Model PS51080-SNMP NFPA Public Safety Signal Booster
2
WESTELL.COM Page 1 of 2 Model PS51080-SNMP NFPA Public Safety Signal Booster General Informaon The PS51080-SNMP is an in-building repeater that will meet both the exisng public safety communicaons regulaons and future mandates for emergency and disaster preparedness communicaons. Model PS51080-SNMP is NFPA-code compliant with NEMA Type 4 enclosure, independent control of the 700 and 800 MHz bands. Frequency Range • Uplink 788-805/806-809 or 806-816 MHz • Downlink 758-775/851-854 or 851-861 MHz Product Features • NFPA 72/1221 compliant Class B Amplifier • Compact red NEMA Type 4 enclosure • VSWR Antenna Detecon • UL Listed • FirstNet Ready • Energy efficient (less load for baery backup) • 700 and 800 MHz bands independently controlled • Passband opons • 17 MHz: 788-805 / 758-775 MHz • 3 MHz: 806-809 / 851-854 MHz • 10 MHz: 806-816 / 851-861 MHz • Independent power and gain control per band • Sharp SAW filtering reduces interference from compeng signals • Easy to install and maintain • Dry Contacts for Fire panel connecon • 80 dB gain • 27 dBm (½ Wa) • Supports SNMP • Supports digital and analog modulaon including P25 phase 1 & 2 Oscillaon Detecon and Automac Gain Control (AGC) • Built-in oscillaon control and self-healing • Shutdown in the event of non-correctable severe condions Alarms • System (PLL) • Isolaon • PA Shutdown (UL/DL) • Power Failure • Antenna DL VSWR (Can be disabled) • Antenna UL VSWR (Can be disabled) • Manual Amp off • All alarms trigger Summary Dry contact Supported LED Status • Power • Isolaon • Oscillaon (OSC) • Alarm Ordering Informaon CS14-710-810 PS51080 .5W BDA (Direct Replacement for CS14-700-800) PS51080-SNMP NFPA Public Safety Signal Booster
Transcript of Model PS51080-SNMP NFPA Public Safety Signal Booster
WESTELL .COM
Page 1 of 2
Model PS51080-SNMP NFPA Public Safety Signal Booster
General InformationThe PS51080-SNMP is an in-building repeater that will meet both the existing public safety communications regulations and future mandates for emergency and disaster preparedness communications.
Model PS51080-SNMP is NFPA-code compliant with NEMA Type 4 enclosure, independent control of the 700 and 800 MHz bands.
Frequency Range• Uplink 788-805/806-809 or 806-816 MHz
• Downlink 758-775/851-854 or 851-861 MHz
Product Features• NFPA 72/1221 compliant Class B Amplifier
• Compact red NEMA Type 4 enclosure
• VSWR Antenna Detection
• UL Listed
• FirstNet Ready
• Energy efficient (less load for battery backup)
• 700 and 800 MHz bands independently controlled
• Passband options
• 17 MHz: 788-805 / 758-775 MHz
• 3 MHz: 806-809 / 851-854 MHz
• 10 MHz: 806-816 / 851-861 MHz
• Independent power and gain control per band
• Sharp SAW filtering reduces interference from competing signals
• Easy to install and maintain
• Dry Contacts for Fire panel connection
• 80 dB gain
• 27 dBm (½ Watt)
• Supports SNMP
• Supports digital and analog modulation including P25 phase 1 & 2
Oscillation Detection and Automatic Gain Control (AGC)• Built-in oscillation control and self-healing
• Shutdown in the event of non-correctable severe conditions
Alarms• System (PLL)
• Isolation
• PA Shutdown (UL/DL)
• Power Failure
• Antenna DL VSWR (Can be disabled)
• Antenna UL VSWR (Can be disabled)
• Manual Amp off
• All alarms trigger Summary Dry contact
Supported LED Status• Power
• Isolation
• Oscillation (OSC)
• Alarm
Ordering Information
CS14-710-810 PS51080 .5W BDA (Direct Replacement for CS14-700-800)
PS51080-SNMP NFPA Public Safety Signal Booster
Copyright © 2019 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Kentrox, and Optima Management System are registered trademarks of Westell, Inc. All other names are trademarks of their respective owners. Information is correct at time of printing and is subject to change without notice. Westell, Inc. is an Equal Opportunity/Affirmative Action employer.
WESTELL .COM
IBW-CS14-710-810_PS51080BDA-DS-121219
Page 2 of 2
PS51080-SNMP NFPA Public Safety Signal Booster
Electrical Specifications
Power Requirements 0.5 Amps @ 110 VAC – 60 Hz
Linear Output Power 27 dBm
Noise Figure @ Max Gain <5 dB, Typical
AGC Dynamic Range 25 dB
Propagation Delay <4 µsec
Gain Adjustment Range 30 dB, 1 dB Steps
VSWR < 2:1
Mechanical Specifications
Dimensions (L x H x D) 11.46 x 16.76 x 3.23 in
Weight 14.5 lbs.
Weatherproofing IP65, NEMA Type 4
Connectors
Antenna Ports N-Female
User Interface (GUI) RJ-45
Alarm Relay 9P D-SUB, Female
Operating Temperature -30° to 50° C
DRY Contact Alarms
Alarm One AC Power/System
Alarm Two Active RF Emitting Device Malfunction
Alarm Three Donor/Server Antenna Malfunction
![Model PS51080-SNMP NFPA 72 Public Safety …...Cop ri]ht estell nc All Ri]hts Reser e7 estell Clear inh entro an ptima Mana]ement S stem are re]istere tra7emarhs o estell nc All other](https://static.fdocuments.net/doc/165x107/5e28d75db380bd2dd52432b2/model-ps51080-snmp-nfpa-72-public-safety-cop-riht-estell-nc-all-rihts-reser.jpg)
