X
17 2X
23 2X
13 2X
13015600
17
A
8
B
6
7
C
D
6 5
23
A
4
C
D
5 4
3 1
162556.781:32X1
WEIGHT 3
REVDWG NO.SIZE
DCAGE CODE
19207SHEET SCALE
8
UNCLASSIFIED
UNCLASSIFIED
DWG NO13015600
REVSH3 X1
13015600